Allow E3V2 steps/mm to be adjusted up to 999.9 #20324
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
I believe there are a few printers with more than 999.9 steps-per-unit on one of the axes. |
There are, but that will require a larger change to fix formatting and field positioning. I don't think it is a hard fix, just one that was distracting me from the leveling work I'm doing. This is a quick fix which should be sufficient for most everybody using this on an E3 V2, which is currently the only way to get one of these displays. |
|
Agreed with @sjasonsmith - the biggest issue that I see is those needing to set ~421 for the.... BMG geared extruder? Right now, its being worked around via gcode - but this is a much better way. |
|
I will go ahead and merge this change as-is. If the need arises to support a wider range on these displays it can be revisited later. I suspect that need may never surface. |
Kannix2005
pushed a commit
to Kannix2005/Marlin-1
that referenced
this pull request
Dec 7, 2020
vgadreau
pushed a commit
to vgadreau/Marlin
that referenced
this pull request
Dec 9, 2020
RFBomb
pushed a commit
to RFBomb/Marlin
that referenced
this pull request
Dec 23, 2020
TheMichalcinOfficial
added a commit
to TheMichalcinOfficial/Marlin
that referenced
this pull request
Dec 28, 2020
* USB Media Host followup Restore HAS_SHARED_MEDIA * SMUFF (MMU2 clone) support (MarlinFirmware#19912) * [cron] Bump distribution date (2020-11-19) * Fix broken #include (MarlinFirmware#20193) * Use RTD for MAX31865 reading (MarlinFirmware#20188) * Abort print on media removal (MarlinFirmware#20200) * Fix Filament Change menu item labels (MarlinFirmware#20201) * Remaining Time followup (MarlinFirmware#20199) * Fix GTR NeoPixel pin with FYSETC Mini12864 (MarlinFirmware#20203) * Reduce RAM usage for TFT Color UI on SGen-L V2 (MarlinFirmware#20209) * Add Thermistor 20-21 notes (MarlinFirmware#19246) * MKS WiFi preliminary changes * More MKS WiFi * MKS WiFi strings * Fix Z label * Windows LPC Upload for non-admins (MarlinFirmware#20208) Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix DAC setDrvPct (MarlinFirmware#20205) * [cron] Bump distribution date (2020-11-20) * Longer LK Pro / Alfawise PRO board (MarlinFirmware#20185) * Missing header to use suicide() on LVGL UI (MarlinFirmware#20214) * SINGLE_TOUCH_NAVIGATION Follow Up (MarlinFirmware#20213) * Printrboard labels * [cron] Bump distribution date (2020-11-21) * Fix backward Filament (Presence) Sensor pulls (MarlinFirmware#20228) Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix bad SET_FAST_PWM_FREQ calls (MarlinFirmware#20227) * Superscript substitution (MarlinFirmware#20219) Co-authored-by: Scott Lahteine <[email protected]> * Power-Loss cleanup * BTN_ENC_EN for many boards (MarlinFirmware#19890) Enables CHECK_ENCODER_ACTIVE_SIGNAL for many more boards. Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Skip unnecessary (costly) SW Stepper Enable (MarlinFirmware#20218) Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix Load Filament wait (MarlinFirmware#20243) * Proper pullup/pulldown configurability (MarlinFirmware#20242) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-11-22) * Clear menu history for browse media on insert (MarlinFirmware#20236) Co-authored-by: Scott Lahteine <[email protected]> * Put "$3" on all tests * Move core conditionals earlier * Hide docker droppings * [cron] Bump distribution date (2020-11-23) * Fix UBL manual mesh adjust behavior (MarlinFirmware#20248) * Allow Status Message without LCD (MarlinFirmware#20246) * Fix dummy thermistors for Bed, Chamber, Probe (MarlinFirmware#20247) * Fix Z4 in ENABLE/DISABLE_AXIS_Z (MarlinFirmware#20256) This was accidentally broken in PR MarlinFirmware#20218 * [cron] Bump distribution date (2020-11-24) * LCD position in current units (MarlinFirmware#20145) * Set "lcd_move_e" index to fix the label (MarlinFirmware#20263) * Allow cold Filament Load/Unload with M302 P1 (MarlinFirmware#20262) Co-authored-by: Scott Lahteine <[email protected]> * No Z_MULTI_ENDSTOPS when HOMING_Z_WITH_PROBE (MarlinFirmware#20254) * Consistent Probe XY offset type * Cosmetic G29 ABL tweak * [cron] Bump distribution date (2020-11-25) * Update TOUCH_UI_LULZBOT_BIO wrappers * add missing header to use HAS_SD_HOST_DRIVE (MarlinFirmware#20270) * Fix COLOR_UI without TOUCH_SCREEN_CALIBRATION (MarlinFirmware#20269) * [cron] Bump distribution date (2020-11-26) * Probe Offset Wizard improvements (MarlinFirmware#20239) * Reduce warnings, extern "C" cleanup (MarlinFirmware#20279) * Retire HAL for STM32F4 / F7 (MarlinFirmware#20153) * Tweak some pin errors * MKS Robin E3 / E3D v1.1 (MarlinFirmware#20216) * Finish HAL/STM32 cpp wrappers * No auto debug for EEPROM_CHITCHAT * Optimize emergency parser check * Level Corners with Probe option (MarlinFirmware#20241) * [WIP] Fix Probe::offset_xy (MarlinFirmware#20290) Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-11-27) * M808 Repeat Markers (MarlinFirmware#20084) * FIX TMC menu message (MarlinFirmware#20294) * Fix BTT GTR 1.0 endstop/DIAG pins (MarlinFirmware#20296) * Fix