Change log for SqlServerDsc

Unreleased

Changes to SqlServerDsc
- Added SqlAgentAlert resource.
- Opt-in to the common test 'Common Test - Validation Localization'.
- Opt-in to the common test 'Common Test - Flagged Script Analyzer Rules' (issue #1101).
- Removed the helper function New-TerminatingError, New-WarningMessage and New-VerboseMessage in favor of the the new localization helper functions.
- Combine DscResource.LocalizationHelper and DscResource.Common into SqlServerDsc.Common (issue #1357).
- Update Assert-TestEnvironment.ps1 to not error if strict mode is enabled and there are no missing dependencies (issue #1368).
Changes to SqlServerDsc.Common
- Added StatementTimeout to function 'Connect-SQL' with default 600 seconds (10mins).
- Added StatementTimeout to function 'Invoke-Query' with default 600 seconds (10mins) (issue #1358).
- Changes to helper function Connect-SQL
  - The function now make it more clear that when using the parameter SetupCredential is impersonates that user, and by default it does not impersonates a user but uses the credential that the resource is run as (for example the built-in credential parameter PsDscRunAsCredential). @kungfu71186
  - Added parameter alias -DatabaseCredential for the parameter -SetupCredential. @kungfu71186
Changes to SqlAG
- Added en-US localization.
Changes to SqlAGReplica
- Added en-US localization.
- Improved verbose message output when creating availability group replica, removing a availability group replica, and joining the availability group replica to the availability group.
Changes to SqlAlwaysOnService
- Now outputs the correct verbose message when restarting the service.
Changes to SqlServerMemory
- Now outputs the correct verbose messages when calculating the dynamic memory, and when limiting maximum memory.
Changes to SqlServerRole
- Now outputs the correct verbose message when the members of a role is not in desired state.
Changes to SqlAgentOperator
- Fix minor issue that when unable to connect to an instance. Instead of showing a message saying that connect failed another unrelated error message could have been shown, because of an error in the code.
- Fix typo in test it block.
Changes to SqlDatabaseRole
- BREAKING CHANGE: Refactored to enable creation/deletion of the database role itself as well as management of the role members. Note that the resource no longer adds database users. (issue #845, issue #847, issue #1252, issue #1339). Paul Shamus @pshamus
Changes to SqlSetup
- Add an Action type of 'Upgrade'. This will ask setup to do a version upgrade where possible (issue #1368).
- Fix an error when testing for DQS installation (issue #1368).
- Changed the logic of how default value of FailoverClusterGroupName is set since that was preventing the resource to be able to be debugged (issue #448).
- Added RSInstallMode parameter (issue #1163).
Changes to SqlWindowsFirewall
- Where a version upgrade has changed paths for a database engine, the existing firewall rule for that instance will be updated rather than another one created (issue #1368). Other firewall rules can be fixed to work in the same way later.
Changes to SqlAGDatabase
- Added new parameter 'ReplaceExisting' with default false. This allows forced restores when a database already exists on secondary.
- Added StatementTimeout to Invoke-Query to fix Issue#1358
- Fix issue where calling Get would return an error because the database name list may have been returned as a string instead of as a string array (issue #1368).
Changes to common module: Invoke-Query
- Fixes issues in issue #1355
- Works together with Connect-SQL now
- Parameters and Aliases now match that of Connect-SQL
- Can now pass in credentials
- Can now pass in 'Microsoft.SqlServer.Management.Smo.Server' object
- Can also pipe in 'Microsoft.SqlServer.Management.Smo.Server' object
- Can pipe Connect-SQL | Invoke-Query
- Added default vaules to Invoke-Query

12.5.0.0

Changes to SqlServerSecureConnection
- Updated README and added example for SqlServerSecureConnection, instructing users to use the 'SYSTEM' service account instead of 'LocalSystem'.
Changes to SqlScript
- Correctly passes the $VerbosePreference to the helper function Invoke-SqlScript so that PRINT statements is outputted correctly when verbose output is requested, e.g Start-DscConfiguration -Verbose.
- Added en-US localization (issue #624).
- Added additional unit tests for code coverage.
Changes to SqlScriptQuery
- Correctly passes the $VerbosePreference to the helper function Invoke-SqlScript so that PRINT statements is outputted correctly when verbose output is requested, e.g Start-DscConfiguration -Verbose.
- Added en-US localization.
- Added additional unit tests for code coverage.
Changes to SqlSetup
- Concatenated Robocopy localization strings (issue #694).
- Made the error message more descriptive when the Set-TargetResource function calls the Test-TargetResource function to verify the desired state.
Changes to SqlWaitForAG
- Added en-US localization (issue #625).
Changes to SqlServerPermission
- Added en-US localization (issue #619).
Changes to SqlServerMemory
- Added en-US localization (issue #617).
- No longer will the resource set the MinMemory value if it was provided in a configuration that also set the Ensure parameter to 'Absent' (issue #1329).
- Refactored unit tests to simplify them add add slightly more code coverage.
Changes to SqlServerMaxDop
- Added en-US localization (issue #616).
Changes to SqlRS
- Reporting Services are restarted after changing settings, unless $SuppressRestart parameter is set (issue #1331). $SuppressRestart will also prevent Reporting Services restart after initialization.
- Fixed one of the error handling to use localization, and made the error message more descriptive when the Set-TargetResource function calls the Test-TargetResource function to verify the desired state. This was done prior to adding full en-US localization.
- Fixed (issue #1258). When initializing Reporting Services, there is no need to execute InitializeReportServer CIM method, since executing SetDatabaseConnection CIM method initializes Reporting Services.
- issue #864 SqlRs can now initialise SSRS 2017 instances
Changes to SqlServerLogin
- Added en-US localization (issue #615).
- Added unit tests to improved code coverage.
Changes to SqlWindowsFirewall
- Added en-US localization (issue #614).
Changes to SqlServerEndpoint
- Added en-US localization (issue #611).
Changes to SqlServerEndpointPermission
- Added en-US localization (issue #612).
Changes to SqlServerEndpointState
- Added en-US localization (issue #613).
Changes to SqlDatabaseRole
- Added en-US localization (issue #610).
Changes to SqlDatabaseRecoveryModel
- Added en-US localization (issue #609).
Changes to SqlDatabasePermission
- Added en-US localization (issue #608).
Changes to SqlDatabaseOwner
- Added en-US localization (issue #607).
Changes to SqlDatabase
- Added en-US localization (issue #606).
Changes to SqlAGListener
- Added en-US localization (issue #604).
Changes to SqlAlwaysOnService
- Added en-US localization (issue #603).
Changes to SqlAlias
- Added en-US localization (issue #602).
- Removed ShouldProcess for the code, since it has no purpose in a DSC resource (issue #242).
Changes to SqlServerReplication
- Added en-US localization (issue #620).
- Refactored Get-TargetResource slightly so it provide better verbose messages.

12.4.0.0

Changes to SqlServerDsc
- Added new resources.
  - SqlRSSetup
- Added helper module DscResource.Common from the repository DscResource.Template.
  - Moved all helper functions from SqlServerDscHelper.psm1 to DscResource.Common.
  - Renamed Test-SqlDscParameterState to Test-DscParameterState.
  - New-TerminatingError error text for a missing localized message now matches the output even if the "missing localized message" localized message is also missing.
- Added helper module DscResource.LocalizationHelper from the repository DscResource.Template, this replaces the helper module CommonResourceHelper.psm1.
- Cleaned up unit tests, mostly around loading cmdlet stubs and loading classes stubs, but also some tests that were using some odd variants.
- Fix all integration tests according to issue PowerShell/DscResource.Template#14.
Changes to SqlServerMemory
- Updated Cim Class to Win32_ComputerSystem (instead of Win32_PhysicalMemory) because the correct memory size was not being detected correctly on Azure VMs (issue #914).
Changes to SqlSetup
- Split integration tests into two jobs, one for running integration tests for SQL Server 2016 and another for running integration test for SQL Server 2017 (issue #858).
- Localized messages for Master Data Services no longer start and end with single quote.
- When installing features a verbose message is written if a feature is found to already be installed. It no longer quietly removes the feature from the /FEATURES argument.
- Cleaned up a bit in the tests, removed excessive piping.
- Fixed minor typo in examples.
- A new optional parameter FeatureFlag parameter was added to control breaking changes. Functionality added under a feature flag can be toggled on or off, and could be changed later to be the default. This way we can also make more of the new functionalities the default in the same breaking change release (issue #1105).
- Added a new way of detecting if the shared feature CONN (Client Tools Connectivity, and SQL Client Connectivity SDK), BC (Client Tools Backwards Compatibility), and SDK (Client Tools SDK) is installed or not. The new functionality is used when the parameter FeatureFlag is set to 'DetectionSharedFeatures' (issue #1105).
- Added a new helper function Get-InstalledSharedFeatures to move out some of the code from the Get-TargetResource to make unit testing easier and faster.
- Changed the logic of 'Build the argument string to be passed to setup' to not quote the value if root directory is specified (issue #1254).
- Moved some resource specific helper functions to the new helper module DscResource.Common so they can be shared with the new resource SqlRSSetup.
- Improved verbose messages in Test-TargetResource function to more clearly tell if features are already installed or not.
- Refactored unit tests for the functions Test-TargetResource and Set-TargetResource to improve testing speed.
- Modified the Test-TargetResource and Set-TargetResource to not be case-sensitive when comparing feature names. This was handled correctly in real-world scenarios, but failed when running the unit tests (and testing casing).
Changes to SqlAGDatabase
- Fix MatchDatabaseOwner to check for CONTROL SERVER, IMPERSONATE LOGIN, or CONTROL LOGIN permission in addition to IMPERSONATE ANY LOGIN.
- Update and fix MatchDatabaseOwner help text.
Changes to SqlAG
- Updated documentation on the behaviour of defaults as they only apply when creating a group.
Changes to SqlAGReplica
- AvailabilityMode, BackupPriority, and FailoverMode defaults only apply when creating a replica not when making changes to an existing replica. Explicit parameters will still change existing replicas (issue #1244).
- ReadOnlyRoutingList now gets updated without throwing an error on the first run (issue #518).
- Test-Resource fixed to report whether ReadOnlyRoutingList desired state has been reached correctly (issue #1305).
Changes to SqlDatabaseDefaultLocation
- No longer does the Test-TargetResource fail on the second test run when the backup file path was changed, and the path was ending with a backslash (issue #1307).

