Merge pull request #1 from torvalds/master #463

jianguocn · 2017-09-19T05:45:47Z

update

Change I2C frequency Cherry-picked from commit `e656726a`. Related work items: torvalds#463

Bug 463: I2C Bus Frequency should be under 100KHz Change-Id: I127c1fb3ad1534a05c0523150cf90e3a07b073cd Signed-off-by: Jason Luo <[email protected]> Related work items: torvalds#463

Patch 11ac3f1da5fd ("btrfs: log, when replace, is canceled by the user") added a new btrfs_info call with a couple of btrfs_dev_name() args. This is wrong since the latter require being called in rcu read side critical section. Fix it by instead calling btrfs_info_in_rcu. This fixes the following splat: ============================= WARNING: suspicious RCU usage 4.16.0-rc2-nbor torvalds#463 Not tainted ----------------------------- fs/btrfs/dev-replace.c:318 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by btrfs/5698: #0: (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}, at: [<00000000942cb4ee>] btrfs_dev_replace_cancel+0xac/0x3f0 stack backtrace: CPU: 2 PID: 5698 Comm: btrfs Not tainted 4.16.0-rc2-nbor torvalds#463 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x85/0xc9 lockdep_rcu_suspicious+0x123/0x170 btrfs_dev_name.part.1+0x6d/0x80 btrfs_dev_replace_cancel+0x330/0x3f0 btrfs_ioctl+0x2751/0x65b0 ? debug_check_no_locks_freed+0x290/0x290 ? trace_hardirqs_on_caller+0x400/0x570 ? trace_hardirqs_on+0xd/0x10 ? btrfs_ioctl_get_supported_features+0x30/0x30 ? __handle_mm_fault+0x1aca/0x3230 ? lock_downgrade+0x650/0x650 ? trace_hardirqs_on+0xd/0x10 ? mem_cgroup_commit_charge+0xc0/0xdd0 ? _raw_spin_unlock+0x27/0x40 ? __handle_mm_fault+0x1aca/0x3230 ? lock_downgrade+0x650/0x650 ? vm_insert_page+0x650/0x650 ? __vma_link_rb+0x125/0x1d0 do_vfs_ioctl+0x184/0xf00 ? do_vfs_ioctl+0x184/0xf00 ? lock_downgrade+0x650/0x650 ? ioctl_preallocate+0x1a0/0x1a0 ? up_read+0x1f/0x40 ? __do_page_fault+0x5c6/0xb30 ? SyS_brk+0x412/0x5f0 ? mm_fault_error+0x2e0/0x2e0 SyS_ioctl+0x41/0x70 ? do_vfs_ioctl+0xf00/0xf00 do_syscall_64+0x19d/0x5d0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 11ac3f1da5fd ("btrfs: log, when replace, is canceled by the user") Signed-off-by: Nikolay Borisov <[email protected]>

Fix checkpatch warnings: WARNING: line over 80 characters torvalds#9: FILE: drivers/tty/serial/apbuart.c:9: + * Copyright (C) 2006 Daniel Hellstrom <[email protected]>, Aeroflex Gaisler AB WARNING: line over 80 characters torvalds#11: FILE: drivers/tty/serial/apbuart.c:11: + * Copyright (C) 2009 Kristoffer Glembo <[email protected]>, Aeroflex Gaisler AB WARNING: line over 80 characters torvalds#16: FILE: drivers/tty/serial/apbuart.c:16: +#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) WARNING: labels should not be indented torvalds#122: FILE: drivers/tty/serial/apbuart.c:122: + ignore_char: WARNING: Missing a blank line after declarations torvalds#186: FILE: drivers/tty/serial/apbuart.c:186: + unsigned int status = UART_GET_STATUS(port); + return status & UART_STATUS_THE ? TIOCSER_TEMT : 0; WARNING: Missing a blank line after declarations torvalds#322: FILE: drivers/tty/serial/apbuart.c:322: + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART) WARNING: Missing a blank line after declarations torvalds#427: FILE: drivers/tty/serial/apbuart.c:427: + unsigned int status; + do { WARNING: Missing a blank line after declarations torvalds#463: FILE: drivers/tty/serial/apbuart.c:463: + unsigned int quot, status; + status = UART_GET_STATUS(port); WARNING: line over 80 characters torvalds#627: FILE: drivers/tty/serial/apbuart.c:627: + port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map)); WARNING: line over 80 characters torvalds#634: FILE: drivers/tty/serial/apbuart.c:634: + port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line); Signed-off-by: Enrico Weigelt <[email protected]>

Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1" on the command line hits a warning during kernel entry, due to the way we manipulate the PMR. Early in the entry sequence, we call lockdep_hardirqs_off() to inform lockdep that interrupts have been masked (as the HW sets DAIF wqhen entering an exception). Architecturally PMR_EL1 is not affected by exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in the exception entry sequence, so early in exception entry the PMR can indicate that interrupts are unmasked even though they are masked by DAIF. If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the exception entry paths, and hence lockdep_hardirqs_off() will WARN() that something is amiss. We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during exception entry so that kernel code sees a consistent environment. We must also update local_daif_inherit() to undo this, as currently only touches DAIF. For other paths, local_daif_restore() will update both DAIF and the PMR. With this done, we can remove the existing special cases which set this later in the entry code. We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with local_daif_save(), as this will warn if it ever encounters (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This matches the gic_prio_kentry_setup that we have to retain for ret_to_user. The original splat from Zenghui's report was: | DEBUG_LOCKS_WARN_ON(!irqs_disabled()) | WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8 | Modules linked in: | CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ torvalds#463 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--) | pc : lockdep_hardirqs_off+0xd4/0xe8 | lr : lockdep_hardirqs_off+0xd4/0xe8 | sp : ffff80002a39bad0 | pmr_save: 000000e0 | x29: ffff80002a39bad0 x28: ffff0000de214bc0 | x27: ffff0000de1c0400 x26: 000000000049b328 | x25: 0000000000406f30 x24: ffff0000de1c00a0 | x23: 0000000020400005 x22: ffff8000105f747c | x21: 0000000096000044 x20: 0000000000498ef9 | x19: ffff80002a39bc88 x18: ffffffffffffffff | x17: 0000000000000000 x16: ffff800011c61eb0 | x15: ffff800011700a88 x14: 0720072007200720 | x13: 0720072007200720 x12: 0720072007200720 | x11: 0720072007200720 x10: 0720072007200720 | x9 : ffff80002a39bad0 x8 : ffff80002a39bad0 | x7 : ffff8000119f0800 x6 : c0000000ffff7fff | x5 : ffff8000119f07a8 x4 : 0000000000000001 | x3 : 9bcdab23f2432800 x2 : ffff800011730538 | x1 : 9bcdab23f2432800 x0 : 0000000000000000 | Call trace: | lockdep_hardirqs_off+0xd4/0xe8 | enter_from_kernel_mode.isra.5+0x7c/0xa8 | el1_abort+0x24/0x100 | el1_sync_handler+0x80/0xd0 | el1_sync+0x6c/0x100 | __arch_clear_user+0xc/0x90 | load_elf_binary+0x9fc/0x1450 | bprm_execve+0x404/0x880 | kernel_execve+0x180/0x188 | call_usermodehelper_exec_async+0xdc/0x158 | ret_from_fork+0x10/0x18 Fixes: 2352904 ("arm64: entry: fix non-NMI user<->kernel transitions") Fixes: 7cd1ea1 ("arm64: entry: fix non-NMI kernel<->kernel transitions") Fixes: f0cd5ac ("arm64: entry: fix NMI {user, kernel}->kernel transitions") Fixes: 2a9b3e6 ("arm64: entry: fix EL1 debug transitions") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Rutland <[email protected]> Reported-by: Zenghui Yu <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Will Deacon <[email protected]> Acked-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>