G2/G3 arcs > 180° (MarlinFirmware#20292) * Group related homing options (MarlinFirmware#20283) Co-authored-by: Scott Lahteine <[email protected]> * Fix M73 LCD code typo (MarlinFirmware#20300) * [cron] Bump distribution date (2020-11-28) * [cron] Bump distribution date (2020-11-29) * Arc Direction followup for circles (MarlinFirmware#20314) * SKR E3 Turbo Controller Fan (MarlinFirmware#20320) * Fix STM32F1 'freeMemory()' warnings (MarlinFirmware#20319) * Leveling Fade Height default setting (MarlinFirmware#20316) * [cron] Bump distribution date (2020-11-30) * Adjust axis homed / trusted methods (MarlinFirmware#20323) * General cleanup * Increase E3V2 DWIN steps/mm range to 999.9 (MarlinFirmware#20324) * [cron] Bump distribution date (2020-12-01) * Prevent Watchdog reset writing Creality 4.x EEPROM (MarlinFirmware#20328) * Fix E3V2 Control Menu when returning from Info (MarlinFirmware#20338) * Tweak to EEPROM safe delay * [cron] Bump distribution date (2020-12-02) * Level Bed Corners is a sub-menu * Update to STM32 v10, optimize build (MarlinFirmware#20325) * Help hosts when password-locked (MarlinFirmware#20348) * Fix E3V2 DWIN Jerk Menu (MarlinFirmware#20352) * Fix E3V2 DWIN build without CLASSIC_JERK * Fix jerk edits applying to wrong index * Permit SD EEPROM emulation on E3V2 (MarlinFirmware#20353) * [cron] Bump distribution date (2020-12-03) * Fix circle arc condition (MarlinFirmware#20322) * Fix up start, monitor baud (MarlinFirmware#20326) * Consolidate common pin includes * Require minimum PlatformIO version (MarlinFirmware#20361) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-04) * Fix MESH_BED_LEVELING w/o SEGMENT_LEVELED_MOVES (MarlinFirmware#20363) * Loosen E on pause for fila-manipulation (MarlinFirmware#20346) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-05) * Don’t use near keyword as variable name (MarlinFirmware#20374) * Improved Longer3D LKx Pro board (MarlinFirmware#20372) Co-authored-by: mrv96 <[email protected]> * Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368) * Suspend Servos for STM32+NeoPixel (MarlinFirmware#19963) * Add Creality 4.5.2 board (MarlinFirmware#20378) Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-06) * Fix FYSETC S6 I2C EEPROM size (MarlinFirmware#20340) Both V1.2 and V2.0 boards have a 24LC16, which is a 2kB EEPROM. Co-authored-by: PingWin <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Creality 4.5.2 format and fix * Use 'nearby' for 'near' * ExtUI homing / leveling additions * Move G29 3-point startup earlier * Fix STM32F1 SERIAL_GET_TX_BUFFER_FREE * G28 tweaks * G28 followup * Avoid invalid memory optimizations (MarlinFirmware#20389) When building for AVR, merge-all-constants can incorrectly combine constants stored in flash with constants stored in RAM. These have different access requirements, leading to undefined behavior during execution. Co-authored-by: ellensp <[email protected]> * [cron] Bump distribution date (2020-12-07) * Fix fileExists, use openFailed * Watch idle() depth over 5 * More LPC P-string macros * Fix auto#.g file handling, add NO_SD_AUTOSTART (MarlinFirmware#20071) * Shorten Filament Load/Unload Strings to Fit on Graphical Displays (MarlinFirmware#20369) Co-authored-by: ellensp <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> * Allow BTT EXP-MOT be used with Displays that needs only EXP 1 (MarlinFirmware#20396) Co-authored-by: ellensp <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> * [cron] Bump distribution date (2020-12-08) * SPI TFT for STM32F4 boards (MarlinFirmware#20384) * fix pinsDebug for F1 boards * add MKS Robin PRO V2 board - development board * tft spi working with F4 boards * pins formating * sanity check for TFT on supported cores in STM32 * Fix tabs/spaces in pins file Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-09) * Style, spacing, typo cleanup for recent changes * Clarify Delta & SCARA config location (MarlinFirmware#20403) * Allow positive Z nozzle to probe offset (MarlinFirmware#20344) * Allow a positive value for z offset from nozzle to probe without sanity checks * Simplify menu_probe_offset.cpp (HOMING_Z_WITH_PROBE) * Add some more explanation to Configuration Files * Raise after probe_at_point as if homed Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Fix Spindle/Laser Control menu (MarlinFirmware#20347) * Fixes and additions to FTDI EVE Touch UI (MarlinFirmware#20393) - Fixed name conflict with "SUBSCRIPT_TWO" - Fixed rendering bugs in "Leveling Menu" - Only show "Bed Mesh Screen" when UBL is enabled - Removed CocoaPress code from generic "Main Menu" - Removed CocoaPress code from LulzBot Bio "Status" screen - Moved generic "Move Axis" functionality into a base class - Added CocoaPress custom screens: - Status Screen - Unload Cartridge - Load Chocolate - Main Menu - Advanced Settings - XYZ Move (based on "Move Axis" base class) - Extrusion Move (based on "Move Axis" base class) - CocoaPress tweaks to "Temperature" screen - Fix FTDI EVE Touch UI compilation errors when not using leveling. * Move ExtUI ABL mesh edit, limit to