Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Fix TMC_HOME_PHASE divide by zero #20368

Merged
merged 1 commit into from
Dec 5, 2020
Merged

Fix TMC_HOME_PHASE divide by zero #20368

merged 1 commit into from
Dec 5, 2020

Conversation

sjasonsmith
Copy link
Contributor

Description

Fix a divide by zero warning when TMC_HOME_PHASE is enabled and X, Y, or Z are set to 0 microsteps.

Marlin\src\module\motion.cpp: In function 'void backout_to_tmc_homing_phase(AxisEnum)':
Marlin\src\module\motion.cpp:1496:31: warning: division by zero [-Wdiv-by-zero]
 1496 |           phasePerUStep = 256 / (X_MICROSTEPS);

Benefits

Allow use without microstepping. It most likely rebooted the controller when this happened, or did something undefined at compile time.

Configurations

I discovered when compiling the configs from #20366

Related Issues

N/A

@thinkyhead thinkyhead merged commit 21ee7b1 into MarlinFirmware:bugfix-2.0.x Dec 5, 2020
thinkyhead pushed a commit that referenced this pull request Dec 5, 2020
@sjasonsmith @thinkyhead
Fix TMC_HOME_PHASE divide by zero (#20368)
eb254ef
mriscoc pushed a commit to mriscoc/Marlin that referenced this pull request Dec 5, 2020
@sjasonsmith @mriscoc
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
910f24f
Kannix2005 pushed a commit to Kannix2005/Marlin-1 that referenced this pull request Dec 7, 2020
@sjasonsmith @Kannix2005
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
bec9f50
vgadreau pushed a commit to vgadreau/Marlin that referenced this pull request Dec 9, 2020
@sjasonsmith @vgadreau
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
b6b5da3
@sjasonsmith sjasonsmith deleted the PR/TMC_HOME_PHASE_Divide_By_Zero branch December 22, 2020 20:10
RFBomb pushed a commit to RFBomb/Marlin that referenced this pull request Dec 23, 2020
@sjasonsmith @RFBomb
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
6eebedc
TheMichalcinOfficial added a commit to TheMichalcinOfficial/Marlin that referenced this pull request Dec 28, 2020
@TheMichalcinOfficial @thinkyhead
@GMagician @bosd @GadgetAngel @rhapsodyv @ellensp @onfoot @Quas7 @Vittaly @0r31 @Ajtak @Misterke @simonepri @guruathwal @sjasonsmith @qwewer0 @rdhoggattjr @pseudex @swissnorp @mks-viva @wmariz @daleckystepan @BsCmOD @Sergey1560 @niccoreyes @kad @mathiasvr @shitcreek @thebelin @tpruvot @mrv96 @InsanityAutomation @LinFor @thisiskeithb @descipher @marciot @Sebazzz @elasticdotventures @FanDjango @leodoener @p3p @kisslorand @AntoszHUN @rafaljot @nb-rapidia @grauerfuchs @Foxies-CSTL @Serhiy-K @streef @X-Ryl669 @smcgroty @spamik @bizzehdee @ubik2 @violetbp @Ashammaru
Bugfix 2.0.x (#2)
df63d2e 
* USB Media Host followup

Restore HAS_SHARED_MEDIA

* SMUFF (MMU2 clone) support (MarlinFirmware#19912)

* [cron] Bump distribution date (2020-11-19)

* Fix broken #include (MarlinFirmware#20193)

* Use RTD for MAX31865 reading (MarlinFirmware#20188)

* Abort print on media removal (MarlinFirmware#20200)

* Fix Filament Change menu item labels (MarlinFirmware#20201)

* Remaining Time followup (MarlinFirmware#20199)

* Fix GTR NeoPixel pin with FYSETC Mini12864 (MarlinFirmware#20203)

* Reduce RAM usage for TFT Color UI on SGen-L V2 (MarlinFirmware#20209)

* Add Thermistor 20-21 notes (MarlinFirmware#19246)

* MKS WiFi preliminary changes

* More MKS WiFi

* MKS WiFi strings

* Fix Z label

* Windows LPC Upload for non-admins (MarlinFirmware#20208)

Co-authored-by: Victor Mateus Oliveira <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* Fix DAC setDrvPct (MarlinFirmware#20205)

* [cron] Bump distribution date (2020-11-20)

* Longer LK Pro / Alfawise PRO board (MarlinFirmware#20185)

* Missing header to use suicide() on LVGL UI (MarlinFirmware#20214)

* SINGLE_TOUCH_NAVIGATION Follow Up (MarlinFirmware#20213)

* Printrboard labels

* [cron] Bump distribution date (2020-11-21)

* Fix backward Filament (Presence) Sensor pulls (MarlinFirmware#20228)

Co-authored-by: Kurt Haenen <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* Fix bad SET_FAST_PWM_FREQ calls (MarlinFirmware#20227)

* Superscript substitution (MarlinFirmware#20219)

Co-authored-by: Scott Lahteine <[email protected]>

* Power-Loss cleanup

* BTN_ENC_EN for many boards (MarlinFirmware#19890)

Enables CHECK_ENCODER_ACTIVE_SIGNAL for many more boards.

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* Skip unnecessary (costly) SW Stepper Enable (MarlinFirmware#20218)

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* Fix Load Filament wait (MarlinFirmware#20243)

* Proper pullup/pulldown configurability (MarlinFirmware#20242)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-11-22)

* Clear menu history for browse media on insert (MarlinFirmware#20236)

Co-authored-by: Scott Lahteine <[email protected]>

* Put "$3" on all tests

* Move core conditionals earlier

* Hide docker droppings

* [cron] Bump distribution date (2020-11-23)

* Fix UBL manual mesh adjust behavior (MarlinFirmware#20248)

* Allow Status Message without LCD (MarlinFirmware#20246)

* Fix dummy thermistors for Bed, Chamber, Probe (MarlinFirmware#20247)

* Fix Z4 in ENABLE/DISABLE_AXIS_Z (MarlinFirmware#20256)

This was accidentally broken in PR MarlinFirmware#20218

* [cron] Bump distribution date (2020-11-24)

* LCD position in current units (MarlinFirmware#20145)

* Set "lcd_move_e" index to fix the label (MarlinFirmware#20263)

* Allow cold Filament Load/Unload with M302 P1 (MarlinFirmware#20262)

Co-authored-by: Scott Lahteine <[email protected]>

* No Z_MULTI_ENDSTOPS when HOMING_Z_WITH_PROBE (MarlinFirmware#20254)

* Consistent Probe XY offset type

* Cosmetic G29 ABL tweak

* [cron] Bump distribution date (2020-11-25)

* Update TOUCH_UI_LULZBOT_BIO wrappers

* add missing header to use HAS_SD_HOST_DRIVE (MarlinFirmware#20270)

* Fix COLOR_UI without TOUCH_SCREEN_CALIBRATION (MarlinFirmware#20269)

* [cron] Bump distribution date (2020-11-26)

* Probe Offset Wizard improvements (MarlinFirmware#20239)

* Reduce warnings, extern "C" cleanup (MarlinFirmware#20279)

* Retire HAL for STM32F4 / F7 (MarlinFirmware#20153)

* Tweak some pin errors

* MKS Robin E3 / E3D v1.1 (MarlinFirmware#20216)

* Finish HAL/STM32 cpp wrappers

* No auto debug for EEPROM_CHITCHAT

* Optimize emergency parser check

* Level Corners with Probe option (MarlinFirmware#20241)

* [WIP] Fix Probe::offset_xy (MarlinFirmware#20290)

Co-authored-by: Jason Smith <[email protected]>

* [cron] Bump distribution date (2020-11-27)

* M808 Repeat Markers (MarlinFirmware#20084)

* FIX TMC menu message (MarlinFirmware#20294)

* Fix BTT GTR 1.0 endstop/DIAG pins (MarlinFirmware#20296)

* Fix G2/G3 arcs > 180° (MarlinFirmware#20292)

* Group related homing options (MarlinFirmware#20283)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix M73 LCD code typo (MarlinFirmware#20300)

* [cron] Bump distribution date (2020-11-28)

* [cron] Bump distribution date (2020-11-29)

* Arc Direction followup for circles (MarlinFirmware#20314)

* SKR E3 Turbo Controller Fan (MarlinFirmware#20320)

* Fix STM32F1 'freeMemory()' warnings (MarlinFirmware#20319)

* Leveling Fade Height default setting (MarlinFirmware#20316)

* [cron] Bump distribution date (2020-11-30)

* Adjust axis homed / trusted methods (MarlinFirmware#20323)

* General cleanup

* Increase E3V2 DWIN steps/mm range to 999.9 (MarlinFirmware#20324)

* [cron] Bump distribution date (2020-12-01)

* Prevent Watchdog reset writing Creality 4.x EEPROM (MarlinFirmware#20328)

* Fix E3V2 Control Menu when returning from Info (MarlinFirmware#20338)

* Tweak to EEPROM safe delay

* [cron] Bump distribution date (2020-12-02)

* Level Bed Corners is a sub-menu

* Update to STM32 v10, optimize build (MarlinFirmware#20325)

* Help hosts when password-locked (MarlinFirmware#20348)

* Fix E3V2 DWIN Jerk Menu (MarlinFirmware#20352)

