Sync with azure:master #1
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Co-authored-by: Vaibhav Hemant Dixit <[email protected]>
* BGP service script path update and error fix Co-authored-by: Vaibhav Hemant Dixit <[email protected]>
src/sonic-platform-daemons 0231b49...80661c7 (1): Update .gitignore file (#86)
Changes: -- Correct Pattern for VLAN. -- Add Special Test support. -- Add first special test to load VLAN 1-4094. -- Add lanes in ports. -- Make Sure None test gets no output from libyang while config load. [yangModelTesting.py]: INCORRECT VLAN_NAME FIELD IN VLAN TABLE test. Signed-off-by: Praveen Chaudhary [email protected]
…#5195) Add dpkg cache dependency file for Python 3 redis-dump-load wheel package to enable caching
Also align the naming and cleanup of generated output files in test_cfggen.py with the rest of the tests.
`quilt` may leave behind a `.pc/` directory, which will show up in `git status`. Delete it if it is present as part of cleaning up after `quilt` operations.
Calls to sonic-cfggen is CPU expensive. This PR reduces calls to sonic-cfggen to once calle during snmp startup singed-off-by: Tamer Ahmed <[email protected]>
Calls to sonic-cfggen is CPU expensive. This PR reduces calls to sonic-cfggen to one call during startup when running interfaces- config. singed-off-by: Tamer Ahmed <[email protected]>
Calls to sonic-cfggen is CPU expensive. This PR reduces calls to sonic-cfggen to one call during startup when starting dhcp-relay service. singed-off-by: Tamer Ahmed <[email protected]>
Calls to sonic-cfggen is CPU expensive. This PR reduces calls to sonic-cfggen to two calls during startup when starting frr service. singed-off-by: Tamer Ahmed <[email protected]>
Calls to sonic-cfggen is CPU expensive. This PR reduces calls to sonic-cfggen to one call during startup when starting swss service. singed-off-by: Tamer Ahmed <[email protected]>
Calls to sonic-cfggen is CPU expensive. This PR reduces calls to sonic-cfggen to one call during startup when starting radv service. singed-off-by: Tamer Ahmed <[email protected]>
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <[email protected]> Fix the checks in the API is_port_channel_internal
* Add sonic_interface.py in sonic-py-common for sonic interface utilities to keep this SONIC PREFIX naming convention in one place in py-common and all modules/applications use the functions defined here.
Signed-off-by: Petro Bratash <[email protected]>
Argument to write to config-db is not allowed when using template. This PR allows cfggen to write to redis db when using template mode. signed-off-by: Tamer Ahmed <[email protected]>
Update sonic-snmpagent submodule to include below commits: 1a2b62a [Namespace]: Fix SAI_ID key used in cpfcIfTable and csqIfQosGroupStatsTable implementation (#138) d06f00c [pytest/coverage]: add coverage support (#156) 90e9f2e [Namespace]: Simplify sync_d functions to use higher order (#154) b5815d9 [LLDP]: Modify OID index of LLDPRemTableUpdater MIB (#155) d5f2b92 [Multiasic]: Provide namespace support for ipNetToMediaPhysAddress (#129) 166c221 [Namespace]: Fix interface counters in RFC 1213 (#145) Signed-off-by: SuvarnaMeenakshi <[email protected]>
Preparing sonic-cfggen for migration to Python 3. signed-off-by: Tamer Ahmed <[email protected]>
SNMP and Telemetry services are not critical to switch startup. They also cause fast-reboot not to meet timing requirements. In order to delay start those service are associated with systemd timer units, however when hostcfgd initiate service start, it start the service and not the timer. This PR fixes this issue by starting the timer associated with systemd unit. signed-off-by: Tamer Ahmed <[email protected]>
- Ignore directories generated by building Python wheel package - Move all sonic-config-engine ignores from the root .gitignore to src/sonic-config-engine/.gitignore
* Support for Control Plane ACL's for Multi-asic Platforms.
Following changes were done:
1) Moved from using blocking listen() on Config DB to the select() model
via python-swsscommon since we have to wait on event from multiple
config db's
2) Since python-swsscommon is not available on host added libswsscommon and python-swsscommon
and dependent packages in the base image (host enviroment)
3) Made iptables programmed in all namespace using ip netns exec
Signed-off-by: Abhishek Dosi <[email protected]>
* Address Review Comments
Signed-off-by: Abhishek Dosi <[email protected]>
* Fix Review Comments
* Fix Comments
* Added Change for Multi-asic to have iptables
rules to accept internal docker tcp/udp traffic
needed for syslog and redis-tcp connection.