bilinear (MarlinFirmware#20381) * Move ExtUI call Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Sebastiaan Dammann <[email protected]> * MKS Robin Pins fixes for STM32 and STM32F1 (MarlinFirmware#20404) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-10) * Clarify "not Interrupt-capable" error message (MarlinFirmware#20419) * Fix UBL Debug Messages (MarlinFirmware#20423) Co-authored-by: ellensp <[email protected]> * [cron] Bump distribution date (2020-12-11) * Z_SENSORLESS sanity checks (MarlinFirmware#20421) Co-authored-by: Jason Smith <[email protected]> * Probe offset wizard fixes (MarlinFirmware#20414) * STOW probe, reverting incorrect earlier change from MarlinFirmware#20344 * Adjust soft endstop disables, to ensure travel below bed functions properly Co-authored-by: FanDjango <[email protected]> * SENSORLESS_PROBING sanity check followup (MarlinFirmware#20438) * [cron] Bump distribution date (2020-12-12) * Better animated boot screen * Fix SDCARD_SORT_ALPHA on Ender 3 V2 (MarlinFirmware#20443) * Add HAS_PIN_27_BOARD for CREALITY_V4 (MarlinFirmware#20446) Co-authored-by: ellensp <[email protected]> * Improve ASSISTED_TRAMMING_WIZARD probe stowing (MarlinFirmware#20437) * When BLTOUCH_HS_MODE enabled, stow pin before user interaction * For all probes, ensure probe stows at end of wizard * [cron] Bump distribution date (2020-12-13) * Probe Offset Wizard followupBack to PROBE_PT_RAISE/separate STOW, make "PROBING" msg appear (MarlinFirmware#20439) * Go back to always use PROBE_PT_RAISE with a discrete stow. This ensures a raise above the bed, while stowing prior to exiting the wizard. * Fix issue preventing text while moving to X/Y position Co-authored-by: FanDjango <[email protected]> * Adjust planner debugging * SHORT_MANUAL_Z_MOVE => FINE_MANUAL_MOVE * [cron] Bump distribution date (2020-12-14) * LPC176x framework update (MarlinFirmware#20469) * [cron] Bump distribution date (2020-12-15) * Fix formatting * Preheat before leveling * Always enable leveling after G28 * Trust that script -x flags will always be set (MarlinFirmware#20453) * Fix M1001 auto-check logic (MarlinFirmware#20456) * Auto-check followup * Please install the EditorConfig plugin * Fix RESTORE_LEVELING_AFTER_G28 (MarlinFirmware#20471) * Creality v4.5.3 (CR-6 SE, CR-6 MAX) (MarlinFirmware#20468) * Update some pins errors * Update some LCD includes * Trust STM32 gcc versions * [cron] Bump distribution date (2020-12-16) * Update Italian language (MarlinFirmware#20480) * Update Hungarian language Co-Authored-By: Zs.Antal <[email protected]> * Update French language (MarlinFirmware#20472) * [cron] Bump distribution date (2020-12-17) * Use homing_feedrate function * Homing feedrates as XYZ array (MarlinFirmware#20426) Co-authored-by: Scott Lahteine <[email protected]> * Fix ZoneStar LCD 2004 buttons (MarlinFirmware#20489) * Make M220 B / R a standard feature (MarlinFirmware#20355) * Balance CI tests (MarlinFirmware#20485) * Fix and optimize MightyBoard (MarlinFirmware#20493) * [cron] Bump distribution date (2020-12-18) * MKS Robin Nano V3 and STM32F4x0Vx Variant (MarlinFirmware#20430) * DOGM: Slow down touchscreen calibration (MarlinFirmware#20454) * [cron] Bump distribution date (2020-12-19) * Rename QUIET_PROBING * Tweaks for pins_BTT_SKR_common.h * [cron] Bump distribution date (2020-12-20) * Let boards set Default TMC Slave Addresses (MarlinFirmware#20498) Co-authored-by: Scott Lahteine <[email protected]> * Minimum temp options for Probing and G12 Nozzle Clean (MarlinFirmware#20383) Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Probe Tare, Probe Activation Switch (MarlinFirmware#20379) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Fix Creality EEPROM watchdog freq. (MarlinFirmware#20510) * Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 (MarlinFirmware#20354) * Languages cleanup * Update Russian and Ukrainian languages (MarlinFirmware#20508) * Fix PIO typo * [cron] Bump distribution date (2020-12-21) * Get E3V2 DWIN `MACHINE_SIZE` from config (MarlinFirmware#20526) * Apply HOME_AFTER_DEACTIVATE for 'G28 O' (MarlinFirmware#20525) * Clean up some pins * Add BTT SKR CR6 board (MarlinFirmware#20522) * Fix G34 compile with bed leveling disabled (MarlinFirmware#20537) * Fix some Russian (MarlinFirmware#20529) * Robin pins followup * Tweak FTDI spacing * Add Tune -> Advanced Settings to FTDI EVE (MarlinFirmware#20532) * [cron] Bump distribution date (2020-12-22) * 12-bit ADC resolution for STM32 (MarlinFirmware#20519) * FTDI EVE custom user menus (MarlinFirmware#20518) * Improve STM32 timer conflict messages (MarlinFirmware#20544) * Fix UBL mesh inset Z position (MarlinFirmware#20538) * Overrides to prevent STM32 timer conflicts (MarlinFirmware#20545) * Improve Touch Calibration screen (MarlinFirmware#20524) * Creality v4.3.1 (Ender 6) board (MarlinFirmware#20512) * Anet ET4 / ET4P and Anet TFT28 / TFT35 (MarlinFirmware#20280) * STM32F1xx support for TFTGLCD (MarlinFirmware#20515) * Unify FYSETC F6 1.3 / 1.4 (MarlinFirmware#20507) Co-authored-by: Scott Lahteine <[email protected]> * Fix G28 leveling