* Fix E3V2 DWIN build without CLASSIC_JERK
* Fix jerk edits applying to wrong index

* Permit SD EEPROM emulation on E3V2 (MarlinFirmware#20353)

* [cron] Bump distribution date (2020-12-03)

* Fix circle arc condition (MarlinFirmware#20322)

* Fix up start, monitor baud (MarlinFirmware#20326)

* Consolidate common pin includes

* Require minimum PlatformIO version (MarlinFirmware#20361)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* [cron] Bump distribution date (2020-12-04)

* Fix MESH_BED_LEVELING w/o SEGMENT_LEVELED_MOVES (MarlinFirmware#20363)

* Loosen E on pause for fila-manipulation (MarlinFirmware#20346)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-12-05)

* Don’t use near keyword as variable name (MarlinFirmware#20374)

* Improved Longer3D LKx Pro board (MarlinFirmware#20372)

Co-authored-by: mrv96 <[email protected]>

* Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)

* Suspend Servos for STM32+NeoPixel (MarlinFirmware#19963)

* Add Creality 4.5.2 board (MarlinFirmware#20378)

Co-authored-by: Jason Smith <[email protected]>

* [cron] Bump distribution date (2020-12-06)

* Fix FYSETC S6 I2C EEPROM size (MarlinFirmware#20340)

Both V1.2 and V2.0 boards have a 24LC16, which is a 2kB EEPROM.

Co-authored-by: PingWin <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* Creality 4.5.2 format and fix

* Use 'nearby' for 'near'

* ExtUI homing / leveling additions

* Move G29 3-point startup earlier

* Fix STM32F1 SERIAL_GET_TX_BUFFER_FREE

* G28 tweaks

* G28 followup

* Avoid invalid memory optimizations (MarlinFirmware#20389)

When building for AVR, merge-all-constants can incorrectly combine constants stored in flash with constants stored in RAM. These have different access requirements, leading to undefined behavior during execution.
Co-authored-by: ellensp <[email protected]>

* [cron] Bump distribution date (2020-12-07)

* Fix fileExists, use openFailed

* Watch idle() depth over 5

* More LPC P-string macros

* Fix auto#.g file handling, add NO_SD_AUTOSTART (MarlinFirmware#20071)

* Shorten Filament Load/Unload Strings to Fit on Graphical Displays (MarlinFirmware#20369)

Co-authored-by: ellensp <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>

* Allow BTT EXP-MOT be used with Displays that needs only EXP 1 (MarlinFirmware#20396)

Co-authored-by: ellensp <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>

* [cron] Bump distribution date (2020-12-08)

* SPI TFT for STM32F4 boards (MarlinFirmware#20384)

* fix pinsDebug for F1 boards

* add MKS Robin PRO V2 board - development board

* tft spi working with F4 boards

* pins formating

* sanity check for TFT on supported cores in STM32

* Fix tabs/spaces in pins file

Co-authored-by: Jason Smith <[email protected]>

* [cron] Bump distribution date (2020-12-09)

* Style, spacing, typo cleanup for recent changes

* Clarify Delta & SCARA config location (MarlinFirmware#20403)

* Allow positive Z nozzle to probe offset (MarlinFirmware#20344)

* Allow a positive value for z offset from nozzle to probe without sanity checks
* Simplify menu_probe_offset.cpp (HOMING_Z_WITH_PROBE)
* Add some more explanation to Configuration Files
* Raise after probe_at_point as if homed

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* Fix Spindle/Laser Control menu (MarlinFirmware#20347)

* Fixes and additions to FTDI EVE Touch UI (MarlinFirmware#20393)

- Fixed name conflict with "SUBSCRIPT_TWO"
- Fixed rendering bugs in "Leveling Menu"
- Only show "Bed Mesh Screen" when UBL is enabled
- Removed CocoaPress code from generic "Main Menu"
- Removed CocoaPress code from LulzBot Bio "Status" screen
- Moved generic "Move Axis" functionality into a base class
- Added CocoaPress custom screens:
   - Status Screen
   - Unload Cartridge
   - Load Chocolate
   - Main Menu
   - Advanced Settings
   - XYZ Move (based on "Move Axis" base class)
   - Extrusion Move (based on "Move Axis" base class)
- CocoaPress tweaks to "Temperature" screen
- Fix FTDI EVE Touch UI compilation errors when not using leveling.

* Move ExtUI ABL mesh edit, limit to bilinear (MarlinFirmware#20381)

* Move ExtUI call

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>
Co-authored-by: Sebastiaan Dammann <[email protected]>

* MKS Robin Pins fixes for STM32 and STM32F1 (MarlinFirmware#20404)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-12-10)

* Clarify "not Interrupt-capable" error message (MarlinFirmware#20419)

* Fix UBL Debug Messages (MarlinFirmware#20423)

Co-authored-by: ellensp <[email protected]>

* [cron] Bump distribution date (2020-12-11)

* Z_SENSORLESS sanity checks (MarlinFirmware#20421)

Co-authored-by: Jason Smith <[email protected]>

* Probe offset wizard fixes (MarlinFirmware#20414)

* STOW probe, reverting incorrect earlier change from MarlinFirmware#20344
* Adjust soft endstop disables, to ensure travel below bed functions properly

Co-authored-by: FanDjango <[email protected]>

* SENSORLESS_PROBING sanity check followup (MarlinFirmware#20438)

* [cron] Bump distribution date (2020-12-12)

* Better animated boot screen

* Fix SDCARD_SORT_ALPHA on Ender 3 V2 (MarlinFirmware#20443)

* Add HAS_PIN_27_BOARD for CREALITY_V4 (MarlinFirmware#20446)

Co-authored-by: ellensp <[email protected]>

* Improve ASSISTED_TRAMMING_WIZARD probe stowing (MarlinFirmware#20437)

* When BLTOUCH_HS_MODE enabled, stow pin before user interaction
* For all probes, ensure probe stows at end of wizard

* [cron] Bump distribution date (2020-12-13)

* Probe Offset Wizard followupBack to PROBE_PT_RAISE/separate STOW, make "PROBING" msg appear (MarlinFirmware#20439)

* Go back to always use PROBE_PT_RAISE with a discrete stow. This ensures a raise above the bed, while stowing prior to exiting the wizard.
* Fix issue preventing text while moving to X/Y position
Co-authored-by: FanDjango <[email protected]>

* Adjust planner debugging

* SHORT_MANUAL_Z_MOVE => FINE_MANUAL_MOVE

* [cron] Bump distribution date (2020-12-14)

* LPC176x framework update (MarlinFirmware#20469)

* [cron] Bump distribution date (2020-12-15)

* Fix formatting

* Preheat before leveling

* Always enable leveling after G28

* Trust that script -x flags will always be set (MarlinFirmware#20453)

* Fix M1001 auto-check logic (MarlinFirmware#20456)

* Auto-check followup

* Please install the EditorConfig plugin

* Fix RESTORE_LEVELING_AFTER_G28 (MarlinFirmware#20471)

* Creality v4.5.3 (CR-6 SE, CR-6 MAX) (MarlinFirmware#20468)

* Update some pins errors

* Update some LCD includes

* Trust STM32 gcc versions

* [cron] Bump distribution date (2020-12-16)

* Update Italian language (MarlinFirmware#20480)

* Update Hungarian language

Co-Authored-By: Zs.Antal <[email protected]>

* Update French language (MarlinFirmware#20472)

* [cron] Bump distribution date (2020-12-17)

* Use homing_feedrate function

* Homing feedrates as XYZ array (MarlinFirmware#20426)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix ZoneStar LCD 2004 buttons (MarlinFirmware#20489)

* Make M220 B / R a standard feature (MarlinFirmware#20355)

* Balance CI tests (MarlinFirmware#20485)

* Fix and optimize MightyBoard (MarlinFirmware#20493)

* [cron] Bump distribution date (2020-12-18)

* MKS Robin Nano V3 and STM32F4x0Vx Variant (MarlinFirmware#20430)

* DOGM: Slow down touchscreen calibration (MarlinFirmware#20454)

* [cron] Bump distribution date (2020-12-19)

* Rename QUIET_PROBING

* Tweaks for pins_BTT_SKR_common.h

* [cron] Bump distribution date (2020-12-20)

* Let boards set Default TMC Slave Addresses (MarlinFirmware#20498)

Co-authored-by: Scott Lahteine <[email protected]>

* Minimum temp options for Probing and G12 Nozzle Clean (MarlinFirmware#20383)

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* Probe Tare, Probe Activation Switch (MarlinFirmware#20379)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* Fix Creality EEPROM watchdog freq. (MarlinFirmware#20510)

* Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 (MarlinFirmware#20354)

* Languages cleanup

* Update Russian and Ukrainian languages (MarlinFirmware#20508)

* Fix PIO typo

* [cron] Bump distribution date (2020-12-21)

* Get E3V2 DWIN `MACHINE_SIZE` from config (MarlinFirmware#20526)

* Apply HOME_AFTER_DEACTIVATE for 'G28 O' (MarlinFirmware#20525)

* Clean up some pins

* Add BTT SKR CR6 board (MarlinFirmware#20522)

* Fix G34 compile with bed leveling disabled (MarlinFirmware#20537)

