Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
* MKS WiFi preliminary changes * More MKS WiFi * MKS WiFi strings * Fix Z label * Windows LPC Upload for non-admins (MarlinFirmware#20208) Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix DAC setDrvPct (MarlinFirmware#20205) * [cron] Bump distribution date (2020-11-20) * Longer LK Pro / Alfawise PRO board (MarlinFirmware#20185) * Missing header to use suicide() on LVGL UI (MarlinFirmware#20214) * SINGLE_TOUCH_NAVIGATION Follow Up (MarlinFirmware#20213) * Printrboard labels * [cron] Bump distribution date (2020-11-21) * Fix backward Filament (Presence) Sensor pulls (MarlinFirmware#20228) Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix bad SET_FAST_PWM_FREQ calls (MarlinFirmware#20227) * Superscript substitution (MarlinFirmware#20219) Co-authored-by: Scott Lahteine <[email protected]> * Power-Loss cleanup * BTN_ENC_EN for many boards (MarlinFirmware#19890) Enables CHECK_ENCODER_ACTIVE_SIGNAL for many more boards. Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Skip unnecessary (costly) SW Stepper Enable (MarlinFirmware#20218) Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix Load Filament wait (MarlinFirmware#20243) * Proper pullup/pulldown configurability (MarlinFirmware#20242) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-11-22) * Clear menu history for browse media on insert (MarlinFirmware#20236) Co-authored-by: Scott Lahteine <[email protected]> * Put "$3" on all tests * Move core conditionals earlier * Hide docker droppings * [cron] Bump distribution date (2020-11-23) * Fix UBL manual mesh adjust behavior (MarlinFirmware#20248) * Allow Status Message without LCD (MarlinFirmware#20246) * Fix dummy thermistors for Bed, Chamber, Probe (MarlinFirmware#20247) * Fix Z4 in ENABLE/DISABLE_AXIS_Z (MarlinFirmware#20256) This was accidentally broken in PR MarlinFirmware#20218 * [cron] Bump distribution date (2020-11-24) * LCD position in current units (MarlinFirmware#20145) * Set "lcd_move_e" index to fix the label (MarlinFirmware#20263) * Allow cold Filament Load/Unload with M302 P1 (MarlinFirmware#20262) Co-authored-by: Scott Lahteine <[email protected]> * No Z_MULTI_ENDSTOPS when HOMING_Z_WITH_PROBE (MarlinFirmware#20254) * Consistent Probe XY offset type * Cosmetic G29 ABL tweak * [cron] Bump distribution date (2020-11-25) * Update TOUCH_UI_LULZBOT_BIO wrappers * add missing header to use HAS_SD_HOST_DRIVE (MarlinFirmware#20270) * Fix COLOR_UI without TOUCH_SCREEN_CALIBRATION (MarlinFirmware#20269) * [cron] Bump distribution date (2020-11-26) * Probe Offset Wizard improvements (MarlinFirmware#20239) * Reduce warnings, extern "C" cleanup (MarlinFirmware#20279) * Retire HAL for STM32F4 / F7 (MarlinFirmware#20153) * Tweak some pin errors * MKS Robin E3 / E3D v1.1 (MarlinFirmware#20216) * Finish HAL/STM32 cpp wrappers * No auto debug for EEPROM_CHITCHAT * Optimize emergency parser check * Level Corners with Probe option (MarlinFirmware#20241) * [WIP] Fix Probe::offset_xy (MarlinFirmware#20290) Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-11-27) * M808 Repeat Markers (MarlinFirmware#20084) * FIX TMC menu message (MarlinFirmware#20294) * Fix BTT GTR 1.0 endstop/DIAG pins (MarlinFirmware#20296) * Fix G2/G3 arcs > 180° (MarlinFirmware#20292) * Group related homing options (MarlinFirmware#20283) Co-authored-by: Scott Lahteine <[email protected]> * Fix M73 LCD code typo (MarlinFirmware#20300) * [cron] Bump distribution date (2020-11-28) * [cron] Bump distribution date (2020-11-29) * Arc Direction followup for circles (MarlinFirmware#20314) * SKR E3 Turbo Controller Fan (MarlinFirmware#20320) * Fix STM32F1 'freeMemory()' warnings (MarlinFirmware#20319) * Leveling Fade Height default setting (MarlinFirmware#20316) * [cron] Bump distribution