Upgrade to Blacklight 7, Bootstrap 4 and Rails 6.0 #5730
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
gratefully, this is working well enough to load the hyrax homepage. forcing a build via CI.
following instructions here: https://github.com/projectblacklight/blacklight/wiki/Update-to-Blacklight-7.0.1 Blacklight::Utils is removed, and this `needs_attr_accessible` check is for legacy Rails support. it's not needed anymore.
this callback was removed in blacklight 7, so we don't need to skip it anymore.
Blacklight::SearchHelper was removed, and its functionality relocated to `#search_service`. update layouts per https://github.com/projectblacklight/blacklight/wiki/Update-to-Blacklight-7.0.1 step 7. hyrax has its own `flash_msg` partial, so we don't redirect to the new blacklight path.
it's not clear why `facet.field` isn't in the solr_parameters anymore. we need to investigate this change in Blacklight 7 and determine if the `suppressed_bsi` field should still get injected. maybe this whole builder can now be removed? what's the story? in the meanwhile, at least this doesn't error on NilClass NoMethodError.
projectblacklight/blacklight#2457 changed the behaviour of Blacklight::Solr::Request instances to not initialize their parameters to []. Since the *_for_non_admins builders presently simply return if the current user is an admin, these parameters are never set and remain nil during these tests.
Our `SearchService` was originally essentially backported BL7 code. I don’t think it’s safe to remove completely (yet), but I at least deferred what I could to the Blacklight 7 implementation. Removing the rest may be a project for a later time.
This is BROKEN and SOLELY a variable rename in order to get the SCSS files to actually compile (e·g during assets:precompile). There is likely a LOT more work to be done here and none of these variable renames have been checked to see if they are actually good and proper. On the plus side, the site actually has styling now.
This is required by Bootstrap 4.
This is required by Bootstrap 4.
Required for Bootstrap 4. - .control-label 🔜 .col-form-label - .form-group-* 🔜 .form-control-* - .help-block 🔜 .form-text
This is the new Bootstrap 4 name.
.btn-xs has been removed from Bootstrap 4 with .btn-sm as an alternative.
For Bootstrap 4. .form-horizontal appears to have been dropped and .row needs to be added to .form-groups instead.
- .col-xs-$ is now just .col-$ - .col-$-push-¢ and .col-$-pull-¢ is now .order-£ - .col-¥-offset-$ is now .offset-¥-$
And .badge-default is now .badge-secondary in Bootstrap 4.
Required for Bootstrap 4.
- Set classes on the .progress-bar itself. - Backgrounds are now set with .bg-$ properties. - .active is now .progress-bar-animated.
- .divider is now .dropdown-divider - .dropdown-item is now required for all items - <span class=caret> is no longer necessary
In Bootstrap 4.
This class has been removed from Bootstrap 4. For simplicity & clarity, this commit wraps each <dt>~<dd> pair in a <div class=row> (which is allowed in HTML) and formats them as <dt class=col-5> and <dd class=col-7>.
This is required by Bootstrap 4.
Fix catalog modals
Fix admin dashboard facet modals
Starts work on the view type functionality issues.
Styles Masonry view option to match current expectation.
