Remove trailing slash from kernel.org link #28

mikegagnon · 2013-03-01T20:12:20Z

A trailing slash on a URL connotes a link to a directory; an absence of a trailing slash connotes a link to a page.

should fix the following issue [ 3229.815012] [ BUG: lock held when returning to user space! ] [ 3229.815016] 3.5.0-rc7-wl torvalds#28 Tainted: G W O [ 3229.815017] ------------------------------------------------ [ 3229.815019] wpa_supplicant/5783 is leaving the kernel with locks still held! [ 3229.815022] 1 lock held by wpa_supplicant/5783: [ 3229.815023] #0: (reg_mutex){+.+.+.}, at: [<fa65834d>] reg_last_request_cell_base+0x1d/0x60 [cfg80211] Cc: Luis Rodriguez <[email protected]> Signed-off-by: Mohammed Shafi Shajakhan <[email protected]> Tested-by: Luciano Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>

commit 62d2feb upstream. Fix crash after issuing: echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device [ 37.180999] device: '2-001e': device_add [ 37.188293] bus: 'i2c': add device 2-001e [ 37.194549] PM: Adding info for i2c:2-001e [ 37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843 [ 37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e [ 37.224884] HMC5843 initialized [ 37.228759] ------------[ cut here ]------------ [ 37.233612] kernel BUG at mm/slab.c:505! [ 37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT [ 37.243103] Modules linked in: [ 37.246337] CPU: 0 Not tainted (3.3.1-gta04+ torvalds#28) [ 37.251647] PC is at kfree+0x84/0x144 [ 37.255493] LR is at kfree+0x20/0x144 [ 37.259338] pc : [<c00b408c>] lr : [<c00b4028>] psr: 40000093 [ 37.259368] sp : de249cd8 ip : 0000000c fp : 00000090 [ 37.271362] r10: 0000000a r9 : de229eac r8 : c0236274 [ 37.276855] r7 : c09d6490 r6 : a0000013 r5 : de229c00 r4 : de229c10 [ 37.283691] r3 : c0f00218 r2 : 00000400 r1 : c0eea000 r0 : c00b4028 [ 37.290527] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 37.298095] Control: 10c5387d Table: 9e1d0019 DAC: 00000015 [ 37.304107] Process sh (pid: 91, stack limit = 0xde2482f0) [ 37.309844] Stack: (0xde249cd8 to 0xde24a000) [ 37.314422] 9cc0: de229c10 de229c00 [ 37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80 [ 37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005 [ 37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10 [ 37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594 [ 37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020 [ 37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48 [ 37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00 [ 37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40 [ 37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48 [ 37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20 [ 37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28 [ 37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8 [ 37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58 [ 37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000 [ 37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000 [ 37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0 [ 37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354 [ 37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8 [ 37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8 [ 37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004 [ 37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000 [ 37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000 [ 37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000 [ 37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c) [ 37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990) [ 37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114) [ 37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) [ 37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218) [ 37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) [ 37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4) [ 37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c) [ 37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c) [ 37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c) [ 37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) [ 37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24) [ 37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140) [ 37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178) [ 37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68) [ 37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c) [ 37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2) [ 37.700775] ---[ end trace aaf805debdb69390 ]--- Client data was assigned to iio_dev structure in probe but in hmc5843_init_client function casted to private driver data structure which is wrong. Possibly calling mutex_init(&data->lock); corrupt data which the lead to above crash. Signed-off-by: Marek Belisko <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

With git commit c705c78 "acpi: Export the acpi_processor_get_performance_info" we are now using a different mechanism to access the P-states. The acpi_processor per-cpu structure is set and filtered by the core ACPI code which shrinks the per_cpu contents to only online CPUs. In the past we would call acpi_processor_register_performance() which would have not tried to dereference offline cpus. With the new patch and the fact that the loop we take is for for_all_possible_cpus we end up crashing on some machines. We could modify the loop to be for online_cpus - but all the other loops in the code use possible_cpus (for a good reason) - so lets leave it as so and just check if per_cpu(processor) is NULL. With this patch we will bypass the !online but possible CPUs. This fixes: IP: [<ffffffffa00d13b5>] xen_acpi_processor_init+0x1b6/0xe01 [xen_acpi_processor] PGD 4126e6067 PUD 4126e3067 PMD 0 Oops: 0002 [#1] SMP Pid: 432, comm: modprobe Not tainted 3.9.0-rc3+ #28 To be filled by O.E.M. To be filled by O.E.M./M5A97 RIP: e030:[<ffffffffa00d13b5>] [<ffffffffa00d13b5>] xen_acpi_processor_init+0x1b6/0xe01 [xen_acpi_processor] RSP: e02b:ffff88040c8a3ce8 EFLAGS: 00010282 .. snip.. Call Trace: [<ffffffffa00d11ff>] ? read_acpi_id+0x12b/0x12b [xen_acpi_processor] [<ffffffff8100215a>] do_one_initcall+0x12a/0x180 [<ffffffff810c42c3>] load_module+0x1cd3/0x2870 [<ffffffff81319b70>] ? ddebug_proc_open+0xc0/0xc0 [<ffffffff810c4f37>] sys_init_module+0xd7/0x120 [<ffffffff8166ce19>] system_call_fastpath+0x16/0x1b on some machines. Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>

commit 62d2feb upstream. Fix crash after issuing: echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device [ 37.180999] device: '2-001e': device_add [ 37.188293] bus: 'i2c': add device 2-001e [ 37.194549] PM: Adding info for i2c:2-001e [ 37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843 [ 37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e [ 37.224884] HMC5843 initialized [ 37.228759] ------------[ cut here ]------------ [ 37.233612] kernel BUG at mm/slab.c:505! [ 37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT [ 37.243103] Modules linked in: [ 37.246337] CPU: 0 Not tainted (3.3.1-gta04+ torvalds#28) [ 37.251647] PC is at kfree+0x84/0x144 [ 37.255493] LR is at kfree+0x20/0x144 [ 37.259338] pc : [<c00b408c>] lr : [<c00b4028>] psr: 40000093 [ 37.259368] sp : de249cd8 ip : 0000000c fp : 00000090 [ 37.271362] r10: 0000000a r9 : de229eac r8 : c0236274 [ 37.276855] r7 : c09d6490 r6 : a0000013 r5 : de229c00 r4 : de229c10 [ 37.283691] r3 : c0f00218 r2 : 00000400 r1 : c0eea000 r0 : c00b4028 [ 37.290527] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 37.298095] Control: 10c5387d Table: 9e1d0019 DAC: 00000015 [ 37.304107] Process sh (pid: 91, stack limit = 0xde2482f0) [ 37.309844] Stack: (0xde249cd8 to 0xde24a000) [ 37.314422] 9cc0: de229c10 de229c00 [ 37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80 [ 37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005 [ 37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10 [ 37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594 [ 37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020 [ 37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48 [ 37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00 [ 37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40 [ 37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48 [ 37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20 [ 37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28 [ 37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8 [ 37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58 [ 37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000 [ 37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000 [ 37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0 [ 37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354 [ 37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8 [ 37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8 [ 37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004 [ 37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000 [ 37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000 [ 37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000 [ 37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c) [ 37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990) [ 37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114) [ 37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) [ 37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218) [ 37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) [ 37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4) [ 37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c) [ 37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c) [ 37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c) [ 37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) [ 37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24) [ 37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140) [ 37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178) [ 37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68) [ 37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c) [ 37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2) [ 37.700775] ---[ end trace aaf805debdb69390 ]--- Client data was assigned to iio_dev structure in probe but in hmc5843_init_client function casted to private driver data structure which is wrong. Possibly calling mutex_init(&data->lock); corrupt data which the lead to above crash. Signed-off-by: Marek Belisko <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Fix crash after issuing: echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device [ 37.180999] device: '2-001e': device_add [ 37.188293] bus: 'i2c': add device 2-001e [ 37.194549] PM: Adding info for i2c:2-001e [ 37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843 [ 37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e [ 37.224884] HMC5843 initialized [ 37.228759] ------------[ cut here ]------------ [ 37.233612] kernel BUG at mm/slab.c:505! [ 37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT [ 37.243103] Modules linked in: [ 37.246337] CPU: 0 Not tainted (3.3.1-gta04+ torvalds#28) [ 37.251647] PC is at kfree+0x84/0x144 [ 37.255493] LR is at kfree+0x20/0x144 [ 37.259338] pc : [<c00b408c>] lr : [<c00b4028>] psr: 40000093 [ 37.259368] sp : de249cd8 ip : 0000000c fp : 00000090 [ 37.271362] r10: 0000000a r9 : de229eac r8 : c0236274 [ 37.276855] r7 : c09d6490 r6 : a0000013 r5 : de229c00 r4 : de229c10 [ 37.283691] r3 : c0f00218 r2 : 00000400 r1 : c0eea000 r0 : c00b4028 [ 37.290527] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 37.298095] Control: 10c5387d Table: 9e1d0019 DAC: 00000015 [ 37.304107] Process sh (pid: 91, stack limit = 0xde2482f0) [ 37.309844] Stack: (0xde249cd8 to 0xde24a000) [ 37.314422] 9cc0: de229c10 de229c00 [ 37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80 [ 37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005 [ 37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10 [ 37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594 [ 37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020 [ 37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48 [ 37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00 [ 37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40 [ 37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48 [ 37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20 [ 37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28 [ 37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8 [ 37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58 [ 37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000 [ 37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000 [ 37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0 [ 37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354 [ 37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8 [ 37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8 [ 37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004 [ 37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000 [ 37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000 [ 37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000 [ 37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c) [ 37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990) [ 37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114) [ 37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) [ 37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218) [ 37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) [ 37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4) [ 37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c) [ 37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c) [ 37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c) [ 37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) [ 37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24) [ 37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140) [ 37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178) [ 37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68) [ 37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c) [ 37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2) [ 37.700775] ---[ end trace aaf805debdb69390 ]--- Client data was assigned to iio_dev structure in probe but in hmc5843_init_client function casted to private driver data structure which is wrong. Possibly calling mutex_init(&data->lock); corrupt data which the lead to above crash. Signed-off-by: Marek Belisko <[email protected]> Cc: stable <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The driver calls cxgb_vlan_mode() from init_one(). This calls into synchronize_rx(), which locks all the q locks, but the q locks are not initialized until cxgb_up() -> setup_sge_qsets(). So move the call to cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets(). We also move the body of these functions up higher to avoid having to a forward declaration. This was found because of the lockdep warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 torvalds#28 Call Trace: [<ffffffff8106e767>] register_lock_class+0x108/0x2d0 [<ffffffff8106ff42>] __lock_acquire+0xd3/0xd06 [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe [<ffffffff813862a6>] _raw_spin_lock_irq+0x36/0x45 [<ffffffffa01e71aa>] cxgb_vlan_mode+0x96/0xcb [cxgb3] [<ffffffffa01f90eb>] init_one+0x8c4/0x980 [cxgb3] [<ffffffff811fcbf0>] local_pci_probe+0x3f/0x70 [<ffffffff81042206>] do_work_for_cpu+0x10/0x22 [<ffffffff810482de>] kthread+0xa1/0xa9 [<ffffffff8138e234>] kernel_thread_helper+0x4/0x10 Contrary to what lockdep says, the code is not fine: we are locking an uninitialized spinlock. Signed-off-by: Roland Dreier <[email protected]> Signed-off-by: David S. Miller <[email protected]>

commit 62d2feb upstream. Fix crash after issuing: echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device [ 37.180999] device: '2-001e': device_add [ 37.188293] bus: 'i2c': add device 2-001e [ 37.194549] PM: Adding info for i2c:2-001e [ 37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843 [ 37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e [ 37.224884] HMC5843 initialized [ 37.228759] ------------[ cut here ]------------ [ 37.233612] kernel BUG at mm/slab.c:505! [ 37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT [ 37.243103] Modules linked in: [ 37.246337] CPU: 0 Not tainted (3.3.1-gta04+ torvalds#28) [ 37.251647] PC is at kfree+0x84/0x144 [ 37.255493] LR is at kfree+0x20/0x144 [ 37.259338] pc : [<c00b408c>] lr : [<c00b4028>] psr: 40000093 [ 37.259368] sp : de249cd8 ip : 0000000c fp : 00000090 [ 37.271362] r10: 0000000a r9 : de229eac r8 : c0236274 [ 37.276855] r7 : c09d6490 r6 : a0000013 r5 : de229c00 r4 : de229c10 [ 37.283691] r3 : c0f00218 r2 : 00000400 r1 : c0eea000 r0 : c00b4028 [ 37.290527] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 37.298095] Control: 10c5387d Table: 9e1d0019 DAC: 00000015 [ 37.304107] Process sh (pid: 91, stack limit = 0xde2482f0) [ 37.309844] Stack: (0xde249cd8 to 0xde24a000) [ 37.314422] 9cc0: de229c10 de229c00 [ 37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80 [ 37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005 [ 37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10 [ 37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594 [ 37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020 [ 37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48 [ 37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00 [ 37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40 [ 37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48 [ 37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20 [ 37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28 [ 37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8 [ 37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58 [ 37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000 [ 37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000 [ 37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0 [ 37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354 [ 37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8 [ 37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8 [ 37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004 [ 37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000 [ 37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000 [ 37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000 [ 37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c) [ 37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990) [ 37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114) [ 37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) [ 37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218) [ 37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) [ 37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4) [ 37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c) [ 37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c) [ 37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c) [ 37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) [ 37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24) [ 37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140) [ 37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178) [ 37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68) [ 37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c) [ 37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2) [ 37.700775] ---[ end trace aaf805debdb69390 ]--- Client data was assigned to iio_dev structure in probe but in hmc5843_init_client function casted to private driver data structure which is wrong. Possibly calling mutex_init(&data->lock); corrupt data which the lead to above crash. Signed-off-by: Marek Belisko <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Oleksii reported that he had seen an oops similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4 CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G W O 3.10.1SIGN torvalds#28 Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013 Workqueue: cifsiod cifs_echo_request [cifs] task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000 RIP: 0010:[<ffffffff814dcc13>] [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP: 0000:ffff880148745b00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048 RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78 RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00 R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0 Oops#2 Part7 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8 Call Trace: [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs] [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs] [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs] [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs] Oops#2 Part6 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs] [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs] [<ffffffff810b45b3>] process_one_work+0x173/0x4a0 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0 [<ffffffff810bae00>] kthread+0xc0/0xd0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41 RIP [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP <ffff880148745b00> CR2: 0000000000000088 The client was in the middle of trying to send a frame when the server->ssocket pointer got zeroed out. In most places, that we access that pointer, the srv_mutex is held. There's only one spot that I see that the server->ssocket pointer gets set and the srv_mutex isn't held. This patch corrects that. The upstream bug report was here: https://bugzilla.kernel.org/show_bug.cgi?id=60557 Cc: <[email protected]> Reported-by: Oleksii Shevchuk <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>

commit 73e216a upstream. Oleksii reported that he had seen an oops similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4 CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G W O 3.10.1SIGN #28 Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013 Workqueue: cifsiod cifs_echo_request [cifs] task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000 RIP: 0010:[<ffffffff814dcc13>] [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP: 0000:ffff880148745b00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048 RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78 RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00 R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0 Oops#2 Part7 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8 Call Trace: [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs] [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs] [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs] [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs] Oops#2 Part6 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs] [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs] [<ffffffff810b45b3>] process_one_work+0x173/0x4a0 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0 [<ffffffff810bae00>] kthread+0xc0/0xd0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41 RIP [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP <ffff880148745b00> CR2: 0000000000000088 The client was in the middle of trying to send a frame when the server->ssocket pointer got zeroed out. In most places, that we access that pointer, the srv_mutex is held. There's only one spot that I see that the server->ssocket pointer gets set and the srv_mutex isn't held. This patch corrects that. The upstream bug report was here: https://bugzilla.kernel.org/show_bug.cgi?id=60557 Reported-by: Oleksii Shevchuk <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 73e216a upstream. Oleksii reported that he had seen an oops similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4 CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G W O 3.10.1SIGN #28 Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013 Workqueue: cifsiod cifs_echo_request [cifs] task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000 RIP: 0010:[<ffffffff814dcc13>] [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP: 0000:ffff880148745b00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048 RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78 RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00 R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0 Oops#2 Part7 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8 Call Trace: [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs] [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs] [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs] [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs] Oops#2 Part6 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs] [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs] [<ffffffff810b45b3>] process_one_work+0x173/0x4a0 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0 [<ffffffff810bae00>] kthread+0xc0/0xd0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41 RIP [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP <ffff880148745b00> CR2: 0000000000000088 The client was in the middle of trying to send a frame when the server->ssocket pointer got zeroed out. In most places, that we access that pointer, the srv_mutex is held. There's only one spot that I see that the server->ssocket pointer gets set and the srv_mutex isn't held. This patch corrects that. The upstream bug report was here: https://bugzilla.kernel.org/show_bug.cgi?id=60557 Reported-by: Oleksii Shevchuk <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]>

commit 73e216a upstream. Oleksii reported that he had seen an oops similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4 CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G W O 3.10.1SIGN torvalds#28 Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013 Workqueue: cifsiod cifs_echo_request [cifs] task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000 RIP: 0010:[<ffffffff814dcc13>] [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP: 0000:ffff880148745b00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048 RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78 RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00 R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0 Oops#2 Part7 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8 Call Trace: [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs] [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs] [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs] [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs] Oops#2 Part6 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs] [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs] [<ffffffff810b45b3>] process_one_work+0x173/0x4a0 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0 [<ffffffff810bae00>] kthread+0xc0/0xd0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41 RIP [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP <ffff880148745b00> CR2: 0000000000000088 The client was in the middle of trying to send a frame when the server->ssocket pointer got zeroed out. In most places, that we access that pointer, the srv_mutex is held. There's only one spot that I see that the server->ssocket pointer gets set and the srv_mutex isn't held. This patch corrects that. The upstream bug report was here: https://bugzilla.kernel.org/show_bug.cgi?id=60557 Reported-by: Oleksii Shevchuk <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.644008] smpboot: Booting Node 1, Processors: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 OK [ 1.245006] smpboot: Booting Node 2, Processors: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 OK [ 1.864005] smpboot: Booting Node 3, Processors: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 OK [ 2.489005] smpboot: Booting Node 4, Processors: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 OK [ 3.093005] smpboot: Booting Node 5, Processors: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 OK [ 3.698005] smpboot: Booting Node 6, Processors: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 OK [ 4.304005] smpboot: Booting Node 7, Processors: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <[email protected]> Cc: Libin <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>

Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 [ 0.603005] .... node #1, CPUs: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 [ 1.200005] .... node #2, CPUs: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.796005] .... node #3, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 [ 2.393005] .... node #4, CPUs: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 [ 2.996005] .... node #5, CPUs: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 3.600005] .... node torvalds#6, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 [ 4.202005] .... node torvalds#7, CPUs: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 [ 4.811005] .... node torvalds#8, CPUs: torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 5.421006] .... node torvalds#9, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 [ 6.032005] .... node torvalds#10, CPUs: torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 [ 6.648006] .... node torvalds#11, CPUs: torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 7.262005] .... node torvalds#12, CPUs: torvalds#96 torvalds#97 torvalds#98 torvalds#99 torvalds#100 torvalds#101 torvalds#102 torvalds#103 [ 7.865005] .... node torvalds#13, CPUs: torvalds#104 torvalds#105 torvalds#106 torvalds#107 torvalds#108 torvalds#109 torvalds#110 torvalds#111 [ 8.466005] .... node torvalds#14, CPUs: torvalds#112 torvalds#113 torvalds#114 torvalds#115 torvalds#116 torvalds#117 torvalds#118 torvalds#119 [ 9.073006] .... node torvalds#15, CPUs: torvalds#120 torvalds#121 torvalds#122 torvalds#123 torvalds#124 torvalds#125 torvalds#126 torvalds#127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>

