TF101 configuration #24
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
TF101 based on tegra20 uses Nuvoton NPCE795-based EC for handling dock in same way t30 transformers use it. Tablet devices are bind in dts separately. TF701T based on tegra114 uses same EC for PAD charger and battery as t30 transformers do. Dock of TF701T is bind as a set of individual devices. Signed-off-by: Svyatoslav Ryhel <[email protected]>
Includes nodes of magnetometer, gyroscope, accelerometer, light-sensor and dock via i2c-hotplug. Signed-off-by: Svyatoslav Ryhel <[email protected]>
Update USB nodes according to downstream. Add missing regulators. Rename vdd_5v0 regulator. Configure WIFI card clocks. Signed-off-by: Svyatoslav Ryhel <[email protected]>
digetx
reviewed
Apr 8, 2021
|
Thanks! |
digetx
pushed a commit
that referenced
this pull request
Jun 9, 2021
When setting up a read or write to the OPB memory space, we must perform
five or six AHB writes. The ordering of these up until the trigger write
does not matter, so use writel_relaxed.
The generated code goes from (Debian GCC 10.2.1-6):
mov r8, r3
mcr 15, 0, sl, cr7, cr10, {4}
str sl, [r6, #20]
mcr 15, 0, sl, cr7, cr10, {4}
str r3, [r6, #24]
mcr 15, 0, sl, cr7, cr10, {4}
str r1, [r6, #28]
mcr 15, 0, sl, cr7, cr10, {4}
str r2, [r6, #32]
mcr 15, 0, sl, cr7, cr10, {4}
mov r1, #1
str r1, [r6, #64] ; 0x40
mcr 15, 0, sl, cr7, cr10, {4}
str r1, [r6, #4]
to this:
str r3, [r7, #20]
str r2, [r7, #24]
str r1, [r7, #28]
str r3, [r7, #64]
mov r8, #0
mcr 15, 0, r8, cr7, cr10, {4}
str r3, [r7, #4]
Signed-off-by: Joel Stanley <[email protected]>
Acked-by: Jeremy Kerr <[email protected]>
Reviewed-by: Eddie James <[email protected]>
Tested-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joel Stanley <[email protected]>
okias
pushed a commit
to okias/linux
that referenced
this pull request
Jun 28, 2021
…em boot up [ Upstream commit 59566b0 ] Booting one of my machines, it triggered the following crash: Kernel/User page tables isolation: enabled ftrace: allocating 36577 entries in 143 pages Starting tracer 'function' BUG: unable to handle page fault for address: ffffffffa000005c #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ grate-driver#24 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 RIP: 0010:text_poke_early+0x4a/0x58 Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff 0 41 57 49 RSP: 0000:ffffffff82003d38 EFLAGS: 00010046 RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005 RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0 R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0 R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0 FS: 0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0 Call Trace: text_poke_bp+0x27/0x64 ? mutex_lock+0x36/0x5d arch_ftrace_update_trampoline+0x287/0x2d5 ? ftrace_replace_code+0x14b/0x160 ? ftrace_update_ftrace_func+0x65/0x6c __register_ftrace_function+0x6d/0x81 ftrace_startup+0x23/0xc1 register_ftrace_function+0x20/0x37 func_set_flag+0x59/0x77 __set_tracer_option.isra.19+0x20/0x3e trace_set_options+0xd6/0x13e apply_trace_boot_options+0x44/0x6d register_tracer+0x19e/0x1ac early_trace_init+0x21b/0x2c9 start_kernel+0x241/0x518 ? load_ucode_intel_bsp+0x21/0x52 secondary_startup_64+0xa4/0xb0 I was able to trigger it on other machines, when I added to the kernel command line of both "ftrace=function" and "trace_options=func_stack_trace". The cause is the "ftrace=function" would register the function tracer and create a trampoline, and it will set it as executable and read-only. Then the "trace_options=func_stack_trace" would then update the same trampoline to include the stack tracer version of the function tracer. But since the trampoline already exists, it updates it with text_poke_bp(). The problem is that text_poke_bp() called while system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not the page mapping, as it would think that the text is still read-write. But in this case it is not, and we take a fault and crash. Instead, lets keep the ftrace trampolines read-write during boot up, and then when the kernel executable text is set to read-only, the ftrace trampolines get set to read-only as well. Link: https://lkml.kernel.org/r/[email protected] Cc: Ingo Molnar <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Fixes: 768ae44 ("x86/ftrace: Use text_poke()") Acked-by: Peter Zijlstra <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
digetx
pushed a commit
that referenced
this pull request
Jul 7, 2021
The "auxtrace_info" and "auxtrace" functions are not set in "tool" member of
"annotate". As a result, perf annotate does not support parsing itrace data.
