Upgrade new DellEMC platforms to Bullseye #9
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Co-authored-by: richardyu-ms <[email protected]>
d8ca31c (origin/master, origin/HEAD, master) [vnet/vxlan] Add support of multiple mappers for the VxLAN tunnel (sonic-net#1843) 7280e19 [orchagent][ports] Add port reference increment / decrement to lag member add / remove flows (sonic-net#1825) 0217b66 [nhg]: Add support for weight in nexthop group member. (sonic-net#1853) df96059 VOQ: Nexthop for remote VOQ LC should be created on inband OIF. (sonic-net#1823) 8f7ea14 Code changes to support IPv6 Link local enhancements (sonic-net#1463) 8674b3c Open record file in append mode (sonic-net#1845) Signed-off-by: Andriy Yurkiv <[email protected]>
…t#7992) Why I did it [DPB] BGP_NEIGHBOR yang model causing DPB errors. How I did it Allowed the BGP_NEIGHBOR list with just IP as the key to allow the current BGP neighbor table in the community. How to verify it Built the SONIC YANG models.
Update FRR 7.5.1 head.
This PR for submodule update adds the following commits ce51894 [Y-Cable] add the definition inside setup.py to include sonic_y_cable.credo as a package (sonic-net#211) Signed-off-by: vaibhav-dahiya <[email protected]>
strncpy calls need to be mindful about the destination buffer size passed in and doing an explicit null termination. Signed-off-by: Saikrishna Arcot <[email protected]>
With a Bullseye base image, and PTF being based on Stretch, if there are autogenerated files that are reused from the Bullseye build for Stretch, then autoconf-based packages will fail. This is because the default set of CFLAGS that dpkg passes in includes `-ffile-prefix-map=`, which is not a supported flag with the GCC in Stretch. Then, when running `make clean` in a Stretch environment, make will try to regenerate the autoconf-based files with the cached set of CFLAGS from Bullseye. This causes an error, since that flag is unknown. To work around this, after each build, clean up all built objects and autogenerated files. This makes sure that it is cleaned up in the same environment as the build environment. Note that this issue affects just autoconf packages. For apps using just regular Makefiles, they will probably be fine (they'll still be cleaned up as well). Signed-off-by: Saikrishna Arcot <[email protected]>
Signed-off-by: Saikrishna Arcot <[email protected]>
The start template script that this value is used in will determine what network namespace to use, and will add --net=host if it needs to run in the host namespace. With Docker 20.10, if --net=host is specified twice in docker run, then it errors out. Therefore, remove the explicit --net=host in the run options setting and let the start template script specify it. Signed-off-by: Saikrishna Arcot <[email protected]>
In version 3.0.0, If a broadcast address is specified in /etc/network/interfaces, then when ifup is run, it will fail with an error saying `'str' object has no attribute 'packed'`. This appears to be because it expects all attributes for an interface to be "packable" into a compact binary representation. However, it doesn't actually convert the broadcast address into an IPNetwork object (other addresses are handled). Therefore, convert the broadcast address it reads in from a str to an IPNetwork object. Also explicitly specify the scope of the loopback address in /etc/network/interfaces as host scope. Otherwise, it will get added as global scope by default. As part of this, use JSON to parse ip's output instead of text, for robustness. Signed-off-by: Saikrishna Arcot <[email protected]>
When using dpkg with the --root flag to install a deb package in a chroot, dpkg checks to see if the users and groups specified in the /var/lib/dpkg/statoverride file are valid. The problem is, it checks against the host system's /etc/passwd and /etc/group files, instead of /etc/passwd and /etc/group inside the chroot. In the slave image for Buster, cron appears to have been automatically installed, and so the crontab group existed. This doesn't appear to be true for Bullseye, so explicitly install it. This makes sure that the crontab group exists on the slave image itself. Also install the mock python 3 package, this is needed by some test. Signed-off-by: Saikrishna Arcot <[email protected]>
Updated SAI/SDK package to 20210811. Includes fix for pfc_wd. Signed-off-by: Roman Savchuk <[email protected]>
Fix sonic-net#7968 Issue is detected on SONiC.20201231.11 In test_static_route.py::test_static_route_ecmp static routes are configured, but neighbors are not resolved after config reload even after 10 minutes. It looks like the arp_update script is starting to ping when Vlan1000 is not fully configured. When issue is reproduced, stuck ping6 process is observed in swss container : USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 180 0.1 0.0 6296 1272 pts/0 S 17:03 0:03 ping6 -I Vlan1000 -n -q -i 0 -c 1 -W 0 ff02::1 And when arp_update script successfully resolves neighbors, we observe sleep 300 instead of ping process
