2016 10 24 gensim agenda

Agenda for GENSIM Workshop, October 2016

This page contains the agenda and links to slides for the GENSIM workshop. Slides are linked from the agenda below, and all slides, instructions for hands-on examples and models can also be accessed at https://github.com/ibpsa/project1/tree/master/meetings/2016-10-24-gensim.

The meeting is at the Salle de Spectacle.

Time	Description	Presenter	Downloads
10:30	Modelica overview. Modelica training, following http://book.xogeny.com.	Michael Wetter, LBNL	Overview slides. Training slides.
12:30	Lunch
14:00	Continuation of Modelica training	Michael Wetter, LBNL
15:30	Break
16:00	Annex 60 library hands-on training (heat transfer, fluid flow, controls, HVAC)	Filip Jorissen, KU Leuven
18:00	Adjourn

Time	Description	Presenter	Downloads
8:30	Modelica presentation: Advanced concepts: Algebraic loops and how to avoid them. Practical applications of these guidelines for the configuration of hydronic and air flow circuits, and for steady-state and dynamic balances. Practical applications of these guidelines for flow reversal. How to choose integrator.	Filip Jorissen, KU Leuven	Slides.
10:00	Break
10:30	TEASER workshop for ROM modeling. Coupled building and HVAC modeling, hands-on training using Annex 60 library.	Moritz Lauster, RWTH Aachen	Slides. Models and more. Models.
12:30	Lunch
14:30	FMI and co-simulation presentation and hands-on training.	Michael Wetter, LBNL	Slides.
15:30	Break
16:00	Hands-on training for how to build a system model, following Boiler model tutorial.	Michael Wetter, LBNL
17:00	Continue Annex 60 library hands-on training, drawing examples from some libraries, such as IDEAS for use of advanced concepts.	Filip Jorissen, KU Leuven
18:00	Break
18:30	Poster session
19:30	Adjourn

Time	Description	Presenter	Downloads
8:30	Modelica Library presentation (15 min. each): Buildings (LBNL) AixLib (RWTH Aachen) IDEAS (KU Leuven) BuildingSystems (Universitaet der Kuenste Berlin) BuildSysPro (EdF) Discussion.	Michael Wetter, LBNL Moritz Lauster, RWTH Aachen Filip Jorissen, KU Leuven Matthis Thorade, UdK Berlin Mathieu Schumann, EDF	Buildings slides. AixLib slides. IDEAS slides. BuildingSystems slides.
10:00	Break
10:30	BIM/GIS presentation. BIM training or demonstration.	Matthis Thorade, Universitaet der Kuenste Berlin	BIM/GIS slides.
12:30	Lunch
14:00	Hike/walk, until around 18:00.

Time	Description	Presenter	Downloads
8:30	From building to district energy assessment - stochasticity and flexibility in a bottom-up approach. Benefits and challenges of building design evaluation on a district level. Stochastic occupant behavior and energy flexibility.	Glenn Reynders, KU Leuven	Slides.
10:00	Break
10:30	Workshop/training on district energy modeling. Neighborhood case study simulated with IDEAS library.	Glenn Reynders, KU Leuven
12:30	Lunch
15:00	Modelica model use in building operation: Lessons from Annex 60.	Raymond Sterling, Nat. Univ. of Ireland	Slides.
16:30	Break
17:00	Workshop: applications and case studies. DACCOSIM, open-source co-simulation master platform. Workflow automation tool. Exporting and importing FMUs.	Jean-Philippe Tavella, EdF Simon Roucher, LOCIE Michael Wetter, LBNL	Workflow automation tools Instructions for FMU exercise.
19:00	Adjourn

Time	Description	Presenter	Downloads
9:00	Continuation of IEA EBC Annex 60 as IBPSA Project 1.	Michael Wetter, LBNL	Slides.
9:45	Round table discussion about Project 1, GENSIM and the Modelica/FMI ecosystem.
11:00	Adjourn