Mark s390x condition code register as clobbered in inline assembly #111331
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
rustbot
added
S-waiting-on-review
Amanieu
approved these changes
May 8, 2023
src/doc/unstable-book/src/language-features/asm-experimental-arch.md
Outdated
Show resolved
Hide resolved
|
Not directly related to this PR, but for |
|
@bors r+ |
bors
added
S-waiting-on-bors
|
This looks correct to me. Thanks for taking care of this! |
bors
added a commit
to rust-lang-ci/rust
that referenced
this pull request
May 8, 2023
Rollup of 7 pull requests Successful merges: - rust-lang#105354 (Add deployment-target --print flag for Apple targets) - rust-lang#110377 (Update max_atomic_width of armv7r and armv7_sony_vita targets to 64.) - rust-lang#110638 (STD support for PSVita) - rust-lang#111211 (Don't compute trait super bounds unless they're positive) - rust-lang#111315 (Remove `identity_future` from stdlib) - rust-lang#111331 (Mark s390x condition code register as clobbered in inline assembly) - rust-lang#111332 (Improve inline asm for LoongArch) Failed merges: r? `@ghost` `@rustbot` modify labels: rollup
GuillaumeGomez
added a commit
to GuillaumeGomez/rust
that referenced
this pull request
Oct 1, 2024
Support clobber_abi and vector/access registers (clobber-only) in s390x inline assembly This supports `clobber_abi` which is one of the requirements of stabilization mentioned in rust-lang#93335. This also supports vector registers (as `vreg`) and access registers (as `areg`) as clobber-only, which need to support clobbering of them to implement clobber_abi. Refs: - "1.2.1.1. Register Preservation Rules" section in ELF Application Binary Interface s390x Supplement, Version 1.6.1 (lzsabi_s390x.pdf in https://github.com/IBM/s390x-abi/releases/tag/v1.6.1) - Register definition in LLVM: - Vector registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td#L249 - Access registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td#L332 I have three questions: - ~~ELF Application Binary Interface s390x Supplement says that `cc` (condition code, bits 18-19 of PSW) is "Volatile". However, we do not have a register class for `cc` and instead mark `cc` as clobbered unless `preserves_flags` is specified (rust-lang#111331). Therefore, in the current implementation, if both `preserves_flags` and `clobber_abi` are specified, `cc` is not marked as clobbered. Is this okay? Or even if `preserves_flags` is used, should `cc` be marked as clobbered if `clobber_abi` is used?~~ UPDATE: resolved rust-lang#130630 (comment) - ~~ELF Application Binary Interface s390x Supplement says that `pm` (program mask, bits 20-23 of PSW) is "Cleared". There does not appear to be any registers associated with this in either [LLVM](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td) or [GCC](https://github.com/gcc-mirror/gcc/blob/33ccc1314dcdb0b988a9276ca6b6ce9b07bea21e/gcc/config/s390/s390.h#L407-L431), so at this point I don't see any way other than to just ignore it. Is this okay as-is?~~ UPDATE: resolved rust-lang#130630 (comment) - Is "areg" a good name for register class name for access registers? It may be a bit confusing between that and `reg_addr`, which uses the “a” constraint (rust-lang#119431)... Note: - GCC seems to [recognize only `a0` and `a1`](https://github.com/gcc-mirror/gcc/blob/33ccc1314dcdb0b988a9276ca6b6ce9b07bea21e/gcc/config/s390/s390.h#L428-L429), and using `a[2-15]` [causes errors](https://godbolt.org/z/a46vx8jjn). Given that cg_gcc has a similar problem with other architecture (rust-lang/rustc_codegen_gcc#485), I don't feel this is a blocker for this PR, but it is worth mentioning here. - `vreg` should be able to accept `#[repr(simd)]` types as input if the `vector` target feature added in rust-lang#127506 is enabled, but core_arch has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable, so I have not implemented it in this PR. EDIT: And supporting it is probably more complex than doing the equivalent on other architectures... rust-lang#88245 (comment) cc `@uweigand` r? `@Amanieu` `@rustbot` label +O-SystemZ
rust-timer
added a commit
to rust-lang-ci/rust
that referenced
this pull request
Oct 1, 2024