The 'driver' field of the i2c_client struct is redundant. The same data can be accessed through to_i2c_driver(client->dev.driver). The generated code for both approaches in more or less the same. E.g. on ARM the expression client->driver->command(...) generates ... ldr r3, [r0, torvalds#28] ldr r3, [r3, torvalds#32] blx r3 ... and the expression to_i2c_driver(client->dev.driver)->command(...) generates ... ldr r3, [r0, torvalds#160] ldr r3, [r3, #-4] blx r3 ... Other architectures will generate similar code. All users of the 'driver' field outside of the I2C core have already been converted. So this only leaves the core itself. This patch converts the remaining few users in the I2C core and then removes the 'driver' field from the i2c_client struct. Signed-off-by: Lars-Peter Clausen <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>

commit 62d2feb upstream. Fix crash after issuing: echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device [ 37.180999] device: '2-001e': device_add [ 37.188293] bus: 'i2c': add device 2-001e [ 37.194549] PM: Adding info for i2c:2-001e [ 37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843 [ 37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e [ 37.224884] HMC5843 initialized [ 37.228759] ------------[ cut here ]------------ [ 37.233612] kernel BUG at mm/slab.c:505! [ 37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT [ 37.243103] Modules linked in: [ 37.246337] CPU: 0 Not tainted (3.3.1-gta04+ torvalds#28) [ 37.251647] PC is at kfree+0x84/0x144 [ 37.255493] LR is at kfree+0x20/0x144 [ 37.259338] pc : [<c00b408c>] lr : [<c00b4028>] psr: 40000093 [ 37.259368] sp : de249cd8 ip : 0000000c fp : 00000090 [ 37.271362] r10: 0000000a r9 : de229eac r8 : c0236274 [ 37.276855] r7 : c09d6490 r6 : a0000013 r5 : de229c00 r4 : de229c10 [ 37.283691] r3 : c0f00218 r2 : 00000400 r1 : c0eea000 r0 : c00b4028 [ 37.290527] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 37.298095] Control: 10c5387d Table: 9e1d0019 DAC: 00000015 [ 37.304107] Process sh (pid: 91, stack limit = 0xde2482f0) [ 37.309844] Stack: (0xde249cd8 to 0xde24a000) [ 37.314422] 9cc0: de229c10 de229c00 [ 37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80 [ 37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005 [ 37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10 [ 37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594 [ 37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020 [ 37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48 [ 37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00 [ 37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40 [ 37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48 [ 37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20 [ 37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28 [ 37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8 [ 37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58 [ 37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000 [ 37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000 [ 37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0 [ 37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354 [ 37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8 [ 37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8 [ 37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004 [ 37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000 [ 37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000 [ 37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000 [ 37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c) [ 37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990) [ 37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114) [ 37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) [ 37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218) [ 37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) [ 37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4) [ 37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c) [ 37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c) [ 37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c) [ 37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) [ 37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24) [ 37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140) [ 37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178) [ 37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68) [ 37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c) [ 37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2) [ 37.700775] ---[ end trace aaf805debdb69390 ]--- Client data was assigned to iio_dev structure in probe but in hmc5843_init_client function casted to private driver data structure which is wrong. Possibly calling mutex_init(&data->lock); corrupt data which the lead to above crash. Signed-off-by: Marek Belisko <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 73e216a upstream. Oleksii reported that he had seen an oops similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4 CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G W O 3.10.1SIGN torvalds#28 Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013 Workqueue: cifsiod cifs_echo_request [cifs] task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000 RIP: 0010:[<ffffffff814dcc13>] [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP: 0000:ffff880148745b00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048 RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78 RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00 R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0 Oops#2 Part7 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8 Call Trace: [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs] [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs] [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs] [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs] Oops#2 Part6 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs] [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs] [<ffffffff810b45b3>] process_one_work+0x173/0x4a0 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0 [<ffffffff810bae00>] kthread+0xc0/0xd0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41 RIP [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP <ffff880148745b00> CR2: 0000000000000088 The client was in the middle of trying to send a frame when the server->ssocket pointer got zeroed out. In most places, that we access that pointer, the srv_mutex is held. There's only one spot that I see that the server->ssocket pointer gets set and the srv_mutex isn't held. This patch corrects that. The upstream bug report was here: https://bugzilla.kernel.org/show_bug.cgi?id=60557 Reported-by: Oleksii Shevchuk <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Fix crash after issuing: echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device [ 37.180999] device: '2-001e': device_add [ 37.188293] bus: 'i2c': add device 2-001e [ 37.194549] PM: Adding info for i2c:2-001e [ 37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843 [ 37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e [ 37.224884] HMC5843 initialized [ 37.228759] ------------[ cut here ]------------ [ 37.233612] kernel BUG at mm/slab.c:505! [ 37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT [ 37.243103] Modules linked in: [ 37.246337] CPU: 0 Not tainted (3.3.1-gta04+ torvalds#28) [ 37.251647] PC is at kfree+0x84/0x144 [ 37.255493] LR is at kfree+0x20/0x144 [ 37.259338] pc : [<c00b408c>] lr : [<c00b4028>] psr: 40000093 [ 37.259368] sp : de249cd8 ip : 0000000c fp : 00000090 [ 37.271362] r10: 0000000a r9 : de229eac r8 : c0236274 [ 37.276855] r7 : c09d6490 r6 : a0000013 r5 : de229c00 r4 : de229c10 [ 37.283691] r3 : c0f00218 r2 : 00000400 r1 : c0eea000 r0 : c00b4028 [ 37.290527] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 37.298095] Control: 10c5387d Table: 9e1d0019 DAC: 00000015 [ 37.304107] Process sh (pid: 91, stack limit = 0xde2482f0) [ 37.309844] Stack: (0xde249cd8 to 0xde24a000) [ 37.314422] 9cc0: de229c10 de229c00 [ 37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80 [ 37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005 [ 37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10 [ 37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594 [ 37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020 [ 37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48 [ 37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00 [ 37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40 [ 37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48 [ 37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20 [ 37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28 [ 37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8 [ 37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58 [ 37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000 [ 37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000 [ 37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0 [ 37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354 [ 37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8 [ 37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8 [ 37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004 [ 37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000 [ 37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000 [ 37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000 [ 37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c) [ 37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990) [ 37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114) [ 37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) [ 37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218) [ 37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) [ 37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4) [ 37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c) [ 37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c) [ 37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c) [ 37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) [ 37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24) [ 37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140) [ 37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178) [ 37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68) [ 37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c) [ 37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2) [ 37.700775] ---[ end trace aaf805debdb69390 ]--- Client data was assigned to iio_dev structure in probe but in hmc5843_init_client function casted to private driver data structure which is wrong. Possibly calling mutex_init(&data->lock); corrupt data which the lead to above crash. Signed-off-by: Marek Belisko <[email protected]> Cc: stable <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The driver calls cxgb_vlan_mode() from init_one(). This calls into synchronize_rx(), which locks all the q locks, but the q locks are not initialized until cxgb_up() -> setup_sge_qsets(). So move the call to cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets(). We also move the body of these functions up higher to avoid having to a forward declaration. This was found because of the lockdep warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 torvalds#28 Call Trace: [<ffffffff8106e767>] register_lock_class+0x108/0x2d0 [<ffffffff8106ff42>] __lock_acquire+0xd3/0xd06 [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe [<ffffffff813862a6>] _raw_spin_lock_irq+0x36/0x45 [<ffffffffa01e71aa>] cxgb_vlan_mode+0x96/0xcb [cxgb3] [<ffffffffa01f90eb>] init_one+0x8c4/0x980 [cxgb3] [<ffffffff811fcbf0>] local_pci_probe+0x3f/0x70 [<ffffffff81042206>] do_work_for_cpu+0x10/0x22 [<ffffffff810482de>] kthread+0xa1/0xa9 [<ffffffff8138e234>] kernel_thread_helper+0x4/0x10 Contrary to what lockdep says, the code is not fine: we are locking an uninitialized spinlock. Signed-off-by: Roland Dreier <[email protected]> Signed-off-by: David S. Miller <[email protected]>

We need to defer the free request until the object/vma is capable of being freed - or else we have a problem when we try to destroy the context. The exact same issue is described and fixed here: commit e207804 Author: Ben Widawsky <[email protected]> Date: Fri Dec 6 14:11:22 2013 -0800 drm/i915: Defer request freeing I had this fix previously, but decided not to keep it for some reason I can no longer remember. gem_reset_stats is a really good test at hitting the problem. For the inquisitive: [ 170.516392] ------------[ cut here ]------------ [ 170.517227] WARNING: CPU: 1 PID: 105 at drivers/gpu/drm/drm_mm.c:578 drm_mm_takedown+0x2e/0x30 [drm]() [ 170.518064] Memory manager not clean during takedown. [ 170.518941] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 3.13.0-rc4-BEN+ torvalds#28 [ 170.519787] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012 [ 170.520662] Call Trace: [ 170.521517] [<ffffffff814f0589>] dump_stack+0x4e/0x7a [ 170.522373] [<ffffffff81049e6d>] warn_slowpath_common+0x7d/0xa0 [ 170.523227] [<ffffffff81049edc>] warn_slowpath_fmt+0x4c/0x50 [ 170.524079] [<ffffffffa06c414e>] drm_mm_takedown+0x2e/0x30 [drm] [ 170.524934] [<ffffffffa07213f3>] gen6_ppgtt_cleanup+0x23/0x110 [i915] [ 170.525777] [<ffffffffa07837ed>] ppgtt_release.part.5+0x24/0x29 [i915] [ 170.526603] [<ffffffffa071aaa5>] i915_gem_context_free+0x195/0x1a0 [i915] [ 170.527423] [<ffffffffa071189d>] i915_gem_free_request+0x9d/0xb0 [i915] [ 170.528247] [<ffffffffa0718af9>] i915_gem_reset+0x1f9/0x3f0 [i915] [ 170.529065] [<ffffffffa0700cce>] i915_reset+0x4e/0x180 [i915] [ 170.529870] [<ffffffffa070829d>] i915_error_work_func+0xcd/0x120 [i915] [ 170.530666] [<ffffffff8106c13a>] process_one_work+0x1fa/0x6d0 [ 170.531453] [<ffffffff8106c0d8>] ? process_one_work+0x198/0x6d0 [ 170.532230] [<ffffffff8106c72b>] worker_thread+0x11b/0x3a0 [ 170.532996] [<ffffffff8106c610>] ? process_one_work+0x6d0/0x6d0 [ 170.533771] [<ffffffff810743ef>] kthread+0xff/0x120 [ 170.534548] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.535322] [<ffffffff814f97ac>] ret_from_fork+0x7c/0xb0 [ 170.536089] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.536847] ---[ end trace 3d4c12892e42d58f ]--- v2: Whitespace fix. (Chris) Note: This is a bug that only hits the ppgtt topic branch but I've figured that doing the request cleanup in this order is generally the right thing to do. Signed-off-by: Ben Widawsky <[email protected]> [danvet: Add a code comment to clarify what's actually going on since the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also add a note about why we need this.] Signed-off-by: Daniel Vetter <[email protected]>

We need to defer the free request until the object/vma is capable of being freed - or else we have a problem when we try to destroy the context. The exact same issue is described and fixed here: commit e207804 Author: Ben Widawsky <[email protected]> Date: Fri Dec 6 14:11:22 2013 -0800 drm/i915: Defer request freeing I had this fix previously, but decided not to keep it for some reason I can no longer remember. gem_reset_stats is a really good test at hitting the problem. For the inquisitive: [ 170.516392] ------------[ cut here ]------------ [ 170.517227] WARNING: CPU: 1 PID: 105 at drivers/gpu/drm/drm_mm.c:578 drm_mm_takedown+0x2e/0x30 [drm]() [ 170.518064] Memory manager not clean during takedown. [ 170.518941] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 3.13.0-rc4-BEN+ #28 [ 170.519787] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.02 04/27/2012 [ 170.520662] Call Trace: [ 170.521517] [<ffffffff814f0589>] dump_stack+0x4e/0x7a [ 170.522373] [<ffffffff81049e6d>] warn_slowpath_common+0x7d/0xa0 [ 170.523227] [<ffffffff81049edc>] warn_slowpath_fmt+0x4c/0x50 [ 170.524079] [<ffffffffa06c414e>] drm_mm_takedown+0x2e/0x30 [drm] [ 170.524934] [<ffffffffa07213f3>] gen6_ppgtt_cleanup+0x23/0x110 [i915] [ 170.525777] [<ffffffffa07837ed>] ppgtt_release.part.5+0x24/0x29 [i915] [ 170.526603] [<ffffffffa071aaa5>] i915_gem_context_free+0x195/0x1a0 [i915] [ 170.527423] [<ffffffffa071189d>] i915_gem_free_request+0x9d/0xb0 [i915] [ 170.528247] [<ffffffffa0718af9>] i915_gem_reset+0x1f9/0x3f0 [i915] [ 170.529065] [<ffffffffa0700cce>] i915_reset+0x4e/0x180 [i915] [ 170.529870] [<ffffffffa070829d>] i915_error_work_func+0xcd/0x120 [i915] [ 170.530666] [<ffffffff8106c13a>] process_one_work+0x1fa/0x6d0 [ 170.531453] [<ffffffff8106c0d8>] ? process_one_work+0x198/0x6d0 [ 170.532230] [<ffffffff8106c72b>] worker_thread+0x11b/0x3a0 [ 170.532996] [<ffffffff8106c610>] ? process_one_work+0x6d0/0x6d0 [ 170.533771] [<ffffffff810743ef>] kthread+0xff/0x120 [ 170.534548] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.535322] [<ffffffff814f97ac>] ret_from_fork+0x7c/0xb0 [ 170.536089] [<ffffffff810742f0>] ? insert_kthread_work+0x80/0x80 [ 170.536847] ---[ end trace 3d4c12892e42d58f ]--- v2: Whitespace fix. (Chris) Note: This is a bug that only hits the ppgtt topic branch but I've figured that doing the request cleanup in this order is generally the right thing to do. Signed-off-by: Ben Widawsky <[email protected]> [danvet: Add a code comment to clarify what's actually going on since the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also add a note about why we need this.] Signed-off-by: Daniel Vetter <[email protected]>

Kernel will dump when run deinterlace stress test. It is caused by vditmpbuf being reallocated by another thread when one thread accesses it. Issue is fixed by putting these code in mutex. Kernel dump log: [Playing ][Vol=01][00:00:10/00:00:30][fps:32]Unable to handle kernel paging request at virtual address 607d6085 pgd = 80004000 [607d6085] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 50 Comm: ipu2_task Not tainted 3.10.17-02308-g3700819 torvalds#28 task: ac1dc700 ti: ac1ba000 task.ti: ac1ba000 PC is at __kmalloc+0x40/0x114 LR is at __kmalloc+0x14/0x114 pc : [<800bbd40>] lr : [<800bbd14>] psr: 200f0013 sp : ac1bbbc8 ip : 008cc000 fp : 00001e40 r10: ac772e00 r9 : 0057b255 r8 : 000000d0 r7 : 00000790 r6 : ac773800 r5 : 607d6085 r4 : ac001b00 r3 : 00000000 r2 : 814f92a0 r1 : 000000d0 r0 : 000398c9 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 3c4c004a DAC: 00000015 Process ipu2_task (pid: 50, stack limit = 0xac1ba238) Stack: (0xac1bbbc8 to 0xac1bc000) Signed-off-by: Sandor Yu <[email protected]>

I'm getting the spew below when booting with Haswell (Xeon E5-2699 v3) CPUs and the "Cluster-on-Die" (CoD) feature enabled in the BIOS. It seems similar to the issue that some folks from AMD ran in to on their systems and addressed in this commit: 161270f ("x86/smp: Fix topology checks on AMD MCM CPUs") Both these Intel and AMD systems break an assumption which is being enforced by topology_sane(): a socket may not contain more than one NUMA node. AMD special-cased their system by looking for a cpuid flag. The Intel mode is dependent on BIOS options and I do not know of a way which it is enumerated other than the tables being parsed during the CPU bringup process. In other words, we have to trust the ACPI tables <shudder>. This detects the situation where a NUMA node occurs at a place in the middle of the "CPU" sched domains. It replaces the default topology with one that relies on the NUMA information from the firmware (SRAT table) for all levels of sched domains above the hyperthreads. This also fixes a sysfs bug. We used to freak out when we saw the "mc" group cross a node boundary, so we stopped building the MC group. MC gets exported as the 'core_siblings_list' in /sys/devices/system/cpu/cpu*/topology/ and this caused CPUs with the same 'physical_package_id' to not be listed together in 'core_siblings_list'. This violates a statement from Documentation/ABI/testing/sysfs-devices-system-cpu: core_siblings: internal kernel map of cpu#'s hardware threads within the same physical_package_id. core_siblings_list: human-readable list of the logical CPU numbers within the same physical_package_id as cpu#. The sysfs effects here cause an issue with the hwloc tool where it gets confused and thinks there are more sockets than are physically present. Before this patch, there are two packages: # cd /sys/devices/system/cpu/ # cat cpu*/topology/physical_package_id | sort | uniq -c 18 0 18 1 But 4 _sets_ of core siblings: # cat cpu*/topology/core_siblings_list | sort | uniq -c 9 0-8 9 18-26 9 27-35 9 9-17 After this set, there are only 2 sets of core siblings, which is what we expect for a 2-socket system. # cat cpu*/topology/physical_package_id | sort | uniq -c 18 0 18 1 # cat cpu*/topology/core_siblings_list | sort | uniq -c 18 0-17 18 18-35 Example spew: ... NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. #2 #3 #4 #5 torvalds#6 torvalds#7 torvalds#8 .... node #1, CPUs: torvalds#9 ------------[ cut here ]------------ WARNING: CPU: 9 PID: 0 at /home/ak/hle/linux-hle-2.6/arch/x86/kernel/smpboot.c:306 topology_sane.isra.2+0x74/0x90() sched: CPU torvalds#9's mc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. Modules linked in: CPU: 9 PID: 0 Comm: swapper/9 Not tainted 3.17.0-rc1-00293-g8e01c4d-dirty torvalds#631 Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0036.R05.1407140519 07/14/2014 0000000000000009 ffff88046ddabe00 ffffffff8172e485 ffff88046ddabe48 ffff88046ddabe38 ffffffff8109691d 000000000000b001 0000000000000009 ffff88086fc12580 000000000000b020 0000000000000009 ffff88046ddabe98 Call Trace: [<ffffffff8172e485>] dump_stack+0x45/0x56 [<ffffffff8109691d>] warn_slowpath_common+0x7d/0xa0 [<ffffffff8109698c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff81074f94>] topology_sane.isra.2+0x74/0x90 [<ffffffff8107530e>] set_cpu_sibling_map+0x31e/0x4f0 [<ffffffff8107568d>] start_secondary+0x1ad/0x240 ---[ end trace 3fe5f587a9fcde61 ]--- torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 torvalds#16 torvalds#17 .... node #2, CPUs: torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 torvalds#24 torvalds#25 torvalds#26 .... node #3, CPUs: torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 torvalds#32 torvalds#33 torvalds#34 torvalds#35 Signed-off-by: Dave Hansen <[email protected]> [ Added LLC domain and s/match_mc/match_die/ ] Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: David Rientjes <[email protected]> Cc: Igor Mammedov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Prarit Bhargava <[email protected]> Cc: Toshi Kani <[email protected]> Cc: [email protected] Cc: "H. Peter Anvin" <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>