Fix sonic-net#6943 This change makes the template match PREFIX_SET and the documentation. Signed-off-by: Christian Svensson <[email protected]>
Modify accton_as5835_54x_util.py to support python3 and remove not needed code. Signed-off-by: Jostar Yang <[email protected]>
To pick up new PSU fan support from new hw-mgmt release Signed-off-by: Kebo Liu <[email protected]>
Deliver sfputil support for sfputil show eeprom and sfputil reset along with some component test case fixes Co-authored-by: Carl Keene <[email protected]>
…onic-net#8400) Master/202012 image size grew quite a bit. 3.7G harddrive can no longer hold one image and safely upgrade to another image. Every bit of harddrive space is precious to save now. Also sh syntax seemingly changed, [ condition ] && action was a legit syntax in 201911 branch but it is an error when condition not met with 202012 or later images. Change the syntax to if statement to avoid the issue. Signed-off-by: Ying Xie [email protected]
* Adding SKU Mellanox-SN3800-D100C12S2 Co-authored-by: Madhan Babu <[email protected]>
…on BRCM platforms (sonic-net#8472)
Add QSFP reset and lpmode sysfs Signed-off-by: Jostar Yang <[email protected]>
…#8289) If branch exist already, today FRR build fails. Branch may exist on rebuild. With this PR, we will Checkout branch gracefully if branch exists already. Signed-off-by: Praveen Chaudhary<[email protected]>
…msn4700 and msn4800 (sonic-net#8387) #### Why I did it The values of the syseeprom were not valid #### How I did it I took the correct hexdump values from a real switch and created this hex file again #### How to verify it decode-syseeprom will display the new values
#### Why I did it
Use a predefined variable to get vendor information when the swss docker container is created
#### How I did it
Use `{{ sonic_asic_platform }}` instead of `$SONIC_CFGGEN -y /etc/sonic/sonic_version.yml -v asic_type`
#### How to verify it
Manually test.
…ts (sonic-net#8227) with state of tdport from previous warm-reboot. In case LAG was down before reboot, lacp->wr is not cleared. In lacp_event_watch_port_flush_data we incremented nr_of_tdports and add tdport to lacp->wr.state. In case lacp->wr.state already had this tdport we do not set new state for tdport but appened a new item in lacp->wr.state. In case we preformed warm-reboot and PortChannel member was down, after reboot PortChannel member became up next warm-reboot will initialize teamd with PortChannel member in down state. Fix this issue by calling stop_wr_mode() when LAG was down. This was probably intended but missed. #### Why I did it To fix an issue seen in warm-reboot-sad test cases. #### How I did it I fixed it in SONiC libteam patch that adds warm-reboot support. Details in commit description. #### How to verify it Run warm-reboot-sad test on t0-56 topology.
Co-authored-by: Zhi Yuan (Carl) Zhao <[email protected]> Why I did it To support dynamic port breakout Broadcom configurations on Arista platforms. How I did it Updated platform.json for platforms and added new hwsku, Broadcom config, and hwsku.json for dynamic port breakout usage. The name of the new hwsku name used is very similar to the platform name (platform x86_64-arista_7050_qx32s hwsku Arista-7050QX-32S) as the flex hwsku is meant to be the default in the future. How to verify it Boot up device with the new hwsku, interfaces are up. Change hwsku.json with new default breakout mode and reload device, breakout will have successfully been applied.
…t#8486) Update sonic-swss submodule to include the latest changes: Add autoconf-archive package to lgtm sonic-net/sonic-swss#1868 [cfgmgr] Update Makefile.am to consume lib zmq sonic-net/sonic-swss#1864 Fix warmboot issue PR#sonic-net#8367 sonic-net/sonic-swss#1866
Update SDK\FW version to 4.4.3320\2008.3324. This version contains: New Features: * Add support for Fast Boot for SN3800 Bug Fixing: * In some cases, when the total number of allocations exceeds the resource limit, an error can occur due to incorrect resource release procedure. This issue is most likely to affect the following resources: flow counters, ACL actions, PBS, WJH filter, Tunnels, ECMP containers, MC (L2 &L3) * On Spectrum systems, when using Async Router API with IPV6, an error message in the log regarding failing to remove ECMP container may show up. This error is not functional and can be safely ignored. * On Spectrum-2 systems and above, when using warm boot, setting max_bridge_num to a value greater than 1968 will cause an error and potential crash. * Some Molex cables do not support speed after reboot Signed-off-by: Dror Prital <[email protected]>
Why I did it The SFP1 port was disabled in the default configuration. How I did it This commit enables the 10G front port for usage. This was done using a DX030 together with an Arista switch using bcmsh and phy diag xe0 dsc to figure out what lane mappings make sense. Validated on Celestica Seastone2 DX030. How to verify it Own a Celestica DX030 Connect the front SFP1 port to something. It works :-) You can do tcpdump -i Ethernet128 -n and you will see both incoming and outgoing LLDP.
