Official 1.17 Release Docs (#18011)

* feat: graduate TaintNodesByCondition to GA (#17073) * Promote StartupProbe to beta (enabled by default). (#17164) * Watch bookmarks to GA (#17026) * feat: graduate ScheduleDaemonSetPods to GA (#17350) * Update Docker installation instructions (#17405) * Use exact version numbers for installing Docker in Ubuntu (#17428) * Move CSIMigration and CSIMigrationGCE to Beta in Kubernetes v1.17 (#17478) * Promote NodeLease feature to GA (#17189) * Update docs for csi topology ga (#17408) * Update RunAsUsername to beta (#17460) * doc:Update RunAsUsername to beta * doc: update samples - kubernetes.io/os is no longer beta * Updating based on review feedback * Promote Node-specific volume limits to GA (#17432) * Promote PodShareProcessNamespace to stable (#17192) * Promote PodShareProcessNamespace to stable * Add for_k8s_version to feature-state label Co-Authored-By: Tim Bannister <[email protected]> * Readd version-check to shareProcessNamespace task * Update service load balancer finalizer doc for GA (#17438) * Update Topology Manager docs (#17451) * Added information on how device plugins can take advantage of Topology Manager * Updated the Topology Manager documentation to include additionalinformation and update some out of date sections * Fix broken Topology Manager link (#17746) Part of What's Next Device Plugin section * Update CRD defaulting docs for GA (#17450) * Add documentation for VolumeSnapshot Beta (#17233) * Updating EndpointSlice documentation for beta release in 1.17 (#17411) * (docs/dualstack): v1.17 updates (#17457) * Add placehold doc updates for dualstack in 1.17 Signed-off-by: Lachlan Evenson <[email protected]> * Add Downward API and /etc/hosts Pod IP validation Signed-off-by: Lachlan Evenson <[email protected]> * remove addressed known issue via k/k pr 85246 Signed-off-by: Lachlan Evenson <[email protected]> * Remove known issue and add flag as part of k/k 79993 Signed-off-by: Lachlan Evenson <[email protected]> * remove follow up placeholders Signed-off-by: Lachlan Evenson <[email protected]> * Update verbiage Signed-off-by: Lachlan Evenson <[email protected]> * Make IP addressing consistent throughout the task Signed-off-by: Lachlan Evenson <[email protected]> * Update to status.podIPs Signed-off-by: Lachlan Evenson <[email protected]> * Update content/en/docs/tasks/network/validate-dual-stack.md Use set instead of env Co-Authored-By: Khaled Henidak (Kal) <[email protected]> * add topology.kubernetes.io/zone, topology.kubernetes.io/region and node.kubernetes.io/instance-type labels to docs (#17498) Signed-off-by: Andrew Sy Kim <[email protected]> * Service topology alpha documentation (#17459) * Update list of feature flags for in-tree plugins migrated to CSI (#17533) Signed-off-by: Deep Debroy <[email protected]> * Update Node concept for TaintNodesByCondition going GA (#17577) * feat: graduate ResourceQuotaScopeSelectors to GA in 1.17 (#17554) * kubeadm: update the upgrade documentation for 1.17 (#17587) * doc: Simplify Windows deployments with RuntimeClass (#16697) * doc: Simplify Windows deployments with RuntimeClass * Updating on review feedback * doc: Adding windows-build label from enhancement 1301 * update doc for kubelet option --reserved-cpus (#17648) * feat: update TaintNodesByCondition in feature gates table (#17377) * Update docs for v1 resource quota configuration (#17547) * AdmissionConfiguration v1 (#17548) * Update WebhookAdmissionConfiguration examples (#17549) * Update AWS EBS Migration Feature state (#16126) * Add resource version section to api-concepts documentation (#16910) * Add Resource Version semantics section to api concepts * Clarify risks of going back in time, add details about compaction and watch cache sizes * Apply suggestions from liggitt Co-Authored-By: Jordan Liggitt <[email protected]> * remove pesudocode, apply feedback * Fix typo * Clarify equality rules * Cleanup kubectl generators docs (#17609) * Write ReplicationController without a space * Drop mentioning unsupported cluster versions * Fix capitalization for “API group” * Tweak wording * Avoid using deprecated generator in example * add Antrea description in dev-1.17 (#17919) * Promote VolumeSubpathEnvExpansion to GA * Reference Documentation for the Kubernetes API for 1.17 (#18019) * Update feature-gates.md (#18033) * Reference Documentation for kubectl Commands for 1.17 (#18017) * Update for v1.17 (#18034) * Update config.toml(release-1.17) for 1.17 (#18031)
kubernetes · Dec 10, 2019 · dff2f7b · dff2f7b
1 parent cf925bb
commit dff2f7b
Show file tree

