Add DTS for Fujitsu M532 (chagall) #3

cunidev · 2020-03-09T10:55:08Z

Still WiP, although several things (USB, LCD panel, backlight, keys) already work. Forked from the Asus TF300T DTS

Downstream kernel of ASUS TF300T sets r0 to #3. Unfortunately there is no explanation in downstream code whether this is really needed. Some of T30 downstream kernels have and explicit comment that all arguments are ignored by firmware. Let's take the safe side and replicate behaviour of the TF300T downstream kernel. Tested-by: Peter Geis <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]>

swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Qian Cai <[email protected]> Cc: Marco Elver <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

Downstream kernel of ASUS TF300T sets r0 to #3. There is no explanation in downstream code whether this is really needed and some of T30 downstream kernels have and explicit comment telling that all arguments are ignored by firmware. Let's take a safe side by replicating behavior of the TF300T downstream kernel. This change works fine on Ouya and Nexus 7 devices. Tested-by: Michał Mirosław <[email protected]> Tested-by: Jasper Korten <[email protected]> Tested-by: David Heidelberg <[email protected]> Tested-by: Peter Geis <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]>

…f fs_info::journal_info [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ grate-driver#48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ grate-driver#48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: [email protected] # 4.4+ Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Qian Cai <[email protected]> Cc: Marco Elver <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

Downstream kernel of ASUS TF300T sets r0 to #3. There is no explanation in downstream code whether this is really needed and some of T30 downstream kernels have and explicit comment telling that all arguments are ignored by firmware. Let's take a safe side by replicating behavior of the TF300T downstream kernel. This change works fine on Ouya and Nexus 7 devices. Tested-by: Michał Mirosław <[email protected]> Tested-by: Jasper Korten <[email protected]> Tested-by: David Heidelberg <[email protected]> Tested-by: Peter Geis <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]>

Huazhong Tan says: ==================== net: hns3: misc updates for -next This patchset includes some misc updates for the HNS3 ethernet driver. #1 & #2 add two cleanups. #3 provides an interface for the client to query the CMDQ's status. #4 adds a little optimization about debugfs. #5 prevents 1000M auto-negotiation off setting. ==================== Signed-off-by: Jakub Kicinski <[email protected]>

swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Qian Cai <[email protected]> Cc: Marco Elver <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

When we increase hardware queue count, blk_mq_update_queue_map will reset the mapping between cpu and hardware queue base on the hardware queue count(set->nr_hw_queues). The mapping cannot be reset if it encounters error in blk_mq_realloc_hw_ctxs, but the fallback flow will continue using it, then blk_mq_map_swqueue will touch a invalid memory, because the mapping points to a wrong hctx. blktest block/030: null_blk: module loaded Increasing nr_hw_queues to 8 fails, fallback to 1 ================================================================== BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x2f2/0x830 Read of size 8 at addr 0000000000000128 by task nproc/8541 CPU: 5 PID: 8541 Comm: nproc Not tainted 5.7.0-rc4-dbg+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack+0xa5/0xe6 __kasan_report.cold+0x65/0xbb kasan_report+0x45/0x60 check_memory_region+0x15e/0x1c0 __kasan_check_read+0x15/0x20 blk_mq_map_swqueue+0x2f2/0x830 __blk_mq_update_nr_hw_queues+0x3df/0x690 blk_mq_update_nr_hw_queues+0x32/0x50 nullb_device_submit_queues_store+0xde/0x160 [null_blk] configfs_write_file+0x1c4/0x250 [configfs] __vfs_write+0x4c/0x90 vfs_write+0x14b/0x2d0 ksys_write+0xdd/0x180 __x64_sys_write+0x47/0x50 do_syscall_64+0x6f/0x310 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Signed-off-by: Weiping Zhang <[email protected]> Tested-by: Bart van Assche <[email protected]> Signed-off-by: Jens Axboe <[email protected]>

We need to check mddev->del_work before flush workqueu since the purpose of flush is to ensure the previous md is disappeared. Otherwise the similar deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the bdev->bd_mutex before flush workqueue. kernel: [ 154.522645] ====================================================== kernel: [ 154.522647] WARNING: possible circular locking dependency detected kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default grate-driver#25 Tainted: G O kernel: [ 154.522651] ------------------------------------------------------ kernel: [ 154.522653] mdadm/2482 is trying to acquire lock: kernel: [ 154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0 kernel: [ 154.522673] kernel: [ 154.522673] but task is already holding lock: kernel: [ 154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522691] kernel: [ 154.522691] which lock already depends on the new lock. kernel: [ 154.522691] kernel: [ 154.522694] kernel: [ 154.522694] the existing dependency chain (in reverse order) is: kernel: [ 154.522696] kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}: kernel: [ 154.522704] __mutex_lock+0x87/0x950 kernel: [ 154.522706] __blkdev_get+0x79/0x590 kernel: [ 154.522708] blkdev_get+0x65/0x140 kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40 kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod] kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod] kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod] kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522735] vfs_write+0xad/0x1a0 kernel: [ 154.522737] ksys_write+0xa4/0xe0 kernel: [ 154.522745] do_syscall_64+0x64/0x2b0 kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522749] kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}: kernel: [ 154.522752] __mutex_lock+0x87/0x950 kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod] kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522763] vfs_write+0xad/0x1a0 kernel: [ 154.522765] ksys_write+0xa4/0xe0 kernel: [ 154.522767] do_syscall_64+0x64/0x2b0 kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522770] kernel: [ 154.522770] -> #2 (kn->count#253){++++}: kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0 kernel: [ 154.522778] kernfs_remove+0x1f/0x30 kernel: [ 154.522780] kobject_del+0x28/0x60 kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod] kernel: [ 154.522786] process_one_work+0x2a7/0x5f0 kernel: [ 154.522788] worker_thread+0x2d/0x3d0 kernel: [ 154.522793] kthread+0x117/0x130 kernel: [ 154.522795] ret_from_fork+0x3a/0x50 kernel: [ 154.522796] kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}: kernel: [ 154.522800] process_one_work+0x27e/0x5f0 kernel: [ 154.522802] worker_thread+0x2d/0x3d0 kernel: [ 154.522804] kthread+0x117/0x130 kernel: [ 154.522806] ret_from_fork+0x3a/0x50 kernel: [ 154.522807] kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}: kernel: [ 154.522813] __lock_acquire+0x1392/0x1690 kernel: [ 154.522816] lock_acquire+0xb4/0x1a0 kernel: [ 154.522818] flush_workqueue+0xab/0x4b0 kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522823] __blkdev_get+0xea/0x590 kernel: [ 154.522825] blkdev_get+0x65/0x140 kernel: [ 154.522828] do_dentry_open+0x1d1/0x380 kernel: [ 154.522831] path_openat+0x567/0xcc0 kernel: [ 154.522834] do_filp_open+0x9b/0x110 kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522838] do_sys_open+0x57/0x80 kernel: [ 154.522840] do_syscall_64+0x64/0x2b0 kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522844] kernel: [ 154.522844] other info that might help us debug this: kernel: [ 154.522844] kernel: [ 154.522846] Chain exists of: kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex kernel: [ 154.522846] kernel: [ 154.522850] Possible unsafe locking scenario: kernel: [ 154.522850] kernel: [ 154.522852] CPU0 CPU1 kernel: [ 154.522853] ---- ---- kernel: [ 154.522854] lock(&bdev->bd_mutex); kernel: [ 154.522856] lock(&mddev->reconfig_mutex); kernel: [ 154.522858] lock(&bdev->bd_mutex); kernel: [ 154.522860] lock((wq_completion)md_misc); kernel: [ 154.522861] kernel: [ 154.522861] *** DEADLOCK *** kernel: [ 154.522861] kernel: [ 154.522864] 1 lock held by mdadm/2482: kernel: [ 154.522865] #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522868] kernel: [ 154.522868] stack backtrace: kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default grate-driver#25 kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 kernel: [ 154.522878] Call Trace: kernel: [ 154.522881] dump_stack+0x8f/0xcb kernel: [ 154.522884] check_noncircular+0x194/0x1b0 kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690 kernel: [ 154.522890] __lock_acquire+0x1392/0x1690 kernel: [ 154.522893] lock_acquire+0xb4/0x1a0 kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522898] flush_workqueue+0xab/0x4b0 kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522910] __blkdev_get+0xea/0x590 kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522914] blkdev_get+0x65/0x140 kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522918] do_dentry_open+0x1d1/0x380 kernel: [ 154.522921] path_openat+0x567/0xcc0 kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690 kernel: [ 154.522926] do_filp_open+0x9b/0x110 kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0 kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630 kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0 kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522944] do_sys_open+0x57/0x80 kernel: [ 154.522946] do_syscall_64+0x64/0x2b0 kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae And md_alloc also flushed the same workqueue, but the thing is different here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and the flush is necessary to avoid race condition, so leave it as it is. Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Song Liu <[email protected]>

