Update 5.4-2.1.x-imx up to v5.4.150 #463
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 9c0f0a0 upstream. ocfs2_data_convert_worker() is currently dropping any cached acl info for FILE before down-converting meta lock. It should also drop for DIRECTORY. Otherwise the second acl lookup returns the cached one (from VFS layer) which could be already stale. The problem we are seeing is that the acl changes on one node doesn't get refreshed on other nodes in the following case: Node 1 Node 2 -------------- ---------------- getfacl dir1 getfacl dir1 <-- this is OK setfacl -m u:user1:rwX dir1 getfacl dir1 <-- see the change for user1 getfacl dir1 <-- can't see change for user1 Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Wengang Wang <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 17956b5 upstream. This loop is supposed to loop until if reads something other than CS_IDST or until it times out after 30,000 attempts. But because of the || vs && bug, it will never time out and instead it will loop a minimum of 30,000 times. This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE so it probably doesn't affect regular usage. Fixes: 96fe53e ("usb: gadget: r8a66597-udc: add support for TEST_MODE") Cc: stable <[email protected]> Reviewed-by: Yoshihiro Shimoda <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20210906094221.GA10957@kili Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 91bb163 upstream. According USB spec each ISOC transaction should be performed in a designated for that transaction interval. On bus errors or delays in operating system scheduling of client software can result in no packet being transferred for a (micro)frame. An error indication should be returned as status to the client software in such a case. Current implementation in case of missed/dropped interval send same data in next possible interval instead of reporting missed isoc. This fix complete requests with -ENODATA if interval elapsed. HSOTG core in BDMA and Slave modes haven't HW support for (micro)frames tracking, this is why SW should care about tracking of (micro)frames. Because of that method and consider operating system scheduling delays, added few additional checking's of elapsed target (micro)frame: 1. Immediately before enabling EP to start transfer. 2. With any transfer completion interrupt. 3. With incomplete isoc in/out interrupt. 4. With EP disabled interrupt because of incomplete transfer. 5. With OUT token received while EP disabled interrupt (for OUT transfers). 6. With NAK replied to IN token interrupt (for IN transfers). As part of ISOC flow, additionally fixed 'current' and 'target' frame calculation functions. In HS mode SOF limits provided by DSTS register is 0x3fff, but in non HS mode this limit is 0x7ff. Tested by internal tool which also using for dwc3 testing. Signed-off-by: Minas Harutyunyan <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit dbe2518 upstream. When last descriptor in a descriptor list completed with XferComplete interrupt, core switching to handle next descriptor and assert BNA interrupt. Both these interrupts are set while dwc2_hsotg_epint() handler called. Each interrupt should be handled separately: first XferComplete interrupt then BNA interrupt, otherwise last completed transfer will not be giveback to function driver as completed request. Fixes: 729cac6 ("usb: dwc2: Change ISOC DDMA flow") Cc: stable <[email protected]> Signed-off-by: Minas Harutyunyan <[email protected]> Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 517c7bf upstream. This is writing to the first 1 - 3 bytes of "val" and then writing all four bytes to musb_writel(). The last byte is always going to be garbage. Zero out the last bytes instead. Fixes: 550a737 ("USB: Add MUSB and TUSB support") Signed-off-by: Dan Carpenter <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/20210916135737.GI25094@kili Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9ed38fd upstream. Although very unlikely that the tlink pointer would be null in this case, get_next_mid function can in theory return null (but not an error) so need to check for null (not for IS_ERR, which can not be returned here). Address warning: fs/smbfs_client/connect.c:2392 cifs_match_super() warn: 'tlink' isn't an ERR_PTR Pointed out by Dan Carpenter via smatch code analysis tool CC: [email protected] Reported-by: Dan Carpenter <[email protected]> Acked-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 0594c58 upstream. The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4ca ("xen: SMP guest support") Cc: [email protected] Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b55d37e upstream. ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has broken tag handling, preventing the device from working at all: usb 1-1: new full-speed USB device number 2 using uhci_hcd usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60 usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0 usb 1-1: Product: USB Device usb 1-1: Manufacturer: USB Device usb-storage 1-1:1.0: USB Mass Storage device detected scsi host2: usb-storage 1-1:1.0 usbcore: registered new interface driver usb-storage usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address. 