Hide file tree

Showing 63 changed files with 62,950 additions and 438 deletions.
diff --git a/config.toml b/config.toml
@@ -66,10 +66,10 @@ time_format_blog = "Monday, January 02, 2006"
 description = "Production-Grade Container Orchestration"
 showedit = true
 
-latest = "v1.16"
+latest = "v1.17"
 
-fullversion = "v1.16.0"
-version = "v1.16"
+fullversion = "v1.17.0"
+version = "v1.17"
 githubbranch = "master"
 docsbranch = "master"
 deprecated = false
@@ -84,10 +84,10 @@ announcement = false
 announcement_message = "The Kubernetes Documentation team would like your feedback!  Please take a <a href='https://www.surveymonkey.com/r/8R237FN' target='_blank'>short survey</a> so we can improve the Kubernetes online documentation."
 
 [[params.versions]]
-fullversion = "v1.16.0"
-version = "v1.16"
-githubbranch = "v1.16.0"
-docsbranch = "release-1.16"
+fullversion = "v1.17.0"
+version = "v1.17"
+githubbranch = "v1.17.0"
+docsbranch = "release-1.17"
 url = "https://kubernetes.io"
 
 [params.pushAssets]
@@ -102,33 +102,33 @@ js = [
 ]
 
 [[params.versions]]
-fullversion = "v1.15.3"
+fullversion = "v1.16.3"
+version = "v1.16"
+githubbranch = "v1.16.3"
+docsbranch = "release-1.16"
+url = "https://v1-16.docs.kubernetes.io"
+
+[[params.versions]]
+fullversion = "v1.15.6"
 version = "v1.15"
-githubbranch = "v1.15.3"
+githubbranch = "v1.15.6"
 docsbranch = "release-1.15"
 url = "https://v1-15.docs.kubernetes.io"
 
 [[params.versions]]
-fullversion = "v1.14.6"
+fullversion = "v1.14.9"
 version = "v1.14"
-githubbranch = "v1.14.6"
+githubbranch = "v1.14.9"
 docsbranch = "release-1.14"
 url = "https://v1-14.docs.kubernetes.io"
 
 [[params.versions]]
-fullversion = "v1.13.10"
+fullversion = "v1.13.12"
 version = "v1.13"
-githubbranch = "v1.13.10"
+githubbranch = "v1.13.12"
 docsbranch = "release-1.13"
 url = "https://v1-13.docs.kubernetes.io"
 
-[[params.versions]]
-fullversion = "v1.12.10"
-version = "v1.12"
-githubbranch = "v1.12.10"
-docsbranch = "release-1.12"
-url = "https://v1-12.docs.kubernetes.io"
-
 # Language definitions.
 
 [languages]

diff --git a/content/en/docs/concepts/architecture/nodes.md b/content/en/docs/concepts/architecture/nodes.md
@@ -81,19 +81,10 @@ the `Terminating` or `Unknown` state. In cases where Kubernetes cannot deduce fr
 permanently left a cluster, the cluster administrator may need to delete the node object by hand.  Deleting the node object from
 Kubernetes causes all the Pod objects running on the node to be deleted from the apiserver, and frees up their names.
 