Andrii Nakryiko says: ==================== Add generic benchmark runner framework which simplifies writing various performance benchmarks in a consistent fashion. This framework will be used in follow up patches to test performance of perf buffer and ring buffer as well. Patch #1 extracts parse_num_list to be re-used between test_progs and bench. Patch #2 adds generic runner implementation and atomic counter benchmarks to validate benchmark runner's behavior. Patch #3 implements test_overhead benchmark as part of bench runner. It also add fmod_ret BPF program type to a set of benchmarks. Patch #4 tests faster alternatives to set_task_comm() approach, tested in test_overhead, in search for minimal-overhead way to trigger BPF program execution from user-space on demand. v2->v3: - added --prod-affinity and --cons-affinity (Yonghong); - removed ringbuf-related options leftovers (Yonghong); - added more benchmarking results for test_overhead performance discrepancies; v1->v2: - moved benchmarks into benchs/ subdir (John); - added benchmark "suite" scripts (John); - few small clean ups, change defaults, etc. ==================== Signed-off-by: Alexei Starovoitov <[email protected]>

swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Qian Cai <[email protected]> Cc: Marco Elver <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

This BUG halt was reported a while back, but the patch somehow got missed: PID: 2879 TASK: c16adaa0 CPU: 1 COMMAND: "sctpn" #0 [f418dd28] crash_kexec at c04a7d8c #1 [f418dd7c] oops_end at c0863e02 #2 [f418dd90] do_invalid_op at c040aaca #3 [f418de28] error_code (via invalid_op) at c08631a5 EAX: f34baac0 EBX: 00000090 ECX: f418deb0 EDX: f5542950 EBP: 00000000 DS: 007b ESI: f34ba800 ES: 007b EDI: f418dea0 GS: 00e0 CS: 0060 EIP: c046fa5e ERR: ffffffff EFLAGS: 00010286 #4 [f418de5c] add_timer at c046fa5e #5 [f418de68] sctp_do_sm at f8db8c77 [sctp] #6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp] #7 [f418df48] inet_shutdown at c080baf9 #8 [f418df5c] sys_shutdown at c079eedf grate-driver#9 [f418df70] sys_socketcall at c079fe88 EAX: ffffffda EBX: 0000000d ECX: bfceea90 EDX: 0937af98 DS: 007b ESI: 0000000c ES: 007b EDI: b7150ae4 SS: 007b ESP: bfceea7c EBP: bfceeaa8 GS: 0033 CS: 0073 EIP: b775c424 ERR: 00000066 EFLAGS: 00000282 It appears that the side effect that starts the shutdown timer was processed multiple times, which can happen as multiple paths can trigger it. This of course leads to the BUG halt in add_timer getting called. Fix seems pretty straightforward, just check before the timer is added if its already been started. If it has mod the timer instead to min(current expiration, new expiration) Its been tested but not confirmed to fix the problem, as the issue has only occured in production environments where test kernels are enjoined from being installed. It appears to be a sane fix to me though. Also, recentely, Jere found a reproducer posted on list to confirm that this resolves the issues Signed-off-by: Neil Horman <[email protected]> CC: Vlad Yasevich <[email protected]> CC: "David S. Miller" <[email protected]> CC: [email protected] CC: [email protected] CC: [email protected] Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>

swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Qian Cai <[email protected]> Cc: Marco Elver <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

The reclaim code that balances between swapping and cache reclaim tries to predict likely reuse based on in-memory reference patterns alone. This works in many cases, but when it fails it cannot detect when the cache is thrashing pathologically, or when we're in the middle of a swap storm. The high seek cost of rotational drives under which the algorithm evolved also meant that mistakes could quickly result in lockups from too aggressive swapping (which is predominantly random IO). As a result, the balancing code has been tuned over time to a point where it mostly goes for page cache and defers swapping until the VM is under significant memory pressure. The resulting strategy doesn't make optimal caching decisions - where optimal is the least amount of IO required to execute the workload. The proliferation of fast random IO devices such as SSDs, in-memory compression such as zswap, and persistent memory technologies on the horizon, has made this undesirable behavior very noticable: Even in the presence of large amounts of cold anonymous memory and a capable swap device, the VM refuses to even seriously scan these pages, and can leave the page cache thrashing needlessly. This series sets out to address this. Since commit ("a528910e12ec mm: thrash detection-based file cache sizing") we have exact tracking of refault IO - the ultimate cost of reclaiming the wrong pages. This allows us to use an IO cost based balancing model that is more aggressive about scanning anonymous memory when the cache is thrashing, while being able to avoid unnecessary swap storms. These patches base the LRU balance on the rate of refaults on each list, times the relative IO cost between swap device and filesystem (swappiness), in order to optimize reclaim for least IO cost incurred. History I floated these changes in 2016. At the time they were incomplete and full of workarounds due to a lack of infrastructure in the reclaim code: We didn't have PageWorkingset, we didn't have hierarchical cgroup statistics, and problems with the cgroup swap controller. As swapping wasn't too high a priority then, the patches stalled out. With all dependencies in place now, here we are again with much cleaner, feature-complete patches. I kept the acks for patches that stayed materially the same :-) Below is a series of test results that demonstrate certain problematic behavior of the current code, as well as showcase the new code's more predictable and appropriate balancing decisions. Test #1: No convergence This test shows an edge case where the VM currently doesn't converge at all on a new file workingset with a stale anon/tmpfs set. The test sets up a cold anon set the size of 3/4 RAM, then tries to establish a new file set half the size of RAM (flat access pattern). The vanilla kernel refuses to even scan anon pages and never converges. The file set is perpetually served from the filesystem. The first test kernel is with the series up to the workingset patch applied. This allows thrashing page cache to challenge the anonymous workingset. The VM then scans the lists based on the current scanned/rotated balancing algorithm. It converges on a stable state where all cold anon pages are pushed out and the fileset is served entirely from cache: noconverge/5.7-rc5-mm noconverge/5.7-rc5-mm-workingset Scanned 417719308.00 ( +0.00%) 64091155.00 ( -84.66%) Reclaimed 417711094.00 ( +0.00%) 61640308.00 ( -85.24%) Reclaim efficiency % 100.00 ( +0.00%) 96.18 ( -3.78%) Scanned file 417719308.00 ( +0.00%) 59211118.00 ( -85.83%) Scanned anon 0.00 ( +0.00%) 4880037.00 ( ) Swapouts 0.00 ( +0.00%) 2439957.00 ( ) Swapins 0.00 ( +0.00%) 257.00 ( ) Refaults 415246605.00 ( +0.00%) 59183722.00 ( -85.75%) Restore refaults 0.00 ( +0.00%) 54988252.00 ( ) The second test kernel is with the full patch series applied, which replaces the scanned/rotated ratios with refault/swapin rate-based balancing. It evicts the cold anon pages more aggressively in the presence of a thrashing cache and the absence of swapins, and so converges with about 60% of the IO and reclaim activity: noconverge/5.7-rc5-mm-workingset noconverge/5.7-rc5-mm-lrubalance Scanned 64091155.00 ( +0.00%) 37579741.00 ( -41.37%) Reclaimed 61640308.00 ( +0.00%) 35129293.00 ( -43.01%) Reclaim efficiency % 96.18 ( +0.00%) 93.48 ( -2.78%) Scanned file 59211118.00 ( +0.00%) 32708385.00 ( -44.76%) Scanned anon 4880037.00 ( +0.00%) 4871356.00 ( -0.18%) Swapouts 2439957.00 ( +0.00%) 2435565.00 ( -0.18%) Swapins 257.00 ( +0.00%) 262.00 ( +1.94%) Refaults 59183722.00 ( +0.00%) 32675667.00 ( -44.79%) Restore refaults 54988252.00 ( +0.00%) 28480430.00 ( -48.21%) We're triggering this case in host sideloading scenarios: When a host's primary workload is not saturating the machine (primary load is usually driven by user activity), we can optimistically sideload a batch job; if user activity picks up and the primary workload needs the whole host during this time, we freeze the sideload and rely on it getting pushed to swap. Frequently that swapping doesn't happen and the completely inactive sideload simply stays resident while the expanding primary worklad is struggling to gain ground. Test #2: Kernel build This test is a a kernel build that is slightly memory-restricted (make -j4 inside a 400M cgroup). Despite the very aggressive swapping of cold anon pages in test #1, this test shows that the new kernel carefully balances swap against cache refaults when both the file and the cache set are pressured. It shows the patched kernel to be slightly better at finding the coldest memory from the combined anon and file set to evict under pressure. The result is lower aggregate reclaim and paging activity: z 5.7-rc5-mm 5.7-rc5-mm-lrubalance Real time 210.60 ( +0.00%) 210.97 ( +0.18%) User time 745.42 ( +0.00%) 746.48 ( +0.14%) System time 69.78 ( +0.00%) 69.79 ( +0.02%) Scanned file 354682.00 ( +0.00%) 293661.00 ( -17.20%) Scanned anon 465381.00 ( +0.00%) 378144.00 ( -18.75%) Swapouts 185920.00 ( +0.00%) 147801.00 ( -20.50%) Swapins 34583.00 ( +0.00%) 32491.00 ( -6.05%) Refaults 212664.00 ( +0.00%) 172409.00 ( -18.93%) Restore refaults 48861.00 ( +0.00%) 80091.00 ( +63.91%) Total paging IO 433167.00 ( +0.00%) 352701.00 ( -18.58%) Test #3: Overload This next test is not about performance, but rather about the predictability of the algorithm. The current balancing behavior doesn't always lead to comprehensible results, which makes performance analysis and parameter tuning (swappiness e.g.) very difficult. The test shows the balancing behavior under equivalent anon and file input. Anon and file sets are created of equal size (3/4 RAM), have the same access patterns (a hot-cold gradient), and synchronized access rates. Swappiness is raised from the default of 60 to 100 to indicate equal IO cost between swap and cache. With the vanilla balancing code, anon scans make up around 9% of the total pages scanned, or a ~1:10 ratio. This is a surprisingly skewed ratio, and it's an outcome that is hard to explain given the input parameters to the VM. The new balancing model targets a 1:2 balance: All else being equal, reclaiming a file page costs one page IO - the refault; reclaiming an anon page costs two IOs - the swapout and the swapin. In the test we observe a ~1:3 balance. The scanned and paging IO numbers indicate that the anon LRU algorithm we have in place right now does a slightly worse job at picking the coldest pages compared to the file algorithm. There is ongoing work to improve this, like Joonsoo's anon workingset patches; however, it's difficult to compare the two aging strategies when the balancing between them is behaving unintuitively. The slightly less efficient anon reclaim results in a deviation from the optimal 1:2 scan ratio we would like to see here - however, 1:3 is much closer to what we'd want to see in this test than the vanilla kernel's aging of 10+ cache pages for every anonymous one: overload-100/5.7-rc5-mm-workingset overload-100/5.7-rc5-mm-lrubalance-realfile Scanned 533633725.00 ( +0.00%) 595687785.00 ( +11.63%) Reclaimed 494325440.00 ( +0.00%) 518154380.00 ( +4.82%) Reclaim efficiency % 92.63 ( +0.00%) 86.98 ( -6.03%) Scanned file 484532894.00 ( +0.00%) 456937722.00 ( -5.70%) Scanned anon 49100831.00 ( +0.00%) 138750063.00 ( +182.58%) Swapouts 8096423.00 ( +0.00%) 48982142.00 ( +504.98%) Swapins 10027384.00 ( +0.00%) 62325044.00 ( +521.55%) Refaults 479819973.00 ( +0.00%) 451309483.00 ( -5.94%) Restore refaults 426422087.00 ( +0.00%) 399914067.00 ( -6.22%) Total paging IO 497943780.00 ( +0.00%) 562616669.00 ( +12.99%) Test #4: Parallel IO It's important to note that these patches only affect the situation where the kernel has to reclaim workingset memory, which is usually a transitionary period. The vast majority of page reclaim occuring in a system is from trimming the ever-expanding page cache. These patches don't affect cache trimming behavior. We never swap as long as we only have use-once cache moving through the file LRU, we only consider swapping when the cache is actively thrashing. The following test demonstrates this. It has an anon workingset that takes up half of RAM and then writes a file that is twice the size of RAM out to disk. As the cache is funneled through the inactive file list, no anon pages are scanned (aside from apparently some background noise of 10 pages): 5.7-rc5-mm 5.7-rc5-mm-lrubalance Scanned 10714722.00 ( +0.00%) 10723445.00 ( +0.08%) Reclaimed 10703596.00 ( +0.00%) 10712166.00 ( +0.08%) Reclaim efficiency % 99.90 ( +0.00%) 99.89 ( -0.00%) Scanned file 10714722.00 ( +0.00%) 10723435.00 ( +0.08%) Scanned anon 0.00 ( +0.00%) 10.00 ( ) Swapouts 0.00 ( +0.00%) 7.00 ( ) Swapins 0.00 ( +0.00%) 0.00 ( +0.00%) Refaults 92.00 ( +0.00%) 41.00 ( -54.84%) Restore refaults 0.00 ( +0.00%) 0.00 ( +0.00%) Total paging IO 92.00 ( +0.00%) 48.00 ( -47.31%) This patch (of 14): Currently, THP are counted as single pages until they are split right before being swapped out. However, at that point the VM is already in the middle of reclaim, and adjusting the LRU balance then is useless. Always account THP by the number of basepages, and remove the fixup from the splitting path. Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Johannes Weiner <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Minchan Kim <[email protected]> Cc: Joonsoo Kim <[email protected]>, Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Qian Cai <[email protected]> Cc: Marco Elver <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: [email protected] # 5.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