12.3.0.0

Changes to SqlServerDsc
- Reverting the change that was made as part of the issue #1260 in the previous release, as it only mitigated the issue, it did not solve the issue.
- Removed the container testing since that broke the integration tests, possible due to using excessive amount of memory on the AppVeyor build worker. This will make the unit tests to take a bit longer to run (issue #1260).
- The unit tests and the integration tests are now run in two separate build workers in AppVeyor. One build worker runs the integration tests, while a second build worker runs the unit tests. The build workers runs in parallel on paid accounts, but sequentially on free accounts (issue #1260).
- Clean up error handling in some of the integration tests that was part of a workaround for a bug in Pester. The bug is resolved, and the error handling is not again built into Pester.
- Speeding up the AppVeyor tests by splitting the common tests in a separate build job.
- Updated the appveyor.yml to have the correct build step, and also correct run the build step only in one of the jobs.
- Update integration tests to use the new integration test template.
- Added SqlAgentOperator resource.
Changes to SqlServiceAccount
- Fixed Get-ServiceObject when searching for Integration Services service. Unlike the rest of SQL Server services, the Integration Services service cannot be instanced, however you can have multiple versions installed. Get-Service object would return the correct service name that you are looking for, but it appends the version number at the end. Added parameter VersionNumber so the search would return the correct service name.
- Added code to allow for using Managed Service Accounts.
- Now the correct service type string value is returned by the function Get-TargetResource. Previously one value was passed in as a parameter (e.g. DatabaseEngine), but a different string value as returned (e.g. SqlServer). Now Get-TargetResource return the same values that can be passed as values in the parameter ServiceType (issue #981).
Changes to SqlServerLogin
- Fixed issue in Test-TargetResource to valid password on disabled accounts (issue #915).
- Now when adding a login of type SqlLogin, and the SQL Server login mode is set to 'Integrated', an error is correctly thrown (issue #1179).
Changes to SqlSetup
- Updated the integration test to stop the named instance while installing the other instances to mitigate issue #1260.
- Add parameters to configure the Tempdb files during the installation of the instance. The new parameters are SqlTempdbFileCount, SqlTempdbFileSize, SqlTempdbFileGrowth, SqlTempdbLogFileSize and SqlTempdbLogFileGrowth (issue #1167).
Changes to SqlServerEndpoint
- Add the optional parameter Owner. The default owner remains the login used for the creation of the endpoint (issue #1251). Maxime Daniou (@mdaniou)
- Add integration tests (issue #744). Maxime Daniou (@mdaniou)

12.2.0.0

Changes to SqlServerDsc
- During testing in AppVeyor the Build Worker is restarted in the install step to make sure the are no residual changes left from a previous SQL Server install on the Build Worker done by the AppVeyor Team (issue #1260).
- Code cleanup: Change parameter names of Connect-SQL to align with resources.
- Updated README.md in the Examples folder.
  - Added a link to the new xADObjectPermissionEntry examples in ActiveDirectory, fixed a broken link and a typo. Adam Rush (@adamrushuk)
Change to SqlServerLogin so it doesn't check properties for absent logins.
- Fix for (issue #1096)

12.1.0.0

Changes to SqlServerDsc
- Add support for validating the code with the DSC ResourceKit Script Analyzer rules, both in Visual Studio Code and directly using Invoke-ScriptAnalyzer.
- Opt-in for common test "Common Tests - Validate Markdown Links".
- Updated broken links in \README.md and in \Examples\README.md
- Opt-in for common test 'Common Tests - Relative Path Length'.
- Updated the Installation section in the README.md.
- Updated the Contributing section in the README.md after Style Guideline and Best Practices guidelines has merged into one document.
- To speed up testing in AppVeyor, unit tests are now run in two containers.
- Adding the PowerShell script Assert-TestEnvironment.ps1 which must be run prior to running any unit tests locally with Invoke-Pester. Read more in the specific contributing guidelines, under the section Unit Tests.
Changes to SqlServerDscHelper
- Fix style guideline lint errors.
- Changes to Connect-SQL
  - Adding verbose message in Connect-SQL so it now shows the username that is connecting.
- Changes to Import-SQLPS
  - Fixed so that when importing SQLPS it imports using the path (and not the .psd1 file).
  - Fixed so that the verbose message correctly shows the name, version and path when importing the module SQLPS (it did show correctly for the SqlServer module).
Changes to SqlAg, SqlAGDatabase, and SqlAGReplica examples
- Included configuration for SqlAlwaysOnService to enable HADR on each node to avoid confusion (issue #1182).
Changes to SqlServerDatabaseMail
- Minor update to Ensure parameter description in the README.md.
Changes to Write-ModuleStubFile.ps1
- Create aliases for cmdlets in the stubbed module which have aliases (issue #1224). Dan Reist (@randomnote1)
- Use a string builder to build the function stubs.
- Fixed formatting issues for the function to work with modules other than SqlServer.
New DSC resource SqlServerSecureConnection
- New resource to configure a SQL Server instance for encrypted SQL connections.
Changes to SqlAlwaysOnService
- Updated integration tests to use NetworkingDsc (issue #1129).
Changes to SqlServiceAccount
- Fix unit tests that didn't mock some of the calls. It no longer fail when a SQL Server installation is not present on the node running the unit test (issue #983).

12.0.0.0

Changes to SqlServerDatabaseMail
- DisplayName is now properly treated as display name for the originating email address (issue #1200). Nick Reilingh (@NReilingh)
  - DisplayName property now defaults to email address instead of server name.
  - Minor improvements to documentation.
Changes to SqlAGDatabase
- Corrected reference to "PsDscRunAsAccount" in documentation (issue #1199). Nick Reilingh (@NReilingh)
Changes to SqlDatabaseOwner
- BREAKING CHANGE: Support multiple instances on the same node. The parameter InstanceName is now Key and cannot be omitted (issue #1197).
Changes to SqlSetup
- Added new parameters to allow to define the startup types for the Sql Engine service, the Agent service, the Analysis service and the Integration Service. The new optional parameters are respectively SqlSvcStartupType, AgtSvcStartupType, AsSvcStartupType, IsSvcStartupType and RsSvcStartupType (issue #1165. Maxime Daniou (@mdaniou)

11.4.0.0

Changes to SqlServerDsc
- Updated helper function Restart-SqlService to have to new optional parameters SkipClusterCheck and SkipWaitForOnline. This was to support more aspects of the resource SqlServerNetwork.
- Updated helper function Import-SQLPSModule
  - To only import module if the module does not exist in the session.
  - To always import the latest version of 'SqlServer' or 'SQLPS' module, if more than one version exist on the target node. It will still prefer to use 'SqlServer' module.
- Updated all the examples and integration tests to not use PSDscAllowPlainTextPassword, so examples using credentials or passwords by default are secure.
Changes to SqlAlwaysOnService
- Integration tests was updated to handle new IPv6 addresses on the AppVeyor build worker (issue #1155).
Changes to SqlServerNetwork
- Refactor SqlServerNetwork to not load assembly from GAC (issue #1151).
- The resource now supports restarting the SQL Server service when both enabling and disabling the protocol.
- Added integration tests for this resource (issue #751).
Changes to SqlAG
- Removed excess Import-SQLPSModule call.
Changes to SqlSetup
- Now after a successful install the "SQL PowerShell module" is reevaluated and forced to be reimported into the session. This is to support that a never version of SQL Server was installed side-by-side so that SQLPS module should be used instead.

11.3.0.0

Changes to SqlServerDsc
- Moved decoration for integration test to resolve a breaking change in DscResource.Tests.
- Activated the GitHub App Stale on the GitHub repository.
- Added a CODE_OF_CONDUCT.md with the same content as in the README.md issue #939.
- New resources:
  - Added SqlScriptQueryResource. Chase Wilson (@chasewilson)
- Fix for issue #779 Paul Kelly (@prkelly)

11.2.0.0

Changes to SqlServerDsc
- Added new test helper functions in the CommonTestHelpers module. These are used by the integration tests.
  - New-IntegrationLoopbackAdapter: Installs the PowerShell module 'LoopbackAdapter' from PowerShell Gallery and creates a new network loopback adapter.
  - Remove-IntegrationLoopbackAdapter: Removes a new network loopback adapter.
  - Get-NetIPAddressNetwork: Returns the IP network address from an IPv4 address and prefix length.
- Enabled PSSA rule violations to fail build in the CI environment.
- Renamed SqlServerDsc.psd1 to be consistent (issue #1116). Glenn Sarti (@glennsarti)
Changes to Unit Tests
- Updated the following resources unit test template to version 1.2.1
  - SqlWaitForAG (issue #1088). Michael Fyffe (@TraGicCode)
Changes to SqlAlwaysOnService
- Updated the integration tests to use a loopback adapter to be less intrusive in the build worker environment.
- Minor code cleanup in integration test, fixed the scope on variable.
Changes to SqlSetup
- Updated the integration tests to stop some services after each integration test. This is to save memory on the AppVeyor build worker.
- Updated the integration tests to use a SQL Server 2016 Service Pack 1.
- Fixed Script Analyzer rule error.
Changes to SqlRS
- Updated the integration tests to stop the Reporting Services service after the integration test. This is to save memory on the AppVeyor build worker.
- The helper function Restart-ReportingServicesService should no longer timeout when restarting the service (issue #1114).
Changes to SqlServiceAccount
- Updated the integration tests to stop some services after each integration test. This is to save memory on the AppVeyor build worker.
Changes to SqlServerDatabaseMail
- Fixed Script Analyzer rule error.

11.1.0.0

Changes to SqlServerDsc
- Updated the PULL_REQUEST_TEMPLATE with an improved task list and modified some text to be clearer (issue #973).
- Updated the ISSUE_TEMPLATE to hopefully be more intuitive and easier to use.
- Added information to ISSUE_TEMPLATE that issues must be reproducible in SqlServerDsc resource module (if running the older xSQLServer resource module) (issue #1036).
- Updated ISSUE_TEMPLATE.md with a note about sensitive information (issue #1092).
Changes to SqlServerLogin
- Claudio Spizzi (@claudiospizzi): Fix password test fails for nativ sql users (issue #1048).
Changes to SqlSetup
- Michael Fyffe (@TraGicCode): Clarify usage of 'SecurityMode' along with adding parameter validations for the only 2 supported values (issue #1010).
- Now accounts containing '$' will be able to be used for installing SQL Server. Although, if the account ends with '$' it is considered a Managed Service Account (issue #1055).
Changes to Integration Tests
- Michael Fyffe (@TraGicCode): Replace xStorage dsc resource module with StorageDsc (issue #1038).
Changes to Unit Tests
- Michael Fyffe (@TraGicCode): Updated the following resources unit test template to version 1.2.1
  - SqlAlias (issue #999).
  - SqlWindowsFirewall (issue #1089).