GIT 2cf50762577a191f2f646e4034cc21f4764d90ab commit 68c7ed167ef564c83a0022f2d0fe15cbdac0c5a4 Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:04 2014 +1000 Documentation: disable vdso_test to avoid breakage with old glibc glibc versions older than 2.16 don't include sys/auxv.h which this executable uses. Since we don't have a good way to test for specific glibc versions in kbuild, just disable it for now. Signed-off-by: Peter Foley <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> commit 03979f1100aca61cf16ac7f3e464d7f11747e86b Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:04 2014 +1000 Documentation: update vDSO makefile to build portable examples Signed-off-by: Peter Foley <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> commit 13770826a9872de445703ee6c05b44f525f78513 Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:04 2014 +1000 Documentation: update .gitignore files Add some missing files to .gitignore. Push Documentation/.gitignore down into subdirectories. Signed-off-by: Peter Foley <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> commit ce0f3b2691c066255fcf25c77e929ff8cda73417 Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:03 2014 +1000 Documentation: support glibc versions without htole macros glibc 2.9 introduced the htole<16/32/64> macros, add them to tools/include to support older versions of glibc. Reported-by: Andrew Morton <[email protected]> Signed-off-by: Peter Foley <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> commit 77cb6d96708f5b681969ce144057ae1ebda96057 Author: Mark Brown <[email protected]> Date: Thu Sep 25 10:34:03 2014 +1000 v4l2-pci-skeleton: Only build if PCI is available Currently arm64 does not support PCI but it does support v4l2. Since the PCI skeleton driver is built unconditionally as a module with no dependency on PCI this causes build failures for arm64 allmodconfig. Fix this by defining a symbol VIDEO_PCI_SKELETON for the skeleton and conditionalising the build on that. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> [added VIDEO dependencies] commit 112a45ca901ced590ff71c5fd7d717f8771717ce Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:03 2014 +1000 Documentation: fix misc. warnings Fix a few warnings that gcc emits during a default build. Signed-off-by: Peter Foley <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> commit b0fc375fe2c09477b5effc8e030668203d24c897 Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:03 2014 +1000 Documentation: make functions static to avoid prototype warnings Signed-off-by: Peter Foley <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> commit 593ed472bcea93949c72ddc45e340fee47a05aa3 Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:03 2014 +1000 Documentation: add makefiles for more targets Add a bunch of previously unbuilt source files to the Documentation build machinery. Signed-off-by: Peter Foley <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> commit cc67d673f252264535cef654c37c8dd621340e8b Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:02 2014 +1000 Documentation: use subdir-y to avoid unnecessary built-in.o files Change the Documentation makefiles from obj-m to subdir-y to avoid generating unnecessary built-in.o files since nothing in Documentation/ is ever linked in to vmlinux. Signed-off-by: Peter Foley <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> commit bb69afeca345380203c89d2f19e95eca786b5a4c Author: Peter Foley <[email protected]> Date: Thu Sep 25 10:34:02 2014 +1000 Documentation: remove networking/.gitignore Remove empty networking/.gitignore Signed-off-by: Peter Foley <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Randy Dunlap <[email protected]> commit 4d96fb1ec81118c6406fe6d3670f172b2faaedf3 Author: Heiko Stuebner <[email protected]> Date: Tue Sep 23 22:42:16 2014 +0200 power: gpio-charger: do not use gpio value directly Some gpio implementations return interesting values for gpio_get_value when the value is not 0 - as seen on a imx6sl board. Therefore do not use the value returned from gpio_get_value directly but simply check for 0 or not 0. Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Doug Anderson <[email protected]> Tested-by: Doug Anderson <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> commit ddd26dff757d08d4eb309a28bf2a02372387e71f Author: Krzysztof Kozlowski <[email protected]> Date: Tue Sep 16 18:10:41 2014 +0200 power: max8925: Use of_get_child_by_name Use of_get_child_by_name to obtain reference to charger node instead of of_find_node_by_name which can walk outside of the parent node. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> commit 920ac5be91bc447c5ef82f457207a169aa79c5f6 Author: Krzysztof Kozlowski <[email protected]> Date: Tue Sep 16 18:10:40 2014 +0200 power: max8925: Fix NULL ptr dereference on memory allocation failure Check the return value of devm_kzalloc() to fix possible NULL pointer dereference and properly exit the probe() on memory allocation failure. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> commit 628ef02c56e515430dd8d8439126dd0ecb8ce8bb Author: Puthikorn Voravootivat <[email protected]> Date: Tue Sep 9 12:20:35 2014 -0700 bq27x00_battery: Add support to bq27742 Add support to bq27742 in bq27x00 driver. bq27742 register addresses are mostly mostly the same as bq27500 addresses with minor differences. Signed-off-by: Puthikorn Voravootivat <[email protected]> Reviewed-by: Gwendal Grignou <[email protected]> Reviewed-by: Rhyland Klein <[email protected]> Reviewed-by: Benson Leung <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> commit 042e1c79166b9250edd8262bea84e1703f27ad2e Author: Jin Yao <[email protected]> Date: Mon Sep 22 10:31:14 2014 -0700 Input: soc_button_array - convert to platform bus ACPI device enumeration mechanism changed a lot since 3.16-rc1. ACPI device objects with _HID will be enumerated to platform bus by default. For the existing PNP drivers that probe the PNPACPI devices, the device ids are listed explicitly in drivers/acpi/acpi_pnp.c. But ACPI folks will continue their effort on shrinking this id list by converting the PNP drivers to platform drivers, for the devices that don't belong to PNP bus in nature. Signed-off-by: Jin Yao <[email protected]> Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]> commit 3049683eafdbbbd7350b0e5ca02a2d8c026a3362 Author: Marcos Paulo de Souza <[email protected]> Date: Wed Sep 24 16:00:33 2014 -0700 Input: i8042 - fix Asus X450LCP touchpad detection We need to add this module to the nomux table to be able to detect the touchpad. Cc: stablevger.kernel.org Signed-off-by: Marcos Paulo de Souza <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]> commit 3f3d0463636e38a27c3000d59889b8bdc9072ce1 Author: Javier Martinez Canillas <[email protected]> Date: Thu Sep 25 08:23:26 2014 +0900 ARM: dts: Remove display timings node from exynos5250-snow Commit a3d72cad63ed ("ARM: dts: Clean up exynos5250-snow") improved the Snow DTS but the patch was rebased due conflicting changes and the merge resolution added a device node removed by commit a98c3c23868f ("ARM: dts: update display related nodes for exynos5250-snow"). This patch removes the node again to keep the DTS as before. Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Kukjin Kim <[email protected]> commit dd12ac7fb3988be113465f499ad91b30b8aa4bdd Author: Javier Martinez Canillas <[email protected]> Date: Thu Sep 25 08:21:25 2014 +0900 ARM: dts: Fix chip select GPIO on exynos5250-smdk5250 Commit 65bbe3fee0e1 ("ARM: dts: Clean up exynos5250-smdk5250") improved the smdk5250 DTS but the patch was rebased due conflicting changes and the merge resolution added a regression of the bug fixed in commit e138d4333aa0 ("ARM: dts: fix the chip select gpios definition in the SPI nodes"). This patch fixes the issue by removing the old cs-gpio and using the generic cs-gpios property. Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Kukjin Kim <[email protected]> commit 5c4dd348af35a6f6db97b4f2401f74c71f7f3c7d Author: Rafael J. Wysocki <[email protected]> Date: Thu Sep 25 00:53:44 2014 +0200 Revert "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()" Revert commit 6efde38f0769 (PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()) that introduced a NULL pointer dereference during system resume from hibernation: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 PGD b39c2067 PUD b39c1067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: <irrelevant list of modules> CPU: 1 PID: 4898 Comm: s2disk Tainted: G C 3.17-rc5-amd64 #1 Debian 3.17~rc5-1~exp1 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 task: ffff88023155ea40 ti: ffff8800b3b14000 task.ti: ffff8800b3b14000 RIP: 0010:[<ffffffff810a8cc1>] [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 RSP: 0018:ffff8800b3b17ea8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800b39bab00 RCX: 0000000000000001 RDX: ffff8800b39bab10 RSI: ffff8800b39bab00 RDI: 0000000000000000 RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800b39bab10 R11: 0000000000000246 R12: ffffea0000000000 R13: ffff880232f485a0 R14: ffff88023ac27cd8 R15: ffff880232927590 FS: 00007f406d83b700(0000) GS:ffff88023bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000b3a62000 CR4: 00000000000007e0 Stack: ffff8800b39bab00 0000000000000010 ffff880232927590 ffffffff810acb4a ffff8800b39bab00 ffffffff811a955a ffff8800b39bab10 0000000000000000 ffff88023155f098 ffffffff81a6b8c0 ffff88023155ea40 0000000000000007 Call Trace: [<ffffffff810acb4a>] ? snapshot_release+0x2a/0xb0 [<ffffffff811a955a>] ? __fput+0xca/0x1d0 [<ffffffff81080627>] ? task_work_run+0x97/0xd0 [<ffffffff81012d89>] ? do_notify_resume+0x69/0xa0 [<ffffffff8151452a>] ? int_signal+0x12/0x17 Code: 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 41 54 48 8b 05 ba 62 9c 00 49 bc 00 00 00 00 00 ea ff ff 48 8b 3d a1 62 9c 00 55 53 <48> 8b 10 48 89 50 18 48 8b 52 20 48 c7 40 28 00 00 00 00 c7 40 RIP [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 RSP <ffff8800b3b17ea8> CR2: 0000000000000000 ---[ end trace f02be86a1ec0cccb ]--- due to forbidden_pages_map being NULL in swsusp_free(). Fixes: 6efde38f0769 "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()" Reported-by: Bjørn Mork <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> commit a928f97152ea39c31f8ea89b60dd30a169d4ed6e Author: Peter Hüwe <[email protected]> Date: Fri Sep 12 21:09:47 2014 +0200 i2c: acpi: Fix NULL Pointer dereference If adapter->dev.parent == NULL there is a NULL pointer dereference in acpi_i2c_install_space_handler and acpi_i2c_remove_space_handler. This is present since introduction of this code: 366047515c6e "i2c: rework kernel config I2C_ACPI" or even da3c6647ee08 "I2C/ACPI: Clean up I2C ACPI code and Add CONFIG_I2C_ACPI" The adapter->dev.parent == NULL case is valid for the i2c_stub, so loading i2c_stub with ACPI_I2C_OPREGION enabled results in an oops. This is also valid at least for i2c_tiny_usb and i2c_robotfuzz_osif. Fix by checking whether it is null before calling ACPI_HANDLE. Signed-off-by: Peter Huewe <[email protected]> Acked-by: Mika Westerberg <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> commit c15d821ddb9dac9ac6b5beb75bf942f3bc3a4004 Author: Srinivas Pandruvada <[email protected]> Date: Tue Sep 23 10:35:54 2014 +0800 gpio / ACPI: Use pin index and bit length Fix code when the operation region callback is for an gpio, which is not at index 0 and for partial pins in a GPIO definition. For example: Name (GMOD, ResourceTemplate () { //3 Outputs that define the Power mode of the device GpioIo (Exclusive, PullDown, , , , "\\_SB.GPI2") {10, 11, 12} }) } If opregion callback calls is for: - Set pin 10, then address = 0 and bit length = 1 - Set pin 11, then address = 1 and bit length = 1 - Set for both pin 11 and pin 12, then address = 1, bit length = 2 This change requires updated ACPICA gpio operation handler code to send the pin index and bit length. Fixes: 473ed7be0da0 (gpio / ACPI: Add support for ACPI GPIO operation regions) Signed-off-by: Srinivas Pandruvada <[email protected]> Acked-by: Mika Westerberg <[email protected]> Acked-by: Linus Walleij <[email protected]> Cc: 3.15+ <[email protected]> # 3.15+: 75ec6e55f138 ACPICA: Update to GPIO region handler interface. Signed-off-by: Rafael J. Wysocki <[email protected]> commit 75ec6e55f1384548311a13ce4fcb39c516053314 Author: Bob Moore <[email protected]> Date: Tue Sep 23 10:35:47 2014 +0800 ACPICA: Update to GPIO region handler interface. Changes to correct several GPIO issues: 1) The update_rule in a GPIO field definition is now ignored; a read-modify-write operation is never performed for GPIO fields. (Internally, this means that the field assembly/disassembly code is completely bypassed for GPIO.) 2) The Address parameter passed to a GPIO region handler is now the bit offset of the field from a previous Connection() operator. Thus, it becomes a "Pin Number Index" into the Connection() resource descriptor. 3) The bit_width parameter passed to a GPIO region handler is now the exact bit width of the GPIO field. Thus, it can be interpreted as "number of pins". Overall, we can now say that the region handler interface to GPIO handlers is a raw "bit/pin" addressed interface, not a byte-addressed interface like the system_memory handler interface. Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Lv Zheng <[email protected]> Cc: 3.15+ <[email protected]> # 3.15+ Signed-off-by: Rafael J. Wysocki <[email protected]> commit 457920817e645a7dee42c2a75c81c5ed8e12ee1c Author: Fu Zhonghui <[email protected]> Date: Wed Sep 24 22:42:26 2014 +0200 ACPI / platform / LPSS: disable async suspend/resume of LPSS devices On some systems (Asus T100 in particular) there are strict ordering dependencies between LPSS devices with respect to power management that break if they suspend/resume asynchronously. In theory it should be possible to follow those dependencies in the async suspend/resume case too (the ACPI tables tell as that the dependencies are there), but since we're missing infrastructure for that at the moment, disable async suspend/resume for all of the LPSS devices for the time being. Link: http://marc.info/?l=linux-acpi&m=141158962321905&w=2 Fixes: 8ce62f85a81f (ACPI / platform / LPSS: Enable async suspend/resume of LPSS devices) Signed-off-by: Li Aubrey <[email protected]> Signed-off-by: Fu Zhonghui <[email protected]> Cc: 3.16+ <[email protected]> # 3.16+ [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <[email protected]> commit c7da579763f29cf45a861ad4c339aba590d8b80d Author: Johan Hedberg <[email protected]> Date: Wed Sep 24 22:41:46 2014 +0300 Bluetooth: Add retransmission effort into SCO parameter table It is expected that new parameter combinations will have the retransmission effort value different between some entries (mainly because of the new S4 configuration added by HFP 1.7), so it makes sense to move it into the table instead of having it hard coded based on the selected SCO_AIRMODE_*. Signed-off-by: Johan Hedberg <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> commit b2fc3f3c6d397d434174147eca3db1ec778195ce Author: Olof Johansson <[email protected]> Date: Wed Sep 24 11:42:38 2014 -0700 drivers/soc: ti: fix build break with modules Fixes below build break by not switching to stubs when the driver is a module: drivers/soc/ti/knav_dma.c:418:7: error: redefinition of 'knav_dma_open_channel' void *knav_dma_open_channel(struct device *dev, const char *name, ^ In file included from drivers/soc/ti/knav_dma.c:26:0: include/linux/soc/ti/knav_dma.h:165:21: note: previous definition of 'knav_dma_open_channel' was here static inline void *knav_dma_open_channel(struct device *dev, const char *name, ^ Cc: Santosh Shilimkar <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit 2d9251e3501356ceb44444a8f9a393b57163dc6a Author: Matthias Brugger <[email protected]> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: multi_v7_defconfig: Enable Mediatek platform Enable Mediatek platform support for multi_v7_defconfig. Signed-off-by: Matthias Brugger <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit d66820853251e8a9b53125a95a773e482cd79136 Author: Matthias Brugger <[email protected]> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: mediatek: Add earlyprintk support for mt6589 Enable low-level debug for Mediatek mt6589 SoC on UART0. Signed-off-by: Matthias Brugger <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit 7e9b2828f25ec156623da0c2156604066de5514d Author: Matthias Brugger <[email protected]> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: mt6589: Change compatible string for GIC This patch changes the compatible string of the GIC to the new "arm,cortex-a7-gic" which does reflect the actual hardware. Signed-off-by: Matthias Brugger <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit 6e9cb2633698ddadd2493b3793dbc9723f570538 Author: Matthias Brugger <[email protected]> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: mediatek: Add compatible property for aquaris5 Add the missing 'compatible' property to device tree root node of - mt6589-aquaris5.dts and document the new values. Signed-off-by: Matthias Brugger <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit d82df11466df3e0934c7e7aa2f5e08c284e1fd9d Author: Matthias Brugger <[email protected]> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk Add boot argument for earlyprintk to the aquaris5 device tree file. Signed-off-by: Matthias Brugger <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit 510f1d72e526e776243397142cbcd459dd2a2efa Author: Matthias Brugger <[email protected]> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: mt6589: Fix typo in GIC unit address This changes the unit address of the gic node to it's first register area. Signed-off-by: Matthias Brugger <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit 995425883e4087a4bfd61d12e442089d1201fc5c Author: Matthias Brugger <[email protected]> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: Build dtb for Mediatek board This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek SoC. Signed-off-by: Matthias Brugger <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit 00e978180b1fa211c30642139149ea448ff06c55 Author: Pawel Moll <[email protected]> Date: Mon Sep 15 15:33:48 2014 +0100 bus: arm-ccn: Fix spurious warning message Because CCN's cycle counter always runs, it will generate an interrupt on overflow even if the relevant perf event was not requested, causing a spurious warning message. Fixed now by warning on only normal counter unwanted overflows. Also cleaning the overflow mask at init now, not to warn on event previously requested by firmware. Signed-off-by: Pawel Moll <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit 94e57fea62020dbf6e5d0093eabcd28366e86044 Author: Francesco Ruggeri <[email protected]> Date: Wed Sep 24 10:12:41 2014 -0700 PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.h Move PCI_VENDOR_ID_VMWARE from device-specific files to pci_ids.h. It is useful to always have access to it, especially when accessing subsystem_vendor_id on emulated devices. [bhelgaas: keep pci_ids.h sorted and use lower-case hex] Signed-off-by: Francesco Ruggeri <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 17497acbdce9506fd6a75115dee4ab80c3cc5ee5 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:50 2014 -0400 blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode blk-mq uses percpu_ref for its usage counter which tracks the number of in-flight commands and used to synchronously drain the queue on freeze. percpu_ref shutdown takes measureable wallclock time as it involves a sched RCU grace period. This means that draining a blk-mq takes measureable wallclock time. One would think that this shouldn't matter as queue shutdown should be a rare event which takes place asynchronously w.r.t. userland. Unfortunately, SCSI probing involves synchronously setting up and then tearing down a lot of request_queues back-to-back for non-existent LUNs. This means that SCSI probing may take above ten seconds when scsi-mq is used. [ 0.949892] scsi host0: Virtio SCSI HBA [ 1.007864] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.021299] scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.520356] tsc: Refined TSC clocksource calibration: 2491.910 MHz <stall> [ 16.186549] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.190478] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 16.194099] osd: LOADED open-osd 0.2.1 [ 16.203202] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.208478] sd 0:0:0:0: [sda] Write Protect is off [ 16.211439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.218771] sd 0:0:1:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.223264] sd 0:0:1:0: [sdb] Write Protect is off [ 16.225682] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA This is also the reason why request_queues start in bypass mode which is ended on blk_register_queue() as shutting down a fully functional queue also involves a RCU grace period and the queues for non-existent SCSI devices never reach registration. blk-mq basically needs to do the same thing - start the mq in a degraded mode which is faster to shut down and then make it fully functional only after the queue reaches registration. percpu_ref recently grew facilities to force atomic operation until explicitly switched to percpu mode, which can be used for this purpose. This patch makes blk-mq initialize q->mq_usage_counter in atomic mode and switch it to percpu mode only once blk_register_queue() is reached. Note that this issue was previously worked around by 0a30288da1ae ("blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe") for v3.17. The temp fix was reverted in preparation of adding persistent atomic mode to percpu_ref by 9eca80461a45 ("Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe""). This patch and the prerequisite percpu_ref changes will be merged during v3.18 devel cycle. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Christoph Hellwig <[email protected]> Link: http://lkml.kernel.org/g/[email protected] Fixes: add703fda981 ("blk-mq: use percpu_ref for mq usage count") Reviewed-by: Kent Overstreet <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Johannes Weiner <[email protected]> commit e4de4d412fc0d07f820906dcd70ede06dad312e2 Author: Olof Johansson <[email protected]> Date: Wed Sep 24 10:34:06 2014 -0700 ARM: at91: Fix bad conflict resolution in board-dt-sama5.c Signed-off-by: Olof Johansson <[email protected]> commit 3c9703a87bdda1fef221ab0957a3ec2a2126f129 Author: Olof Johansson <[email protected]> Date: Wed Sep 24 10:32:20 2014 -0700 Revert "ARM: make arrays containing machine compatible strings const" I dropped it from next/cleanup, doing a revert on for-next instead of rebuilding the branch. This reverts commit fbce9bc876ab2c905f1f82a78bc25745e98760d9. commit 1cae13e75b7a7848c03138636d4eb8d8a5054dd5 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:50 2014 -0400 percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky Currently, a percpu_ref which is initialized with PERPCU_REF_INIT_ATOMIC or switched to atomic mode via switch_to_atomic() automatically reverts to percpu mode on the first percpu_ref_reinit(). This makes the atomic mode difficult to use for cases where a percpu_ref is used as a persistent on/off switch which may be cycled multiple times. This patch makes such atomic state sticky so that it survives through kill/reinit cycles. After this patch, atomic state is cleared only by an explicit percpu_ref_switch_to_percpu() call. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Johannes Weiner <[email protected]> commit 2aad2a86f6685c10360ec8a5a55eb9ab7059cb72 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:50 2014 -0400 percpu_ref: add PERCPU_REF_INIT_* flags With the recent addition of percpu_ref_reinit(), percpu_ref now can be used as a persistent switch which can be turned on and off repeatedly where turning off maps to killing the ref and waiting for it to drain; however, there currently isn't a way to initialize a percpu_ref in its off (killed and drained) state, which can be inconvenient for certain persistent switch use cases. Similarly, percpu_ref_switch_to_atomic/percpu() allow dynamic selection of operation mode; however, currently a newly initialized percpu_ref is always in percpu mode making it impossible to avoid the latency overhead of switching to atomic mode. This patch adds @flags to percpu_ref_init() and implements the following flags. * PERCPU_REF_INIT_ATOMIC : start ref in atomic mode * PERCPU_REF_INIT_DEAD : start ref killed and drained These flags should be able to serve the above two use cases. v2: target_core_tpg.c conversion was missing. Fixed. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Johannes Weiner <[email protected]> commit f47ad45784611297b699f3dffb6c7222b76afe64 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:49 2014 -0400 percpu_ref: decouple switching to percpu mode and reinit percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out percpu mode switching into percpu_ref_switch_to_percpu() and reimplements percpu_ref_reinit() on top of it. * DEAD still requires ATOMIC. A dead ref can't be switched to percpu mode w/o going through reinit. v2: __percpu_ref_switch_to_percpu() was missing static. Fixed. Reported by Fengguang aka kbuild test robot. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: kbuild test robot <[email protected]> commit 490c79a65708873228cf114cf00e32c204e4e907 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:49 2014 -0400 percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Johannes Weiner <[email protected]> commit 27344a9017cdaff82a167827da3001a0918afdc3 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:49 2014 -0400 percpu_ref: add PCPU_REF_DEAD percpu_ref will be restructured so that percpu/atomic mode switching and reference killing are dedoupled. In preparation, add PCPU_REF_DEAD and PCPU_REF_ATOMIC_DEAD which is OR of ATOMIC and DEAD. For now, ATOMIC and DEAD are changed together and all PCPU_REF_ATOMIC uses are converted to PCPU_REF_ATOMIC_DEAD without causing any behavior changes. percpu_ref_init() now specifies an explicit alignment when allocating the percpu counters so that the pointer has enough unused low bits to accomodate the flags. Note that one flag was fine as min alignment for percpu memory is 2 bytes but two flags are already too many for the natural alignment of unsigned longs on archs like cris and m68k. v2: The original patch had BUILD_BUG_ON() which triggers if unsigned long's alignment isn't enough to accomodate the flags, which triggered on cris and m64k. percpu_ref_init() updated to specify the required alignment explicitly. Reported by Fengguang. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> Cc: kbuild test robot <[email protected]> commit 9e804d1f58da1eca079f796347c1cf1d1df564e2 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:48 2014 -0400 percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch percpu_ref will be restructured so that percpu/atomic mode switching and reference killing are dedoupled. In preparation, do the following renames. * percpu_ref->confirm_kill -> percpu_ref->confirm_switch * __PERCPU_REF_DEAD -> __PERCPU_REF_ATOMIC * __percpu_ref_alive() -> __ref_is_percpu() This patch is pure rename and doesn't introduce any functional changes. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> commit eecc16ba9a49b05dd847a317af166a6728eb56ca Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:48 2014 -0400 percpu_ref: replace pcpu_ prefix with percpu_ percpu_ref uses pcpu_ prefix for internal stuff and percpu_ for externally visible ones. This is the same convention used in the percpu allocator implementation. It works fine there but percpu_ref doesn't have too much internal-only stuff and scattered usages of pcpu_ prefix are confusing than helpful. This patch replaces all pcpu_ prefixes with percpu_. This is pure rename and there's no functional change. Note that PCPU_REF_DEAD is renamed to __PERCPU_REF_DEAD to signify that the flag is internal. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> commit 6251f9976af7656b6970a8820153f356430f5de2 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:48 2014 -0400 percpu_ref: minor code and comment updates * Some comments became stale. Updated. * percpu_ref_tryget() unnecessarily initializes @ret. Removed. * A blank line removed from percpu_ref_kill_rcu(). * Explicit function name in a WARN format string replaced with __func__. * WARN_ON() in percpu_ref_reinit() converted to WARN_ON_ONCE(). Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> commit a2237370194484ee6aeeff04b617e4b14d178966 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:31:48 2014 -0400 percpu_ref: relocate percpu_ref_reinit() percpu_ref is gonna go through restructuring. Move percpu_ref_reinit() after percpu_ref_kill_and_confirm(). This will make later changes easier to follow and result in cleaner organization. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Kent Overstreet <[email protected]> commit 1aafa57340c6d906a285d7823e0fe68696c1ae07 Author: Wei Xu <[email protected]> Date: Wed Sep 24 17:07:48 2014 +0800 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected When compiling with "ARCH=arm" and "allmodconfig", with commit: 9cdc99919a95e8b54c1998b65bb1bfdabd47d27b [2/7] ARM: hisi: enable MCPM implementation we will get: /tmp/cc6DjYjT.s: Assembler messages: /tmp/cc6DjYjT.s:63: Error: selected processor does not support ARM mode `ubfx r1,r0,#8,#8' /tmp/cc6DjYjT.s:761: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:762: Error: selected processor does not support ARM mode `dsb ' /tmp/cc6DjYjT.s:769: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:775: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:776: Error: selected processor does not support ARM mode `dsb ' /tmp/cc6DjYjT.s:795: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:801: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:802: Error: selected processor does not support ARM mode `dsb ' Fix platmcpm compilation when ARMv6 is selected. Signed-off-by: Wei Xu <[email protected]> Signed-off-by: Olof Johansson <[email protected]> commit 495aa2e1facebf770224c33aae2a01541889e54e Author: Liviu Dudau <[email protected]> Date: Tue Sep 23 20:01:14 2014 +0100 arm64: Add architectural support for PCI Use the generic PCI domain and OF functions to provide support for PCI on arm64. [bhelgaas: Change comments to use generic PCI, not just PCIe. Nothing at this level is PCIe-specific.] Signed-off-by: Liviu Dudau <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Catalin Marinas <[email protected]> commit b766eafe68281a12169f9eb8c06fd80d2e7897d7 Author: Liviu Dudau <[email protected]> Date: Tue Sep 23 20:01:13 2014 +0100 PCI: Add pci_remap_iospace() to map bus I/O resources Add pci_remap_iospace() to map bus I/O resources into the CPU virtual address space. Architectures with special needs may provide their own version, but most should be able to use this one. This function is useful for PCI host bridge drivers that need to map the PCI I/O resources into virtual memory space. [bhelgaas: phys_addr description, drop temporary "err" variable] Signed-off-by: Liviu Dudau <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> CC: Arnd Bergmann <[email protected]> commit 5a4f662d44116022e3378b32a1a79b718e110096 Author: Liviu Dudau <[email protected]> Date: Tue Sep 23 20:01:12 2014 +0100 PCI: Assign unassigned bus resources in pci_scan_root_bus() If the firmware has not assigned all the bus resources and we are not just probing the PCI buses, it makes sense to assign the unassigned resources in pci_scan_root_bus(). Signed-off-by: Liviu Dudau <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> CC: Arnd Bergmann <[email protected]> CC: Jason Gunthorpe <[email protected]> CC: Rob Herring <[email protected]> commit 07428b62addb624a3b51b6e8a213fec9b97dbfd0 Author: Liviu Dudau <[email protected]> Date: Wed Sep 24 11:27:33 2014 -0600 of/pci: Add support for parsing PCI host bridge resources from DT Provide a function to parse the PCI DT ranges that can be used to create a pci_host_bridge structure together with its associated bus. Signed-off-by: Liviu Dudau <[email protected]> [make io_base parameter optional] Signed-off-by: Robert Richter <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> CC: Arnd Bergmann <[email protected]> CC: Grant Likely <[email protected]> CC: Rob Herring <[email protected]> CC: Catalin Marinas <[email protected]> commit 9eca80461a45177e456219a9cd944c27675d6512 Author: Tejun Heo <[email protected]> Date: Wed Sep 24 13:07:33 2014 -0400 Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe" This reverts commit 0a30288da1aec914e158c2d7a3482a85f632750f, which was a temporary fix for SCSI blk-mq stall issue. The following patches will fix the issue properly by introducing atomic mode to percpu_ref. Signed-off-by: Tejun Heo <[email protected]> Cc: Kent Overstreet <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Christoph Hellwig <[email protected]> commit 83417b202bf5aa2cd82637aa81aa9f065cfe5f21 Author: Wolfram Sang <[email protected]> Date: Mon Sep 22 19:41:00 2014 +0200 i2c: move acpi code back into the core Commit 5d98e61d337c ("I2C/ACPI: Add i2c ACPI operation region support") renamed the i2c-core module. This may cause regressions for distributions, so put the ACPI code back into the core. Reported-by: Jean Delvare <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: Mika Westerberg <[email protected]> Cc: Lan Tianyu <[email protected]> commit 964356938fcd3c0001a786f55b9f0a0fbe47656a Author: Andreas Werner <[email protected]> Date: Wed Aug 27 19:53:06 2014 +0200 hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver Added driver to support the 14F021P00 BMC Hardware Monitoring. The BMC is a Board Management Controller including monitoring of the board voltages. Signed-off-by: Andreas Werner <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit 38433639af915deeb0b0e28462dd740ce57b72fd Author: Andreas Werner <[email protected]> Date: Wed Aug 27 19:52:36 2014 +0200 leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driver Added driver to support the 14F021P00 BMC LEDs. The BMC is a Board Management Controller including four LEDs which can be switched on and off. Signed-off-by: Andreas Werner <[email protected]> Acked-by: Bryan Wu <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit 5033263992eece84e19946d2cab940c86ec862ba Author: Andreas Werner <[email protected]> Date: Wed Aug 27 19:52:06 2014 +0200 watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver Added driver to support the 14F021P00 BMC Watchdog. The BMC is a Board Management Controller including watchdog functionality. Signed-off-by: Andreas Werner <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit d6cc1f5824cbca392d099f3bb0c441efd9e54de9 Author: Krzysztof Kozlowski <[email protected]> Date: Fri Sep 12 08:54:00 2014 +0200 Documentation: charger: max14577: Document exported sysfs entry Document the 'fast charge timer' setting exported by max14577 driver through sysfs entry. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Andrew Morton <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit 8d70d68d7a1b3082ca5a3808be18103a83ae348d Author: Krzysztof Kozlowski <[email protected]> Date: Fri Sep 12 08:53:59 2014 +0200 devicetree: mfd: max14577: Add device tree bindings document Add document describing device tree bindings for MAX14577 MFD drivers: MFD core, extcon, regulator and charger. Both MAX14577 and MAX77836 chipsets are documented. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Acked-by: Andrew Morton <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit 2c33e9296202cd11bf2e2f801b69ffba0953748a Author: Krzysztof Kozlowski <[email protected]> Date: Fri Sep 12 08:53:58 2014 +0200 power: max17040: Add ID for MAX77836 Fuel Gauge block MAX77836 has the same Fuel Gauge as MAX17040/17048. The max17040 driver can be safely re-used. The patch adds MAX77836 device to the array of i2c_device_id. Additionally it removes the id associated with MAX17040 device as the value is not used. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Andrew Morton <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit e30110e9c96f48aea01abc3e6dfadb369cbafec3 Author: Krzysztof Kozlowski <[email protected]> Date: Fri Sep 12 08:53:57 2014 +0200 charger: max14577: Configure battery-dependent settings from DTS and sysfs Remove hard-coded values for: - Fast Charge current, - End Of Charge current, - Fast Charge timer, - Overvoltage Protection Threshold, - Battery Constant Voltage, and use DTS or sysfs to configure them. This allows using the max14577 charger driver with different batteries. Now the charger driver requires valid configuration data from DTS. In case of wrong configuration data it fails during probe. The fast charge timer is configured through sysfs entry. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Andrew Morton <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit b8f139f68f2099b7f8b4ef470a1e53210e3aa025 Author: Krzysztof Kozlowski <[email protected]> Date: Fri Sep 12 08:53:56 2014 +0200 regulator/mfd: max14577: Export symbols for calculating charger current This patch prepares for changing the max14577 charger driver to allow configuring battery-dependent settings from DTS. The patch moves from regulator driver to MFD core driver and exports: - function for calculating register value for charger's current; - table of limits for chargers (MAX14577, MAX77836). Previously they were used only by the max14577 regulator driver. In next patch the charger driver will use them as well. Exporting them will reduce unnecessary code duplication. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Andrew Morton <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit 3682a8ee87f9107253e51733f42da10160ce41e3 Author: Krzysztof Kozlowski <[email protected]> Date: Fri Sep 12 08:53:55 2014 +0200 charger: max14577: Add support for MAX77836 charger Add support for MAX77836 charger to the max14577 driver. The MAX77836 charger is almost the same as 14577 model except: - No dead-battery detection; - Support for special charger (like in MAX77693); - Support for DX over-voltage protection (like in MAX77693); - Lower values of charging current (two times lower current for slow/fast charge, much lower EOC current); - Slightly different values in ChgTyp field of STATUS2 register. On MAX14577 0x6 is reserved and 0x7 dead battery. On the MAX77836 the 0x6 means special charger and 0x7 is reserved. Regardless of these differences the driver maps them to one enum max14577_muic_charger_type. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Andrew Morton <[email protected]> Signed-off-by: Lee Jones <[email protected]> commit 2f4096e311ef0922c42cbf7bc5df44efb3aff716 Author: Quentin Lambert <[email protected]> Date: Sun Sep 7 20:04:28 2014 +0200 PCI: Remove assignment from complicated "if" conditions The modifications effectively change the value of len_tmp in the case where the first condition is not met. Signed-off-by: Quentin Lambert <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 79e50e72986c9fcb06d707ce587cfd24fefa33e3 Author: Quentin Lambert <[email protected]> Date: Sun Sep 7 20:03:32 2014 +0200 PCI: Remove assignment from "if" conditions The following Coccinelle semantic patch was used to find and correct cases of assignments in "if" conditions: @@ expression var, expr; statement S; @@ + var = expr; if( - (var = expr) + var ) S Signed-off-by: Quentin Lambert <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 656f978f9af9d8d77436e8159f51f7aa1e673309 Author: Quentin Lambert <[email protected]> Date: Sun Sep 7 20:02:47 2014 +0200 PCI: Remove unnecessary curly braces Remove curly braces in simple "if" cases. No functional change. Signed-off-by: Quentin Lambert <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit e0c524049f8279d00d2fbd4748b03234a2726fdd Author: Santosh Shilimkar <[email protected]> Date: Thu Jul 10 11:30:08 2014 -0400 MAINTAINERS: Add Keystone Multicore Navigator drivers entry Signed-off-by: Santosh Shilimkar <[email protected]> commit 88139ed030583557751e279968e13e892ae10825 Author: Santosh Shilimkar <[email protected]> Date: Sun Mar 30 17:29:04 2014 -0400 soc: ti: add Keystone Navigator DMA support The Keystone Navigator DMA driver sets up the dma channels and flows for the QMSS(Queue Manager SubSystem) who triggers the actual data movements across clients using destination queues. Every client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO) and CRYPTO Engines has its own instance of packet dma hardware. QMSS has also an internal packet DMA module which is used as an infrastructure DMA with zero copy. Initially this driver was proposed as DMA engine driver but since the hardware is not typical DMA engine and hence doesn't comply with typical DMA engine driver needs, that approach was naked. Link to that discussion - https://lkml.org/lkml/2014/3/18/340 As aligned, now we pair the Navigator DMA with its companion Navigator QMSS subsystem driver. Cc: Greg Kroah-Hartman <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Olof Johansson <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Grant Likely <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Signed-off-by: Sandeep Nair <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> commit 8172296d8717be1951da4bb4feb2700a60e8cdde Author: Santosh Shilimkar <[email protected]> Date: Sun Mar 30 17:29:04 2014 -0400 Documentation: dt: soc: add Keystone Navigator DMA bindings The Keystone Navigator DMA driver sets up the dma channels and flows for the QMSS(Queue Manager SubSystem) who triggers the actual data movements across clients using destination queues. Every client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO) and CRYPTO Engines has its own instance of packet dma hardware. QMSS has also an internal packet DMA module which is used as an infrastructure DMA with zero copy. Initially this driver was proposed as DMA engine driver but since the hardware is not typical DMA engine and hence doesn't comply with typical DMA engine driver needs, that approach was naked. Link to that discussion - https://lkml.org/lkml/2014/3/18/340 As aligned, now we pair the Navigator DMA with its companion Navigator QMSS subsystem driver. Cc: Greg Kroah-Hartman <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Olof Johansson <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Grant Likely <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Signed-off-by: Sandeep Nair <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> commit 41f93af900a20d1a0a358b522b5129c89677e9dc Author: Sandeep Nair <[email protected]> Date: Fri Feb 28 10:47:50 2014 -0500 soc: ti: add Keystone Navigator QMSS driver The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of the main hardware sub system which forms the backbone of the Keystone Multi-core Navigator. QMSS consist of queue managers, packed-data structure processors(PDSP), linking RAM, descriptor pools and infrastructure Packet DMA. The Queue Manager is a hardware module that is responsible for accelerating management of the packet queues. Packets are queued/de-queued by writing or reading descriptor address to a particular memory mapped location. The PDSPs perform QMSS related functions like accumulation, QoS, or event management. Linking RAM registers are used to link the descriptors which are stored in descriptor RAM. Descriptor RAM is configurable as internal or external memory. The QMSS driver manages the PDSP setups, linking RAM regions, queue pool management (allocation, push, pop and notify) and descriptor pool management. The specifics on the device tree bindings for QMSS can be found in: Documentation/devicetree/bindings/soc/keystone-navigator-qmss.txt Cc: Greg Kroah-Hartman <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Olof Johansson <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Grant Likely <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Signed-off-by: Sandeep Nair <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> commit a4dfb8c41043dd6c2b9defbe846c44389c4b6f02 Author: Sandeep Nair <[email protected]> Date: Fri Feb 28 10:47:50 2014 -0500 Documentation: dt: soc: add Keystone Navigator QMSS bindings The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of the main hardware sub system which forms the backbone of the Keystone Multi-core Navigator. QMSS consist of queue managers, packed-data structure processors(PDSP), linking RAM, descriptor pools and infrastructure Packet DMA. The Queue Manager is a hardware module that is responsible for accelerating management of the packet queues. Packets are queued/de-queued by writing or reading descriptor address to a particular memory mapped location. The PDSPs perform QMSS related functions like accumulation, QoS, or event management. Linking RAM registers are used to link the descriptors which are stored in descriptor RAM. Descriptor RAM is configurable as internal or external memory. Cc: Greg Kroah-Hartman <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Olof Johansson <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Grant Likely <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Signed-off-by: Sandeep Nair <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> commit 382a9c9adc1cd540f5b714b65db315fc1c0b553d Author: Quentin Lambert <[email protected]> Date: Sun Sep 7 20:02:04 2014 +0200 PCI: Add space before open parenthesis Add space before open parenthesis as is conventional. No functional change. [bhelgaas: fix a few more in ibmphp, shpchp] Signed-off-by: Quentin Lambert <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit fe6ce32189136370b3d236d1c32ab812b93cd0d8 Author: Yijing Wang <[email protected]> Date: Wed Sep 24 11:09:59 2014 +0800 PCI/MSI: Rename __read_msi_msg() to read_msi_msg() Rename __read_msi_msg() to read_msi_msg(). No functional change. Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit c2eb2dc3461e522d6452e1f74e36194633d4db0d Author: Yijing Wang <[email protected]> Date: Wed Sep 24 11:09:53 2014 +0800 PCI/MSI: Remove unused read_msi_msg() Now no one uses read_msi_msg(), so remove it. No functional change. Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 11c013fd8afbc7c6b2e15608ed5fc2c249552998 Author: Yijing Wang <[email protected]> Date: Wed Sep 24 11:09:45 2014 +0800 MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() rtas_setup_msi_irqs() already has the struct msi_desc pointer required by __read_msi_msg(), so call it directly instead of having read_msi_msg() look it up from the IRQ. No functional change. [bhelgaas: changelog] Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Michael Ellerman <[email protected]> CC: Benjamin Herrenschmidt <[email protected]> CC: [email protected] commit eeeda4cd06e828b331b15741a204ff9f5874d28d Author: Ben Hutchings <[email protected]> Date: Wed Sep 24 13:30:12 2014 +0100 x86/relocs: Make per_cpu_load_addr static per_cpu_load_addr is only used for 64-bit relocations, but is declared in both configurations of relocs.c - with different types. This has undefined behaviour in general. GNU ld is documented to use the larger size in this case, but other tools may differ and some warn about this. References: https://bugs.debian.org/748577 Reported-by: Michael Tautschnig <[email protected]> Signed-off-by: Ben Hutchings <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> commit 212be3b2320bcf33eff648bc4e1f0edbf4d90acf Author: Oleg Nesterov <[email protected]> Date: Sun Sep 21 20:42:32 2014 +0200 x86/lib/Makefile: Remove the unnecessary "+= thunk_64.o" Trivial. We have "lib-y += thunk_$(BITS).o" at the start, no need to add thunk_64.o if !CONFIG_X86_32. Signed-off-by: Oleg Nesterov <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Linus Torvalds <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> commit 0ad6e3c5199be12c9745da8f8b9e3c9f8066c235 Author: Oleg Nesterov <[email protected]> Date: Sun Sep 21 20:41:53 2014 +0200 x86: Speed up ___preempt_schedule*() by using THUNK helpers ___preempt_schedule() does SAVE_ALL/RESTORE_ALL but this is suboptimal, we do not need to save/restore the callee-saved register. And we already have arch/x86/lib/thunk_*.S which implements the similar asm wrappers, so it makes sense to redefine ___preempt_schedule() as "THUNK ..." and remove preempt.S altogether. Signed-off-by: Oleg Nesterov <[email protected]> Reviewed-by: Andy Lutomirski <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Linus Torvalds <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> commit 03bd4e1f7265548832a76e7919a81f3137c44fd1 Author: Wanpeng Li <[email protected]> Date: Wed Sep 24 16:38:05 2014 +0800 sched: Fix unreleased llc_shared_mask bit during CPU hotplug The following bug can be triggered by hot adding and removing a large number of xen domain0's vcpus repeatedly: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group PGD 5a9d5067 PUD 13067 PMD 0 Oops: 0000 [#3] SMP [...] Call Trace: load_balance ? _raw_spin_unlock_irqrestore idle_balance __schedule schedule schedule_timeout ? lock_timer_base schedule_timeout_uninterruptible msleep lock_device_hotplug_sysfs online_store dev_attr_store sysfs_write_file vfs_write SyS_write system_call_fastpath Last level cache shared mask is built during CPU up and the build_sched_domain() routine takes advantage of it to setup the sched domain CPU topology. However, llc_shared_mask is not released during CPU disable, which leads to an invalid sched domainCPU topology. This patch fix it by releasing the llc_shared_mask correctly during CPU disable. Yasuaki also reported that this can happen on real hardware: https://lkml.org/lkml/2014/7/22/1018 His case is here: == Here is an example on my system. My system has 4 sockets and each socket has 15 cores and HT is enabled. In this case, each core of sockes is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-44, 90-104 Socket#3 | 45-59, 105-119 Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-44 and 90-104. When hot-removing socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30 remains having 0x3fff80000001fffc0000000. After that, when hot-adding socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-59 Socket#3 | 90-119 Then llc_shared_mask of CPU#30 becomes 0x3fff8000fffffffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-59 and 90-104. So the mask has the wrong value. Signed-off-by: Wanpeng Li <[email protected]> Tested-by: Linn Crosetto <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Reviewed-by: Toshi Kani <[email protected]> Reviewed-by: Yasuaki Ishimatsu <[email protected]> Cc: <[email protected]> Cc: David Rientjes <[email protected]> Cc: Prarit Bhargava <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> commit 24832b4de315ad00e5430a53772750dfcf18514d Author: Minghuan Lian <[email protected]> Date: Tue Sep 23 22:28:59 2014 +0800 PCI: designware: Add get_msi_data() to pcie_host_ops Add a struct pcie_host_ops .get_msi_data() method for platforms to return their special MSI message data. Signed-off-by: Minghuan Lian <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Mohit KUMAR <[email protected]> commit ee1b5b165c0a2f04d2107e634e51f05d0eb107de Author: Bryan O'Donoghue <[email protected]> Date: Wed Sep 24 00:26:24 2014 +0100 x86/intel/quark: Switch off CR4.PGE so TLB flush uses CR3 instead Quark x1000 advertises PGE via the standard CPUID method PGE bits exist in Quark X1000's PTEs. In order to flush an individual PTE it is necessary to reload CR3 irrespective of the PTE.PGE bit. See Quark Core_DevMan_001.pdf section 6.4.11 This bug was fixed in Galileo kernels, unfixed vanilla kernels are expected to crash and burn on this platform. Signed-off-by: Bryan O'Donoghue <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> commit 450e344e421b9f555261a2d97952d9e71d4cb082 Author: Minghuan Lian <[email protected]> Date: Tue Sep 23 22:28:58 2014 +0800 PCI: designware: Rename get_msi_data() to get_msi_addr() The struct pcie_host_ops .get_msi_data() method returns the MSI message address. To accurately express its purpose, rename it to .get_msi_addr(). Signed-off-by: Minghuan Lian <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Mohit KUMAR <[email protected]> commit 0c61ea77cceafd1134225099961c2df0866b500f Author: Minghuan Lian <Minghuan.Lian@fre…