[ Upstream commit 4d6a38d ] Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1" on the command line hits a warning during kernel entry, due to the way we manipulate the PMR. Early in the entry sequence, we call lockdep_hardirqs_off() to inform lockdep that interrupts have been masked (as the HW sets DAIF wqhen entering an exception). Architecturally PMR_EL1 is not affected by exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in the exception entry sequence, so early in exception entry the PMR can indicate that interrupts are unmasked even though they are masked by DAIF. If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the exception entry paths, and hence lockdep_hardirqs_off() will WARN() that something is amiss. We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during exception entry so that kernel code sees a consistent environment. We must also update local_daif_inherit() to undo this, as currently only touches DAIF. For other paths, local_daif_restore() will update both DAIF and the PMR. With this done, we can remove the existing special cases which set this later in the entry code. We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with local_daif_save(), as this will warn if it ever encounters (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This matches the gic_prio_kentry_setup that we have to retain for ret_to_user. The original splat from Zenghui's report was: | DEBUG_LOCKS_WARN_ON(!irqs_disabled()) | WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8 | Modules linked in: | CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ Freescale#463 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--) | pc : lockdep_hardirqs_off+0xd4/0xe8 | lr : lockdep_hardirqs_off+0xd4/0xe8 | sp : ffff80002a39bad0 | pmr_save: 000000e0 | x29: ffff80002a39bad0 x28: ffff0000de214bc0 | x27: ffff0000de1c0400 x26: 000000000049b328 | x25: 0000000000406f30 x24: ffff0000de1c00a0 | x23: 0000000020400005 x22: ffff8000105f747c | x21: 0000000096000044 x20: 0000000000498ef9 | x19: ffff80002a39bc88 x18: ffffffffffffffff | x17: 0000000000000000 x16: ffff800011c61eb0 | x15: ffff800011700a88 x14: 0720072007200720 | x13: 0720072007200720 x12: 0720072007200720 | x11: 0720072007200720 x10: 0720072007200720 | x9 : ffff80002a39bad0 x8 : ffff80002a39bad0 | x7 : ffff8000119f0800 x6 : c0000000ffff7fff | x5 : ffff8000119f07a8 x4 : 0000000000000001 | x3 : 9bcdab23f2432800 x2 : ffff800011730538 | x1 : 9bcdab23f2432800 x0 : 0000000000000000 | Call trace: | lockdep_hardirqs_off+0xd4/0xe8 | enter_from_kernel_mode.isra.5+0x7c/0xa8 | el1_abort+0x24/0x100 | el1_sync_handler+0x80/0xd0 | el1_sync+0x6c/0x100 | __arch_clear_user+0xc/0x90 | load_elf_binary+0x9fc/0x1450 | bprm_execve+0x404/0x880 | kernel_execve+0x180/0x188 | call_usermodehelper_exec_async+0xdc/0x158 | ret_from_fork+0x10/0x18 Fixes: 2352904 ("arm64: entry: fix non-NMI user<->kernel transitions") Fixes: 7cd1ea1 ("arm64: entry: fix non-NMI kernel<->kernel transitions") Fixes: f0cd5ac ("arm64: entry: fix NMI {user, kernel}->kernel transitions") Fixes: 2a9b3e6 ("arm64: entry: fix EL1 debug transitions") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Rutland <[email protected]> Reported-by: Zenghui Yu <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Will Deacon <[email protected]> Acked-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4d6a38d ] Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1" on the command line hits a warning during kernel entry, due to the way we manipulate the PMR. Early in the entry sequence, we call lockdep_hardirqs_off() to inform lockdep that interrupts have been masked (as the HW sets DAIF wqhen entering an exception). Architecturally PMR_EL1 is not affected by exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in the exception entry sequence, so early in exception entry the PMR can indicate that interrupts are unmasked even though they are masked by DAIF. If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the exception entry paths, and hence lockdep_hardirqs_off() will WARN() that something is amiss. We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during exception entry so that kernel code sees a consistent environment. We must also update local_daif_inherit() to undo this, as currently only touches DAIF. For other paths, local_daif_restore() will update both DAIF and the PMR. With this done, we can remove the existing special cases which set this later in the entry code. We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with local_daif_save(), as this will warn if it ever encounters (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This matches the gic_prio_kentry_setup that we have to retain for ret_to_user. The original splat from Zenghui's report was: | DEBUG_LOCKS_WARN_ON(!irqs_disabled()) | WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8 | Modules linked in: | CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ torvalds#463 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--) | pc : lockdep_hardirqs_off+0xd4/0xe8 | lr : lockdep_hardirqs_off+0xd4/0xe8 | sp : ffff80002a39bad0 | pmr_save: 000000e0 | x29: ffff80002a39bad0 x28: ffff0000de214bc0 | x27: ffff0000de1c0400 x26: 000000000049b328 | x25: 0000000000406f30 x24: ffff0000de1c00a0 | x23: 0000000020400005 x22: ffff8000105f747c | x21: 0000000096000044 x20: 0000000000498ef9 | x19: ffff80002a39bc88 x18: ffffffffffffffff | x17: 0000000000000000 x16: ffff800011c61eb0 | x15: ffff800011700a88 x14: 0720072007200720 | x13: 0720072007200720 x12: 0720072007200720 | x11: 0720072007200720 x10: 0720072007200720 | x9 : ffff80002a39bad0 x8 : ffff80002a39bad0 | x7 : ffff8000119f0800 x6 : c0000000ffff7fff | x5 : ffff8000119f07a8 x4 : 0000000000000001 | x3 : 9bcdab23f2432800 x2 : ffff800011730538 | x1 : 9bcdab23f2432800 x0 : 0000000000000000 | Call trace: | lockdep_hardirqs_off+0xd4/0xe8 | enter_from_kernel_mode.isra.5+0x7c/0xa8 | el1_abort+0x24/0x100 | el1_sync_handler+0x80/0xd0 | el1_sync+0x6c/0x100 | __arch_clear_user+0xc/0x90 | load_elf_binary+0x9fc/0x1450 | bprm_execve+0x404/0x880 | kernel_execve+0x180/0x188 | call_usermodehelper_exec_async+0xdc/0x158 | ret_from_fork+0x10/0x18 Fixes: 2352904 ("arm64: entry: fix non-NMI user<->kernel transitions") Fixes: 7cd1ea1 ("arm64: entry: fix non-NMI kernel<->kernel transitions") Fixes: f0cd5ac ("arm64: entry: fix NMI {user, kernel}->kernel transitions") Fixes: 2a9b3e6 ("arm64: entry: fix EL1 debug transitions") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Rutland <[email protected]> Reported-by: Zenghui Yu <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Will Deacon <[email protected]> Acked-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4d6a38d ] Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1" on the command line hits a warning during kernel entry, due to the way we manipulate the PMR. Early in the entry sequence, we call lockdep_hardirqs_off() to inform lockdep that interrupts have been masked (as the HW sets DAIF wqhen entering an exception). Architecturally PMR_EL1 is not affected by exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in the exception entry sequence, so early in exception entry the PMR can indicate that interrupts are unmasked even though they are masked by DAIF. If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the exception entry paths, and hence lockdep_hardirqs_off() will WARN() that something is amiss. We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during exception entry so that kernel code sees a consistent environment. We must also update local_daif_inherit() to undo this, as currently only touches DAIF. For other paths, local_daif_restore() will update both DAIF and the PMR. With this done, we can remove the existing special cases which set this later in the entry code. We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with local_daif_save(), as this will warn if it ever encounters (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This matches the gic_prio_kentry_setup that we have to retain for ret_to_user. The original splat from Zenghui's report was: | DEBUG_LOCKS_WARN_ON(!irqs_disabled()) | WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8 | Modules linked in: | CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ torvalds#463 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--) | pc : lockdep_hardirqs_off+0xd4/0xe8 | lr : lockdep_hardirqs_off+0xd4/0xe8 | sp : ffff80002a39bad0 | pmr_save: 000000e0 | x29: ffff80002a39bad0 x28: ffff0000de214bc0 | x27: ffff0000de1c0400 x26: 000000000049b328 | x25: 0000000000406f30 x24: ffff0000de1c00a0 | x23: 0000000020400005 x22: ffff8000105f747c | x21: 0000000096000044 x20: 0000000000498ef9 | x19: ffff80002a39bc88 x18: ffffffffffffffff | x17: 0000000000000000 x16: ffff800011c61eb0 | x15: ffff800011700a88 x14: 0720072007200720 | x13: 0720072007200720 x12: 0720072007200720 | x11: 0720072007200720 x10: 0720072007200720 | x9 : ffff80002a39bad0 x8 : ffff80002a39bad0 | x7 : ffff8000119f0800 x6 : c0000000ffff7fff | x5 : ffff8000119f07a8 x4 : 0000000000000001 | x3 : 9bcdab23f2432800 x2 : ffff800011730538 | x1 : 9bcdab23f2432800 x0 : 0000000000000000 | Call trace: | lockdep_hardirqs_off+0xd4/0xe8 | enter_from_kernel_mode.isra.5+0x7c/0xa8 | el1_abort+0x24/0x100 | el1_sync_handler+0x80/0xd0 | el1_sync+0x6c/0x100 | __arch_clear_user+0xc/0x90 | load_elf_binary+0x9fc/0x1450 | bprm_execve+0x404/0x880 | kernel_execve+0x180/0x188 | call_usermodehelper_exec_async+0xdc/0x158 | ret_from_fork+0x10/0x18 Fixes: 2352904 ("arm64: entry: fix non-NMI user<->kernel transitions") Fixes: 7cd1ea1 ("arm64: entry: fix non-NMI kernel<->kernel transitions") Fixes: f0cd5ac ("arm64: entry: fix NMI {user, kernel}->kernel transitions") Fixes: 2a9b3e6 ("arm64: entry: fix EL1 debug transitions") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Rutland <[email protected]> Reported-by: Zenghui Yu <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Will Deacon <[email protected]> Acked-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Bruce Ashfield <[email protected]>