…s metrics" test Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 grate-driver#9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 grate-driver#10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 grate-driver#11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 grate-driver#12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91 ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 grate-driver#9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 grate-driver#10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 grate-driver#11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 grate-driver#12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 grate-driver#13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 grate-driver#14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 grate-driver#15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 grate-driver#16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 grate-driver#17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 grate-driver#18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Sumanth Korikkar <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

While testing the error paths in relocation, I hit the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc3+ #206 Not tainted ------------------------------------------------------ btrfs-balance/1571 is trying to acquire lock: ffff8cdbcc8f77d0 (&head_ref->mutex){+.+.}-{3:3}, at: btrfs_lookup_extent_info+0x156/0x3b0 but task is already holding lock: ffff8cdbc54adbf8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-tree-00){++++}-{3:3}: down_write_nested+0x43/0x80 __btrfs_tree_lock+0x27/0x100 btrfs_search_slot+0x248/0x890 relocate_tree_blocks+0x490/0x650 relocate_block_group+0x1ba/0x5d0 kretprobe_trampoline+0x0/0x50 -> #1 (btrfs-csum-01){++++}-{3:3}: down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x27/0x100 btrfs_read_lock_root_node+0x31/0x40 btrfs_search_slot+0x5ab/0x890 btrfs_del_csums+0x10b/0x3c0 __btrfs_free_extent+0x49d/0x8e0 __btrfs_run_delayed_refs+0x283/0x11f0 btrfs_run_delayed_refs+0x86/0x220 btrfs_start_dirty_block_groups+0x2ba/0x520 kretprobe_trampoline+0x0/0x50 -> #0 (&head_ref->mutex){+.+.}-{3:3}: __lock_acquire+0x1167/0x2150 lock_acquire+0x116/0x3e0 __mutex_lock+0x7e/0x7b0 btrfs_lookup_extent_info+0x156/0x3b0 walk_down_proc+0x1c3/0x280 walk_down_tree+0x64/0xe0 btrfs_drop_subtree+0x182/0x260 do_relocation+0x52e/0x660 relocate_tree_blocks+0x2ae/0x650 relocate_block_group+0x1ba/0x5d0 kretprobe_trampoline+0x0/0x50 other info that might help us debug this: Chain exists of: &head_ref->mutex --> btrfs-csum-01 --> btrfs-tree-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-tree-00); lock(btrfs-csum-01); lock(btrfs-tree-00); lock(&head_ref->mutex); *** DEADLOCK *** 5 locks held by btrfs-balance/1571: #0: ffff8cdb89749ff8 (&fs_info->delete_unused_bgs_mutex){+.+.}-{3:3}, at: btrfs_balance+0x563/0xf40 #1: ffff8cdb89748838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x156/0x300 #2: ffff8cdbc2c16650 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x413/0x5c0 #3: ffff8cdbc135f538 (btrfs-treloc-01){+.+.}-{3:3}, at: __btrfs_tree_lock+0x27/0x100 #4: ffff8cdbc54adbf8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x100 stack backtrace: CPU: 1 PID: 1571 Comm: btrfs-balance Not tainted 5.10.0-rc3+ #206 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 ? trace_call_bpf+0x139/0x260 __lock_acquire+0x1167/0x2150 lock_acquire+0x116/0x3e0 ? btrfs_lookup_extent_info+0x156/0x3b0 __mutex_lock+0x7e/0x7b0 ? btrfs_lookup_extent_info+0x156/0x3b0 ? btrfs_lookup_extent_info+0x156/0x3b0 ? release_extent_buffer+0x124/0x170 ? _raw_spin_unlock+0x1f/0x30 ? release_extent_buffer+0x124/0x170 btrfs_lookup_extent_info+0x156/0x3b0 walk_down_proc+0x1c3/0x280 walk_down_tree+0x64/0xe0 btrfs_drop_subtree+0x182/0x260 do_relocation+0x52e/0x660 relocate_tree_blocks+0x2ae/0x650 ? add_tree_block+0x149/0x1b0 relocate_block_group+0x1ba/0x5d0 elfcorehdr_read+0x40/0x40 ? elfcorehdr_read+0x40/0x40 ? btrfs_balance+0x796/0xf40 ? __kthread_parkme+0x66/0x90 ? btrfs_balance+0xf40/0xf40 ? balance_kthread+0x37/0x50 ? kthread+0x137/0x150 ? __kthread_bind_mask+0x60/0x60 ? ret_from_fork+0x1f/0x30 As you can see this is bogus, we never take another tree's lock under the csum lock. This happens because sometimes we have to read tree blocks from disk without knowing which root they belong to during relocation. We defaulted to an owner of 0, which translates to an fs tree. This is fine as all fs trees have the same class, but obviously isn't fine if the block belongs to a COW only tree. Thankfully COW only trees only have their owners root as a reference to them, and since we already look up the extent information during relocation, go ahead and check and see if this block might belong to a COW only tree, and if so save the owner in the tree_block struct. This allows us to read_tree_block with the proper owner, which gets rid of this lockdep splat. Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