Signed-off-by: Abhishek Dosi <[email protected]>
* Fix Review Comments
* Added more comments on logic.
* Fixed all warning/errors reported by http://pep8online.com/
other than line > 80 characters.
* Fix Comment
Signed-off-by: Abhishek Dosi <[email protected]>
* Verified with swsscommon package. Fix issue for single asic platforms.
* Moved to new python package
* Address Review Comments.
Signed-off-by: Abhishek Dosi <[email protected]>
* Address Review Comments.
- Reverts commit 457674c - Creates "platform.json" for vs docker - Adds test case for port breakout CLI - Explicitly sets admin status of all the VS interfaces to down to be compatible with SWSS test cases, specifically vnet tests and sflow tests Signed-off-by: Sangita Maity <[email protected]>
To declare *tb[] but do not initialize it, it might be very risky. We get iccpd exception during processing arp/nd event. Initialize it to {0};
) startup when doing redis PING since database_config.json getting generated from jinja2 template is still not ready. Signed-off-by: Abhishek Dosi <[email protected]>
Commit e484ae9 introduced systemd .timer unit to hostcfgd. However, when stopping service that has timer, there is possibility that timer is not running and the service would not be stopped. This PR address this situation by handling both .timer and .service units. signed-off-by: Tamer Ahmed <[email protected]>
- fix watchdog timeout units - fix import path for thermal_manager - remove arista bind mounts for docker-snmp - improve arista bind mounts for pmon
…5658) Add sensors labels for human readable output for MSN2010 Signed-off-by: Shlomi Bitton <[email protected]>
…5659) Add sensors labels for human readable output for MSN2100 Signed-off-by: Shlomi Bitton <[email protected]>
…5660) Add sensors labels for human readable output for MSN2410
When a large number of changes occur to the ACL table of Config DB, caclmgrd will get flooded with notifications, and previously, it would regenerate and apply the iptables rules for each change, which is unnecessary, as the iptables rules should only get applied once after the last change notification is received. If the ACL table contains a large number of control plane ACL rules, this could cause a large delay in caclmgrd getting the rules applied. This patch causes caclmgrd to delay updating the iptables rules until it has not received a change notification for at least 0.5 seconds.
Each SFP object inside Chassis will open an SDK client, this is not necessary and SDK client can be shared between SFP objects.
…5661) Add sensors labels for human readable output for MSN2700 Signed-off-by: Shlomi Bitton <[email protected]>
…5662) Add sensors labels for human readable output for MSN2740
…#5664) Fixes sensors labels for human readable output for MSN3420 Signed-off-by: Shlomi Bitton <[email protected]>
…iggering the docker rebuild (#5650) - Fixes the dependency issue in the DPKG dependent SHA calculation. - The dependent SHA value of package is derived from the content of all its dependent packages. SHA_HASH => is an SHA value derived from a module/package dedpendent files ( .flags, .sha and .smsha files) . SHA_VALUE = > is an SHA value derived from a module/package dependent packages(.deb, .whl, etc) Eg, For SNMP docker, SNMP and SNMPD packages are the dependency $(DOCKER_SNMP)_DEPENDS += $(SNMP) $(SNMPD) So, the SHA value calculation of SNMP would include the SHA value of SNMP and SNMPD packages as well. so that any change in the package should trigger the docker rebuild.