-In version 1.12, `TaintNodesByCondition` feature is promoted to beta, so node lifecycle controller automatically creates
+The node lifecycle controller automatically creates
 [taints](/docs/concepts/configuration/taint-and-toleration/) that represent conditions.
-Similarly the scheduler ignores conditions when considering a Node; instead
-it looks at the Node's taints and a Pod's tolerations.
-
-Now users can choose between the old scheduling model and a new, more flexible scheduling model.
-A Pod that does not have any tolerations gets scheduled according to the old model. But a Pod that
-tolerates the taints of a particular Node can be scheduled on that Node.
-
-{{< caution >}}
-Enabling this feature creates a small delay between the
-time when a condition is observed and when a taint is created. This delay is usually less than one second, but it can increase the number of Pods that are successfully scheduled but rejected by the kubelet.
-{{< /caution >}}
+When the scheduler is assigning a Pod to a Node, the scheduler takes the Node's taints
+into account, except for any taints that the Pod tolerates.
 
 ### Capacity and Allocatable {#capacity}
 
@@ -172,18 +163,28 @@ to be unreachable. (The default timeouts are 40s to start reporting
 ConditionUnknown and 5m after that to start evicting pods.) The node controller
 checks the state of each node every `--node-monitor-period` seconds.
 
-In versions of Kubernetes prior to 1.13, NodeStatus is the heartbeat from the
-node. Node lease feature is enabled by default since 1.14 as a beta feature
-(feature gate `NodeLease`, [KEP-0009](https://github.com/kubernetes/enhancements/blob/master/keps/sig-node/0009-node-heartbeat.md)).
-When node lease feature is enabled, each node has an associated `Lease` object in
-`kube-node-lease` namespace that is renewed by the node periodically, and both
-NodeStatus and node lease are treated as heartbeats from the node. Node leases
-are renewed frequently while NodeStatus is reported from node to master only
-when there is some change or enough time has passed (default is 1 minute, which
-is longer than the default timeout of 40 seconds for unreachable nodes). Since
-node lease is much more lightweight than NodeStatus, this feature makes node
-heartbeat significantly cheaper from both scalability and performance
-perspectives.
+#### Heartbeats
+
+Heartbeats, sent by Kubernetes nodes, help determine the availability of a node.
+There are two forms of heartbeats: updates of `NodeStatus` and the
+[Lease object](/docs/reference/generated/kubernetes-api/{{< latest-version >}}/#lease-v1-coordination-k8s-io).
+Each Node has an associated Lease object in the `kube-node-lease`
+{{< glossary_tooltip term_id="namespace" text="namespace">}}.
+Lease is a lightweight resource, which improves the performance
+of the node heartbeats as the cluster scales.
+
+The kubelet is responsible for creating and updating the `NodeStatus` and
+a Lease object.
+
+- The kubelet updates the `NodeStatus` either when there is change in status,
+  or if there has been no update for a configured interval. The default interval
+  for `NodeStatus` updates is 5 minutes (much longer than the 40 second default
+  timeout for unreachable nodes).
+- The kubelet creates and then updates its Lease object every 10 seconds
+  (the default update interval). Lease updates occur independently from the
+  `NodeStatus` updates.
+
+#### Reliability
 
 In Kubernetes 1.4, we updated the logic of the node controller to better handle
 cases when a large number of nodes have problems with reaching the master

diff --git a/content/en/docs/concepts/configuration/assign-pod-node.md b/content/en/docs/concepts/configuration/assign-pod-node.md
@@ -76,9 +76,12 @@ In addition to labels you [attach](#step-one-attach-label-to-the-node), nodes co
 with a standard set of labels. These labels are
 