# Conflicts: # app/actors/hyrax/actors/initialize_workflow_actor.rb
|
this looks good to me! since it's green and |
no-reply
approved these changes
Jun 28, 2022
jeremyf
added a commit
to samvera/hyku
that referenced
this pull request
Dec 20, 2023
There are three major changes: 1. Favor setting `collection_type` attribute instead of `collection_type_gid` 2. Change `#collections?` to `#collections#any?` 3. Change CSS selector based on Bootstrap upgrade The above changes are related to work done in: - samvera/hyrax#5730 - samvera/hyrax#5742 - samvera/hyrax#4701 See: - samvera/hyrax@eb6e04e - samvera/hyrax@237c0c6 - samvera/hyrax@280664b
ShanaLMoore
added a commit
to samvera/hyku
that referenced
this pull request
Jan 5, 2024
* remove dogbiscuit crossover, fix routes * add spec for search history * add missing methods to avoid content block errors * Update Hyku Gemfile.lock * add option to support good job for background jobs instead of sidekiq * update gemfile lock * Update good_job.rb * merge * fix routes file, add missing js file * 💄 styling fix * 💄 rubocop fixes * remove iiif_print/iiif_print require cause of Sprockets::FileNotFound in Splash#index error. Doesn't seem necessary. * 🎁 🧹 add missing file and format with semicolons The previous build revealed that admin_color_select.js was missing. It also complained about missing semicolons. * 💄 correct missing semicolons appease the hound by formatting js file with semicolons. * 🧹 remove call to iiif_print/iiif_print Cause of build error. It's already being included in sass. * 💄 Rubocop fixes * ✅ Fix test setup for catalog_controller_spec This commit will add additional setup to the catalog_controller_spec. * Add knapsack helper * remove Adventist from application.rb * 🎁 Add conditional to run correct command for worker This commit adds a conditional to run the correct command for sidekiq or good_job, when running docker compose up. * Make appearance constants overrideable This allows for the knapsack to override the constants by defining and using a method rather than a constant in the look-ups. * add reporting fix to hyku ci * spec loading fixes * rubocop * 🧹Make appearance defaults overrideable * bump bulkrax to 5.4.0 This commit pulls in a small collection of bug fixes. * 🧹 Include knapsack css * fix job loading when selecting good job * adjust docker compose to use the startup script * 🎁 install tesseract eng_best * ♻️ revert tesseract best changes to dockerfile this change belongs in the knapsack directory instead * ♻️ revert tesseract best changes to dockerfile this change belongs in the knapsack directory instead * 🐛 Bring fix for entry show page not showing link This commit will bring in a fix from Bulkrax that correctly shows the object from the entry show page. ref: - samvera/bulkrax@0e68a5e * 🧹 Revert previous commit and update Bulkrax This commit will update Bulkrax to 5.4.1 instead of using the override from the last commit. We also revert the changes from the last commit. * 🐛 subject can't be blank for the contact form Previously there was a bug because even if you typed in a subject, the contact form would error saying that it was blank. Part of issue: - https://github.com/scientist-softserv/adventist-dl/issues/608 * mend * ♻️ Add handling for Knapsack theme overrides Prior to this commit, we were looking for themes yaml files relative to the directory of the spawning script. For Hyku that was always the `Rails.root` directory. However, when running specs in Knapsack, that directory was `Knapsack::Engine.root`. This unearthed a potential configuration issue; namely that we want Knapsack's to control what themes are available, meaning we don't want to require amending Hyku's themes. So, we introduce a mechanism for looking up files first in the Knapsack then in Hyku. I discovered this bug in the specs for knapsack (below is the *Error stack trace*) <details> <summary>Error stack trace</summary> ``` 2) Hyrax::Admin::AppearancesController with an administrator GET #show assigns the requested site as @site Failure/Error: get :show, params: {} Errno::ENOENT: No such file or directory @ rb_sysopen - config/home_themes.yml # /usr/local/bundle/gems/psych-3.3.4/lib/psych.rb:582:in `initialize' # /usr/local/bundle/gems/psych-3.3.4/lib/psych.rb:582:in `open' # /usr/local/bundle/gems/psych-3.3.4/lib/psych.rb:582:in `unsafe_load_file' # ./hyrax-webapp/app/controllers/hyrax/admin/appearances_controller.rb:19:in `show' # /usr/local/bundle/gems/rails-controller-testing-1.0.5/lib/rails/controller/testing/template_assertions.rb:62:in `process' # /usr/local/bundle/gems/devise-4.9.2/lib/devise/test/controller_helpers.rb:35:in `block in process' # /usr/local/bundle/gems/devise-4.9.2/lib/devise/test/controller_helpers.rb:104:in `catch' # /usr/local/bundle/gems/devise-4.9.2/lib/devise/test/controller_helpers.rb:104:in `_catch_warden' # /usr/local/bundle/gems/devise-4.9.2/lib/devise/test/controller_helpers.rb:35:in `process' # /usr/local/bundle/gems/rails-controller-testing-1.0.5/lib/rails/controller/testing/integration.rb:16:in `block (2 levels) in <module:Integration>' # ./spec/controllers/hyrax/hyrax/admin/appearances_controller_spec.rb:31:in `block (4 levels) in <top (required)>' # /usr/local/bundle/gems/webmock-3.19.1/lib/webmock/rspec.rb:39:in `block (2 levels) in <top (required)>' # ./hyrax-webapp/spec/support/multitenancy_metadata.rb:50:in `block (2 levels) in <top (required)>' # /usr/local/bundle/gems/rspec-retry-0.6.2/lib/rspec/retry.rb:124:in `block in run' # /usr/local/bundle/gems/rspec-retry-0.6.2/lib/rspec/retry.rb:110:in `loop' # /usr/local/bundle/gems/rspec-retry-0.6.2/lib/rspec/retry.rb:110:in `run' # /usr/local/bundle/gems/rspec-retry-0.6.2/lib/rspec_ext/rspec_ext.rb:12:in `run_with_retry' # /usr/local/bundle/gems/rspec-retry-0.6.2/lib/rspec/retry.rb:37:in `block (2 levels) in setup' # ./spec/spec_helper.rb:10:in `block (2 levels) in <top (required)>' ``` </details> Related to: - #2007 - #2008 The above two commits will require some reconciliation once this is incorporated. * ♻️ Favor Hyku::Application.path_for over Rails.root Given the existence of Knapsack we need to consider how overrides in Knapsack will take precedence over Hyku files. This change handles cases where we want to use the Knapsack's uploaded thumbnails. Related to: - #2010 * 🎁 Add highlight key to UV This commit allows for the `parent_query` to be highlighted in the UV so users won't have to do a catalog search and also a UV search. * 🐛 Mixin `HykuKnapsack::ApplicationHelper` This commit will mixin the `HykuKnapsack::ApplicationHelper` into the ApplicationHelper which will allow us to use #render_ocr_snippets for snippet highlighting. * Revert "🐛 Mixin `HykuKnapsack::ApplicationHelper`" This reverts commit ae093f1. * ♻️ Favor class_attribute over constant In Adventist, we're needing to override the constant's values. By making this a class_attribute we can more readily do the override via configuration instead of obliteration of a constant. * ♻️ Favor configurable html head title value Prior to this commit, we hard-coded the page title; this is something that should be far more configurable. And this refactor is a step towards that. This also allows for downstream implementors to not have to override the view simply to change the title element. * 🐛 Add custom rendering for license Prior to this commit, the License would render as a plain URL. With this change, we are now coercing the license into a URL that is labeled and titled with the name of the license. This is copied and modified based on [Rights show partial][1] Related to: - https://github.com/scientist-softserv/adventist-dl/issues/620 [1]: https://github.com/samvera/hyrax/blob/b334e186e77691d7da8ed59ff27f091be1c2a700/app/views/records/show_fields/_rights.html.erb * ♻️ Add option to override devise configuration For Adventist, we wanted to disable registration of accounts as this was creating a case where folks were creating their own accounts and tenants. Related to: - https://github.com/scientist-softserv/adventist-dl/issues/492 - https://github.com/scientist-softserv/adventist-dl/issues/618 - #1964 - scientist-softserv/adventist-dl#493 * run asset build later in process to allow knapsack to run it only one time * 🐛 Fix Add to Collection for page 2+ of works Prior to this commit, when you were on page 2 of your works and selected a work to add to a collection, the query for available collections would use the page 2 as part of the collection query. This would mean the first 100 collections (default page size) that you had access to add works to were skipped. With this commit, we omit the query parameters from the works page and then query collections. Related to: - samvera/hyrax#5972 - samvera/hyrax#5969 - https://github.com/scientist-softserv/adventist-dl/issues/625 Co-authored-by: LaRita Robinson <[email protected]> * test that invited users are added to the registered group * Add invited users to the registered group Fixes a bug where users who were invited with no roles would not show up in the users list at all * 🐛 Change Hyky to Hyku (#2029) Typo caused inability to upload collection thumbnail. * 🎁 Modify labels in UV for V3 manifests This commit will add the same treatment as we have for V2 manifests to V3 manifests. This will allow the