* Fix some Russian (MarlinFirmware#20529)

* Robin pins followup

* Tweak FTDI spacing

* Add Tune -> Advanced Settings to FTDI EVE (MarlinFirmware#20532)

* [cron] Bump distribution date (2020-12-22)

* 12-bit ADC resolution for STM32 (MarlinFirmware#20519)

* FTDI EVE custom user menus (MarlinFirmware#20518)

* Improve STM32 timer conflict messages (MarlinFirmware#20544)

* Fix UBL mesh inset Z position (MarlinFirmware#20538)

* Overrides to prevent STM32 timer conflicts (MarlinFirmware#20545)

* Improve Touch Calibration screen (MarlinFirmware#20524)

* Creality v4.3.1 (Ender 6) board (MarlinFirmware#20512)

* Anet ET4 / ET4P and Anet TFT28 / TFT35 (MarlinFirmware#20280)

* STM32F1xx support for TFTGLCD (MarlinFirmware#20515)

* Unify FYSETC F6 1.3 / 1.4 (MarlinFirmware#20507)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix G28 leveling state, UBL compile (MarlinFirmware#20499)

* Support RGBW on PCA9632 (MarlinFirmware#20455)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-12-23)

* Refactor 'Level Corners with Probe' (MarlinFirmware#20460)

Co-authored-by: Scott Lahteine <[email protected]>

* Improve plan_arc circle detection (MarlinFirmware#20440)

Co-authored-by: Scott Lahteine <[email protected]>

* FTDI EVE: Cyrillic font, some minor fixes (MarlinFirmware#20517)

* Enhanced Italian language (MarlinFirmware#20551)

* Probe Activation Switch followup (MarlinFirmware#20550)

* Support ANET_FULL_GRAPHICS_LCD_ALT_WIRING on BTT SKR 1.4 (MarlinFirmware#20427)

* Apply ENABLED in ExiUI / FTDI

* Remaining Time for FTDI EVE, bp for ExtUI (MarlinFirmware#20549)

Co-authored-by: Scott Lahteine <[email protected]>

* Add OPTIMIZED_MESH_STORAGE option (for UBL) (MarlinFirmware#20371)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-12-24)

* Move BTT_SKR_CR6

* LVGL and Classic UI for STM32 (MarlinFirmware#20552)

* Add "End Repeat Loops" menu item

* Fix DOGM status message scrolling (MarlinFirmware#20557)

* Fix ST7920 timing for Rumba32, Fysetc S6 (MarlinFirmware#20556)

* Fix, clean up FTDI EVE Touch UI (MarlinFirmware#20466)

Co-Authored-By: Marcio T. <[email protected]>

* Apply NO_MOTION_BEFORE_HOMING to joystick motion (MarlinFirmware#20462)

Co-authored-by: Scott Lahteine <[email protected]>

* Cutter Power in percent format (MarlinFirmware#20410)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Luu Lac <[email protected]>

* [cron] Bump distribution date (2020-12-25)

* [cron] Bump distribution date (2020-12-26)

* [cron] Bump distribution date (2020-12-27)

* Fix SPINDLE_LASER_FREQUENCY (MarlinFirmware#20509)

* Fix some comments

* Remove CREALITY_TOUCH

* Add probe_switch_activated

* Init tare pin once

* [cron] Bump distribution date (2020-12-28)

* Validate defined probe points (MarlinFirmware#20572)

* General cleanup

* Allow define HOMING_FEEDRATE_(XY|Z)

* Remove URL scheme

* Small / Large Boot Screen option for TFT_COLOR_UI (MarlinFirmware#20578)

* Better defaults, compatibility for SDIO + STM32 (MarlinFirmware#20570)

* Fix Menu Mixer for Color UI (MarlinFirmware#20566)

* Use ADC_RESOLUTION 12 for all STM32 (MarlinFirmware#20562)

* Fix LVGL_UI G-code preview (MarlinFirmware#20564)

* Fix Change Filament menu actions (MarlinFirmware#20565)

Co-authored-by: Scott Lahteine <[email protected]>

* Menu item index followup

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: bosd <[email protected]>
Co-authored-by: JoAnn Manges <[email protected]>
Co-authored-by: Victor Oliveira <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Maciej Rutkowski <[email protected]>
Co-authored-by: Till <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Vitaliy <[email protected]>
Co-authored-by: Orel <[email protected]>
Co-authored-by: Ajtak <[email protected]>
Co-authored-by: Kurt Haenen <[email protected]>
Co-authored-by: Kurt Haenen <[email protected]>
Co-authored-by: Simone Primarosa <[email protected]>
Co-authored-by: Gurmeet Athwal <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: qwewer0 <[email protected]>
Co-authored-by: rdhoggattjr <[email protected]>
Co-authored-by: pseudex <[email protected]>
Co-authored-by: swissnorp <[email protected]>
Co-authored-by: mks-viva <[email protected]>
Co-authored-by: wmariz <[email protected]>
Co-authored-by: Štěpán Dalecký <[email protected]>
Co-authored-by: BsCmOD <[email protected]>
Co-authored-by: yysh12 <[email protected]>
Co-authored-by: Sergey1560 <[email protected]>
Co-authored-by: Thomas Niccolo Reyes <[email protected]>
Co-authored-by: Alexander D. Kanevskiy <[email protected]>
Co-authored-by: Mathias Rasmussen <[email protected]>
Co-authored-by: Luu Lac <[email protected]>
Co-authored-by: Belin Fieldson <[email protected]>
Co-authored-by: Tanguy Pruvot <[email protected]>
Co-authored-by: mrv96 <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: LinFor <[email protected]>
Co-authored-by: PingWin <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Mike La Spina <[email protected]>
Co-authored-by: Marcio T <[email protected]>
Co-authored-by: Sebastiaan Dammann <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: elasticdotventures <[email protected]>
Co-authored-by: FanDjango <[email protected]>
Co-authored-by: FanDjango <[email protected]>
Co-authored-by: leodoener <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: kisslorand <[email protected]>
Co-authored-by: Zs.Antal <[email protected]>
Co-authored-by: rafaljot <[email protected]>
Co-authored-by: nb-rapidia <[email protected]>
Co-authored-by: grauerfuchs <[email protected]>
Co-authored-by: Foxies <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: Dick Streefland <[email protected]>
Co-authored-by: cr20-123 <[email protected]>
Co-authored-by: X-Ryl669 <[email protected]>
Co-authored-by: Sean McGroty <[email protected]>
Co-authored-by: Jan Krajdl <[email protected]>
Co-authored-by: Darren Peter <[email protected]>
Co-authored-by: ubik2 <[email protected]>
Co-authored-by: Vi B-P <[email protected]>
Co-authored-by: Ashammaru <[email protected]>
DuncanLHS pushed a commit to DuncanLHS/Marlin-Sunlu-S8 that referenced this pull request Dec 29, 2020
@sjasonsmith @DuncanLHS
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
324b952
TheMichalcinOfficial added a commit to TheMichalcinOfficial/Marlin that referenced this pull request Dec 30, 2020
@TheMichalcinOfficial @thinkyhead
@Vittaly @rhapsodyv @0r31 @Ajtak @Misterke @simonepri @guruathwal @sjasonsmith @qwewer0 @rdhoggattjr @ellensp @pseudex @swissnorp @mks-viva @wmariz @daleckystepan @BsCmOD @Sergey1560 @niccoreyes @kad @mathiasvr @shitcreek @thebelin @tpruvot @mrv96 @InsanityAutomation @LinFor @thisiskeithb @descipher @marciot @Sebazzz @elasticdotventures @FanDjango @leodoener @p3p @kisslorand @GadgetAngel @GMagician @AntoszHUN @rafaljot @nb-rapidia @grauerfuchs @Foxies-CSTL @Serhiy-K @streef @X-Ryl669 @smcgroty @spamik @bizzehdee @ubik2 @violetbp @Ashammaru
Update bug fixes (#4)
0ab0c4b 
* MKS WiFi preliminary changes

* More MKS WiFi

* MKS WiFi strings

* Fix Z label

* Windows LPC Upload for non-admins (MarlinFirmware#20208)

Co-authored-by: Victor Mateus Oliveira <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* Fix DAC setDrvPct (MarlinFirmware#20205)

* [cron] Bump distribution date (2020-11-20)

* Longer LK Pro / Alfawise PRO board (MarlinFirmware#20185)

* Missing header to use suicide() on LVGL UI (MarlinFirmware#20214)

* SINGLE_TOUCH_NAVIGATION Follow Up (MarlinFirmware#20213)

* Printrboard labels

* [cron] Bump distribution date (2020-11-21)

* Fix backward Filament (Presence) Sensor pulls (MarlinFirmware#20228)

Co-authored-by: Kurt Haenen <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* Fix bad SET_FAST_PWM_FREQ calls (MarlinFirmware#20227)

* Superscript substitution (MarlinFirmware#20219)

Co-authored-by: Scott Lahteine <[email protected]>

* Power-Loss cleanup

* BTN_ENC_EN for many boards (MarlinFirmware#19890)

Enables CHECK_ENCODER_ACTIVE_SIGNAL for many more boards.