state, UBL compile (MarlinFirmware#20499) * Support RGBW on PCA9632 (MarlinFirmware#20455) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-23) * Refactor 'Level Corners with Probe' (MarlinFirmware#20460) Co-authored-by: Scott Lahteine <[email protected]> * Improve plan_arc circle detection (MarlinFirmware#20440) Co-authored-by: Scott Lahteine <[email protected]> * FTDI EVE: Cyrillic font, some minor fixes (MarlinFirmware#20517) * Enhanced Italian language (MarlinFirmware#20551) * Probe Activation Switch followup (MarlinFirmware#20550) * Support ANET_FULL_GRAPHICS_LCD_ALT_WIRING on BTT SKR 1.4 (MarlinFirmware#20427) * Apply ENABLED in ExiUI / FTDI * Remaining Time for FTDI EVE, bp for ExtUI (MarlinFirmware#20549) Co-authored-by: Scott Lahteine <[email protected]> * Add OPTIMIZED_MESH_STORAGE option (for UBL) (MarlinFirmware#20371) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-24) * Move BTT_SKR_CR6 * LVGL and Classic UI for STM32 (MarlinFirmware#20552) * Add "End Repeat Loops" menu item * Fix DOGM status message scrolling (MarlinFirmware#20557) * Fix ST7920 timing for Rumba32, Fysetc S6 (MarlinFirmware#20556) * Fix, clean up FTDI EVE Touch UI (MarlinFirmware#20466) Co-Authored-By: Marcio T. <[email protected]> * Apply NO_MOTION_BEFORE_HOMING to joystick motion (MarlinFirmware#20462) Co-authored-by: Scott Lahteine <[email protected]> * Cutter Power in percent format (MarlinFirmware#20410) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Luu Lac <[email protected]> * [cron] Bump distribution date (2020-12-25) * [cron] Bump distribution date (2020-12-26) * [cron] Bump distribution date (2020-12-27) * Fix SPINDLE_LASER_FREQUENCY (MarlinFirmware#20509) * Fix some comments * Remove CREALITY_TOUCH * Add probe_switch_activated * Init tare pin once * [cron] Bump distribution date (2020-12-28) * Validate defined probe points (MarlinFirmware#20572) * General cleanup * Allow define HOMING_FEEDRATE_(XY|Z) * Remove URL scheme * Small / Large Boot Screen option for TFT_COLOR_UI (MarlinFirmware#20578) * Better defaults, compatibility for SDIO + STM32 (MarlinFirmware#20570) * Fix Menu Mixer for Color UI (MarlinFirmware#20566) * Use ADC_RESOLUTION 12 for all STM32 (MarlinFirmware#20562) * Fix LVGL_UI G-code preview (MarlinFirmware#20564) * Fix Change Filament menu actions (MarlinFirmware#20565) Co-authored-by: Scott Lahteine <[email protected]> * Menu item index followup Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: bosd <[email protected]> Co-authored-by: JoAnn Manges <[email protected]> Co-authored-by: Victor Oliveira <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: Maciej Rutkowski <[email protected]> Co-authored-by: Till <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Vitaliy <[email protected]> Co-authored-by: Orel <[email protected]> Co-authored-by: Ajtak <[email protected]> Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Simone Primarosa <[email protected]> Co-authored-by: Gurmeet Athwal <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: qwewer0 <[email protected]> Co-authored-by: rdhoggattjr <[email protected]> Co-authored-by: pseudex <[email protected]> Co-authored-by: swissnorp <[email protected]> Co-authored-by: mks-viva <[email protected]> Co-authored-by: wmariz <[email protected]> Co-authored-by: Štěpán Dalecký <[email protected]> Co-authored-by: BsCmOD <[email protected]> Co-authored-by: yysh12 <[email protected]> Co-authored-by: Sergey1560 <[email protected]> Co-authored-by: Thomas Niccolo Reyes <[email protected]> Co-authored-by: Alexander D. Kanevskiy <[email protected]> Co-authored-by: Mathias Rasmussen <[email protected]> Co-authored-by: Luu Lac <[email protected]> Co-authored-by: Belin Fieldson <[email protected]> Co-authored-by: Tanguy Pruvot <[email protected]> Co-authored-by: mrv96 <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: LinFor <[email protected]> Co-authored-by: PingWin <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Mike La Spina <[email protected]> Co-authored-by: Marcio T <[email protected]> Co-authored-by: Sebastiaan Dammann <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: elasticdotventures <[email protected]> Co-authored-by: FanDjango <[email protected]> Co-authored-by: FanDjango <[email protected]> Co-authored-by: leodoener <[email protected]> Co-authored-by: Chris Pepper <[email protected]> Co-authored-by: kisslorand <[email protected]> Co-authored-by: Zs.Antal <[email protected]> Co-authored-by: rafaljot <[email protected]> Co-authored-by: nb-rapidia <[email protected]> Co-authored-by: grauerfuchs <[email protected]> Co-authored-by: Foxies <[email protected]> Co-authored-by: Serhiy-K <[email protected]> Co-authored-by: Dick Streefland <[email protected]> Co-authored-by: cr20-123 <[email protected]> Co-authored-by: X-Ryl669 <[email protected]> Co-authored-by: Sean McGroty <[email protected]> Co-authored-by: Jan Krajdl <[email protected]> Co-authored-by: Darren Peter <[email protected]> Co-authored-by: ubik2 <[email protected]> Co-authored-by: Vi B-P <[email protected]> Co-authored-by: Ashammaru <[email protected]>