Rollup merge of rust-lang#130630 - taiki-e:s390x-clobber-abi, r=Amanieu Support clobber_abi and vector/access registers (clobber-only) in s390x inline assembly This supports `clobber_abi` which is one of the requirements of stabilization mentioned in rust-lang#93335. This also supports vector registers (as `vreg`) and access registers (as `areg`) as clobber-only, which need to support clobbering of them to implement clobber_abi. Refs: - "1.2.1.1. Register Preservation Rules" section in ELF Application Binary Interface s390x Supplement, Version 1.6.1 (lzsabi_s390x.pdf in https://github.com/IBM/s390x-abi/releases/tag/v1.6.1) - Register definition in LLVM: - Vector registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td#L249 - Access registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td#L332 I have three questions: - ~~ELF Application Binary Interface s390x Supplement says that `cc` (condition code, bits 18-19 of PSW) is "Volatile". However, we do not have a register class for `cc` and instead mark `cc` as clobbered unless `preserves_flags` is specified (rust-lang#111331). Therefore, in the current implementation, if both `preserves_flags` and `clobber_abi` are specified, `cc` is not marked as clobbered. Is this okay? Or even if `preserves_flags` is used, should `cc` be marked as clobbered if `clobber_abi` is used?~~ UPDATE: resolved rust-lang#130630 (comment) - ~~ELF Application Binary Interface s390x Supplement says that `pm` (program mask, bits 20-23 of PSW) is "Cleared". There does not appear to be any registers associated with this in either [LLVM](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td) or [GCC](https://github.com/gcc-mirror/gcc/blob/33ccc1314dcdb0b988a9276ca6b6ce9b07bea21e/gcc/config/s390/s390.h#L407-L431), so at this point I don't see any way other than to just ignore it. Is this okay as-is?~~ UPDATE: resolved rust-lang#130630 (comment) - Is "areg" a good name for register class name for access registers? It may be a bit confusing between that and `reg_addr`, which uses the “a” constraint (rust-lang#119431)... Note: - GCC seems to [recognize only `a0` and `a1`](https://github.com/gcc-mirror/gcc/blob/33ccc1314dcdb0b988a9276ca6b6ce9b07bea21e/gcc/config/s390/s390.h#L428-L429), and using `a[2-15]` [causes errors](https://godbolt.org/z/a46vx8jjn). Given that cg_gcc has a similar problem with other architecture (rust-lang/rustc_codegen_gcc#485), I don't feel this is a blocker for this PR, but it is worth mentioning here. - `vreg` should be able to accept `#[repr(simd)]` types as input if the `vector` target feature added in rust-lang#127506 is enabled, but core_arch has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable, so I have not implemented it in this PR. EDIT: And supporting it is probably more complex than doing the equivalent on other architectures... rust-lang#88245 (comment) cc `@uweigand` r? `@Amanieu` `@rustbot` label +O-SystemZ
This was referenced Oct 4, 2024
antoyo
pushed a commit
to rust-lang/rustc_codegen_gcc
that referenced
this pull request
Oct 9, 2024
Support clobber_abi and vector/access registers (clobber-only) in s390x inline assembly This supports `clobber_abi` which is one of the requirements of stabilization mentioned in #93335. This also supports vector registers (as `vreg`) and access registers (as `areg`) as clobber-only, which need to support clobbering of them to implement clobber_abi. Refs: - "1.2.1.1. Register Preservation Rules" section in ELF Application Binary Interface s390x Supplement, Version 1.6.1 (lzsabi_s390x.pdf in https://github.com/IBM/s390x-abi/releases/tag/v1.6.1) - Register definition in LLVM: - Vector registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td#L249 - Access registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td#L332 I have three questions: - ~~ELF Application Binary Interface s390x Supplement says that `cc` (condition code, bits 18-19 of PSW) is "Volatile". However, we do not have a register class for `cc` and instead mark `cc` as clobbered unless `preserves_flags` is specified (rust-lang/rust#111331). Therefore, in the current implementation, if both `preserves_flags` and `clobber_abi` are specified, `cc` is not marked as clobbered. Is this okay? Or even if `preserves_flags` is used, should `cc` be marked as clobbered if `clobber_abi` is used?~~ UPDATE: resolved rust-lang/rust#130630 (comment) - ~~ELF Application Binary Interface s390x Supplement says that `pm` (program mask, bits 20-23 of PSW) is "Cleared". There does not appear to be any registers associated with this in either [LLVM](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td) or [GCC](https://github.com/gcc-mirror/gcc/blob/33ccc1314dcdb0b988a9276ca6b6ce9b07bea21e/gcc/config/s390/s390.h#L407-L431), so at this point I don't see any way other than to just ignore it. Is this okay as-is?