11.0.0.0

Changes to SqlServerDsc
- BREAKING CHANGE: Resource SqlRSSecureConnectionLevel was remove (issue #990). The parameter that was set using that resource has been merged into resource SqlRS as the parameter UseSsl. The UseSsl parameter is of type boolean. This change was made because from SQL Server 2008 R2 this value is made an on/off switch. Read more in the article ConfigurationSetting Method - SetSecureConnectionLevel.
- Updated so that named parameters are used for New-Object cmdlet. This was done to follow the style guideline.
- Updated manifest and license to reflect the new year (issue #965).
- Added a README.md under Tests\Integration to help contributors to write integration tests.
- Added 'Integration tests' section in the CONTRIBUTING.md.
- The complete examples were removed. They were no longer accurate and some referenced resources that no longer exist. Accurate examples can be found in each specific resource example folder. Examples for installing Failover Cluster can be found in the resource examples folders in the xFailOverCluster resource module (issue #462).
- A README.md was created under the Examples folder to be used as reference how to install certain scenarios (issue #462).
- Removed the local specific common test for compiling examples in this repository and instead opted-in for the common test in the 'DscResource.Tests' repository (issue #669).
- Added new resource SqlServerDatabaseMail for configuring SQL Server Database Mail (issue #155).
- Updated the helper function Test-SQLDscParameterState to handle the data type UInt16.
- Fixed typo in SqlServerDscCommon.Tests.
- Updated README.md with known issue section for each resource.
- Resources that did not have a description in the README.md now has one.
- Resources that missed links to the examples in the README.md now has those links.
- Style changes in all examples, removing type [System.Management.Automation.Credential()] from credential parameters (issue #1003), and renamed the credential parameter so it is not using abbreviation.
- Updated the security token for AppVeyor status badge in README.md. When we renamed the repository the security token was changed (issue #1012).
- Now the helper function Restart-SqlService, after restarting the SQL Server service, does not return until it can connect to the SQL Server instance, and the instance returns status 'Online' (issue #1008). If it fails to connect within the timeout period (defaults to 120 seconds) it throws an error.
- Fixed typo in comment-base help for helper function Test-AvailabilityReplicaSeedingModeAutomatic.
- Style cleanup in helper functions and tests.
Changes to SqlAG
- Fixed typos in tests.
- Style cleanup in code and tests.
Changes to SqlAGDatabase
- Style cleanup in code and tests.
Changes to SqlAGListener
- Fixed typo in comment-based help.
- Style cleanup in code and tests.
Changes to SqlAGReplica
- Minor code style cleanup. Removed unused variable and instead piped the cmdlet Join-SqlAvailabilityGroup to Out-Null.
- Fixed minor typos in comment-based help.
- Fixed minor typos in comment.
- Style cleanup in code and tests.
- Updated description for parameter Name in README.md and in comment-based help (issue #1034).
Changes to SqlAlias
- Fixed issue where exception was thrown if reg keys did not exist (issue #949).
- Style cleanup in tests.
Changes to SqlAlwaysOnService
- Refactor integration tests slightly to improve run time performance (issue #1001).
- Style cleanup in code and tests.
Changes to SqlDatabase
- Fix minor Script Analyzer warning.
Changes to SqlDatabaseDefaultLocation
- Refactor integration tests slightly to improve run time performance (issue #1001).
- Minor style cleanup of code in tests.
Changes to SqlDatabaseRole
- Style cleanup in tests.
Changes to SqlRS
- Replaced Get-WmiObject with Get-CimInstance to fix Script Analyzer warnings (issue #264).
- Refactored the resource to use Invoke-CimMethod.
- Added parameter UseSsl which when set to $true forces connections to the Reporting Services to use SSL when connecting (issue #990).
- Added complete example for SqlRS (based on the integration tests) (issue #634).
- Refactor integration tests slightly to improve run time performance (issue #1001).
- Style cleanup in code and tests.
Changes to SqlScript
- Style cleanup in tests.
- Updated examples.
- Added integration tests.
- Fixed minor typos in comment-based help.
- Added new example based on integration test.
Changes to SqlServerConfiguration
- Fixed minor typos in comment-based help.
- Now the verbose message say what option is changing and to what value (issue #1014).
- Changed the RestartTimeout parameter from type SInt32 to type UInt32.
- Added localization (issue #605).
- Style cleanup in code and tests.
Changes to SqlServerEndpoint
- Updated README.md with links to the examples (issue #504).
- Style cleanup in tests.
Changes to SqlServerLogin
- Added integration tests (issue #748).
- Minor code style cleanup.
- Removed unused variable and instead piped the helper function Connect-SQL to Out-Null.
- Style cleanup in tests.
Changes to SqlServerMaxDop
- Minor style changes in the helper function Get-SqlDscDynamicMaxDop.
Changes to SqlServerMemory
- Style cleanup in code and tests.
Changes to SqlServerPermission
- Fixed minor typos in comment-based help.
- Style cleanup in code.
Changes to SqlServerReplication
- Fixed minor typos in verbose messages.
- Style cleanup in tests.
Changes to SqlServerNetwork
- Added sysadmin account parameter usage to the examples.
Changes to SqlServerReplication
- Fix Script Analyzer warning (issue #263).
Changes to SqlServerRole
- Added localization (issue #621).
- Added integration tests (issue #756).
- Updated example to add two server roles in the same configuration.
- Style cleanup in tests.
Changes to SqlServiceAccount
- Default services are now properly detected (issue #930).
- Made the description of parameter RestartService more descriptive (issue #960).
- Added a read-only parameter ServiceAccountName so that the service account name is correctly returned as a string (issue #982).
- Added integration tests (issue #980).
- The timing issue that the resource returned before SQL Server service was actually restarted has been solved by a change in the helper function Restart-SqlService (issue #1008). Now Restart-SqlService waits for the instance to return status 'Online' or throws an error saying it failed to connect within the timeout period.
- Style cleanup in code and tests.
Changes to SqlSetup
- Added parameter ASServerMode to support installing Analysis Services in Multidimensional mode, Tabular mode and PowerPivot mode (issue #388).
- Added integration tests for testing Analysis Services Multidimensional mode and Tabular mode.
- Cleaned up integration tests.
- Added integration tests for installing a default instance of Database Engine.
- Refactor integration tests slightly to improve run time performance (issue #1001).
- Added PSSA rule 'PSUseDeclaredVarsMoreThanAssignments' override in the function Set-TargetResource for the variable $global:DSCMachineStatus.
- Style cleanup in code and tests.
Changes to SqlWaitForAG
- Style cleanup in code.
Changes to SqlWindowsFirewall
- Fixed minor typos in comment-based help.
- Style cleanup in code.

10.0.0.0

BREAKING CHANGE: Resource module has been renamed to SqlServerDsc (issue #916).
BREAKING CHANGE: Significant rename to reduce length of resource names
- See issue #851 for a complete table mapping rename changes.
- Impact to all resources.
Changes to CONTRIBUTING.md
- Added details to the naming convention used in SqlServerDsc.
Changes to SqlServerDsc
- The examples in the root of the Examples folder are obsolete. A note was added to the comment-based help in each example stating it is obsolete. This is a temporary measure until they are replaced (issue #904).
- Added new common test (regression test) for validating the long path issue for compiling resources in Azure Automation.
- Fix resources in alphabetical order in README.md (issue #908).
Changes to SqlAG
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
- BREAKING CHANGE: The read-only property SQLServerNetName was removed in favor of EndpointHostName (issue #924). Get-TargetResource will now return the value of property NetName for the property EndpointHostName.
Changes to SqlAGDatabase
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
- Changed the Get-MatchingDatabaseNames function to be case insensitive when matching database names (issue #912).
Changes to SqlAGListener
- BREAKING CHANGE: Parameter NodeName has been renamed to ServerName (issue #308).
Changes to SqlAGReplica
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
- BREAKING CHANGE: Parameters PrimaryReplicaSQLServer and PrimaryReplicaSQLInstanceName has been renamed to PrimaryReplicaServerName and PrimaryReplicaInstanceName respectively (issue #922).
- BREAKING CHANGE: The read-only property SQLServerNetName was removed in favor of EndpointHostName (issue #924). Get-TargetResource will now return the value of property NetName for the property EndpointHostName.
Changes to SqlAlwaysOnService
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlDatabase
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes SqlDatabaseDefaultLocation
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlDatabaseOwner
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlDatabasePermission
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlDatabaseRecoveryModel
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlDatabaseRole
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlRS
- BREAKING CHANGE: Parameters RSSQLServer and RSSQLInstanceName has been renamed to DatabaseServerName and DatabaseInstanceName respectively (issue #923).
Changes to SqlServerConfiguration
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlServerEndpoint
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlServerEndpointPermission
- BREAKING CHANGE: Parameter NodeName has been renamed to ServerName (issue #308).
- Now the examples files have a shorter name so that resources will not fail to compile in Azure Automation (issue #934).
Changes to SqlServerEndpointState
- BREAKING CHANGE: Parameter NodeName has been renamed to ServerName (issue #308).
Changes to SqlServerLogin
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlServerMaxDop
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlServerMemory
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlServerNetwork
- BREAKING CHANGE: Parameters SQLServer has been renamed to ServerName (issue #308).
Changes to SqlServerPermission
- BREAKING CHANGE: Parameter NodeName has been renamed to ServerName (issue #308).
Changes to SqlServerRole
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).
Changes to SqlServerServiceAccount
- BREAKING CHANGE: Parameters SQLServer and SQLInstanceName has been renamed to ServerName and InstanceName respectively (issue #308).