…s DB (sonic-net#8583) Add code to interfaces-config.sh to configure eth1 in multi-asic containers so that they can access midplane subnet. Co-authored-by: Maxime Lorrillere <[email protected]>
…-net#9032) This commit more fully declares the HW capabilities of the Nokia-7215 platform. For example, support for the threshold values associated with each thermal sensor is described. The intent here is to inform the sonic-mgmt platform test cases of which HW features are supported. This commit must align with PR# 4521 within the sonic-mgmt git repo which is currently under review. Any changes to that PR will need to be reflected in this commit.
* [Nokia ixs7215] Platform API fixes
This commit delivers the following fixes
- Fix bug preventing access to second PSU eeprom
- Fix bug preventing updates to front panel PSU status led
- Fix SFP reset test case failure
* Fix LGTM alert
…le (sonic-net#8943) This is due to the SERVICE variable declared after reading a file #### Why I did it To fix an issue that dhcp_relay does not restart with swss. #### How I did it Fixed in the swss.sh script #### How to verify it sudo systemctl restart swss verify dhcp_relay restarts as well.
…up.py install` (sonic-net#8997) #### Why I did it Fix a recent build error introduced by a pre-release redis-py. This is a general issue because `python setup.py install` (ie `easy_instal`) does not ignore pre-release versions. The fix is suggested by pypa/setuptools#855 (comment)
Enable gbsyncd support for cisco platforms Signed-off-by: Sachin Naik [email protected] Why I did it To enable cisco gbsyncd container for cisco gearbox hardwares. How I did it Create symlink to gbsyncd.service.j2 to start gearbox systemd service. How to verify it Verify that the gbsyncd-cisco container started for x86_64-88_lc0_36fh_mo-r0 Line card root@localhost:/home/cisco# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 50d309ea9967 docker-sonic-telemetry:latest "/usr/local/bin/supe…" 26 minutes ago Up 6 minutes telemetry 65cebc9e181b docker-sonic-mgmt-framework:latest "/usr/local/bin/supe…" 26 minutes ago Up 6 minutes mgmt-framework 5a9b510da24d docker-snmp:latest "/usr/local/bin/supe…" 26 minutes ago Up 6 minutes snmp c291b0a1fc87 26195cc7c042 "/usr/bin/docker_ini…" 26 minutes ago Up 6 minutes dhcp_relay d85aa5e6b78c docker-router-advertiser:latest "/usr/bin/docker-ini…" 28 minutes ago Up 6 minutes radv 46c787329374 docker-lldp:latest "/usr/bin/docker-lld…" 28 minutes ago Up 6 minutes lldp 6643f53e4ceb docker-gbsyncd-cisco:latest "/usr/local/bin/supe…" 28 minutes ago Up 6 minutes gbsyncd-cisco f05ae8af4aaa docker-syncd:latest "/usr/local/bin/supe…" 28 minutes ago Up 6 minutes syncd 02e0e53b62cf docker-teamd:latest "/usr/local/bin/supe…" 28 minutes ago Up 6 minutes teamd fc7bc2dbb6a9 docker-orchagent:latest "/usr/bin/docker-ini…" 28 minutes ago Up 6 minutes swss 5c5147c986c9 docker-fpm-frr:latest "/usr/bin/docker_ini…" 28 minutes ago Up 6 minutes bgp 63b5ce3d4c80 docker-platform-monitor:latest "/usr/bin/docker_ini…" 28 minutes ago Up 6 minutes pmon 7e6f34dca0e5 docker-database:latest "/usr/local/bin/dock…" 28 minutes ago Up 29 minutes database Signed-off-by: Sachin Naik <[email protected]> Co-authored-by: Sachin Naik <[email protected]>
…counted in component hash calculation (sonic-net#8965) #### Why I did it Fixed an issue that changing SDK version leads to cache framework taking cached syncd RPC image rather then rebuilding syncd RPC based on new syncd with new SDK. Investigation showed that cache framework calculates a component hash based on direct dependencies. Syncd RPC image hash consists of two parts: one is the flags of syncd RPC (platform, ENABLE_SYNCD_RPC) and syncd RPC direct dependencies makefiles. None of the syncd RPC direct dependencies are modified when SDK version changes, so hash is unchanged. #### How I did it To fix this issue, include the hash of dependencies into current component hash calculation, e.g.: In calcultation of the hash ```docker-syncd-mlnx-rpc.gz-274dfed3f52f2effa9989fc-39344350436f9b06d28b470.tgz```, the hash