GIT 6fe676b243e5a0cb4cc4d9a4b094de8db0cdbf74 commit e500f488c27659bb6f5d313b336621f3daa67701 Author: Fabian Frederick <[email protected]> Date: Wed Oct 1 06:52:06 2014 +0200 net/dccp/ccid.c: add __init to ccid_activate ccid_activate is only called by __init ccid_initialize_builtins in same module. Signed-off-by: Fabian Frederick <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 0c5b8a46294d43fc63788839d3c18de0961ec1bc Author: Fabian Frederick <[email protected]> Date: Wed Oct 1 06:48:03 2014 +0200 net/dccp/proto.c: add __init to dccp_mib_init dccp_mib_init is only called by __init dccp_init in same module. Signed-off-by: Fabian Frederick <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 082f58ac4a48d3f5cb4597232cb2ac6823a96f43 Author: Quinn Tran <[email protected]> Date: Thu Sep 25 06:22:28 2014 -0400 target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE During temporary resource starvation at lower transport layer, command is placed on queue full retry path, which expose this problem. The TCM queue full handling of SCF_TRANSPORT_TASK_SENSE currently sends the same cmd twice to lower layer. The 1st time led to cmd normal free path. The 2nd time cause Null pointer access. This regression bug was originally introduced v3.1-rc code in the following commit: commit e057f53308a5f071556ee80586b99ee755bf07f5 Author: Christoph Hellwig <[email protected]> Date: Mon Oct 17 13:56:41 2011 -0400 target: remove the transport_qf_callback se_cmd callback Signed-off-by: Quinn Tran <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Cc: <[email protected]> # v3.1+ Signed-off-by: Nicholas Bellinger <[email protected]> commit db3a99b9921f27fe71ca8c0f218ee810e0e7fb69 Author: Joern Engel <[email protected]> Date: Tue Sep 16 16:23:19 2014 -0400 qla_target: rearrange struct qla_tgt_prm On most (non-x86) 64bit platforms this will remove 8 padding bytes from the structure. Signed-off-by: Joern Engel <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit f9b6721a9cef94908467abf7a2cacbd15a7d23cb Author: Joern Engel <[email protected]> Date: Tue Sep 16 16:23:18 2014 -0400 qla_target: improve qlt_unmap_sg() Remove the inline attribute. Modern compilers ignore it and the function has grown beyond where inline made sense anyway. Remove the BUG_ON(!cmd->sg_mapped), and instead return if sg_mapped is not set. Every caller is doing this check, so we might as well have it in one place instead of four. Signed-off-by: Joern Engel <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit 55a9066fffd2f533e7ed434b072469ef09d6c476 Author: Joern Engel <[email protected]> Date: Tue Sep 16 16:23:15 2014 -0400 qla_target: make some global functions static Also removes the declarations from the header - including two declarations without function definitions or callers. Signed-off-by: Joern Engel <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit c57010420654aca179c500f61e86315a337244ca Author: Joern Engel <[email protected]> Date: Tue Sep 16 16:23:14 2014 -0400 qla_target: remove unused parameter Signed-off-by: Joern Engel <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit f81ccb489a7a641c1bed41b49cf8d72c199c68d5 Author: Joern Engel <[email protected]> Date: Tue Sep 16 16:23:13 2014 -0400 target: simplify core_tmr_abort_task list_for_each_entry_safe is necessary if list objects are deleted from the list while traversing it. Not the case here, so we can use the base list_for_each_entry variant. Signed-off-by: Joern Engel <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit 33940d09937276cd3c81f2874faf43e37c2db0e2 Author: Joern Engel <[email protected]> Date: Tue Sep 16 16:23:12 2014 -0400 target: encapsulate smp_mb__after_atomic() The target code has a rather generous helping of smp_mb__after_atomic() throughout the code base. Most atomic operations were followed by one and none were preceded by smp_mb__before_atomic(), nor accompanied by a comment explaining the need for a barrier. Instead of trying to prove for every case whether or not it is needed, this patch introduces atomic_inc_mb() and atomic_dec_mb(), which explicitly include the memory barriers before and after the atomic operation. For now they are defined in a target header, although they could be of general use. Most of the existing atomic/mb combinations were replaced by the new helpers. In a few cases the atomic was sandwiched in spin_lock/spin_unlock and I simply removed the barrier. I suspect that in most cases the correct conversion would have been to drop the barrier. I also suspect that a few cases exist where a) the barrier was necessary and b) a second barrier before the atomic would have been necessary and got added by this patch. Signed-off-by: Joern Engel <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit 74ed7e62289dc6d388996d7c8f89c2e7e95b9657 Author: Joern Engel <[email protected]> Date: Tue Sep 16 16:23:11 2014 -0400 target: remove some smp_mb__after_atomic()s atomic_inc_return() already does an implicit memory barrier and the second case was moved from an atomic to a plain flag operation. If a barrier were needed in the second case, it would have to be smp_mb(), not a variant optimized away for x86 and other architectures. Signed-off-by: Joern Engel <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit 8f83269048628d7b139dacbfc6cc97befcbdd2e9 Author: Joern Engel <[email protected]> Date: Tue Sep 16 16:23:10 2014 -0400 target: simplify core_tmr_release_req() And while at it, do minimal coding style fixes in the area. Signed-off-by: Joern Engel <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit 9c7d6154bc4b9dfefd580490cdca5f7c72321464 Author: Andy Grover <[email protected]> Date: Mon Jun 30 16:39:46 2014 -0700 target: Remove core_tpg_release_virtual_lun0 function Simple and just called from one place. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Andy Grover <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit cd9d7cbaec8b622eee4edcd8bf481c4047f74915 Author: Andy Grover <[email protected]> Date: Mon Jun 30 16:39:44 2014 -0700 target: Change core_dev_del_lun to take a se_lun instead of unpacked_lun Remove core_tpg_pre_dellun entirely, since we don't need to get/check a pointer we already have. Nothing else can return an error, so core_dev_del_lun can return void. Rename core_tpg_post_dellun to remove_lun - a clearer name, now that pre_dellun is gone. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Andy Grover <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit cc83881f2c57caaf4b14adaffa65595640a59661 Author: Andy Grover <[email protected]> Date: Mon Jun 30 16:39:43 2014 -0700 target: core_tpg_post_dellun can return void Nothing in it can raise an error. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Andy Grover <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> commit 49be17235c0acd96f2ff0fe282867fe3a83f554c Author: hayeswang <[email protected]> Date: Wed Oct 1 13:25:11 2014 +0800 r8152: disable power cut for RTL8153 The firmware would be clear when the power cut is enabled for RTL8153. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 204c8704128943bf3f8b605f4b40bdc2b6bd89dc Author: hayeswang <[email protected]> Date: Wed Oct 1 13:25:10 2014 +0800 r8152: remove clearing bp The xxx_clear_bp() is used to halt the firmware. It only necessary for updating the new firmware. Besides, depend on the version of the current firmware, it may have problem to halt the firmware directly. Finally, halt the firmware would let the firmware code useless, and the bugs which are fixed by the firmware would occur. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit aa55c8e2f7a395dfc9e67fc6637321e19ce9bfe1 Author: Masahiro Yamada <[email protected]> Date: Tue Sep 9 20:02:24 2014 +0900 kbuild: handle C=... and M=... after entering into build directory This commit avoids processing C=... and M=... twice when O=... is also given. Besides, we can also remove KBUILD_EXTMOD="$(KBUILD_EXTMOD)" in the sub-make target. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Peter Foley <[email protected]> Signed-off-by: Michal Marek <[email protected]> commit 745a254322c898dadf019342cd7140f7867d2d0f Author: Masahiro Yamada <[email protected]> Date: Tue Sep 9 20:02:23 2014 +0900 kbuild: use $(Q) for sub-make target Since commit 066b7ed9558087a7957a1128f27d7a3462ff117f (kbuild: Do not print the build directory with make -s), "Q" is defined above the sub-make target. This commit takes advantage of that and replaces "$(if $(KBUILD_VERBOSE:1=),@)" with "$(Q)". Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Peter Foley <[email protected]> Signed-off-by: Michal Marek <[email protected]> commit 7ff525712acf9325e9acdb27bbc93049ea2e850c Author: Masahiro Yamada <[email protected]> Date: Tue Sep 9 20:02:22 2014 +0900 kbuild: fake the "Entering directory ..." message more simply Commit c2e28dc975ea87feed84415006ae143424912ac7 (kbuild: Print the name of the build directory) added a gimmick to show the "Entering directory ...". Instead of echoing the hard-coded message (that is, we need to know the exact message), moving --no-print-directory would be easier. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Peter Foley <[email protected]> Signed-off-by: Michal Marek <[email protected]> commit 1b0ecb28b0cc216535ce6477d39aa610c3ff68a1 Author: Vlad Yasevich <[email protected]> Date: Tue Sep 30 19:39:37 2014 -0400 bnx2: Correctly receive full sized 802.1ad fragmes This driver, similar to tg3, has a check that will cause full sized 802.1ad frames to be dropped. The frame will be larger then the standard mtu due to the presense of vlan header that has not been stripped. The driver should not drop this frame and should process it just like it does for 802.1q. CC: Sony Chacko <[email protected]> CC: [email protected] Signed-off-by: Vladislav Yasevich <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 7d3083ee36b51e425b6abd76778a2046906b0fd3 Author: Vlad Yasevich <[email protected]> Date: Tue Sep 30 19:39:36 2014 -0400 tg3: Allow for recieve of full-size 8021AD frames When receiving a vlan-tagged frame that still contains a vlan header, the length of the packet will be greater then MTU+ETH_HLEN since it will account of the extra vlan header. TG3 checks this for the case for 802.1Q, but not for 802.1ad. As a result, full sized 802.1ad frames get dropped by the card. Add a check for 802.1ad protocol when receving full sized frames. Suggested-by: Prashant Sreedharan <[email protected]> CC: Prashant Sreedharan <[email protected]> CC: Michael Chan <[email protected]> Signed-off-by: Vladislav Yasevich <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 1e918876853aa85435e0f17fd8b4a92dcfff53d6 Author: Florian Westphal <[email protected]> Date: Wed Oct 1 13:38:03 2014 +0200 r8169: add support for Byte Queue Limits tested on RTL8168d/8111d model using 'super_netperf 40' with TCP/UDP_STREAM. Output of while true; do for n in inflight limit; do echo -n $n\ ; cat $n; done; sleep 1; done during netperf run, 100mbit peer: inflight 0 limit 3028 inflight 6056 limit 4542 [ trimmed output for brevity, no limit/inflight changes during test steady-state ] limit 4542 inflight 3028 limit 6122 inflight 0 limit 6122 [ changed cable to 1gbit peer, restart netperf ] inflight 37850 limit 36336 inflight 33308 limit 31794 inflight 33308 limit 31794 inflight 27252 limit 25738 [ again, no changes during test ] inflight 27252 limit 25738 inflight 0 limit 28766 [ change cable to 100mbit peer, restart netperf ] limit 28766 inflight 27370 limit 28766 inflight 4542 limit 5990 inflight 6056 limit 4542 [ .. ] inflight 6056 limit 4542 inflight 0 [end of test] Cc: Francois Romieu <[email protected]> Cc: Hayes Wang <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Acked-by: Eric Dumazet <[email protected]> Acked-by: Tom Herbert <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit d0bf4a9e92b9a93ffeeacbd7b6cb83e0ee3dc2ef Author: Eric Dumazet <[email protected]> Date: Mon Sep 29 13:29:15 2014 -0700 net: cleanup and document skb fclone layout Lets use a proper structure to clearly document and implement skb fast clones. Then, we might experiment more easily alternative layouts. This patch adds a new skb_fclone_busy() helper, used by tcp and xfrm, to stop leaking of implementation details. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 0f1ca65ee50df042051e8fa3a14f73b0c71d45b9 Author: Arianna Avanzini <[email protected]> Date: Fri Aug 22 13:20:02 2014 +0200 xen, blkfront: factor out flush-related checks from do_blkif_request() This commit factors out some checks related to the request insertion path, which can be done in an function instead of by itself. Reviewed-by: David Vrabel <[email protected]> Signed-off-by: Arianna Avanzini <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> commit 61cecca865280bef4f8a9748d0a9afa5df351ac2 Author: Roger Pau Monné <[email protected]> Date: Mon Sep 15 11:55:27 2014 +0200 xen-blkback: fix leak on grant map error path Fix leaking a page when a grant mapping has failed. CC: [email protected] Signed-off-by: Roger Pau Monné <[email protected]> Reported-and-Tested-by: Tao Chen <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> commit 12ea729645ace01e08f9654df155622898d3aae6 Author: Vitaly Kuznetsov <[email protected]> Date: Mon Sep 8 15:21:33 2014 +0200 xen/blkback: unmap all persistent grants when frontend gets disconnected blkback does not unmap persistent grants when frontend goes to Closed state (e.g. when blkfront module is being removed). This leads to the following in guest's dmesg: [ 343.243825] xen:grant_table: WARNING: g.e. 0x445 still in use! [ 343.243825] xen:grant_table: WARNING: g.e. 0x42a still in use! ... When load module -> use device -> unload module sequence is performed multiple times it is possible to hit BUG() condition in blkfront module: [ 343.243825] kernel BUG at drivers/block/xen-blkfront.c:954! [ 343.243825] invalid opcode: 0000 [#1] SMP [ 343.243825] Modules linked in: xen_blkfront(-) ata_generic pata_acpi [last unloaded: xen_blkfront] ... [ 343.243825] Call Trace: [ 343.243825] [<ffffffff814111ef>] ? unregister_xenbus_watch+0x16f/0x1e0 [ 343.243825] [<ffffffffa0016fbf>] blkfront_remove+0x3f/0x140 [xen_blkfront] ... [ 343.243825] RIP [<ffffffffa0016aae>] blkif_free+0x34e/0x360 [xen_blkfront] [ 343.243825] RSP <ffff88001eb8fdc0> We don't need to keep these grants if we're disconnecting as frontend might already forgot about them. Solve the issue by moving xen_blkbk_free_caches() call from xen_blkif_free() to xen_blkif_disconnect(). Now we can see the following: [ 928.590893] xen:grant_table: WARNING: g.e. 0x587 still in use! [ 928.591861] xen:grant_table: WARNING: g.e. 0x372 still in use! ... [ 929.592146] xen:grant_table: freeing g.e. 0x587 [ 929.597174] xen:grant_table: freeing g.e. 0x372 ... Backend does not keep persistent grants any more, reconnect works fine. CC: [email protected] Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> commit b248230c34970a6c1c17c591d63b464e8d2cfc33 Author: Yuchung Cheng <[email protected]> Date: Mon Sep 29 13:20:38 2014 -0700 tcp: abort orphan sockets stalling on zero window probes Currently we have two different policies for orphan sockets that repeatedly stall on zero window ACKs. If a socket gets a zero window ACK when it is transmitting data, the RTO is used to probe the window. The socket is aborted after roughly tcp_orphan_retries() retries (as in tcp_write_timeout()). But if the socket was idle when it received the zero window ACK, and later wants to send more data, we use the probe timer to probe the window. If the receiver always returns zero window ACKs, icsk_probes keeps getting reset in tcp_ack() and the orphan socket can stall forever until the system reaches the orphan limit (as commented in tcp_probe_timer()). This opens up a simple attack to create lots of hanging orphan sockets to burn the memory and the CPU, as demonstrated in the recent netdev post "TCP connection will hang in FIN_WAIT1 after closing if zero window is advertised." http://www.spinics.net/lists/netdev/msg296539.html This patch follows the design in RTO-based probe: we abort an orphan socket stalling on zero window when the probe timer reaches both the maximum backoff and the maximum RTO. For example, an 100ms RTT connection will timeout after roughly 153 seconds (0.3 + 0.6 + .... + 76.8) if the receiver keeps the window shut. If the orphan socket passes this check, but the system already has too many orphans (as in tcp_out_of_resources()), we still abort it but we'll also send an RST packet as the connection may still be active. In addition, we change TCP_USER_TIMEOUT to cover (life or dead) sockets stalled on zero-window probes. This changes the semantics of TCP_USER_TIMEOUT slightly because it previously only applies when the socket has pending transmission. Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Reported-by: Andrey Dmitrov <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 3edfe0030bb7a82dab2a30a29ea6e1800e600c4b Author: Helge Deller <[email protected]> Date: Wed Oct 1 22:11:01 2014 +0200 parisc: Fix serial console for machines with serial port on superio chip Fix the serial console on machines where the serial port is located on the SuperIO chip. Signed-off-by: Helge Deller <[email protected]> Cc: Peter Hurley <[email protected]> commit baf378126b08474de2e2428b16e62a69df0339d9 Author: Michael Opdenacker <[email protected]> Date: Wed Oct 1 14:07:39 2014 -0600 rsxx: Remove deprecated IRQF_DISABLED This removes the use of the IRQF_DISABLED flag from drivers/block/rsxx/core.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <[email protected]> Acked-by Philip Kelleher <[email protected]> Signed-off-by: Jens Axboe <[email protected]> commit cb57659a15c6c0576493cc8a10474ce7ffd44eb3 Author: Fabian Frederick <[email protected]> Date: Wed Oct 1 19:30:03 2014 +0200 cipso: add __init to cipso_v4_cache_init cipso_v4_cache_init is only called by __init cipso_v4_init Signed-off-by: Fabian Frederick <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 57a02c39c1c20ed03a86f8014c11a8c18b94cac3 Author: Fabian Frederick <[email protected]> Date: Wed Oct 1 19:18:57 2014 +0200 inet: frags: add __init to ip4_frags_ctl_register ip4_frags_ctl_register is only called by __init ipfrag_init Signed-off-by: Fabian Frederick <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 47d7a88c188f06ffaea3a539f84fe10cb4e77787 Author: Fabian Frederick <[email protected]> Date: Wed Oct 1 18:27:50 2014 +0200 tcp: add __init to tcp_init_mem tcp_init_mem is only called by __init tcp_init. Signed-off-by: Fabian Frederick <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit ee7a1beb9759c94aea67dd887faf5e447a5c6710 Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:21 2014 +0800 r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled These two functions are used to inform dash firmware that driver is been brought up or brought down. So call these two functions only when hardware dash function is enabled. Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 2a9b4d9670e71784896d95c41c9b0acd50db1dbb Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:20 2014 +0800 r8169:modify the behavior of function "rtl8168_oob_notify" In function "rtl8168_oob_notify", using function "rtl_eri_write" to access eri register 0xe8, instead of using MAC register "ERIDR" and "ERIAR" to access it. For using function "rtl_eri_write" in function "rtl8168_oob_notify", need to move down "rtl8168_oob_notify" related functions under the function "rtl_eri_write". Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 2f8c040ce6791ef0477e6d59768ee3d5fd0df0fd Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:19 2014 +0800 r8169:change the name of function "r8168dp_check_dash" to "r8168_check_dash" DASH function not only RTL8168DP can support, but also RTL8168EP. So change the name of function "r8168dp_check_dash" to "r8168_check_dash". Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 706123d06c18b55da5e9da21e2d138ee789bf8f4 Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:18 2014 +0800 r8169:change the name of function"rtl_w1w0_eri" Change the name of function "rtl_w1w0_eri" to "rtl_w0w1_eri". In this function, the local variable "val" is "write zeros then write ones". Please see below code. (val & ~m) | p In this patch, change the function name from "xx_w1w0_xx" to "xx_w0w1_xx". The changed function name is more suitable for it's behavior. Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 7656442824f6174b56a19c664fe560972df56ad4 Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:17 2014 +0800 r8169:for function "rtl_w1w0_phy" change its name and behavior Change function name from "rtl_w1w0_phy" to "rtl_w0w1_phy". And its behavior from "write ones then write zeros" to "write zeros then write ones". In Realtek internal driver, bitwise operations are almost "write zeros then write ones". For easy to port hardware parameters from Realtek internal driver to Linux kernal driver "r8169", we would like to change this function's behavior and its name. Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit ac85bcdbc0ffd3903d6db4abcd769ecacf98605b Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:16 2014 +0800 r8169:add more chips to support magic packet v2 For RTL8168F RTL8168FB RTL8168G RTL8168GU RTL8411 RTL8411B RTL8402 RTL8107E, the magic packet enable bit is changed to eri 0xde bit0. In this patch, change magic packet enable bit of these chips to eri 0xde bit0. Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 89cceb2729c752e6ff9b3bc8650a70f29884f116 Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:15 2014 +0800 r8169:add support more chips to get mac address from backup mac address register RTL8168FB RTL8168G RTL8168GU RTL8411 RTL8411B RTL8106EUS RTL8402 can support get mac address from backup mac address register. Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 42fde7371035144037844f41bd16950de9912bdb Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:14 2014 +0800 r8169:add disable/enable RTL8411B pll function RTL8411B can support disable/enable pll function. Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit b8e5e6ad7115befef13a4493f1d2b8e438abc058 Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:13 2014 +0800 r8169:add disable/enable RTL8168G pll function RTL8168G also can disable/enable pll function. Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 05b9687bb3606190304f08c2e4cd63de8717e30b Author: Chun-Hao Lin <[email protected]> Date: Wed Oct 1 23:17:12 2014 +0800 r8169:change uppercase number to lowercase number Signed-off-by: Chun-Hao Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit a29c9c43bb633a9965909cd548879fee4aa789a4 Author: David L Stevens <[email protected]> Date: Wed Oct 1 11:05:27 2014 -0400 sunvnet: fix potential NULL pointer dereference One of the error cases for vnet_start_xmit()'s "out_dropped" label is port == NULL, so only mess with port->clean_timer when port is not NULL. Signed-off-by: David L Stevens <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit e506d405ac7d34d03996c97ac68aa2ac010be64a Author: Thierry Reding <[email protected]> Date: Wed Oct 1 13:59:00 2014 +0200 net: dsa: Fix build warning for !PM_SLEEP The dsa_switch_suspend() and dsa_switch_resume() functions are only used when PM_SLEEP is enabled, so they need #ifdef CONFIG_PM_SLEEP protection to avoid a compiler warning. Signed-off-by: Thierry Reding <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 84ac1f2ca41f5888cc995944c073a5220f3ed549 Author: Tanmay Inamdar <[email protected]> Date: Fri Sep 26 14:08:25 2014 -0700 arm64: dts: Add APM X-Gene PCIe device tree nodes Add the device tree nodes for APM X-Gene PCIe host controller and PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts nodes are added. Signed-off-by: Tanmay Inamdar <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 2896e4418b17363f211e084471b589e3c06a7248 Author: Bjorn Helgaas <[email protected]> Date: Wed Oct 1 13:01:35 2014 -0600 PCI: xgene: Add APM X-Gene PCIe driver Add the AppliedMicro X-Gene SOC PCIe host controller driver. The X-Gene PCIe controller supports up to 8 lanes and GEN3 speed. The X-Gene SOC supports up to 5 PCIe ports. [bhelgaas: folded in MAINTAINERS and bindings updates] Tested-by: Ming Lei <[email protected]> Tested-by: Dann Frazier <[email protected]> Signed-off-by: Tanmay Inamdar <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> (driver) commit 3c87dcbfb36ce6d3d9087f0163c02ba5690d9a85 Author: Subbaraya Sundeep Bhatta <[email protected]> Date: Wed Oct 1 11:01:17 2014 +0200 net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev Calling ether_setup is redundant since alloc_etherdev calls it. Signed-off-by: Subbaraya Sundeep Bhatta <[email protected]> Signed-off-by: Michal Simek <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 8493ecca74a7b4a66e19676de1a0f14194179941 Author: Benjamin Tissoires <[email protected]> Date: Wed Oct 1 11:59:47 2014 -0400 HID: uHID: fix excepted report type When uhid_get_report() or uhid_set_report() are called, they emit on the char device a UHID_GET_REPORT or UHID_SET_REPORT message. Then, the protocol says that the user space asnwers with UHID_GET_REPORT_REPLY or UHID_SET_REPORT_REPLY. Unfortunatelly, the current code waits for an event of type UHID_GET_REPORT or UHID_SET_REPORT instead of the reply one. Add 1 to UHID_GET_REPORT or UHID_SET_REPORT to actually wait for the reply, and validate the reply. Signed-off-by: Benjamin Tissoires <[email protected]> Reviewed-by: David Herrmann <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> commit c8df6ac9452e8f47a6f660993c526d13e858a6f3 Author: Lucas Stach <[email protected]> Date: Tue Sep 30 18:36:27 2014 +0200 PCI: designware: Remove open-coded bitmap operations Replace them by using the standard kernel bitmap ops. No functional change, but makes the code a lot cleaner. Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Pratyush Anand <[email protected]> Acked-by: Jingoo Han <[email protected]> commit 2199f0608864cf4e8c93d37842a5ee50c8d79843 Author: Mikulas Patocka <[email protected]> Date: Fri Mar 28 15:51:56 2014 -0400 dm crypt: sort writes Write requests are sorted in a red-black tree structure and are submitted in the sorted order. In theory the sorting should be performed by the underlying disk scheduler, however, in practice the disk scheduler only accepts and sorts a finite number of requests. To allow the sorting of all requests, dm-crypt needs to implement its own own sorting. The overhead associated with rbtree-based sorting is considered negligible so it is not used conditionally. Even on SSD sorting can be beneficial since in-order request dispatch promotes lower latency IO completion to the upper layers. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> commit 648fee35be4c75667aa18bf513f7e7e65c01640b Author: Mikulas Patocka <[email protected]> Date: Fri Mar 28 15:51:56 2014 -0400 dm crypt: offload writes to thread Submitting write bios directly in the encryption thread caused serious performance degradation. On a multiprocessor machine, encryption requests finish in a different order than they were submitted. Consequently, write requests would be submitted in a different order and it could cause severe performance degradation. Move the submission of write requests to a separate thread so that the requests can be sorted before submitting. But this commit improves dm-crypt performance even without having dm-crypt perform request sorting (in particular it enables IO schedulers like CFQ to sort more effectively). Note: it is required that a previous commit ("dm crypt: don't allocate pages for a partial request") be applied before applying this patch. Otherwise, this commit could introduce a crash. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> commit 4a0d7e0464226eee625a5b77484c339334453882 Author: Mikulas Patocka <[email protected]> Date: Fri Mar 28 15:51:55 2014 -0400 dm crypt: use unbound workqueue for request processing Use unbound workqueue so that work is automatically balanced between available CPUs. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> commit 72bfc40ca3b393cb0bc6b5e2ce364e6c6ce0f390 Author: Mikulas Patocka <[email protected]> Date: Thu May 29 14:18:12 2014 -0400 dm crypt: remove io_pending refcount member from dm_crypt_io Commit "dm crypt: don't allocate pages for a partial request" changed the code to allocate all pages for one request. There is always just one pending request, so the io_pending refcount may be removed. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> commit 42196fec8945cc84c032b7f59deaffee82036245 Author: Mikulas Patocka <[email protected]> Date: Fri Mar 28 15:51:56 2014 -0400 dm crypt: remove unused io_pool and _crypt_io_pool The previous commits ("dm crypt: use per-bio data") and ("dm crypt: don't allocate pages for a partial request") stopped using the io_pool slab mempool and backing _crypt_io_pool kmem cache. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> commit ebfda24b1e1bf483accdb900f8625151d8f01383 Author: Mikulas Patocka <[email protected]> Date: Fri Mar 28 15:51:56 2014 -0400 dm crypt: avoid deadlock in mempools Fix a theoretical deadlock introduced in the previous commit ("dm crypt: don't allocate pages for a partial request"). The function crypt_alloc_buffer may be called concurrently. If we allocate from the mempool concurrently, there is a possibility of deadlock. For example, if we have mempool of 256 pages, two processes, each wanting 256, pages allocate from the mempool concurrently, it may deadlock in a situation where both processes have allocated 128 pages and the mempool is exhausted. In order to avoid such a scenario, we allocate the pages under a mutex. In order to not degrade performance with excessive locking, we try non-blocking allocations without a mutex first and if it fails, we fallback to a blocking allocation with a mutex. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> commit b9ea7cb3fb237078be400522880932008c630fb7 Author: Mikulas Patocka <[email protected]> Date: Fri Mar 28 15:51:56 2014 -0400 dm crypt: don't allocate pages for a partial request Change crypt_alloc_buffer so that it only ever allocates pages for a full request. This change is a prerequisite for the commit "dm crypt: offload writes to thread". Which implies this change is effectively required for the upcoming cpu parallelization changes. But this change simplifies the dm-crypt code at the expense of reduced throughput in low memory conditions (where allocation for a partial request is most useful). This change also enables the removal of the io_pending refcount. Note: the next commit ("dm-crypt: avoid deadlock in mempools") is needed to fix a theoretical deadlock. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> commit 117cd3e12232afea97dd31489fbde8888ad22b3e Author: Heinz Mauelshagen <[email protected]> Date: Wed Sep 24 17:47:19 2014 +0200 dm raid: add discard support for RAID levels 4, 5 and 6 In case of RAID levels 4, 5 and 6 we have to verify each RAID members' ability to zero data on discards to avoid stripe data corruption -- if discard_zeroes_data is not set for each RAID member discard support must be disabled. Also add an 'ignore_discard' table argument to the target in order to ignore discard processing completely on a RAID array, hence not passing down discards to MD personalities. This 'ignore_discard' control provides the ability to: - prohibit discards in case of _potential_ data corruptions in RAID4/5/6 (e.g. if ability to zero data on discard is flawed in a RAID member) - avoid discard processing overhead Signed-off-by: Heinz Mauelshagen <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> commit 04c308f43a90a9b3b84c344b324d6af29288da05 Author: Mikulas Patocka <[email protected]> Date: Wed Oct 1 13:29:48 2014 -0400 dm bufio: when done scanning return from __scan immediately When __scan frees the required number of buffer entries that the shrinker requested (nr_to_scan becomes zero) it must return. Before this fix the __scan code exited only the inner loop and continued in the outer loop. Also, move dm_bufio_cond_resched to __scan's inner loop, so that iterating the bufio client's lru lists doesn't result in scheduling latency. Reported-by: Joe Thornber <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Cc: [email protected] # 3.2+ commit 5ec094057c7df5ff80f5e7fe282f47ad205fb976 Author: Bjorn Helgaas <[email protected]> Date: Tue Sep 23 14:38:28 2014 -0600 PCI/MSI: Remove unnecessary temporary variable The only use of "status" is to hold a value which is immediately returned, so just return and remove the variable directly. Signed-off-by: Bjorn Helgaas <[email protected]> commit 56b72b40957947f7c08771f030102351d4c906df Author: Yijing Wang <[email protected]> Date: Mon Sep 29 18:35:16 2014 -0600 PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() default_restore_msi_irq() already has the struct msi_desc pointer required by __write_msi_msg(), so call it directly instead of having write_msi_msg() look it up from the IRQ. No functional change. [bhelgaas: split into separate patch] Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 1e8f4cc82eded0c3c97ef6e2f119782e42deda35 Author: Yijing Wang <[email protected]> Date: Wed Sep 24 11:09:45 2014 +0800 MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() rtas_setup_msi_irqs() already has the struct msi_desc pointer required by __read_msi_msg(), so call it directly instead of having read_msi_msg() look it up from the IRQ. No functional change. [bhelgaas: changelog] Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Michael Ellerman <[email protected]> CC: Benjamin Herrenschmidt <[email protected]> CC: [email protected] commit 2b260085e466c345e78f23b1c9ad1d123d509ef8 Author: Yijing Wang <[email protected]> Date: Tue Sep 23 13:27:25 2014 +0800 PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() Both callers of get_cached_msi_msg() start with a struct irq_data pointer, look up the corresponding IRQ number, and pass it to get_cached_msi_msg(), which then uses irq_get_irq_data() to look up the struct irq_data again to call __get_cached_msi_msg(). Since we already have the struct irq_data, call __get_cached_msi_msg() directly and skip the lookup work done by get_cached_msi_msg(). No functional change. [bhelgaas: changelog] Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> CC: Tony Luck <[email protected]> CC: [email protected] commit 468ff15a3ab98ed7153c29c68229ffb97f15a251 Author: Yijing Wang <[email protected]> Date: Tue Sep 23 13:27:24 2014 +0800 PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints The "msi_bus" sysfs file for bridges sets a bus flag to allow or disallow future driver requests for MSI or MSI-X. Previously, the sysfs file existed for endpoints but did nothing. Add "msi_bus" support for endpoints, so an administrator can prevent the use of MSI and MSI-X for individual devices. Note that as for bridges, these changes only affect future driver requests for MSI or MSI-X, so drivers may need to be reloaded. Add documentation for the "msi_bus" sysfs file. [bhelgaas: changelog, comments, add "subordinate", add endpoint printk, rework bus_flags setting, make bus_flags printk unconditional] Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 48c3c38f003c25d50a09d3da558667c5ecd530aa Author: Yijing Wang <[email protected]> Date: Tue Sep 23 11:02:42 2014 -0600 PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib "msi_attrib.pos" is only used for MSI (not MSI-X), and we already cache the MSI capability offset in "dev->msi_cap". Remove "pos" from the struct msi_attrib and use "dev->msi_cap" directly. [bhelgaas: changelog, fix whitespace] Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 81052769e48609525c452d8f078a5786b673e178 Author: Yijing Wang <[email protected]> Date: Tue Sep 23 13:27:22 2014 +0800 PCI/MSI: Remove unused kobject from struct msi_desc After commit 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects"), the kobject in struct msi_desc is unused. Remove the unused struct kobject from struct msi_desc. [bhelgaas: changelog] Fixes: 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects") Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> commit a06cd74cefe754341f747ddc4cf7b0058fa9bff8 Author: Alexander Gordeev <[email protected]> Date: Tue Sep 23 12:45:58 2014 -0600 PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() Rename pci_msi_check_device() to pci_msi_supported() for clarity. Note that pci_msi_supported() returns true if MSI/MSI-X is supported, so code like: if (pci_msi_supported(...)) reads naturally. [bhelgaas: changelog, split to separate patch, reverse sense] Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 27e20603c54ba633ed259284d006275f13c9f95b Author: Alexander Gordeev <[email protected]> Date: Tue Sep 23 14:25:11 2014 -0600 PCI/MSI: Move D0 check into pci_msi_check_device() Both callers of pci_msi_check_device() check that the device is in D0 state, so move the check from the callers into pci_msi_check_device() itself. In pci_enable_msi_range(), note that pci_msi_check_device() never returns a positive value any more, so the loop that called it until it returns zero or negative is no longer necessary. [bhelgaas: changelog, split to separate patch] Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit ad975ebad4c3ce8dcc7d0bb4db26ea5aca4cfc99 Author: Alexander Gordeev <[email protected]> Date: Tue Sep 23 12:39:54 2014 -0600 PCI/MSI: Remove arch_msi_check_device() No architectures implement arch_msi_check_device() or the struct msi_chip .check_device() method, so remove them. Remove the "type" parameter to pci_msi_check_device() because it was only used to call arch_msi_check_device() and is no longer needed. [bhelgaas: changelog, split to separate patch] Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> commit 3930115e0dd67f61b3b1882c7a34d0baeff1bb4c Author: Alexander Gordeev <[email protected]> Date: Sun Sep 7 20:57:54 2014 +0200 irqchip: armada-370-xp: Remove arch_msi_check_device() Move MSI checks from arch_msi_check_device() to arch_setup_msi_irqs(). This makes the code more compact and allows removing arch_msi_check_device() from generic MSI code. Tested-by: Thomas Petazzoni <[email protected]> Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Jason Cooper <[email protected]> CC: Thomas Gleixner <[email protected]> commit 6b2fd7efeb888fa781c1f767de6c36497ac1596b Author: Alexander Gordeev <[email protected]> Date: Sun Sep 7 20:57:53 2014 +0200 PCI/MSI/PPC: Remove arch_msi_check_device() Move MSI checks from arch_msi_check_device() to arch_setup_msi_irqs(). This makes the code more compact and allows removing arch_msi_check_device() from generic MSI code. Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Michael Ellerman <[email protected]> commit 977104ece1568f2e2ad3f5fd8e55bd640e8ab55a Author: Mark Charlebois <[email protected]> Date: Thu Sep 4 14:16:17 2014 -0700 arm: LLVMLinux: Use global stack register variable for percpu Using global current_stack_pointer works on both clang and gcc. current_stack_pointer is an unsigned long and needs to be cast as a pointer to dereference. KernelVersion: 3.17.0-rc6 Signed-off-by: Mark Charlebois <[email protected]> Signed-off-by: Behan Webster <[email protected]> commit a35dc594542b29935cd3a92e53233ad4ba4e622f Author: Behan Webster <[email protected]> Date: Tue Sep 3 22:27:27 2013 -0400 arm: LLVMLinux: Use current_stack_pointer in unwind_backtrace Use the global current_stack_pointer to get the value of the stack pointer. This change supports being able to compile the kernel with both gcc and clang. KernelVersion: 3.17.0-rc6 Signed-off-by: Behan Webster <[email protected]> Reviewed-by: Mark Charlebois <[email protected]> Reviewed-by: Jan-Simon Möller <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Nicolas Pitre <[email protected]> commit 5c5da6724d8e1767405a3f4b611451a11ece99e2 Author: Behan Webster <[email protected]> Date: Tue Sep 3 22:27:27 2013 -0400 arm: LLVMLinux: Calculate current_thread_info from current_stack_pointer Use the global current_stack_pointer to get the value of the stack pointer. This change supports being able to compile the kernel with both gcc and clang. KernelVersion: 3.17.0-rc6 Signed-off-by: Behan Webster <[email protected]> Reviewed-by: Mark Charlebois <[email protected]> Reviewed-by: Jan-Simon Möller <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Nicolas Pitre <[email protected]> commit f2b6d8c6c56c9a164a2d885ba34a09d613c959c9 Author: Behan Webster <[email protected]> Date: Tue Sep 3 22:27:27 2013 -0400 arm: LLVMLinux: Use current_stack_pointer in save_stack_trace_tsk Use the global current_stack_pointer to get the value of the stack pointer. This change supports being able to compile the kernel with both gcc and clang. KernelVersion: 3.17.0-rc6 Signed-off-by: Behan Webster <[email protected]> Reviewed-by: Mark Charlebois <[email protected]> Reviewed-by: Jan-Simon Möller <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Nicolas Pitre <[email protected]> commit 40802b84566a3d9731a8fea43b144301d9ac450d Author: Behan Webster <[email protected]> Date: Tue Sep 3 22:27:27 2013 -0400 arm: LLVMLinux: Use current_stack_pointer for return_address Use the global current_stack_pointer to get the value of the stack pointer. This change supports being able to compile the kernel with both gcc and Clang. KernelVersion: 3.17.0-rc6 Signed-off-by: Behan Webster <[email protected]> Reviewed-by: Mark Charlebois <[email protected]> Reviewed-by: Jan-Simon Möller <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Nicolas Pitre <[email protected]> commit d80ced5236764b8c4ffda5545d5b357cf88c77c1 Author: Behan Webster <[email protected]> Date: Tue Sep 3 22:27:27 2013 -0400 arm: LLVMLinux: Use current_stack_pointer to calculate pt_regs address Use the global current_stack_pointer to calculate the end of the stack for current_pt_regs() KernelVersion: 3.17.0-rc6 Signed-off-by: Behan Webster <[email protected]> Reviewed-by: Mark Charlebois <[email protected]> Reviewed-by: Jan-Simon Möller <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Nicolas Pitre <[email protected]> commit 9d0d6994806b36891453beb1e94b6253f853af61 Author: Behan Webster <[email protected]> Date: Tue Sep 3 22:27:26 2013 -0400 arm: LLVMLinux: Add global named register current_stack_pointer for ARM Define a global named register for current_stack_pointer. The use of this new variable guarantees that both gcc and clang can access this register in C code. KernelVersion: 3.17.0-rc6 Signed-off-by: Behan Webster <[email protected]> Reviewed-by: Jan-Simon Möller <[email protected]> Reviewed-by: Mark Charlebois <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Nicolas Pitre <[email protected]> commit 2c804d0f8fc7799981d9fdd8c88653541b28c1a7 Author: Eric Dumazet <[email protected]> Date: Tue Sep 30 22:12:05 2014 -0700 ipv4: mentions skb_gro_postpull_rcsum() in inet_gro_receive() Proper CHECKSUM_COMPLETE support needs to adjust skb->csum when we remove one header. Its done using skb_gro_postpull_rcsum() In the case of IPv4, we know that the adjustment is not really needed, because the checksum over IPv4 header is 0. Lets add a comment to ease code comprehension and avoid copy/paste errors. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit eb51bbaf8dedf142a54a7ff58514a29b40d515bb Author: Stephen Rothwell <[email protected]> Date: Wed Oct 1 17:00:49 2014 +1000 fm10k: using vmalloc requires including linux/vmalloc.h Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]> commit 078efae00ffc76381c3248006e9cf0988163488f Author: Anish Bhatt <[email protected]> Date: Mon Sep 15 17:44:18 2014 -0700 [SCSI] cxgb4i: avoid holding mutex in interrupt context cxgbi_inet6addr_handler() can be called in interrupt context, so use rcu protected list while finding netdev. This is observed as a scheduling in atomic oops when running over ipv6. Fixes: fc8d0590d914 ("libcxgbi: Add ipv6 api to driver") Fixes: 759a0cc5a3e1 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api") Signed-off-by: Anish Bhatt <[email protected]> Signed-off-by: Karen Xie <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: James Bottomley <[email protected]> commit 34549ab09e62db9703811c6ed4715f2ffa1fd7fb Author: Jeff Layton <[email protected]> Date: Wed Oct 1 08:05:22 2014 -0400 nfsd: eliminate "to_delegation" define We now have cb_to_delegation and to_delegation, which do the same thing and are defined separately in different .c files. Move the cb_to_delegation definition into a header file and eliminate the redundant to_delegation definition. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Jeff Layton <[email protected]> commit 4a0efdc933680d908de11712a774a2c9492c3d5a Author: Hannes Reinecke <[email protected]> Date: Wed Oct 1 14:32:31 2014 +0200 block: misplaced rq_complete tracepoint The rq_complete tracepoint was never issued for empty requests, causing the resulting blktrace information to never show any completion for those request. Signed-off-by: Hannes Reinecke <[email protected]> Acked-by: Tejun Heo <[email protected]> Signed-off-by: Jens Axboe <[email protected]> commit fc2021fb9baf9ed375c8161b40b68e120e75c60e Author: Michael Opdenacker <[email protected]> Date: Wed Oct 1 12:07:07 2014 +0200 block: hd: remove deprecated IRQF_DISABLED This patch removes the use of the IRQF_DISABLED flag from drivers/block/hd.c It's a NOOP since 2.6.35 and it will be removed one day. This also removes a related comment which is obsolete too. Signed-off-by: Michael Opdenacker <[email protected]> Signed-off-by: Jens Axboe <[email protected]> commit 19aeb5a65f1a6504fc665466c188241e7393d66f Author: Bob Peterson <[email protected]> Date: Mon Sep 29 08:52:04 2014 -0400 GFS2: Make rename not save dirent location This patch fixes a regression in the patch "GFS2: Remember directory insert point", commit 2b47dad866d04f14c328f888ba5406057b8c7d33. The problem had to do with the rename function: The function found space for the new dirent, and remembered that location. But then the old dirent was removed, which often moved the eligible location for the renamed dirent. Putting the new dirent at the saved location caused file system corruption. This patch adds a new "save_loc" variable to struct gfs2_diradd. If 1, the dirent location is saved. If 0, the dirent location is not saved and the buffer_head is released as per previous behavior. Signed-off-by: Bob Peterson <[email protected]> Signed-off-by: Steven Whitehouse <[email protected]> commit 5235166fbc332c8b5dcf49e3a498a8b510a77449 Author: Oliver Neukum <[email protected]> Date: Tue Sep 30 12:54:56 2014 +0200 HID: usbhid: add another mouse that needs QUIRK_ALWAYS_POLL There is a second mouse sharing the same vendor strings but different IDs. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> commit 2013add4ce73c93ae2148969a9ec3ecc8b1e26fa Author: Gavin Shan <[email protected]> Date: Wed Oct 1 14:34:51 2014 +1000 powerpc/eeh: Show hex prefix for PE state sysfs As Michael suggested, the hex prefix for the output of EEH PE state sysfs entry (/sys/bus/pci/devices/xxx/eeh_pe_state) is always informative to users. Suggested-by: Michael Ellerman <[email protected]> Signed-off-by: Gavin Shan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> commit 24c20f10583647e30afe87b6f6d5e14bc7b1cbc6 Author: Christoph Hellwig <[email protected]> Date: Tue Sep 30 16:43:46 2014 +0200 scsi: add a CONFIG_SCSI_MQ_DEFAULT option Add a Kconfig option to enable the blk-mq path for SCSI by default to ease testing and deployment in setups that know they benefit from blk-mq. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Reviewed-by: Robert Elliott <[email protected]> Tested-by: Robert Elliott <[email protected]> commit e785060ea3a1c8e37a8bc1449c79e36bff2b5b13 Author: Dolev Raviv <[email protected]> Date: Thu Sep 25 15:32:36 2014 +0300 ufs: definitions for phy interface - Adding some of the definitions missing in unipro.h, including power enumeration. - Read Modify Write Line helper function - Indication for the type of suspend Signed-off-by: Dolev Raviv <[email protected]> Signed-off-by: Subhash Jadavani <[email protected]> Signed-off-by: Yaniv Gardi <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> commit 374a246e4ebda1fc55d537877bf2412e511ecc7b Author: Subhash Jadavani <[email protected]> Date: Thu Sep 25 15:32:35 2014 +0300 ufs: tune bkops while power managment events Add capability to control the auto bkops during suspend. If host explicitly enables the auto bkops (background operation) on device then only device would perform the bkops on its own. If auto bkops is not enabled explicitly and if the device reaches to state where it must do background operation, device would raise the urgent bkops exception event to host and then host will enable the auto bkops on device. This patch adds the option to choose whether auto bkops should be enabled during runtime suspend or not. Since we don't want to keep the device active to perform the non critical bkops, host will enable urgent bkops only. Keep auto-bkops enabled after resume if urgent bkops needed. If device bkops status shows that its in critical need of executing background operations, host should allow the device to continue doing background operations. Signed-off-by: Subhash Jadavani <[email protected]> Signed-off-by: Dolev Raviv <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> commit 856b348305c98d4e0c8e5eafa97c61443197f8d3 Author: Sahitya Tummala <[email protected]> Date: Thu Sep 25 15:32:34 2014 +0300 ufs: Add support for clock scaling using devfreq framework The clocks for UFS device will be managed by generic DVFS (Dynamic Voltage and Frequency Scaling) framework within kernel. This devfreq framework works with different governors to scale the clocks. By default, UFS devices uses simple_ondemand governor which scales the clocks up if the load is more than upthreshold and scales down if the load is less than downthreshold. Signed-off-by: Sahitya Tummala <[email protected]> Signed-off-by: Dolev Raviv <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> commit 4cff6d991e4a291cf50fe2659da2ea9ad46620bf Author: Sahitya Tummala <[email protected]> Date: Thu Sep 25 15:32:33 2014 +0300 ufs: Add freq-table-hz property for UFS device Add freq-table-hz propery for UFS device to keep track of <min max> frequencies supported by UFS clocks. Signed-off-by: Sahitya Tummala <[email protected]> Signed-off-by: Dolev Raviv <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> commit 1ab27c9cf8b63dd8dec9e17b5c17721c7f3b6cc7 Author: Sahitya Tummala <[email protected]> Date: Thu Sep 25 15:32:32 2014 +0300 ufs: Add support for clock gating The UFS controller clocks can be gated after certain period of inactivity, which is typically less than runtime suspend timeout. In addition to clocks the link will also be put into Hibern8 mode to save more power. The clock gating can be turned on by enabling the capability UFSHCD_CAP_CLK_GATING. To enable entering into Hibern8 mode as part of clock gating, set the capability UFSHCD_CAP_HIBERN8_WITH_CLK_GATING. The tracing events for clock gating can be enabled through debugfs as: echo 1 > /sys/kernel/debug/tracing/events/ufs/ufshcd_clk_gating/enable cat /sys/kernel/debug/tracing/trace_pipe Signed-off-by: Sahitya Tummala <[email protected]> Signed-off-by: Dolev Raviv <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> commit 7eb584db73bebbc9852a14341431ed6935419bec Author: Dolev Raviv <[email protected]> Date: Thu Sep 25 15:32:31 2014 +0300 ufs: refactor configuring power mode Sometimes, the device shall report its maximum power and speed capabilities, but we might not wish to configure it to use those maximum capabilities. This change adds support for the vendor specific host driver to implement power change notify callback. To enable configuring different power modes (number of lanes, gear number and fast/slow modes) it is necessary to split the configuration stage from the stage that reads the device max power mode. In addition, it is not required to read the configuration more than once, thus the configuration is stored after reading it once. Signed-off-by: Dolev Raviv <[email protected]> Signed-off-by: Yaniv Gardi <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> commit 57d104c153d3d6d7bea60089e80f37501851ed2c Author: Subhash Jadavani <[email protected]> Date: Thu Sep 25 15:32:30 2014 +0300 ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <[email protected]> Signed-off-by: Dolev Raviv <[email protected]> Signed-off-by: Sujit Reddy Thumma <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> commit 0ce147d48a3e3352859f0c185e98e8392bee7a25 Author: Subhash Jadavani <[email protected]> Date: Thu Sep 25 15:32:29 2014 +0300 ufs: introduce well known logical unit in ufs UFS device may have standard LUs and LUN id could be from 0x00 to 0x7F. UFS device specification use "Peripheral Device Addressing Format" (SCSI SAM-5) for standard LUs. UFS device may also have the Well Known LUs (also referred as W-LU) which again could be from 0x00 to 0x7F. For W-LUs, UFS device specification only allows the "Extended Addressing Format" (SCSI SAM-5) which means the W-LUNs would start from 0xC100 onwards. This means max. LUN number reported from UFS device could be 0xC17F hence this patch advertise the "max_lun" as 0xC17F which will allow SCSI mid layer to detect the W-LUs as well. But once the W-LUs are detected, UFSHCD driver may get the commands with SCSI LUN id upto 0xC17F but UPIU LUN id field is only 8-bit wide so it requires the mapping of SCSI LUN id to UPIU LUN id. This patch also add support for this mapping. Signed-off-by: Subhash Jadavani <[email protected]> Signed-off-by: Dolev Raviv <[email protected]> Signed-off-by: Sujit Reddy Thumma <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> commit 2a8fa600445c45222632810a4811ce820279d106 Author: Subhash Jadavani <su…