Add 3 new tests for tag-based KASAN modes: 1. Check that match-all pointer tag is not assigned randomly. 2. Check that 0xff works as a match-all pointer tag. 3. Check that there are no match-all memory tags. Note, that test #3 causes a significant number (255) of KASAN reports to be printed during execution for the SW_TAGS mode. Link: https://linux-review.googlesource.com/id/I78f1375efafa162b37f3abcb2c5bc2f3955dfd8e Link: https://lkml.kernel.org/r/da841a5408e2204bf25f3b23f70540a65844e8a4.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <[email protected]> Reviewed-by: Marco Elver <[email protected]> Reviewed-by: Alexander Potapenko <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Branislav Rankov <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Evgenii Stepanov <[email protected]> Cc: Kevin Brodsky <[email protected]> Cc: Peter Collingbourne <[email protected]> Cc: Vincenzo Frascino <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

…_work [ Upstream commit ed05c7c ] When enable debug config, it print below warning while shut down wlan interface shuh as run "ifconfig wlan0 down". The reason is because ar->regd_update_work is ran once, and it is will call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which is running in workqueue of ieee80211_local queued by ieee80211_queue_work(). Another thread from "ifconfig wlan0 down" will also accuqire the lock by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and then it call ieee80211_stop_device() to flush_workqueue(local->workqueue), this will wait the workqueue of ieee80211_local finished. Then deadlock will happen easily if the two thread run meanwhile. Below warning disappeared after this change. [ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0) [ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan [ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0 [ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0 [ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0 [ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20 [ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error [ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0 [ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0 [ 914.117583] ====================================================== [ 914.117592] WARNING: possible circular locking dependency detected [ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE [ 914.117611] ------------------------------------------------------ [ 914.117618] ifconfig/2805 is trying to acquire lock: [ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470 [ 914.117674] but task is already holding lock: [ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.117872] which lock already depends on the new lock. [ 914.117880] the existing dependency chain (in reverse order) is: [ 914.117888] -> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}: [ 914.117910] __mutex_lock+0xa0/0x9c0 [ 914.117930] mutex_lock_nested+0x1b/0x20 [ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211] [ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211] [ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211] [ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211] [ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k] [ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k] [ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k] [ 914.118656] process_one_work+0x228/0x670 [ 914.118669] worker_thread+0x4d/0x440 [ 914.118680] kthread+0x16d/0x1b0 [ 914.118697] ret_from_fork+0x22/0x30 [ 914.118714] -> #2 (rtnl_mutex){+.+.}-{4:4}: [ 914.118736] __mutex_lock+0xa0/0x9c0 [ 914.118751] mutex_lock_nested+0x1b/0x20 [ 914.118767] rtnl_lock+0x17/0x20 [ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k] [ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k] [ 914.118897] process_one_work+0x228/0x670 [ 914.118909] worker_thread+0x4d/0x440 [ 914.118920] kthread+0x16d/0x1b0 [ 914.118934] ret_from_fork+0x22/0x30 [ 914.118948] -> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}: [ 914.118972] process_one_work+0x1fa/0x670 [ 914.118984] worker_thread+0x4d/0x440 [ 914.118996] kthread+0x16d/0x1b0 [ 914.119010] ret_from_fork+0x22/0x30 [ 914.119023] -> #0 ((wq_completion)phy0){+.+.}-{0:0}: [ 914.119045] __lock_acquire+0x146d/0x1cf0 [ 914.119057] lock_acquire+0x19b/0x360 [ 914.119067] flush_workqueue+0xae/0x470 [ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.119409] ieee80211_stop+0x45/0x180 [mac80211] [ 914.119557] __dev_close_many+0xb3/0x120 [ 914.119573] __dev_change_flags+0xc3/0x1d0 [ 914.119590] dev_change_flags+0x29/0x70 [ 914.119605] devinet_ioctl+0x653/0x810 [ 914.119620] inet_ioctl+0x193/0x1e0 [ 914.119631] sock_do_ioctl+0x4d/0xf0 [ 914.119649] sock_ioctl+0x262/0x340 [ 914.119665] __x64_sys_ioctl+0x96/0xd0 [ 914.119678] do_syscall_64+0x3d/0xd0 [ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.119709] other info that might help us debug this: [ 914.119717] Chain exists of: (wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx [ 914.119745] Possible unsafe locking scenario: [ 914.119752] CPU0 CPU1 [ 914.119758] ---- ---- [ 914.119765] lock(&rdev->wiphy.mtx); [ 914.119778] lock(rtnl_mutex); [ 914.119792] lock(&rdev->wiphy.mtx); [ 914.119807] lock((wq_completion)phy0); [ 914.119819] *** DEADLOCK *** [ 914.119827] 2 locks held by ifconfig/2805: [ 914.119837] #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20 [ 914.119872] #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.120039] stack backtrace: [ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1 [ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 914.120074] Call Trace: [ 914.120084] <TASK> [ 914.120094] dump_stack_lvl+0x73/0xa4 [ 914.120119] dump_stack+0x10/0x12 [ 914.120135] print_circular_bug.isra.44+0x221/0x2e0 [ 914.120165] check_noncircular+0x106/0x150 [ 914.120203] __lock_acquire+0x146d/0x1cf0 [ 914.120215] ? __lock_acquire+0x146d/0x1cf0 [ 914.120245] lock_acquire+0x19b/0x360 [ 914.120259] ? flush_workqueue+0x87/0x470 [ 914.120286] ? lockdep_init_map_type+0x6b/0x250 [ 914.120310] flush_workqueue+0xae/0x470 [ 914.120327] ? flush_workqueue+0x87/0x470 [ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150 [ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.120906] ieee80211_stop+0x45/0x180 [mac80211] [ 914.121060] __dev_close_many+0xb3/0x120 [ 914.121081] __dev_change_flags+0xc3/0x1d0 [ 914.121109] dev_change_flags+0x29/0x70 [ 914.121131] devinet_ioctl+0x653/0x810 [ 914.121149] ? __might_fault+0x77/0x80 [ 914.121179] inet_ioctl+0x193/0x1e0 [ 914.121194] ? inet_ioctl+0x193/0x1e0 [ 914.121218] ? __might_fault+0x77/0x80 [ 914.121238] ? _copy_to_user+0x68/0x80 [ 914.121266] sock_do_ioctl+0x4d/0xf0 [ 914.121283] ? inet_stream_connect+0x60/0x60 [ 914.121297] ? sock_do_ioctl+0x4d/0xf0 [ 914.121329] sock_ioctl+0x262/0x340 [ 914.121347] ? sock_ioctl+0x262/0x340 [ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280 [ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50 [ 914.121416] __x64_sys_ioctl+0x96/0xd0 [ 914.121430] ? br_ioctl_call+0x90/0x90 [ 914.121445] ? __x64_sys_ioctl+0x96/0xd0 [ 914.121465] do_syscall_64+0x3d/0xd0 [ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.121497] RIP: 0033:0x7f0ed051737b [ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48 [ 914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b [ 914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004 [ 914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001 [ 914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe [ 914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000 [ 914.121620] </TASK> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 grate-driver#9 0x556701cacfac in test_and_print tests/builtin-test.c:265 grate-driver#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 grate-driver#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 grate-driver#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 grate-driver#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 grate-driver#14 0x556701d3be90 in run_argv tools/perf/perf.c:421 grate-driver#15 0x556701d3c3f8 in main tools/perf/perf.c:537 grate-driver#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b684c09 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 grate-driver#9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 grate-driver#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 grate-driver#11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <[email protected]> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] grate-driver#9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: [email protected] Signed-off-by: Ewan D. Milne <[email protected]> Signed-off-by: Keith Busch <[email protected]>