2.6c is the only firmware that claims Linux compatibility. The firmware can be upgraded using ezotgdbg utility: https://github.com/asciilifeform/ezotgdbg Acked-by: Alan Stern <[email protected]> Signed-off-by: Ondrej Zary <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3bd18ba upstream. Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 91fac07 upstream. If the driver runs out of minor numbers it would release minor 0 and allow another device to claim the minor while still in use. Fortunately, registering the tty class device of the second device would fail (with a stack dump) due to the sysfs name collision so no memory is leaked. Fixes: cae2bc7 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail") Cc: [email protected] # 4.19 Cc: Jaejoong Kim <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 5fdb55c upstream. During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object cleanup may close 1 or more fds. The close operations are completed using the task work mechanism -- which means the thread needs to return to userspace or the file object may never be dereferenced -- which can lead to hung processes. Force the binder thread back to userspace if an fd is closed during BC_FREE_BUFFER handling. Fixes: 80cd795 ("binder: fix use-after-free due to ksys_close() during fdget()") Cc: stable <[email protected]> Reviewed-by: Martijn Coenen <[email protected]> Acked-by: Christian Brauner <[email protected]> Signed-off-by: Todd Kjos <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 92dc0b1 upstream. User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect. Fixes: a18e151 ("greybus: more uart work") Cc: [email protected] # 4.9 Reviewed-by: Alex Elder <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ce1c42b upstream. Further testing has revealed that LaCie Rugged USB3-FW does work with uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled. Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: stable <[email protected]> Suggested-by: Hans de Goede <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: Julian Sikorski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 58877b0 upstream. It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. CC: [email protected] # 5.4+ Suggested-by: Mathias Nyman <[email protected]> Tested-by: Chris Chiu <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 211f323 upstream. 0xac24 device ID is already defined and used via BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list. Fixes: 27f1281 ("USB: serial: Extra device/vendor ID for mos7840 driver") Signed-off-by: Krzysztof Kozlowski <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7bb0571 upstream. This patch adds the following Telit LN920 compositions: 0x1060: tty, adb, rmnet, tty, tty, tty, tty 0x1061: tty, adb, mbim, tty, tty, tty, tty 0x1062: rndis, tty, adb, tty, tty, tty, tty 0x1063: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Carlo Lobrano <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Daniele Palmas <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1ca200a upstream. The device ZTE 0x0094 is already on the list. Signed-off-by: Krzysztof Kozlowski <[email protected]> Fixes: b9e44fe ("USB: option: cleanup zte 3g-dongle's pid in option.c") Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9e3eed5 upstream. Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 25a1433 upstream. There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest. Fixes: 5d9e2ab ("mcb: Implement bus->dev.release callback") Fixes: 18d2881 ("mcb: Correctly initialize the bus's device") Cc: [email protected] Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 93368aa upstream. Fix up a misuse that the filename pointer isn't always valid in the ring buffer, and we should copy the content instead. Link: https://lore.kernel.org/r/[email protected] Fixes: 13f06f4 ("staging: erofs: support tracepoint") Cc: [email protected] # 4.19+ Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Gao Xiang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 0619b79 upstream. It's not uncommon where __btrfs_dump_space_info() gets called under over-commit situations. In that case free space would underflow as total allocated space is not enough to handle all the over-committed space. Such underflow values can sometimes cause confusion for users enabled enospc_debug mount option, and takes some seconds for developers to convert the underflow value to signed result. Just output the free space as s64 to avoid such problem. Reported-by: Eli V <[email protected]> Link: https://lore.kernel.org/linux-btrfs/CAJtFHUSy4zgyhf-4d9T+KdJp9w=UgzC2A0V=VtmaeEpcGgm1-Q@mail.gmail.com/ CC: [email protected] # 5.4+ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b7a0a79 upstream. Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd(). This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). CC: [email protected] # 5.4+ Suggested-by: Mathias Nyman <[email protected]> Tested-by: Chris Chiu <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 74e1eb3 upstream. Driver's tx_empty callback should signal when the transmit shift register is empty. So when the last character has been sent. STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which happens when the last byte is loaded into transmit shift register. STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift register are empty. So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty() callback function. Fixes: 3053079 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable <[email protected]> Signed-off-by: Pali Rohár <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e8f69b1 upstream. If resource allocation and registration fail for a muxed tty device (e.g. if there are no more minor numbers) the driver should not try to deregister the never-registered (or already-deregistered) tty. Fix up the error handling to avoid dereferencing a NULL pointer when attempting to remove the character device. Fixes: 72dc1c0 ("HSO: add option hso driver") Cc: [email protected] # 2.6.27 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 63d49d8 ] The AFS filesystem is currently triggering the silly-rename cleanup from afs_d_revalidate() when it sees that a dentry has been changed by a third party[1]. It should not be doing this as the cleanup includes deleting the silly-rename target file on iput. Fix this by removing the places in the d_revalidate handling that validate anything other than the directory and the dirent. It probably should not be looking to validate the target inode of the dentry also. This includes removing the point in afs_d_revalidate() where the inode that a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED). We don't know it got deleted. It could have been renamed or it could have hard links remaining. This was reproduced by cloning a git repo onto an afs volume on one machine, switching to another machine and doing "git status", then switching back to the first and doing "git status". The second status would show weird output due to ".git/index" getting deleted by the above mentioned mechanism. A simpler way to do it is to do: machine 1: touch a machine 2: touch b; mv -f b a machine 1: stat a on an afs volume. The bug shows up as the stat failing with ENOENT and the file server log showing that machine 1 deleted "a". Fixes: 79ddbfa ("afs: Implement sillyrename for unlink and rename") Reported-by: Markus Suvanto <[email protected]> Signed-off-by: David Howells <[email protected]> Tested-by: Markus Suvanto <[email protected]> cc: [email protected] Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c4 [1] Link: https://lore.kernel.org/r/163111668100.283156.3851669884664475428.stgit@warthog.procyon.org.uk/ Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 349bff4 ] ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR() and unused acpi.h. Fixes: fdca4f1 ("platform:x86: add Intel P-Unit mailbox IPC driver") Reported-by: kernel test robot <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7237a49 ] irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. Fixes: d4fd040 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5bed8b0 ] The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 6c90731 ] Coverity stumbled over a missing error check in smc_clc_prfx_set(): *** CID 1475954: Error handling issues (CHECKED_RETURN) /net/smc/smc_clc.c: 233 in smc_clc_prfx_set() >>> CID 1475954: Error handling issues (CHECKED_RETURN) >>> Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times). 233 kernel_getsockname(clcsock, (struct sockaddr *)&addrs); Add the return code check in smc_clc_prfx_set(). Fixes: c246d94 ("net/smc: restructure netinfo for CLC proposal msgs") Reported-by: Julian Wiedmann <[email protected]> Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 2dd824c ] The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should be void. Fixes: dbe776c ("gpio: uniphier: add UniPhier GPIO controller driver") Signed-off-by: Kunihiko Hayashi <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 280bef5 ] In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. Fixes: 7d75bbb ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown") Signed-off-by: Kaige Fu <[email protected]> [maz: fixed commit message] Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7df835a ] Commit b014089 ("md: Fix race when creating a new md device.") not only moved assigning mddev->gendisk before calling add_disk, which fixes the races described in the commit log, but also added a mddev->open_mutex critical section over add_disk and creation of the md kobj. Adding a kobject after add_disk is racy vs deleting the gendisk right after adding it, but md already prevents against that by holding a mddev->active reference. On the other hand taking this lock added a lock order reversal with what is not disk->open_mutex (used to be bdev->bd_mutex when the commit was added) for partition devices, which need that lock for the internal open for the partition scan, and a recent commit also takes it for non-partitioned devices, leading to further lockdep splatter. Fixes: b014089 ("md: Fix race when creating a new md device.") Fixes: d626338 ("block: support delayed holder registration") Reported-by: [email protected] Signed-off-by: Christoph Hellwig <[email protected]> Tested-by: [email protected] Reviewed-by: NeilBrown <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5afedf6 ] There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [Freescale#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a896 ("blktrace: add ftrace plugin") Signed-off-by: Zhihao Cheng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d82d530 ] plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 Suggested-by: Nicolas Ferre <[email protected]> Signed-off-by: Tong Zhang <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 08dad2f ] The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC. The divisor used is set in the MAC_MDIO_Address register field CR (Clock Rate) The divisor is there to change the CSR clock into a clock that falls below the IEEE 802.3 specified max frequency of 2.5MHz. If the CSR clock is 300MHz, the code falls back to using the reset value in the MAC_MDIO_Address register, as described in the comment above this code. However, 300MHz is actually an allowed value and the proper divider can be estimated quite easily (it's just 1Hz difference!) A CSR frequency of 300MHz with the maximum clock rate value of 0x5 (STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around ~2.42MHz which is below the IEEE 802.3 specified maximum. For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz, and unfortunately, the reset-value of the MAC_MDIO_Address CR field is 0x0. This leads to a clock rate of zero and a divisor of 42, and gives an MDC frequency of ~7.14MHz. Allow CSR clock of 300MHz by making the comparison inclusive. Signed-off-by: Jesper Nilsson <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b1a8985 ] m68k builds fail widely with errors such as arch/m68k/include/asm/raw_io.h:20:19: error: cast to pointer from integer of different size arch/m68k/include/asm/raw_io.h:30:32: error: cast to pointer from integer of different size [-Werror=int-to-p On m68k, io functions are defined as macros. The problem is seen if the macro parameter variable size differs from the size of a pointer. Cast the parameter of all io macros to unsigned long before casting it to a pointer to fix the problem. Signed-off-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e87b505 ] only increase fib6_sernum in net namespace after add fib6_info successfully. Signed-off-by: zhang kai <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 0e6491b ] Commit 7661809 ("mm: don't allow oversized kvmalloc() calls") add the oversize check. When the allocation is larger than what kmalloc() supports, the following warning triggered: WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597 Modules linked in: CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597 Call Trace: kvmalloc include/linux/mm.h:806 [inline] kvmalloc_array include/linux/mm.h:824 [inline] kvcalloc include/linux/mm.h:829 [inline] check_btf_line kernel/bpf/verifier.c:9925 [inline] check_btf_info kernel/bpf/verifier.c:10049 [inline] bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759 bpf_prog_load kernel/bpf/syscall.c:2301 [inline] __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: [email protected] Signed-off-by: Bixuan Cui <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8480ed9 ] Today the Xen ballooning is done via delayed work in a workqueue. This might result in workqueue hangups being reported in case of large amounts of memory are being ballooned in one go (here 16GB): BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s! Showing busy workqueues and worker pools: workqueue events: flags=0x0 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3 in-flight: 229:balloon_process pending: cache_reap workqueue events_freezable_power_: flags=0x84 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: disk_events_workfn workqueue mm_percpu_wq: flags=0x8 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: vmstat_update pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43 This can easily be avoided by using a dedicated kernel thread for doing the ballooning work. Reported-by: Jan Beulich <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 79f528a ] nvme_update_ana_state() has a deficiency that results in a failure to properly update the ana state for a namespace in the following case: NSIDs in ctrl->namespaces: 1, 3, 4 NSIDs in desc->nsids: 1, 2, 3, 4 Loop iteration 0: ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH. Loop iteration 1: ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH. Loop iteration 2: ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH. Where the update to the ANA state of NSID 3 is missed. To fix this increment n and retry the update with the same ns when ns->head->ns_id is higher than nsid, Signed-off-by: Anton Eidelman <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 59583f7 ] Commit 53b7670 ("sparc: factor the dma coherent mapping into helper") lost the page align for the calls to dma_make_coherent and srmmu_unmapiorange. The latter cannot handle a non page aligned len argument. Signed-off-by: Andreas Larsson <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 858560b ] KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [693354.108278] page dumped because: kasan: bad access detected [693354.108511] Memory state