TheMichalcinOfficial
added a commit
to TheMichalcinOfficial/Marlin
that referenced
this pull request
Dec 30, 2020
* MKS WiFi preliminary changes * More MKS WiFi * MKS WiFi strings * Fix Z label * Windows LPC Upload for non-admins (MarlinFirmware#20208) Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix DAC setDrvPct (MarlinFirmware#20205) * [cron] Bump distribution date (2020-11-20) * Longer LK Pro / Alfawise PRO board (MarlinFirmware#20185) * Missing header to use suicide() on LVGL UI (MarlinFirmware#20214) * SINGLE_TOUCH_NAVIGATION Follow Up (MarlinFirmware#20213) * Printrboard labels * [cron] Bump distribution date (2020-11-21) * Fix backward Filament (Presence) Sensor pulls (MarlinFirmware#20228) Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix bad SET_FAST_PWM_FREQ calls (MarlinFirmware#20227) * Superscript substitution (MarlinFirmware#20219) Co-authored-by: Scott Lahteine <[email protected]> * Power-Loss cleanup * BTN_ENC_EN for many boards (MarlinFirmware#19890) Enables CHECK_ENCODER_ACTIVE_SIGNAL for many more boards. Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Skip unnecessary (costly) SW Stepper Enable (MarlinFirmware#20218) Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Fix Load Filament wait (MarlinFirmware#20243) * Proper pullup/pulldown configurability (MarlinFirmware#20242) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-11-22) * Clear menu history for browse media on insert (MarlinFirmware#20236) Co-authored-by: Scott Lahteine <[email protected]> * Put "$3" on all tests * Move core conditionals earlier * Hide docker droppings * [cron] Bump distribution date (2020-11-23) * Fix UBL manual mesh adjust behavior (MarlinFirmware#20248) * Allow Status Message without LCD (MarlinFirmware#20246) * Fix dummy thermistors for Bed, Chamber, Probe (MarlinFirmware#20247) * Fix Z4 in ENABLE/DISABLE_AXIS_Z (MarlinFirmware#20256) This was accidentally broken in PR MarlinFirmware#20218 * [cron] Bump distribution date (2020-11-24) * LCD position in current units (MarlinFirmware#20145) * Set "lcd_move_e" index to fix the label (MarlinFirmware#20263) * Allow cold Filament Load/Unload with M302 P1 (MarlinFirmware#20262) Co-authored-by: Scott Lahteine <[email protected]> * No Z_MULTI_ENDSTOPS when HOMING_Z_WITH_PROBE (MarlinFirmware#20254) * Consistent Probe XY offset type * Cosmetic G29 ABL tweak * [cron] Bump distribution date (2020-11-25) * Update TOUCH_UI_LULZBOT_BIO wrappers * add missing header to use HAS_SD_HOST_DRIVE (MarlinFirmware#20270) * Fix COLOR_UI without TOUCH_SCREEN_CALIBRATION (MarlinFirmware#20269) * [cron] Bump distribution date (2020-11-26) * Probe Offset Wizard improvements (MarlinFirmware#20239) * Reduce warnings, extern "C" cleanup (MarlinFirmware#20279) * Retire HAL for STM32F4 / F7 (MarlinFirmware#20153) * Tweak some pin errors * MKS Robin E3 / E3D v1.1 (MarlinFirmware#20216) * Finish HAL/STM32 cpp wrappers * No auto debug for EEPROM_CHITCHAT * Optimize emergency parser check * Level Corners with Probe option (MarlinFirmware#20241) * [WIP] Fix Probe::offset_xy (MarlinFirmware#20290) Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-11-27) * M808 Repeat Markers (MarlinFirmware#20084) * FIX TMC menu message (MarlinFirmware#20294) * Fix BTT GTR 1.0 endstop/DIAG pins (MarlinFirmware#20296) * Fix G2/G3 arcs > 180° (MarlinFirmware#20292) * Group related homing options (MarlinFirmware#20283) Co-authored-by: Scott Lahteine <[email protected]> * Fix M73 LCD code typo (MarlinFirmware#20300) * [cron] Bump distribution date (2020-11-28) * [cron] Bump distribution date (2020-11-29) * Arc Direction followup for circles (MarlinFirmware#20314) * SKR E3 Turbo Controller Fan (MarlinFirmware#20320) * Fix STM32F1 'freeMemory()' warnings (MarlinFirmware#20319) * Leveling Fade Height default setting (MarlinFirmware#20316) * [cron] Bump distribution date (2020-11-30) * Adjust axis homed / trusted methods (MarlinFirmware#20323) * General cleanup * Increase E3V2 DWIN steps/mm range to 999.9 (MarlinFirmware#20324) * [cron] Bump distribution date (2020-12-01) * Prevent Watchdog reset writing Creality 4.x EEPROM (MarlinFirmware#20328) * Fix E3V2 Control Menu when returning from Info (MarlinFirmware#20338) * Tweak to EEPROM safe delay * [cron] Bump distribution date (2020-12-02) * Level Bed Corners is a sub-menu * Update to STM32 v10, optimize build (MarlinFirmware#20325) * Help hosts when password-locked (MarlinFirmware#20348) * Fix E3V2 DWIN Jerk Menu (MarlinFirmware#20352) * Fix E3V2 DWIN build without CLASSIC_JERK * Fix jerk edits applying to wrong index * Permit SD EEPROM emulation on E3V2 (MarlinFirmware#20353) * [cron] Bump distribution date (2020-12-03) * Fix circle arc condition (MarlinFirmware#20322) * Fix up start, monitor baud (MarlinFirmware#20326) * Consolidate common pin includes * Require minimum PlatformIO version (MarlinFirmware#20361) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-04) * Fix MESH_BED_LEVELING w/o SEGMENT_LEVELED_MOVES (MarlinFirmware#20363) * Loosen E on pause for fila-manipulation (MarlinFirmware#20346) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-05) * Don’t use near keyword as variable name (MarlinFirmware#20374) * Improved Longer3D LKx Pro board (MarlinFirmware#20372) Co-authored-by: mrv96 <[email protected]> * Fix TMC_HOME_PHASE divide by zero (MarlinFirmware#20368) * Suspend Servos for STM32+NeoPixel (MarlinFirmware#19963) * Add Creality 4.5.2 board (MarlinFirmware#20378) Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-06) * Fix FYSETC S6 I2C EEPROM size (MarlinFirmware#20340) Both V1.2 and V2.0 boards have a 24LC16, which is a 2kB EEPROM. Co-authored-by: PingWin <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Creality 4.5.2 format and fix * Use 'nearby' for 'near' * ExtUI homing / leveling additions * Move G29 3-point startup earlier * Fix STM32F1 SERIAL_GET_TX_BUFFER_FREE * G28 tweaks * G28 followup * Avoid invalid memory optimizations (MarlinFirmware#20389) When building for AVR, merge-all-constants can incorrectly combine constants stored in flash with constants stored in RAM. These have different access requirements, leading to undefined behavior during execution. Co-authored-by: ellensp <[email protected]> * [cron] Bump distribution date (2020-12-07) * Fix fileExists, use openFailed * Watch idle() depth over 5 * More LPC P-string macros * Fix auto#.g file handling, add NO_SD_AUTOSTART (MarlinFirmware#20071) * Shorten Filament Load/Unload Strings to Fit on Graphical Displays (MarlinFirmware#20369) Co-authored-by: ellensp <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> * Allow BTT EXP-MOT be used with Displays that needs only EXP 1 (MarlinFirmware#20396) Co-authored-by: ellensp <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> * [cron] Bump distribution date (2020-12-08) * SPI TFT for STM32F4 boards (MarlinFirmware#20384) * fix pinsDebug for F1 boards * add MKS Robin PRO V2 board - development board * tft spi working with F4 boards * pins formating * sanity check for TFT on supported cores in STM32 * Fix tabs/spaces in pins file Co-authored-by: Jason Smith <[email protected]> * [cron] Bump distribution date (2020-12-09) * Style, spacing, typo cleanup for recent changes * Clarify Delta & SCARA config location (MarlinFirmware#20403) * Allow positive Z nozzle to probe offset (MarlinFirmware#20344) * Allow a positive value for z offset from nozzle to probe without sanity checks * Simplify menu_probe_offset.cpp (HOMING_Z_WITH_PROBE) * Add some more explanation to Configuration Files * Raise after probe_at_point as if homed Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Fix Spindle/Laser Control menu (MarlinFirmware#20347) * Fixes and additions to FTDI EVE Touch UI (MarlinFirmware#20393) - Fixed name conflict with "SUBSCRIPT_TWO" - Fixed rendering bugs in "Leveling Menu" - Only show "Bed Mesh Screen" when UBL is enabled - Removed CocoaPress code from generic "Main Menu" - Removed CocoaPress code from LulzBot Bio "Status" screen - Moved generic "Move Axis" functionality into a base class - Added CocoaPress custom screens: - Status Screen - Unload Cartridge - Load Chocolate - Main Menu - Advanced Settings - XYZ Move (based on "Move Axis" base class) - Extrusion Move (based on "Move Axis" base class) - CocoaPress tweaks to "Temperature" screen - Fix FTDI EVE Touch UI compilation errors when not using leveling. * Move ExtUI ABL mesh edit, limit to bilinear (MarlinFirmware#20381) * Move ExtUI call Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Sebastiaan Dammann <[email protected]> * MKS Robin Pins fixes for STM32 and STM32F1 (MarlinFirmware#20404) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-10) * Clarify "not Interrupt-capable" error message (MarlinFirmware#20419) * Fix UBL Debug Messages (MarlinFirmware#20423) Co-authored-by: ellensp <[email protected]> * [cron] Bump distribution date (2020-12-11) * Z_SENSORLESS sanity checks (MarlinFirmware#20421) Co-authored-by: Jason Smith <[email protected]> * Probe offset wizard fixes (MarlinFirmware#20414) * STOW probe, reverting incorrect earlier change from MarlinFirmware#20344 * Adjust soft endstop disables, to ensure travel below bed functions properly Co-authored-by: FanDjango <[email protected]> * SENSORLESS_PROBING sanity check followup (MarlinFirmware#20438) * [cron] Bump distribution date (2020-12-12) * Better animated boot screen * Fix SDCARD_SORT_ALPHA on Ender 3 V2 (MarlinFirmware#20443) * Add HAS_PIN_27_BOARD for CREALITY_V4 (MarlinFirmware#20446) Co-authored-by: ellensp <[email protected]> * Improve ASSISTED_TRAMMING_WIZARD probe stowing (MarlinFirmware#20437) * When BLTOUCH_HS_MODE enabled, stow pin before user interaction * For all probes, ensure probe stows at end of wizard * [cron] Bump distribution date (2020-12-13) * Probe Offset Wizard followupBack to PROBE_PT_RAISE/separate STOW, make "PROBING" msg appear (MarlinFirmware#20439) * Go back to always use PROBE_PT_RAISE with a discrete stow. This ensures a raise above the bed, while stowing prior to exiting the wizard. * Fix issue preventing text while moving to X/Y position Co-authored-by: FanDjango <[email protected]> * Adjust planner