Infix v24.10.2

[github-actions[bot]]

Changes

• Support for showing interfaces owned by running containers in the CLI
  command show interfaces. This also adds support for showing the
  peer interface of VETH pairs. Issue cli: improve 'show interfaces' to list container networks #626
• Reboot system on kernel "oops", on "oops" the kernel now panics and
  reboots after 20 seconds. Issue Reboot on kernel failures #740
• Update static factory-config for NanoPi R2S: enable NACM, securing all
  passwords, and enabling iburst for the NTP client. Issue Update R2S factory-config with ntp iburst option #750
• Updated QoS documentation with pictures and more information on VLAN
  interface ingress/egress priority handling, issue Update QoS documentation (VLAN interface ingress/egress priority) #759
• Disable RTC device in Styx device tree, issue Handle broken RTC #794
• Support for saving and restoring system clock from a disk file. This
  allows restoring the system clock to a sane date in case the RTC is
  disabled or does not have a valid time, issue Handle broken RTC #794
• Update device discovery chapter with information on infix.local mDNS
  alias, netbrowse support to discover all local units, and command
  examples for disabling LLDP and mDNS services, issue Update discovery.md on mDNS Information #786
• Updated OSPF documentation to include information on global OSPF
  settings (redistribution, explicit-router-id, etc.), issue Document OSPF redistribute and originate default route #812
• Added information on forwarding of IEEE reserved group addresses
  to bridge section of networking documentation, issue Document bridge support for flooding ieee-reserved (e.g., LLDP) #788
• Add support for bootstrap conditions and early init product overrides
• Styx: enable second Ethernet port LED in device tree, again, rename
  it: yellow -> aux, and make sure it is turned off at boot
• Styx: disable second port LED for the 4xSFP slots, does not work
• Styx: override iitod (LED daemon) with a product specific LED script

Fixes

• Fix DSA Conduit Interface is not Always Detected #685: DSA conduit interface not always detected, randomly causing
  major issues configuring systems with multiple switch cores
• Fix Reenable OpenSSL backend for libssh/libssh2 also on R2S #778: reactivate OpenSSL backend for libssh/libssh2 for NanoPI R2S.
  This fixes a regression in v24.10.0 causing loss of NETCONF support
• Fix rauc: ansi control characters in log messages #809: enable syslog logging for RAUC
• Fix harmless bootstrap log error message on systems without USB ports:
  jq: error (at <stdin>:0): Cannot iterate over null (null)
• Change confusing tc log error message: Error: does not support hardware offload to Skipping $iface, hardware offload not supported.

---

This discussion was created from the release Infix v24.10.2.