core: add a brief docs section on comparing levels (#1446)

This adds a section to the `Level` docs explaining the comparison rules
for `Level` and `LevelFilter`. It turns out this wasn't really
explicitly documented anywhere.

I may have gone a bit overboard on this, but I think the new docs should
be helpful...

See #1274 (comment)

Signed-off-by: Eliza Weisman <[email protected]>
Co-authored-by: David Barsky <[email protected]>

tracing-core/src/metadata.rs

@@ -14,7 +14,9 @@ use crate::stdlib::{
 ///   or event occurred. The `tracing` macros default to using the module
 ///   path where the span or event originated as the target, but it may be
 ///   overridden.
-/// - A [verbosity level].
+/// - A [verbosity level]. This determines how verbose a given span or event
+///   is, and allows enabling or disabling more verbose diagnostics
+///   situationally. See the documentation for the [`Level`] type for details.
 /// - The names of the [fields] defined by the span or event.
 /// - Whether the metadata corresponds to a span or event.
 ///
@@ -89,20 +91,150 @@ pub struct Metadata<'a> {
 /// Indicates whether the callsite is a span or event.
 #[derive(Clone, Debug, Eq, PartialEq)]
 pub struct Kind(KindInner);
-
 /// Describes the level of verbosity of a span or event.
+///
+/// # Comparing Levels
+///
+/// `Level` implements the [`PartialOrd`] and [`Ord`] traits, allowing two
+/// `Level`s to be compared to determine which is considered more or less
+/// verbose. Levels which are more verbose are considered "greater than" levels
+/// which are less verbose, with [`Level::ERROR`] considered the lowest, and
+/// [`Level::TRACE`] considered the highest.
+///
+/// For example:
+/// ```
+/// use tracing_core::Level;
+///
+/// assert!(Level::TRACE > Level::DEBUG);
+/// assert!(Level::ERROR < Level::WARN);
+/// assert!(Level::INFO <= Level::DEBUG);
+/// assert_eq!(Level::TRACE, Level::TRACE);
+/// ```
+///
+/// # Filtering
+///
+/// `Level`s are typically used to implement filtering that determines which
+/// spans and events are enabled. Depending on the use case, more or less
+/// verbose diagnostics may be desired. For example, when running in
+/// development, [`DEBUG`]-level traces may be enabled by default. When running in
+/// production, only [`INFO`]-level and lower traces might be enabled. Libraries
+/// may include very verbose diagnostics at the [`DEBUG`] and/or [`TRACE`] levels.
+/// Applications using those libraries typically chose to ignore those traces. However, when
+/// debugging an issue involving said libraries, it may be useful to temporarily
+/// enable the more verbose traces.
+///
+/// The [`LevelFilter`] type is provided to enable filtering traces by
+/// verbosity. `Level`s can be compared against [`LevelFilter`]s, and
+/// [`LevelFilter`] has a variant for each `Level`, which compares analogously
+/// to that level. In addition, [`LevelFilter`] adds a [`LevelFilter::OFF`]
+/// variant, which is considered "less verbose" than every other `Level. This is
+/// intended to allow filters to completely disable tracing in a particular context.
+///
+/// For example:
+/// ```
+/// use tracing_core::{Level, LevelFilter};
+///
+/// assert!(LevelFilter::OFF < Level::TRACE);
+/// assert!(LevelFilter::TRACE > Level::DEBUG);
+/// assert!(LevelFilter::ERROR < Level::WARN);
+/// assert!(LevelFilter::INFO <= Level::DEBUG);
+/// assert!(LevelFilter::INFO >= Level::INFO);
+/// ```
+///
+/// ## Examples
+///
+/// Below is a simple example of how a [`Subscriber`] could implement filtering through
+/// a [`LevelFilter`]. When a span or event is recorded, the [`Subscriber::enabled`] method
+/// compares the span or event's `Level` against the configured [`LevelFilter`].
