[pull] master from torvalds:master #28
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
The following backtrace is seen when running aspeed G5 kernels. WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x138/0x198 aspeed_gfx 1e6e6000.display: Device has not been registered. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1 Hardware name: Generic DT based system Backtrace: [<8010d6d0>] (dump_backtrace) from [<8010d9b8>] (show_stack+0x20/0x24) r7:00000009 r6:60000153 r5:00000000 r4:8119fa94 [<8010d998>] (show_stack) from [<80b8cb98>] (dump_stack+0xcc/0xec) [<80b8cacc>] (dump_stack) from [<80123ef0>] (__warn+0xd8/0xfc) r7:00000009 r6:80e62ed0 r5:00000000 r4:974c3ccc [<80123e18>] (__warn) from [<80123f98>] (warn_slowpath_fmt+0x84/0xc4) r9:00000009 r8:806a0140 r7:000008b9 r6:80e62ed0 r5:80e631f8 r4:974c2000 [<80123f18>] (warn_slowpath_fmt) from [<806a0140>] (drm_fbdev_generic_setup+0x138/0x198) r9:00000001 r8:9758fc10 r7:9758fc00 r6:00000000 r5:00000020 r4:9768a000 [<806a0008>] (drm_fbdev_generic_setup) from [<806d4558>] (aspeed_gfx_probe+0x204/0x32c) r7:9758fc00 r6:00000000 r5:00000000 r4:9768a000 [<806d4354>] (aspeed_gfx_probe) from [<806dfca0>] (platform_drv_probe+0x58/0xa8) Since commit 1aed950 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()"), drm_fbdev_generic_setup() must be called after drm_dev_register() to avoid the warning. Do that. Fixes: 1aed950 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()") Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Acked-by: Joel Stanley <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
There exists a sleep-while-atomic bug while accessing the dmabuf->name
under mutex in the dmabuffs_dname(). This is caused from the SELinux
permissions checks on a process where it tries to validate the inherited
files from fork() by traversing them through iterate_fd() (which
traverse files under spin_lock) and call
match_file(security/selinux/hooks.c) where the permission checks happen.
This audit information is logged using dump_common_audit_data() where it
calls d_path() to get the file path name. If the file check happen on
the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to
access dmabuf->name. The flow will be like below:
flush_unauthorized_files()
iterate_fd()
spin_lock() --> Start of the atomic section.
match_file()
file_has_perm()
avc_has_perm()
avc_audit()
slow_avc_audit()
common_lsm_audit()
dump_common_audit_data()
audit_log_d_path()
d_path()
dmabuffs_dname()
mutex_lock()--> Sleep while atomic.
Call trace captured (on 4.19 kernels) is below:
___might_sleep+0x204/0x208
__might_sleep+0x50/0x88
__mutex_lock_common+0x5c/0x1068
__mutex_lock_common+0x5c/0x1068
mutex_lock_nested+0x40/0x50
dmabuffs_dname+0xa0/0x170
d_path+0x84/0x290
audit_log_d_path+0x74/0x130
common_lsm_audit+0x334/0x6e8
slow_avc_audit+0xb8/0xf8
avc_has_perm+0x154/0x218
file_has_perm+0x70/0x180
match_file+0x60/0x78
iterate_fd+0x128/0x168
selinux_bprm_committing_creds+0x178/0x248
security_bprm_committing_creds+0x30/0x48
install_exec_creds+0x1c/0x68
load_elf_binary+0x3a4/0x14e0
search_binary_handler+0xb0/0x1e0
So, use spinlock to access dmabuf->name to avoid sleep-while-atomic.
Cc: <[email protected]> [5.3+]
Signed-off-by: Charan Teja Kalla <[email protected]>
Reviewed-by: Michael J. Ruhl <[email protected]>
Acked-by: Christian König <[email protected]>
[sumits: added comment to spinlock_t definition to avoid warning]
Signed-off-by: Sumit Semwal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
The assignment of metadata overwrote the new display resolution values, hence we'd miss the size actually changed and wouldn't redefine the surface. This would then lead to command buffer error when trying to update the screen target (due to the size mismatch), and result in a VM with black screen. Fixes: 504901d ("drm/vmwgfx: Refactor surface_define to use vmw_surface_metadata") Reviewed-by: Charmaine Lee <[email protected]> Signed-off-by: Roland Scheidegger <[email protected]> Cc: [email protected]
Both cmp_u32 and cmp_u64 are comparing the pointers instead of the value at those pointers. This will result in incorrect/unsorted list. Fix it by deferencing the pointers before comparison. Fixes: 4ba74e5 ("drm/i915/selftests: Verify frequency scaling with RPS") Fixes: 8757797 ("drm/i915/selftests: Repeat the rps clock frequency measurement") Cc: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2196dfe) Signed-off-by: Jani Nikula <[email protected]>
MI_STORE_REGISTER_MEM and MI_LOAD_REGISTER_MEM need to know which translation to use when saving restoring the engine general purpose registers to and from the GT scratch. Since GT scratch is mapped to ggtt, we need to set an additional bit in the command to use GTT. Fixes: daed3e4 ("drm/i915/perf: implement active wait for noa configurations") Suggested-by: Prathap Kumar Valsan <[email protected]> Signed-off-by: Umesh Nerlige Ramappa <[email protected]> Reviewed-by: Lionel Landwerlin <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Chris Wilson <[email protected]> (cherry picked from commit e43ff99) Signed-off-by: Jani Nikula <[email protected]>
We do not use the virtual engines for interrupts (they have physical components), but we do use them to decouple the fence signaling during submission. Currently, when we submit a completed request, we try to enable the interrupt handler for the virtual engine, but we never disarm it. A quick fix is then to mark the irq as enabled, and it will then remain enabled -- and this prevents us from waking the device and never letting it sleep again. Fixes: f8db4d0 ("drm/i915: Initialise breadcrumb lists on the virtual engine") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: <[email protected]> # v5.5+ Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4fe6abb) Signed-off-by: Jani Nikula <[email protected]>