of syncd is included: ```docker-syncd-mlnx.gz-48ee88ac54b201e0e107b15-7bbea320025177a2121e440.tgz``` in which the hash of SDK is included. #### How to verify it Build with cache enabled and check that changing SDK version leads to a different hash of syncd rpc image: SDK version 4.5.1002: ``` docker-syncd-mlnx.gz-48ee88ac54b201e0e107b15-7bbea320025177a2121e440.tgz docker-syncd-mlnx-rpc.gz-274dfed3f52f2effa9989fc-39344350436f9b06d28b470.tgz ``` SDK version 4.5.1002-005: ``` docker-syncd-mlnx.gz-18baf952e3e0eda7cda7c3c-e5668f4784390d5dffd55af.tgz docker-syncd-mlnx-rpc.gz-4a6e59580eda110b5709449-552f76be135deaf750aeab2.tgz ```
…-net#9045) Signed-off-by: Neetha John <[email protected]> Why I did it Storage T0's have all vlan members as tagged How I did it Since currently minigraph does not have a unique way to identify if a vlan member is tagged/untagged and to ensure other scenarios are not broken, the logic used is to just update the vlan member type as 'tagged' when we determine that it is a storage backend device. This change will apply only to storage backend T0's since storage backend T1's will not have vlan member information How to verify it Updated the storage backend T0 testcases to check for tagged vlan members Added testcase to check if a T1 and backend T1 device generates an empty vlan member table Existing vlan member testcases are good enough for checking if any regression has been caused for regular T0's Build sonic_config_engine-1.0-py3-none-any.whl successfully
Signed-off-by: Guohan Lu <[email protected]>
…l module to 6.5.23 (sonic-net#9046) Manual verification on switch (TH3 device) admin@str2-xxxxx-01:~$ bcmcmd bsv bsv BRCM SAI ver: [6.0.0.10], OCP SAI ver: [1.9.1], SDK ver: [sdk-6.5.23] drivshell> admin@str2-xxxxx-01:~$ bcmcmd version version Broadcom Command Monitor: Copyright (c) 1998-2021 Broadcom Release: sdk-6.5.23 built 20211020 (Wed Oct 20 06:52:58 2021) From root@fedbbfdbee81:/__w/2/s/output/x86-xgsall-deb/hsdk Platform: X86 OS: Unix (Posix) Chips: BCM56640_A0, BCM56850_A0, BCM56340_A0, BCM56960_A0, BCM56860_A0, BCM56970_A0, BCM56870_A0, BCM56980_A0, BCM56980_B0, BCM56370_A0, BCM56275_A0, BCM56770_A0, Chips: BCM56780_A0, BCM56782_A0, BCM56784_A0, BCM56785_A0, BCM56786_A0, BCM56787_A0, BCM56788_A0, BCM56789_A0, BCM56880_A0, BCM56880_B0, BCM56881_A0, BCM56881_B0, BCM56883_A0, BCM56883_B0, BCM56990_A0, BCM56990_B0, BCM56991_B0, BCM56992_B0, BCM56996_A0, BCM56996_B0, BCM56997_A0, BCM56997_B0 Variant drivers: BCM56780_A0_CNA_1_2_10, BCM56780_A0_DNA_2_7_6_0, BCM56880_A0_CNA_1_2_9, BCM56880_A0_DNA_4_9_5_0 PHYs: BCM5400, BCM54182, BCM54185, BCM54180, BCM54140, BCM54192, BCM54195, BCM54190, BCM54194, BCM54210, BCM54220, BCM54280, BCM54282, BCM54240, BCM54285, BCM5428X, BCM54290, BCM54292, BCM54294, BCM54295, BCM54296, BCM56160-GPHY, BCM53540-GPHY, BCM56275-GPHY, BCM8750, BCM8752, BCM8754, BCM84740, BCM84164, BCM84758, BCM84780, BCM84784, BCM84318, BCM84328, Sesto, BCM82780, copper sfp drivshell>
…ta (sonic-net#8890) * [Arista] Remove building python2 * Add Wolverine linecard Co-authored-by: Zhi Yuan (Carl) Zhao <[email protected]>
…Table (sonic-net#8861) #### Why I did it Fixes sonic-net#8619 #### How I did it 1) Listening to CFG_DB notifications was migrated from ConfigDBConnector to SubscriberStateTable & Select 2) This change in design helped me to remove `update_all_features_config` which was roughly taking a 5-10 sec time to execute and thus the reason for blackout 3) Edited FeatureHandler, Feature & NtpCfgd classes to suit this design 4) Added corresponding mocks and UT's **Changes made to classes other than HostConfigDaemon:** With the previous design, the initially read data from the config db was applied by using hardcoded methods even before the config_db.listen() was called. For Eg: `update_all_features_config` for FeatureHandler and load() named methods for NtpCfgd etc But with this design, since the existing data is read and given out as a notification by SubscriberStateTable, i've pretty much removed these hardcoded methods. Thus changes made to these class will