around the buggy address: [693354.108671] ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [693354.116396] ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.132421] ^ [693354.140284] ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.147912] ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.155281] ================================================================== blkgs are protected by both queue and blkcg locks and holding either should stabilize them. However, the path of destroying blkg policy data is only protected by queue lock in blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks can get the blkg policy data before the blkg policy data is destroyed, and use it after destroyed, which will result in a use-after-free. CPU0 CPU1 blkcg_deactivate_policy spin_lock_irq(&q->queue_lock) bfq_io_set_weight_legacy spin_lock_irq(&blkcg->lock) blkg_to_bfqg(blkg) pd_to_bfqg(blkg->pd[pol->plid]) ^^^^^^blkg->pd[pol->plid] != NULL bfqg != NULL pol->pd_free_fn(blkg->pd[pol->plid]) pd_to_bfqg(blkg->pd[pol->plid]) bfqg_put(bfqg) kfree(bfqg) blkg->pd[pol->plid] = NULL spin_unlock_irq(q->queue_lock); bfq_group_set_weight(bfqg, val, 0) bfqg->entity.new_weight ^^^^^^trigger uaf here spin_unlock_irq(&blkcg->lock); Fix by grabbing the matching blkcg lock before trying to destroy blkg policy data. Suggested-by: Tejun Heo <[email protected]> Signed-off-by: Li Jinlin <[email protected]> Acked-by: Tejun Heo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f6b5f1a ] absolute_pointer() disassociates a pointer from its originating symbol type and context. Use it to prevent compiler warnings/errors such as drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Such warnings may be reported by gcc 11.x for string and memory operations on fixed addresses. Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dff2d13 ] gcc 11.x reports the following compiler warning/error. drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Use absolute_pointer() to work around the problem. Cc: Geert Uytterhoeven <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit fc7c028 ] The sparc mdesc code does pointer games with 'struct mdesc_hdr', but didn't describe to the compiler how that header is then followed by the data that the header describes. As a result, gcc is now unhappy since it does stricter pointer range tracking, and doesn't understand about how these things work. This results in various errors like: arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’: arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread] 647 | if (!strcmp(names + ep[ret].name_offset, name)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ which are easily avoided by just describing 'struct mdesc_hdr' better, and making the node_block() helper function look into that unsized data[] that follows the header. This makes the sparc64 build happy again at least for my cross-compiler version (gcc version 11.2.1). Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/ Cc: Guenter Roeck <[email protected]> Cc: David S. Miller <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b7213ff ] The qnx4 directory entries are 64-byte blocks that have different contents depending on the a status byte that is in the last byte of the block. In particular, a directory entry can be either a "link info" entry with a 48-byte name and pointers to the real inode information, or an "inode entry" with a smaller 16-byte name and the full inode information. But the code was written to always just treat the directory name as if it was part of that "inode entry", and just extend the name to the longer case if the status byte said it was a link entry. That work just fine and gives the right results, but now that gcc is tracking data structure accesses much more, the code can trigger a compiler error about using up to 48 bytes (the long name) in a structure that only has that shorter name in it: fs/qnx4/dir.c: In function ‘qnx4_readdir’: fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread] 51 | size = strnlen(de->di_fname, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from fs/qnx4/qnx4.h:3, from fs/qnx4/dir.c:16: include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here 45 | char di_fname[QNX4_SHORT_NAME_MAX]; | ^~~~~~~~ which is because the source code doesn't really make this whole "one of two different types" explicit. Fix this by introducing a very explicit union of the two types, and basically explaining to the compiler what is really going on. Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 90cc7be ] Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning: arch/parisc/kernel/setup.c: In function 'start_parisc': error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0 Signed-off-by: Helge Deller <[email protected]> Co-Developed-by: Guenter Roeck <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9fcb2e9 ] __stack_chk_guard is setup once while init stage and never changed after that. Although the modification of this variable at runtime will usually cause the kernel to crash (so does the attacker), it should be marked as __ro_after_init, and it should not affect performance if it is placed in the ro_after_init section. Signed-off-by: Dan Li <[email protected]> Acked-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…olatile [ Upstream commit 35a3f4e ] Some drivers pass a pointer to volatile data to virt_to_bus() and virt_to_phys(), and that works fine. One exception is alpha. This results in a number of compile errors such as drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset': drivers/net/wan/lmc/lmc_main.c:1782:50: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type drivers/atm/ambassador.c: In function 'do_loader_command': drivers/atm/ambassador.c:1747:58: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type Declare the parameter of virt_to_phys and virt_to_bus as pointer to volatile to fix the problem. Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3c0d2a4 ] tx timeout and slot time are currently specified in units of HZ. On Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this results in the following error message. drivers/net/hamradio/6pack.c: In function 'sixpack_open': drivers/net/hamradio/6pack.c:71:41: error: unsigned conversion from 'int' to 'unsigned char' changes value from '256' to '0' In the 6PACK protocol, tx timeout is specified in units of 10 ms and transmitted over the wire: https://www.linux-ax25.org/wiki/6PACK Defining a value dependent on HZ doesn't really make sense, and presumably comes from the (very historical) situation where HZ was originally 100. Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity: mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100); and the SIXP_TXDELAY walue is sent as a byte over the wire. Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit efafec2 ] Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being empty, and the only use of tegra_slink_runtime_{resume,suspend} goes away, resulting in drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function] 1200 | static int tegra_slink_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function] 1188 | static int tegra_slink_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ mark the functions __maybe_unused to make the build happy. This hits the alpha allmodconfig build (and others). Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 5297cfa upstream. dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri <[email protected]> Signed-off-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8b4bd25 upstream. After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due to overheat (when it should not). It turned out this was due to commit fe6a6de ("thermal/drivers/int340x/processor_thermal: Fix tcc setting"). What happens is this drivers uses a global variable to keep track of the tcc offset (tcc_offset_save) and uses it on resume. The issue is this variable is initialized to 0, but is only set in tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly set by userspace. If that does not happen, the resume path will set the offset to 0 (in my case the h/w default being 3, the offset would become too low after a suspend/resume cycle). The issue did not arise before commit fe6a6de, as the function setting the offset would return if the offset was 0. This is no longer the case (rightfully). Fix this by not applying the offset if it wasn't saved before, reverting back to the old logic. A better approach will come later, but this will be easier to apply to stable kernels. The logic to restore the offset after a resume was there long before commit fe6a6de, but as a value of 0 was considered invalid I'm referencing the commit that made the issue possible in the Fixes tag instead. Fixes: fe6a6de ("thermal/drivers/int340x/processor_thermal: Fix tcc setting") Cc: [email protected] Cc: Srinivas Pandruvada <[email protected]> Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Reviewed-by: Srinivas Pandruvada <[email protected]> Tested-by: Srinivas Pandruvada <srinivas.pI [email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 514ef1e upstream. Current PCIe MEM space of size 16 MB is not enough for some combination of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted Firmware for Armada 3700 platform already assigns 128 MB for PCIe window, so extend PCIe MEM space to the end of 128 MB PCIe window which allows to allocate more PCIe BARs for more PCIe cards. Without this change some combination of PCIe cards cannot be used and kernel show error messages in dmesg during initialization: pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref] pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000] pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000] pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000] pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000] pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit] pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit] Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot crashes during loading of kernel DTB file. This bug is present only in U-Boot code for Turris Mox and therefore other Armada 3700 devices are not affected by this bug. Bug is fixed in U-Boot version 2021.07. To not break booting new kernels on existing versions of U-Boot on Turris Mox, use first 16 MB range for IO and second range with rest