9.0.0.0

Changes to xSQLServer
- Updated Pester syntax to v4
- Fixes broken links to issues in the CHANGELOG.md.
Changes to xSQLServerDatabase
- Added parameter to specify collation for a database to be different from server collation (issue #767).
- Fixed unit tests for Get-TargetResource to ensure correctly testing return values (issue #849)
Changes to xSQLServerAlwaysOnAvailabilityGroup
- Refactored the unit tests to allow them to be more user friendly and to test additional SQLServer variations.
  - Each test will utilize the Import-SQLModuleStub to ensure the correct module is loaded (issue #784).
- Fixed an issue when setting the SQLServer parameter to a Fully Qualified Domain Name (FQDN) (issue #468).
- Fixed the logic so that if a parameter is not supplied to the resource, the resource will not attempt to apply the defaults on subsequent checks (issue #517).
- Made the resource cluster aware. When ProcessOnlyOnActiveNode is specified, the resource will only determine if a change is needed if the target node is the active host of the SQL Server instance (issue #868).
Changes to xSQLServerAlwaysOnAvailabilityGroupDatabaseMembership
- Made the resource cluster aware. When ProcessOnlyOnActiveNode is specified, the resource will only determine if a change is needed if the target node is the active host of the SQL Server instance (issue #869).
Changes to xSQLServerAlwaysOnAvailabilityGroupReplica
- Made the resource cluster aware. When ProcessOnlyOnActiveNode is specified, the resource will only determine if a change is needed if the target node is the active host of the SQL Server instance (issue #870).
Added the CommonTestHelper.psm1 to store common testing functions.
- Added the Import-SQLModuleStub function to ensure the correct version of the module stubs are loaded (issue #784).
Changes to xSQLServerMemory
- Made the resource cluster aware. When ProcessOnlyOnActiveNode is specified, the resource will only determine if a change is needed if the target node is the active host of the SQL Server instance (issue #867).
Changes to xSQLServerNetwork
- BREAKING CHANGE: Renamed parameter TcpDynamicPorts to TcpDynamicPort and changed type to Boolean (issue #534).
- Resolved issue when switching from dynamic to static port. configuration (issue #534).
- Added localization (en-US) for all strings in resource and unit tests (issue #618).
- Updated examples to reflect new parameters.
Changes to xSQLServerRSConfig
- Added examples
Added resource
- xSQLServerDatabaseDefaultLocation (issue #656)
Changes to xSQLServerEndpointPermission
- Fixed a problem when running the tests locally in a PowerShell console it would ask for parameters (issue #897).
Changes to xSQLServerAvailabilityGroupListener
- Fixed a problem when running the tests locally in a PowerShell console it would ask for parameters (issue #897).
Changes to xSQLServerMaxDop
- Made the resource cluster aware. When ProcessOnlyOnActiveNode is specified, the resource will only determine if a change is needed if the target node is the active host of the SQL Server instance (issue #882).

8.2.0.0

Changes to xSQLServer
- Updated appveyor.yml so that integration tests run in order and so that the SQLPS module folders are renamed to not disturb the units test, but can be renamed back by the integration tests xSQLServerSetup so that the integration tests can run successfully (issue #774).
- Changed so the maximum version to be installed is 4.0.6.0, when running unit tests in AppVeyor. Quick fix until we can resolve the unit tests (see issue #807).
- Moved the code block, that contains workarounds in appveyor.yml, so it is run during the install phase instead of the test phase.
- Fix problem with tests breaking with Pester 4.0.7 (issue #807).
Changes to xSQLServerHelper
- Changes to Connect-SQL and Import-SQLPSModule
  - Now it correctly loads the correct assemblies when SqlServer module is present (issue #649).
  - Now SQLPS module will be correctly loaded (discovered) after installation of SQL Server. Previously resources depending on SQLPS module could fail because SQLPS was not found after installation because the PSModulePath environment variable in the (LCM) PowerShell session did not contain the new module path.
- Added new helper function "Test-ClusterPermissions" (issue #446).
Changes to xSQLServerSetup
- Fixed an issue with trailing slashes in the 'UpdateSource' property (issue #720).
- Fixed so that the integration test renames back the SQLPS module folders if they was renamed by AppVeyor (in the appveyor.yml file) (issue #774).
- Fixed so integration test does not write warnings when SQLPS module is loaded (issue #798).
- Changes to integration tests.
  - Moved the configuration block from the MSFT_xSQLServerSetup.Integration.Tests.ps1 to the MSFT_xSQLServerSetup.config.ps1 to align with the other integration test. And also get most of the configuration in one place.
  - Changed the tests so that the local SqlInstall account is added as a member of the local administrators group.
  - Changed the tests so that the local SqlInstall account is added as a member of the system administrators in SQL Server (Database Engine) - needed for the xSQLServerAlwaysOnService integration tests.
  - Changed so that only one of the Modules-folder for the SQLPS PowerShell module for SQL Server 2016 is renamed back so it can be used with the integration tests. There was an issue when more than one SQLPS module was present (see more information in issue #806).
  - Fixed wrong variable name for SQL service credential. It was using the integration test variable name instead of the parameter name.
  - Added ErrorAction 'Stop' to the cmdlet Start-DscConfiguration (issue #824).
Changes to xSQLServerAlwaysOnAvailabilityGroup
- Change the check of the values entered as parameter for BasicAvailabilityGroup. It is a boolean, hence it was not possible to disable the feature.
- Add possibility to enable/disable the feature DatabaseHealthTrigger (SQL Server 2016 or later only).
- Add possibility to enable the feature DtcSupportEnabled (SQL Server 2016 or later only). The feature currently can't be altered once the Availability Group is created.
- Use the new helper function "Test-ClusterPermissions".
- Refactored the unit tests to allow them to be more user friendly.
- Added the following read-only properties to the schema (issue #476)
  - EndpointPort
  - EndpointURL
  - SQLServerNetName
  - Version
- Use the Get-PrimaryReplicaServerObject helper function.
Changes to xSQLServerAlwaysOnAvailabilityGroupReplica
- Fixed the formatting for the AvailabilityGroupNotFound error.
- Added the following read-only properties to the schema (issue #477)
  - EndpointPort
  - EndpointURL
- Use the new helper function "Test-ClusterPermissions".
- Use the Get-PrimaryReplicaServerObject helper function
Changes to xSQLServerHelper
- Fixed Connect-SQL by ensuring the Status property returns 'Online' prior to returning the SQL Server object (issue #333).
Changes to xSQLServerRole
- Running Get-DscConfiguration no longer throws an error saying property Members is not an array (issue #790).
Changes to xSQLServerMaxDop
- Fixed error where Measure-Object cmdlet would fail claiming it could not find the specified property (issue #801)
Changes to xSQLServerAlwaysOnService
- Added integration test (issue #736).
  - Added ErrorAction 'Stop' to the cmdlet Start-DscConfiguration (issue #824).
Changes to SMO.cs
- Added default properties to the Server class
  - AvailabilityGroups
  - Databases
  - EndpointCollection
- Added a new overload to the Login class
- Added default properties to the AvailabilityReplicas class
  - AvailabilityDatabases
  - AvailabilityReplicas
Added new resource xSQLServerAccount (issue #706)
- Added localization support for all strings
- Added examples for usage
Changes to xSQLServerRSConfig
- No longer returns a null value from Test-TargetResource when Reporting Services has not been initialized (issue #822).
- Fixed so that when two Reporting Services are installed for the same major version the resource does not throw an error (issue #819).
- Now the resource will restart the Reporting Services service after initializing (issue #592). This will enable the Reports site to work.
- Added integration test (issue #753).
- Added support for configuring URL reservations and virtual directory names (issue #570)
Added resource
- xSQLServerDatabaseDefaultLocation (issue #656)

8.1.0.0

Changes to xSQLServer
- Added back .markdownlint.json so that lint rule MD013 is enforced.
- Change the module to use the image 'Visual Studio 2017' as the build worker image for AppVeyor (issue #685).
- Minor style change in CommonResourceHelper. Added missing [Parameter()] on three parameters.
- Minor style changes to the unit tests for CommonResourceHelper.
- Changes to xSQLServerHelper
  - Added Swedish localization (issue #695).
- Opt-in for module files common tests (issue #702).
  - Removed Byte Order Mark (BOM) from the files; CommonResourceHelper.psm1, MSFT_xSQLServerAvailabilityGroupListener.psm1, MSFT_xSQLServerConfiguration.psm1, MSFT_xSQLServerEndpointPermission.psm1, MSFT_xSQLServerEndpointState.psm1, MSFT_xSQLServerNetwork.psm1, MSFT_xSQLServerPermission.psm1, MSFT_xSQLServerReplication.psm1, MSFT_xSQLServerScript.psm1, SQLPSStub.psm1, SQLServerStub.psm1.
- Opt-in for script files common tests (issue #707).
  - Removed Byte Order Mark (BOM) from the files; DSCClusterSqlBuild.ps1, DSCFCISqlBuild.ps1, DSCSqlBuild.ps1, DSCSQLBuildEncrypted.ps1, SQLPush_SingleServer.ps1, 1-AddAvailabilityGroupListenerWithSameNameAsVCO.ps1, 2-AddAvailabilityGroupListenerWithDifferentNameAsVCO.ps1, 3-RemoveAvailabilityGroupListenerWithSameNameAsVCO.ps1, 4-RemoveAvailabilityGroupListenerWithDifferentNameAsVCO.ps1, 5-AddAvailabilityGroupListenerUsingDHCPWithDefaultServerSubnet.ps1, 6-AddAvailabilityGroupListenerUsingDHCPWithSpecificSubnet.ps1, 2-ConfigureInstanceToEnablePriorityBoost.ps1, 1-CreateEndpointWithDefaultValues.ps1, 2-CreateEndpointWithSpecificPortAndIPAddress.ps1, 3-RemoveEndpoint.ps1, 1-AddConnectPermission.ps1, 2-RemoveConnectPermission.ps1, 3-AddConnectPermissionToAlwaysOnPrimaryAndSecondaryReplicaEachWithDifferentSqlServiceAccounts.ps1, 4-RemoveConnectPermissionToAlwaysOnPrimaryAndSecondaryReplicaEachWithDifferentSqlServiceAccounts.ps1, 1-MakeSureEndpointIsStarted.ps1, 2-MakeSureEndpointIsStopped.ps1, 1-EnableTcpIpWithStaticPort.ps1, 2-EnableTcpIpWithDynamicPort.ps1, 1-AddServerPermissionForLogin.ps1, 2-RemoveServerPermissionForLogin.ps1, 1-ConfigureInstanceAsDistributor.ps1, 2-ConfigureInstanceAsPublisher.ps1, 1-WaitForASingleClusterGroup.ps1, 2-WaitForMultipleClusterGroups.ps1.
- Updated year to 2017 in license file (issue #711).
- Code style clean-up throughout the module to align against the Style Guideline.
- Fixed typos and the use of wrong parameters in unit tests which was found after release of new version of Pester (issue #773).
Changes to xSQLServerAlwaysOnService
- Added resource description in README.md.
- Updated parameters descriptions in comment-based help, schema.mof and README.md.
- Changed the datatype of the parameter to UInt32 so the same datatype is used in both the Get-/Test-/Set-TargetResource functions as in the schema.mof (issue #688).
- Added read-only property IsHadrEnabled to schema.mof and the README.md (issue #687).
- Minor cleanup of code.
- Added examples (issue #633)
  - 1-EnableAlwaysOn.ps1
  - 2-DisableAlwaysOn.ps1
- Fixed PS Script Analyzer errors (issue #724)
- Casting the result of the property IsHadrEnabled to [System.Boolean] so that $null is never returned, which resulted in an exception (issue #763).
Changes to xSQLServerDatabasePermission
- Fixed PS Script Analyzer errors (issue #725)
Changes to xSQLServerScript
- Fixed PS Script Analyzer errors (issue #728)
Changes to xSQLServerSetup
- Added Swedish localization (issue #695).
- Now Get-TargetResource correctly returns an array for property ASSysAdminAccounts, and no longer throws an error when there is just one Analysis Services administrator (issue #691).
- Added a simple integration test (issue #709).
- Fixed PS Script Analyzer errors (issue #729)