UV to add a more human readable label to the pages. Ref: - https://github.com/scientist-softserv/adventist-dl/issues/628 * 🐛 Fix bad method name Related to: - https://github.com/samvera/hyku/pull/2023/files - scientist-softserv/atla-hyku#198 * 🐛 Move some methods to be public This commit will move #solr_document, #current_ability, and #request to be public methods. Since these methods in Hyrax were not private, in the decorator it should not be private either. Ref: - https://github.com/samvera/hyrax/blob/b334e186e77691d7da8ed59ff27f091be1c2a700/app/presenters/hyrax/file_set_presenter.rb#L10 * First attempt for upgrade to Hyrax 5.0.0.rc2 So far the changes throw an error `The adapter `nulldb_adapter` is not yet supported` when doing a `docker compose build`. Commenting out `RUN RAILS_ENV=production SECRET_KEY_BASE=`bin/rake secret` DB_ADAPTER=nulldb DB_URL='postgresql://fake' bundle exec rake assets:precompile && yarn install` in the Dockerfile allows the build to complete but still can't boot yet. * 🧹 Get assets to precompile This commit has a lot in it, but of note: - We forked apartment gem to expand activerecord version support - Used the Hyrax upgrade guide to update assets - Replaced bootstrap 3 variables with hard coded values - Commented out blacklight_helper_behavior.rb because Blacklight 7 removed it, we'll have to figure out how to get the same functionality in the new version * 🧹 Switch to Hyrax `double_combo` branch We are using this branch on Hyrax because it has quite a few Valkyrie related fixes in it. * 🧹 use class attribute instead of constant to correct failing specs * Fix specs * 🧹 Get the page to load This commit will get the proprietor page to load. You can create a tenant and vist it as well. * ♻️ Introduce Hyku::Application.theme_view_path_roots With the introduction of [HykuKnapsack][1], we are adjusting how we create instances of Hyku. Namely we don't clone Hyku but instead we incorporate Hyku as a submodule into a Knapsack. The Knapsack is a Rails engine that is mounted in the Hyku application. What this means is that when we want to Prior to this commit, the only way to adjust themed views would have been to add them to the Rails application (e.g. Hyku) directly. Which would work in a non-Knapsack ecosystem. However, with Knapsack we need a means of saying "Hey, for themes we want to be able to add/adjust views within the knapsack." Hence this change. [1]: https://github.com/samvera-labs/hyku_knapsack * 🧹 Prepping for rubocop This commit will change the Docker image to rc1 because rc2 stopped working (at least locally). Also getting things ready to run rubocop. * 🧹 Ran `bundle exec rubocop -a` * 🧹 Autocorrect frozen string literals ```sh rubocop --only Style/FrozenStringLiteralComment -A ``` * 🧹 Rubocop'd lengths and other low hanging fruit Various length metrics were disabled in this commit. Also other various cops that were easy to fix. * 🧹 Remove deprecated Blacklight code removing the deprecated blacklight code allows the specs to run. We should consider if finding a replacement is necessary in the following ticket: - scientist-softserv/hykuup_knapsack#54 Issue: - scientist-softserv/hykuup_knapsack#35 * 🧹 Avoid `#present?` in non-Rails situations Rails provides [`Object#present?`][1], which is a method that is not generally available in Ruby. However in the changed context, the scripts do not have access to Rails methods. By using this adjusted approach we favor baseline Ruby methods. [1]: https://api.rubyonrails.org/classes/Object.html#method-i-present-3F * 🧹 Get Homepage Controller specs passing (#2058) Refactor homepage controller to more closely align with Hyrax's homepage controller. Adjust theme views to render `modal` instead of `ajax_modal`. refs: scientist-softserv/hykuup_knapsack#56 * ♻️ Replace Homepage Presenter with decorator (#2059) * 🧹Get CatalogController specs working (#2060) * 🧹 Hyrax 5 get additional specs passing (#2062) * 🧹 Get chrome.hyku.test working * 🧹 Get SitesControllerSpecs working File fixtures were broken. Ref scientist-softserv/hykuup_knapsack#56 * 🧹 Remove google analytics from config reload This is a piece of a fix for analytics that came in via scientist-softserv/palni-palci#946 Additional backporting of analytics work is still needed, but this fixes numerous specs so it is being pulled in earlier. * 🧹 Update ruby version for circleci * 🧹 Update rails version for circleci * 🧹Database migration & schema update (#2063) For table hyrax_counter_metrics * 🧹 Fix Hyrax 5 remaining controller spec failures (#2064) * 🧹Remove ActiveFedora monkeypatch * 🧹Fix file fixture * 🧹 Upgrade views from Bootstrap 3 to 4 This