date (2020-11-30) * Adjust axis homed / trusted methods (MarlinFirmware#20323) * General cleanup * Increase E3V2 DWIN steps/mm range to 999.9 (MarlinFirmware#20324) * [cron] Bump distribution date (2020-12-01) * Prevent Watchdog reset writing Creality 4.x EEPROM (MarlinFirmware#20328) * Fix E3V2 Control Menu when returning from Info (MarlinFirmware#20338) * Tweak to EEPROM safe delay * [cron] Bump distribution date (2020-12-02) * Level Bed Corners is a sub-menu * Update to STM32 v10, optimize build (MarlinFirmware#20325) * Help hosts when password-locked (MarlinFirmware#20348) * Fix E3V2 DWIN Jerk Menu (MarlinFirmware#20352) * Fix E3V2 DWIN build without CLASSIC_JERK * Fix jerk edits applying to wrong index * Permit SD EEPROM emulation on E3V2 (MarlinFirmware#20353) * [cron] Bump distribution date (2020-12-03) * Fix circle arc condition (MarlinFirmware#20322) * Fix up start, monitor baud (MarlinFirmware#20326) * Consolidate common pin includes * Require minimum PlatformIO version (MarlinFirmware#20361) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-04) * Fix MESH_BED_LEVELING w/o SEGMENT_LEVELED_MOVES (MarlinFirmware#20363) * Loosen E on pause for fila-manipulation (MarlinFirmware#20346) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-05) * Don’t use near keyword as variable name (MarlinFirmware#20374) * Improved Longer3D LKx Pro board (MarlinFirmware#20372) Co-authored-by: mrv96 <[email protected]> * Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368) * Suspend Servos for STM32+NeoPixel (MarlinFirmware#19963) * Add Creality 4.5.2 board (MarlinFirmware#20378) Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-06) * Fix FYSETC S6 I2C EEPROM size (MarlinFirmware#20340) Both V1.2 and V2.0 boards have a 24LC16, which is a 2kB EEPROM. Co-authored-by: PingWin <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Creality 4.5.2 format and fix * Use 'nearby' for 'near' * ExtUI homing / leveling additions * Move G29 3-point startup earlier * Fix STM32F1 SERIAL_GET_TX_BUFFER_FREE * G28 tweaks * G28 followup * Avoid invalid memory optimizations (MarlinFirmware#20389) When building for AVR, merge-all-constants can incorrectly combine constants stored in flash with constants stored in RAM. These have different access requirements, leading to undefined behavior during execution. Co-authored-by: ellensp <[email protected]> * [cron] Bump distribution date (2020-12-07) * Fix fileExists, use openFailed * Watch idle() depth over 5 * More LPC P-string macros * Fix auto#.g file handling, add NO_SD_AUTOSTART (MarlinFirmware#20071) * Shorten Filament Load/Unload Strings to Fit on Graphical Displays (MarlinFirmware#20369) Co-authored-by: ellensp <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> * Allow BTT EXP-MOT be used with Displays that needs only EXP 1 (MarlinFirmware#20396) Co-authored-by: ellensp <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> * [cron] Bump distribution date (2020-12-08) * SPI TFT for STM32F4 boards (MarlinFirmware#20384) * fix pinsDebug for F1 boards * add MKS Robin PRO V2 board - development board * tft spi working with F4 boards * pins formating * sanity check for TFT on supported cores in STM32 * Fix tabs/spaces in pins file Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-09) * Style, spacing, typo cleanup for recent changes * Clarify Delta & SCARA config location (MarlinFirmware#20403) * Allow positive Z nozzle to probe offset (MarlinFirmware#20344) * Allow a positive value for z offset from nozzle to probe without sanity checks * Simplify menu_probe_offset.cpp (HOMING_Z_WITH_PROBE) * Add some more explanation to Configuration Files * Raise after probe_at_point as if homed Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Fix Spindle/Laser Control menu (MarlinFirmware#20347) * Fixes