of PCIe window for MEM. Signed-off-by: Pali Rohár <[email protected]> Fixes: 76f6386 ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Signed-off-by: Gregory CLEMENT <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 96f5bd0 upstream. Commit 8480ed9 ("xen/balloon: use a kernel thread instead a workqueue") switched the Xen balloon driver to use a kernel thread. Unfortunately the patch omitted to call try_to_freeze() or to use wait_event_freezable_timeout(), causing a system suspend to fail. Fixes: 8480ed9 ("xen/balloon: use a kernel thread instead a workqueue") Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit d5f6545 upstream. In commit b7213ff ("qnx4: avoid stringop-overread errors") I tried to teach gcc about how the directory entry structure can be two different things depending on a status flag. It made the code clearer, and it seemed to make gcc happy. However, Arnd points to a gcc bug, where despite using two different members of a union, gcc then gets confused, and uses the size of one of the members to decide if a string overrun happens. And not necessarily the rigth one. End result: with some configurations, gcc-11 will still complain about the source buffer size being overread: fs/qnx4/dir.c: In function 'qnx4_readdir': fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread] 76 | size = strnlen(name, size); | ^~~~~~~~~~~~~~~~~~~ fs/qnx4/dir.c:26:22: note: source object declared here 26 | char de_name; | ^~~~~~~ because gcc will get confused about which union member entry is actually getting accessed, even when the source code is very clear about it. Gcc internally will have combined two "redundant" pointers (pointing to different union elements that are at the same offset), and takes the size checking from one or the other - not necessarily the right one. This is clearly a gcc bug, but we can work around it fairly easily. The biggest thing here is the big honking comment about why we do what we do. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 Reported-and-tested-by: Arnd Bergmann <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: Florian Fainelli <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Tested-by: Hulk Robot <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
This is the 5.4.150 stable release Signed-off-by: Andrey Zhizhikin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jan 9, 2023
…nslate the same key [ Upstream commit 5476fcf ] The hid-apple driver does not support chaining translations or dependencies on other translations. This creates two problems: 1 - In Non-English keyboards of Macs, KEY_102ND and KEY_GRAVE are swapped and the APPLE_ISO_TILDE_QUIRK is used to work around this problem. The quirk is not set for the Macs where these bugs happen yet (see the 2nd patch for that), but this can be forced by setting the iso_layout parameter. Unfortunately, this only partially works. KEY_102ND gets translated to KEY_GRAVE, but KEY_GRAVE does not get translated to KEY_102ND, so both of them end up functioning as KEY_GRAVE. This is because the driver translates the keys as if Fn was pressed and the original is sent if it is not pressed, without any further translations happening on the key[Freescale#463]. KEY_GRAVE is present at macbookpro_no_esc_fn_keys[Freescale#195], so this is what happens: - KEY_GRAVE -> KEY_ESC (as if Fn is pressed) - KEY_GRAVE is returned (Fn isn't pressed, so translation is discarded) - KEY_GRAVE -> KEY_102ND (this part is not reached!) ... 2 - In case the touchbar does not work, the driver supports sending Escape when Fn+KEY_GRAVE is pressed. As mentioned previously, KEY_102ND is actually KEY_GRAVE and needs to be translated before this happens. Normally, these are the steps that should happen: - KEY_102ND -> KEY_GRAVE - KEY_GRAVE -> KEY_ESC (Fn is pressed) - KEY_ESC is returned Though this is what happens instead, as dependencies on other translations are not supported: - KEY_102ND -> KEY_ESC (Fn is pressed) - KEY_ESC is returned This patch fixes both bugs by ordering the translations correctly and by making the translations continue and not return immediately after translating a key so that chained translations work and translations can depend on other ones. This patch also simplifies the implementation of the swap_fn_leftctrl option a little bit, as it makes it simply use a normal translation instead adding extra code to translate a key to KEY_FN[Freescale#381]. This change wasn't put in another patch as the code that translates the Fn key needs to be changed because of the changes in the patch, and those changes would be discarded with the next patch anyway (the part that originally translates KEY_FN to KEY_LEFTCTRL needs to be made an else-if branch of the part that transltes KEY_LEFTCTRL to KEY_FN). Note: Line numbers (#XYZ) are for drivers/hid/hid-apple.c at commit 20afcc4 ("HID: apple: Add "GANSS" to the non-Apple list"). Note: These bugs are only present on Macs with a keyboard with no dedicated escape key and a non-English layout. Signed-off-by: Kerem Karabay <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Kernel has been built for both aarch64 (
imx_v8_defconfig) and arm32 (imx_v7_defconfig).-- andrey