Currently DP driver is executed independent of PM runtime framework. This leads msm eDP panel can not being detected by edp_panel driver during generic_edp_panel_probe() due to AUX DPCD read failed at edp panel driver. Incorporate PM runtime framework into DP driver so that host controller's power and clocks are enable/disable through PM runtime mechanism. Once PM runtime framework is incorporated into DP driver, waking up device from power up path is not necessary. Hence remove it. After incorporating pm_runtime framework into eDP/DP driver, dp_pm_suspend() to handle power off both DP phy and controller during suspend and dp_pm_resume() to handle power on both DP phy and controller during resume are not necessary. Therefore both dp_pm_suspend() and dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and dp_pm_runtime_resume() respectively. Changes in v9: -- silent compiler warning message at dp_power_init() and dp_power_deinit() with W1 flag Changes in v7: -- add comments to dp_pm_runtime_resume() -- add comments to dp_bridge_hpd_enable() -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify() Changes in v6: -- delete dp_power_client_deinit(dp->power); -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle() -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle() -- add IRQF_NO_AUTOEN to devm_request_irq() -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend() -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable() Changes in v5: -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() -- squash add pm_runtime_force_suspend()/resume() patch into this patch Changes in v4: -- reworded commit text to explain why pm_framework is required for edp panel -- reworded commit text to explain autosuspend is choiced -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3 -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3 -- return value from pm_runtime_resume_and_get() directly -- check return value of devm_pm_runtime_enable() -- delete pm_runtime_xxx from dp_display_remove() -- drop dp_display_host_init() from EV_HPD_INIT_SETUP -- drop both dp_pm_prepare() and dp_pm_compete() from this change -- delete ST_SUSPENDED state -- rewording commit text to add more details regrading the purpose of this change Changes in v3: -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch -- use pm_runtime_resume_and_get() instead of pm_runtime_get() -- error checking pm_runtime_resume_and_get() return value -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case -- replace dp_pm_suspend() with pm_runtime_force_suspend() -- replace dp_pm_resume() with pm_runtime_force_resume() Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]>

Petr Machata says: ==================== mlxsw: CFF flood mode: NVE underlay configuration Recently, support for CFF flood mode (for Compressed FID Flooding) was added to the mlxsw driver. The most recent patchset has a detailed coverage of what CFF is and what has changed and how: https://lore.kernel.org/netdev/[email protected]/ In CFF flood mode, each FID allocates a handful (in our implementation two or three) consecutive PGT entries. One entry holds the flood vector for unknown-UC traffic, one for MC, one for BC. To determine how to look up flood vectors, the CFF flood mode uses a concept of flood profiles, which are IDs that reference mappings from traffic types to offsets. In the case of CFF flood mode, the offset in question is applied to the PGT address configured at a FID. The same mechanism is used by NVE underlay for flooding. Again the profile ID and the traffic type determine the offset to apply, this time to KVD address used to look up flooding entries. Since mlxsw configures NVE underlay flood the same regardless of traffic type, only one offset was ever needed: the zero, which is the default, and thus no explicit configuration was needed. Now that CFF uses profiles as well, it would be better to configure the profile used by NVE explicitly, to make the configuration visible in the source code. In this patchset, add the register support (in patch #1), add a new traffic type to refer to "any traffic at all" (in patch #2) and finally configure the NVE profile explicitly for FIDs (in patch #3). So far, the implicitly configured flood profile was the ID 0. With this patchset, it changes to 3, leaving the 0 free to allow us to spot missed configuration. ==================== Signed-off-by: David S. Miller <[email protected]>

syzbot found a potential circular dependency leading to a deadlock: -> #3 (&hdev->req_lock){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551 hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935 rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345 rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274 vfs_write+0x277/0xcf5 fs/read_write.c:594 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #2 (rfkill_global_mutex){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045 hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622 __vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline] vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374 vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline] vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511 call_write_iter include/linux/fs.h:2109 [inline] new_sync_write fs/read_write.c:509 [inline] vfs_write+0xaa8/0xcf5 fs/read_write.c:596 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #1 (&data->open_mutex){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75 hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989 hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline] hci_sched_acl net/bluetooth/hci_core.c:3583 [inline] hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654 process_one_work+0x901/0xfb8 kernel/workqueue.c:2310 worker_thread+0xa67/0x1003 kernel/workqueue.c:2457 kthread+0x36a/0x430 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 -> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3053 [inline] check_prevs_add kernel/locking/lockdep.c:3172 [inline] validate_chain kernel/locking/lockdep.c:3787 [inline] __lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011 lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622 __flush_work+0xee/0x19f kernel/workqueue.c:3090 hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352 hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553 hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935 rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345 rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274 vfs_write+0x277/0xcf5 fs/read_write.c:594 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb This change removes the need for acquiring the open_mutex in vhci_send_frame, thus eliminating the potential deadlock while maintaining the required packet ordering. Fixes: 92d4abd ("Bluetooth: vhci: Fix race when opening vhci device") Signed-off-by: Ying Hsu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