…5639) **- Why I did it** I was asked to change "Allow list" prefix-list generation rule. Previously we generated the rules using following method: ``` For each {prefix}/{masklen} we would generate the prefix-rule permit {prefix}/{masklen} ge {masklen}+1 Example: Prefix 1.2.3.4/24 would have following prefix-list entry generated permit 1.2.3.4/24 ge 23 ``` But we discovered the old rule doesn't work for all cases we have. So we introduced the new rule: ``` For ipv4 entry, For mask < 32 , we will add ‘le 32’ to cover all prefix masks to be sent by T0 For mask =32 , we will not add any ‘le mask’ For ipv6 entry, we will add le 128 to cover all the prefix mask to be sent by T0 For mask < 128 , we will add ‘le 128’ to cover all prefix masks to be sent by T0 For mask = 128 , we will not add any ‘le mask’ ``` **- How I did it** I change prefix-list entry generation function. Also I introduced a test for the changed function. **- How to verify it** 1. Build an image and put it on your dut. 2. Create a file test_schema.conf with the test configuration ``` { "BGP_ALLOWED_PREFIXES": { "DEPLOYMENT_ID|0|1010:1010": { "prefixes_v4": [ "10.20.0.0/16", "10.50.1.0/29" ], "prefixes_v6": [ "fc01:10::/64", "fc02:20::/64" ] }, "DEPLOYMENT_ID|0": { "prefixes_v4": [ "10.20.0.0/16", "10.50.1.0/29" ], "prefixes_v6": [ "fc01:10::/64", "fc02:20::/64" ] } } } ``` 3. Apply the configuration by command ``` sonic-cfggen -j test_schema.conf --write-to-db ``` 4. Check that your bgp configuration has following prefix-list entries: ``` admin@str-s6100-acs-1:~$ show runningconfiguration bgp | grep PL_ALLOW ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 10 deny 0.0.0.0/0 le 17 ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 20 permit 127.0.0.1/32 ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 30 permit 10.20.0.0/16 le 32 ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V4 seq 40 permit 10.50.1.0/29 le 32 ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 10 deny 0.0.0.0/0 le 17 ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 20 permit 127.0.0.1/32 ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 30 permit 10.20.0.0/16 le 32 ip prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V4 seq 40 permit 10.50.1.0/29 le 32 ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 10 deny ::/0 le 59 ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 20 deny ::/0 ge 65 ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 30 permit fc01:10::/64 le 128 ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_1010:1010_V6 seq 40 permit fc02:20::/64 le 128 ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 10 deny ::/0 le 59 ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 20 deny ::/0 ge 65 ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 30 permit fc01:10::/64 le 128 ipv6 prefix-list PL_ALLOW_LIST_DEPLOYMENT_ID_0_COMMUNITY_empty_V6 seq 40 permit fc02:20::/64 le 128 ``` Co-authored-by: Pavel Shirshov <[email protected]>
Add support for D6332 platform Signed-off-by: cynthia <[email protected]>
There is currently a bug where messages from swss with priority lower than the current log level are still being counted against the syslog rate limiting threshhold. This leads to rate-limiting in syslog when the rate-limiting conditions have not been met, which causes several sonic-mgmt tests to fail since they are dependent on LogAnalyzer. It also omits potentially useful information from the syslog. Only rate-limiting messages of level INFO and lower allows these tests to pass successfully. Signed-off-by: Lawrence Lee <[email protected]>
Now we are reading base mac, product name from eeprom data, and the data read from eeprom contains multiple "\0" characters at the end, need trim them to make the string clean and display correct.
use correct chassisdb.conf path while bringing up chassis_db service on VoQ modular switch.chassis_db service on VoQ modular switch. resolves #5631 Signed-off-by: Honggang Xu <[email protected]>
…3960) Added files, driver, npu configs for the DellEMC S5296f platform
…5691) Issue was because we were relying on port_alias_asic_map dictionary but that dictionary can't be used as alias name format has changed. Fix the port alias mapping as what is needed. Signed-off-by: Abhishek Dosi <[email protected]>
Platforms .deb-package is not installed into the right directory, because variable PLATFORM was defined previously and variable in the makefile is ignored. https://www.gnu.org/software/make/manual/html_node/Overriding.html
Modified the correct settings for DellEMC S5232 buffer settings. Increased Egress pool size from 28MB to 32 MB.
**- Why I did it**
To introduce dynamic support of BBR functionality into bgpcfgd.
BBR is adding `neighbor PEER_GROUP allowas-in 1' for all BGP peer-groups which points to T0
Now we can add and remove this configuration based on CONFIG_DB entry
**- How I did it**
I introduced a new CONFIG_DB entry:
- table name: "BGP_BBR"
- key value: "all". Currently only "all" is supported, which means that all peer-groups which points to T0s will be updated
- data value: a dictionary: {"status": "status_value"}, where status_value could be either "enabled" or "disabled"
Initially, when bgpcfgd starts, it reads initial BBR status values from the [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR34). Then you can control BBR status by changing "BGP_BBR" table in the CONFIG_DB (see examples below).
bgpcfgd knows what peer-groups to change fron [constants.yml](https://github.com/Azure/sonic-buildimage/pull/5626/files#diff-e6f2fe13a6c276dc2f3b27a5bef79886f9c103194be4fcb28ce57375edf2c23cR39). The dictionary contains peer-group names as keys, and a list of address-families as values. So when bgpcfgd got a request to change the BBR state, it changes the state only for peer-groups listed in the constants.yml dictionary (and only for address families from the peer-group value).
**- How to verify it**
Initially, when we start SONiC FRR has BBR enabled for PEER_V4 and PEER_V6:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
neighbor PEER_V4 allowas-in 1
neighbor PEER_V6 allowas-in 1
```
Then we apply following configuration to the db:
```
admin@str-s6100-acs-1:~$ cat disable.json
{
"BGP_BBR": {
"all": {
"status": "disabled"
}
}
}
admin@str-s6100-acs-1:~$ sonic-cfggen -j disable.json -w
```
The log output are:
```
Oct 14 18:40:22.450322 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'disabled'),))'
Oct 14 18:40:22.450620 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpmWTiuq']'.