rust: move to stable `rustc` release (`1.54.0`)

…nslate the same key and the ones that depend on other translations The hid-apple driver does not support chaining translations or dependencies on other translations. This creates two problems: 1 - In Non-English keyboards of Macs, KEY_102ND and KEY_GRAVE are swapped and the APPLE_ISO_TILDE_QUIRK is used to work around this problem. The quirk is not set for the Macs where these bugs happen yet (see the 2nd patch for that), but this can be forced by setting the iso_layout parameter. Unfortunately, this only partially works. KEY_102ND gets translated to KEY_GRAVE, but KEY_GRAVE does not get translated to KEY_102ND, so both of them end up functioning as KEY_GRAVE. This is because the driver translates the keys as if Fn was pressed and the original is sent if it is not pressed, without any further translations happening on the key[torvalds#463]. KEY_GRAVE is present at macbookpro_no_esc_fn_keys[torvalds#195], so this is what happens: - KEY_GRAVE -> KEY_ESC (as if Fn is pressed) - KEY_GRAVE is returned (Fn isn't pressed, so translation is discarded) - KEY_GRAVE -> KEY_102ND (this part is not reached!) ... 2 - In case the touchbar does not work, the driver supports sending Escape when Fn+KEY_GRAVE is pressed. As mentioned previously, KEY_102ND is actually KEY_GRAVE and needs to be translated before this happens. Normally, these are the steps that should happen: - KEY_102ND -> KEY_GRAVE - KEY_GRAVE -> KEY_ESC (Fn is pressed) - KEY_ESC is returned Though this is what happens instead, as dependencies on other translations are not supported: - KEY_102ND -> KEY_ESC (Fn is pressed) - KEY_ESC is returned This patch fixes both bugs by ordering the translations correctly and by making the translations continue and not return immediately after translating a key so that chained translations work and translations can depend on other ones. This patch also simplifies the implementation of the swap_fn_leftctrl option a little bit, as it makes it simply use a normal translation instead adding extra code to translate a key to KEY_FN[torvalds#381]. This change wasn't put in another patch as the code that translates the Fn key needs to be changed because of the changes in the patch, and those changes would be discarded with the next patch anyway (the part that originally translates KEY_FN to KEY_LEFTCTRL needs to be made an else-if branch of the part that transltes KEY_LEFTCTRL to KEY_FN). Note: Line numbers (#XYZ) are for drivers/hid/hid-apple.c at commit 20afcc4 ("HID: apple: Add "GANSS" to the non-Apple list"). Note: These bugs are only present on Macs with a keyboard with no dedicated escape key and a non-English layout. Signed-off-by: Kerem Karabay <[email protected]>