Patch series "Multi-size THP for anonymous memory", v9. A series to implement multi-size THP (mTHP) for anonymous memory (previously called "small-sized THP" and "large anonymous folios"). The objective of this is to improve performance by allocating larger chunks of memory during anonymous page faults: 1) Since SW (the kernel) is dealing with larger chunks of memory than base pages, there are efficiency savings to be had; fewer page faults, batched PTE and RMAP manipulation, reduced lru list, etc. In short, we reduce kernel overhead. This should benefit all architectures. 2) Since we are now mapping physically contiguous chunks of memory, we can take advantage of HW TLB compression techniques. A reduction in TLB pressure speeds up kernel and user space. arm64 systems have 2 mechanisms to coalesce TLB entries; "the contiguous bit" (architectural) and HPA (uarch). This version incorporates David's feedback on the core patches (#3, #4) and adds some RB and TB tags (see change log for details). By default, the existing behaviour (and performance) is maintained. The user must explicitly enable multi-size THP to see the performance benefit. This is done via a new sysfs interface (as recommended by David Hildenbrand - thanks to David for the suggestion)! This interface is inspired by the existing per-hugepage-size sysfs interface used by hugetlb, provides full backwards compatibility with the existing PMD-size THP interface, and provides a base for future extensibility. See [9] for detailed discussion of the interface. This series is based on mm-unstable (715b67adf4c8). Prerequisites ============= I'm removing this section on the basis that I don't believe what we were previously calling prerequisites are really prerequisites anymore. We originally defined them when mTHP was a compile-time feature. There is now a runtime control to opt-in to mTHP; when disabled, correctness and performance are as before. When enabled, the code is still correct/robust, but in the absence of the one remaining item (compaction) there may be a performance impact in some corners. See the old list in the v8 cover letter at [8]. And a longer explanation of my thinking here [10]. SUMMARY: I don't think we should hold this series up, waiting for the items on the prerequisites list. I believe this series should be ready now so hopefully can be added to mm-unstable for some testing, then fingers crossed for v6.8. Testing ======= The series includes patches for mm selftests to enlighten the cow and khugepaged tests to explicitly test with multi-size THP, in the same way that PMD-sized THP is tested. The new tests all pass, and no regressions are observed in the mm selftest suite. I've also run my usual kernel compilation and java script benchmarks without any issues. Refer to my performance numbers posted with v6 [6]. (These are for multi-size THP only - they do not include the arm64 contpte follow-on series). John Hubbard at Nvidia has indicated dramatic 10x performance improvements for some workloads at [11]. (Observed using v6 of this series as well as the arm64 contpte series). Kefeng Wang at Huawei has also indicated he sees improvements at [12] although there are some latency regressions also. I've also checked that there is no regression in the write fault path when mTHP is disabled using a microbenchmark. I ran it for a baseline kernel, as well as v8 and v9. I repeated on Ampere Altra (bare metal) and Apple M2 (VM): | | m2 vm | altra | |--------------|---------------------|---------------------| | kernel | mean | std_rel | mean | std_rel | |--------------|----------|----------|----------|----------| | baseline | 0.000% | 0.341% | 0.000% | 3.581% | | anonfolio-v8 | 0.005% | 0.272% | 5.068% | 1.128% | | anonfolio-v9 | -0.013% | 0.442% | 0.107% | 1.788% | There is no measurable difference on M2, but altra has a slow down in v8 which is fixed in v9 by moving the THP order check to be inline within thp_vma_allowable_orders(), as suggested by David. This patch (of 10): In preparation for the introduction of anonymous multi-size THP, we would like to be able to split them when they have unmapped subpages, in order to free those unused pages under memory pressure. So remove the artificial requirement that the large folio needed to be at least PMD-sized. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ryan Roberts <[email protected]> Reviewed-by: Yu Zhao <[email protected]> Reviewed-by: Yin Fengwei <[email protected]> Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Barry Song <[email protected]> Tested-by: Kefeng Wang <[email protected]> Tested-by: John Hubbard <[email protected]> Cc: Alistair Popple <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Rientjes <[email protected]> Cc: "Huang, Ying" <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Itaru Kitayama <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Yang Shi <[email protected]> Cc: Zi Yan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Calling led_trigger_register() when attaching a PHY located on an SFP module potentially (and practically) leads into a deadlock. Fix this by not calling led_trigger_register() for PHYs localted on SFP modules as such modules actually never got any LEDs. ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4-next-20231208+ #0 Tainted: G O ------------------------------------------------------ kworker/u8:2/43 is trying to acquire lock: ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8 but task is already holding lock: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&sfp->sm_mutex){+.+.}-{3:3}: __mutex_lock+0x88/0x7a0 mutex_lock_nested+0x20/0x28 cleanup_module+0x2ae0/0x3120 [sfp] sfp_register_bus+0x5c/0x9c sfp_register_socket+0x48/0xd4 cleanup_module+0x271c/0x3120 [sfp] platform_probe+0x64/0xb8 really_probe+0x17c/0x3c0 __driver_probe_device+0x78/0x164 driver_probe_device+0x3c/0xd4 __driver_attach+0xec/0x1f0 bus_for_each_dev+0x60/0xa0 driver_attach+0x20/0x28 bus_add_driver+0x108/0x208 driver_register+0x5c/0x118 __platform_driver_register+0x24/0x2c init_module+0x28/0xa7c [sfp] do_one_initcall+0x70/0x2ec do_init_module+0x54/0x1e4 load_module+0x1b78/0x1c8c __do_sys_init_module+0x1bc/0x2cc __arm64_sys_init_module+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #2 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x88/0x7a0 mutex_lock_nested+0x20/0x28 rtnl_lock+0x18/0x20 set_device_name+0x30/0x130 netdev_trig_activate+0x13c/0x1ac led_trigger_set+0x118/0x234 led_trigger_write+0x104/0x17c sysfs_kf_bin_write+0x64/0x80 kernfs_fop_write_iter+0x128/0x1b4 vfs_write+0x178/0x2a4 ksys_write+0x58/0xd4 __arm64_sys_write+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #1 (&led_cdev->trigger_lock){++++}-{3:3}: down_write+0x4c/0x13c led_trigger_write+0xf8/0x17c sysfs_kf_bin_write+0x64/0x80 kernfs_fop_write_iter+0x128/0x1b4 vfs_write+0x178/0x2a4 ksys_write+0x58/0xd4 __arm64_sys_write+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #0 (triggers_list_lock){++++}-{3:3}: __lock_acquire+0x12a0/0x2014 lock_acquire+0x100/0x2ac down_write+0x4c/0x13c led_trigger_register+0x4c/0x1a8 phy_led_triggers_register+0x9c/0x214 phy_attach_direct+0x154/0x36c phylink_attach_phy+0x30/0x60 phylink_sfp_connect_phy+0x140/0x510 sfp_add_phy+0x34/0x50 init_module+0x15c/0xa7c [sfp] cleanup_module+0x1d94/0x3120 [sfp] cleanup_module+0x2bb4/0x3120 [sfp] process_one_work+0x1f8/0x4ec worker_thread+0x1e8/0x3d8 kthread+0x104/0x110 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sfp->sm_mutex); lock(rtnl_mutex); lock(&sfp->sm_mutex); lock(triggers_list_lock); *** DEADLOCK *** 4 locks held by kworker/u8:2/43: #0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec #1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec #2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20 #3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp] stack backtrace: CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-20231208+ #0 Hardware name: Bananapi BPI-R4 (DT) Workqueue: events_power_efficient cleanup_module [sfp] Call trace: dump_backtrace+0xa8/0x10c show_stack+0x14/0x1c dump_stack_lvl+0x5c/0xa0 dump_stack+0x14/0x1c print_circular_bug+0x328/0x430 check_noncircular+0x124/0x134 __lock_acquire+0x12a0/0x2014 lock_acquire+0x100/0x2ac down_write+0x4c/0x13c led_trigger_register+0x4c/0x1a8 phy_led_triggers_register+0x9c/0x214 phy_attach_direct+0x154/0x36c phylink_attach_phy+0x30/0x60 phylink_sfp_connect_phy+0x140/0x510 sfp_add_phy+0x34/0x50 init_module+0x15c/0xa7c [sfp] cleanup_module+0x1d94/0x3120 [sfp] cleanup_module+0x2bb4/0x3120 [sfp] process_one_work+0x1f8/0x4ec worker_thread+0x1e8/0x3d8 kthread+0x104/0x110 ret_from_fork+0x10/0x20 Signed-off-by: Daniel Golle <[email protected]> Fixes: 01e5b72 ("net: phy: Add a binding for PHY LEDs") Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <[email protected]>

syzbot found a potential circular dependency leading to a deadlock: -> #3 (&hdev->req_lock){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551 hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935 rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345 rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274 vfs_write+0x277/0xcf5 fs/read_write.c:594 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #2 (rfkill_global_mutex){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045 hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622 __vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline] vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374 vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline] vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511 call_write_iter include/linux/fs.h:2109 [inline] new_sync_write fs/read_write.c:509 [inline] vfs_write+0xaa8/0xcf5 fs/read_write.c:596 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #1 (&data->open_mutex){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75 hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989 hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline] hci_sched_acl net/bluetooth/hci_core.c:3583 [inline] hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654 process_one_work+0x901/0xfb8 kernel/workqueue.c:2310 worker_thread+0xa67/0x1003 kernel/workqueue.c:2457 kthread+0x36a/0x430 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 -> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3053 [inline] check_prevs_add kernel/locking/lockdep.c:3172 [inline] validate_chain kernel/locking/lockdep.c:3787 [inline] __lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011 lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622 __flush_work+0xee/0x19f kernel/workqueue.c:3090 hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352 hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553 hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935 rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345 rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274 vfs_write+0x277/0xcf5 fs/read_write.c:594 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb This change removes the need for acquiring the open_mutex in vhci_send_frame, thus eliminating the potential deadlock while maintaining the required packet ordering. Fixes: 92d4abd ("Bluetooth: vhci: Fix race when opening vhci device") Signed-off-by: Ying Hsu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

Jiri Pirko says: ==================== devlink: introduce notifications filtering From: Jiri Pirko <[email protected]> Currently the user listening on a socket for devlink notifications gets always all messages for all existing devlink instances and objects, even if he is interested only in one of those. That may cause unnecessary overhead on setups with thousands of instances present. User is currently able to narrow down the devlink objects replies to dump commands by specifying select attributes. Allow similar approach for notifications providing user a new notify-filter-set command to select attributes with values the notification message has to match. In that case, it is delivered to the socket. Note that the filtering is done per-socket, so multiple users may specify different selection of attributes with values. This patchset initially introduces support for following attributes: DEVLINK_ATTR_BUS_NAME DEVLINK_ATTR_DEV_NAME DEVLINK_ATTR_PORT_INDEX Patches #1 - #4 are preparations in devlink code, patch #3 is an optimization done on the way. Patches #5 - #7 are preparations in netlink and generic netlink code. Patch #8 is the main one in this set implementing of the notify-filter-set command and the actual per-socket filtering. Patch grate-driver#9 extends the infrastructure allowing to filter according to a port index. Example: $ devlink mon port pci/0000:08:00.0/32768 [port,new] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth netdev eth3 flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth netdev eth3 flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,del] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

syzbot found a potential circular dependency leading to a deadlock: -> #3 (&hdev->req_lock){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551 hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935 rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345 rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274 vfs_write+0x277/0xcf5 fs/read_write.c:594 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #2 (rfkill_global_mutex){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045 hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622 __vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline] vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374 vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline] vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511 call_write_iter include/linux/fs.h:2109 [inline] new_sync_write fs/read_write.c:509 [inline] vfs_write+0xaa8/0xcf5 fs/read_write.c:596 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #1 (&data->open_mutex){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75 hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989 hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline] hci_sched_acl net/bluetooth/hci_core.c:3583 [inline] hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654 process_one_work+0x901/0xfb8 kernel/workqueue.c:2310 worker_thread+0xa67/0x1003 kernel/workqueue.c:2457 kthread+0x36a/0x430 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 -> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3053 [inline] check_prevs_add kernel/locking/lockdep.c:3172 [inline] validate_chain kernel/locking/lockdep.c:3787 [inline] __lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011 lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622 __flush_work+0xee/0x19f kernel/workqueue.c:3090 hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352 hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553 hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935 rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345 rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274 vfs_write+0x277/0xcf5 fs/read_write.c:594 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb This change removes the need for acquiring the open_mutex in vhci_send_frame, thus eliminating the potential deadlock while maintaining the required packet ordering. Fixes: 92d4abd ("Bluetooth: vhci: Fix race when opening vhci device") Signed-off-by: Ying Hsu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