be around adapting them to the new design and no change in the actual functionality . #### How to verify it UT's: ``` tests/determine-reboot-cause_test.py ......... [ 29%] tests/procdockerstatsd_test.py . [ 32%] tests/caclmgrd/caclmgrd_dhcp_test.py ...... [ 51%] tests/hostcfgd/hostcfgd_radius_test.py .. [ 58%] tests/hostcfgd/hostcfgd_test.py ............. [100%] ``` Verified manually, ``` Sep 10 22:53:25.662621 sonic INFO systemd[1]: hostcfgd.service: Succeeded. Sep 10 22:55:04.127719 sonic INFO /hostcfgd: ConfigDB connect success Sep 10 22:55:04.128108 sonic INFO /hostcfgd: KdumpCfg init ... Sep 10 22:55:04.148819 sonic INFO /hostcfgd: Waiting for systemctl to finish initialization Sep 10 22:55:04.163452 sonic INFO /hostcfgd: systemctl has finished initialization -- proceeding ... Sep 10 22:55:04.163834 sonic INFO /hostcfgd: Kdump handler... Sep 10 22:55:04.164019 sonic INFO /hostcfgd: Kdump global configuration update Sep 10 22:55:04.758784 sonic INFO hostcfgd[184471]: kdump is already disabled Sep 10 22:55:04.758876 sonic INFO hostcfgd[184471]: Kdump is already disabled Sep 10 22:55:05.182021 sonic INFO hostcfgd[184511]: Kdump configuration has been updated in the startup configuration Sep 10 22:55:05.596919 sonic INFO hostcfgd[184528]: Kdump configuration has been updated in the startup configuration Sep 10 22:55:06.140627 sonic INFO /hostcfgd: Feature nat is stopped and disabled Sep 10 22:55:06.642629 sonic INFO /hostcfgd: Feature telemetry is enabled and started Sep 10 22:55:07.101297 sonic INFO /hostcfgd: Feature pmon is enabled and started Sep 10 22:55:07.554366 sonic INFO /hostcfgd: Feature database is enabled and started Sep 10 22:55:08.009329 sonic INFO /hostcfgd: Feature mgmt-framework is enabled and started Sep 10 22:55:08.394952 sonic INFO /hostcfgd: Feature macsec is stopped and disabled Sep 10 22:55:08.782853 sonic INFO /hostcfgd: Feature snmp is enabled and started Sep 10 22:55:09.205381 sonic INFO /hostcfgd: Feature teamd is enabled and started Sep 10 22:55:09.224877 sonic INFO /hostcfgd: Feature what-just-happened is enabled and started Sep 10 22:55:09.627929 sonic INFO /hostcfgd: Feature lldp is enabled and started Sep 10 22:55:10.086993 sonic INFO /hostcfgd: Feature swss is enabled and started Sep 10 22:55:10.170312 sonic INFO /hostcfgd: cmd - service aaastatsd stop Sep 10 22:55:11.012236 sonic INFO /hostcfgd: cmd - service aaastatsd stop Sep 10 22:55:12.225946 sonic INFO /hostcfgd: Feature bgp is enabled and started Sep 10 22:55:12.712792 sonic INFO /hostcfgd: Feature dhcp_relay is enabled and started Sep 10 22:55:13.166656 sonic INFO /hostcfgd: Feature sflow is stopped and disabled Sep 10 22:55:13.593639 sonic INFO /hostcfgd: Feature radv is enabled and started Sep 10 22:55:14.034106 sonic INFO /hostcfgd: Feature syncd is enabled and started Sep 10 22:55:14.113064 sonic INFO /hostcfgd: cmd - service aaastatsd stop Sep 10 22:55:14.863601 sonic INFO /hostcfgd: RADIUS_SERVER update: key: 10.10.10.1, op: SET, data: {'auth_type': 'pap', 'passkey': 'p*****', 'retransmit': '1', 'timeout': '1'} Sep 10 22:55:14.938605 sonic INFO /hostcfgd: cmd - service aaastatsd stop Sep 10 22:55:15.667545 sonic INFO /hostcfgd: RADIUS_SERVER update: key: 10.10.10.3, op: SET, data: {'auth_type': 'chap', 'passkey': 'p*****', 'retransmit': '2', 'timeout': '2'} Sep 10 22:55:15.667801 sonic INFO /hostcfgd: RADIUS (NAS) IP change - key:eth0, current global info {} Sep 10 22:55:15.746531 sonic INFO /hostcfgd: cmd - service aaastatsd stop Sep 10 23:04:47.435340 sonic INFO /hostcfgd: ntp server update key 0.debian.pool.ntp.org Sep 10 23:04:47.435661 sonic INFO /hostcfgd: ntp server update, restarting ntp-config, ntp servers configured {'0.debian.pool.ntp.org'} Sep 10 23:04:47.866394 sonic INFO /hostcfgd: NTP GLOBAL Update Sep 10 23:04:47.866557 sonic INFO /hostcfgd: ntp global update for source intf old {''} new {'eth0', 'Loopback0'}, restarting ntp-config Sep 10 23:16:25.157600 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl unmask sflow.service' Sep 10 23:16:25.178472 sonic INFO hostcfgd[192106]: Removed /etc/systemd/system/sflow.service. Sep 10 23:16:25.582018 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl enable sflow.service' Sep 10 23:16:25.604534 sonic INFO hostcfgd[192123]: Created symlink /etc/systemd/system/sonic.target.wants/sflow.service → /lib/systemd/system/sflow.service. Sep 10 23:16:26.029416 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl start sflow.service' Sep 10 23:16:26.691927 sonic INFO /hostcfgd: Feature sflow is enabled and started ```