…nslate the same key [ Upstream commit 5476fcf ] The hid-apple driver does not support chaining translations or dependencies on other translations. This creates two problems: 1 - In Non-English keyboards of Macs, KEY_102ND and KEY_GRAVE are swapped and the APPLE_ISO_TILDE_QUIRK is used to work around this problem. The quirk is not set for the Macs where these bugs happen yet (see the 2nd patch for that), but this can be forced by setting the iso_layout parameter. Unfortunately, this only partially works. KEY_102ND gets translated to KEY_GRAVE, but KEY_GRAVE does not get translated to KEY_102ND, so both of them end up functioning as KEY_GRAVE. This is because the driver translates the keys as if Fn was pressed and the original is sent if it is not pressed, without any further translations happening on the key[torvalds#463]. KEY_GRAVE is present at macbookpro_no_esc_fn_keys[torvalds#195], so this is what happens: - KEY_GRAVE -> KEY_ESC (as if Fn is pressed) - KEY_GRAVE is returned (Fn isn't pressed, so translation is discarded) - KEY_GRAVE -> KEY_102ND (this part is not reached!) ... 2 - In case the touchbar does not work, the driver supports sending Escape when Fn+KEY_GRAVE is pressed. As mentioned previously, KEY_102ND is actually KEY_GRAVE and needs to be translated before this happens. Normally, these are the steps that should happen: - KEY_102ND -> KEY_GRAVE - KEY_GRAVE -> KEY_ESC (Fn is pressed) - KEY_ESC is returned Though this is what happens instead, as dependencies on other translations are not supported: - KEY_102ND -> KEY_ESC (Fn is pressed) - KEY_ESC is returned This patch fixes both bugs by ordering the translations correctly and by making the translations continue and not return immediately after translating a key so that chained translations work and translations can depend on other ones. This patch also simplifies the implementation of the swap_fn_leftctrl option a little bit, as it makes it simply use a normal translation instead adding extra code to translate a key to KEY_FN[torvalds#381]. This change wasn't put in another patch as the code that translates the Fn key needs to be changed because of the changes in the patch, and those changes would be discarded with the next patch anyway (the part that originally translates KEY_FN to KEY_LEFTCTRL needs to be made an else-if branch of the part that transltes KEY_LEFTCTRL to KEY_FN). Note: Line numbers (#XYZ) are for drivers/hid/hid-apple.c at commit 20afcc4 ("HID: apple: Add "GANSS" to the non-Apple list"). Note: These bugs are only present on Macs with a keyboard with no dedicated escape key and a non-English layout. Signed-off-by: Kerem Karabay <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Merge pull request #1 from torvalds/master

71caf63

update

jianguocn closed this Sep 19, 2017

foxconn-bmc-ks pushed a commit to foxconn-bmc-ks/linux that referenced this pull request Oct 27, 2017

Merged PR 714: Change I2C frequency

377dd57

Change I2C frequency Cherry-picked from commit `e656726a`. Related work items: torvalds#463

ojeda added a commit to ojeda/linux that referenced this pull request Jul 29, 2021

Merge pull request torvalds#463 from ojeda/rustc

3d2d62a

rust: move to stable `rustc` release (`1.54.0`)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merge pull request #1 from torvalds/master #463

Merge pull request #1 from torvalds/master #463

jianguocn commented Sep 19, 2017

Merge pull request #1 from torvalds/master #463

Merge pull request #1 from torvalds/master #463

Conversation

jianguocn commented Sep 19, 2017