Oct 14 18:40:22.681084 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'.
Oct 14 18:40:22.904626 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'.
```
Check FRR configuraiton and see that no allowas parameters are there:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
admin@str-s6100-acs-1:~$
```
Then we apply enabling configuration back:
```
admin@str-s6100-acs-1:~$ cat enable.json
{
"BGP_BBR": {
"all": {
"status": "enabled"
}
}
}
admin@str-s6100-acs-1:~$ sonic-cfggen -j enable.json -w
```
The log output:
```
Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: Received message : '('all', 'SET', (('status', 'enabled'),))'
Oct 14 18:40:41.074720 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-f', '/tmp/tmpDD6SKv']'.
Oct 14 18:40:41.587257 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V4 soft in']'.
Oct 14 18:40:42.042967 str-s6100-acs-1 DEBUG bgp#bgpcfgd: execute command '['vtysh', '-c', 'clear bgp peer-group PEER_V6 soft in']'.
```
Check FRR configuraiton and see that the BBR configuration is back:
```
admin@str-s6100-acs-1:~$ vtysh -c 'show run' | egrep 'PEER_V.? allowas'
neighbor PEER_V4 allowas-in 1
neighbor PEER_V6 allowas-in 1
```
*** The test coverage ***
Below is the test coverage
```
---------- coverage: platform linux2, python 2.7.12-final-0 ----------
Name Stmts Miss Cover
----------------------------------------------------
bgpcfgd/__init__.py 0 0 100%
bgpcfgd/__main__.py 3 3 0%
bgpcfgd/config.py 78 41 47%
bgpcfgd/directory.py 63 34 46%
bgpcfgd/log.py 15 3 80%
bgpcfgd/main.py 51 51 0%
bgpcfgd/manager.py 41 23 44%
bgpcfgd/managers_allow_list.py 385 21 95%
bgpcfgd/managers_bbr.py 76 0 100%
bgpcfgd/managers_bgp.py 193 193 0%
bgpcfgd/managers_db.py 9 9 0%
bgpcfgd/managers_intf.py 33 33 0%
bgpcfgd/managers_setsrc.py 45 45 0%
bgpcfgd/runner.py 39 39 0%
bgpcfgd/template.py 64 11 83%
bgpcfgd/utils.py 32 24 25%
bgpcfgd/vars.py 1 0 100%
----------------------------------------------------
TOTAL 1128 530 53%
```
**- Which release branch to backport (provide reason below if selected)**
- [ ] 201811
- [x] 201911
- [x] 202006
Touch up .gitignore file to properly ignore all files generated when building a Python wheel package
… state was changed. (#5689) **- Why I did it** If we ran the CLI commands `sudo config feature autorestart snmp disabled/enabled` or `sudo config feature autorestart swss disabled/enabled`, then SNMP container will be stopped and started. This behavior was not expected since we updated the `auto_restart` field not update `state` field in `FEATURE` table. The reason behind this issue is that either `state` field or `auto_restart` field was updated, the function `update_feature_state(...)` will be invoked which then starts snmp.timer service. The snmp.timer service will first stop snmp.service and later start snmp.service. In order to solve this issue, the function `update_feature_state(...)` will be only invoked if `state` field in `FEATURE` table was updated. **- How I did it** When the demon `hostcfgd` was activated, all the values of `state` field in `FEATURE` table of each container will be cached. Each time the function `feature_state_handler(...)` is invoked, it will determine whether the `state` field of a container was changed or not. If it was changed, function `update_feature_state(...)` will be invoked and the cached value will also be updated. Otherwise, nothing will be done. **- How to verify it** We can run the CLI commands `sudo config feature autorestart snmp disabled/enabled` or `sudo config feature autorestart swss disabled/enabled` to check whether SNMP container is stopped and started. We also can run the CLI commands `sudo config feature state snmp disabled/enabled` or `sudo config feature state swss disabled/enabled` to check whether the container is stopped and restarted. Signed-off-by: Yong Zhao <[email protected]>
**- Why I did it**
On teamd docker restart, the swss and syncd needs to be restarted as there are dependent resources present.
**- How I did it**
Add the teamd as a dependent service for swss
Updated the docker-wait script to handle service and dependent services separately.