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* Skip unnecessary (costly) SW Stepper Enable (MarlinFirmware#20218)

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* Fix Load Filament wait (MarlinFirmware#20243)

* Proper pullup/pulldown configurability (MarlinFirmware#20242)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-11-22)

* Clear menu history for browse media on insert (MarlinFirmware#20236)

Co-authored-by: Scott Lahteine <[email protected]>

* Put "$3" on all tests

* Move core conditionals earlier

* Hide docker droppings

* [cron] Bump distribution date (2020-11-23)

* Fix UBL manual mesh adjust behavior (MarlinFirmware#20248)

* Allow Status Message without LCD (MarlinFirmware#20246)

* Fix dummy thermistors for Bed, Chamber, Probe (MarlinFirmware#20247)

* Fix Z4 in ENABLE/DISABLE_AXIS_Z (MarlinFirmware#20256)

This was accidentally broken in PR MarlinFirmware#20218

* [cron] Bump distribution date (2020-11-24)

* LCD position in current units (MarlinFirmware#20145)

* Set "lcd_move_e" index to fix the label (MarlinFirmware#20263)

* Allow cold Filament Load/Unload with M302 P1 (MarlinFirmware#20262)

Co-authored-by: Scott Lahteine <[email protected]>

* No Z_MULTI_ENDSTOPS when HOMING_Z_WITH_PROBE (MarlinFirmware#20254)

* Consistent Probe XY offset type

* Cosmetic G29 ABL tweak

* [cron] Bump distribution date (2020-11-25)

* Update TOUCH_UI_LULZBOT_BIO wrappers

* add missing header to use HAS_SD_HOST_DRIVE (MarlinFirmware#20270)

* Fix COLOR_UI without TOUCH_SCREEN_CALIBRATION (MarlinFirmware#20269)

* [cron] Bump distribution date (2020-11-26)

* Probe Offset Wizard improvements (MarlinFirmware#20239)

* Reduce warnings, extern "C" cleanup (MarlinFirmware#20279)

* Retire HAL for STM32F4 / F7 (MarlinFirmware#20153)

* Tweak some pin errors

* MKS Robin E3 / E3D v1.1 (MarlinFirmware#20216)

* Finish HAL/STM32 cpp wrappers

* No auto debug for EEPROM_CHITCHAT

* Optimize emergency parser check

* Level Corners with Probe option (MarlinFirmware#20241)

* [WIP] Fix Probe::offset_xy (MarlinFirmware#20290)

Co-authored-by: Jason Smith <[email protected]>

* [cron] Bump distribution date (2020-11-27)

* M808 Repeat Markers (MarlinFirmware#20084)

* FIX TMC menu message (MarlinFirmware#20294)

* Fix BTT GTR 1.0 endstop/DIAG pins (MarlinFirmware#20296)

* Fix G2/G3 arcs > 180° (MarlinFirmware#20292)

* Group related homing options (MarlinFirmware#20283)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix M73 LCD code typo (MarlinFirmware#20300)

* [cron] Bump distribution date (2020-11-28)

* [cron] Bump distribution date (2020-11-29)

* Arc Direction followup for circles (MarlinFirmware#20314)

* SKR E3 Turbo Controller Fan (MarlinFirmware#20320)

* Fix STM32F1 'freeMemory()' warnings (MarlinFirmware#20319)

* Leveling Fade Height default setting (MarlinFirmware#20316)

* [cron] Bump distribution date (2020-11-30)

* Adjust axis homed / trusted methods (MarlinFirmware#20323)

* General cleanup

* Increase E3V2 DWIN steps/mm range to 999.9 (MarlinFirmware#20324)

* [cron] Bump distribution date (2020-12-01)

* Prevent Watchdog reset writing Creality 4.x EEPROM (MarlinFirmware#20328)

* Fix E3V2 Control Menu when returning from Info (MarlinFirmware#20338)

* Tweak to EEPROM safe delay

* [cron] Bump distribution date (2020-12-02)

* Level Bed Corners is a sub-menu

* Update to STM32 v10, optimize build (MarlinFirmware#20325)

* Help hosts when password-locked (MarlinFirmware#20348)

* Fix E3V2 DWIN Jerk Menu (MarlinFirmware#20352)

* Fix E3V2 DWIN build without CLASSIC_JERK
* Fix jerk edits applying to wrong index

* Permit SD EEPROM emulation on E3V2 (MarlinFirmware#20353)

* [cron] Bump distribution date (2020-12-03)

* Fix circle arc condition (MarlinFirmware#20322)

* Fix up start, monitor baud (MarlinFirmware#20326)

* Consolidate common pin includes

* Require minimum PlatformIO version (MarlinFirmware#20361)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* [cron] Bump distribution date (2020-12-04)

* Fix MESH_BED_LEVELING w/o SEGMENT_LEVELED_MOVES (MarlinFirmware#20363)

* Loosen E on pause for fila-manipulation (MarlinFirmware#20346)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-12-05)

* Don’t use near keyword as variable name (MarlinFirmware#20374)

* Improved Longer3D LKx Pro board (MarlinFirmware#20372)

Co-authored-by: mrv96 <[email protected]>

* Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)

* Suspend Servos for STM32+NeoPixel (MarlinFirmware#19963)

* Add Creality 4.5.2 board (MarlinFirmware#20378)

Co-authored-by: Jason Smith <[email protected]>

* [cron] Bump distribution date (2020-12-06)

* Fix FYSETC S6 I2C EEPROM size (MarlinFirmware#20340)

Both V1.2 and V2.0 boards have a 24LC16, which is a 2kB EEPROM.

Co-authored-by: PingWin <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* Creality 4.5.2 format and fix

* Use 'nearby' for 'near'

* ExtUI homing / leveling additions

* Move G29 3-point startup earlier

* Fix STM32F1 SERIAL_GET_TX_BUFFER_FREE

* G28 tweaks

* G28 followup

* Avoid invalid memory optimizations (MarlinFirmware#20389)

When building for AVR, merge-all-constants can incorrectly combine constants stored in flash with constants stored in RAM. These have different access requirements, leading to undefined behavior during execution.
Co-authored-by: ellensp <[email protected]>

* [cron] Bump distribution date (2020-12-07)

* Fix fileExists, use openFailed

* Watch idle() depth over 5

* More LPC P-string macros

* Fix auto#.g file handling, add NO_SD_AUTOSTART (MarlinFirmware#20071)

* Shorten Filament Load/Unload Strings to Fit on Graphical Displays (MarlinFirmware#20369)

Co-authored-by: ellensp <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>

* Allow BTT EXP-MOT be used with Displays that needs only EXP 1 (MarlinFirmware#20396)

Co-authored-by: ellensp <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>

* [cron] Bump distribution date (2020-12-08)

* SPI TFT for STM32F4 boards (MarlinFirmware#20384)

* fix pinsDebug for F1 boards

* add MKS Robin PRO V2 board - development board

* tft spi working with F4 boards

* pins formating

* sanity check for TFT on supported cores in STM32

* Fix tabs/spaces in pins file

Co-authored-by: Jason Smith <[email protected]>

* [cron] Bump distribution date (2020-12-09)

* Style, spacing, typo cleanup for recent changes

* Clarify Delta & SCARA config location (MarlinFirmware#20403)

* Allow positive Z nozzle to probe offset (MarlinFirmware#20344)

* Allow a positive value for z offset from nozzle to probe without sanity checks
* Simplify menu_probe_offset.cpp (HOMING_Z_WITH_PROBE)
* Add some more explanation to Configuration Files
* Raise after probe_at_point as if homed

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* Fix Spindle/Laser Control menu (MarlinFirmware#20347)

* Fixes and additions to FTDI EVE Touch UI (MarlinFirmware#20393)

- Fixed name conflict with "SUBSCRIPT_TWO"
- Fixed rendering bugs in "Leveling Menu"
- Only show "Bed Mesh Screen" when UBL is enabled
- Removed CocoaPress code from generic "Main Menu"
- Removed CocoaPress code from LulzBot Bio "Status" screen
- Moved generic "Move Axis" functionality into a base class
- Added CocoaPress custom screens:
   - Status Screen
   - Unload Cartridge
   - Load Chocolate
   - Main Menu
   - Advanced Settings
   - XYZ Move (based on "Move Axis" base class)
   - Extrusion Move (based on "Move Axis" base class)
- CocoaPress tweaks to "Temperature" screen
- Fix FTDI EVE Touch UI compilation errors when not using leveling.