To avoid possible deadlock when allocating AGFL blocks, change the behaviour. The orignal hehaviour for freeing extents in an EFI is that the extents in the EFI were processed one by one in the same transaction. When the second and subsequent extents are being processed, we have produced busy extents for previous extents. If the second and subsequent extents are from the same AG as the busy extents are, we have the risk of deadlock when allocating AGFL blocks. A typical calltrace for the deadlock is like this: #0 context_switch() kernel/sched/core.c:3881 #1 __schedule() kernel/sched/core.c:5111 #2 schedule() kernel/sched/core.c:5186 #3 xfs_extent_busy_flush() fs/xfs/xfs_extent_busy.c:598 #4 xfs_alloc_ag_vextent_size() fs/xfs/libxfs/xfs_alloc.c:1641 #5 xfs_alloc_ag_vextent() fs/xfs/libxfs/xfs_alloc.c:828 torvalds#6 xfs_alloc_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:2362 torvalds#7 xfs_free_extent_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:3029 torvalds#8 __xfs_free_extent() fs/xfs/libxfs/xfs_alloc.c:3067 torvalds#9 xfs_trans_free_extent() fs/xfs/xfs_extfree_item.c:370 torvalds#10 xfs_efi_recover() fs/xfs/xfs_extfree_item.c:626 torvalds#11 xlog_recover_process_efi() fs/xfs/xfs_log_recover.c:4605 torvalds#12 xlog_recover_process_intents() fs/xfs/xfs_log_recover.c:4893 torvalds#13 xlog_recover_finish() fs/xfs/xfs_log_recover.c:5824 torvalds#14 xfs_log_mount_finish() fs/xfs/xfs_log.c:764 torvalds#15 xfs_mountfs() fs/xfs/xfs_mount.c:978 torvalds#16 xfs_fs_fill_super() fs/xfs/xfs_super.c:1908 torvalds#17 mount_bdev() fs/super.c:1417 torvalds#18 xfs_fs_mount() fs/xfs/xfs_super.c:1985 torvalds#19 legacy_get_tree() fs/fs_context.c:647 torvalds#20 vfs_get_tree() fs/super.c:1547 torvalds#21 do_new_mount() fs/namespace.c:2843 torvalds#22 do_mount() fs/namespace.c:3163 torvalds#23 ksys_mount() fs/namespace.c:3372 torvalds#24 __do_sys_mount() fs/namespace.c:3386 torvalds#25 __se_sys_mount() fs/namespace.c:3383 torvalds#26 __x64_sys_mount() fs/namespace.c:3383 torvalds#27 do_syscall_64() arch/x86/entry/common.c:296 torvalds#28 entry_SYSCALL_64() arch/x86/entry/entry_64.S:180 The deadlock could happen at both IO time and log recover time. To avoid above deadlock, this patch changes the extent free procedure. 1) it always let the first extent from the EFI go (no change). 2) increase the (new) AG counter when it let a extent go. 3) for the 2nd+ extents, if the owning AGs ready have pending extents don't let the extent go with current transaction. Instead, move the extent in question and subsequent extents to a new EFI and try the new EFI again with new transaction (by rolling current transaction). 4) for the EFD to orginal EFI, fill it with all the extents from the original EFI. 5) though the new EFI is placed after original EFD, it's safe as they are in same in-memory transaction. 6) The new AG counter for pending extent freeings is decremented after the log items in in-memory transaction is committed to CIL. Signed-off-by: Wengang Wang <[email protected]>