Ido Schimmel says: ==================== Add MDB bulk deletion support This patchset adds MDB bulk deletion support, allowing user space to request the deletion of matching entries instead of dumping the entire MDB and issuing a separate deletion request for each matching entry. Support is added in both the bridge and VXLAN drivers in a similar fashion to the existing FDB bulk deletion support. The parameters according to which bulk deletion can be performed are similar to the FDB ones, namely: Destination port, VLAN ID, state (e.g., "permanent"), routing protocol, source / destination VNI, destination IP and UDP port. Flushing based on flags (e.g., "offload", "fast_leave", "added_by_star_ex", "blocked") is not currently supported, but can be added in the future, if a use case arises. Patch #1 adds a new uAPI attribute to allow specifying the state mask according to which bulk deletion will be performed, if any. Patch #2 adds a new policy according to which bulk deletion requests (with 'NLM_F_BULK' flag set) will be parsed. Patches #3-#4 add a new NDO for MDB bulk deletion and invoke it from the rtnetlink code when a bulk deletion request is made. Patches #5-#6 implement the MDB bulk deletion NDO in the bridge and VXLAN drivers, respectively. Patch #7 allows user space to issue MDB bulk deletion requests by no longer rejecting the 'NLM_F_BULK' flag when it is set in 'RTM_DELMDB' requests. Patches #8-grate-driver#9 add selftests for both drivers, for both good and bad flows. iproute2 changes can be found here [1]. https://github.com/idosch/iproute2/tree/submit/mdb_flush_v1 ==================== Signed-off-by: David S. Miller <[email protected]>

Patch series "Multi-size THP for anonymous memory", v9. A series to implement multi-size THP (mTHP) for anonymous memory (previously called "small-sized THP" and "large anonymous folios"). The objective of this is to improve performance by allocating larger chunks of memory during anonymous page faults: 1) Since SW (the kernel) is dealing with larger chunks of memory than base pages, there are efficiency savings to be had; fewer page faults, batched PTE and RMAP manipulation, reduced lru list, etc. In short, we reduce kernel overhead. This should benefit all architectures. 2) Since we are now mapping physically contiguous chunks of memory, we can take advantage of HW TLB compression techniques. A reduction in TLB pressure speeds up kernel and user space. arm64 systems have 2 mechanisms to coalesce TLB entries; "the contiguous bit" (architectural) and HPA (uarch). This version incorporates David's feedback on the core patches (#3, #4) and adds some RB and TB tags (see change log for details). By default, the existing behaviour (and performance) is maintained. The user must explicitly enable multi-size THP to see the performance benefit. This is done via a new sysfs interface (as recommended by David Hildenbrand - thanks to David for the suggestion)! This interface is inspired by the existing per-hugepage-size sysfs interface used by hugetlb, provides full backwards compatibility with the existing PMD-size THP interface, and provides a base for future extensibility. See [9] for detailed discussion of the interface. This series is based on mm-unstable (715b67adf4c8). Prerequisites ============= I'm removing this section on the basis that I don't believe what we were previously calling prerequisites are really prerequisites anymore. We originally defined them when mTHP was a compile-time feature. There is now a runtime control to opt-in to mTHP; when disabled, correctness and performance are as before. When enabled, the code is still correct/robust, but in the absence of the one remaining item (compaction) there may be a performance impact in some corners. See the old list in the v8 cover letter at [8]. And a longer explanation of my thinking here [10]. SUMMARY: I don't think we should hold this series up, waiting for the items on the prerequisites list. I believe this series should be ready now so hopefully can be added to mm-unstable for some testing, then fingers crossed for v6.8. Testing ======= The series includes patches for mm selftests to enlighten the cow and khugepaged tests to explicitly test with multi-size THP, in the same way that PMD-sized THP is tested. The new tests all pass, and no regressions are observed in the mm selftest suite. I've also run my usual kernel compilation and java script benchmarks without any issues. Refer to my performance numbers posted with v6 [6]. (These are for multi-size THP only - they do not include the arm64 contpte follow-on series). John Hubbard at Nvidia has indicated dramatic 10x performance improvements for some workloads at [11]. (Observed using v6 of this series as well as the arm64 contpte series). Kefeng Wang at Huawei has also indicated he sees improvements at [12] although there are some latency regressions also. I've also checked that there is no regression in the write fault path when mTHP is disabled using a microbenchmark. I ran it for a baseline kernel, as well as v8 and v9. I repeated on Ampere Altra (bare metal) and Apple M2 (VM): | | m2 vm | altra | |--------------|---------------------|---------------------| | kernel | mean | std_rel | mean | std_rel | |--------------|----------|----------|----------|----------| | baseline | 0.000% | 0.341% | 0.000% | 3.581% | | anonfolio-v8 | 0.005% | 0.272% | 5.068% | 1.128% | | anonfolio-v9 | -0.013% | 0.442% | 0.107% | 1.788% | There is no measurable difference on M2, but altra has a slow down in v8 which is fixed in v9 by moving the THP order check to be inline within thp_vma_allowable_orders(), as suggested by David. This patch (of 10): In preparation for the introduction of anonymous multi-size THP, we would like to be able to split them when they have unmapped subpages, in order to free those unused pages under memory pressure. So remove the artificial requirement that the large folio needed to be at least PMD-sized. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ryan Roberts <[email protected]> Reviewed-by: Yu Zhao <[email protected]> Reviewed-by: Yin Fengwei <[email protected]> Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Barry Song <[email protected]> Tested-by: Kefeng Wang <[email protected]> Tested-by: John Hubbard <[email protected]> Cc: Alistair Popple <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Rientjes <[email protected]> Cc: "Huang, Ying" <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Itaru Kitayama <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Yang Shi <[email protected]> Cc: Zi Yan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ #532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>

An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () grate-driver#9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <[email protected]> Signed-off-by: Xin Liu <[email protected]> Signed-off-by: Changye Wu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

During ieee80211_set_active_links() we do (among the others): 1. Call drv_change_vif_links() with both old_active and new_active 2. Unassign the chanctx for the removed link(s) (if any) 3. Assign chanctx to the added link(s) (if any) 4. Call drv_change_vif_links() with the new_active links bitmap The problem here is that during step #1 the driver doesn't know whether we will activate multiple links simultaneously or are just doing a link switch, so it can't check there if multiple links are supported/enabled. (Some of the drivers might enable/disable this option dynamically) And during step #3, in which the driver already knows that, returning an error code (for example when multiple links are not supported or disabled), will cause a warning, and we will still complete the transition to the new_active links. (It is hard to undo things in that stage, since we released channels etc.) Therefore add a driver callback to check if the desired new_active links will be supported by the driver or not. This callback will be called in the beginning of ieee80211_set_active_links() so we won't do anything before we are sure it is supported. Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Gregory Greenman <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Link: https://msgid.link/20231220133549.64c4d70b33b8.I79708619be76b8ecd4ef3975205b8f903e24a2cd@changeid Signed-off-by: Johannes Berg <[email protected]>