* Move ExtUI ABL mesh edit, limit to bilinear (MarlinFirmware#20381)

* Move ExtUI call

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>
Co-authored-by: Sebastiaan Dammann <[email protected]>

* MKS Robin Pins fixes for STM32 and STM32F1 (MarlinFirmware#20404)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-12-10)

* Clarify "not Interrupt-capable" error message (MarlinFirmware#20419)

* Fix UBL Debug Messages (MarlinFirmware#20423)

Co-authored-by: ellensp <[email protected]>

* [cron] Bump distribution date (2020-12-11)

* Z_SENSORLESS sanity checks (MarlinFirmware#20421)

Co-authored-by: Jason Smith <[email protected]>

* Probe offset wizard fixes (MarlinFirmware#20414)

* STOW probe, reverting incorrect earlier change from MarlinFirmware#20344
* Adjust soft endstop disables, to ensure travel below bed functions properly

Co-authored-by: FanDjango <[email protected]>

* SENSORLESS_PROBING sanity check followup (MarlinFirmware#20438)

* [cron] Bump distribution date (2020-12-12)

* Better animated boot screen

* Fix SDCARD_SORT_ALPHA on Ender 3 V2 (MarlinFirmware#20443)

* Add HAS_PIN_27_BOARD for CREALITY_V4 (MarlinFirmware#20446)

Co-authored-by: ellensp <[email protected]>

* Improve ASSISTED_TRAMMING_WIZARD probe stowing (MarlinFirmware#20437)

* When BLTOUCH_HS_MODE enabled, stow pin before user interaction
* For all probes, ensure probe stows at end of wizard

* [cron] Bump distribution date (2020-12-13)

* Probe Offset Wizard followupBack to PROBE_PT_RAISE/separate STOW, make "PROBING" msg appear (MarlinFirmware#20439)

* Go back to always use PROBE_PT_RAISE with a discrete stow. This ensures a raise above the bed, while stowing prior to exiting the wizard.
* Fix issue preventing text while moving to X/Y position
Co-authored-by: FanDjango <[email protected]>

* Adjust planner debugging

* SHORT_MANUAL_Z_MOVE => FINE_MANUAL_MOVE

* [cron] Bump distribution date (2020-12-14)

* LPC176x framework update (MarlinFirmware#20469)

* [cron] Bump distribution date (2020-12-15)

* Fix formatting

* Preheat before leveling

* Always enable leveling after G28

* Trust that script -x flags will always be set (MarlinFirmware#20453)

* Fix M1001 auto-check logic (MarlinFirmware#20456)

* Auto-check followup

* Please install the EditorConfig plugin

* Fix RESTORE_LEVELING_AFTER_G28 (MarlinFirmware#20471)

* Creality v4.5.3 (CR-6 SE, CR-6 MAX) (MarlinFirmware#20468)

* Update some pins errors

* Update some LCD includes

* Trust STM32 gcc versions

* [cron] Bump distribution date (2020-12-16)

* Update Italian language (MarlinFirmware#20480)

* Update Hungarian language

Co-Authored-By: Zs.Antal <[email protected]>

* Update French language (MarlinFirmware#20472)

* [cron] Bump distribution date (2020-12-17)

* Use homing_feedrate function

* Homing feedrates as XYZ array (MarlinFirmware#20426)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix ZoneStar LCD 2004 buttons (MarlinFirmware#20489)

* Make M220 B / R a standard feature (MarlinFirmware#20355)

* Balance CI tests (MarlinFirmware#20485)

* Fix and optimize MightyBoard (MarlinFirmware#20493)

* [cron] Bump distribution date (2020-12-18)

* MKS Robin Nano V3 and STM32F4x0Vx Variant (MarlinFirmware#20430)

* DOGM: Slow down touchscreen calibration (MarlinFirmware#20454)

* [cron] Bump distribution date (2020-12-19)

* Rename QUIET_PROBING

* Tweaks for pins_BTT_SKR_common.h

* [cron] Bump distribution date (2020-12-20)

* Let boards set Default TMC Slave Addresses (MarlinFirmware#20498)

Co-authored-by: Scott Lahteine <[email protected]>

* Minimum temp options for Probing and G12 Nozzle Clean (MarlinFirmware#20383)

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* Probe Tare, Probe Activation Switch (MarlinFirmware#20379)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>
Co-authored-by: Jason Smith <[email protected]>

* Fix Creality EEPROM watchdog freq. (MarlinFirmware#20510)

* Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 (MarlinFirmware#20354)

* Languages cleanup

* Update Russian and Ukrainian languages (MarlinFirmware#20508)

* Fix PIO typo

* [cron] Bump distribution date (2020-12-21)

* Get E3V2 DWIN `MACHINE_SIZE` from config (MarlinFirmware#20526)

* Apply HOME_AFTER_DEACTIVATE for 'G28 O' (MarlinFirmware#20525)

* Clean up some pins

* Add BTT SKR CR6 board (MarlinFirmware#20522)

* Fix G34 compile with bed leveling disabled (MarlinFirmware#20537)

* Fix some Russian (MarlinFirmware#20529)

* Robin pins followup

* Tweak FTDI spacing

* Add Tune -> Advanced Settings to FTDI EVE (MarlinFirmware#20532)

* [cron] Bump distribution date (2020-12-22)

* 12-bit ADC resolution for STM32 (MarlinFirmware#20519)

* FTDI EVE custom user menus (MarlinFirmware#20518)

* Improve STM32 timer conflict messages (MarlinFirmware#20544)

* Fix UBL mesh inset Z position (MarlinFirmware#20538)

* Overrides to prevent STM32 timer conflicts (MarlinFirmware#20545)

* Improve Touch Calibration screen (MarlinFirmware#20524)

* Creality v4.3.1 (Ender 6) board (MarlinFirmware#20512)

* Anet ET4 / ET4P and Anet TFT28 / TFT35 (MarlinFirmware#20280)

* STM32F1xx support for TFTGLCD (MarlinFirmware#20515)

* Unify FYSETC F6 1.3 / 1.4 (MarlinFirmware#20507)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix G28 leveling state, UBL compile (MarlinFirmware#20499)

* Support RGBW on PCA9632 (MarlinFirmware#20455)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-12-23)

* Refactor 'Level Corners with Probe' (MarlinFirmware#20460)

Co-authored-by: Scott Lahteine <[email protected]>

* Improve plan_arc circle detection (MarlinFirmware#20440)

Co-authored-by: Scott Lahteine <[email protected]>

* FTDI EVE: Cyrillic font, some minor fixes (MarlinFirmware#20517)

* Enhanced Italian language (MarlinFirmware#20551)

* Probe Activation Switch followup (MarlinFirmware#20550)

* Support ANET_FULL_GRAPHICS_LCD_ALT_WIRING on BTT SKR 1.4 (MarlinFirmware#20427)

* Apply ENABLED in ExiUI / FTDI

* Remaining Time for FTDI EVE, bp for ExtUI (MarlinFirmware#20549)

Co-authored-by: Scott Lahteine <[email protected]>

* Add OPTIMIZED_MESH_STORAGE option (for UBL) (MarlinFirmware#20371)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-12-24)

* Move BTT_SKR_CR6

* LVGL and Classic UI for STM32 (MarlinFirmware#20552)

* Add "End Repeat Loops" menu item

* Fix DOGM status message scrolling (MarlinFirmware#20557)

* Fix ST7920 timing for Rumba32, Fysetc S6 (MarlinFirmware#20556)

* Fix, clean up FTDI EVE Touch UI (MarlinFirmware#20466)

Co-Authored-By: Marcio T. <[email protected]>

* Apply NO_MOTION_BEFORE_HOMING to joystick motion (MarlinFirmware#20462)

Co-authored-by: Scott Lahteine <[email protected]>

* Cutter Power in percent format (MarlinFirmware#20410)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Luu Lac <[email protected]>

* [cron] Bump distribution date (2020-12-25)

* [cron] Bump distribution date (2020-12-26)

* [cron] Bump distribution date (2020-12-27)

* Fix SPINDLE_LASER_FREQUENCY (MarlinFirmware#20509)

* Fix some comments

* Remove CREALITY_TOUCH

* Add probe_switch_activated

* Init tare pin once

* [cron] Bump distribution date (2020-12-28)

* Validate defined probe points (MarlinFirmware#20572)

* General cleanup

* Allow define HOMING_FEEDRATE_(XY|Z)

* Remove URL scheme

* Small / Large Boot Screen option for TFT_COLOR_UI (MarlinFirmware#20578)

* Better defaults, compatibility for SDIO + STM32 (MarlinFirmware#20570)

* Fix Menu Mixer for Color UI (MarlinFirmware#20566)

* Use ADC_RESOLUTION 12 for all STM32 (MarlinFirmware#20562)

* Fix LVGL_UI G-code preview (MarlinFirmware#20564)

* Fix Change Filament menu actions (MarlinFirmware#20565)

Co-authored-by: Scott Lahteine <[email protected]>

* Menu item index followup

* [cron] Bump distribution date (2020-12-29)

* Apply SHOW_BOOTSCREEN to TFT_COLOR_UI (MarlinFirmware#20586)

* LVGL G-code preview. Legacy MKS WiFi Cura plugin compatibility (MarlinFirmware#20589)

* Clarify sanity-check for custom status bitmap (MarlinFirmware#20588)

* Pins, comment cleanup

* USB FD via native USB Host + MSC (MarlinFirmware#20571)

* Support 4.3" (480x272) Color UI display (MarlinFirmware#20334)