The following calltrace is seen: #0 context_switch() kernel/sched/core.c:3881 #1 __schedule() kernel/sched/core.c:5111 #2 schedule() kernel/sched/core.c:5186 #3 xfs_extent_busy_flush() fs/xfs/xfs_extent_busy.c:598 #4 xfs_alloc_ag_vextent_size() fs/xfs/libxfs/xfs_alloc.c:1641 #5 xfs_alloc_ag_vextent() fs/xfs/libxfs/xfs_alloc.c:828 torvalds#6 xfs_alloc_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:2362 torvalds#7 xfs_free_extent_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:3029 torvalds#8 __xfs_free_extent() fs/xfs/libxfs/xfs_alloc.c:3067 torvalds#9 xfs_trans_free_extent() fs/xfs/xfs_extfree_item.c:370 torvalds#10 xfs_efi_recover() fs/xfs/xfs_extfree_item.c:626 torvalds#11 xlog_recover_process_efi() fs/xfs/xfs_log_recover.c:4605 torvalds#12 xlog_recover_process_intents() fs/xfs/xfs_log_recover.c:4893 torvalds#13 xlog_recover_finish() fs/xfs/xfs_log_recover.c:5824 torvalds#14 xfs_log_mount_finish() fs/xfs/xfs_log.c:764 torvalds#15 xfs_mountfs() fs/xfs/xfs_mount.c:978 torvalds#16 xfs_fs_fill_super() fs/xfs/xfs_super.c:1908 torvalds#17 mount_bdev() fs/super.c:1417 torvalds#18 xfs_fs_mount() fs/xfs/xfs_super.c:1985 torvalds#19 legacy_get_tree() fs/fs_context.c:647 torvalds#20 vfs_get_tree() fs/super.c:1547 torvalds#21 do_new_mount() fs/namespace.c:2843 torvalds#22 do_mount() fs/namespace.c:3163 torvalds#23 ksys_mount() fs/namespace.c:3372 torvalds#24 __do_sys_mount() fs/namespace.c:3386 torvalds#25 __se_sys_mount() fs/namespace.c:3383 torvalds#26 __x64_sys_mount() fs/namespace.c:3383 torvalds#27 do_syscall_64() arch/x86/entry/common.c:296 torvalds#28 entry_SYSCALL_64() arch/x86/entry/entry_64.S:180 During the process of the 2nd and subsequetial record in an EFI. It is waiting for the busy blocks to be cleaned, but the only busy extent is still hold in current xfs_trans->t_busy. That busy extent was added when processing previous EFI record. And because that busy extent is not committed yet, it can't be cleaned. To avoid above deadlock, we don't block in xfs_extent_busy_flush() when allocating AGFL blocks, instead it returns -EAGAIN. On receiving -EAGAIN we are able to retry that EFI record with a new transaction after committing the old transactin. With old transaction committed, the busy extent attached to the old transaction get the change to be cleaned. On the retry, there is no existing busy extents in the new transaction, thus no deadlock. Signed-off-by: Wengang Wang <[email protected]>