Before:
# perf record -e arm_spe_0/branch_filter=1/ -a sleep 1
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 20.874 MB perf.data ]
# perf annotate --stdio
Error:
The perf.data data has no samples!
Solution:
1. Add itrace options in help,
2. Set hook functions of "id_index", "auxtrace_info" and "auxtrace" in perf_tool.
After:
# perf record --all-user -e arm_spe_0/branch_filter=1/ ls
Couldn't synthesize bpf events.
perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.010 MB perf.data ]
# perf annotate --stdio
Percent | Source code & Disassembly of libc-2.28.so for branch-miss (1 samples, percent: local period)
------------------------------------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
: 0000000000066180 <__getdelim@@GLIBC_2.17>:
0.00 : 66180: stp x29, x30, [sp, #-96]!
0.00 : 66184: cmp x0, #0x0
0.00 : 66188: ccmp x1, #0x0, #0x4, ne // ne = any
0.00 : 6618c: mov x29, sp
0.00 : 66190: stp x24, x25, [sp, #56]
0.00 : 66194: stp x26, x27, [sp, #72]
0.00 : 66198: str x28, [sp, #88]
0.00 : 6619c: b.eq 66450 <__getdelim@@GLIBC_2.17+0x2d0> // b.none
0.00 : 661a0: stp x22, x23, [x29, #40]
0.00 : 661a4: mov x22, x1
0.00 : 661a8: ldr w1, [x3]
0.00 : 661ac: mov w23, w2
0.00 : 661b0: stp x20, x21, [x29, #24]
0.00 : 661b4: mov x20, x3
0.00 : 661b8: mov x21, x0
0.00 : 661bc: tbnz w1, #15, 66360 <__getdelim@@GLIBC_2.17+0x1e0>
0.00 : 661c0: ldr x0, [x3, #136]
0.00 : 661c4: ldr x2, [x0, #8]
0.00 : 661c8: str x19, [x29, #16]
0.00 : 661cc: mrs x19, tpidr_el0
0.00 : 661d0: sub x19, x19, #0x700
0.00 : 661d4: cmp x2, x19
0.00 : 661d8: b.eq 663f0 <__getdelim@@GLIBC_2.17+0x270> // b.none
0.00 : 661dc: mov w1, #0x1 // #1
0.00 : 661e0: ldaxr w2, [x0]
0.00 : 661e4: cmp w2, #0x0
0.00 : 661e8: b.ne 661f4 <__getdelim@@GLIBC_2.17+0x74> // b.any
0.00 : 661ec: stxr w3, w1, [x0]
0.00 : 661f0: cbnz w3, 661e0 <__getdelim@@GLIBC_2.17+0x60>
0.00 : 661f4: b.ne 66448 <__getdelim@@GLIBC_2.17+0x2c8> // b.any
0.00 : 661f8: ldr x0, [x20, #136]
0.00 : 661fc: ldr w1, [x20]
0.00 : 66200: ldr w2, [x0, #4]
0.00 : 66204: str x19, [x0, #8]
0.00 : 66208: add w2, w2, #0x1
0.00 : 6620c: str w2, [x0, #4]
0.00 : 66210: tbnz w1, #5, 66388 <__getdelim@@GLIBC_2.17+0x208>
0.00 : 66214: ldr x19, [x29, #16]
0.00 : 66218: ldr x0, [x21]
0.00 : 6621c: cbz x0, 66228 <__getdelim@@GLIBC_2.17+0xa8>
0.00 : 66220: ldr x0, [x22]
0.00 : 66224: cbnz x0, 6623c <__getdelim@@GLIBC_2.17+0xbc>
0.00 : 66228: mov x0, #0x78 // #120
0.00 : 6622c: str x0, [x22]
0.00 : 66230: bl 20710 <malloc@plt>
0.00 : 66234: str x0, [x21]
0.00 : 66238: cbz x0, 66428 <__getdelim@@GLIBC_2.17+0x2a8>
0.00 : 6623c: ldr x27, [x20, #8]
0.00 : 66240: str x19, [x29, #16]
0.00 : 66244: ldr x19, [x20, #16]
0.00 : 66248: sub x19, x19, x27
0.00 : 6624c: cmp x19, #0x0
0.00 : 66250: b.le 66398 <__getdelim@@GLIBC_2.17+0x218>
0.00 : 66254: mov x25, #0x0 // #0
0.00 : 66258: b 662d8 <__getdelim@@GLIBC_2.17+0x158>
0.00 : 6625c: nop
0.00 : 66260: add x24, x19, x25
0.00 : 66264: ldr x3, [x22]
0.00 : 66268: add x26, x24, #0x1
0.00 : 6626c: ldr x0, [x21]