commit is a first swing of upgrading all the views from Bootstrap 3 to 4. There's still a lot of work to be done to make the views look good but this is a good first step. * Hyrax 5 upgrade rubocop fixes & get specs running in CI (#2065) * 🧹Rubocop Fixes * Attempt to fix circleci * 🧹 Fix CollapsableSectionPresenter override The override was causing issues not passing the nav-link class into the anchor tags. This fix specifically passes the title attribute in vs the previous implementation of trying to pass all html options in. * 🧹 Remove required translations from locales This commit will remove the override for the `required` translations since it changed to a badge badge-style in Bootstrap 4. This is accounted for in Hyrax so we can fall back to that. * 🐛 Fix some javascript errors This commit will fix a few javascript errors, at least enough to get the the bootstrap javascript to work correctly. We're still getting a the almond-rails js error but that seems to exist in previous Hyku as well. * Hyrax 5 upgrade rubocop fixes & get specs running in CI (#2065) * 🧹Rubocop Fixes * Attempt to fix circleci * 🧹 Post review adjustments These are adjustments made after the PR has been reviewed. * 🧹 Clean up a couple blacklight views This commit will account for the new versions of Blacklight and Blacklight Gallery. The masonry view no longer exists so we can't tell how it's broken as of right now. I'm sure we'll run into it during our testing. NOTE: These changes refer to the shared search tenant. * 🧹 Bring back `BlacklightHelperBehavior` This commit will bring back the `BlacklightHelperBehavior` module but it will be namespaced under `Hyku` to avoid conflicts. We will then include it in the `HyraxHelper` module so those methods should override the ones in `Blacklight::BlacklightHelperBehavior`. * 🧹 Hyrax 5 upgrade additional specs (#2067) * 🧹 More spec & controller fixes Ref scientist-softserv/hykuup_knapsack#55 - Contact form controller and pages controller duplicate some of the homepage controller behavior, so corresponding fixes are needed. - Update collections factory and collection_ability_spec to match hyrax and stop calling `.gid` on a collection_type. - Adjust permission_template_form_spec to adjust for removal of method `reset_access_controls!` and add a few new expectations instead. * 🧹 Begin work on Roles Service Working with Permission Templates has changed, requiring an adjustment to both logic and specs. * 🧹 Solr Document Ability Spec * Rubocop fixes * Fix typo of collection variable * Reinstate some collections factory overrides * Revert Rubocop changes Caused spec failure in roles_service_spec. * Fix create_default_admin_set_job_spec * Restore mistakenly removed capta use * 🧹 Stanford import specs We have plans to remove the Stanford import logic, but for now, this handles the specs that were failing, in an attempt to get CI to pass. * Make Rubocop happy * Fix typo * Update Hyrax to pull in most recent changes * More spec fixes Menu presenter: removed html_options Application Helper: override for missing_translations now receives `false` when translation wasn't found rather than a string. * Fix missing translation logic * Fix missing_translation override Simplify and fix override. A missing translation now returns `false` instead of the text `translation missing`. The super method requires the `option` parameter, so we opted to keep the override. * 🧹 Remove copied code The overrides are no longer necessary. In reviewing the diff between what I'm removing and what is in the `double_combo` branch; the major change was adding an operator for the `reduce` function. The breaking problem was that the method signature of one of the copied methods has changed in Hyrax 5.0. The removal considers that Hyrax::Group is of two different classes: - In Hyrax, it is a plain old Ruby object - In Hyku, it is descended from ActiveRecord::Base The two classes have different instantiation parameters. Hence the introduction of `Hyrax::Group.new` in this code. * 🧹 Fix missing method name * 🐛 Ensure :maxFileSize is integer Prior to this commit, we were casting the value to string. However Hyrax attempts to do division on that string. See https://github.com/samvera/hyrax/blob/b7891b758411c59f71ff54212e0d250fcc47e35f/app/views/hyrax/base/_form_files.html.erb#L6-L15 * Skip taking a picture on failure * 🧹 Fix issue regarding Valkyrie::Identifier The encountered error was: ``` NoMethodError: undefined method `split' for #<Valkyrie::ID:0x0000ffffa5f04bc8 @id="admin_set/default"> ``` * 🧹 Favor Sipity::Entity function over to_sipity_entity The Sipity conversion methods are now explicit