The danger in switching at random upon intel_context_pin is that the context may still actually be inflight, as it will not be scheduled out until a context switch after it is complete -- that may be a long time after we do a final intel_context_unpin. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2118 Fixes: 6d06779 ("drm/i915: Load balancing across a virtual engine") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: <[email protected]> # v5.3+ Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 90a9872) Signed-off-by: Jani Nikula <[email protected]>
This fixes the following KASAN splash on module reload:
[ 145.136327] ==================================================================
[ 145.136502] BUG: KASAN: use-after-free in intel_hdmi_destroy+0x74/0x80 [i915]
[ 145.136514] Read of size 8 at addr ffff888216641830 by task kworker/1:1/134
[ 145.136535] CPU: 1 PID: 134 Comm: kworker/1:1 Tainted: G U T 5.5.0-rc7-valkyria+ #5783
[ 145.136539] Hardware name: GIGABYTE GB-BKi3A-7100/MFLP3AP-00, BIOS F1 07/27/2016
[ 145.136546] Workqueue: events drm_connector_free_work_fn
[ 145.136551] Call Trace:
[ 145.136560] dump_stack+0xa1/0xe0
[ 145.136571] print_address_description.constprop.0+0x1e/0x210
[ 145.136639] ? intel_hdmi_destroy+0x74/0x80 [i915]
[ 145.136703] ? intel_hdmi_destroy+0x74/0x80 [i915]
[ 145.136710] __kasan_report.cold+0x1b/0x37
[ 145.136790] ? intel_hdmi_destroy+0x74/0x80 [i915]
[ 145.136863] ? intel_hdmi_destroy+0x74/0x80 [i915]
[ 145.136870] kasan_report+0x27/0x30
[ 145.136881] __asan_report_load8_noabort+0x1c/0x20
[ 145.136946] intel_hdmi_destroy+0x74/0x80 [i915]
[ 145.136954] drm_connector_free_work_fn+0xd1/0x100
[ 145.136967] process_one_work+0x86e/0x1610
[ 145.136987] ? pwq_dec_nr_in_flight+0x2f0/0x2f0
[ 145.137004] ? move_linked_works+0x128/0x2c0
[ 145.137021] worker_thread+0x63e/0xc90
[ 145.137048] kthread+0x2f6/0x3f0
[ 145.137054] ? calculate_sigpending+0x81/0xa0
[ 145.137059] ? process_one_work+0x1610/0x1610
[ 145.137064] ? kthread_bind+0x40/0x40
[ 145.137075] ret_from_fork+0x24/0x30
[ 145.137111] Allocated by task 0:
[ 145.137119] (stack is not available)
[ 145.137137] Freed by task 5053:
[ 145.137147] save_stack+0x28/0x90
[ 145.137152] __kasan_slab_free+0x136/0x180
[ 145.137157] kasan_slab_free+0x26/0x30
[ 145.137161] kfree+0xe6/0x350
[ 145.137242] intel_ddi_encoder_destroy+0x60/0x80 [i915]
[ 145.137252] drm_mode_config_cleanup+0x11d/0x8f0
[ 145.137329] intel_modeset_driver_remove+0x1f5/0x350 [i915]
[ 145.137403] i915_driver_remove+0xc4/0x130 [i915]
[ 145.137482] i915_pci_remove+0x3e/0x90 [i915]
[ 145.137489] pci_device_remove+0x108/0x2d0
[ 145.137494] device_release_driver_internal+0x1e6/0x4a0
[ 145.137499] driver_detach+0xcb/0x198
[ 145.137503] bus_remove_driver+0xde/0x204
[ 145.137508] driver_unregister+0x6d/0xa0
[ 145.137513] pci_unregister_driver+0x2e/0x230
[ 145.137576] i915_exit+0x1f/0x26 [i915]
[ 145.137157] kasan_slab_free+0x26/0x30
[ 145.137161] kfree+0xe6/0x350
[ 145.137242] intel_ddi_encoder_destroy+0x60/0x80 [i915]
[ 145.137252] drm_mode_config_cleanup+0x11d/0x8f0
[ 145.137329] intel_modeset_driver_remove+0x1f5/0x350 [i915]
[ 145.137403] i915_driver_remove+0xc4/0x130 [i915]
[ 145.137482] i915_pci_remove+0x3e/0x90 [i915]
[ 145.137489] pci_device_remove+0x108/0x2d0
[ 145.137494] device_release_driver_internal+0x1e6/0x4a0
[ 145.137499] driver_detach+0xcb/0x198
[ 145.137503] bus_remove_driver+0xde/0x204
[ 145.137508] driver_unregister+0x6d/0xa0
[ 145.137513] pci_unregister_driver+0x2e/0x230
[ 145.137576] i915_exit+0x1f/0x26 [i915]
[ 145.137581] __x64_sys_delete_module+0x35b/0x470
[ 145.137586] do_syscall_64+0x99/0x4e0
[ 145.137591] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 145.137606] The buggy address belongs to the object at ffff888216640000
which belongs to the cache kmalloc-8k of size 8192
[ 145.137618] The buggy address is located 6192 bytes inside of
8192-byte region [ffff888216640000, ffff888216642000)
[ 145.137630] The buggy address belongs to the page:
[ 145.137640] page:ffffea0008599000 refcount:1 mapcount:0 mapping:ffff888107c02a80 index:0xffff888216644000 compound_mapcount: 0
[ 145.137647] raw: 0200000000010200 0000000000000000 0000000100000001 ffff888107c02a80
[ 145.137652] raw: ffff888216644000 0000000080020001 00000001ffffffff 0000000000000000
[ 145.137656] page dumped because: kasan: bad access detected
[ 145.137668] Memory state around the buggy address:
[ 145.137678] ffff888216641700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 145.137687] ffff888216641780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 145.137697] >ffff888216641800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 145.137706] ^
[ 145.137715] ffff888216641880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 145.137724] ffff888216641900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 145.137733] ==================================================================
[ 145.137742] Disabling lock debugging due to kernel taint
Changes since v1:
- Add fixes tags.
- Use early unregister.
Signed-off-by: Maarten Lankhorst <[email protected]>
Fixes: 9c22912 ("drm/i915: hdmi: add CEC notifier to intel_hdmi")
Cc: <[email protected]> # v4.19+
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a581483)
Signed-off-by: Jani Nikula <[email protected]>
Currently we're failing to recalculate the gen9 FBC w/a stride
unless something more drastic than just the modifier itself has
changed. This often leaves us with FBC enabled with the linear
fbdev framebuffer without the w/a stride enabled. That will cause
an immediate underrun and FBC will get promptly disabled.
Fix the problem by checking if the w/a stride is about to change,
and go through the full dance if so. This part of the FBC code
is still pretty much a disaster and will need lots more work.