0.00 : 66270: cmp x3, x26
0.00 : 66274: b.cs 6629c <__getdelim@@GLIBC_2.17+0x11c> // b.hs, b.nlast
0.00 : 66278: lsl x3, x3, #1
0.00 : 6627c: cmp x3, x26
0.00 : 66280: csel x26, x3, x26, cs // cs = hs, nlast
0.00 : 66284: mov x1, x26
0.00 : 66288: bl 206f0 <realloc@plt>
0.00 : 6628c: cbz x0, 66438 <__getdelim@@GLIBC_2.17+0x2b8>
0.00 : 66290: str x0, [x21]
0.00 : 66294: ldr x27, [x20, #8]
0.00 : 66298: str x26, [x22]
0.00 : 6629c: mov x2, x19
0.00 : 662a0: mov x1, x27
0.00 : 662a4: add x0, x0, x25
0.00 : 662a8: bl 87390 <explicit_bzero@@GLIBC_2.25+0x50>
0.00 : 662ac: ldr x0, [x20, #8]
0.00 : 662b0: add x19, x0, x19
0.00 : 662b4: str x19, [x20, #8]
0.00 : 662b8: cbnz x28, 66410 <__getdelim@@GLIBC_2.17+0x290>
0.00 : 662bc: mov x0, x20
0.00 : 662c0: bl 73b80 <__underflow@@GLIBC_2.17>
0.00 : 662c4: cmn w0, #0x1
0.00 : 662c8: b.eq 66410 <__getdelim@@GLIBC_2.17+0x290> // b.none
0.00 : 662cc: ldp x27, x19, [x20, #8]
0.00 : 662d0: mov x25, x24
0.00 : 662d4: sub x19, x19, x27
0.00 : 662d8: mov x2, x19
0.00 : 662dc: mov w1, w23
0.00 : 662e0: mov x0, x27
0.00 : 662e4: bl 807b0 <memchr@@GLIBC_2.17>
0.00 : 662e8: cmp x0, #0x0
0.00 : 662ec: mov x28, x0
0.00 : 662f0: sub x0, x0, x27
0.00 : 662f4: csinc x19, x19, x0, eq // eq = none
0.00 : 662f8: mov x0, #0x7fffffffffffffff // #9223372036854775807
0.00 : 662fc: sub x0, x0, x25
0.00 : 66300: cmp x19, x0
0.00 : 66304: b.lt 66260 <__getdelim@@GLIBC_2.17+0xe0> // b.tstop
0.00 : 66308: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320>
0.00 : 6630c: ldr x0, [x0, #3624]
0.00 : 66310: mrs x2, tpidr_el0
0.00 : 66314: ldr x19, [x29, #16]
0.00 : 66318: mov w3, #0x4b // #75
0.00 : 6631c: ldr w1, [x20]
0.00 : 66320: mov x24, #0xffffffffffffffff // #-1
0.00 : 66324: str w3, [x2, x0]
0.00 : 66328: tbnz w1, #15, 66340 <__getdelim@@GLIBC_2.17+0x1c0>
0.00 : 6632c: ldr x0, [x20, #136]
0.00 : 66330: ldr w1, [x0, #4]
0.00 : 66334: sub w1, w1, #0x1
0.00 : 66338: str w1, [x0, #4]
0.00 : 6633c: cbz w1, 663b8 <__getdelim@@GLIBC_2.17+0x238>
0.00 : 66340: mov x0, x24
0.00 : 66344: ldr x28, [sp, #88]
0.00 : 66348: ldp x20, x21, [x29, #24]
0.00 : 6634c: ldp x22, x23, [x29, #40]
0.00 : 66350: ldp x24, x25, [sp, #56]
0.00 : 66354: ldp x26, x27, [sp, #72]
0.00 : 66358: ldp x29, x30, [sp], #96
0.00 : 6635c: ret
100.00 : 66360: tbz w1, #5, 66218 <__getdelim@@GLIBC_2.17+0x98>
0.00 : 66364: ldp x20, x21, [x29, #24]
0.00 : 66368: mov x24, #0xffffffffffffffff // #-1
0.00 : 6636c: ldp x22, x23, [x29, #40]
0.00 : 66370: mov x0, x24
0.00 : 66374: ldp x24, x25, [sp, #56]
0.00 : 66378: ldp x26, x27, [sp, #72]
0.00 : 6637c: ldr x28, [sp, #88]
0.00 : 66380: ldp x29, x30, [sp], #96
0.00 : 66384: ret
0.00 : 66388: mov x24, #0xffffffffffffffff // #-1
0.00 : 6638c: ldr x19, [x29, #16]
0.00 : 66390: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66394: nop
0.00 : 66398: mov x0, x20
0.00 : 6639c: bl 73b80 <__underflow@@GLIBC_2.17>
0.00 : 663a0: cmn w0, #0x1
0.00 : 663a4: b.eq 66438 <__getdelim@@GLIBC_2.17+0x2b8> // b.none