The imx_sec_dsim_probe may be deferred (e.g. when uising ti,sn65dsi84). After a deferral, of_reset_control_array_get will fail because of the call in the previous imx_sec_dsim_probe. To fix this, unwind by doing the following when component_add is deferred: - Release reset controls by calling sec_dsim_of_put_resets - Disable PM by calling pm_runtime_disable. Tested using ti,sn65dsi84 on the following Variscite configurations: - VAR-SOM-MX8M-NANO v1.1 + Symphony v1.6 - DART-MX8M-MINI v1.1 + DT8MCustomBoard v3.0 Fixes the following: [ 1.929043] imx_sec_dsim_drv 32e10000.dsi_controller: version number is 0x1060200 [ 1.936603] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@32c00000/dsi_controller@32e10000 to encoder DSI-34: -517 [ 1.948815] imx_sec_dsim_drv 32e10000.dsi_controller: Failed to attach bridge: 32e10000.dsi_controller [ 1.958137] imx_sec_dsim_drv 32e10000.dsi_controller: failed to bind sec dsim bridge: -517 [ 1.972737] pps pps0: new PPS source ptp0 [ 2.083716] vddio: Bringing 1500000uV into 1800000-1800000uV [ 2.090807] fec 30be0000.ethernet eth0: registered PHC device 0 [ 2.103846] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 8 mkt segment 0 supported-hw 0x100 0x1 [ 2.113964] Hot alarm is canceled. GPU3D clock will return to 64/64 [ 2.123475] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO [ 2.128789] mxc-mipi-csi2-sam 32e30000.csi: supply mipi-phy not found, using dummy regulator [ 2.138023] mxc-mipi-csi2-sam 32e30000.csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 333000000 [ 2.150900] ------------[ cut here ]------------ [ 2.155536] WARNING: CPU: 2 PID: 8 at drivers/reset/core.c:765 __reset_control_get_internal+0x68/0x160 [ 2.164859] Modules linked in: [ 2.165181] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA [ 2.167919] CPU: 2 PID: 8 Comm: kworker/u8:0 Not tainted 5.15.60-05940-gd9b705ee8975 torvalds#28 [ 2.167926] Hardware name: Variscite VAR-SOM-MX8M-NANO on Symphony-Board (DT) [ 2.167932] Workqueue: events_unbound deferred_probe_work_func [ 2.167944] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.202981] pc : __reset_control_get_internal+0x68/0x160 [ 2.208295] lr : __of_reset_control_get+0x16c/0x1d0 [ 2.213176] sp : ffff800009df3990 [ 2.216488] x29: ffff800009df3990 x28: ffff000017dd1e80 x27: ffff00000516fb38 [ 2.223629] x26: 0000000000000001 x25: 0000000000000000 x24: 0000000000000001 [ 2.230767] x23: 0000000000000000 x22: ffff000004982880 x21: 0000000000000001 [ 2.237907] x20: ffff0000049828a0 x19: ffff00000545bd80 x18: ffffffffffffffff [ 2.245046] x17: 7465735f6b6c6320 x16: 2c3331203a656c74 x15: ffff00000516f78a [ 2.252186] x14: ffffffffffffffff x13: 0000000000000018 x12: 0101010101010101 [ 2.259326] x11: 0000000000000030 x10: 0101010101010101 x9 : 0000000000000000 [ 2.266465] x8 : 7f7f7f7f7f7f7f7f x7 : 70ff726b6b64622c x6 : 0000000000008072 [ 2.273604] x5 : fffffbfffdc01818 x4 : 0000000000000000 x3 : 0000000000000001 [ 2.280743] x2 : 0000000000000001 x1 : 0000000000000001 x0 : 0000000000000000 [ 2.287884] Call trace: [ 2.290329] __reset_control_get_internal+0x68/0x160 [ 2.295296] __of_reset_control_get+0x16c/0x1d0 [ 2.299828] of_reset_control_array_get+0xac/0x230 [ 2.304622] imx_sec_dsim_probe+0x21c/0x30c [ 2.308809] platform_probe+0x68/0xe0 [ 2.312475] really_probe.part.0+0x9c/0x30c [ 2.316660] __driver_probe_device+0x98/0x144 [ 2.321018] driver_probe_device+0xc8/0x15c [ 2.325202] __device_attach_driver+0xb4/0x120 [ 2.329645] bus_for_each_drv+0x78/0xd0 [ 2.333483] __device_attach+0xa8/0x1c0 [ 2.337320] device_initial_probe+0x14/0x20 [ 2.341505] bus_probe_device+0x9c/0xa4 [ 2.345342] deferred_probe_work_func+0x80/0xc0 [ 2.349874] process_one_work+0x1d0/0x354 [ 2.353890] worker_thread+0x2c0/0x470 [ 2.357641] kthread+0x150/0x160 [ 2.360871] ret_from_fork+0x10/0x20 [ 2.364451] ---[ end trace 60172b2d7c2580e5 ]--- [ 2.369212] ------------[ cut here ]------------ [ 2.373828] WARNING: CPU: 2 PID: 8 at drivers/reset/core.c:765 __reset_control_get_internal+0x68/0x160 [ 2.383141] Modules linked in: [ 2.386198] CPU: 2 PID: 8 Comm: kworker/u8:0 Tainted: G W 5.15.60-05940-gd9b705ee8975 torvalds#28 [ 2.395677] Hardware name: Variscite VAR-SOM-MX8M-NANO on Symphony-Board (DT) [ 2.402811] Workqueue: events_unbound deferred_probe_work_func [ 2.408648] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.415610] pc : __reset_control_get_internal+0x68/0x160 [ 2.420924] lr : __of_reset_control_get+0x16c/0x1d0 [ 2.425803] sp : ffff800009df3990 [ 2.429114] x29: ffff800009df3990 x28: ffff000017dd20a8 x27: ffff00000516fb38 [ 2.436255] x26: 0000000000000001 x25: 0000000000000000 x24: 0000000000000001 [ 2.443393] x23: 0000000000000000 x22: ffff000004982f80 x21: 0000000000000001 [ 2.450533] x20: ffff000004982fa0 x19: ffff00000545bf00 x18: ffffffffffffffff [ 2.457672] x17: 7465735f6b6c6320 x16: 2c3331203a656c74 x15: ffff00000516f78a [ 2.464812] x14: ffffffffffffffff x13: 0000000000000018 x12: 0101010101010101 [ 2.471952] x11: 0000000000000030 x10: 0101010101010101 x9 : 0000000000000000 [ 2.479091] x8 : 7f7f7f7f7f7f7f7f x7 : 70ff726b6b64622c x6 : 0000000000008072 [ 2.486230] x5 : fffffbfffdc01868 x4 : 0000000000000000 x3 : 0000000000000001 [ 2.493369] x2 : 0000000000000001 x1 : 0000000000000001 x0 : 0000000000000000 [ 2.500509] Call trace: [ 2.502954] __reset_control_get_internal+0x68/0x160 [ 2.507920] __of_reset_control_get+0x16c/0x1d0 [ 2.512452] of_reset_control_array_get+0xac/0x230 [ 2.517245] imx_sec_dsim_probe+0x21c/0x30c [ 2.521433] platform_probe+0x68/0xe0 [ 2.525097] really_probe.part.0+0x9c/0x30c [ 2.529281] __driver_probe_device+0x98/0x144 [ 2.533640] driver_probe_device+0xc8/0x15c [ 2.537824] __device_attach_driver+0xb4/0x120 [ 2.542269] bus_for_each_drv+0x78/0xd0 [ 2.546107] __device_attach+0xa8/0x1c0 [ 2.549945] device_initial_probe+0x14/0x20 [ 2.554129] bus_probe_device+0x9c/0xa4 [ 2.557965] deferred_probe_work_func+0x80/0xc0 [ 2.562497] process_one_work+0x1d0/0x354 [ 2.566509] worker_thread+0x2c0/0x470 [ 2.570260] kthread+0x150/0x160 [ 2.573490] ret_from_fork+0x10/0x20 [ 2.577067] ---[ end trace 60172b2d7c2580e6 ]--- [ 2.581883] ------------[ cut here ]------------ [ 2.586499] WARNING: CPU: 2 PID: 8 at drivers/reset/core.c:765 __reset_control_get_internal+0x68/0x160 [ 2.595808] Modules linked in: [ 2.598862] CPU: 2 PID: 8 Comm: kworker/u8:0 Tainted: G W 5.15.60-05940-gd9b705ee8975 torvalds#28 [ 2.608341] Hardware name: Variscite VAR-SOM-MX8M-NANO on Symphony-Board (DT) [ 2.615474] Workqueue: events_unbound deferred_probe_work_func [ 2.621309] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.628271] pc : __reset_control_get_internal+0x68/0x160 [ 2.633584] lr : __of_reset_control_get+0x16c/0x1d0 [ 2.638464] sp : ffff800009df3990 [ 2.641775] x29: ffff800009df3990 x28: ffff000017dd22d0 x27: ffff00000516fb38 [ 2.648915] x26: 0000000000000001 x25: 0000000000000000 x24: 0000000000000001 [ 2.656053] x23: 0000000000000000 x22: ffff000004983680 x21: 0000000000000001 [ 2.663192] x20: ffff0000049836a0 x19: ffff000004909500 x18: ffffffffffffffff [ 2.670331] x17: 7465735f6b6c6320 x16: 2c3331203a656c74 x15: ffff00000516f78a [ 2.677469] x14: ffffffffffffffff x13: 0000000000000018 x12: 0101010101010101 [ 2.684609] x11: 0000000000000030 x10: 0101010101010101 x9 : 0000000000000000 [ 2.691747] x8 : 7f7f7f7f7f7f7f7f x7 : 70ff726b6b64622c x6 : 0000000000008072 [ 2.698886] x5 : fffffbfffdc018b8 x4 : 0000000000000000 x3 : 0000000000000001 [ 2.706024] x2 : 0000000000000001 x1 : 0000000000000001 x0 : 0000000000000000 [ 2.713162] Call trace: [ 2.715606] __reset_control_get_internal+0x68/0x160 [ 2.720572] __of_reset_control_get+0x16c/0x1d0 [ 2.725103] of_reset_control_array_get+0xac/0x230 [ 2.729895] imx_sec_dsim_probe+0x21c/0x30c [ 2.734080] platform_probe+0x68/0xe0 [ 2.737744] really_probe.part.0+0x9c/0x30c [ 2.741928] __driver_probe_device+0x98/0x144 [ 2.746285] driver_probe_device+0xc8/0x15c [ 2.750469] __device_attach_driver+0xb4/0x120 [ 2.754914] bus_for_each_drv+0x78/0xd0 [ 2.758750] __device_attach+0xa8/0x1c0 [ 2.762586] device_initial_probe+0x14/0x20 [ 2.766771] bus_probe_device+0x9c/0xa4 [ 2.770606] deferred_probe_work_func+0x80/0xc0 [ 2.775137] process_one_work+0x1d0/0x354 [ 2.779149] worker_thread+0x2c0/0x470 [ 2.782899] kthread+0x150/0x160 [ 2.786127] ret_from_fork+0x10/0x20 [ 2.789703] ---[ end trace 60172b2d7c2580e7 ]--- [ 2.794359] imx_sec_dsim_drv 32e10000.dsi_controller: no invalid reset control exists [ 2.802553] imx_sec_dsim_drv: probe of 32e10000.dsi_controller failed with error -22 Signed-off-by: Nate Drude <[email protected]>