~~ UPDATE: resolved rust-lang/rust#130630 (comment) - Is "areg" a good name for register class name for access registers? It may be a bit confusing between that and `reg_addr`, which uses the “a” constraint (rust-lang/rust#119431)... Note: - GCC seems to [recognize only `a0` and `a1`](https://github.com/gcc-mirror/gcc/blob/33ccc1314dcdb0b988a9276ca6b6ce9b07bea21e/gcc/config/s390/s390.h#L428-L429), and using `a[2-15]` [causes errors](https://godbolt.org/z/a46vx8jjn). Given that cg_gcc has a similar problem with other architecture (#485), I don't feel this is a blocker for this PR, but it is worth mentioning here. - `vreg` should be able to accept `#[repr(simd)]` types as input if the `vector` target feature added in rust-lang/rust#127506 is enabled, but core_arch has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable, so I have not implemented it in this PR. EDIT: And supporting it is probably more complex than doing the equivalent on other architectures... rust-lang/rust#88245 (comment) cc `@uweigand` r? `@Amanieu` `@rustbot` label +O-SystemZ
matthiaskrgr
added a commit
to matthiaskrgr/rust
that referenced
this pull request
Nov 9, 2024
…nieu Stabilize s390x inline assembly This stabilizes inline assembly for s390x (SystemZ). Corresponding reference PR: rust-lang/reference#1643 --- From the requirements of stabilization mentioned in rust-lang#93335 > Each architecture needs to be reviewed before stabilization: > - It must have clobber_abi. Done in rust-lang#130630. > - It must be possible to clobber every register that is normally clobbered by a function call. Done in the PR that added support for clobber_abi. > - Generally review that the exposed register classes make sense. The followings can be used as input/output: - `reg` (`r[0-10]`, `r[12-14]`): General-purpose register - `reg_addr` (`r[1-10]`, `r[12-14]`): General-purpose register except `r0` which is evaluated as zero in an address context This class is needed because `r0`, which may be allocated when using the `reg` class, cannot be used as a register in certain contexts. This is identical to the `a` constraint in LLVM and GCC. See rust-lang#119431 for details. - `freg` (`f[0-15]`): Floating-point register The followings are clobber-only: - `vreg` (`v[0-31]`): Vector register Technically `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `vector` target feature added is enabled, but `core::arch` has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable. Everything related is unstable, so the fact that this is currently a clobber-only should not be considered a stabilization blocker. (rust-lang#130869 tracks unstable stuff here) - `areg` (`a[2-15]`): Access register All of the above register classes except `reg_addr` are needed for `clobber_abi`. The followings cannot be used as operands for inline asm (see also [getReservedRegs](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.cpp#L258-L282) and [SystemZELFRegisters](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.h#L107-L128) in LLVM): - `r11`: frame pointer - `r15`: stack pointer - `a0`, `a1`: Reserved for system use - `c[0-15]` (control register) Reserved by the kernel Although not listed in the above requirements, `preserves_flags` is implemented in rust-lang#111331. --- cc `@uweigand` r? `@Amanieu` `@rustbot` label +O-SystemZ +A-inline-assembly
workingjubilee
added a commit
to workingjubilee/rustc
that referenced
this pull request
Nov 10, 2024
…nieu Stabilize s390x inline assembly This stabilizes inline assembly for s390x (SystemZ). Corresponding reference PR: rust-lang/reference#1643 --- From the requirements of stabilization mentioned in rust-lang#93335 > Each architecture needs to be reviewed before stabilization: > - It must have clobber_abi. Done in rust-lang#130630. > - It must be possible to clobber every register that is normally clobbered by a function call. Done in the PR that added support for clobber_abi. > - Generally review that the exposed register classes make sense. The followings can be used as input/output: - `reg` (`r[0-10]`, `r[12-14]`): General-purpose register - `reg_addr` (`r[1-10]`, `r[12-14]`): General-purpose register except `r0` which is evaluated as zero in an address context This class is needed because `r0`, which may be allocated when