But this should at least fix the immediate issue.
v2: Deactivate FBC when the modifier changes since that will
likely require resetting the w/a CFB stride
Cc: [email protected]
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: José Roberto de Souza <[email protected]>
(cherry picked from commit 0428ab0)
Signed-off-by: Jani Nikula <[email protected]>
During preemption test for gfx10, it uses kiq to trigger gfx preemption, which would result in race condition with flushing TLB for kiq. Signed-off-by: Jack Xiao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Remove signaled jobs from job list and ensure the job was indeed preempted. Signed-off-by: Jack Xiao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Prevents a warning in the MST create connector case. v2: create global fake encoders rather per connector fake encoders to avoid running out of encoder indices. v3: use the actual number of crtcs on the asic rather than the max to conserve encoders. v4: v3 plus missing hunk I forgot to git add. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1108 Fixes: c6385e5 ("drm/amdgpu: drop legacy drm load and unload callbacks") Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.7.x
…isplay connected [Why] amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated for very connector. Real eDP caps will be overwritten by other external display. For OLED panel, caps->aux_support is set to 1 for OLED pnael. after external connected, caps+.aux_support is set to 0. This causes OLED backlight adjustment not work. [How] within update_conector_ext_caps, backlight caps will be updated only for eDP connector. Cc: [email protected] Signed-off-by: hersen wu <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
[Why] Failing to allocate a transfer function during stream construction leads to a null pointer dereference [How] Handle the failed allocation by failing the stream construction Cc: [email protected] Signed-off-by: Josip Pavic <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
…le mode I consulted Cai Land([email protected]), he told me corresponding smc message name to fSMC_MSG_SetWorkloadMask() is "PPSMC_MSG_ActiveProcessNotify" in firmware code of Renoir. Strange though it may seem, but it's a fact. Signed-off-by: chen gong <[email protected]> Reviewed-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
"u64 *wptr" points to the the wptr value in write back buffer and "*wptr = (*wptr) >> 2;" results in the value being overwritten each time when ->get_wptr() is called. umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and decode ring content and it is affected by this issue. fix and simplify the logic similar as sdma_v4_0_ring_get_wptr(). v2: fix for sdma5.2 as well v3: drop sdma 5.2 changes for 5.8 and stable Suggested-by: Le Ma <[email protected]> Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
…and/linux into drm-fixes fix for black screens Signed-off-by: Dave Airlie <[email protected]> From: "Roland Scheidegger (VMware)" <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
…g/drm/drm-misc into drm-fixes * aspeed: setup fbdev console after registering device; avoids warning and stacktrace in dmesg log * dmabuf: protect dmabuf->name with a spinlock; avoids sleeping in atomic context Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20200715171756.GA18606@linux-uq9g
…rg/drm/drm-intel into drm-fixes drm/i915 fixes for v5.8-rc6: - FBC w/a stride fix - Fix use-after-free fix on module reload - Ignore irq enabling on the virtual engines to fix device sleep - Use GTT when saving/restoring engine GPR - Fix selftest sort function Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
…org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-07-15: amdgpu: - Fix a race condition with KIQ - Preemption fix - Fix handling of fake MST encoders - OLED panel fix - Handle allocation failure in stream construction - Renoir SMC fix - SDMA 5.x fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
…rm/drm into master Pull drm fixes from Dave Airlie: "Weekly fixes pull, big bigger than I'd normally like, but they are fairly scattered and small individually. The vmwgfx one is a black screen regression, otherwise the largest is an MST encoder fix for amdgpu which results in a WARN in some cases, and a scattering of i915 fixes. I'm tracking two regressions at the moment that hopefully we get nailed down this week for rc7. dma-buf: - sleeping atomic fix amdgpu: - Fix a race condition with KIQ - Preemption fix - Fix handling of fake MST encoders - OLED panel fix - Handle allocation failure in stream construction - Renoir SMC fix - SDMA 5.x fix i915: - FBC w/a stride fix - Fix use-after-free fix on module reload - Ignore irq enabling on the virtual engines to fix device sleep - Use GTT when saving/restoring engine GPR - Fix selftest sort function vmwgfx: - black screen fix aspeed: - fbcon init warn fix" * tag 'drm-fixes-2020-07-17-1' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr() drm/amdgpu/powerplay: Modify SMC message name for setting power profile mode drm/amd/display: handle failed allocation during stream construction drm/amd/display: OLED panel backlight adjust not work with external display connected drm/amdgpu/display: create fake mst encoders ahead of time (v4) drm/amdgpu: fix preemption unit test drm/amdgpu/gfx10: fix race condition for kiq drm/i915: Recalculate FBC w/a stride when needed drm/i915: Move cec_notifier to intel_hdmi_connector_unregister, v2. drm/i915/gt: Only swap to a random sibling once upon creation drm/i915/gt: Ignore irq enabling on the virtual engines drm/i915/perf: Use GTT when saving/restoring engine GPR drm/i915/selftests: Fix compare functions provided for sorting drm/vmwgfx: fix update of display surface when resolution changes dmabuf: use spinlock to access dmabuf->name drm/aspeed: Call drm_fbdev_generic_setup after drm_dev_register
pull bot
pushed a commit
that referenced
this pull request
Aug 5, 2020
The following deadlock was captured. The first process is holding 'kernfs_mutex' and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device, this pending bio list would be flushed by second process 'md127_raid1', but it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace sysfs_notify() can fix it. There were other sysfs_notify() invoked from io path, removed all of them. PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file" #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06 #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6 #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs] #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs] #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs] #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs] #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs] #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs] #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a #16 [ffffb87c4df37958] new_slab at ffffffff9a251430 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905 RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890 RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0 R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1" #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06 #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013 #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83 #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696 #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1] #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344 Signed-off-by: Junxiao Bi <[email protected]> Signed-off-by: Song Liu <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Dec 15, 2020
Add kernel command line and last breaking event. The kernel command line is taken from early_command_line and printed only if kernel is not running as protected virtualization guest and if it has been already initialized from the "COMMAND_LINE". Linux version 5.10.0-rc3-22794-gecaa72788df0-dirty (gor@tuxmaker) #28 SMP PREEMPT Mon Nov 9 17:41:20 CET 2020 Kernel command line: audit_enable=0 audit=0 selinux=0 crashkernel=296M root=/dev/dasda1 dasd=ec5b memblock=debug die Kernel fault: interruption code 0005 ilc:2 PSW : 0000000180000000 0000000000012f92 (parse_boot_command_line+0x27a/0x46c) R:0 T:0 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 RI:0 EA:3 GPRS: 0000000000000000 00ffffffffffffff 0000000000000000 000000000001a65c 000000000000bf60 0000000000000000 00000000000003c0 0000000000000000 0000000000000080 000000000002322d 000000007f29ef20 0000000000efd018 000000000311c000 0000000000010070 0000000000012f82 000000000000bea8 Call Trace: (sp:000000000000bea8 [<000000000002016e>] 000000000002016e) sp:000000000000bf18 [<0000000000012408>] startup_kernel+0x88/0x2fc sp:000000000000bf60 [<00000000000100c4>] startup_normal+0xb0/0xb0 Last Breaking-Event-Address: [<00000000000135ba>] strcmp+0x22/0x24 Reviewed-by: Alexander Egorenkov <[email protected]> Acked-by: Viktor Mihajlovski <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