* [cron] Bump distribution date (2020-12-30)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Vitaliy <[email protected]>
Co-authored-by: Victor Mateus Oliveira <[email protected]>
Co-authored-by: Orel <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Ajtak <[email protected]>
Co-authored-by: Kurt Haenen <[email protected]>
Co-authored-by: Kurt Haenen <[email protected]>
Co-authored-by: Simone Primarosa <[email protected]>
Co-authored-by: Gurmeet Athwal <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: qwewer0 <[email protected]>
Co-authored-by: rdhoggattjr <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: pseudex <[email protected]>
Co-authored-by: swissnorp <[email protected]>
Co-authored-by: mks-viva <[email protected]>
Co-authored-by: wmariz <[email protected]>
Co-authored-by: Štěpán Dalecký <[email protected]>
Co-authored-by: BsCmOD <[email protected]>
Co-authored-by: yysh12 <[email protected]>
Co-authored-by: Sergey1560 <[email protected]>
Co-authored-by: Thomas Niccolo Reyes <[email protected]>
Co-authored-by: Alexander D. Kanevskiy <[email protected]>
Co-authored-by: Mathias Rasmussen <[email protected]>
Co-authored-by: Luu Lac <[email protected]>
Co-authored-by: Belin Fieldson <[email protected]>
Co-authored-by: Tanguy Pruvot <[email protected]>
Co-authored-by: mrv96 <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: LinFor <[email protected]>
Co-authored-by: PingWin <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Mike La Spina <[email protected]>
Co-authored-by: Marcio T <[email protected]>
Co-authored-by: Sebastiaan Dammann <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: elasticdotventures <[email protected]>
Co-authored-by: FanDjango <[email protected]>
Co-authored-by: FanDjango <[email protected]>
Co-authored-by: leodoener <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: kisslorand <[email protected]>
Co-authored-by: JoAnn Manges <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Zs.Antal <[email protected]>
Co-authored-by: rafaljot <[email protected]>
Co-authored-by: nb-rapidia <[email protected]>
Co-authored-by: grauerfuchs <[email protected]>
Co-authored-by: Foxies <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: Dick Streefland <[email protected]>
Co-authored-by: cr20-123 <[email protected]>
Co-authored-by: X-Ryl669 <[email protected]>
Co-authored-by: Sean McGroty <[email protected]>
Co-authored-by: Jan Krajdl <[email protected]>
Co-authored-by: Darren Peter <[email protected]>
Co-authored-by: ubik2 <[email protected]>
Co-authored-by: Vi B-P <[email protected]>
Co-authored-by: Ashammaru <[email protected]>
TheMichalcinOfficial added a commit to TheMichalcinOfficial/Marlin that referenced this pull request Dec 30, 2020
@TheMichalcinOfficial @thinkyhead
@Serhiy-K @sjasonsmith @phcay @simonepri @ellensp @shitcreek
Update branch (#6)
709deca 
* Don't define IS_ULTIPANEL empty

* Fix HAL/STM32 FastIO for analog pins (MarlinFirmware#19735)

* Fix SAMD Serial name macro (MarlinFirmware#19765)

* Marlin 2.0.7.2

* Update "Bug Report" template (MarlinFirmware#19906)

* Fix bilinear_line_to_destination definition

See MarlinFirmware#19431

* Fix extraneous Linear Advance DIR change (MarlinFirmware#20131)

* Fix bad SET_FAST_PWM_FREQ calls (MarlinFirmware#20227)

* Set "lcd_move_e" index to fix the label (MarlinFirmware#20263)

* Help hosts when password-locked (MarlinFirmware#20348)

* Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)

* Fix TEMP_0_TR_ENABLE

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: phcay <[email protected]>
Co-authored-by: Simone Primarosa <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Luu Lac <[email protected]>
TheMichalcinOfficial added a commit to TheMichalcinOfficial/Marlin that referenced this pull request Dec 30, 2020
@TheMichalcinOfficial @thinkyhead
@Serhiy-K @sjasonsmith @phcay @simonepri @ellensp @shitcreek
Update branch (#7)
75cdf13 
* Don't define IS_ULTIPANEL empty

* Fix HAL/STM32 FastIO for analog pins (MarlinFirmware#19735)

* Fix SAMD Serial name macro (MarlinFirmware#19765)

* Marlin 2.0.7.2

* Update "Bug Report" template (MarlinFirmware#19906)

* Fix bilinear_line_to_destination definition

See MarlinFirmware#19431

* Fix extraneous Linear Advance DIR change (MarlinFirmware#20131)

* Fix bad SET_FAST_PWM_FREQ calls (MarlinFirmware#20227)

* Set "lcd_move_e" index to fix the label (MarlinFirmware#20263)

* Help hosts when password-locked (MarlinFirmware#20348)

* Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)

* Fix TEMP_0_TR_ENABLE

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: phcay <[email protected]>
Co-authored-by: Simone Primarosa <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Luu Lac <[email protected]>
tharts pushed a commit to tharts/Marlin that referenced this pull request Jan 6, 2021
@sjasonsmith @tharts
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
0b0bb30
Ramis84 pushed a commit to Ramis84/Makerfarm-Pegasus-8-Marlin that referenced this pull request Jan 27, 2021
@sjasonsmith @Ramis84
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
6ef485d
avandekamp pushed a commit to avandekamp/Marlin that referenced this pull request Feb 4, 2021
@sjasonsmith @avandekamp
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
8b35d30
dpreed pushed a commit to dpreed/Marlin_2.0.x that referenced this pull request Feb 5, 2021
@sjasonsmith @dpreed
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
050ef7a
joskfg added a commit to sergiq/Marlin that referenced this pull request Apr 26, 2021
@joskfg @thinkyhead
@thisiskeithb @Haxk20 @TheNeskik @GMagician @sjasonsmith @ManuelMcLure @ellensp @marciot @mmajoor @Bacon-Fixation @rhapsodyv @tovam @enigmaquip @cosmoderp @deram @jahartley @InsanityAutomation @colemarkham @qwewer0 @makerbase-mks @p3p @riodoro1 @looxonline @isanval @siana @tpruvot @le3tspeak @Serhiy-K @positron96 @SwiftNick @rmoravcik @xorza @stef-ladefense @swissnorp @bilsef @V1EngineeringInc @Speaka @SilverCory @mwinters-stuff @signetica @ladismrkolj @SamantazFox @FLYmaker @andreibobirica @SHBnik @earlephilhower @devel0 @phcay @simonepri @shitcreek @ldursw
Upgrade (#4)
a3dab6a 
* Clean up W25QXXFlash class

* Fix Creality RET6 env - RE (MarlinFirmware#19340)

* [cron] Bump distribution date (2020-09-12)

* Fix Print Stats appearance (MarlinFirmware#19348)

* M872 wait for probe temperature (MarlinFirmware#19344)

* [cron] Bump distribution date (2020-09-13)

* Highlight Creality DWIN menu icons (MarlinFirmware#19368)

* Update Italian language (MarlinFirmware#19365)

* Fix EXP2 pin define for MKS SGEN_L (MarlinFirmware#19369)

* Read from backup TMC StealthChop state (MarlinFirmware#19364)

* Fix extra string substitution bug (MarlinFirmware#19351)

* Touch UI "Leveling" menu, misc. fixes (MarlinFirmware#19349)

* Allow SWD debug on Robin Nano (MarlinFirmware#19345)

* heater_ind_t => heater_id_t

* [cron] Bump distribution date (2020-09-14)

* Improve temperature runaway, idle timeout (MarlinFirmware#19339)

Co-authored-by: Scott Lahteine <[email protected]>

* Better choice of code

Followup to MarlinFirmware#19344

* Always show Compiled:

* M115 strings

* Allow E3 V2 DWIN without EEPROM, POWER_LOSS_RECOVERY

* Add missing FTDI EVE menu source (MarlinFirmware#19382)

* More strict STATIC_ITEM_N (MarlinFirmware#19378)

* Only set up SPI pins as needed (MarlinFirmware#19372)

* [cron] Bump distribution date (2020-09-15)

* [cron] Bump distribution date (2020-09-16)

* E3 V2 DWIN cleanup

* More DWIN cleanup

* MarlinUI percent methods for all

* [cron] Bump distribution date (2020-09-17)

* Demo and test multiple PID defaults (MarlinFirmware#19413)

* Fix missing spaces in info menu (MarlinFirmware#19404)

* Add more DWIN commands, docs (MarlinFirmware#19395)

* E3 V2 DWIN: Z-Offset, cleanup, versatility (MarlinFirmware#19384)

Co-authored-by: Scott Lahteine <[email protected]>

* SHOW_REMAINING_TIME for HD44780 character LCD (MarlinFirmware#19416)

* Add warning to ExtUI Bed Mesh Screen. (MarlinFirmware#19397)

- Show a warning on the Mesh Bed Leveling screen if some points aren't probed.