using the `reg` class, cannot be used as a register in certain contexts. This is identical to the `a` constraint in LLVM and GCC. See rust-lang#119431 for details. - `freg` (`f[0-15]`): Floating-point register The followings are clobber-only: - `vreg` (`v[0-31]`): Vector register Technically `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `vector` target feature added is enabled, but `core::arch` has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable. Everything related is unstable, so the fact that this is currently a clobber-only should not be considered a stabilization blocker. (rust-lang#130869 tracks unstable stuff here) - `areg` (`a[2-15]`): Access register All of the above register classes except `reg_addr` are needed for `clobber_abi`. The followings cannot be used as operands for inline asm (see also [getReservedRegs](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.cpp#L258-L282) and [SystemZELFRegisters](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.h#L107-L128) in LLVM): - `r11`: frame pointer - `r15`: stack pointer - `a0`, `a1`: Reserved for system use - `c[0-15]` (control register) Reserved by the kernel Although not listed in the above requirements, `preserves_flags` is implemented in rust-lang#111331. --- cc ``@uweigand`` r? ``@Amanieu`` ``@rustbot`` label +O-SystemZ +A-inline-assembly
rust-timer
added a commit
to rust-lang-ci/rust
that referenced
this pull request
Nov 10, 2024
Rollup merge of rust-lang#131258 - taiki-e:s390x-stabilize-asm, r=Amanieu Stabilize s390x inline assembly This stabilizes inline assembly for s390x (SystemZ). Corresponding reference PR: rust-lang/reference#1643 --- From the requirements of stabilization mentioned in rust-lang#93335 > Each architecture needs to be reviewed before stabilization: > - It must have clobber_abi. Done in rust-lang#130630. > - It must be possible to clobber every register that is normally clobbered by a function call. Done in the PR that added support for clobber_abi. > - Generally review that the exposed register classes make sense. The followings can be used as input/output: - `reg` (`r[0-10]`, `r[12-14]`): General-purpose register - `reg_addr` (`r[1-10]`, `r[12-14]`): General-purpose register except `r0` which is evaluated as zero in an address context This class is needed because `r0`, which may be allocated when using the `reg` class, cannot be used as a register in certain contexts. This is identical to the `a` constraint in LLVM and GCC. See rust-lang#119431 for details. - `freg` (`f[0-15]`): Floating-point register The followings are clobber-only: - `vreg` (`v[0-31]`): Vector register Technically `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `vector` target feature added is enabled, but `core::arch` has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable. Everything related is unstable, so the fact that this is currently a clobber-only should not be considered a stabilization blocker. (rust-lang#130869 tracks unstable stuff here) - `areg` (`a[2-15]`): Access register All of the above register classes except `reg_addr` are needed for `clobber_abi`. The followings cannot be used as operands for inline asm (see also [getReservedRegs](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.cpp#L258-L282) and [SystemZELFRegisters](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.h#L107-L128) in LLVM): - `r11`: frame pointer - `r15`: stack pointer - `a0`, `a1`: Reserved for system use - `c[0-15]` (control register) Reserved by the kernel Although not listed in the above requirements, `preserves_flags` is implemented in rust-lang#111331. --- cc ``@uweigand`` r? ``@Amanieu`` ``@rustbot`` label +O-SystemZ +A-inline-assembly
RalfJung
pushed a commit
to RalfJung/miri
that referenced
this pull request
Nov 10, 2024