debugging * SHORT_MANUAL_Z_MOVE => FINE_MANUAL_MOVE * [cron] Bump distribution date (2020-12-14) * LPC176x framework update (MarlinFirmware#20469) * [cron] Bump distribution date (2020-12-15) * Fix formatting * Preheat before leveling * Always enable leveling after G28 * Trust that script -x flags will always be set (MarlinFirmware#20453) * Fix M1001 auto-check logic (MarlinFirmware#20456) * Auto-check followup * Please install the EditorConfig plugin * Fix RESTORE_LEVELING_AFTER_G28 (MarlinFirmware#20471) * Creality v4.5.3 (CR-6 SE, CR-6 MAX) (MarlinFirmware#20468) * Update some pins errors * Update some LCD includes * Trust STM32 gcc versions * [cron] Bump distribution date (2020-12-16) * Update Italian language (MarlinFirmware#20480) * Update Hungarian language Co-Authored-By: Zs.Antal <[email protected]> * Update French language (MarlinFirmware#20472) * [cron] Bump distribution date (2020-12-17) * Use homing_feedrate function * Homing feedrates as XYZ array (MarlinFirmware#20426) Co-authored-by: Scott Lahteine <[email protected]> * Fix ZoneStar LCD 2004 buttons (MarlinFirmware#20489) * Make M220 B / R a standard feature (MarlinFirmware#20355) * Balance CI tests (MarlinFirmware#20485) * Fix and optimize MightyBoard (MarlinFirmware#20493) * [cron] Bump distribution date (2020-12-18) * MKS Robin Nano V3 and STM32F4x0Vx Variant (MarlinFirmware#20430) * DOGM: Slow down touchscreen calibration (MarlinFirmware#20454) * [cron] Bump distribution date (2020-12-19) * Rename QUIET_PROBING * Tweaks for pins_BTT_SKR_common.h * [cron] Bump distribution date (2020-12-20) * Let boards set Default TMC Slave Addresses (MarlinFirmware#20498) Co-authored-by: Scott Lahteine <[email protected]> * Minimum temp options for Probing and G12 Nozzle Clean (MarlinFirmware#20383) Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> * Probe Tare, Probe Activation Switch (MarlinFirmware#20379) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Jason Smith <[email protected]> * Fix Creality EEPROM watchdog freq. (MarlinFirmware#20510) * Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 (MarlinFirmware#20354) * Languages cleanup * Update Russian and Ukrainian languages (MarlinFirmware#20508) * Fix PIO typo * [cron] Bump distribution date (2020-12-21) * Get E3V2 DWIN `MACHINE_SIZE` from config (MarlinFirmware#20526) * Apply HOME_AFTER_DEACTIVATE for 'G28 O' (MarlinFirmware#20525) * Clean up some pins * Add BTT SKR CR6 board (MarlinFirmware#20522) * Fix G34 compile with bed leveling disabled (MarlinFirmware#20537) * Fix some Russian (MarlinFirmware#20529) * Robin pins followup * Tweak FTDI spacing * Add Tune -> Advanced Settings to FTDI EVE (MarlinFirmware#20532) * [cron] Bump distribution date (2020-12-22) * 12-bit ADC resolution for STM32 (MarlinFirmware#20519) * FTDI EVE custom user menus (MarlinFirmware#20518) * Improve STM32 timer conflict messages (MarlinFirmware#20544) * Fix UBL mesh inset Z position (MarlinFirmware#20538) * Overrides to prevent STM32 timer conflicts (MarlinFirmware#20545) * Improve Touch Calibration screen (MarlinFirmware#20524) * Creality v4.3.1 (Ender 6) board (MarlinFirmware#20512) * Anet ET4 / ET4P and Anet TFT28 / TFT35 (MarlinFirmware#20280) * STM32F1xx support for TFTGLCD (MarlinFirmware#20515) * Unify FYSETC F6 1.3 / 1.4 (MarlinFirmware#20507) Co-authored-by: Scott Lahteine <[email protected]> * Fix G28 leveling state, UBL compile (MarlinFirmware#20499) * Support RGBW on PCA9632 (MarlinFirmware#20455) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-23) * Refactor 'Level Corners with Probe' (MarlinFirmware#20460) Co-authored-by: Scott Lahteine <[email protected]> * Improve plan_arc circle detection (MarlinFirmware#20440) Co-authored-by: Scott Lahteine <[email protected]> * FTDI EVE: Cyrillic font, some minor fixes (MarlinFirmware#20517) * Enhanced Italian language (MarlinFirmware#20551) * Probe Activation Switch followup (MarlinFirmware#20550) * Support ANET_FULL_GRAPHICS_LCD_ALT_WIRING on BTT SKR 1.4 (MarlinFirmware#20427) * Apply ENABLED in ExiUI / FTDI * Remaining Time for FTDI EVE, bp for ExtUI (MarlinFirmware#20549) Co-authored-by: Scott Lahteine <[email protected]> * Add OPTIMIZED_MESH_STORAGE option (for UBL) (MarlinFirmware#20371) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2020-12-24) * Move BTT_SKR_CR6 * LVGL and Classic UI for STM32 (MarlinFirmware#20552) * Add "End Repeat Loops" menu item * Fix DOGM status message scrolling (MarlinFirmware#20557) * Fix ST7920 timing for Rumba32, Fysetc S6 (MarlinFirmware#20556) * Fix, clean up FTDI EVE Touch UI (MarlinFirmware#20466) Co-Authored-By: Marcio T. <[email protected]> * Apply NO_MOTION_BEFORE_HOMING to joystick motion (MarlinFirmware#20462) Co-authored-by: Scott Lahteine <[email protected]> * Cutter Power in percent format (MarlinFirmware#20410) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Luu Lac <[email protected]> * [cron] Bump distribution date (2020-12-25) * [cron] Bump distribution date (2020-12-26) * [cron] Bump distribution date (2020-12-27) * Fix SPINDLE_LASER_FREQUENCY (MarlinFirmware#20509) * Fix