 * [`kubernetes.io/hostname`](/docs/reference/kubernetes-api/labels-annotations-taints/#kubernetes-io-hostname)
-* [`failure-domain.beta.kubernetes.io/zone`](/docs/reference/kubernetes-api/labels-annotations-taints/#failure-domain-beta-kubernetes-io-zone)
-* [`failure-domain.beta.kubernetes.io/region`](/docs/reference/kubernetes-api/labels-annotations-taints/#failure-domain-beta-kubernetes-io-region)
+* [`failure-domain.beta.kubernetes.io/zone`](/docs/reference/kubernetes-api/labels-annotations-taints/#failure-domainbetakubernetesiozone)
+* [`failure-domain.beta.kubernetes.io/region`](/docs/reference/kubernetes-api/labels-annotations-taints/#failure-domainbetakubernetesioregion)
+* [`topology.kubernetes.io/zone`](/docs/reference/kubernetes-api/labels-annotations-taints/#topologykubernetesiozone)
+* [`topology.kubernetes.io/region`](/docs/reference/kubernetes-api/labels-annotations-taints/#topologykubernetesiozone)
 * [`beta.kubernetes.io/instance-type`](/docs/reference/kubernetes-api/labels-annotations-taints/#beta-kubernetes-io-instance-type)
+* [`node.kubernetes.io/instance-type`](/docs/reference/kubernetes-api/labels-annotations-taints/#nodekubernetesioinstance-type)
 * [`kubernetes.io/os`](/docs/reference/kubernetes-api/labels-annotations-taints/#kubernetes-io-os)
 * [`kubernetes.io/arch`](/docs/reference/kubernetes-api/labels-annotations-taints/#kubernetes-io-arch)
 

diff --git a/content/en/docs/concepts/configuration/taint-and-toleration.md b/content/en/docs/concepts/configuration/taint-and-toleration.md
@@ -280,7 +280,7 @@ which matches the behavior when this feature is disabled.
 
 ## Taint Nodes by Condition
 
-In version 1.12, `TaintNodesByCondition` feature is promoted to beta, so node lifecycle controller automatically creates taints corresponding to
+The node lifecycle controller automatically creates taints corresponding to
 Node conditions.
 Similarly the scheduler does not check Node conditions; instead the scheduler checks taints. This assures that Node conditions don't affect what's scheduled onto the Node. The user can choose to ignore some of the Node's problems (represented as Node conditions) by adding appropriate Pod tolerations.
 Note that `TaintNodesByCondition` only taints nodes with `NoSchedule` effect. `NoExecute` effect is controlled by `TaintBasedEviction` which is a beta feature and enabled by default since version 1.13.

diff --git a/content/en/docs/concepts/extend-kubernetes/api-extension/custom-resources.md b/content/en/docs/concepts/extend-kubernetes/api-extension/custom-resources.md
@@ -174,7 +174,7 @@ Aggregated APIs offer more advanced API features and customization of other feat
 | Feature | Description | CRDs | Aggregated API |
 | ------- | ----------- | ---- | -------------- |
 | Validation | Help users prevent errors and allow you to evolve your API independently of your clients. These features are most useful when there are many clients who can't all update at the same time. | Yes.  Most validation can be specified in the CRD using [OpenAPI v3.0 validation](/docs/tasks/access-kubernetes-api/extend-api-custom-resource-definitions/#validation).  Any other validations supported by addition of a [Validating Webhook](/docs/reference/access-authn-authz/admission-controllers/#validatingadmissionwebhook-alpha-in-1-8-beta-in-1-9). | Yes, arbitrary validation checks |
-| Defaulting | See above | Yes, either via [OpenAPI v3.0 validation](/docs/tasks/access-kubernetes-api/extend-api-custom-resource-definitions/#defaulting) `default` keyword (beta in 1.16), or via a [Mutating Webhook](/docs/reference/access-authn-authz/admission-controllers/#mutatingadmissionwebhook-beta-in-1-9) | Yes |
+| Defaulting | See above | Yes, either via [OpenAPI v3.0 validation](/docs/tasks/access-kubernetes-api/extend-api-custom-resource-definitions/#defaulting) `default` keyword (GA in 1.17), or via a [Mutating Webhook](/docs/reference/access-authn-authz/admission-controllers/#mutatingadmissionwebhook) (though this will not be run when reading from etcd for old objects) | Yes |
 | Multi-versioning | Allows serving the same object through two API versions. Can help ease API changes like renaming fields. Less important if you control your client versions. | [Yes](/docs/tasks/access-kubernetes-api/custom-resources/custom-resource-definition-versioning) | Yes |
 | Custom Storage | If you need storage with a different performance mode (for example, time-series database instead of key-value store) or isolation for security (for example, encryption secrets or different | No | Yes |
 | Custom Business Logic | Perform arbitrary checks or actions when creating, reading, updating or deleting an object | Yes, using [Webhooks](/docs/reference/access-authn-authz/extensible-admission-controllers/#admission-webhooks). | Yes |