8.0.0.0

BREAKING CHANGE: The module now requires WMF 5.
- This is required for class-based resources
Added new resource
- xSQLServerAlwaysOnAvailabilityGroupDatabaseMembership
- Added localization support for all strings.
- Refactored as a MOF based resource due to challenges with Pester and testing in Powershell 5.
Changes to xSQLServer
- BREAKING CHANGE: xSQLServer does no longer try to support WMF 4.0 (PowerShell 4.0) (issue #574). Minimum supported version of WMF is now 5.0 (PowerShell 5.0).
- BREAKING CHANGE: Removed deprecated resource xSQLAOGroupJoin (issue #457).
- BREAKING CHANGE: Removed deprecated resource xSQLAOGroupEnsure (issue #456).
- BREAKING CHANGE: Removed deprecated resource xSQLServerFailoverClusterSetup (issue #336).
- Updated PULL_REQUEST_TEMPLATE adding comment block around text. Also rearranged and updated texts (issue #572).
- Added common helper functions for HQRM localization, and added tests for the helper functions.
  - Get-LocalizedData
  - New-InvalidResultException
  - New-ObjectNotFoundException
  - New-InvalidOperationException
  - New-InvalidArgumentException
- Updated CONTRIBUTING.md describing the new localization helper functions.
- Fixed typos in xSQLServer.strings.psd1
- Fixed CodeCov badge links in README.md so that they point to the correct branch.
- Added VS Code workspace settings file with formatting settings matching the Style Guideline (issue #645). That will make it possible inside VS Code to press SHIFT+ALT+F, or press F1 and choose 'Format document' in the list. The PowerShell code will then be formatted according to the Style Guideline (although maybe not complete, but would help a long way).
  - Removed powershell.codeFormatting.alignPropertyValuePairs setting since it does not align with the style guideline.
  - Added powershell.codeFormatting.preset with a value of 'Custom' so that workspace formatting settings are honored (issue #665).
- Fixed lint error MD013 and MD036 in README.md.
- Updated .markdownlint.json to enable rule MD013 and MD036 to enforce those lint markdown rules in the common tests.
- Fixed lint error MD013 in CHANGELOG.md.
- Fixed lint error MD013 in CONTRIBUTING.md.
- Added code block around types in README.md.
- Updated copyright information in xSQLServer.psd1.
- Opt-in for markdown common tests (issue #668).
  - The old markdown tests has been removed.
Changes to xSQLServerHelper
- Removed helper function Grant-ServerPerms because the deprecated resource that was using it was removed.
- Removed helper function Grant-CNOPerms because the deprecated resource that was using it was removed.
- Removed helper function New-ListenerADObject because the deprecated resource that was using it was removed.
- Added tests for those helper functions that did not have tests.
- Test-SQLDscParameterState helper function can now correctly pass a CimInstance as DesiredValue.
- Test-SQLDscParameterState helper function will now output a warning message if the value type of a desired value is not supported.
- Added localization to helper functions (issue #641).
  - Resolved the issue when using Write-Verbose in helper functions discussed in #641 where Write-Verbose wouldn't write out verbose messages unless using parameter Verbose.
  - Moved localization strings from xSQLServer.strings.psd1 to xSQLServerHelper.strings.psd1.
Changes to xSQLServerSetup
- BREAKING CHANGE: Replaced StartWin32Process helper function with the cmdlet Start-Process (issue #41, #93 and #126).
- BREAKING CHANGE: The parameter SetupCredential has been removed since it is no longer needed. This is because the resource now support the built-in PsDscRunAsCredential.
- BREAKING CHANGE: Now the resource supports using built-in PsDscRunAsCredential. If PsDscRunAsCredential is set, that username will be used as the first system administrator.
- BREAKING CHANGE: If the parameter PsDscRunAsCredential are not assigned any credentials then the resource will start the setup process as the SYSTEM account. When installing as the SYSTEM account, then parameter SQLSysAdminAccounts and ASSysAdminAccounts must be specified when installing feature Database Engine and Analysis Services respectively.
- When setup exits with the exit code 3010 a warning message is written to console telling that setup finished successfully, but a reboot is required (partly fixes issue #565).
- When setup exits with an exit code other than 0 or 3010 a warning message is written to console telling that setup finished with an error (partly fixes issue #580).
- Added a new parameter SetupProcessTimeout which defaults to 7200 seconds (2 hours). If the setup process has not finished before the timeout value in SetupProcessTimeout an error will be thrown (issue #566).
- Updated all examples to match the removal of SetupCredential.
- Updated (removed) severe known issues in README.md for resource xSQLServerSetup.
- Now all major version uses the same identifier to evaluate InstallSharedDir and InstallSharedWOWDir (issue #420).
- Now setup arguments that contain no value will be ignored, for example when InstallSharedDir and InstallSharedWOWDir path is already present on the target node, because of a previous installation (issue #639).
- Updated Get-TargetResource to correctly detect BOL, Conn, BC and other tools when they are installed without SQLENGINE (issue #591).
- Now it can detect Documentation Components correctly after the change in issue #591 (issue #628)
- Fixed bug that prevented Get-DscConfiguration from running without error. The return hash table fails if the $clusteredSqlIpAddress variable is not used. The schema expects a string array but it is initialized as just a null string, causing it to fail on Get-DscConfiguration (issue #393).
- Added localization support for all strings.
- Added a test to test some error handling for cluster installations.
- Added support for MDS feature install (issue #486)
  - Fixed localization support for MDS feature (issue #671).
Changes to xSQLServerRSConfig
- BREAKING CHANGE: Removed $SQLAdminCredential parameter. Use common parameter PsDscRunAsCredential (WMF 5.0+) to run the resource under different credentials. PsDscRunAsCredential Windows account must be a sysadmin on SQL Server (issue #568).
- In addition, the resource no longer uses Invoke-Command cmdlet that was used to impersonate the Windows user specified by $SQLAdminCredential. The call also needed CredSSP authentication to be enabled and configured on the target node, which complicated deployments in non-domain scenarios. Using PsDscRunAsCredential solves this problems for us.
- Fixed virtual directory creation for SQL Server 2016 (issue #569).
- Added unit tests (issue #295).
Changes to xSQLServerDatabase
- Changed the readme, SQLInstance should have been SQLInstanceName.
Changes to xSQLServerScript
- Fixed bug with schema and variable mismatch for the Credential/Username parameter in the return statement (issue #661).
- Optional QueryTimeout parameter to specify sql script query execution timeout. Fixes issue #597
Changes to xSQLServerAlwaysOnService
- Fixed typos in localization strings and in tests.
Changes to xSQLServerAlwaysOnAvailabilityGroup
- Now it utilize the value of 'FailoverMode' to set the 'FailoverMode' property of the Availability Group instead of wrongly using the 'AvailabilityMode' property of the Availability Group.