* Fix MKS UI SPI flash typo (MarlinFirmware#19410)

* Expose JOYSTICK_DEBUG to the general user (MarlinFirmware#19394)

Co-authored-by: Scott Lahteine <[email protected]>

* Update stale issue message and parameters (MarlinFirmware#19412)

* Update stale issue bot

* Update close-stale.yml

* Update close-stale.yml

Co-authored-by: Scott Lahteine <[email protected]>

* Host Action: Start (MarlinFirmware#19398)

* Move screen for Color UI (MarlinFirmware#19386)

* [cron] Bump distribution date (2020-09-18)

* Fix missing include (MarlinFirmware#19418)

Co-authored-by: ellensp <[email protected]>

* [cron] Bump distribution date (2020-09-19)

* Fix CoreXY compile with backlash cal. (MarlinFirmware#19422)

* Change some dwin defines

* Fix compile for Taz Pro (MarlinFirmware#19424)

* Fix case light brightness save/load (MarlinFirmware#19436)

* Optional Host Start menu item (MarlinFirmware#19443)

* Ultratronics Pro SPI pins (MarlinFirmware#19444)

* Fix Creality DWIN Control menu icons (MarlinFirmware#19441)

* [cron] Bump distribution date (2020-09-20)

* Whitespace cleanup

* Add multi-extruder condition

* Cleanup before MKS changes

* Add HAS_ROTARY_ENCODER

* [cron] Bump distribution date (2020-09-21)

* Add MKS Robin E3P, improve LVGL UI (MarlinFirmware#19442)

* Optional menu item for Assisted Tramming (MarlinFirmware#19447)

* Replace Serial with Serial1 in pins files (MarlinFirmware#19459)

* Update pins_ANET_10.h

* [cron] Bump distribution date (2020-09-22)

* Fix up K8800 pins (MarlinFirmware#19476)

* Define <u8,u8,u8>::softSPI (MarlinFirmware#19419)

* MKS SGEN L V2 adaptable heaters/fans (MarlinFirmware#19462)

* Update board/teensy comment (MarlinFirmware#19456)

* Fix Teensy 4.1 include

* [cron] Bump distribution date (2020-09-23)

* Fix up tests, warnings

* Catch a TMC address conflict early (MarlinFirmware#19458)

* New Touch UI buttons (MarlinFirmware#19465)

* Include pins.h in dependencies script (MarlinFirmware#19468)

* MKS Robin Mini uses ONBOARD_SPI_DEVICE (MarlinFirmware#19460)

* Teensy pins cleanup

* Preserve brightness in EEPROM validate (MarlinFirmware#19485)

Co-authored-by: Scott Lahteine <[email protected]>

* Define UART pins for LPC debug based on LPC_PINCFG_UART (MarlinFirmware#19475)

* Whitespace cleanup

* [cron] Bump distribution date (2020-09-24)

* HAL and serial cleanup

Co-Authored-By: Jason Smith <[email protected]>

* HAL/serial followup

* Fix some pin inits

* [cron] Bump distribution date (2020-09-25)

* Fix and improve STM32F1 serial (MarlinFirmware#19464)

* BigTreeTech SKR E3 Turbo (MarlinFirmware#19500)

* Sanity check old serial names

* TFT: No timeout on Move Screen (MarlinFirmware#19426)

* [cron] Bump distribution date (2020-09-26)

* Escape the M33 string arg (MarlinFirmware#19515)

* Fix MKS Robin undefined pins error (MarlinFirmware#19507)

* Fix SKR 1.4 thermistor pin comments (MarlinFirmware#19510)

* SKR E3 Turbo followup (MarlinFirmware#19513)

* Fix MBL "Click to continue" on Color UI touchscreen (MarlinFirmware#19514)

* Allow ColorUI color customization (MarlinFirmware#19484)

* MMU2 S Mode spins the BMG gears during C0 (MarlinFirmware#19429)

* [cron] Bump distribution date (2020-09-27)

* Tweak MMU beeps, misc. cleanup

* Drop extra Bed PID

* Allow M524 between M23 and M24

* E3 DWIN: General cleanup

* E3 DWIN: "No Media" message

* CardReader cleanup

* [cron] Bump distribution date (2020-09-28)

* LVGL followup fixing "C", etc. (MarlinFirmware#19517)

* Fix Allen Key Probe pin test (MarlinFirmware#19520)

* Working LCD_USE_DMA_FSMC (MarlinFirmware#19522)

* Thermistor: Kis3d Silicone heater + precision cast plate (MarlinFirmware#19528)

* Update AnyCubic deps

* Menu tweak

* Prettier INI

* Rename LCD conditionals (MarlinFirmware#19533)

* MarlinUI for SPI/I2C TFT-GLCD character-based display bridge (MarlinFirmware#19375)

* Update configs to 020007

* Tweaks to git helpers

* Default E3 V2 to English

* Change "Fr" on LCD to ">>" (MarlinFirmware#18830)

* Multi-line comments cleanup (MarlinFirmware#19535)

* Fix diveToFile with open Dir object (MarlinFirmware#19539)

* Fix CardReader diveToFile
* Add CardReader::fileExists

* Improve Power-Loss Recovery (MarlinFirmware#19540)

* Add extra CardReader debugging

* Fetch longname when a file exists

* Fix up E3 DWIN Power Panic

* Anycubic Chiron full feature support (MarlinFirmware#19505)

* [cron] Bump distribution date (2020-09-29)

* Marlin 2.0.7

* Keep HAL tasks running during PID Autotune (MarlinFirmware#19671)

* [cron] Bump distribution date (2020-09-30)

* [cron] Bump distribution date (2020-10-01)

* Fix Move Screen with disabled Touch (MarlinFirmware#19558)

* Fix Buzzer (pin) init for uninitialized FastIO (MarlinFirmware#19559)

* Update Slovak language (MarlinFirmware#19561)

* No move on Park = No move on Resume (MarlinFirmware#19569)

* Fix Anycubic i3 Mega target temperature display (MarlinFirmware#19572)

Also includes a workaround for missing (probably un-fetched) long name in file listing

* G35 workaround for Pronterface "feature" (MarlinFirmware#19577)

* [cron] Bump distribution date (2020-10-02)

* Minor SPI fixes, systick_callback for STM32F1 HAL compatibility (MarlinFirmware#19565)

* Replace tabs with spaces

* Adjust HAL platform defines, comments

* Fix onboard SD card support for Teensy 3.6 & 4.1 (MarlinFirmware#19593)

* Fix compile of MMU2 with S-mode disabled (MarlinFirmware#19584)

* Fix TEMP_ADC_PROBE support for STM32F1 (MarlinFirmware#19582)

Co-authored-by: ellensp <[email protected]>

* Fix wrappers on HAL/STM32F1 .cpp files (MarlinFirmware#19581)

Co-authored-by: Scott Lahteine <[email protected]>

* Touch UI support for X2, Y2 and Z2 (MarlinFirmware#19538)

* Fix 'bossac' upload on Windows (MarlinFirmware#19545)

* [cron] Bump distribution date (2020-10-03)

* [cron] Bump distribution date (2020-10-04)

* Fix Tune/Fan edit items

- Fixes MarlinFirmware#19617
- Followup to MarlinFirmware#18400

* Shared singlenozzle item

* Fix German translation purging/unloading (MarlinFirmware#19615)

* Move SF_ARC_FIX option

* Fix Z_AFTER_HOMING without probe (MarlinFirmware#19607)

* Add HAS_FAST_MOVES

* Fix Archim1 stepper timing (with new variant) (MarlinFirmware#19596)

* [cron] Bump distribution date (2020-10-05)

* Allow bypass for cold E movement (MarlinFirmware#19606)

* Z Probe Offset Wizard (MarlinFirmware#18866)

* Sync config to examples

* Trailing whitespace

* [cron] Bump distribution date (2020-10-06)

* Improve retract / unretract labels

* Fix Ender-3 V2 DWIN Stop SD Print (MarlinFirmware#19642)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Chamber servo vent, auto fan (MarlinFirmware#19519)

* Update language fonts

* [cron] Bump distribution date (2020-10-07)

* Fix small font section directive, mixer warning

* Chamber vent/fan followup

* Restore ° to 6x9 small info font (MarlinFirmware#19645)

* More accessible PROBE_OFFSET_WIZARD (MarlinFirmware#19647)

* [cron] Bump distribution date (2020-10-08)

* Update PROBE_OFFSET_WIZARD comment (MarlinFirmware#19652)

* Apply env:mega2560ext to relevant boards (MarlinFirmware#19624)

* Use 0xFF (not 'ff') for byte transfer

* Permit touch calibration override

* Fix and improve Makefile / CMake (MarlinFirmware#19640)

* [cron] Bump distribution date (2020-10-09)

* Update Italian language (MarlinFirmware#19654)

* Fix touch ifndefs (MarlinFirmware#19661)

* Support for FLY MINI (MarlinFirmware#19185)

* Support for Debug Codes - Dnnn (MarlinFirmware#19225)

Co-authored-by: Scott Lahteine <[email protected]>

* Optional `M42`/`M226`; Add more features filters (MarlinFirmware#19664)

* Batch appercase hex values

* [cron] Bump distribution date (2020-10-10)

* HAS_CHARACTER_LCD => HAS_MARLINUI_HD44780 (MarlinFirmware#19673)

* Fixes for TFTGLCD Panel, FastIO (MarlinFirmware#19614)

* Marlin 2.0.7.1

* TFT Refactoring (MarlinFirmware#19192)

* split tft folder in two: tft for color ui; tft_io for shared tft code

* after the files got moved, now the code was moved to the right place

* classic ui using TFT IO init lcd codes

* feature to compile tft_io when enabled

* compiling fix

* lvgl spi tft working with tft io init codes

* there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything

* remove debug

* base for TFT rotation and mirroring API, and ILI9488 support

* ST7796S rotate and mirror support

* ST7789V rotate and mirror support

* ST7735 rotate and mirror support

* ILI9341 rotate and mirror support

* ILI9328 rotate and mirror support

* R61505 rotate and mirror support

* MKS TFT definitions

* more configs for mks tfts

* update config

* naming typo

* to configure the user interface

* ANYCUBIC_TFT35

* tft configs

* support for SSD1963

* tft display types

* updated conditionals lcd; first board fully working with the new code - all 3 ui!