diff --git a/content/en/docs/concepts/extend-kubernetes/compute-storage-net/device-plugins.md b/content/en/docs/concepts/extend-kubernetes/compute-storage-net/device-plugins.md
@@ -184,6 +184,32 @@ DaemonSet, `/var/lib/kubelet/pod-resources` must be mounted as a
 
 Support for the "PodResources service" requires `KubeletPodResources` [feature gate](/docs/reference/command-line-tools-reference/feature-gates/) to be enabled. It is enabled by default starting with Kubernetes 1.15.
 
+## Device Plugin integration with the Topology Manager
+
+{{< feature-state for_k8s_version="v1.17" state="alpha" >}}
+
+The Topology Manager is a Kubelet component that allows resources to be co-ordintated in a Topology aligned manner. In order to do this, the Device Plugin API was extended to include a `TopologyInfo` struct. 
+
+
+```gRPC
+message TopologyInfo {
+	repeated NUMANode nodes = 1;
+}
+
+message NUMANode {
+    int64 ID = 1;
+}
+```
+Device Plugins that wish to leverage the Topology Manager can send back a populated TopologyInfo struct as part of the device registration, along with the device IDs and the health of the device. The device manager will then use this information to consult with the Topology Manager and make resource assingment decisions.
+
+`TopologyInfo` supports a `nodes` field that is either `nil` (the default) or a list of NUMA nodes. This lets the Device Plugin publish that can span NUMA nodes.
+
+An example `TopologyInfo` struct populated for a device by a Device Plugin:
+
+```
+pluginapi.Device{ID: "25102017", Health: pluginapi.Healthy, Topology:&pluginapi.TopologyInfo{Nodes: []*pluginapi.NUMANode{&pluginapi.NUMANode{ID: 0,},}}}
+```
+
 ## Device plugin examples {#examples}
 
 Here are some examples of device plugin implementations:
@@ -205,5 +231,6 @@ Here are some examples of device plugin implementations:
 * Learn about [scheduling GPU resources](/docs/tasks/manage-gpus/scheduling-gpus/) using device plugins
 * Learn about [advertising extended resources](/docs/tasks/administer-cluster/extended-resource-node/) on a node
 * Read about using [hardware acceleration for TLS ingress](https://kubernetes.io/blog/2019/04/24/hardware-accelerated-ssl/tls-termination-in-ingress-controllers-using-kubernetes-device-plugins-and-runtimeclass/) with Kubernetes
+* Learn about the [Topology Manager] (/docs/tasks/adminster-cluster/topology-manager/)
 
 {{% /capture %}}
diff --git a/content/en/docs/concepts/policy/resource-quotas.md b/content/en/docs/concepts/policy/resource-quotas.md
@@ -537,12 +537,33 @@ With this mechanism, operators will be able to restrict usage of certain high pr
 
 To enforce this, kube-apiserver flag `--admission-control-config-file` should be used to pass path to the following configuration file:
 
+{{< tabs name="example1" >}}
+{{% tab name="apiserver.config.k8s.io/v1" %}}
 ```yaml
+apiVersion: apiserver.config.k8s.io/v1
+kind: AdmissionConfiguration
+plugins:
+- name: "ResourceQuota"
+  configuration:
+    apiVersion: apiserver.config.k8s.io/v1
+    kind: ResourceQuotaConfiguration
+    limitedResources:
+    - resource: pods
+      matchScopes:
+      - scopeName: PriorityClass 
+        operator: In
+        values: ["cluster-services"]
+```
+{{% /tab %}}
+{{% tab name="apiserver.k8s.io/v1alpha1" %}}
+```yaml
+# Deprecated in v1.17 in favor of apiserver.config.k8s.io/v1
 apiVersion: apiserver.k8s.io/v1alpha1
 kind: AdmissionConfiguration
 plugins:
 - name: "ResourceQuota"
   configuration:
+    # Deprecated in v1.17 in favor of apiserver.config.k8s.io/v1, ResourceQuotaConfiguration
     apiVersion: resourcequota.admission.k8s.io/v1beta1
     kind: Configuration
     limitedResources:
@@ -552,6 +573,8 @@ plugins:
         operator: In
         values: ["cluster-services"]
 ```
+{{% /tab %}}
+{{< /tabs >}}
 