Handle the case of warm-restart for the dependent service
**- How to verify it**
Verified the following scenario's with the following testbed
VM1 ----------------------------[DUT 6100] -----------------------VM2, ping traffic continuous between VMs
1. Stop teamd docker alone
> swss, syncd dockers seen going away
> The LAG reference count error messages seen for a while till swss docker stops.
> Dockers back up.
2. Enable WR mode for teamd. Stop teamd docker alone
> swss, syncd dockers not removed.
> The LAG reference count error messages not seen
> Repeated stop teamd docker test - same result, no effect on swss/syncd.
3. Stop swss docker.
> swss, teamd, syncd goes off - dockers comes back correctly, interfaces up
4. Enable WR mode for swss . Stop swss docker
> swss goes off not affecting syncd/teamd dockers.
5. Config reload
> no reference counter error seen, dockers comes back correctly, with interfaces up
6. Warm reboot, observations below
> swss docker goes off first
> teamd + syncd goes off to the end of WR process.
> dockers comes back up fine.
> ping traffic between VM's was NOT HIT
7. Fast reboot, observations below
> teamd goes off first ( **confirmed swss don't exit here** )
> swss goes off next
> syncd goes away at the end of the FR process
> dockers comes back up fine.
> there is a traffic HIT as per fast-reboot
8. Verified in multi-asic platform, the tests above other than WR/FB scenarios
**- Why I did it** Install all host services and their data files in package format rather than file-by-file **- How I did it** - Create sonic-host-services Python wheel package, currently including procdockerstatsd - Also add the framework for unit tests by adding one simple procdockerstatsd test case - Create sonic-host-services-data Debian package which is responsible for installing the related systemd unit files to control the services in the Python wheel. This package will also be responsible for installing any Jinja2 templates and other data files needed by the host services.
- Enable thermalctld support for our platforms - Fix Chassis.get_num_sfp which had an off by one - Implement read_eeprom and write_eeprom in SfpBase - Refactor of Psus and PsuSlots. Psus they are now detected and metadata reported - Improvements to modular support Co-authored-by: Zhi Yuan Carl Zhao <[email protected]>
#5695) When detecting a new SFP insertion, read its SFP type and DOM capability from EEPROM again. SFP object will be initialized to a certain type even if no SFP present. A case could be: 1. A SFP object is initialized to QSFP type by default when there is no SFP present 2. User insert a SFP with an adapter to this QSFP port 3. The SFP object fail to read EEPROM because it still treats itself as QSFP. This PR fixes this issue.
The orchagent and syncd need to have the same default synchronous mode configuration. This PR adds a template file to translate the default value in CONFIG_DB (empty field) to an explicit mode so that the orchagent and syncd could have the same default mode.
Current implementation of logger class is based on standard python syslog library.
Thus, logger class can be instantiated in different places and share the same context across the entire process.
This means that reducing log severity level will affect other modules which use logging facility.
**- Why I did it**
* To fix syslog implicit min priority override
**- How I did it**
* Added per instance log severity check
**- How to verify it**
1. Run code snippet
```
from sonic_py_common import logger
log1 = logger.Logger(log_identifier='myApp1')
log1.set_min_log_priority_debug()
log1.log_error("=> this is error")
log1.log_warning("=> this is warning")
log1.log_notice("=> this is notice")
log1.log_info("=> this is info")
log1.log_debug("=> this is debug")
log2 = logger.Logger(
log_identifier='myApp2',
log_facility=logger.Logger.LOG_FACILITY_DAEMON,
log_option=(logger.Logger.LOG_OPTION_NDELAY | logger.Logger.LOG_OPTION_PID)
)
log2.log_error("=> this is error")
log2.log_warning("=> this is warning")
log2.log_notice("=> this is notice")
log2.log_info("=> this is info")
log2.log_debug("=> this is debug")
```
2. Sample output:
```
Oct 23 15:08:30.447301 sonic ERR myApp1: => this is error
Oct 23 15:08:30.447908 sonic WARNING myApp1: => this is warning
Oct 23 15:08:30.448305 sonic NOTICE myApp1: => this is notice
Oct 23 15:08:30.448696 sonic INFO myApp1: => this is info
Oct 23 15:08:30.449063 sonic DEBUG myApp1: => this is debug
Oct 23 15:08:30.449442 sonic ERR myApp2[19178]: => this is error
Oct 23 15:08:30.449819 sonic WARNING myApp2[19178]: => this is warning
Oct 23 15:08:30.450183 sonic NOTICE myApp2[19178]: => this is notice
```
Signed-off-by: Nazarii Hnydyn <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
- How I did it
- How to verify it
- Description for the changelog
- A picture of a cute animal (not mandatory but encouraged)