and additions to FTDI EVE Touch UI (MarlinFirmware#20393) - Fixed name conflict with "SUBSCRIPT_TWO" - Fixed rendering bugs in "Leveling Menu" - Only show "Bed Mesh Screen" when UBL is enabled - Removed CocoaPress code from generic "Main Menu" - Removed CocoaPress code from LulzBot Bio "Status" screen - Moved generic "Move Axis" functionality into a base class - Added CocoaPress custom screens: - Status Screen - Unload Cartridge - Load Chocolate - Main Menu - Advanced Settings - XYZ Move (based on "Move Axis" base class) - Extrusion Move (based on "Move Axis" base class) - CocoaPress tweaks to "Temperature" screen - Fix FTDI EVE Touch UI compilation errors when not using leveling. * Move ExtUI ABL mesh edit, limit to bilinear (MarlinFirmware#20381) * Move ExtUI call Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Sebastiaan Dammann <[email protected]> * MKS Robin Pins fixes for STM32 and STM32F1 (MarlinFirmware#20404) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-10) * Clarify "not Interrupt-capable" error message (MarlinFirmware#20419) * Fix UBL Debug Messages (MarlinFirmware#20423) Co-authored-by: ellensp <[email protected]> * [cron] Bump distribution date (2020-12-11) * Z_SENSORLESS sanity checks (MarlinFirmware#20421) Co-authored-by: Jason Smith <[email protected]> * Probe offset wizard fixes (MarlinFirmware#20414) * STOW probe, reverting incorrect earlier change from MarlinFirmware#20344 * Adjust soft endstop disables, to ensure travel below bed functions properly Co-authored-by: FanDjango <[email protected]> * SENSORLESS_PROBING sanity check followup (MarlinFirmware#20438) * [cron] Bump distribution date (2020-12-12) * Better animated boot screen * Fix SDCARD_SORT_ALPHA on Ender 3 V2 (MarlinFirmware#20443) * Add HAS_PIN_27_BOARD for CREALITY_V4 (MarlinFirmware#20446) Co-authored-by: ellensp <[email protected]> * Improve ASSISTED_TRAMMING_WIZARD probe stowing (MarlinFirmware#20437) * When BLTOUCH_HS_MODE enabled, stow pin before user interaction * For all probes, ensure probe stows at end of wizard * [cron] Bump distribution date (2020-12-13) * Probe Offset Wizard followupBack to PROBE_PT_RAISE/separate STOW, make "PROBING" msg appear (MarlinFirmware#20439) * Go back to always use PROBE_PT_RAISE with a discrete stow. This ensures a raise above the bed, while stowing prior to exiting the wizard. * Fix issue preventing text while moving to X/Y position Co-authored-by: FanDjango <[email protected]> * Adjust planner debugging * SHORT_MANUAL_Z_MOVE => FINE_MANUAL_MOVE * [cron] Bump distribution date (2020-12-14) * LPC176x framework update (MarlinFirmware#20469) * [cron] Bump distribution date (2020-12-15) * Fix formatting * Preheat before leveling * Always enable leveling after G28 * Trust that script -x flags will always be set (MarlinFirmware#20453) * Fix M1001 auto-check logic (MarlinFirmware#20456) * Auto-check followup * Please install the EditorConfig plugin * Fix RESTORE_LEVELING_AFTER_G28 (MarlinFirmware#20471) * Creality v4.5.3 (CR-6 SE, CR-6 MAX) (MarlinFirmware#20468) * Update some pins errors * Update some LCD includes * Trust STM32 gcc versions * [cron] Bump distribution date (2020-12-16) * Update Italian language (MarlinFirmware#20480) * Update Hungarian language Co-Authored-By: Zs.Antal <[email protected]> * Update French language (MarlinFirmware#20472) * [cron] Bump distribution date (2020-12-17) * Use homing_feedrate function * Homing feedrates as XYZ array (MarlinFirmware#20426) Co-authored-by: Scott Lahteine <[email protected]> * Fix ZoneStar LCD 2004 buttons (MarlinFirmware#20489) * Make M220 B / R a standard feature (MarlinFirmware#20355) * Balance CI tests (MarlinFirmware#20485) * Fix and optimize MightyBoard (MarlinFirmware#20493) * [cron] Bump distribution date (2020-12-18) * MKS Robin Nano V3 and STM32F4x0Vx Variant (MarlinFirmware#20430) * DOGM: Slow down touchscreen calibration (MarlinFirmware#20454) * [cron] Bump distribution date (2020-12-19) * Rename QUIET_PROBING * Tweaks for pins_BTT_SKR_common.h * [cron] Bump distribution date (2020-12-20) * Let boards set Default TMC Slave Addresses (MarlinFirmware#20498) Co-authored-by: Scott Lahteine <[email protected]> * Minimum temp options for Probing and G12 Nozzle Clean (MarlinFirmware#20383) Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Probe Tare, Probe Activation Switch (MarlinFirmware#20379) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Fix Creality EEPROM watchdog freq. (MarlinFirmware#20510) * Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 (MarlinFirmware#20354) * Languages cleanup * Update Russian and Ukrainian languages (MarlinFirmware#20508) * Fix PIO typo * [cron] Bump distribution date (2020-12-21) * Get E3V2 DWIN `MACHINE_SIZE` from config (MarlinFirmware#20526) * Apply HOME_AFTER_DEACTIVATE for 'G28 O' (MarlinFirmware#20525) * Clean up some pins * Add BTT SKR CR6 board (MarlinFirmware#20522) * Fix G34 compile with bed leveling disabled (MarlinFirmware#20537) * Fix some Russian (MarlinFirmware#20529) * Robin pins followup * Tweak FTDI spacing * Add Tune -> Advanced Settings to FTDI EVE (MarlinFirmware#20532) * [cron] Bump distribution date (2020-12-22) * 12-bit ADC resolution for STM32 (MarlinFirmware#20519) * FTDI EVE custom user menus (MarlinFirmware#20518) * Improve STM32 timer conflict messages (MarlinFirmware#20544) * Fix UBL mesh inset Z position (MarlinFirmware#20538) * Overrides to prevent STM32 timer conflicts (MarlinFirmware#20545) * Improve Touch Calibration screen (MarlinFirmware#20524) * Creality v4.3.1 (Ender 6) board (MarlinFirmware#20512) * Anet ET4 / ET4P and Anet TFT28 / TFT35 (MarlinFirmware#20280) * STM32F1xx support for TFTGLCD (MarlinFirmware#20515) * Unify FYSETC F6 1.3 / 1.4 (MarlinFirmware#20507) Co-authored-by: Scott Lahteine <[email protected]> * Fix G28 leveling state, UBL compile (MarlinFirmware#20499) * Support RGBW on PCA9632 (MarlinFirmware#20455) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-23) * Refactor 'Level Corners with Probe' (MarlinFirmware#20460) Co-authored-by: Scott Lahteine <[email protected]> * Improve plan_arc circle detection (MarlinFirmware#20440) Co-authored-by: Scott Lahteine <[email protected]> * FTDI EVE: Cyrillic font, some minor fixes (MarlinFirmware#20517) * Enhanced Italian language (MarlinFirmware#20551) * Probe Activation Switch followup (MarlinFirmware#20550) * Support ANET_FULL_GRAPHICS_LCD_ALT_WIRING on BTT SKR 1.4 (MarlinFirmware#20427) * Apply ENABLED in ExiUI / FTDI * Remaining Time for FTDI EVE, bp for ExtUI (MarlinFirmware#20549) Co-authored-by: Scott Lahteine <[email protected]> * Add OPTIMIZED_MESH_STORAGE option (for UBL) (MarlinFirmware#20371) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-24) * Move BTT_SKR_CR6 * LVGL and Classic UI for STM32 (MarlinFirmware#20552) * Add "End Repeat Loops" menu item * Fix DOGM status message scrolling (MarlinFirmware#20557) * Fix ST7920 timing for Rumba32, Fysetc S6 (MarlinFirmware#20556) * Fix, clean up FTDI EVE Touch UI (MarlinFirmware#20466) Co-Authored-By: Marcio T. <[email protected]> * Apply NO_MOTION_BEFORE_HOMING to joystick motion (MarlinFirmware#20462) Co-authored-by: Scott Lahteine <[email protected]> * Cutter Power in percent format (MarlinFirmware#20410) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Luu Lac <[email protected]> * [cron] Bump distribution date (2020-12-25) * [cron] Bump distribution date (2020-12-26) * [cron] Bump distribution date (2020-12-27) * Fix SPINDLE_LASER_FREQUENCY (MarlinFirmware#20509) * Fix some comments * Remove CREALITY_TOUCH * Add