[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 grate-driver#9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 grate-driver#10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 grate-driver#11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 grate-driver#12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 grate-driver#9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 grate-driver#10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 grate-driver#11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 grate-driver#12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 grate-driver#13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 grate-driver#14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 grate-driver#15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <[email protected]> Cc: He Kuang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d45c4b4 ] A thread started via eg. user_mode_thread() runs in the kernel to begin with and then may later return to userspace. While it's running in the kernel it has a pt_regs at the base of its kernel stack, but that pt_regs is all zeroes. If the thread oopses in that state, it leads to an ugly stack trace with a big block of zero GPRs, as reported by Joel: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3 Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV Call Trace: [c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable) [c0000000036afb30] [c00000000013c524] panic+0x178/0x424 [c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324 [c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344 [c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac [c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0 [c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c --- interrupt: 0 at 0x0 NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000 REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty) MSR: 0000000000000000 <> CR: 00000000 XER: 00000000 CFAR: 0000000000000000 IRQMASK: 0 GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 NIP [0000000000000000] 0x0 LR [0000000000000000] 0x0 --- interrupt: 0 The all-zero pt_regs looks ugly and conveys no useful information, other than its presence. So detect that case and just show the presence of the frame by printing the interrupt marker, eg: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries Call Trace: [c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable) [c000000003aabb30] [c00000000014c624] panic+0x178/0x424 [c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324 [c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344 [c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac [c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0 [c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c --- interrupt: 0 at 0x0 To avoid ever suppressing a valid pt_regs make sure the pt_regs has a zero MSR and TRAP value, and is located at the very base of the stack. Fixes: 6895dfc ("powerpc: copy_thread fill in interrupt frame marker and back chain") Reported-by: Joel Stanley <[email protected]> Reported-by: Nicholas Piggin <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 34c4eff ] KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was stored to memory at: virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline] virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was created at: slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline] virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58 virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline] virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: vsock-loopback vsock_loopback_work ===================================================== The following simple reproducer can cause the issue described above: int main(void) { int sock; struct sockaddr_vm addr = { .svm_family = AF_VSOCK, .svm_cid = VMADDR_CID_ANY, .svm_port = 1234, }; sock = socket(AF_VSOCK, SOCK_STREAM, 0); connect(sock, (struct sockaddr *)&addr, sizeof(addr)); return 0; } This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the `struct virtio_vsock_hdr` are not initialized when a new skb is allocated in `virtio_transport_init_hdr()`. This patch resolves the issue by initializing these fields during allocation. Fixes: 71dc9ec ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=0c8ce1da0ac31abbadcd Signed-off-by: Shigeru Yoshida <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit dd976a9 upstream. The smp_processor_id() shouldn't be called from preemptible code. Instead use get_cpu() and put_cpu() which disables preemption in addition to getting the processor id. Enable preemption back after calling schedule_work() to make sure that the work gets scheduled on all cores other than the current core. We want to avoid a scenario where current core's stack trace is printed multiple times and one core's stack trace isn't printed because of scheduling of current task. This fixes the following bug: [ 119.143590] sysrq: Show backtrace of all active CPUs [ 119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873 [ 119.144586] caller is debug_smp_processor_id+0x20/0x30 [ 119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3 [ 119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023 [ 119.145053] Call trace: [ 119.145093] dump_backtrace+0x0/0x1a0 [ 119.145122] show_stack+0x18/0x70 [ 119.145141] dump_stack+0xc4/0x11c [ 119.145159] check_preemption_disabled+0x100/0x110 [ 119.145175] debug_smp_processor_id+0x20/0x30 [ 119.145195] sysrq_handle_showallcpus+0x20/0xc0 [ 119.145211] __handle_sysrq+0x8c/0x1a0 [ 119.145227] write_sysrq_trigger+0x94/0x12c [ 119.145247] proc_reg_write+0xa8/0xe4 [ 119.145266] vfs_write+0xec/0x280 [ 119.145282] ksys_write+0x6c/0x100 [ 119.145298] __arm64_sys_write+0x20/0x30 [ 119.145315] el0_svc_common.constprop.0+0x78/0x1e4 [ 119.145332] do_el0_svc+0x24/0x8c [ 119.145348] el0_svc+0x10/0x20 [ 119.145364] el0_sync_handler+0x134/0x140 [ 119.145381] el0_sync+0x180/0x1c0 Cc: [email protected] Cc: [email protected] Fixes: 47cab6a ("debug lockups: Improve lockup detection, fix generic arch fallback") Signed-off-by: Muhammad Usama Anjum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 807252f upstream. Running smb2.rename test from Samba smbtorture suite against a kernel built with lockdep triggers a "possible recursive locking detected" warning. This is because mnt_want_write() is called twice with no mnt_drop_write() in between: -> ksmbd_vfs_mkdir() -> ksmbd_vfs_kern_path_create() -> kern_path_create() -> filename_create() -> mnt_want_write() -> mnt_want_write() Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs helpers that call kern_path_create(). Full lockdep trace below: ============================================ WARNING: possible recursive locking detected 6.6.0-rc5 #775 Not tainted -------------------------------------------- kworker/1:1/32 is trying to acquire lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410 but task is already holding lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_writers#5); lock(sb_writers#5); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/1:1/32: #0: ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #1: ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #2: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 #3: ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260 Cc: [email protected] Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Signed-off-by: Marios Makassikis <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5a22fbc upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: [email protected] Fixes: dc70058 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d8b90d6 upstream. When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] grate-driver#9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: [email protected] Signed-off-by: Ewan D. Milne <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a2e36cd ] This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ grate-driver#10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ grate-driver#10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: <TASK> Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: </TASK> Signed-off-by: Dave Airlie <[email protected]> Tested-by: Danilo Krummrich <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] grate-driver#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] grate-driver#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] grate-driver#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] grate-driver#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb grate-driver#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 grate-driver#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 grate-driver#15 [ffff88aa841efb88] device_del at ffffffff82179d23 grate-driver#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] grate-driver#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] grate-driver#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a grate-driver#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff grate-driver#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 grate-driver#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit fe2b122 upstream. When working on LED support for r8169 I got the following lockdep warning. Easiest way to prevent this scenario seems to be to take the RTNL lock before the trigger_data lock in set_device_name(). ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc2-next-20231124+ #2 Not tainted ------------------------------------------------------ bash/383 is trying to acquire lock: ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev] but task is already holding lock: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 rtnl_lock+0x12/0x20 set_device_name+0xa9/0x120 [ledtrig_netdev] netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 -> #0 (&trigger_data->lock){+.+.}-{3:3}: __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&trigger_data->lock); lock(rtnl_mutex); lock(&trigger_data->lock); *** DEADLOCK *** 8 locks held by bash/383: #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 stack backtrace: CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2 Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023 Call Trace: <TASK> dump_stack_lvl+0x5c/0xd0 dump_stack+0x10/0x20 print_circular_bug+0x2dd/0x410 check_noncircular+0x131/0x150 __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] __mutex_lock+0x9b/0xb50 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __this_cpu_preempt_check+0x13/0x20 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __cancel_work_timer+0x11c/0x1b0 ? __mutex_lock+0x123/0xb50 mutex_lock_nested+0x16/0x20 ? mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 ? preempt_count_add+0x49/0xc0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f269055d034 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034 RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001 RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007 R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000 </TASK> Fixes: d5e0126 ("leds: trigger: netdev: add additional specific link speed mode") Cc: [email protected] Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf grate-driver#47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)ffff80001b894048 insn + 2039 = (struct bpf_insn *)ffff80001b898000 <- end of the page In the build_insn() function, we are trying to access next instruction unconditionally, i.e. `(insn + 1)->imm`. The address lies in the next page and can be not owned by the current process, thus an page fault is inevitable and then segfault. So, let's access next instruction only under `dst = imm64` context. With this fix, we have: # ./test_tag test_tag: OK (40945 tests) Fixes: bbfddb9 ("LoongArch: BPF: Avoid declare variables in switch-case") Tested-by: Tiezhu Yang <[email protected]> Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>

====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-yangp #2289 Not tainted ------------------------------------------------------ kworker/0:2/996 is trying to acquire lock: (srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0 but task is already holding lock: ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at: process_one_work+0x211/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu] svm_range_set_attr+0xd6/0x14c0 [amdgpu] kfd_ioctl+0x1d1/0x630 [amdgpu] __x64_sys_ioctl+0x88/0xc0 -> #2 (&info->lock#2){+.+.}-{3:3}: __mutex_lock+0x99/0xc70 amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu] restore_process_helper+0x22/0x80 [amdgpu] restore_process_worker+0x2d/0xa0 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 -> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 __cancel_work_timer+0x12c/0x1c0 kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu] __mmu_notifier_release+0xad/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 do_exit+0x322/0xb90 do_group_exit+0x37/0xa0 __x64_sys_exit_group+0x18/0x20 do_syscall_64+0x38/0x80 -> #0 (srcu){.+.+}-{0:0}: __lock_acquire+0x1521/0x2510 lock_sync+0x5f/0x90 __synchronize_srcu+0x4f/0x1a0 __mmu_notifier_release+0x128/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 svm_range_deferred_list_work+0x19f/0x350 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 other info that might help us debug this: Chain exists of: srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&svms->deferred_list_work)); lock(&info->lock#2); lock((work_completion)(&svms->deferred_list_work)); sync(srcu); Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>

cunidev added 2 commits March 9, 2020 11:52

Add DTS for Fujitsu M532 (chagall)

d27c113

Still WiP, although several things (USB, LCD panel, backlight, keys) already work. Forked from the Asus TF300T DTS

enable fujitsu dts

eb3a89c

cunidev closed this Mar 9, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Add DTS for Fujitsu M532 (chagall) #3

Add DTS for Fujitsu M532 (chagall) #3

cunidev commented Mar 9, 2020

Add DTS for Fujitsu M532 (chagall) #3

Add DTS for Fujitsu M532 (chagall) #3

Conversation

cunidev commented Mar 9, 2020