May 5, 2021
Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Acked-By: Anton Ivanov <[email protected]> Tested-By: Ritesh Raj Sarraf <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
May 22, 2021
…xtent When cloning an inline extent there are a few cases, such as when we have an implicit hole at file offset 0, where we start a transaction while holding a read lock on a leaf. Starting the transaction results in a call to sb_start_intwrite(), which results in doing a read lock on a percpu semaphore. Lockdep doesn't like this and complains about it: [46.580704] ====================================================== [46.580752] WARNING: possible circular locking dependency detected [46.580799] 5.13.0-rc1 #28 Not tainted [46.580832] ------------------------------------------------------ [46.580877] cloner/3835 is trying to acquire lock: [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0 [46.581167] [46.581167] but task is already holding lock: [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.581293] [46.581293] which lock already depends on the new lock. [46.581293] [46.581351] [46.581351] the existing dependency chain (in reverse order) is: [46.581410] [46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}: [46.581464] down_read_nested+0x68/0x200 [46.581536] __btrfs_tree_read_lock+0x70/0x1d0 [46.581577] btrfs_read_lock_root_node+0x88/0x200 [46.581623] btrfs_search_slot+0x298/0xb70 [46.581665] btrfs_set_inode_index+0xfc/0x260 [46.581708] btrfs_new_inode+0x26c/0x950 [46.581749] btrfs_create+0xf4/0x2b0 [46.581782] lookup_open.isra.57+0x55c/0x6a0 [46.581855] path_openat+0x418/0xd20 [46.581888] do_filp_open+0x9c/0x130 [46.581920] do_sys_openat2+0x2ec/0x430 [46.581961] do_sys_open+0x90/0xc0 [46.581993] system_call_exception+0x3d4/0x410 [46.582037] system_call_common+0xec/0x278 [46.582078] [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}: [46.582135] __lock_acquire+0x1e90/0x2c50 [46.582176] lock_acquire+0x2b4/0x5b0 [46.582263] start_transaction+0x3cc/0x950 [46.582308] clone_copy_inline_extent+0xe4/0x5a0 [46.582353] btrfs_clone+0x5fc/0x880 [46.582388] btrfs_clone_files+0xd8/0x1c0 [46.582434] btrfs_remap_file_range+0x3d8/0x590 [46.582481] do_clone_file_range+0x10c/0x270 [46.582558] vfs_clone_file_range+0x1b0/0x310 [46.582605] ioctl_file_clone+0x90/0x130 [46.582651] do_vfs_ioctl+0x874/0x1ac0 [46.582697] sys_ioctl+0x6c/0x120 [46.582733] system_call_exception+0x3d4/0x410 [46.582777] system_call_common+0xec/0x278 [46.582822] [46.582822] other info that might help us debug this: [46.582822] [46.582888] Possible unsafe locking scenario: [46.582888] [46.582942] CPU0 CPU1 [46.582984] ---- ---- [46.583028] lock(btrfs-tree-00); [46.583062] lock(sb_internal#2); [46.583119] lock(btrfs-tree-00); [46.583174] lock(sb_internal#2); [46.583212] [46.583212] *** DEADLOCK *** [46.583212] [46.583266] 6 locks held by cloner/3835: [46.583299] #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130 [46.583382] #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0 [46.583477] #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0 [46.583574] #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590 [46.583657] #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590 [46.583743] #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.583828] [46.583828] stack backtrace: [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28 [46.583931] Call Trace: [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable) [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400 [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190 [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50 [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0 [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950 [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0 [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880 [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0 [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590 [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270 [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310 [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130 [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0 [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120 [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410 [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278 [46.585114] --- interrupt: c00 at 0x7ffff7e22990 [46.585160] NIP: 00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000 [46.585224] REGS: c0000000167c7e80 TRAP: 0c00 Not tainted (5.13.0-rc1) [46.585280] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000244 XER: 00000000 [46.585374] IRQMASK: 0 [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004 [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000 [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000 [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000 [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004 [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990 [46.585964] LR [00000001000010ec] 0x1000010ec [46.586010] --- interrupt: c00 This should be a false positive, as both locks are acquired in read mode. Nevertheless, we don't need to hold a leaf locked when we start the transaction, so just release the leaf (path) before starting it. Reported-by: Ritesh Harjani <[email protected]> Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Jul 5, 2021
An srcu_struct structure that is initialized before rcu_init_geometry()
will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once
rcu_init_geometry() is called, this hierarchy is compressed as needed
for the actual maximum number of CPUs for this system.
Later on, that srcu_struct structure is confused, sometimes referring
to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead
to the new num_possible_cpus() hierarchy. For example, each of its
->mynode fields continues to reference the original leaf rcu_node
structures, some of which might no longer exist. On the other hand,
srcu_for_each_node_breadth_first() traverses to the new node hierarchy.
There are at least two bad possible outcomes to this:
1) a) A callback enqueued early on an srcu_data structure (call it
*sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in
srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf
(say 3 levels).
b) The grace period ends after rcu_init_geometry() shrinks the
nodes level to a single one. srcu_gp_end() walks through the new
srcu_node hierarchy without ever reaching the old leaves so the
callback is never executed.
This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32
and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests
verification never completes and the boot hangs:
[ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds.
[ 5413.147564] Not tainted 5.12.0-rc4+ #28
[ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5413.159753] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000
[ 5413.168099] Call Trace:
[ 5413.170555] __schedule+0x36c/0x930
[ 5413.174057] ? wait_for_completion+0x88/0x110
[ 5413.178423] schedule+0x46/0xf0
[ 5413.181575] schedule_timeout+0x284/0x380
[ 5413.185591] ? wait_for_completion+0x88/0x110
[ 5413.189957] ? mark_held_locks+0x61/0x80
[ 5413.193882] ? mark_held_locks+0x61/0x80
[ 5413.197809] ? _raw_spin_unlock_irq+0x24/0x50
[ 5413.202173] ? wait_for_completion+0x88/0x110
[ 5413.206535] wait_for_completion+0xb4/0x110
[ 5413.210724] ? srcu_torture_stats_print+0x110/0x110
[ 5413.215610] srcu_barrier+0x187/0x200
[ 5413.219277] ? rcu_tasks_verify_self_tests+0x50/0x50
[ 5413.224244] ? rdinit_setup+0x2b/0x2b
[ 5413.227907] rcu_verify_early_boot_tests+0x2d/0x40
[ 5413.232700] do_one_initcall+0x63/0x310
[ 5413.236541] ? rdinit_setup+0x2b/0x2b
[ 5413.240207] ? rcu_read_lock_sched_held+0x52/0x80
[ 5413.244912] kernel_init_freeable+0x253/0x28f
[ 5413.249273] ? rest_init+0x250/0x250
[ 5413.252846] kernel_init+0xa/0x110
[ 5413.256257] ret_from_fork+0x22/0x30
2) An srcu_struct structure that is initialized before rcu_init_geometry()
and used afterward will always have stale rdp->mynode references,
resulting in callbacks to be missed in srcu_gp_end(), just like in
the previous scenario.