Stabilize s390x inline assembly This stabilizes inline assembly for s390x (SystemZ). Corresponding reference PR: rust-lang/reference#1643 --- From the requirements of stabilization mentioned in rust-lang/rust#93335 > Each architecture needs to be reviewed before stabilization: > - It must have clobber_abi. Done in rust-lang/rust#130630. > - It must be possible to clobber every register that is normally clobbered by a function call. Done in the PR that added support for clobber_abi. > - Generally review that the exposed register classes make sense. The followings can be used as input/output: - `reg` (`r[0-10]`, `r[12-14]`): General-purpose register - `reg_addr` (`r[1-10]`, `r[12-14]`): General-purpose register except `r0` which is evaluated as zero in an address context This class is needed because `r0`, which may be allocated when using the `reg` class, cannot be used as a register in certain contexts. This is identical to the `a` constraint in LLVM and GCC. See rust-lang/rust#119431 for details. - `freg` (`f[0-15]`): Floating-point register The followings are clobber-only: - `vreg` (`v[0-31]`): Vector register Technically `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `vector` target feature added is enabled, but `core::arch` has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable. Everything related is unstable, so the fact that this is currently a clobber-only should not be considered a stabilization blocker. (rust-lang/rust#130869 tracks unstable stuff here) - `areg` (`a[2-15]`): Access register All of the above register classes except `reg_addr` are needed for `clobber_abi`. The followings cannot be used as operands for inline asm (see also [getReservedRegs](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.cpp#L258-L282) and [SystemZELFRegisters](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.h#L107-L128) in LLVM): - `r11`: frame pointer - `r15`: stack pointer - `a0`, `a1`: Reserved for system use - `c[0-15]` (control register) Reserved by the kernel Although not listed in the above requirements, `preserves_flags` is implemented in rust-lang/rust#111331. --- cc ``@uweigand`` r? ``@Amanieu`` ``@rustbot`` label +O-SystemZ +A-inline-assembly
mati865
pushed a commit
to mati865/rust
that referenced
this pull request
Nov 12, 2024
…nieu Stabilize s390x inline assembly This stabilizes inline assembly for s390x (SystemZ). Corresponding reference PR: rust-lang/reference#1643 --- From the requirements of stabilization mentioned in rust-lang#93335 > Each architecture needs to be reviewed before stabilization: > - It must have clobber_abi. Done in rust-lang#130630. > - It must be possible to clobber every register that is normally clobbered by a function call. Done in the PR that added support for clobber_abi. > - Generally review that the exposed register classes make sense. The followings can be used as input/output: - `reg` (`r[0-10]`, `r[12-14]`): General-purpose register - `reg_addr` (`r[1-10]`, `r[12-14]`): General-purpose register except `r0` which is evaluated as zero in an address context This class is needed because `r0`, which may be allocated when using the `reg` class, cannot be used as a register in certain contexts. This is identical to the `a` constraint in LLVM and GCC. See rust-lang#119431 for details. - `freg` (`f[0-15]`): Floating-point register The followings are clobber-only: - `vreg` (`v[0-31]`): Vector register Technically `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `vector` target feature added is enabled, but `core::arch` has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable. Everything related is unstable, so the fact that this is currently a clobber-only should not be considered a stabilization blocker. (rust-lang#130869 tracks unstable stuff here) - `areg` (`a[2-15]`): Access register All of the above register classes except `reg_addr` are needed for `clobber_abi`. The followings cannot be used as operands for inline asm (see also [getReservedRegs](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.cpp#L258-L282) and [SystemZELFRegisters](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.h#L107-L128) in LLVM): - `r11`: frame pointer - `r15`: stack pointer - `a0`, `a1`: Reserved for system use - `c[0-15]` (control register) Reserved by the kernel Although not listed in the above requirements, `preserves_flags` is implemented in rust-lang#111331. --- cc ``@uweigand`` r? ``@Amanieu`` ``@rustbot`` label +O-SystemZ +A-inline-assembly
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Various s390x instructions (arithmetic operations, logical operations, comparisons, etc. see also "Condition Codes" section in z/Architecture Reference Summary) modify condition code register
cc, but AFAIK there is currently no way to mark it as clobbered inasm!.ccregister definition in LLVM:https://github.com/llvm/llvm-project/blob/main/llvm/lib/Target/SystemZ/SystemZRegisterInfo.td#L320
This PR also updates asm_experimental_arch docs in the unstable-book to mention s390x registers.
cc @uweigand
r? @Amanieu
@rustbot label +O-SystemZ +A-inline-assembly