[schema] Add EXP to TC map config table (sonic-net#537) [CI]: Swap the python code coverage report with the cpp report (sonic-net#544) Remove SWIG generated files from coverage report (sonic-net#542) Update database defintions for PINs / P4Runtime (sonic-net#536) [ci]: Support code coverage (sonic-net#539) Fix the option missing in kernel config issue (sonic-net#541) Add SRV6 APP tables (sonic-net#538) [schema] Rename CBF config tables (sonic-net#535)
…X_COUNTER_DB (sonic-net#9100) Keep GB_ASIC_DB, etc consistent with the ones in sonic-swss-common/common/database_config.json
Sonic-swss-common requires gmock for staged unit tests Signed-off-by: Don Newton <[email protected]>
#### Why I did it Includes below commits ``` c2d4945 2021-09-17 | [snmp] Allow system with no ports in config db run without errors (sonic-net#221) [Lior Avramov] fccb21b 2021-08-30 | [RFC1213]: Initialize lag oid map in reinit_data instead of (sonic-net#232) [SuvarnaMeenakshi] ```
What I did: Fix the typo in Internal Peer Group template for Packet-based Chassis. Address Review comments of PR: [chassis-packet] minigraph parsing and BGP template changes sonic-net#8966 - Static Route Parsing for Host - Formatting of chassis port_config.ini
…c-net#8689) Updated CBF config packaging [build_templates]: Added default configuration file for CBF [rules]: Added loading rule for CBF config The CBF default config is required to load default start-up config on CBF capable platforms
saiarcot895
pushed a commit
that referenced
this pull request
Jan 25, 2022
* [BFN] Updated platform APIs impl Signed-off-by: Andriy Kokhan <[email protected]> * Extended BFN platform SFP APIs implementation * Update sfp.py * [BFN] Extended SFP platform plugin implementation Signed-off-by: Andriy Kokhan <[email protected]> * [BFN] Extended Fans platform plugin implementation * [BFN] divided classes Fan and FanDrawer into 2 files * Signed-off-by: Vadym Yashchenko <[email protected]> What I did Add get_model() function Add get_low_critical_threshold() function Change __get(...) function. How I did it Differnece from previous implementation of __get(...) function is return real value or -9999.9 if value is not provided by thrift API * Add get_presence() function and revised __get() function Signed-off-by: Vadym Yashchenko <[email protected]> * [BFN] Updated PSU platform APIs impl Signed-off-by: Dmytro Lytvynenko <[email protected]> * Added BFN PSU cache (#9) Signed-off-by: Andriy Kokhan <[email protected]> * [BFN] Fans and Fantray platform APIs update (#7) * [BFN] Updated SFP platform APIs (#10) Signed-off-by: Volodymyr Boyko <[email protected]> * [BFN] Updated platform API for thermal (#8) * Signed-off-by: Vadym Yashchenko <[email protected]> * Revert "[BFN] Fans and Fantray platform APIs update (#7)" (#11) This reverts commit c62a733. * Add support health monitor system (#15) Signed-off-by: Petro Bratash <[email protected]> * Update chassis.py * [BFN] Updated FANs and FAN Tray platform API (#14) * Fix fix_alignment (#17) Signed-off-by: Petro Bratash <[email protected]> * [BFN] Improvement show environment (#16) * Added PSU temperature skip into platform.json (#18) Signed-off-by: Andriy Kokhan <[email protected]> * Do not skip psud on Newport Signed-off-by: Andriy Kokhan <[email protected]> * [BFN] fix fan status from Not OK to Ok (#19) * [BFN] Updated SFP platform plugin (#13) Signed-off-by: Volodymyr Boyko <[email protected]> * [DPB] Fix typo for Ethernet0 2x200G[100G,40G] breakout mode (#21) Signed-off-by: Mykola Gerasymenko <[email protected]> * [barefoot] Tmp fix vendor_rev (#22) Signed-off-by: Volodymyr Boyko <[email protected]> * Fixed python issues in sonic_platform/fan_drawer.py Signed-off-by: Andriy Kokhan <[email protected]> * Updated fan_drawer.py * Fixing trailing white spaces in fan_drawer.py * [BFN] Fix thrift for SFPs API Signed-off-by: Volodymyr Boyko <[email protected]> * In platform.json, replaced 'false' with '0' to workaround ast.literal_eval() issue Signed-off-by: Andriy Kokhan <[email protected]> * [Newport] Thermal manager (sonic-net#23) * Signed-off-by: Vadym Yashchenko <[email protected]> * Revert "In platform.json, replaced 'false' with '0' to workaround ast.literal_eval() issue" This reverts commit 1e73127. * Removed 'controllable' options from platform.json to fix factory default config generation Signed-off-by: Andriy Kokhan <[email protected]> * Update thermal_manager.py * Migrated SFP plugin to sonic_xcvr API (sonic-net#30) Signed-off-by: Andriy Kokhan <[email protected]> Co-authored-by: KostiantynYarovyiBf <[email protected]> Co-authored-by: Vadym Yashchenko <[email protected]> Co-authored-by: Dmytro Lytvynenko <[email protected]> Co-authored-by: Volodymyr Boiko <[email protected]> Co-authored-by: Petro Bratash <[email protected]> Co-authored-by: Mykola Gerasymenko <[email protected]>
saiarcot895
pushed a commit
that referenced
this pull request
Jan 25, 2022
[sonic-linkmgrd][master] submodule update Commits added: 0c23756 Jing Zhang 2022-01-19 Linkmgrd subscribing State DB route event (#13) 12b9951 Longxiang Lyu 2021-12-13 Add TLV support to ICMP payload (#11) 3eedda3 Longxiang Lyu 2022-01-06 Add missing intermediate states (#16) 8da4982 Ying Xie 2022-01-04 [linkmgrd] update README, set coding style guidance (#15) a897cf8 Longxiang Lyu 2021-12-13 Improve PR template (#16) 6fec701 Jing Zhang 2021-12-06 Add pull request template for linkmgrd repo (#9) signed-off-by: Jing Zhang [email protected]
saiarcot895
pushed a commit
that referenced
this pull request
Feb 16, 2022
[sonic-linkmgrd][master] submodule update Commits added: 0c23756 Jing Zhang 2022-01-19 Linkmgrd subscribing State DB route event (#13) 12b9951 Longxiang Lyu 2021-12-13 Add TLV support to ICMP payload (#11) 3eedda3 Longxiang Lyu 2022-01-06 Add missing intermediate states (#16) 8da4982 Ying Xie 2022-01-04 [linkmgrd] update README, set coding style guidance (#15) a897cf8 Longxiang Lyu 2021-12-13 Improve PR template (#16) 6fec701 Jing Zhang 2021-12-06 Add pull request template for linkmgrd repo (#9) signed-off-by: Jing Zhang [email protected]
saiarcot895
pushed a commit
that referenced
this pull request
Oct 28, 2022
#### Why I did it Update sonic-host-services submodule to include below commits: ``` bc8698d Merge pull request #21 from abdosi/feature 557a110 Fix the issue where if dest port is not specified in ACL rule than for multi-asic where we create NAT rule to forward traffic from Namespace to host fail with exception. 6e45acc (master) Merge pull request #14 from abdosi/feature 4d6cad7 Merge remote-tracking branch 'upstream/master' into feature bceb13e Install libyang to azure pipeline (#20) 82299f5 Merge pull request #13 from SuvarnaMeenakshi/cacl_fabricns 15d3bf4 Merge branch 'master' into cacl_fabricns de54082 Merge pull request #16 from ZhaohuiS/feature/caclmgrd_external_client_warning_log b4b368d Add warning log if destination port is not defined d4bb96d Merge branch 'master' into cacl_fabricns 35c76cb Add unit-test and fix typo. 17d44c2 Made Changes to be Python 3.7 compatible 978afb5 Aligning Code 1fbf8fb Merge remote-tracking branch 'upstream/master' into feature 7b8c7d1 Added UT for the changes 91c4c42 Merge pull request #9 from ZhaohuiS/feature/caclmgrd_external_client 7c0b56a Add 4 test cases for external_client_acl, including single port and port range for ipv4 and ipv6 b71e507 Merge remote-tracking branch 'origin/master' into HEAD d992dc0 Merge branch 'master' into feature/caclmgrd_external_client bd7b172 DST_PORT is configuralbe in json config file for EXTERNAL_CLIENT_ACL f9af7ae [CLI] Move hostname, mgmt interface/vrf config to hostcfgd (#2) 70ce6a3 Merge pull request #10 from sujinmkang/cold_reset 29be8d2 Added Support to render Feature Table using Device running metadata. Also added support to render 'has_asic_scope' field of Feature Table. 3437e35 [caclmgrd][chassis]: Add ip tables rules to accept internal docker traffic from fabric asic namespaces. 8720561 Fix and add hardware reboot cause determination tests 0dcc7fe remove the empty bracket if no hardware reboot cause minor e47d831 fix the wrong expected result comparision ef86b53 Fix startswith Attribute error 8a630bb fix mock patch 8543ddf update the reboot cause logic and update the unit test 53ad7cd fix the mock patch function 7c8003d fix the reboot-cause regix for test 1ba611f fix typo 25379d3 Add unit test case a56133b Add hardware reboot cause as actual reboot cause for soft reboot failed c7d3833 Support Restapi/gnmi control plane acls f6ea036 caclmgrd: Don't block traffic to mgmt by default a712fc4 Update test cases adc058b caclmgrd: Don't block traffic to mgmt by default 06ff918 Merge pull request #7 from bluecmd/patch-1 e3e23bc ci: Rename sonic-buildimage repository e83a858 Merge pull request #4 from kamelnetworks/acl-ip2me-test f5a2e50 [caclmgrd]: Tests for IP2ME rules generation ```
saiarcot895
pushed a commit
that referenced
this pull request
Oct 18, 2023
Why I did it Advance dhcpmon to a3c5381 in 202305 branch. a3c5381 - (HEAD, origin/master, origin/HEAD, master) Merge pull request src: Add libnl3 build.sh script #11 from jcaiMR/dev/jcai_fix_err_log (11 days ago) [StormLiangMS] c5ef7e7 - Change common_libs dependencies from buster to bullseye (Updating docker-orchagent/syncd Dockerfile and start.sh #9) 824a144 - replace atoi with strtol (Rename hostname #6) (10 weeks ago) [Mai Bui] 32c0c3f - Fix libswsscommon package installation for non-amd64 (README.md leaves out docker-database #7) (10 weeks ago) [Saikrishna Arcot] Work item tracking Microsoft ADO (25048723): How I did it How to verify it Run test_dhcp_relay.py, no failure
saiarcot895
pushed a commit
that referenced
this pull request
Dec 20, 2023
…ic-net#17413) ### Why I did it 1. Protobuf 3.21 has been released in the Debian bookworm 2. Update submodule sonic-swss and sonic-dash-api because they include related updates. ##### Work item tracking - Microsoft ADO **(number only)**: #### How I did it 1. In the protobuf.mk, If it isn't bullseye, ignore to compile the protobuf package 2. Move sonic-swss commits: ``` fd852084 (HEAD, origin/master, origin/HEAD) [dashrouteorch]: Rename dash route namespace (sonic-net#2966) ``` 3. Move sonic-dash-api and move build chain to its submodule ``` d4448c7 (HEAD, origin/master, origin/HEAD, master) [azp]: Add multi-platform artifacts (#11) 8a5e5cc [debian]: Add debian package (#10) d96163a [misc]: Add dash utils and its tests (#9) ``` #### How to verify it Check Azp
saiarcot895
pushed a commit
that referenced
this pull request
Jul 31, 2024
…buf (sonic-net#17521) * [submodule]: Update submodule sonic-swss/sonic-dash-api/protobuf (sonic-net#17413) 1. Protobuf 3.21 has been released in the Debian bookworm 2. Update submodule sonic-swss and sonic-dash-api because they include related updates. - Microsoft ADO **(number only)**: 1. In the protobuf.mk, If it isn't bullseye, ignore to compile the protobuf package 2. Move sonic-swss commits: ``` fd852084 (HEAD, origin/master, origin/HEAD) [dashrouteorch]: Rename dash route namespace (sonic-net#2966) ``` 3. Move sonic-dash-api and move build chain to its submodule ``` d4448c7 (HEAD, origin/master, origin/HEAD, master) [azp]: Add multi-platform artifacts (#11) 8a5e5cc [debian]: Add debian package (#10) d96163a [misc]: Add dash utils and its tests (#9) ``` Signed-off-by: Ze Gan <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Why I did it
Upgrade DellEMC platforms to bullseye.
How I did it
Modified Dell platform files
How to verify it
Execute platform related commands and verify the behavior.
Which release branch to backport (provide reason below if selected)
Description for the changelog
A picture of a cute animal (not mandatory but encouraged)