This commit therefore causes init_srcu_struct_nodes to initialize the
geometry, if needed. This ensures that the srcu_node hierarchy is
properly built and distributed from the get-go.
Suggested-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Jul 5, 2021
When setting up a read or write to the OPB memory space, we must perform
five or six AHB writes. The ordering of these up until the trigger write
does not matter, so use writel_relaxed.
The generated code goes from (Debian GCC 10.2.1-6):
mov r8, r3
mcr 15, 0, sl, cr7, cr10, {4}
str sl, [r6, #20]
mcr 15, 0, sl, cr7, cr10, {4}
str r3, [r6, #24]
mcr 15, 0, sl, cr7, cr10, {4}
str r1, [r6, #28]
mcr 15, 0, sl, cr7, cr10, {4}
str r2, [r6, #32]
mcr 15, 0, sl, cr7, cr10, {4}
mov r1, #1
str r1, [r6, #64] ; 0x40
mcr 15, 0, sl, cr7, cr10, {4}
str r1, [r6, #4]
to this:
str r3, [r7, #20]
str r2, [r7, #24]
str r1, [r7, #28]
str r3, [r7, #64]
mov r8, #0
mcr 15, 0, r8, cr7, cr10, {4}
str r3, [r7, #4]
Signed-off-by: Joel Stanley <[email protected]>
Acked-by: Jeremy Kerr <[email protected]>
Reviewed-by: Eddie James <[email protected]>
Tested-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joel Stanley <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Sep 3, 2021
cpu_cpu_map holds all the CPUs in the DIE. However in PowerPC, when onlining/offlining of CPUs, this mask doesn't get updated. This mask is however updated when CPUs are added/removed. So when both operations like online/offline of CPUs and adding/removing of CPUs are done simultaneously, then cpumaps end up broken. WARNING: CPU: 13 PID: 1142 at kernel/sched/topology.c:898 build_sched_domains+0xd48/0x1720 Modules linked in: rpadlpar_io rpaphp mptcp_diag xsk_diag tcp_diag udp_diag raw_diag inet_diag unix_diag af_packet_diag netlink_diag bonding tls nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set rfkill nf_tables nfnetlink pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 13 PID: 1142 Comm: kworker/13:2 Not tainted 5.13.0-rc6+ #28 Workqueue: events cpuset_hotplug_workfn NIP: c0000000001caac8 LR: c0000000001caac4 CTR: 00000000007088ec REGS: c00000005596f220 TRAP: 0700 Not tainted (5.13.0-rc6+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48828222 XER: 00000009 CFAR: c0000000001ea698 IRQMASK: 0 GPR00: c0000000001caac4 c00000005596f4c0 c000000001c4a400 0000000000000036 GPR04: 00000000fffdffff c00000005596f1d0 0000000000000027 c0000018cfd07f90 GPR08: 0000000000000023 0000000000000001 0000000000000027 c0000018fe68ffe8 GPR12: 0000000000008000 c00000001e9d1880 c00000013a047200 0000000000000800 GPR16: c000000001d3c7d0 0000000000000240 0000000000000048 c000000010aacd18 GPR20: 0000000000000001 c000000010aacc18 c00000013a047c00 c000000139ec2400 GPR24: 0000000000000280 c000000139ec2520 c000000136c1b400 c000000001c93060 GPR28: c00000013a047c20 c000000001d3c6c0 c000000001c978a0 000000000000000d NIP [c0000000001caac8] build_sched_domains+0xd48/0x1720 LR [c0000000001caac4] build_sched_domains+0xd44/0x1720 Call Trace: [c00000005596f4c0] [c0000000001caac4] build_sched_domains+0xd44/0x1720 (unreliable) [c00000005596f670] [c0000000001cc5ec] partition_sched_domains_locked+0x3ac/0x4b0 [c00000005596f710] [c0000000002804e4] rebuild_sched_domains_locked+0x404/0x9e0 [c00000005596f810] [c000000000283e60] rebuild_sched_domains+0x40/0x70 [c00000005596f840] [c000000000284124] cpuset_hotplug_workfn+0x294/0xf10 [c00000005596fc60] [c000000000175040] process_one_work+0x290/0x590 [c00000005596fd00] [c0000000001753c8] worker_thread+0x88/0x620 [c00000005596fda0] [c000000000181704] kthread+0x194/0x1a0 [c00000005596fe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70 Instruction dump: 485af049 60000000 2fa30800 409e0028 80fe0000 e89a00f8 e86100e8 38da0120 7f88e378 7ce53b78 4801fb91 60000000 <0fe00000> 39000000 38e00000 38c00000 Fix this by updating cpu_cpu_map aka cpumask_of_node() on every CPU online/offline. Signed-off-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
pull bot
pushed a commit
that referenced
this pull request
Jul 3, 2022
kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency. Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
pull bot
pushed a commit
that referenced
this pull request
Jul 29, 2022
This fixes the following trace which is caused by hci_rx_work starting up *after* the final channel reference has been put() during sock_close() but *before* the references to the channel have been destroyed, so instead the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed. refcount_t: increment on 0; use-after-free. BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0 Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705 CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W 4.14.234-00003-g1fb6d0bd49a4-dirty #28 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM sm8150 Flame DVT (DT) Workqueue: hci0 hci_rx_work Call trace: dump_backtrace+0x0/0x378 show_stack+0x20/0x2c dump_stack+0x124/0x148 print_address_description+0x80/0x2e8 __kasan_report+0x168/0x188 kasan_report+0x10/0x18 __asan_load4+0x84/0x8c refcount_dec_and_test+0x20/0xd0 l2cap_chan_put+0x48/0x12c l2cap_recv_frame+0x4770/0x6550 l2cap_recv_acldata+0x44c/0x7a4 hci_acldata_packet+0x100/0x188 hci_rx_work+0x178/0x23c process_one_work+0x35c/0x95c worker_thread+0x4cc/0x960 kthread+0x1a8/0x1c4 ret_from_fork+0x10/0x18 Cc: [email protected] Reported-by: Lee Jones <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Lee Jones <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Aug 24, 2022
The assumption in __disable_kprobe() is wrong, and it could try to disarm
an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can
easily reproduce this issue.
1. Write 0 to /sys/kernel/debug/kprobes/enabled.
# echo 0 > /sys/kernel/debug/kprobes/enabled
2. Run execsnoop. At this time, one kprobe is disabled.
# /usr/share/bcc/tools/execsnoop &
[1] 2460
PCOMM PID PPID RET ARGS
# cat /sys/kernel/debug/kprobes/list
ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE]
ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE]
3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes
kprobes_all_disarmed to false but does not arm the disabled kprobe.