It is dangerous to output warnings in task_call_func, which may lead to the risk of deadlock. task_call_func uses p->pi_lock, and the serial port output may call try_to_wake_up to wake up the write buff, which also uses p->pi_lock. WARNING: possible circular locking dependency detected 6.7.0-rc4 torvalds#28 Not tainted ------------------------------------------------------ sh/475 is trying to acquire lock: ffff800082b17f20 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x18/0x48 but task is already holding lock: ffff0000c582dde0 (&p->pi_lock){-.-.}-{2:2}, at: task_call_func+0x40/0x124 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&p->pi_lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x68/0xd0 try_to_wake_up+0x5c/0x820 wake_up_process+0x18/0x24 __up.isra.0+0x40/0x4c up+0x5c/0x78 console_unlock+0x124/0x138 vt_move_to_console+0x48/0xb8 pm_restore_console+0x44/0x5c pm_suspend+0x2f0/0x688 state_store+0x8c/0x118 kobj_attr_store+0x18/0x2c sysfs_kf_write+0x4c/0x78 kernfs_fop_write_iter+0x120/0x1b4 vfs_write+0x3b4/0x558 ksys_write+0x6c/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x104 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x50/0xec el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194 -> #0 ((console_sem).lock){-.-.}-{2:2}: __lock_acquire+0x1248/0x1ab4 lock_acquire+0x120/0x308 _raw_spin_lock_irqsave+0x68/0xd0 down_trylock+0x18/0x48 __down_trylock_console_sem+0x38/0xc4 console_trylock+0x34/0x78 vprintk_emit+0x124/0x3a4 vprintk_default+0x38/0x44 vprintk+0xb0/0xc0 _printk+0x60/0x88 report_bug+0x208/0x270 bug_handler+0x24/0x6c brk_handler+0x70/0xd4 do_debug_exception+0x9c/0x16c el1_dbg+0x74/0x90 el1h_64_sync_handler+0xc8/0xe4 el1h_64_sync+0x64/0x68 __set_task_frozen+0x64/0xac task_call_func+0xa0/0x124 freeze_task+0xb4/0x10c try_to_freeze_tasks+0xd8/0x3fc freeze_processes+0xd4/0xe4 pm_suspend+0x21c/0x688 state_store+0x8c/0x118 kobj_attr_store+0x18/0x2c sysfs_kf_write+0x4c/0x78 kernfs_fop_write_iter+0x120/0x1b4 vfs_write+0x3b4/0x558 ksys_write+0x6c/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x104 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x50/0xec el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&p->pi_lock); lock((console_sem).lock); lock(&p->pi_lock); *** DEADLOCK *** 7 locks held by sh/475: #0: ffff0000c7245420 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x6c/0xfc #1: ffff0000c313a890 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf0/0x1b4 #2: ffff0000c0d3e0b8 (kn->active#48){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf8/0x1b4 #3: ffff800082b11530 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0xb4/0x688 #4: ffff800082ae6058 (tasklist_lock){.+.+}-{2:2}, at: try_to_freeze_tasks+0x88/0x3fc #5: ffff800082b93f10 (freezer_lock){....}-{2:2}, at: freeze_task+0x3c/0x10c torvalds#6: ffff0000c582dde0 (&p->pi_lock){-.-.}-{2:2}, at: task_call_func+0x40/0x124 Fixes: f5d39b0 ("freezer,sched: Rewrite core freezer logic") Signed-off-by: Xiaolei Wang <[email protected]>

scx_pair uses the default stride value of nr_cpu_ids / 2, which matches most x86 SMT configurations. However, it does allow specifying a custom stride value with -S so that e.g. neighboring CPUs can be paired up. However, not all stride values work and errors were not reported very well. This patch improves error handling so that scx_pair fails with clear error message if CPUs can't be paired up with the specified stride value. scx_pair now also prints out how CPUs are paired on startup. This should address issues torvalds#28 and torvalds#29.

KSAN calls into rcu code which then triggers a write that reenters into KSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??

As of 5ec8e8e(mm/sparsemem: fix race in accessing memory_section->usage) KMSAN now calls into RCU tree code during kmsan_get_metadata. This will trigger a write that will reenter into KMSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??

A wait operation can be interrupted for the following reasons: - a signal was received while waiting for the event. - the caller got forcibly unblocked while waiting for the event. - a signal was received or the caller got forcibly unblocked while trying to reacquire the lock once the event was successfully received. Ensure these conditions are differentiated when returning to the caller via the operation status (req.status), which enables the user interface to decide whether it needs to restart the syscall transparently after some fixups on signal receipt, or bail out on error if forcibly unblocked for any other reason. This change causes a bump of the current ABI version (torvalds#28). However, it does not affect current and older libevl releases since none of them check the operation status when an interrupted wait is detected. Signed-off-by: Philippe Gerum <[email protected]>

WARNING: please, no spaces at the start of a line \torvalds#28: FILE: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:608: + int err, pd;$ WARNING: please, no spaces at the start of a line \torvalds#59: FILE: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:789: + }$ total: 0 errors, 2 warnings, 90 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. 0001-pinctrl-mediatek-add-support-for-MTK_PULL_PD_TYPE.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS.

[ Upstream commit 60f07e2 ] We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace. We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。 The test case is as following。 bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/ bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable bash-4.4# bash-4.4# ps PID TTY TIME CMD 140 ? 00:00:01 bash 237 ? 00:00:00 ps [1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null which we debug use gdb as following: bash-4.4# gdb attach 155 (gdb) disassemble send Dump of assembler code for function send: 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, torvalds#28] 0x0000000000400c3c <+12>: strb w1, [sp, torvalds#27] 0x0000000000400c40 <+16>: str xzr, [sp, torvalds#40] 0x0000000000400c44 <+20>: str xzr, [sp, torvalds#48] 0x0000000000400c48 <+24>: add x0, sp, #0x1b 0x0000000000400c4c <+28>: mov w3, #0x0 // #0 0x0000000000400c50 <+32>: mov x2, #0x1 // #1 0x0000000000400c54 <+36>: mov x1, x0 0x0000000000400c58 <+40>: ldr w0, [sp, torvalds#28] 0x0000000000400c5c <+44>: bl 0x405e10 <mq_send> 0x0000000000400c60 <+48>: str w0, [sp, torvalds#60] 0x0000000000400c64 <+52>: ldr w0, [sp, torvalds#60] 0x0000000000400c68 <+56>: ldp x29, x30, [sp], torvalds#64 0x0000000000400c6c <+60>: ret End of assembler dump. (gdb) info b No breakpoints or watchpoints. (gdb) c Continuing. Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send () (gdb) x/10x 0x400c30 0x400c30 <send>: 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039 0x400c40 <send+16>: 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052 0x400c50 <send+32>: 0x220080d2 0xe10300aa (gdb) disassemble 0x400c30 Dump of assembler code for function send: => 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, torvalds#28] 0x0000000000400c3c <+12>: strb w1, [sp, torvalds#27] 0x0000000000400c40 <+16>: str xzr, [sp, torvalds#40] Signed-off-by: junhua huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Stable-dep-of: 13f8f1e ("arm64: probes: Fix uprobes for big-endian kernels") Signed-off-by: Sasha Levin <[email protected]>

WARNING: please, no spaces at the start of a line \torvalds#28: FILE: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:608: + int err, pd;$ WARNING: please, no spaces at the start of a line \torvalds#59: FILE: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:789: + }$ total: 0 errors, 2 warnings, 90 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. 0001-pinctrl-mediatek-add-support-for-MTK_PULL_PD_TYPE.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS.

[ Upstream commit 60f07e2 ] We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace. We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。 The test case is as following。 bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/ bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable bash-4.4# bash-4.4# ps PID TTY TIME CMD 140 ? 00:00:01 bash 237 ? 00:00:00 ps [1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null which we debug use gdb as following: bash-4.4# gdb attach 155 (gdb) disassemble send Dump of assembler code for function send: 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, torvalds#28] 0x0000000000400c3c <+12>: strb w1, [sp, torvalds#27] 0x0000000000400c40 <+16>: str xzr, [sp, torvalds#40] 0x0000000000400c44 <+20>: str xzr, [sp, torvalds#48] 0x0000000000400c48 <+24>: add x0, sp, #0x1b 0x0000000000400c4c <+28>: mov w3, #0x0 // #0 0x0000000000400c50 <+32>: mov x2, #0x1 // #1 0x0000000000400c54 <+36>: mov x1, x0 0x0000000000400c58 <+40>: ldr w0, [sp, torvalds#28] 0x0000000000400c5c <+44>: bl 0x405e10 <mq_send> 0x0000000000400c60 <+48>: str w0, [sp, torvalds#60] 0x0000000000400c64 <+52>: ldr w0, [sp, torvalds#60] 0x0000000000400c68 <+56>: ldp x29, x30, [sp], torvalds#64 0x0000000000400c6c <+60>: ret End of assembler dump. (gdb) info b No breakpoints or watchpoints. (gdb) c Continuing. Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send () (gdb) x/10x 0x400c30 0x400c30 <send>: 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039 0x400c40 <send+16>: 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052 0x400c50 <send+32>: 0x220080d2 0xe10300aa (gdb) disassemble 0x400c30 Dump of assembler code for function send: => 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, torvalds#28] 0x0000000000400c3c <+12>: strb w1, [sp, torvalds#27] 0x0000000000400c40 <+16>: str xzr, [sp, torvalds#40] Signed-off-by: junhua huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Stable-dep-of: 13f8f1e ("arm64: probes: Fix uprobes for big-endian kernels") Signed-off-by: Sasha Levin <[email protected]>

WARNING: please, no spaces at the start of a line \torvalds#28: FILE: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:608: + int err, pd;$ WARNING: please, no spaces at the start of a line \torvalds#59: FILE: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:789: + }$ total: 0 errors, 2 warnings, 90 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. 0001-pinctrl-mediatek-add-support-for-MTK_PULL_PD_TYPE.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS.

FastRPC firmware seems to be broken, frequently says ``` [ 1141.986082] qcom_q6v5_pas 2400000.remoteproc: fatal error received: err_qdi.c:964:EF:sensor_process:0x1 :TMR_CLNT_1:0x80:dog_virtual_user.c:240:USER-PD DOG detects stalled initialization, triage with IMAGE OWNE R [ 1141.986291] remoteproc remoteproc0: crash detected in 2400000.remoteproc: type fatal error [ 1141.986390] remoteproc remoteproc0: handling crash torvalds#28 in 2400000.remoteproc [ 1141.986461] remoteproc remoteproc0: recovering 2400000.remoteproc [ 1142.016342] remoteproc remoteproc0: stopped remote processor 2400000.remoteproc ``` So disable SLPI for now because it does nothing other than dmesg spam

FastRPC firmware seems to be broken, frequently says [ 1141.986082] qcom_q6v5_pas 2400000.remoteproc: fatal error received: err_qdi.c:964:EF:sensor_process:0x1 :TMR_CLNT_1:0x80:dog_virtual_user.c:240:USER-PD DOG detects stalled initialization, triage with IMAGE OWNE R [ 1141.986291] remoteproc remoteproc0: crash detected in 2400000.remoteproc: type fatal error [ 1141.986390] remoteproc remoteproc0: handling crash torvalds#28 in 2400000.remoteproc [ 1141.986461] remoteproc remoteproc0: recovering 2400000.remoteproc [ 1142.016342] remoteproc remoteproc0: stopped remote processor 2400000.remoteproc So disable SLPI for now because it does nothing other than dmesg spam

FastRPC firmware seems to be broken, frequently says [ 1141.986082] qcom_q6v5_pas 2400000.remoteproc: fatal error received: err_qdi.c:964:EF:sensor_process:0x1 :TMR_CLNT_1:0x80:dog_virtual_user.c:240:USER-PD DOG detects stalled initialization, triage with IMAGE OWNER [ 1141.986291] remoteproc remoteproc0: crash detected in 2400000.remoteproc: type fatal error [ 1141.986390] remoteproc remoteproc0: handling crash torvalds#28 in 2400000.remoteproc [ 1141.986461] remoteproc remoteproc0: recovering 2400000.remoteproc [ 1142.016342] remoteproc remoteproc0: stopped remote processor 2400000.remoteproc So disable SLPI for now because it does nothing other than dmesg spam

[ Upstream commit 60f07e2 ] We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace. We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。 The test case is as following。 bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/ bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable bash-4.4# bash-4.4# ps PID TTY TIME CMD 140 ? 00:00:01 bash 237 ? 00:00:00 ps [1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null which we debug use gdb as following: bash-4.4# gdb attach 155 (gdb) disassemble send Dump of assembler code for function send: 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, torvalds#28] 0x0000000000400c3c <+12>: strb w1, [sp, torvalds#27] 0x0000000000400c40 <+16>: str xzr, [sp, torvalds#40] 0x0000000000400c44 <+20>: str xzr, [sp, torvalds#48] 0x0000000000400c48 <+24>: add x0, sp, #0x1b 0x0000000000400c4c <+28>: mov w3, #0x0 // #0 0x0000000000400c50 <+32>: mov x2, #0x1 // #1 0x0000000000400c54 <+36>: mov x1, x0 0x0000000000400c58 <+40>: ldr w0, [sp, torvalds#28] 0x0000000000400c5c <+44>: bl 0x405e10 <mq_send> 0x0000000000400c60 <+48>: str w0, [sp, torvalds#60] 0x0000000000400c64 <+52>: ldr w0, [sp, torvalds#60] 0x0000000000400c68 <+56>: ldp x29, x30, [sp], torvalds#64 0x0000000000400c6c <+60>: ret End of assembler dump. (gdb) info b No breakpoints or watchpoints. (gdb) c Continuing. Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send () (gdb) x/10x 0x400c30 0x400c30 <send>: 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039 0x400c40 <send+16>: 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052 0x400c50 <send+32>: 0x220080d2 0xe10300aa (gdb) disassemble 0x400c30 Dump of assembler code for function send: => 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, torvalds#28] 0x0000000000400c3c <+12>: strb w1, [sp, torvalds#27] 0x0000000000400c40 <+16>: str xzr, [sp, torvalds#40] Signed-off-by: junhua huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Stable-dep-of: 13f8f1e ("arm64: probes: Fix uprobes for big-endian kernels") Signed-off-by: Sasha Levin <[email protected]>

WARNING: please, no spaces at the start of a line \torvalds#28: FILE: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:608: + int err, pd;$ WARNING: please, no spaces at the start of a line \torvalds#59: FILE: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:789: + }$ total: 0 errors, 2 warnings, 90 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. 0001-pinctrl-mediatek-add-support-for-MTK_PULL_PD_TYPE.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS.

A wait operation can be interrupted for the following reasons: - a signal was received while waiting for the event. - the caller got forcibly unblocked while waiting for the event. - a signal was received or the caller got forcibly unblocked while trying to reacquire the lock once the event was successfully received. Ensure these conditions are differentiated when returning to the caller via the operation status (req.status), which enables the user interface to decide whether it needs to restart the syscall transparently after some fixups on signal receipt, or bail out on error if forcibly unblocked for any other reason. This change causes a bump of the current ABI version (torvalds#28). However, it does not affect current and older libevl releases since none of them check the operation status when an interrupted wait is detected. Signed-off-by: Philippe Gerum <[email protected]>

Update README

4c309de

mikegagnon closed this Mar 1, 2013

mikegagnon deleted the patch-1 branch March 1, 2013 21:26

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Remove trailing slash from kernel.org link #28

Remove trailing slash from kernel.org link #28

mikegagnon commented Mar 1, 2013

Remove trailing slash from kernel.org link #28

Remove trailing slash from kernel.org link #28

Conversation

mikegagnon commented Mar 1, 2013