some comments * Remove CREALITY_TOUCH * Add probe_switch_activated * Init tare pin once * [cron] Bump distribution date (2020-12-28) * Validate defined probe points (MarlinFirmware#20572) * General cleanup * Allow define HOMING_FEEDRATE_(XY|Z) * Remove URL scheme * Small / Large Boot Screen option for TFT_COLOR_UI (MarlinFirmware#20578) * Better defaults, compatibility for SDIO + STM32 (MarlinFirmware#20570) * Fix Menu Mixer for Color UI (MarlinFirmware#20566) * Use ADC_RESOLUTION 12 for all STM32 (MarlinFirmware#20562) * Fix LVGL_UI G-code preview (MarlinFirmware#20564) * Fix Change Filament menu actions (MarlinFirmware#20565) Co-authored-by: Scott Lahteine <[email protected]> * Menu item index followup * [cron] Bump distribution date (2020-12-29) * Apply SHOW_BOOTSCREEN to TFT_COLOR_UI (MarlinFirmware#20586) * LVGL G-code preview. Legacy MKS WiFi Cura plugin compatibility (MarlinFirmware#20589) * Clarify sanity-check for custom status bitmap (MarlinFirmware#20588) * Pins, comment cleanup * USB FD via native USB Host + MSC (MarlinFirmware#20571) * Support 4.3" (480x272) Color UI display (MarlinFirmware#20334) * [cron] Bump distribution date (2020-12-30) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Vitaliy <[email protected]> Co-authored-by: Victor Mateus Oliveira <[email protected]> Co-authored-by: Orel <[email protected]> Co-authored-by: thinkyhead <[email protected]> Co-authored-by: Ajtak <[email protected]> Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Kurt Haenen <[email protected]> Co-authored-by: Simone Primarosa <[email protected]> Co-authored-by: Gurmeet Athwal <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: qwewer0 <[email protected]> Co-authored-by: rdhoggattjr <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: pseudex <[email protected]> Co-authored-by: swissnorp <[email protected]> Co-authored-by: mks-viva <[email protected]> Co-authored-by: wmariz <[email protected]> Co-authored-by: Štěpán Dalecký <[email protected]> Co-authored-by: BsCmOD <[email protected]> Co-authored-by: yysh12 <[email protected]> Co-authored-by: Sergey1560 <[email protected]> Co-authored-by: Thomas Niccolo Reyes <[email protected]> Co-authored-by: Alexander D. Kanevskiy <[email protected]> Co-authored-by: Mathias Rasmussen <[email protected]> Co-authored-by: Luu Lac <[email protected]> Co-authored-by: Belin Fieldson <[email protected]> Co-authored-by: Tanguy Pruvot <[email protected]> Co-authored-by: mrv96 <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: LinFor <[email protected]> Co-authored-by: PingWin <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Mike La Spina <[email protected]> Co-authored-by: Marcio T <[email protected]> Co-authored-by: Sebastiaan Dammann <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: elasticdotventures <[email protected]> Co-authored-by: FanDjango <[email protected]> Co-authored-by: FanDjango <[email protected]> Co-authored-by: leodoener <[email protected]> Co-authored-by: Chris Pepper <[email protected]> Co-authored-by: kisslorand <[email protected]> Co-authored-by: JoAnn Manges <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: Zs.Antal <[email protected]> Co-authored-by: rafaljot <[email protected]> Co-authored-by: nb-rapidia <[email protected]> Co-authored-by: grauerfuchs <[email protected]> Co-authored-by: Foxies <[email protected]> Co-authored-by: Serhiy-K <[email protected]> Co-authored-by: Dick Streefland <[email protected]> Co-authored-by: cr20-123 <[email protected]> Co-authored-by: X-Ryl669 <[email protected]> Co-authored-by: Sean McGroty <[email protected]> Co-authored-by: Jan Krajdl <[email protected]> Co-authored-by: Darren Peter <[email protected]> Co-authored-by: ubik2 <[email protected]> Co-authored-by: Vi B-P <[email protected]> Co-authored-by: Ashammaru <[email protected]>
tharts
pushed a commit
to tharts/Marlin
that referenced
this pull request
Jan 6, 2021
dpreed
pushed a commit
to dpreed/Marlin_2.0.x
that referenced
this pull request
Feb 5, 2021
kpishere
pushed a commit
to kpishere/Marlin
that referenced
this pull request
Feb 19, 2021
zillarob
pushed a commit
to zillarob/Marlin
that referenced
this pull request
Feb 25, 2021
W4tel-BiDi
pushed a commit
to W4tel-BiDi/Marlin
that referenced
this pull request
Apr 5, 2021
thinkyhead
pushed a commit
to thinkyhead/Marlin
that referenced
this pull request
Apr 28, 2021
thinkyhead
pushed a commit
to thinkyhead/Marlin
that referenced
this pull request
Apr 29, 2021
thinkyhead
pushed a commit
that referenced
this pull request
Apr 30, 2021
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
The Ender 3 V2 DWIN display defaulted to only allowing adjustment of steps up to 2x the default from Configuration.h. This was inadequate for changes such as switching to a geared extruder. I have removed this limit and increased it to a fixed 999.9 steps/mm, which is the largest number which can be displayed without requiring additional formatting/layout work in the UI.
Benefits
Increases steps/mm flexibility for E3V2 DWIN users.
Configurations
E3V2_Example.zip
Related Issues
#20310