* compatiblity

* changed name

* move classic ui file name

* rename TURN -> ROTATE

* GRAPHICAL_TFT_ROTATE_180 deprecated

* first fsmc board fully working - chitu v5

* mks robin nano v1.2 + tft 35 ok!

* right pin name

* anycubic tft tested in a TRIGORILLA_PRO

* chitu v6

* nano 32 tft orientation

* mks tft43

* mks tft43 rotation

* fixed LONGER LK tft setup

* GRAPHICAL_TFT_UPSCALE defined by the display type

* better offsets defaults

* Update Configuration.h

* Update tft_fsmc.cpp

* Update Conditionals_LCD.h

* Tweak comments

* update nano tests

* Revert "update nano tests"

This reverts commit a071ebb.

* default tft

* outdated comments

* to not break non-vscode builds

* upscale tft 35

* support tft 180 rotation for color ui

* Each TFT Driver is responsible for its default color mode.

* use auto detect in mks displays, because some of them could be shipped with diferent drivers

* extra s

* unused code

* wrong -1

* missing mirror options

* Smaller regex pattern

* Comment updates

* Clean up old defines

* Apply pins formatting

* GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180

* MKS_ROBIN_TFT_V1_1R

* merge fix

* correct resolution

* auto is default, dont need be there, and it will allow the user to configure it even for named displays

* to not use rotation with MKS_ROBIN_TFT_V1_1R

* i like () in macros

* avoid sleepy commits

* default for st7789 is rgb

* nano follow up

* to allow ili9328 rotation

* default is rgb

* boards merge follow up

* to match bootloader orientation

* HAS_TOUCH_XPT2046 is not hal specific anymore

* lets not forget LPC

* 180 rotation for ili9328 and R61505

* Clean up whitespace

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>

* G34 Mechanical Gantry Calibration (like Prusa M915) (MarlinFirmware#18972)

Co-authored-by: Scott Lahteine <[email protected]>

* Sanity-check mutually-exclusive G34 features (MarlinFirmware#19706)

* Fix screen click reading too often (MarlinFirmware#19696)

Co-authored-by: andreibobirica <[email protected]>

* Option to prevent (extra) Watchdog init on STM32 (MarlinFirmware#19693)

* Implement wait_for_user for Color UI (MarlinFirmware#19694)

* Fix UTF8 handling for Color UI (MarlinFirmware#19708)

* Fixes for TFTGLCD Panel, FastIO (MarlinFirmware#19614)

* Restore correct STM32 port-bits code (MarlinFirmware#19678)

* Save PLR on resume from pause (MarlinFirmware#19676)

Co-Authored-By: shahab <[email protected]>

* Digipots refactor / cleanup (MarlinFirmware#19690)

* Fix at90usb1286 build (MarlinFirmware#19687)

* Skip check for USBCON during dependency detection
* Ignore incompatible Teensy_ADC library, which requires Teensy >= 3
* Add IS_AT90USB

Co-authored-by: Scott Lahteine <[email protected]>

* Fix various errors, warnings in example config builds (MarlinFirmware#19686)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix I2C_ADDRESS sign warning (MarlinFirmware#19685)

* Fix motion compile w/out probe-oriented settings (MarlinFirmware#19684)

* Add REPORT_TRAMMING_MM option (MarlinFirmware#19682)

Co-authored-by: Scott Lahteine <[email protected]>

* Allow MAX31865 resistance values configuration (MarlinFirmware#19695)

* Add D100 Watchdog Test (MarlinFirmware#19697)

* Add loose soft endstop state, apply to UBL fine-tune (MarlinFirmware#19681)

Co-authored-by: Scott Lahteine <[email protected]>

* Fixes for TFTGLCD Panel, FastIO (MarlinFirmware#19614)

* Restore correct STM32 port-bits code (MarlinFirmware#19678)

* [cron] Bump distribution date (2020-10-11)

* Fix various errors, warnings in example config builds (MarlinFirmware#19686)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2020-10-12)

* [cron] Bump distribution date (2020-10-13)

* Simple bool in soft_endstops_t

* Fix SET_SOFT_ENDSTOP_LOOSE w/out soft endstops (MarlinFirmware#19734)

* [cron] Bump distribution date (2020-10-14)

* [cron] Bump distribution date (2020-10-15)

* Fix mega2560ext environment (MarlinFirmware#19730)

* Watchdog Refresh for LVGL Asset Load (MarlinFirmware#19724)

* TFT followup fixes (MarlinFirmware#19710)

* If needed, home before G34 (MarlinFirmware#19713)

* Add NUCLEO-F767ZI dev board (MarlinFirmware#19373)

Co-authored-by: Lorenzo Delana <[email protected]>

* Don't define IS_ULTIPANEL empty

* Fix HAL/STM32 FastIO for analog pins (MarlinFirmware#19735)

* Fix SAMD Serial name macro (MarlinFirmware#19765)

* Marlin 2.0.7.2

* Update "Bug Report" template (MarlinFirmware#19906)

* Fix bilinear_line_to_destination definition

See MarlinFirmware#19431

* Fix extraneous Linear Advance DIR change (MarlinFirmware#20131)

* Fix bad SET_FAST_PWM_FREQ calls (MarlinFirmware#20227)

* Set "lcd_move_e" index to fix the label (MarlinFirmware#20263)

* Help hosts when password-locked (MarlinFirmware#20348)

* Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)

* Fix TEMP_0_TR_ENABLE

* Fixes for TFTGLCD (MarlinFirmware#20734)

* Fix PR template, lock action

Co-Authored-By: Jason Smith <[email protected]>

* Ignore M22 during SD print

* Trust XY after Quiet Probing short sleep (MarlinFirmware#21237)

* Clean up labels on close

* Token for "Clean Closed" action (MarlinFirmware#21320)

* Remove one label at a time

* Emojis and donate link

* Add emojis

* Change issue templates to YML

* Enhance workflows

* Auto-label Feature Requests (MarlinFirmware#21348)

* Fix bool++ warning

* Fix Hotend-abort-on-idle Check (MarlinFirmware#21535)

* Sanity Check newer Configs too (MarlinFirmware#21550)

Co-authored-by: Scott Lahteine <[email protected]>

* Keep 'confirmed bug' open

* Fix check-pr action

* 'issue_body' obsolete in templates

* Update Issue Templates (MarlinFirmware#21702)

* Fix SDIO buffer alignment (MarlinFirmware#21396)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Haxk20 <[email protected]>
Co-authored-by: Neskik <[email protected]>
Co-authored-by: Jesse S <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Marcio T <[email protected]>
Co-authored-by: mmajoor <[email protected]>
Co-authored-by: Zachary Annand <[email protected]>
Co-authored-by: Victor Oliveira <[email protected]>
Co-authored-by: tovam <[email protected]>
Co-authored-by: enigmaquip <[email protected]>
Co-authored-by: cosmoderp <[email protected]>
Co-authored-by: deram <[email protected]>
Co-authored-by: jahartley <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Cole Markham <[email protected]>
Co-authored-by: qwewer0 <[email protected]>
Co-authored-by: makerbase <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: riodoro1 <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Luke Harrison <[email protected]>
Co-authored-by: Trocololo <[email protected]>
Co-authored-by: Siana Gearz <[email protected]>
Co-authored-by: Tanguy Pruvot <[email protected]>
Co-authored-by: Emperor <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: Pavel Melnikov <[email protected]>
Co-authored-by: Nick <[email protected]>
Co-authored-by: Roman Moravčík <[email protected]>
Co-authored-by: Ilya <[email protected]>
Co-authored-by: Stéphane <[email protected]>
Co-authored-by: swissnorp <[email protected]>
Co-authored-by: bilsef <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Ryan V1 <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Speaka <[email protected]>
Co-authored-by: Cory Ory <[email protected]>
Co-authored-by: Mathew Winters <[email protected]>
Co-authored-by: signetica <[email protected]>
Co-authored-by: ladismrkolj <[email protected]>
Co-authored-by: Samantaz Fox <[email protected]>
Co-authored-by: 石立枫 <[email protected]>
Co-authored-by: andreibobirica <[email protected]>
Co-authored-by: shahab <[email protected]>
Co-authored-by: Earle F. Philhower, III <[email protected]>
Co-authored-by: Lorenzo Delana <[email protected]>
Co-authored-by: phcay <[email protected]>
Co-authored-by: Simone Primarosa <[email protected]>
Co-authored-by: Luu Lac <[email protected]>
Co-authored-by: ldursw <[email protected]>
thinkyhead pushed a commit that referenced this pull request Apr 30, 2021
@sjasonsmith @thinkyhead
Fix TMC_HOME_PHASE divide by zero (#20368)
1a618b1
pfsmorigo pushed a commit to pfsmorigo/Marlin that referenced this pull request Dec 18, 2023
@sjasonsmith @pfsmorigo
Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368)
71a3b2b
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers

@0purple 0purple 0purple approved these changes

Assignees
No one assigned
Labels
C: Motion PR: Bug Fix
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
3 participants
@sjasonsmith @0purple @thinkyhead