0.00 : 663a8: ldp x27, x19, [x20, #8]
0.00 : 663ac: sub x19, x19, x27
0.00 : 663b0: b 66254 <__getdelim@@GLIBC_2.17+0xd4>
0.00 : 663b4: nop
0.00 : 663b8: str xzr, [x0, #8]
0.00 : 663bc: ldxr w2, [x0]
0.00 : 663c0: stlxr w3, w1, [x0]
0.00 : 663c4: cbnz w3, 663bc <__getdelim@@GLIBC_2.17+0x23c>
0.00 : 663c8: cmp w2, #0x1
0.00 : 663cc: b.le 66340 <__getdelim@@GLIBC_2.17+0x1c0>
0.00 : 663d0: mov x1, #0x81 // #129
0.00 : 663d4: mov x2, #0x1 // #1
0.00 : 663d8: mov x3, #0x0 // #0
0.00 : 663dc: mov x8, #0x62 // #98
0.00 : 663e0: svc #0x0
0.00 : 663e4: ldp x20, x21, [x29, #24]
0.00 : 663e8: ldp x22, x23, [x29, #40]
0.00 : 663ec: b 66370 <__getdelim@@GLIBC_2.17+0x1f0>
0.00 : 663f0: ldr w2, [x0, #4]
0.00 : 663f4: add w2, w2, #0x1
0.00 : 663f8: str w2, [x0, #4]
0.00 : 663fc: tbz w1, #5, 66214 <__getdelim@@GLIBC_2.17+0x94>
0.00 : 66400: mov x24, #0xffffffffffffffff // #-1
0.00 : 66404: ldr x19, [x29, #16]
0.00 : 66408: b 66330 <__getdelim@@GLIBC_2.17+0x1b0>
0.00 : 6640c: nop
0.00 : 66410: ldr x0, [x21]
0.00 : 66414: strb wzr, [x0, x24]
0.00 : 66418: ldr w1, [x20]
0.00 : 6641c: ldr x19, [x29, #16]
0.00 : 66420: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66424: nop
0.00 : 66428: mov x24, #0xffffffffffffffff // #-1
0.00 : 6642c: ldr w1, [x20]
0.00 : 66430: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66434: nop
0.00 : 66438: mov x24, #0xffffffffffffffff // #-1
0.00 : 6643c: ldr w1, [x20]
0.00 : 66440: ldr x19, [x29, #16]
0.00 : 66444: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66448: bl e3ba0 <pthread_setcanceltype@@GLIBC_2.17+0x30>
0.00 : 6644c: b 661f8 <__getdelim@@GLIBC_2.17+0x78>
0.00 : 66450: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320>
0.00 : 66454: ldr x0, [x0, #3624]
0.00 : 66458: mrs x1, tpidr_el0
0.00 : 6645c: mov w2, #0x16 // #22
0.00 : 66460: mov x24, #0xffffffffffffffff // #-1
0.00 : 66464: str w2, [x1, x0]
0.00 : 66468: b 66370 <__getdelim@@GLIBC_2.17+0x1f0>
0.00 : 6646c: ldr w1, [x20]
0.00 : 66470: mov x4, x0
0.00 : 66474: tbnz w1, #15, 6648c <__getdelim@@GLIBC_2.17+0x30c>
0.00 : 66478: ldr x0, [x20, #136]
0.00 : 6647c: ldr w1, [x0, #4]
0.00 : 66480: sub w1, w1, #0x1
0.00 : 66484: str w1, [x0, #4]
0.00 : 66488: cbz w1, 66494 <__getdelim@@GLIBC_2.17+0x314>
0.00 : 6648c: mov x0, x4
0.00 : 66490: bl 20e40 <gnu_get_libc_version@@GLIBC_2.17+0x130>
0.00 : 66494: str xzr, [x0, #8]
0.00 : 66498: ldxr w2, [x0]
0.00 : 6649c: stlxr w3, w1, [x0]
0.00 : 664a0: cbnz w3, 66498 <__getdelim@@GLIBC_2.17+0x318>
0.00 : 664a4: cmp w2, #0x1
0.00 : 664a8: b.le 6648c <__getdelim@@GLIBC_2.17+0x30c>
0.00 : 664ac: mov x1, #0x81 // #129
0.00 : 664b0: mov x2, #0x1 // #1
0.00 : 664b4: mov x3, #0x0 // #0
0.00 : 664b8: mov x8, #0x62 // #98
0.00 : 664bc: svc #0x0
0.00 : 664c0: b 6648c <__getdelim@@GLIBC_2.17+0x30c>
Signed-off-by: Yang Jihong <[email protected]>
Tested-by: Leo Yan <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
digetx
pushed a commit
that referenced
this pull request
Oct 22, 2021
The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.