# echo 1 > /sys/kernel/debug/kprobes/enabled
# cat /sys/kernel/debug/kprobes/list
ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE]
ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE]
4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the
disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace().
# fg
/usr/share/bcc/tools/execsnoop
^C
Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses
some cleanups and leaves the aggregated kprobe in the hash table. Then,
__unregister_trace_kprobe() initialises tk->rp.kp.list and creates an
infinite loop like this.
aggregated kprobe.list -> kprobe.list -.
^ |
'.__.'
In this situation, these commands fall into the infinite loop and result
in RCU stall or soft lockup.
cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the
infinite loop with RCU.
/usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex,
and __get_valid_kprobe() is stuck in
the loop.
To avoid the issue, make sure we don't call disarm_kprobe() for disabled
kprobes.
[0]
Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2)
WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129)
Modules linked in: ena
CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28
Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129)
Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94
RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001
RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff
RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff
R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40
R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000
FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
__disable_kprobe (kernel/kprobes.c:1716)
disable_kprobe (kernel/kprobes.c:2392)
__disable_trace_kprobe (kernel/trace/trace_kprobe.c:340)
disable_trace_kprobe (kernel/trace/trace_kprobe.c:429)
perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168)
perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295)
_free_event (kernel/events/core.c:4971)
perf_event_release_kernel (kernel/events/core.c:5176)
perf_release (kernel/events/core.c:5186)
__fput (fs/file_table.c:321)
task_work_run (./include/linux/sched.h:2056 (discriminator 1) kernel/task_work.c:179 (discriminator 1))
exit_to_user_mode_prepare (./include/linux/resume_user_mode.h:49 kernel/entry/common.c:169 kernel/entry/common.c:201)
syscall_exit_to_user_mode (./arch/x86/include/asm/jump_label.h:55 ./arch/x86/include/asm/nospec-branch.h:384 ./arch/x86/include/asm/entry-common.h:94 kernel/entry/common.c:133 kernel/entry/common.c:296)
do_syscall_64 (arch/x86/entry/common.c:87)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7fe7ff210654
Code: 15 79 89 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 00 8b 05 9a cd 20 00 48 63 ff 85 c0 75 11 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a f3 c3 48 83 ec 18 48 89 7c 24 08 e8 34 fc
RSP: 002b:00007ffdbd1d3538 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007fe7ff210654
RDX: 0000000000000000 RSI: 0000000000002401 RDI: 0000000000000008
RBP: 0000000000000000 R08: 94ae31d6fda838a4 R0900007fe8001c9d30
R10: 00007ffdbd1d34b0 R11: 0000000000000246 R12: 00007ffdbd1d3600
R13: 0000000000000000 R14: fffffffffffffffc R15: 00007ffdbd1d3560
</TASK>
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 69d54b9 ("kprobes: makes kprobes/enabled works correctly for optimized kprobes.")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Reported-by: Ayushman Dutta <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Wang Nan <[email protected]>
Cc: Kuniyuki Iwashima <[email protected]>
Cc: Kuniyuki Iwashima <[email protected]>
Cc: Ayushman Dutta <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Oct 22, 2022
Syzkaller produced the below call trace: BUG: KASAN: null-ptr-deref in io_msg_ring+0x3cb/0x9f0 Write of size 8 at addr 0000000000000070 by task repro/16399 CPU: 0 PID: 16399 Comm: repro Not tainted 6.1.0-rc1 #28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_msg_ring+0x3cb/0x9f0 kasan_report+0xbc/0xf0 ? io_msg_ring+0x3cb/0x9f0 kasan_check_range+0x140/0x190 io_msg_ring+0x3cb/0x9f0 ? io_msg_ring_prep+0x300/0x300 io_issue_sqe+0x698/0xca0 io_submit_sqes+0x92f/0x1c30 __do_sys_io_uring_enter+0xae4/0x24b0 .... RIP: 0033:0x7f2eaf8f8289 RSP: 002b:00007fff40939718 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2eaf8f8289 RDX: 0000000000000000 RSI: 0000000000006f71 RDI: 0000000000000004 RBP: 00007fff409397a0 R08: 0000000000000000 R09: 0000000000000039 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004006d0 R13: 00007fff40939880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... We don't have a NULL check on file_ptr in io_msg_send_fd() function, so when file_ptr is NUL src_file is also NULL and get_file() dereferences a NULL pointer and leads to above crash. Add a NULL check to fix this issue. Fixes: e6130eb ("io_uring: add support for passing fixed file descriptors") Reported-by: syzkaller <[email protected]> Signed-off-by: Harshit Mogalapalli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Dec 21, 2022
This adds a sanity check for the i_op pointer of the inode which is returned after reading Root directory MFT record. We should check the i_op is valid before trying to create the root dentry, otherwise we may encounter a NPD while mounting a image with a funny Root directory MFT record. [ 114.484325] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 114.484811] #PF: supervisor read access in kernel mode [ 114.485084] #PF: error_code(0x0000) - not-present page [ 114.485606] PGD 0 P4D 0 [ 114.485975] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 114.486570] CPU: 0 PID: 237 Comm: mount Tainted: G B 6.0.0-rc4 #28 [ 114.486977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 114.488169] RIP: 0010:d_flags_for_inode+0xe0/0x110 [ 114.488816] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241 [ 114.490326] RSP: 0018:ffff8880065e7aa8 EFLAGS: 00000296 [ 114.490695] RAX: 0000000000000001 RBX: ffff888008ccd750 RCX: ffffffff84af2aea [ 114.490986] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff87abd020 [ 114.491364] RBP: ffff8880065e7ac8 R08: 0000000000000001 R09: fffffbfff0f57a05 [ 114.491675] R10: ffffffff87abd027 R11: fffffbfff0f57a04 R12: 0000000000000000 [ 114.491954] R13: 0000000000000008 R14: 0000000000000000 R15: ffff888008ccd750 [ 114.492397] FS: 00007fdc8a627e40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 