7.1.0.0

Changes to xSQLServerMemory
- Changed the way SQLServer parameter is passed from Test-TargetResource to Get-TargetResource so that the default value isn't lost (issue #576).
- Added condition to unit tests for when no SQLServer parameter is set.
Changes to xSQLServerMaxDop
- Changed the way SQLServer parameter is passed from Test-TargetResource to Get-TargetResource so that the default value isn't lost (issue #576).
- Added condition to unit tests for when no SQLServer parameter is set.
Changes to xWaitForAvailabilityGroup
- Updated README.md with a description for the resources and revised the parameter descriptions.
- The default value for RetryIntervalSec is now 20 seconds and the default value for RetryCount is now 30 times (issue #505).
- Cleaned up code and fixed PSSA rules warnings (issue #268).
- Added unit tests (issue #297).
- Added descriptive text to README.md that the account that runs the resource must have permission to run the cmdlet Get-ClusterGroup (issue #307).
- Added read-only parameter GroupExist which will return $true if the cluster role/group exist, otherwise it returns $false (issue #510).
- Added examples.
Changes to xSQLServerPermission
- Cleaned up code, removed SupportsShouldProcess and fixed PSSA rules warnings (issue #241 and issue #262).
- It is now possible to add permissions to two or more logins on the same instance (issue #526).
- The parameter NodeName is no longer mandatory and has now the default value of $env:COMPUTERNAME.
- The parameter Ensure now has a default value of 'Present'.
- Updated README.md with a description for the resources and revised the parameter descriptions.
- Removed dependency of SQLPS provider (issue #482).
- Added ConnectSql permission. Now that permission can also be granted or revoked.
- Updated note in resource description to also mention ConnectSql permission.
Changes to xSQLServerHelper module
- Removed helper function Get-SQLPSInstance and Get-SQLPSInstanceName because there is no resource using it any longer.
- Added four new helper functions.
  - Register-SqlSmo, Register-SqlWmiManagement and Unregister-SqlAssemblies to handle the creation on the application domain and loading and unloading of the SMO and SqlWmiManagement assemblies.
  - Get-SqlInstanceMajorVersion to get the major SQL version for a specific instance.
- Fixed typos in comment-based help
Changes to xSQLServer
- Fixed typos in markdown files; CHANGELOG, CONTRIBUTING, README and ISSUE_TEMPLATE.
- Fixed typos in schema.mof files (and README.md).
- Updated some parameter description in schema.mof files on those that was found was not equal to README.md.
Changes to xSQLServerAlwaysOnService
- Get-TargetResource should no longer fail silently with error 'Index operation failed; the array index evaluated to null.' (issue #519). Now if the Server.IsHadrEnabled property return neither $true or $false the Get-TargetResource function will throw an error.
Changes to xSQLServerSetUp
- Updated xSQLServerSetup Module Get-Resource method to fix (issue #516 and #490).
- Added change to detect DQ, DQC, BOL, SDK features. Now the function Test-TargetResource returns true after calling set for DQ, DQC, BOL, SDK features (issue #516 and #490).
Changes to xSQLServerAlwaysOnAvailabilityGroup
- Updated to return the exception raised when an error is thrown.
Changes to xSQLServerAlwaysOnAvailabilityGroupReplica
- Updated to return the exception raised when an error is thrown.
- Updated parameter description for parameter Name, so that it says it must be in the format SQLServer\InstanceName for named instance (issue #548).
Changes to xSQLServerLogin
- Added an optional boolean parameter Disabled. It can be used to enable/disable existing logins or create disabled logins (new logins are created as enabled by default).
Changes to xSQLServerDatabaseRole
- Updated variable passed to Microsoft.SqlServer.Management.Smo.User constructor to fix issue #530
Changes to xSQLServerNetwork
- Added optional parameter SQLServer with default value of $env:COMPUTERNAME (issue #528).
- Added optional parameter RestartTimeout with default value of 120 seconds.
- Now the resource supports restarting a sql server in a cluster (issue #527 and issue #455).
- Now the resource allows to set the parameter TcpDynamicPorts to a blank value (partly fixes issue #534). Setting a blank value for parameter TcpDynamicPorts together with a value for parameter TcpPort means that static port will be used.
- Now the resource will not call Alter() in the Set-TargetResource when there is no change necessary (issue #537).
- Updated example 1-EnableTcpIpOnCustomStaticPort.
- Added unit tests (issue #294).
- Refactored some of the code, cleaned up the rest and fixed PSSA rules warnings (issue #261).
- If parameter TcpDynamicPort is set to '0' at the same time as TcpPort is set the resource will now throw an error (issue #535).
- Added examples (issue #536).
- When TcpDynamicPorts is set to '0' the Test-TargetResource function will no longer fail each time (issue #564).
Changes to xSQLServerRSConfig
- Replaced sqlcmd.exe usages with Invoke-Sqlcmd calls (issue #567).
Changes to xSQLServerDatabasePermission
- Fixed code style, updated README.md and removed *-SqlDatabasePermission functions from xSQLServerHelper.psm1.
- Added the option 'GrantWithGrant' with gives the user grant rights, together with the ability to grant others the same right.
- Now the resource can revoke permission correctly (issue #454). When revoking 'GrantWithGrant', both the grantee and all the other users the grantee has granted the same permission to, will also get their permission revoked.
- Updated tests to cover Revoke().
Changes to xSQLServerHelper
- The missing helper function ('Test-SPDSCObjectHasProperty'), that was referenced in the helper function Test-SQLDscParameterState, is now incorporated into Test-SQLDscParameterState (issue #589).

7.0.0.0

Examples
- xSQLServerDatabaseRole
  - 1-AddDatabaseRole.ps1
  - 2-RemoveDatabaseRole.ps1
- xSQLServerRole
  - 3-AddMembersToServerRole.ps1
  - 4-MembersToIncludeInServerRole.ps1
  - 5-MembersToExcludeInServerRole.ps1
- xSQLServerSetup
  - 1-InstallDefaultInstanceSingleServer.ps1
  - 2-InstallNamedInstanceSingleServer.ps1
  - 3-InstallNamedInstanceSingleServerFromUncPathUsingSourceCredential.ps1
  - 4-InstallNamedInstanceInFailoverClusterFirstNode.ps1
  - 5-InstallNamedInstanceInFailoverClusterSecondNode.ps1
- xSQLServerReplication
  - 1-ConfigureInstanceAsDistributor.ps1
  - 2-ConfigureInstanceAsPublisher.ps1
- xSQLServerNetwork
  - 1-EnableTcpIpOnCustomStaticPort.ps1
- xSQLServerAvailabilityGroupListener
  - 1-AddAvailabilityGroupListenerWithSameNameAsVCO.ps1
  - 2-AddAvailabilityGroupListenerWithDifferentNameAsVCO.ps1
  - 3-RemoveAvailabilityGroupListenerWithSameNameAsVCO.ps1
  - 4-RemoveAvailabilityGroupListenerWithDifferentNameAsVCO.ps1
  - 5-AddAvailabilityGroupListenerUsingDHCPWithDefaultServerSubnet.ps1
  - 6-AddAvailabilityGroupListenerUsingDHCPWithSpecificSubnet.ps1
- xSQLServerEndpointPermission
  - 1-AddConnectPermission.ps1
  - 2-RemoveConnectPermission.ps1
  - 3-AddConnectPermissionToAlwaysOnPrimaryAndSecondaryReplicaEachWithDifferentSqlServiceAccounts.ps1
  - 4-RemoveConnectPermissionToAlwaysOnPrimaryAndSecondaryReplicaEachWithDifferentSqlServiceAccounts.ps1
- xSQLServerPermission
  - 1-AddServerPermissionForLogin.ps1
  - 2-RemoveServerPermissionForLogin.ps1
- xSQLServerEndpointState
  - 1-MakeSureEndpointIsStarted.ps1
  - 2-MakeSureEndpointIsStopped.ps1
- xSQLServerConfiguration
  - 1-ConfigureTwoInstancesOnTheSameServerToEnableClr.ps1
  - 2-ConfigureInstanceToEnablePriorityBoost.ps1
- xSQLServerEndpoint
  - 1-CreateEndpointWithDefaultValues.ps1
  - 2-CreateEndpointWithSpecificPortAndIPAddress.ps1
  - 3-RemoveEndpoint.ps1
Changes to xSQLServerDatabaseRole
- Fixed code style, added updated parameter descriptions to schema.mof and README.md.
Changes to xSQLServer
- Raised the CodeCov target to 70% which is the minimum and required target for HQRM resource.
Changes to xSQLServerRole
- BREAKING CHANGE: The resource has been reworked in it's entirely. Below is what has changed.
  - The mandatory parameters now also include ServerRoleName.
  - The ServerRole parameter was before an array of server roles, now this parameter is renamed to ServerRoleName and can only be set to one server role.
    - ServerRoleName are no longer limited to built-in server roles. To add members to a built-in server role, set ServerRoleName to the name of the built-in server role.
    - The ServerRoleName will be created when Ensure is set to 'Present' (if it does not already exist), or removed if Ensure is set to 'Absent'.
  - Three new parameters are added; Members, MembersToInclude and MembersToExclude.
    - Members can be set to one or more logins, and those will replace all the memberships in the server role.
    - MembersToInclude and MembersToExclude can be set to one or more logins that will add or remove memberships, respectively, in the server role. MembersToInclude and MembersToExclude can not be used at the same time as parameter Members. But both MembersToInclude and MembersToExclude can be used together at the same time.
Changes to xSQLServerSetup
- Added a note to the README.md saying that it is not possible to add or remove features from a SQL Server failover cluster (issue #433).
- Changed so that it reports false if the desired state is not correct (issue #432).
  - Added a test to make sure we always return false if a SQL Server failover cluster is missing features.
- Helper function Connect-SQLAnalysis
  - Now has correct error handling, and throw does not used the unknown named parameter '-Message' (issue #436)
  - Added tests for Connect-SQLAnalysis
  - Changed to localized error messages.
  - Minor changes to error handling.
- This adds better support for Addnode (issue #369).
- Now it skips cluster validation för add node (issue #442).
- Now it ignores parameters that are not allowed for action Addnode (issue #441).
- Added support for vNext CTP 1.4 (issue #472).
Added new resource
- xSQLServerAlwaysOnAvailabilityGroupReplica
Changes to xSQLServerDatabaseRecoveryModel
- Fixed code style, removed SQLServerDatabaseRecoveryModel functions from xSQLServerHelper.
Changes to xSQLServerAlwaysOnAvailabilityGroup
- Fixed the permissions check loop so that it exits the loop after the function determines the required permissions are in place.
Changes to xSQLServerAvailabilityGroupListener
- Removed the dependency of SQLPS provider (issue #460).
- Cleaned up code.
- Added test for more coverage.
- Fixed PSSA rule warnings (issue #255).
- Parameter Ensure now defaults to 'Present' (issue #450).
Changes to xSQLServerFirewall
- Now it will correctly create rules when the resource is used for two or more instances on the same server (issue #461).
Changes to xSQLServerEndpointPermission
- Added description to the README.md
- Cleaned up code (issue #257 and issue #231)
- Now the default value for Ensure is 'Present'.
- Removed dependency of SQLPS provider (issue #483).
- Refactored tests so they use less code.
Changes to README.md
- Adding deprecated tag to xSQLServerFailoverClusterSetup, xSQLAOGroupEnsure and xSQLAOGroupJoin in README.md so it it more clear that these resources has been replaced by xSQLServerSetup, xSQLServerAlwaysOnAvailabilityGroup and xSQLServerAlwaysOnAvailabilityGroupReplica respectively.
Changes to xSQLServerEndpoint
- BREAKING CHANGE: Now SQLInstanceName is mandatory, and is a key, so SQLInstanceName has no longer a default value (issue #279).
- BREAKING CHANGE: Parameter AuthorizedUser has been removed (issue #466, issue #275 and issue #80). Connect permissions can be set using the resource xSQLServerEndpointPermission.
- Optional parameter IpAddress has been added. Default is to listen on any valid IP-address. (issue #232)
- Parameter Port now has a default value of 5022.
- Parameter Ensure now defaults to 'Present'.
- Resource now supports changing IP address and changing port.
- Added unit tests (issue #289)
- Added examples.
Changes to xSQLServerEndpointState
- Cleaned up code, removed SupportsShouldProcess and fixed PSSA rules warnings (issue #258 and issue #230).
- Now the default value for the parameter State is 'Started'.
- Updated README.md with a description for the resources and revised the parameter descriptions.
- Removed dependency of SQLPS provider (issue #481).
- The parameter NodeName is no longer mandatory and has now the default value of $env:COMPUTERNAME.
- The parameter Name is now a key so it is now possible to change the state on more than one endpoint on the same instance. Note: The resource still only supports Database Mirror endpoints at this time.
Changes to xSQLServerHelper module
- Removing helper function Get-SQLAlwaysOnEndpoint because there is no resource using it any longer.
- BREAKING CHANGE: Changed helper function Import-SQLPSModule to support SqlServer module (issue #91). The SqlServer module is the preferred module so if it is found it will be used, and if not found an attempt will be done to load SQLPS module instead.
Changes to xSQLServerScript
- Updated tests for this resource, because they failed when Import-SQLPSModule was updated.

