en devel environment variables

Environment Variables

This page describes the environment variables that must be set to use RSD. The required environment variables depend on what you want to do.
This page considers the following three purposes.

• Software simulation
• Boot on Xilinx Zynq FPGA boards
• Synthesis for ASIC (experimental)

All the environment variables of RSD are written in SetEnv.* file in Processor/Tools/SetEnv.

• SetEnv.bat : for Windows
• SetEnv.sh : for Linux

Please copy the SetEnv.* to MySetEnv.* to create your own SetEnv file.
(MySetEnv.* is gitignored.)

Necessary Environment Variables

The followings are necessary for all the three purposes.

Variable Name	Detail
RSD_ROOT	Specify the root directory where you checked out RSD.
RSD_GCC_PATH	Specify the directory that contains a RISC-V GCC binary.
RSD_GCC_PREFIX	Specify the prefix of the RISC-V GCC binary. Example: riscv32-unknown-elf-

For Software Simulation

Some environment variables below are also required to simulate RSD on software simulators, depending on the simulator you use.

• Mentor QuestaSim, Mentor ModelSim

  Variable Name	Detail
  RSD_QUESTASIM_PATH	Specify the bin directory of Modelsim or QuestaSim.

• Verilator

  No additional variable is required.
  Make sure the verilator command is functioning.

• Xilinx Vitis (Vivado)

  Variable Name	Detail
  RSD_VIVADO_BIN	Specify the bin directory of Vivado. Example: /Xilinx_tool_install_path/Vivado/2019.2/bin

For Boot on Xilinx Zynq FPGA Boards

The followings are also required to boot RSD on Xilinx Zynq FPGA boards.

Variable Name	Detail
RSD_VIVADO_BIN	Specify the bin directory of Vivado. Example: /Xilinx_tool_install_path/Vivado/2019.2/bin
RSD_ARM_LINUX	Specify a directory where Zynq PS Linux is downloaded and built. A directory outside $(RSD_ROOT) is recommended.

For Synthesis for ASIC (experimental)

The following is also required to synthesize RSD for ASIC.

Variable Name	Detail
RSD_DC_SHELL_BIN	Specify the dc_shell directory of Design Compiler.