functions (much like the `Array()` function). - https://github.com/samvera/hyrax/blob/5aaa568d348a180add2a1337d9d794b740703df8/app/models/sipity.rb#L20 * Update Hyrax IIIF AV gem * 🧹 Review controller overrides Many of the controllers just needed to be updated with the decorator pattern. We're creating a new concern for all the Hyku specific overrides in Hyku::WorksControllerBehavior. This has to be included in the Controller classes after Hyrax::WorksControllerBehavior to override the relevant methods. * clean up from pr review * Appease rubocop * Update IIIF Print gem * 🤖 Specify Cache Root Prior to this commit, we were seeing the following failure: > Failure/Error: Site.application\_name || super > > ActionView::Template::Error: > Permission denied @ dir\_s\_mkdir - /app The `Account#setup_tenant_cache` sets the cache\_store to be `ENV.fetch('HYKU_CACHE_ROOT', '/app/samvera/file_cache')`. When I locally chanced it to `/blorg/samvera/file_cache` I could repeat the error. With this commit, we're setting the cache value for the CircleCI run. Why was it previously working? Perhaps because `Account#setup_tenant_cache` never got called due to other configurations? There is a guard clause around the method call. * 🧹 Update spec to reflect AdminSet default behavior In the following commit, we removed the deprecated `AdminSet.find_or_create_default_admin_set_id`: - samvera/hyrax@863c4bc This commit follows the advice of the deprecation warning and now favors the `Hyrax::AdminSetCreateService.find_or_create_default_admin_set.id` method call. Related to: - samvera/hyrax#6203 * Remove obsolete site roles and routes (#2080) The site/roles route is obsolete. This is an attempt to remove as much of the obsolete logic as possible, as it has been replaced by the groups with roles feature. * Remove stanford importer Importer was deprecated in prior release version. * 🤖 Fix spec/features/collection_type_spec.rb There are three major changes: 1. Favor setting `collection_type` attribute instead of `collection_type_gid` 2. Change `#collections?` to `#collections#any?` 3. Change CSS selector based on Bootstrap upgrade The above changes are related to work done in: - samvera/hyrax#5730 - samvera/hyrax#5742 - samvera/hyrax#4701 See: - samvera/hyrax@eb6e04e - samvera/hyrax@237c0c6 - samvera/hyrax@280664b * 🤖 Fix stub methods to pass tests These tests weren't verifying that we could reach Redis; they were testing the interface of the `RedisEndpoint#ping` by mocking the instance. This commit changes the mocking by avoiding a call to `Hyrax::RedisEventStore.instance` which was raising a Redis connection error. Again, this test is not is redis connecting but "assume we are trying to connect to redis now demonstrate ping." * Lock chromedriver version (#2086) Refs CircleCI-Public/browser-tools-orb#96 CircleCI-Public/browser-tools-orb#75 (comment) * 🧹 Clean up model overrides Most of what's in this commit is just updating the Hyrax version in the override comments. There was also an opportunity to switch the `ContactForm` model to a decorator. * 🤖 Favor general spec over specific With the CircleCI alternate place for the file_store cache, we need to fallback to a more general test assertion. * 🤖 Bring over Hyrax spec changes * 🤖 Extract constant to ease testing We're not concerned with where the cached file is for testing purposes; so instead of hard-coding a value that can change in the ENV, let's compare the constant that we use in the code. tl;dr - Don't rely on magic strings * 🤖 Re-arrange CleanupAccountJob specs The `CleanupAccountJob` was stubbing very nosily; needing to know too much about implementation details of the end-points. Instead this preserves the over-view spec (e.g. what all the cleanup spec actually cleans up) while moving that nosy logic to the constituent endpoint. Most of these specs are testing that the method chains work; which is perhaps adequate as the other option is far more expensive tests (e.g. make a new Fedora node only to then immediately destroy it) I'm also leveraging the new `Redis::Namespace#clear` method. Related to: - resque/redis-namespace#202 * 🧹 Restore btn-sign-up on splash page This change was part of the bulk upgrade of Bootstrap 3 to 4. * 🧹 Fix `./spec/requests/admin_dashboard_spec.rb` spec Prior to this commit, the specs failed because of the introduction of the WorkflowResponsibilityFormDecorator. The decorator extracted prior logic from Hyrax::Admin::WorkflowRolesController. In copying that logic we introduced a subtle bug. Namely, we favored the original `.new` behavior if and only if you provided a `:user_id`. This broke places where we instantiated