6.0.0.0

Changes to xSQLServerConfiguration
- BREAKING CHANGE: The parameter SQLInstanceName is now mandatory.
- Resource can now be used to define the configuration of two or more different DB instances on the same server.
Changes to xSQLServerRole
- xSQLServerRole now correctly reports that the desired state is present when the login is already a member of the server roles.
Added new resources
- xSQLServerAlwaysOnAvailabilityGroup
Changes to xSQLServerSetup
- Properly checks for use of SQLSysAdminAccounts parameter in $PSBoundParameters. The test now also properly evaluates the setup argument for SQLSysAdminAccounts.
- xSQLServerSetup should now function correctly for the InstallFailoverCluster action, and also supports cluster shared volumes. Note that the AddNode action is not currently working.
- It now detects that feature Client Connectivity Tools (CONN) and Client Connectivity Backwards Compatibility Tools (BC) is installed.
- Now it can correctly determine the right cluster when only parameter InstallSQLDataDir is assigned a path (issue #401).
- Now the only mandatory path parameter is InstallSQLDataDir when installing Database Engine (issue #400).
- It now can handle mandatory parameters, and are not using wildcard to find the variables containing paths (issue #394).
- Changed so that instead of connection to localhost it is using $env:COMPUTERNAME as the host name to which it connects. And for cluster installation it uses the parameter FailoverClusterNetworkName as the host name to which it connects (issue #407).
- When called with Action = 'PrepareFailoverCluster', the SQLSysAdminAccounts and FailoverClusterGroup parameters are no longer passed to the setup process (issues #410 and 411).
- Solved the problem that InstanceDir and InstallSQLDataDir could not be set to just a qualifier, i.e 'E:' (issue #418). All paths (except SourcePath) can now be set to just the qualifier.
Enables CodeCov.io code coverage reporting.
Added badge for CodeCov.io to README.md.
Examples
- xSQLServerMaxDop
  - 1-SetMaxDopToOne.ps1
  - 2-SetMaxDopToAuto.ps1
  - 3-SetMaxDopToDefault.ps1
- xSQLServerMemory
  - 1-SetMaxMemoryTo12GB.ps1
  - 2-SetMaxMemoryToAuto.ps1
  - 3-SetMinMaxMemoryToAuto.ps1
  - 4-SetMaxMemoryToDefault.ps1
- xSQLServerDatabase
  - 1-CreateDatabase.ps1
  - 2-DeleteDatabase.ps1
Added tests for resources
- xSQLServerMaxDop
- xSQLServerMemory
Changes to xSQLServerMemory
- BREAKING CHANGE: The mandatory parameter now include SQLInstanceName. The DynamicAlloc parameter is no longer mandatory
Changes to xSQLServerDatabase
- When the system is not in desired state the Test-TargetResource will now output verbose messages saying so.
Changes to xSQLServerDatabaseOwner
- Fixed code style, added updated parameter descriptions to schema.mof and README.md.

5.0.0.0

Improvements how tests are initiated in AppVeyor
- Removed previous workaround (issue #201) from unit tests.
- Changes in appveyor.yml so that SQL modules are removed before common test is run.
- Now the deploy step are no longer failing when merging code into Dev. Neither is the deploy step failing if a contributor had AppVeyor connected to the fork of xSQLServer and pushing code to the fork.
Changes to README.md
- Changed the contributing section to help new contributors.
- Added links for each resource so it is easier to navigate to the parameter list for each resource.
- Moved the list of resources in alphabetical order.
- Moved each resource parameter list into alphabetical order.
- Removed old text mentioning System Center.
- Now the correct product name is written in the installation section, and a typo was also fixed.
- Fixed a typo in the Requirements section.
- Added link to Examples folder in the Examples section.
- Change the layout of the README.md to closer match the one of PSDscResources
- Added more detailed text explaining what operating systems WMF5.0 can be installed on.
- Verified all resource schema files with the README.md and fixed some errors (descriptions was not verified).
- Added security requirements section for resource xSQLServerEndpoint and xSQLAOGroupEnsure.
Changes to xSQLServerSetup
- The resource no longer uses Win32_Product WMI class when evaluating if SQL Server Management Studio is installed. See article kb974524 for more information.
- Now it uses CIM cmdlets to get information from WMI classes.
- Resolved all of the PSScriptAnalyzer warnings that was triggered in the common tests.
- Improvement for service accounts to enable support for Managed Service Accounts as well as other nt authority accounts
- Changes to the helper function Copy-ItemWithRoboCopy
  - Robocopy is now started using Start-Process and the error handling has been improved.
  - Robocopy now removes files at the destination path if they no longer exists at the source.
  - Robocopy copies using unbuffered I/O when available (recommended for large files).
- Added a more descriptive text for the parameter SourceCredential to further explain how the parameter work.
- BREAKING CHANGE: Removed parameter SourceFolder.
- BREAKING CHANGE: Removed default value "$PSScriptRoot...." from parameter SourcePath.
- Old code, that no longer filled any function, has been replaced.
  - Function ResolvePath has been replaced with [Environment]::ExpandEnvironmentVariables($SourcePath) so that environment variables still can be used in Source Path.
  - Function NetUse has been replaced with New-SmbMapping and Remove-SmbMapping.
- Renamed function GetSQLVersion to Get-SqlMajorVersion.
- BREAKING CHANGE: Renamed parameter PID to ProductKey to avoid collision with automatic variable $PID
Changes to xSQLServerScript
- All credential parameters now also has the type [System.Management.Automation.Credential()] to better work with PowerShell 4.0.
- It is now possible to configure two instances on the same node, with the same script.
- Added to the description text for the parameter Credential describing how to authenticate using Windows Authentication.
- Added examples to show how to authenticate using either SQL or Windows authentication.
- A recent issue showed that there is a known problem running this resource using PowerShell 4.0. For more information, see issue #273
Changes to xSQLServerFirewall
- BREAKING CHANGE: Removed parameter SourceFolder.
- BREAKING CHANGE: Removed default value "$PSScriptRoot...." from parameter SourcePath.
- Old code, that no longer filled any function, has been replaced.
  - Function ResolvePath has been replaced with [Environment]::ExpandEnvironmentVariables($SourcePath) so that environment variables still can be used in Source Path.
- Adding new optional parameter SourceCredential that can be used to authenticate against SourcePath.
- Solved PSSA rules errors in the code.
- Get-TargetResource no longer return $true when no products was installed.
Changes to the unit test for resource
- xSQLServerSetup
  - Added test coverage for helper function Copy-ItemWithRoboCopy
Changes to xSQLServerLogin
- Removed ShouldProcess statements
- Added the ability to enforce password policies on SQL logins
Added common test (xSQLServerCommon.Tests) for xSQLServer module
- Now all markdown files will be style checked when tests are running in AppVeyor after sending in a pull request.
- Now all Examples will be tested by compiling to a .mof file after sending in a pull request.
Changes to xSQLServerDatabaseOwner
- The example 'SetDatabaseOwner' can now compile, it wrongly had a DependsOn in the example.
Changes to SQLServerRole
- The examples 'AddServerRole' and 'RemoveServerRole' can now compile, it wrongly had a DependsOn in the example.
Changes to CONTRIBUTING.md
- Added section 'Tests for examples files'
- Added section 'Tests for style check of Markdown files'
- Added section 'Documentation with Markdown'
- Added texts to section 'Tests'
Changes to xSQLServerHelper
- added functions
  - Get-SqlDatabaseRecoveryModel
  - Set-SqlDatabaseRecoveryModel
Examples
- xSQLServerDatabaseRecoveryModel
  - 1-SetDatabaseRecoveryModel.ps1
- xSQLServerDatabasePermission
  - 1-GrantDatabasePermissions.ps1
  - 2-RevokeDatabasePermissions.ps1
  - 3-DenyDatabasePermissions.ps1
- xSQLServerFirewall
  - 1-CreateInboundFirewallRules
  - 2-RemoveInboundFirewallRules
Added tests for resources
- xSQLServerDatabaseRecoveryModel
- xSQLServerDatabasePermissions
- xSQLServerFirewall
Changes to xSQLServerDatabaseRecoveryModel
- BREAKING CHANGE: Renamed xSQLDatabaseRecoveryModel to xSQLServerDatabaseRecoveryModel to align with naming convention.
- BREAKING CHANGE: The mandatory parameters now include SQLServer, and SQLInstanceName.
Changes to xSQLServerDatabasePermission
- BREAKING CHANGE: Renamed xSQLServerDatabasePermissions to xSQLServerDatabasePermission to align with naming convention.
- BREAKING CHANGE: The mandatory parameters now include PermissionState, SQLServer, and SQLInstanceName.
Added support for clustered installations to xSQLServerSetup
- Migrated relevant code from xSQLServerFailoverClusterSetup
- Removed Get-WmiObject usage
- Clustered storage mapping now supports asymmetric cluster storage
- Added support for multi-subnet clusters
- Added localized error messages for cluster object mapping
- Updated README.md to reflect new parameters
Updated description for xSQLServerFailoverClusterSetup to indicate it is deprecated.
xPDT helper module
- Function GetxPDTVariable was removed since it no longer was used by any resources.
- File xPDT.xml was removed since it was not used by any resources, and did not provide any value to the module.
Changes xSQLServerHelper module
- Removed the globally defined $VerbosePreference = 'Continue' from xSQLServerHelper.
- Fixed a typo in a variable name in the function New-ListenerADObject.
- Now Restart-SqlService will correctly show the services it restarts. Also fixed PSSA warnings.