114.492797] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.493150] CR2: 0000000000000008 CR3: 00000000013ba000 CR4: 00000000000006f0 [ 114.493671] Call Trace: [ 114.493890] <TASK> [ 114.494075] __d_instantiate+0x24/0x1c0 [ 114.494505] d_instantiate.part.0+0x35/0x50 [ 114.494754] d_make_root+0x53/0x80 [ 114.494998] ntfs_fill_super+0x1232/0x1b50 [ 114.495260] ? put_ntfs+0x1d0/0x1d0 [ 114.495499] ? vsprintf+0x20/0x20 [ 114.495723] ? set_blocksize+0x95/0x150 [ 114.495964] get_tree_bdev+0x232/0x370 [ 114.496272] ? put_ntfs+0x1d0/0x1d0 [ 114.496502] ntfs_fs_get_tree+0x15/0x20 [ 114.496859] vfs_get_tree+0x4c/0x130 [ 114.497099] path_mount+0x654/0xfe0 [ 114.497507] ? putname+0x80/0xa0 [ 114.497933] ? finish_automount+0x2e0/0x2e0 [ 114.498362] ? putname+0x80/0xa0 [ 114.498571] ? kmem_cache_free+0x1c4/0x440 [ 114.498819] ? putname+0x80/0xa0 [ 114.499069] do_mount+0xd6/0xf0 [ 114.499343] ? path_mount+0xfe0/0xfe0 [ 114.499683] ? __kasan_check_write+0x14/0x20 [ 114.500133] __x64_sys_mount+0xca/0x110 [ 114.500592] do_syscall_64+0x3b/0x90 [ 114.500930] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 114.501294] RIP: 0033:0x7fdc898e948a [ 114.501542] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 114.502716] RSP: 002b:00007ffd793e58f8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 114.503175] RAX: ffffffffffffffda RBX: 0000564b2228f060 RCX: 00007fdc898e948a [ 114.503588] RDX: 0000564b2228f260 RSI: 0000564b2228f2e0 RDI: 0000564b22297ce0 [ 114.504925] RBP: 0000000000000000 R08: 0000564b2228f280 R09: 0000000000000020 [ 114.505484] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564b22297ce0 [ 114.505823] R13: 0000564b2228f260 R14: 0000000000000000 R15: 00000000ffffffff [ 114.506562] </TASK> [ 114.506887] Modules linked in: [ 114.507648] CR2: 0000000000000008 [ 114.508884] ---[ end trace 0000000000000000 ]--- [ 114.509675] RIP: 0010:d_flags_for_inode+0xe0/0x110 [ 114.510140] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241 [ 114.511762] RSP: 0018:ffff8880065e7aa8 EFLAGS: 00000296 [ 114.512401] RAX: 0000000000000001 RBX: ffff888008ccd750 RCX: ffffffff84af2aea [ 114.513103] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff87abd020 [ 114.513512] RBP: ffff8880065e7ac8 R08: 0000000000000001 R09: fffffbfff0f57a05 [ 114.513831] R10: ffffffff87abd027 R11: fffffbfff0f57a04 R12: 0000000000000000 [ 114.514757] R13: 0000000000000008 R14: 0000000000000000 R15: ffff888008ccd750 [ 114.515411] FS: 00007fdc8a627e40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 114.515794] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.516208] CR2: 0000000000000008 CR3: 00000000013ba000 CR4: 00000000000006f0 Signed-off-by: Edward Lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Dec 21, 2022
Although the attribute name length is checked before comparing it to some common names (e.g., $I30), the offset isn't. This adds a sanity check for the attribute name offset, guarantee the validity and prevent possible out-of-bound memory accesses. [ 191.720056] BUG: unable to handle page fault for address: ffffebde00000008 [ 191.721060] #PF: supervisor read access in kernel mode [ 191.721586] #PF: error_code(0x0000) - not-present page [ 191.722079] PGD 0 P4D 0 [ 191.722571] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 191.723179] CPU: 0 PID: 244 Comm: mount Not tainted 6.0.0-rc4 #28 [ 191.723749] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 191.724832] RIP: 0010:kfree+0x56/0x3b0 [ 191.725870] Code: 80 48 01 d8 0f 82 65 03 00 00 48 c7 c2 00 00 00 80 48 2b 15 2c 06 dd 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 0a 069 [ 191.727375] RSP: 0018:ffff8880076f7878 EFLAGS: 00000286 [ 191.727897] RAX: ffffebde00000000 RBX: 0000000000000040 RCX: ffffffff8528d5b9 [ 191.728531] RDX: 0000777f80000000 RSI: ffffffff8522d49c RDI: 0000000000000040 [ 191.729183] RBP: ffff8880076f78a0 R08: 0000000000000000 R09: 0000000000000000 [ 191.729628] R10: ffff888008949fd8 R11: ffffed10011293fd R12: 0000000000000040 [ 191.730158] R13: ffff888008949f98 R14: ffff888008949ec0 R15: ffff888008949fb0 [ 191.730645] FS: 00007f3520cd7e40(0000) GS:ffff88805ba00000(0000) knlGS:0000000000000000 [ 191.731328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.731667] CR2: ffffebde00000008 CR3: 0000000009704000 CR4: 00000000000006f0 [ 191.732568] Call Trace: [ 191.733231] <TASK> [ 191.733860] kvfree+0x2c/0x40 [ 191.734632] ni_clear+0x180/0x290 [ 191.735085] ntfs_evict_inode+0x45/0x70 [ 191.735495] evict+0x199/0x280 [ 191.735996] iput.part.0+0x286/0x320 [ 191.736438] iput+0x32/0x50 [ 191.736811] iget_failed+0x23/0x30 [ 191.737270] ntfs_iget5+0x337/0x1890 [ 191.737629] ? ntfs_clear_mft_tail+0x20/0x260 [ 191.738201] ? ntfs_get_block_bmap+0x70/0x70 [ 191.738482] ? ntfs_objid_init+0xf6/0x140 [ 191.738779] ? ntfs_reparse_init+0x140/0x140 [ 191.739266] ntfs_fill_super+0x121b/0x1b50 [ 191.739623] ? put_ntfs+0x1d0/0x1d0 [ 191.739984] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 191.740466] ? put_ntfs+0x1d0/0x1d0 [ 191.740787] ? sb_set_blocksize+0x6a/0x80 [ 191.741272] get_tree_bdev+0x232/0x370 [ 191.741829] ? put_ntfs+0x1d0/0x1d0 [ 191.742669] ntfs_fs_get_tree+0x15/0x20 [ 191.743132] vfs_get_tree+0x4c/0x130 [ 191.743457] path_mount+0x654/0xfe0 [ 191.743938] ? putname+0x80/0xa0 [ 191.744271] ? finish_automount+0x2e0/0x2e0 [ 191.744582] ? putname+0x80/0xa0 [ 191.745053] ? kmem_cache_free+0x1c4/0x440 [ 191.745403] ? putname+0x80/0xa0 [ 191.745616] do_mount+0xd6/0xf0 [ 191.745887] ? path_mount+0xfe0/0xfe0 [ 191.746287] ? __kasan_check_write+0x14/0x20 [ 191.746582] __x64_sys_mount+0xca/0x110 [ 191.746850] do_syscall_64+0x3b/0x90 [ 191.747122] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 191.747517] RIP: 0033:0x7f351fee948a [ 191.748332] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 191.749341] RSP: 002b:00007ffd51cf3af8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 191.749960] RAX: ffffffffffffffda RBX: 000055b903733060 RCX: 00007f351fee948a [ 191.750589] RDX: 000055b903733260 RSI: 000055b9037332e0 RDI: 000055b90373bce0 [ 191.751115] RBP: 0000000000000000 R08: 000055b903733280 R09: 0000000000000020 [ 191.751537] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 000055b90373bce0 [ 191.751946] R13: 000055b903733260 R14: 0000000000000000 R15: 00000000ffffffff [ 191.752519] </TASK> [ 191.752782] Modules linked in: [ 191.753785] CR2: ffffebde00000008 [ 191.754937] ---[ end trace 0000000000000000 ]--- [ 191.755429] RIP: 0010:kfree+0x56/0x3b0 [ 191.755725] Code: 80 48 01 d8 0f 82 65 03 00 00 48 c7 c2 00 00 00 80 48 2b 15 2c 06 dd 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 0a 069 [ 191.756744] RSP: 0018:ffff8880076f7878 EFLAGS: 00000286 [ 191.757218] RAX: ffffebde00000000 RBX: 0000000000000040 RCX: ffffffff8528d5b9 [ 191.757580] RDX: 0000777f80000000 RSI: ffffffff8522d49c RDI: 0000000000000040 [ 191.758016] RBP: ffff8880076f78a0 R08: 0000000000000000 R09: 0000000000000000 [ 191.758570] R10: ffff888008949fd8 R11: ffffed10011293fd R12: 0000000000000040 [ 191.758957] R13: ffff888008949f98 R14: ffff888008949ec0 R15: ffff888008949fb0 [ 191.759317] FS: 00007f3520cd7e40(0000) GS:ffff88805ba00000(0000) knlGS:0000000000000000 [ 191.759711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.760118] CR2: ffffebde00000008 CR3: 0000000009704000 CR4: 00000000000006f0 Signed-off-by: Edward Lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Jan 20, 2023
The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194 Fixes: 7e7bbdd ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Apr 14, 2023
For quite some time we were chasing a bug which looked like a sudden permanent failure of networking and mmc on some of our devices. The bug was very sensitive to any software changes and even more to any kernel debug options. Finally we got a setup where the problem was reproducible with CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma: [ 16.992082] ------------[ cut here ]------------ [ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes] [ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900 [ 17.018977] Modules linked in: xxxxx [ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28 [ 17.045345] Hardware name: xxxxx [ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO) [ 17.054322] pc : check_unmap+0x6a0/0x900 [ 17.058243] lr : check_unmap+0x6a0/0x900 [ 17.062163] sp : ffffffc010003c40 [ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c [ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800 [ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8 [ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750 [ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000 [ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010 [ 17.097343] x17: 0000000000000000 x16: 0000000000000000 [ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720 [ 17.107959] x13: 0720072007200720 x12: 0720072007200720 [ 17.113261] x11: 0720072007200720 x10: 0720072007200720 [ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d [ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098 [ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370 [ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000 [ 17.145082] Call trace: [ 17.147524] check_unmap+0x6a0/0x900 [ 17.151091] debug_dma_unmap_page+0x88/0x90 [ 17.155266] gem_rx+0x114/0x2f0 [ 17.158396] macb_poll+0x58/0x100 [ 17.161705] net_rx_action+0x118/0x400 [ 17.165445] __do_softirq+0x138/0x36c [ 17.169100] irq_exit+0x98/0xc0 [ 17.172234] __handle_domain_irq+0x64/0xc0 [ 17.176320] gic_handle_irq+0x5c/0xc0 [ 17.179974] el1_irq+0xb8/0x140 [ 17.183109] xiic_process+0x5c/0xe30 [ 17.186677] irq_thread_fn+0x28/0x90 [ 17.190244] irq_thread+0x208/0x2a0 [ 17.193724] kthread+0x130/0x140 [ 17.196945] ret_from_fork+0x10/0x20 [ 17.200510] ---[ end trace 7240980785f81d6f ]--- [ 237.021490] ------------[ cut here ]------------ [ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b [ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240 [ 237.041802] Modules linked in: xxxxx [ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28 [ 237.068941] Hardware name: xxxxx [ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 237.077900] pc : add_dma_entry+0x214/0x240 [ 237.081986] lr : add_dma_entry+0x214/0x240 [ 237.086072] sp : ffffffc010003c30 [ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00 [ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0 [ 237.099987] x25: 0000000000000002 x24: 0000000000000000 [ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00 [ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600 [ 237.115897] x19: 00000000ffffffef x18: 0000000000000010 [ 237.121201] x17: 0000000000000000 x16: 0000000000000000 [ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720 [ 237.131807] x13: 0720072007200720 x12: 0720072007200720 [ 237.137111] x11: 0720072007200720 x10: 0720072007200720 [ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259 [ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000 [ 237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001 [ 237.158325] x3 : 0000000000000006 x2 : 0000000000000007 [ 237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000 [ 237.168932] Call trace: [ 237.171373] add_dma_entry+0x214/0x240 [ 237.175115] debug_dma_map_page+0xf8/0x120 [ 237.179203] gem_rx_refill+0x190/0x280 [ 237.182942] gem_rx+0x224/0x2f0 [ 237.186075] macb_poll+0x58/0x100 [ 237.189384] net_rx_action+0x118/0x400 [ 237.193125] __do_softirq+0x138/0x36c [ 237.196780] irq_exit+0x98/0xc0 [ 237.199914] __handle_domain_irq+0x64/0xc0 [ 237.204000] gic_handle_irq+0x5c/0xc0 [ 237.207654] el1_irq+0xb8/0x140 [ 237.210789] arch_cpu_idle+0x40/0x200 [ 237.214444] default_idle_call+0x18/0x30 [ 237.218359] do_idle+0x200/0x280 [ 237.221578] cpu_startup_entry+0x20/0x30 [ 237.225493] rest_init+0xe4/0xf0 [ 237.228713] arch_call_rest_init+0xc/0x14 [ 237.232714] start_kernel+0x47c/0x4a8 [ 237.236367] ---[ end trace 7240980785f81d70 ]--- Lars was fast to find an explanation: according to the datasheet bit 2 of the rx buffer descriptor entry has a different meaning in the extended mode: Address [2] of beginning of buffer, or in extended buffer descriptor mode (DMA configuration register [28] = 1), indicates a valid timestamp in the buffer descriptor entry. The macb driver didn't mask this bit while getting an address and it eventually caused a memory corruption and a dma failure. The problem is resolved by explicitly clearing the problematic bit if hw timestamping is used. Fixes: 7b42961 ("net: macb: Add support for PTP timestamps in DMA descriptors") Signed-off-by: Roman Gushchin <[email protected]> Co-developed-by: Lars-Peter Clausen <[email protected]> Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]. Want to support this open source service? Please star it : )