the form in a view (e.g. `./app/views/hyrax/admin/workflow_roles/index.html.erb`). With this change, we make the behavior of `.new` fail towards its "normal" implementation and instead rely on the presence of an attribute to switch to a different form instantatior. See Commit: - 095edca Related to: - #2079 Co-authored-by: LaRita Robinson <[email protected]> Co-authored-by: Kirk Wang <[email protected]> * 🎁 Upgrade Redis initializer to Hyrax 5's gen version Prior to this commit, when looking at the `Hyrax::RedisEventStore.instance` we saw it's connection information as: `#<Redis client v4.8.1 for redis://localhost:6379/0>` We were expecting the connection to be the following: `#<Redis client v4.8.1 for redis://redis:6379/0>` What we were seeing in tests is when we hit the redis connection we were getting an error about not being able to connect to 127.0.0.1:6379 (e.g. localhost). With this commit, we have a clear connection to Redis. See Redis Config initializer: - https://github.com/samvera/hyrax/blob/966951ffaa72524e4a775f8a198bd51a47ece7d9/lib/generators/hyrax/templates/config/initializers/redis_config.rb#L1-L10 Co-authored-by: Kirk Wang <[email protected]> * 🧹 Clean up actors Just found one actor that was overriding Hyrax. This commit will switch it to a decorator. * 🐛 Handle missing labels Adjust paths and keys to look for labels. * Appease the cops * 🧹 Assigning collection_type The partials rendered in the tested view assume that we've set a collection type. * Appease rubocop * Fixing nav link selectors to new structure * Fixing nav link selectors to new structure * 🧹 Clean up forms The only big thing in this commit is the appearance_decorator. I've added to the spec to show that the decorator should be working as intended. * 🧹 Fix spec based on HTML class changes * 🧹 Narrow specificity of CSS selector The selector was *very* specific, and with the HTML class changes for Bootstrap 3 to 4, this almost certainly broke. Note, there are still underlying issues with two other specs; there errors are listed below: ``` 1) Admin can select home page theme when a search results theme is selected updates the search results page with the selected layout view Failure/Error: super ActionView::Template::Error: undefined method `with_collection' for nil:NilClass ``` * 🧹 Remove specificity of CSS selectors in test The hyper specific selectors are not durable for CSS framework upgrades. * 🐛 Adding document_component to blacklight's config Blacklight 7.35.0 's default document_component is `nil`, see: - https://github.com/projectblacklight/blacklight/blob/ac5fa8b300c5ad5c35b1663ef0f15372ffa2be0f/lib/blacklight/configuration.rb#L213 - https://github.com/projectblacklight/blacklight/blob/ac5fa8b300c5ad5c35b1663ef0f15372ffa2be0f/lib/blacklight/configuration.rb#L186 Digging around in the wiki, you might find (only found because I cloned the repo): - https://github.com/projectblacklight/blacklight/wiki/Configuration---Results-View Related to: - projectblacklight/blacklight#2317 * 🧹 Allow :clean or :clean_repo to work for the cleaners Hyrax has :clean_repo and Hyku has :clean Sometimes folks copy over specs from Hyrax, and bring along the :clean_repo; which looks like it should work. With this commit, we bring that logic along! * 🧹 Remove skip CI Perhaps it's flappy; but let's see. * 🧹 Fix button class for Bootstrap 3 to 4 * 🧹 Favor Layout/LineLength over Metrics/LineLength Rubocop seams to prefer the Layout namespace for LineLength. * 🧹 The selector is not working Checking the HTML (on the CircleCI SSH environment), it appears that the selector should work in test. But it is not. So I'm removing the specificity. * Cleaning a spec that should start clean * 🧹 Ensure feature specs run clean Prior to this commit, we did not automatically clean the features. The below ripgrep (and output) shows that there were some features which did not start from a clean state. ``` rg "(clean|clean_repo):" spec/features --files-without-match `` ``` spec/features/accounts_spec.rb spec/features/proprietor_spec.rb spec/features/featured_collections_spec.rb spec/features/user_roles_spec.rb spec/features/oai_pmh_spec.rb ``` * Stab at trying to find a problem * 🧹 Clean up services This commit will reconcile the services that are overrides for Hyrax with the Hyrax 5.0.0rc2 version. There were a number of overrides that were changed to the decorator pattern. * Moving rescue and documenting the why * 🧹 Rearrange order of filter chain This is not tested in the UI, but the `show_works_or_works_that_contain_files` remains after the troublesome advanced query filters. * 🧹 Address PR comments This commit addresses