4.0.0.0

Fixes in xSQLServerConfiguration
- Added support for clustered SQL instances.
- BREAKING CHANGE: Updated parameters to align with other resources (SQLServer / SQLInstanceName).
- Updated code to utilize CIM rather than WMI.
Added tests for resources
- xSQLServerConfiguration
- xSQLServerSetup
- xSQLServerDatabaseRole
- xSQLAOGroupJoin
- xSQLServerHelper and moved the existing tests for Restart-SqlService to it.
- xSQLServerAlwaysOnService
Fixes in xSQLAOGroupJoin
- Availability Group name now appears in the error message for a failed. Availability Group join attempt.
- Get-TargetResource now works with Get-DscConfiguration.
Fixes in xSQLServerRole
- Updated Ensure parameter to 'Present' default value.
- Renamed helper functions *-SqlServerRole to *-SqlServerRoleMember.
Changes to xSQLAlias
- Add UseDynamicTcpPort parameter for option "Dynamically determine port".
- Change Get-WmiObject to Get-CimInstance in Resource and associated pester file.
Added CHANGELOG.md file.
Added issue template file (ISSUE_TEMPLATE.md) for 'New Issue' and pull request template file (PULL_REQUEST_TEMPLATE.md) for 'New Pull Request'.
Add Contributing.md file.
Changes to xSQLServerSetup
- Now Features parameter is case-insensitive.
BREAKING CHANGE: Removed xSQLServerPowerPlan from this module. The resource has been moved to xComputerManagement and is now called xPowerPlan.
Changes and enhancements in xSQLServerDatabaseRole
- BREAKING CHANGE: Fixed so the same user can now be added to a role in one or more databases, and/or one or more instances. Now the parameters SQLServer and SQLInstanceName are mandatory.
- Enhanced so the same user can now be added to more than one role
BREAKING CHANGE: Renamed xSQLAlias to xSQLServerAlias to align with naming convention.
Changes to xSQLServerAlwaysOnService
- Added RestartTimeout parameter
- Fixed bug where the SQL Agent service did not get restarted after the IsHadrEnabled property was set.
- BREAKING CHANGE: The mandatory parameters now include Ensure, SQLServer, and SQLInstanceName. SQLServer and SQLInstanceName are keys which will be used to uniquely identify the resource which allows AlwaysOn to be enabled on multiple instances on the same machine.
Moved Restart-SqlService from MSFT_xSQLServerConfiguration.psm1 to xSQLServerHelper.psm1.

3.0.0.0

xSQLServerHelper
- added functions
  - Test-SQLDscParameterState
  - Get-SqlDatabaseOwner
  - Set-SqlDatabaseOwner
Examples
- xSQLServerDatabaseOwner
  - 1-SetDatabaseOwner.ps1
Added tests for resources
- MSFT_xSQLServerDatabaseOwner

2.0.0.0

Added resources
- xSQLServerReplication
- xSQLServerScript
- xSQLAlias
- xSQLServerRole
Added tests for resources
- xSQLServerPermission
- xSQLServerEndpointState
- xSQLServerEndpointPermission
- xSQLServerAvailabilityGroupListener
- xSQLServerLogin
- xSQLAOGroupEnsure
- xSQLAlias
- xSQLServerRole
Fixes in xSQLServerAvailabilityGroupListener
- In one case the Get-method did not report that DHCP was configured.
- Now the resource will throw 'Not supported' when IP is changed between Static and DHCP.
- Fixed an issue where sometimes the listener wasn't removed.
- Fixed the issue when trying to add a static IP to a listener was ignored.
Fix in xSQLServerDatabase
- Fixed so dropping a database no longer throws an error
- BREAKING CHANGE: Fixed an issue where it was not possible to add the same database to two instances on the same server.
- BREAKING CHANGE: The name of the parameter Database has changed. It is now called Name.
Fixes in xSQLAOGroupEnsure
- Added parameters to New-ListenerADObject to allow usage of a named instance.
- pass setup credential correctly
Changes to xSQLServerLogin
- Fixed an issue when dropping logins.
- BREAKING CHANGE: Fixed an issue where it was not possible to add the same login to two instances on the same server.
Changes to xSQLServerMaxDop
- BREAKING CHANGE: Made SQLInstance parameter a key so that multiple instances on the same server can be configured

1.8.0.0

Converted appveyor.yml to install Pester from PSGallery instead of from Chocolatey.
Added Support for SQL Server 2016
xSQLAOGroupEnsure
- Fixed spelling mistake in AutoBackupPreference property
- Added BackupPriority property
Added resources
- xSQLServerPermission
- xSQLServerEndpointState
- xSQLServerEndpointPermission
- xSQLServerAvailabilityGroupListener
xSQLServerHelper
- added functions
  - Import-SQLPSModule
  - Get-SQLPSInstanceName
  - Get-SQLPSInstance
  - Get-SQLAlwaysOnEndpoint
- modified functions
  - New-TerminatingError - added optional parameter InnerException to be able to give the user more information in the returned message

1.7.0.0

Resources Added
- xSQLServerConfiguration

1.6.0.0

Resources Added
- xSQLAOGroupEnsure
- xSQLAOGroupJoin
- xWaitForAvailabilityGroup
- xSQLServerEndPoint
- xSQLServerAlwaysOnService
xSQLServerHelper
- added functions
  - Connect-SQL
  - New-VerboseMessage
  - Grant-ServerPerms
  - Grant-CNOPerms
  - New-ListenerADObject
xSQLDatabaseRecoveryModel
- Updated Verbose statements to use new function New-VerboseMessage
xSQLServerDatabase
- Updated Verbose statements to use new function New-VerboseMessage
- Removed ConnectSQL function and replaced with new Connect-SQL function
xSQLServerDatabaseOwner
- Removed ConnectSQL function and replaced with new Connect-SQL function
xSQLServerDatabasePermissions
- Removed ConnectSQL function and replaced with new Connect-SQL function
xSQLServerDatabaseRole
- Removed ConnectSQL function and replaced with new Connect-SQL function
xSQLServerLogin
- Removed ConnectSQL function and replaced with new Connect-SQL function
xSQLServerMaxDop
- Updated Verbose statements to use new function New-VerboseMessage
- Removed ConnectSQL function and replaced with new Connect-SQL function
xSQLServerMemory
- Updated Verbose statements to use new function New-VerboseMessage
- Removed ConnectSQL function and replaced with new Connect-SQL function
xSQLServerPowerPlan
- Updated Verbose statements to use new function New-VerboseMessage
Examples
- Added xSQLServerConfiguration resource example

1.5.0.0

Added new resource xSQLServerDatabase that allows adding an empty database to a server

1.4.0.0

Resources Added
- xSQLDatabaseRecoveryModeAdded
- xSQLServerDatabaseOwner
- xSQLServerDatabasePermissions
- xSQLServerDatabaseRole
- xSQLServerLogin
- xSQLServerMaxDop
- xSQLServerMemory
- xSQLServerPowerPlan
- xSQLServerDatabase
xSQLServerSetup:
- Corrected bug in GetFirstItemPropertyValue to correctly handle registry keys with only one value.
- Added support for SQL Server
- 2008 R2 installation
- Removed default values for parameters, to avoid compatibility issues and setup errors
- Added Replication sub feature detection
- Added setup parameter BrowserSvcStartupType
- Change SourceFolder to Source to allow for multi version Support
- Add Source Credential for accessing source files
- Add Parameters for SQL Server configuration
- Add Parameters to SuppressReboot or ForceReboot
xSQLServerFirewall
- Removed default values for parameters, to avoid compatibility issues
- Updated firewall rule name to not use 2012 version, since package supports 2008, 2012 and 2014 versions
- Additional of SQLHelper Function and error handling
- Change SourceFolder to Source to allow for multi version Support
xSQLServerNetwork
- Added new resource that configures network settings.
- Currently supports only tcp network protocol
- Allows to enable and disable network protocol for specified instance service
- Allows to set custom or dynamic port values
xSQLServerRSSecureConnectionLevel
- Additional of SQLHelper Function and error handling
xSqlServerRSConfig
xSQLServerFailoverClusterSetup
- Additional of SQLHelper Function and error handling
- Change SourceFolder to Source to allow for multi version Support
- Add Parameters to SuppressReboot or ForceReboot
Examples
- Updated example files to use correct DebugMode parameter value ForceModuleImport, this is not boolean in WMF 5.0 RTM
- Added xSQLServerNetwork example

1.3.0.0

xSqlServerSetup
- Make Features case-insensitive.

1.2.1.0

Increased timeout for setup process to start to 60 seconds.

1.2.0.0

Updated release with the following new resources
- xSQLServerFailoverClusterSetup
- xSQLServerRSConfig

1.1.0.0

Initial release with the following resources
- xSQLServerSetup
- xSQLServerFirewall
- xSQLServerRSSecureConnectionLevel

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

CHANGELOG.md

CHANGELOG.md

Change log for SqlServerDsc

Unreleased

12.5.0.0

12.4.0.0

12.3.0.0

12.2.0.0

12.1.0.0

12.0.0.0

11.4.0.0

11.3.0.0

11.2.0.0

11.1.0.0

11.0.0.0

10.0.0.0

9.0.0.0

8.2.0.0

8.1.0.0

8.0.0.0

7.1.0.0

7.0.0.0

6.0.0.0

5.0.0.0

4.0.0.0

3.0.0.0

2.0.0.0

1.8.0.0

1.7.0.0

1.6.0.0

1.5.0.0

1.4.0.0

1.3.0.0

1.2.1.0

1.2.0.0

1.1.0.0

Files

CHANGELOG.md

Latest commit

History

CHANGELOG.md

File metadata and controls

Change log for SqlServerDsc

Unreleased

12.5.0.0

12.4.0.0

12.3.0.0

12.2.0.0

12.1.0.0

12.0.0.0

11.4.0.0

11.3.0.0

11.2.0.0

11.1.0.0

11.0.0.0

10.0.0.0

9.0.0.0

8.2.0.0

8.1.0.0

8.0.0.0

7.1.0.0

7.0.0.0

6.0.0.0

5.0.0.0

4.0.0.0

3.0.0.0

2.0.0.0

1.8.0.0

1.7.0.0

1.6.0.0

1.5.0.0

1.4.0.0

1.3.0.0

1.2.1.0

1.2.0.0

1.1.0.0