+/// The optional [`Subscriber::max_level_hint`] method can also be implemented to allow spans
+/// and events above a maximum verbosity level to be skipped more efficiently,
+/// often improving performance in short-lived programs.
+///
+/// ```
+/// use tracing_core::{span, Event, Level, LevelFilter, Subscriber, Metadata};
+/// # use tracing_core::span::{Id, Record, Current};
+///
+/// #[derive(Debug)]
+/// pub struct MySubscriber {
+///     /// The most verbose level that this subscriber will enable.
+///     max_level: LevelFilter,
+///
+///     // ...
+/// }
+///
+/// impl MySubscriber {
+///     /// Returns a new `MySubscriber` which will record spans and events up to
+///     /// `max_level`.
+///     pub fn with_max_level(max_level: LevelFilter) -> Self {
+///         Self {
+///             max_level,
+///             // ...
+///         }
+///     }
+/// }
+/// impl Subscriber for MySubscriber {
+///     fn enabled(&self, meta: &Metadata<'_>) -> bool {
+///         // A span or event is enabled if it is at or below the configured
+///         // maximum level.
+///         meta.level() <= &self.max_level
+///     }
+///
+///     // This optional method returns the most verbose level that this
+///     // subscriber will enable. Although implementing this method is not
+///     // *required*, it permits additional optimizations when it is provided,
+///     // allowing spans and events above the max level to be skipped
+///     // more efficiently.
+///     fn max_level_hint(&self) -> Option<LevelFilter> {
+///         Some(self.max_level)
+///     }
+///
+///     // Implement the rest of the subscriber...
+///     fn new_span(&self, span: &span::Attributes<'_>) -> span::Id {
+///         // ...
+///         # drop(span); Id::from_u64(1)
+///     }
+
+///     fn event(&self, event: &Event<'_>) {
+///         // ...
+///         # drop(event);
+///     }
+///
+///     // ...
+///     # fn enter(&self, _: &Id) {}
+///     # fn exit(&self, _: &Id) {}
+///     # fn record(&self, _: &Id, _: &Record<'_>) {}
+///     # fn record_follows_from(&self, _: &Id, _: &Id) {}
+/// }
+/// ```
+///
+/// It is worth noting that the `tracing-subscriber` crate provides [additional
+/// APIs][envfilter] for performing more sophisticated filtering, such as
+/// enabling different levels based on which module or crate a span or event is
+/// recorded in.
+///
+/// [`DEBUG`]: Level::DEBUG
+/// [`INFO`]: Level::INFO
+/// [`TRACE`]: Level::TRACE
+/// [`Subscriber::enabled`]: crate::subscriber::Subscriber::enabled
+/// [`Subscriber::max_level_hint`]: crate::subscriber::Subscriber::max_level_hint
+/// [subscriber]: crate::subscriber::Subscriber
+/// [envfilter]: https://docs.rs/tracing-subscriber/latest/tracing_subscriber/filter/struct.EnvFilter.html
 #[derive(Copy, Clone, Debug, PartialEq, Eq)]
 pub struct Level(LevelInner);
 
-/// A filter comparable to a verbosity `Level`.
+/// A filter comparable to a verbosity [`Level`].
 ///
-/// If a `Level` is considered less than a `LevelFilter`, it should be
+/// If a [`Level`] is considered less than a `LevelFilter`, it should be
 /// considered disabled; if greater than or equal to the `LevelFilter`, that
 /// level is enabled.
 ///
 /// Note that this is essentially identical to the `Level` type, but with the
-/// addition of an `OFF` level that completely disables all trace
+/// addition of an [`OFF`] level that completely disables all trace
 /// instrumentation.
+///
+/// See the documentation for the [`Level`] type for more details.
+///
+/// [`OFF`]: LevelFilter::OFF
 #[repr(transparent)]
 #[derive(Copy, Clone, Eq, PartialEq)]
 pub struct LevelFilter(Option<Level>);