probe_switch_activated * Init tare pin once * [cron] Bump distribution date (2020-12-28) * Validate defined probe points (MarlinFirmware#20572) * General cleanup * Allow define HOMING_FEEDRATE_(XY|Z) * Remove URL scheme * Small / Large Boot Screen option for TFT_COLOR_UI (MarlinFirmware#20578) * Better defaults, compatibility for SDIO + STM32 (MarlinFirmware#20570) * Fix Menu Mixer for Color UI (MarlinFirmware#20566) * Use ADC_RESOLUTION 12 for all STM32 (MarlinFirmware#20562) * Fix LVGL_UI G-code preview (MarlinFirmware#20564) * Fix Change Filament menu actions (MarlinFirmware#20565) Co-authored-by: Scott Lahteine <[email protected]> * Menu item index followup * [cron] Bump distribution date (2020-12-29) * Apply SHOW_BOOTSCREEN to TFT_COLOR_UI (MarlinFirmware#20586) * LVGL G-code preview. Legacy MKS WiFi Cura plugin compatibility (MarlinFirmware#20589) * Clarify sanity-check for custom status bitmap (MarlinFirmware#20588) * Pins, comment cleanup * USB FD via native USB Host + MSC (MarlinFirmware#20571) * Support 4.3" (480x272) Color UI display (MarlinFirmware#20334) * [cron] Bump distribution date (2020-12-30) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Vitaliy <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Orel <[email protected]> Co-authored-by: thinkyhead <[email protected]> Co-authored-by: Ajtak <[email protected]> Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Simone Primarosa <[email protected]> Co-authored-by: Gurmeet Athwal <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: qwewer0 <[email protected]> Co-authored-by: rdhoggattjr <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: pseudex <[email protected]> Co-authored-by: swissnorp <[email protected]> Co-authored-by: mks-viva <[email protected]> Co-authored-by: wmariz <[email protected]> Co-authored-by: Štěpán Dalecký <[email protected]> Co-authored-by: BsCmOD <[email protected]> Co-authored-by: yysh12 <[email protected]> Co-authored-by: Sergey1560 <[email protected]> Co-authored-by: Thomas Niccolo Reyes <[email protected]> Co-authored-by: Alexander D. Kanevskiy <[email protected]> Co-authored-by: Mathias Rasmussen <[email protected]> Co-authored-by: Luu Lac <[email protected]> Co-authored-by: Belin Fieldson <[email protected]> Co-authored-by: Tanguy Pruvot <[email protected]> Co-authored-by: mrv96 <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: LinFor <[email protected]> Co-authored-by: PingWin <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Mike La Spina <[email protected]> Co-authored-by: Marcio T <[email protected]> Co-authored-by: Sebastiaan Dammann <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: elasticdotventures <[email protected]> Co-authored-by: FanDjango <[email protected]> Co-authored-by: FanDjango <[email protected]> Co-authored-by: leodoener <[email protected]> Co-authored-by: Chris Pepper <[email protected]> Co-authored-by: kisslorand <[email protected]> Co-authored-by: JoAnn Manges <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: Zs.Antal <[email protected]> Co-authored-by: rafaljot <[email protected]> Co-authored-by: nb-rapidia <[email protected]> Co-authored-by: grauerfuchs <[email protected]> Co-authored-by: Foxies <[email protected]> Co-authored-by: Serhiy-K <[email protected]> Co-authored-by: Dick Streefland <[email protected]> Co-authored-by: cr20-123 <[email protected]> Co-authored-by: X-Ryl669 <[email protected]> Co-authored-by: Sean McGroty <[email protected]> Co-authored-by: Jan Krajdl <[email protected]> Co-authored-by: Darren Peter <[email protected]> Co-authored-by: ubik2 <[email protected]> Co-authored-by: Vi B-P <[email protected]> Co-authored-by: Ashammaru <[email protected]>
- Loading branch information
62 people
authored
Dec 30, 2020
1 parent
4914ac9
commit 0ab0c4b