 Now, "cluster-services" pods will be allowed in only those namespaces where a quota object with a matching `scopeSelector` is present.
 For example:

diff --git a/content/en/docs/concepts/services-networking/dual-stack.md b/content/en/docs/concepts/services-networking/dual-stack.md
@@ -51,6 +51,7 @@ To enable IPv4/IPv6 dual-stack, enable the `IPv6DualStack` [feature gate](/docs/
       * `--feature-gates="IPv6DualStack=true"`
       * `--cluster-cidr=<IPv4 CIDR>,<IPv6 CIDR>` eg. `--cluster-cidr=10.244.0.0/16,fc00::/24`
       * `--service-cluster-ip-range=<IPv4 CIDR>,<IPv6 CIDR>`
+      * `--node-cidr-mask-size-ipv4|--node-cidr-mask-size-ipv6` defaults to /24 for IPv4 and /64 for IPv6
    * kubelet:
       * `--feature-gates="IPv6DualStack=true"`
    * kube-proxy:
@@ -98,9 +99,7 @@ The use of publicly routable and non-publicly routable IPv6 address blocks is ac
 
 ## Known Issues
 
-   * IPv6 network block assignment uses the default IPv4 CIDR block size (/24)
    * Kubenet forces IPv4,IPv6 positional reporting of IPs (--cluster-cidr)
-   * Dual-stack networking does not function if the `EndpointSlice` feature gate is enabled.
 
 {{% /capture %}}
 

diff --git a/content/en/docs/concepts/services-networking/endpoint-slices.md b/content/en/docs/concepts/services-networking/endpoint-slices.md
@@ -14,7 +14,7 @@ weight: 10
 
 {{% capture overview %}}
 
-{{< feature-state for_k8s_version="v1.16" state="alpha" >}}
+{{< feature-state for_k8s_version="v1.17" state="beta" >}}
 
 _Endpoint Slices_ provide a simple way to track network endpoints within a
 Kubernetes cluster. They offer a more scalable and extensible alternative to
@@ -26,7 +26,7 @@ Endpoints.
 
 ## Endpoint Slice resources {#endpointslice-resource}
 
-In Kubernetes, an Endpoint Slice contains references to a set of network
+In Kubernetes, an EndpointSlice contains references to a set of network
 endpoints. The EndpointSlice controller automatically creates Endpoint Slices
 for a Kubernetes Service when a selector is specified. These Endpoint Slices
 will include references to any Pods that match the Service selector. Endpoint
@@ -36,21 +36,20 @@ As an example, here's a sample EndpointSlice resource for the `example`
 Kubernetes Service.
 
 ```yaml
-apiVersion: discovery.k8s.io/v1alpha1
+apiVersion: discovery.k8s.io/v1beta1
 kind: EndpointSlice
 metadata:
   name: example-abc
   labels:
     kubernetes.io/service-name: example
-addressType: IP
+addressType: IPv4
 ports:
   - name: http
     protocol: TCP
     port: 80
 endpoints:
   - addresses:
     - "10.1.2.3"
-    - "2001:db8::1234:5678"
     conditions:
       ready: true
     hostname: pod-1
@@ -67,6 +66,14 @@ Endpoint Slices can act as the source of truth for kube-proxy when it comes to
 how to route internal traffic. When enabled, they should provide a performance
 improvement for services with large numbers of endpoints.
 
+## Address Types
+
+EndpointSlices support three address types:
+
+* IPv4
+* IPv6
+* FQDN (Fully Qualified Domain Name)
+
 ## Motivation
 
 The Endpoints API has provided a simple and straightforward way of