comments from the review but one thing that is of note is loading the I18n translations in the application.rb file. We needed this because our decorators load prior to I18n loads the locales in our config/locales directory for them to use so we were getting missing translations. * 🧹 Attempting to find and squash bug * ♻️ Account for observed customizations Dear reviewer, put on your reading glasses. This commit looks at the newly refactored `Hyrax::IiifAv::DisplaysContentDecorator` as well as the current state of [PALS's Hyrax::IiifAv::DisplaysContentDecorator][1] and attempts to account for the variances between the two by introducing configurations. Yes, we could port this to the hyrax-iiif_av gem, but for now that would not solve the underlying issue of how we've been handling things. Why the Hyku::Application class attribute? Because the decorator is being mixed into a module, which does not response to `.class_attribute` methods. [1]: https://github.com/scientist-softserv/palni-palci/blob/8754556c0225ce9f04674c1ffac6403586fd65f4/app/presenters/concerns/hyrax/iiif_av/displays_content_decorator.rb * 🧹 Clean up other overrides This commit is aiming to clean up the rest of the found overrides. * 🧹 Change locale file load order so that our local files are prioritized We add our local config locale directory to the I18n.load_path so that our local files take precendence over the ones found in our gems. Related issue: - scientist-softserv/hykuup_knapsack#55 * 🧹 Update IIIF Print and AV gems We were not seeing images loading correctly in the UV because we introduced the `Hyku::WorksControllerBehavior` and IIIF Print did not know about it. - scientist-softserv/iiif_print@cad2cf3 We were seeing a respon to mismatch error in the Hyrax IIIF AV. - samvera-labs/hyrax-iiif_av@4723b8f Also, the image that I tested was a phone image that apparently had different ExifImageHeight/ExifImageWidth values than the ImageHeight/ImageWidth values. This was probably because modern phones typically generate multiple images so the user can choose the best shot. The exiftool_image_to_fits.xslt was proritizing the Exif values over the regular values and would cause our image characterization to have weird height and width values. The change in this PR prioritizes the regular over the Exif values. Ref: - scientist-softserv/hykuup_knapsack#68 * 🐛 Fix video thumbnail generation In a previous commit we created the `Hyrax::FileSetDerivativesServiceDecorator` to override the default thumbnails that Hyrax uses but I forgot to add the video thumbnail, which is fixed here. Ref - scientist-softserv/hykuup_knapsack#69 * 🧹 Add space between thumbnail and title * 🧹 Update Hyku version This commit bumps the hyku version from 5.1.0 to 6.0.0. * 💄 ruboco fix * 🧹 Fixing a few styles This commit will change the maximized size to match Bootstrap 4 break points. Also, added btn-secondary to hyku.css so it doesn't get overriden by appearance styles. Finally, restructured the homepage to make it look more like Hyrax 5. * sort properties * adjust screen size * 🧹 Update `rails` to `6-1-stable` for GoodJob There is a compatibility issue with Rails 6.1.7.6 and Ruby 3.2 that was affecting GoodJob. There was a backport to the 6-1-stable branch that fixes this issue. See: - rails/rails#46895 Ref: - scientist-softserv/hykuup_knapsack#67 * 🎁 only add Good Job classes if it's enabled ref: - #2047 (comment) * ♻️ Removing file in favor of comments found in docker-compose.yml Remove file in favor of comments found on lines #138 - 139, which uses the sleep infinity command to accomplish the same thing. ref: - https://devopscube.com/keep-docker-container-running/ * 🧹 Remove disabling of Rubocop Naming/PredicateName (#2126) This cop was originally disabled in order to get specs to run during CI without code changes. Now that specs are running, the changes can be safely made to appease rubocop rather than disabling it. * 🎁 Add Hyrax version in the footer Often we forget what version of Hyrax we're running so this should help. --------- Co-authored-by: Rob Kaufman <[email protected]> Co-authored-by: Shana Moore <[email protected]> Co-authored-by: LaRita Robinson <[email protected]> Co-authored-by: Jeremy Friesen <[email protected]> Co-authored-by: Benjamin Kiah Stroud <[email protected]> Co-authored-by: LaRita Robinson <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Fixes #3271 #5276 #4016
Migrates Hyrax to use new major versions of Blacklight, Bootstrap and Rails. These all need to be upgraded together and involve significant changes to the Hyrax codebase. There will be a Hyrax 4.0 beta release once this PR is merged.
Highlights: