Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

lots of partitions #250

Closed
jmdebruin opened this issue Mar 18, 2013 · 4 comments
Closed

lots of partitions #250

jmdebruin opened this issue Mar 18, 2013 · 4 comments

Comments

@jmdebruin
Copy link

After building todays kernel i seem to have lots of partitions on my gpt usb disk:

[ 3.609110] scsi 0:0:0:0: Direct-Access WDC WD10 EADS-00L5B1 PQ: 0 ANSI: 2 CCS
[ 3.616530] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.620261] sd 0:0:0:0: [sda] Write Protect is off
[ 3.623064] sd 0:0:0:0: [sda] Mode Sense: 28 00 00 00
[ 3.626623] sd 0:0:0:0: [sda] No Caching mode page present
[ 3.629413] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.644755] sd 0:0:0:0: [sda] No Caching mode page present
[ 3.647583] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.714481] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 sda37 sda38 sda39 sda40 sda41 sda42 sda43 sda44 sda45 sda46 sda47 sda48 sda49 sda50 sda51 sda52 sda53 sda54 sda55 sda56 sda57 sda58 sda59 sda60 sda61 sda62 sda63 sda64 sda65 sda66 sda67 sda68 sda69 sda70 sda71 sda72 sda73 sda74 sda75 sda76 sda77 sda78 sda79 sda80 sda81 sda82 sda83 sda84 sda85 sda86 sda87 sda88 sda89 sda90 sda91 sda92 sda93 sda94 sda95 sda96 sda97 sda98 sda99 sda100 sda101 sda102 sda103 sda104 sda105 sda106 sda107 sda108 sda109 sda110 sda111 sda112 sda113 sda114 sda115 sda116 sda117 sda118 sda119 sda120 sda121 sda122 sda123 sda124 sda125 sda126 sda127 sda128
[ 3.835824] sd 0:0:0:0: [sda] No Caching mode page present
[ 3.838735] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.847128] sd 0:0:0:0: [sda] Attached SCSI disk

gdisk only reports one, which is what it should be.

Hans
@popcornmix
Copy link
Collaborator

What does kernel from rpi-update do?

@jmdebruin
Copy link
Author

On 03/18/2013 07:29 PM, popcornmix wrote:

What does kernel from rpi-update do?

That has btrfs as a module and I put my root on that. I could start a
bisect if i could somehow figure out my previous git pull.

Hans

@DirtyJerz
Copy link

I can confirm this issue with my setup as well (Seagate 3TB GPT). Tried a rpi-update while remote from my work and net has not come back online. I will edit this post when I have further details.

**Edit
Start.elf was corrupt, but that's a different issue.
After rpi-update, issue is gone.
Linux raspberrypi 3.6.11+ #408 PREEMPT Wed Apr 10 20:33:39 BST 2013 armv6l GNU/Linux

[ 4.298363] scsi 0:0:0:0: Direct-Access Seagate Expansion Desk 070B PQ: 0 ANSI: 6
[ 4.303898] sd 0:0:0:0: [sda] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[ 4.313504] sd 0:0:0:0: [sda] Write Protect is off
[ 4.325227] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.326265] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.337641] sd 0:0:0:0: [sda] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[ 13.835060] sda: sda1
[ 13.841799] sd 0:0:0:0: [sda] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[ 13.847668] sd 0:0:0:0: [sda] Attached SCSI disk
[ 13.858085] Registered led device: led0

@notro notro mentioned this issue Dec 29, 2014
Closed
@popcornmix
Copy link
Collaborator

Closing issue since there has been no activity for more than 2 months. Reopen if needed.

davet321 pushed a commit to davet321/rpi-linux that referenced this issue May 16, 2016
@zlim @davem330
arm64: bpf: jit JMP_JSET_{X,K}
98397fc 
Original implementation commit e54bcde ("arm64: eBPF JIT compiler")
had the relevant code paths, but due to an oversight always fail jiting.

As a result, we had been falling back to BPF interpreter whenever a BPF
program has JMP_JSET_{X,K} instructions.

With this fix, we confirm that the corresponding tests in lib/test_bpf
continue to pass, and also jited.

...
[    2.784553] test_bpf: raspberrypi#30 JSET jited:1 188 192 197 PASS
[    2.791373] test_bpf: raspberrypi#31 tcpdump port 22 jited:1 325 677 625 PASS
[    2.808800] test_bpf: raspberrypi#32 tcpdump complex jited:1 323 731 991 PASS
...
[    3.190759] test_bpf: raspberrypi#237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS
[    3.192524] test_bpf: raspberrypi#238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS
[    3.211014] test_bpf: raspberrypi#249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS
[    3.212973] test_bpf: raspberrypi#250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS
...

Fixes: e54bcde ("arm64: eBPF JIT compiler")
Signed-off-by: Zi Shen Lim <[email protected]>
Acked-by: Will Deacon <[email protected]>
Acked-by: Yang Shi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
davet321 pushed a commit to davet321/rpi-linux that referenced this issue Jun 8, 2016
@jankara @gregkh
ext4: fix oops on corrupted filesystem
80f1ca5 
commit 74177f5 upstream.

When filesystem is corrupted in the right way, it can happen
ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we
subsequently remove inode from the in-memory orphan list. However this
deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we
leave i_orphan list_head with a stale content. Later we can look at this
content causing list corruption, oops, or other issues. The reported
trace looked like:

WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100()
list_del corruption, 0000000061c1d6e0->next is LIST_POISON1
0000000000100100)
CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ raspberrypi#250
Stack:
 60462947 62219960 602ede24 62219960
 602ede24 603ca293 622198f0 602f02eb
 62219950 6002c12c 62219900 601b4d6b
Call Trace:
 [<6005769c>] ? vprintk_emit+0x2dc/0x5c0
 [<602ede24>] ? printk+0x0/0x94
 [<600190bc>] show_stack+0xdc/0x1a0
 [<602ede24>] ? printk+0x0/0x94
 [<602ede24>] ? printk+0x0/0x94
 [<602f02eb>] dump_stack+0x2a/0x2c
 [<6002c12c>] warn_slowpath_common+0x9c/0xf0
 [<601b4d6b>] ? __list_del_entry+0x6b/0x100
 [<6002c254>] warn_slowpath_fmt+0x94/0xa0
 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0
 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0
 [<60023ebf>] ? set_signals+0x3f/0x50
 [<600a205a>] ? kmem_cache_free+0x10a/0x180
 [<602f4e88>] ? mutex_lock+0x18/0x30
 [<601b4d6b>] __list_del_entry+0x6b/0x100
 [<601177ec>] ext4_orphan_del+0x22c/0x2f0
 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0
 [<6010b973>] ? ext4_truncate+0x383/0x390
 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0
 [<6001bb50>] ? copy_from_user+0x0/0xb0
 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0
 [<60072c4f>] generic_perform_write+0xaf/0x1e0
 [<600c4166>] ? file_update_time+0x46/0x110
 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0
 [<6010030f>] ext4_file_write_iter+0x15f/0x470
 [<60094e10>] ? unlink_file_vma+0x0/0x70
 [<6009b180>] ? unlink_anon_vmas+0x0/0x260
 [<6008f169>] ? free_pgtables+0xb9/0x100
 [<600a6030>] __vfs_write+0xb0/0x130
 [<600a61d5>] vfs_write+0xa5/0x170
 [<600a63d6>] SyS_write+0x56/0xe0
 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0
 [<6001b698>] handle_syscall+0x68/0x90
 [<6002633d>] userspace+0x4fd/0x600
 [<6002274f>] ? save_registers+0x1f/0x40
 [<60028bd7>] ? arch_prctl+0x177/0x1b0
 [<60017bd5>] fork_handler+0x85/0x90

Fix the problem by using list_del_init() as we always should with
i_orphan list.

Reported-by: Vegard Nossum <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Jun 8, 2016
@jankara @gregkh
ext4: fix oops on corrupted filesystem
6ce15a9 
commit 74177f5 upstream.

When filesystem is corrupted in the right way, it can happen
ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we
subsequently remove inode from the in-memory orphan list. However this
deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we
leave i_orphan list_head with a stale content. Later we can look at this
content causing list corruption, oops, or other issues. The reported
trace looked like:

WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100()
list_del corruption, 0000000061c1d6e0->next is LIST_POISON1
0000000000100100)
CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ #250
Stack:
 60462947 62219960 602ede24 62219960
 602ede24 603ca293 622198f0 602f02eb
 62219950 6002c12c 62219900 601b4d6b
Call Trace:
 [<6005769c>] ? vprintk_emit+0x2dc/0x5c0
 [<602ede24>] ? printk+0x0/0x94
 [<600190bc>] show_stack+0xdc/0x1a0
 [<602ede24>] ? printk+0x0/0x94
 [<602ede24>] ? printk+0x0/0x94
 [<602f02eb>] dump_stack+0x2a/0x2c
 [<6002c12c>] warn_slowpath_common+0x9c/0xf0
 [<601b4d6b>] ? __list_del_entry+0x6b/0x100
 [<6002c254>] warn_slowpath_fmt+0x94/0xa0
 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0
 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0
 [<60023ebf>] ? set_signals+0x3f/0x50
 [<600a205a>] ? kmem_cache_free+0x10a/0x180
 [<602f4e88>] ? mutex_lock+0x18/0x30
 [<601b4d6b>] __list_del_entry+0x6b/0x100
 [<601177ec>] ext4_orphan_del+0x22c/0x2f0
 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0
 [<6010b973>] ? ext4_truncate+0x383/0x390
 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0
 [<6001bb50>] ? copy_from_user+0x0/0xb0
 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0
 [<60072c4f>] generic_perform_write+0xaf/0x1e0
 [<600c4166>] ? file_update_time+0x46/0x110
 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0
 [<6010030f>] ext4_file_write_iter+0x15f/0x470
 [<60094e10>] ? unlink_file_vma+0x0/0x70
 [<6009b180>] ? unlink_anon_vmas+0x0/0x260
 [<6008f169>] ? free_pgtables+0xb9/0x100
 [<600a6030>] __vfs_write+0xb0/0x130
 [<600a61d5>] vfs_write+0xa5/0x170
 [<600a63d6>] SyS_write+0x56/0xe0
 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0
 [<6001b698>] handle_syscall+0x68/0x90
 [<6002633d>] userspace+0x4fd/0x600
 [<6002274f>] ? save_registers+0x1f/0x40
 [<60028bd7>] ? arch_prctl+0x177/0x1b0
 [<60017bd5>] fork_handler+0x85/0x90

Fix the problem by using list_del_init() as we always should with
i_orphan list.

Reported-by: Vegard Nossum <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Jun 8, 2016
@jankara @gregkh
ext4: fix oops on corrupted filesystem
b2601bb 
commit 74177f5 upstream.

When filesystem is corrupted in the right way, it can happen
ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we
subsequently remove inode from the in-memory orphan list. However this
deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we
leave i_orphan list_head with a stale content. Later we can look at this
content causing list corruption, oops, or other issues. The reported
trace looked like:

WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100()
list_del corruption, 0000000061c1d6e0->next is LIST_POISON1
0000000000100100)
CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ #250
Stack:
 60462947 62219960 602ede24 62219960
 602ede24 603ca293 622198f0 602f02eb
 62219950 6002c12c 62219900 601b4d6b
Call Trace:
 [<6005769c>] ? vprintk_emit+0x2dc/0x5c0
 [<602ede24>] ? printk+0x0/0x94
 [<600190bc>] show_stack+0xdc/0x1a0
 [<602ede24>] ? printk+0x0/0x94
 [<602ede24>] ? printk+0x0/0x94
 [<602f02eb>] dump_stack+0x2a/0x2c
 [<6002c12c>] warn_slowpath_common+0x9c/0xf0
 [<601b4d6b>] ? __list_del_entry+0x6b/0x100
 [<6002c254>] warn_slowpath_fmt+0x94/0xa0
 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0
 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0
 [<60023ebf>] ? set_signals+0x3f/0x50
 [<600a205a>] ? kmem_cache_free+0x10a/0x180
 [<602f4e88>] ? mutex_lock+0x18/0x30
 [<601b4d6b>] __list_del_entry+0x6b/0x100
 [<601177ec>] ext4_orphan_del+0x22c/0x2f0
 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0
 [<6010b973>] ? ext4_truncate+0x383/0x390
 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0
 [<6001bb50>] ? copy_from_user+0x0/0xb0
 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0
 [<60072c4f>] generic_perform_write+0xaf/0x1e0
 [<600c4166>] ? file_update_time+0x46/0x110
 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0
 [<6010030f>] ext4_file_write_iter+0x15f/0x470
 [<60094e10>] ? unlink_file_vma+0x0/0x70
 [<6009b180>] ? unlink_anon_vmas+0x0/0x260
 [<6008f169>] ? free_pgtables+0xb9/0x100
 [<600a6030>] __vfs_write+0xb0/0x130
 [<600a61d5>] vfs_write+0xa5/0x170
 [<600a63d6>] SyS_write+0x56/0xe0
 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0
 [<6001b698>] handle_syscall+0x68/0x90
 [<6002633d>] userspace+0x4fd/0x600
 [<6002274f>] ? save_registers+0x1f/0x40
 [<60028bd7>] ? arch_prctl+0x177/0x1b0
 [<60017bd5>] fork_handler+0x85/0x90

Fix the problem by using list_del_init() as we always should with
i_orphan list.

Reported-by: Vegard Nossum <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Apr 24, 2017
@davem330
net: ipv6: RTF_PCPU should not be settable from userspace
557c44b 
Andrey reported a fault in the IPv6 route code:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS:  00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
 ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...

Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.

Fix by checking for the flag and failing with EINVAL.

Fixes: d52d399 ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Tested-by: Andrey Konovalov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
ED6E0F17 pushed a commit to ED6E0F17/linux that referenced this issue May 4, 2017
@gregkh
net: ipv6: RTF_PCPU should not be settable from userspace
94e5670 
[ Upstream commit 557c44b ]

Andrey reported a fault in the IPv6 route code:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [raspberrypi#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ raspberrypi#250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS:  00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
 ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...

Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.

Fix by checking for the flag and failing with EINVAL.

Fixes: d52d399 ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Tested-by: Andrey Konovalov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue May 5, 2017
@gregkh
net: ipv6: RTF_PCPU should not be settable from userspace
5e54291 
[ Upstream commit 557c44b ]

Andrey reported a fault in the IPv6 route code:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS:  00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
 ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...

Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.

Fix by checking for the flag and failing with EINVAL.

Fixes: d52d399 ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Tested-by: Andrey Konovalov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
dlech pushed a commit to ev3dev/rpi-kernel that referenced this issue Jul 25, 2017
@gregkh
net: ipv6: RTF_PCPU should not be settable from userspace
f6b9490 
[ Upstream commit 557c44b ]

Andrey reported a fault in the IPv6 route code:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ raspberrypi#250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS:  00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
 ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...

Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.

Fix by checking for the flag and failing with EINVAL.

Fixes: d52d399 ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Tested-by: Andrey Konovalov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
nathanchance pushed a commit to nathanchance/pi-kernel that referenced this issue Apr 19, 2018
@gregkh
rtl8187: Fix NULL pointer dereference in priv->conf_mutex
a2813b4 
commit 7972326 upstream.

This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.

Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty raspberrypi#250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14)
 [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c)
 [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938)
 [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c)
 [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0)
 [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54)
 [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320)
 [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4)
 [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120)
 [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c)
 [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48)
 [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840)
 [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4)
 [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0)
 [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c)
 [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c)
 Unable to handle kernel NULL pointer dereference at virtual address 00000000
 pgd = cd1ec000
 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000
 Internal error: Oops: 817 [raspberrypi#1] PREEMPT ARM
 Modules linked in:
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty raspberrypi#250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 task: ce73eec0 task.stack: cd1ea000
 PC is at mutex_lock_nested+0xe8/0x3b0
 LR is at mutex_lock_nested+0xd0/0x3b0

Cc: [email protected]
Signed-off-by: Sudhir Sreedharan <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Apr 26, 2018
@gregkh
rtl8187: Fix NULL pointer dereference in priv->conf_mutex
661364d 
commit 7972326 upstream.

This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.

Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14)
 [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c)
 [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938)
 [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c)
 [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0)
 [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54)
 [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320)
 [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4)
 [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120)
 [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c)
 [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48)
 [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840)
 [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4)
 [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0)
 [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c)
 [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c)
 Unable to handle kernel NULL pointer dereference at virtual address 00000000
 pgd = cd1ec000
 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000
 Internal error: Oops: 817 [#1] PREEMPT ARM
 Modules linked in:
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 task: ce73eec0 task.stack: cd1ea000
 PC is at mutex_lock_nested+0xe8/0x3b0
 LR is at mutex_lock_nested+0xd0/0x3b0

Cc: [email protected]
Signed-off-by: Sudhir Sreedharan <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue May 5, 2018
@gregkh
rtl8187: Fix NULL pointer dereference in priv->conf_mutex
9def916 
commit 7972326 upstream.

This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.

Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14)
 [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c)
 [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938)
 [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c)
 [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0)
 [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54)
 [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320)
 [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4)
 [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120)
 [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c)
 [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48)
 [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840)
 [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4)
 [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0)
 [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c)
 [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c)
 Unable to handle kernel NULL pointer dereference at virtual address 00000000
 pgd = cd1ec000
 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000
 Internal error: Oops: 817 [#1] PREEMPT ARM
 Modules linked in:
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 task: ce73eec0 task.stack: cd1ea000
 PC is at mutex_lock_nested+0xe8/0x3b0
 LR is at mutex_lock_nested+0xd0/0x3b0

Cc: [email protected]
Signed-off-by: Sudhir Sreedharan <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
nathanchance pushed a commit to nathanchance/pi-kernel that referenced this issue May 28, 2020
@dhowells @gregkh
afs: Don't unlock fetched data pages until the op completes successfully
496c7c6 
[ Upstream commit 9d1be4f ]

Don't call req->page_done() on each page as we finish filling it with
the data coming from the network.  Whilst this might speed up the
application a bit, it's a problem if there's a network failure and the
operation has to be reissued.

If this happens, an oops occurs because afs_readpages_page_done() clears
the pointer to each page it unlocks and when a retry happens, the
pointers to the pages it wants to fill are now NULL (and the pages have
been unlocked anyway).

Instead, wait till the operation completes successfully and only then
release all the pages after clearing any terminal gap (the server can
give us less data than we requested as we're allowed to ask for more
than is available).

KASAN produces a bug like the following, and even without KASAN, it can
oops and panic.

    BUG: KASAN: wild-memory-access in _copy_to_iter+0x323/0x5f4
    Write of size 1404 at addr 0005088000000000 by task md5sum/5235

    CPU: 0 PID: 5235 Comm: md5sum Not tainted 5.7.0-rc3-fscache+ raspberrypi#250
    Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
    Call Trace:
     memcpy+0x39/0x58
     _copy_to_iter+0x323/0x5f4
     __skb_datagram_iter+0x89/0x2a6
     skb_copy_datagram_iter+0x129/0x135
     rxrpc_recvmsg_data.isra.0+0x615/0xd42
     rxrpc_kernel_recv_data+0x1e9/0x3ae
     afs_extract_data+0x139/0x33a
     yfs_deliver_fs_fetch_data64+0x47a/0x91b
     afs_deliver_to_call+0x304/0x709
     afs_wait_for_call_to_complete+0x1cc/0x4ad
     yfs_fs_fetch_data+0x279/0x288
     afs_fetch_data+0x1e1/0x38d
     afs_readpages+0x593/0x72e
     read_pages+0xf5/0x21e
     __do_page_cache_readahead+0x128/0x23f
     ondemand_readahead+0x36e/0x37f
     generic_file_buffered_read+0x234/0x680
     new_sync_read+0x109/0x17e
     vfs_read+0xe6/0x138
     ksys_read+0xd8/0x14d
     do_syscall_64+0x6e/0x8a
     entry_SYSCALL_64_after_hwframe+0x49/0xb3

Fixes: 196ee9c ("afs: Make afs_fs_fetch_data() take a list of pages")
Fixes: 30062bd ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Jun 3, 2020
@dhowells @gregkh
afs: Don't unlock fetched data pages until the op completes successfully
1d36937 
[ Upstream commit 9d1be4f ]

Don't call req->page_done() on each page as we finish filling it with
the data coming from the network.  Whilst this might speed up the
application a bit, it's a problem if there's a network failure and the
operation has to be reissued.

If this happens, an oops occurs because afs_readpages_page_done() clears
the pointer to each page it unlocks and when a retry happens, the
pointers to the pages it wants to fill are now NULL (and the pages have
been unlocked anyway).

Instead, wait till the operation completes successfully and only then
release all the pages after clearing any terminal gap (the server can
give us less data than we requested as we're allowed to ask for more
than is available).

KASAN produces a bug like the following, and even without KASAN, it can
oops and panic.

    BUG: KASAN: wild-memory-access in _copy_to_iter+0x323/0x5f4
    Write of size 1404 at addr 0005088000000000 by task md5sum/5235

    CPU: 0 PID: 5235 Comm: md5sum Not tainted 5.7.0-rc3-fscache+ #250
    Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
    Call Trace:
     memcpy+0x39/0x58
     _copy_to_iter+0x323/0x5f4
     __skb_datagram_iter+0x89/0x2a6
     skb_copy_datagram_iter+0x129/0x135
     rxrpc_recvmsg_data.isra.0+0x615/0xd42
     rxrpc_kernel_recv_data+0x1e9/0x3ae
     afs_extract_data+0x139/0x33a
     yfs_deliver_fs_fetch_data64+0x47a/0x91b
     afs_deliver_to_call+0x304/0x709
     afs_wait_for_call_to_complete+0x1cc/0x4ad
     yfs_fs_fetch_data+0x279/0x288
     afs_fetch_data+0x1e1/0x38d
     afs_readpages+0x593/0x72e
     read_pages+0xf5/0x21e
     __do_page_cache_readahead+0x128/0x23f
     ondemand_readahead+0x36e/0x37f
     generic_file_buffered_read+0x234/0x680
     new_sync_read+0x109/0x17e
     vfs_read+0xe6/0x138
     ksys_read+0xd8/0x14d
     do_syscall_64+0x6e/0x8a
     entry_SYSCALL_64_after_hwframe+0x49/0xb3

Fixes: 196ee9c ("afs: Make afs_fs_fetch_data() take a list of pages")
Fixes: 30062bd ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Jun 3, 2020
@dhowells @torvalds
afs: Don't unlock fetched data pages until the op completes successfully
9d1be4f 
Don't call req->page_done() on each page as we finish filling it with
the data coming from the network.  Whilst this might speed up the
application a bit, it's a problem if there's a network failure and the
operation has to be reissued.

If this happens, an oops occurs because afs_readpages_page_done() clears
the pointer to each page it unlocks and when a retry happens, the
pointers to the pages it wants to fill are now NULL (and the pages have
been unlocked anyway).

Instead, wait till the operation completes successfully and only then
release all the pages after clearing any terminal gap (the server can
give us less data than we requested as we're allowed to ask for more
than is available).

KASAN produces a bug like the following, and even without KASAN, it can
oops and panic.

    BUG: KASAN: wild-memory-access in _copy_to_iter+0x323/0x5f4
    Write of size 1404 at addr 0005088000000000 by task md5sum/5235

    CPU: 0 PID: 5235 Comm: md5sum Not tainted 5.7.0-rc3-fscache+ #250
    Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
    Call Trace:
     memcpy+0x39/0x58
     _copy_to_iter+0x323/0x5f4
     __skb_datagram_iter+0x89/0x2a6
     skb_copy_datagram_iter+0x129/0x135
     rxrpc_recvmsg_data.isra.0+0x615/0xd42
     rxrpc_kernel_recv_data+0x1e9/0x3ae
     afs_extract_data+0x139/0x33a
     yfs_deliver_fs_fetch_data64+0x47a/0x91b
     afs_deliver_to_call+0x304/0x709
     afs_wait_for_call_to_complete+0x1cc/0x4ad
     yfs_fs_fetch_data+0x279/0x288
     afs_fetch_data+0x1e1/0x38d
     afs_readpages+0x593/0x72e
     read_pages+0xf5/0x21e
     __do_page_cache_readahead+0x128/0x23f
     ondemand_readahead+0x36e/0x37f
     generic_file_buffered_read+0x234/0x680
     new_sync_read+0x109/0x17e
     vfs_read+0xe6/0x138
     ksys_read+0xd8/0x14d
     do_syscall_64+0x6e/0x8a
     entry_SYSCALL_64_after_hwframe+0x49/0xb3

Fixes: 196ee9c ("afs: Make afs_fs_fetch_data() take a list of pages")
Fixes: 30062bd ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
popcornmix pushed a commit that referenced this issue Dec 31, 2021
@LiBaokun96 @torvalds
kfence: fix memory leak when cat kfence objects
0129ab1 
Hulk robot reported a kmemleak problem:

    unreferenced object 0xffff93d1d8cc02e8 (size 248):
      comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
      hex dump (first 32 bytes):
        00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00  .@..............
        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      backtrace:
         seq_open+0x2a/0x80
         full_proxy_open+0x167/0x1e0
         do_dentry_open+0x1e1/0x3a0
         path_openat+0x961/0xa20
         do_filp_open+0xae/0x120
         do_sys_openat2+0x216/0x2f0
         do_sys_open+0x57/0x80
         do_syscall_64+0x33/0x40
         entry_SYSCALL_64_after_hwframe+0x44/0xa9
    unreferenced object 0xffff93d419854000 (size 4096):
      comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
      hex dump (first 32 bytes):
        6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30  kfence-#250: 0x0
        30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d  0000000754bda12-
      backtrace:
         seq_read_iter+0x313/0x440
         seq_read+0x14b/0x1a0
         full_proxy_read+0x56/0x80
         vfs_read+0xa5/0x1b0
         ksys_read+0xa0/0xf0
         do_syscall_64+0x33/0x40
         entry_SYSCALL_64_after_hwframe+0x44/0xa9

I find that we can easily reproduce this problem with the following
commands:

	cat /sys/kernel/debug/kfence/objects
	echo scan > /sys/kernel/debug/kmemleak
	cat /sys/kernel/debug/kmemleak

The leaked memory is allocated in the stack below:

    do_syscall_64
      do_sys_open
        do_dentry_open
          full_proxy_open
            seq_open            ---> alloc seq_file
      vfs_read
        full_proxy_read
          seq_read
            seq_read_iter
              traverse          ---> alloc seq_buf

And it should have been released in the following process:

    do_syscall_64
      syscall_exit_to_user_mode
        exit_to_user_mode_prepare
          task_work_run
            ____fput
              __fput
                full_proxy_release  ---> free here

However, the release function corresponding to file_operations is not
implemented in kfence.  As a result, a memory leak occurs.  Therefore,
the solution to this problem is to implement the corresponding release
function.

Link: https://lkml.kernel.org/r/[email protected]
Fixes: 0ce20dd ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Baokun Li <[email protected]>
Reported-by: Hulk Robot <[email protected]>
Acked-by: Marco Elver <[email protected]>
Reviewed-by: Kefeng Wang <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Yu Kuai <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
popcornmix pushed a commit that referenced this issue Dec 31, 2021
@LiBaokun96 @gregkh
kfence: fix memory leak when cat kfence objects
2f06c82 
commit 0129ab1 upstream.

Hulk robot reported a kmemleak problem:

    unreferenced object 0xffff93d1d8cc02e8 (size 248):
      comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
      hex dump (first 32 bytes):
        00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00  .@..............
        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      backtrace:
         seq_open+0x2a/0x80
         full_proxy_open+0x167/0x1e0
         do_dentry_open+0x1e1/0x3a0
         path_openat+0x961/0xa20
         do_filp_open+0xae/0x120
         do_sys_openat2+0x216/0x2f0
         do_sys_open+0x57/0x80
         do_syscall_64+0x33/0x40
         entry_SYSCALL_64_after_hwframe+0x44/0xa9
    unreferenced object 0xffff93d419854000 (size 4096):
      comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
      hex dump (first 32 bytes):
        6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30  kfence-#250: 0x0
        30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d  0000000754bda12-
      backtrace:
         seq_read_iter+0x313/0x440
         seq_read+0x14b/0x1a0
         full_proxy_read+0x56/0x80
         vfs_read+0xa5/0x1b0
         ksys_read+0xa0/0xf0
         do_syscall_64+0x33/0x40
         entry_SYSCALL_64_after_hwframe+0x44/0xa9

I find that we can easily reproduce this problem with the following
commands:

	cat /sys/kernel/debug/kfence/objects
	echo scan > /sys/kernel/debug/kmemleak
	cat /sys/kernel/debug/kmemleak

The leaked memory is allocated in the stack below:

    do_syscall_64
      do_sys_open
        do_dentry_open
          full_proxy_open
            seq_open            ---> alloc seq_file
      vfs_read
        full_proxy_read
          seq_read
            seq_read_iter
              traverse          ---> alloc seq_buf

And it should have been released in the following process:

    do_syscall_64
      syscall_exit_to_user_mode
        exit_to_user_mode_prepare
          task_work_run
            ____fput
              __fput
                full_proxy_release  ---> free here

However, the release function corresponding to file_operations is not
implemented in kfence.  As a result, a memory leak occurs.  Therefore,
the solution to this problem is to implement the corresponding release
function.

Link: https://lkml.kernel.org/r/[email protected]
Fixes: 0ce20dd ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Baokun Li <[email protected]>
Reported-by: Hulk Robot <[email protected]>
Acked-by: Marco Elver <[email protected]>
Reviewed-by: Kefeng Wang <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Yu Kuai <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Jul 1, 2024
drm/fbdev-dma: Only set smem_start is enable per module option
d92a758 
Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().

Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.

[    3.536043] ------------[ cut here ]------------
[    3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[    3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[    3.565455] Modules linked in:
[    3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[    3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[    3.582452] Workqueue: events_unbound deferred_probe_work_func
[    3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.595233] pc : __virt_to_phys+0x68/0x98
[    3.599246] lr : __virt_to_phys+0x68/0x98
[    3.603276] sp : ffff800083603990
[    3.677939] Call trace:
[    3.680393]  __virt_to_phys+0x68/0x98
[    3.684067]  drm_fbdev_dma_helper_fb_probe+0x138/0x238
[    3.689214]  __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[    3.695385]  drm_fb_helper_initial_config+0x4c/0x68
[    3.700264]  drm_fbdev_dma_client_hotplug+0x8c/0xe0
[    3.705161]  drm_client_register+0x60/0xb0
[    3.709269]  drm_fbdev_dma_setup+0x94/0x148

Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().

Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reported-by: Peng Fan (OSS) <[email protected]>
Closes: https://lore.kernel.org/dri-devel/[email protected]/
Reported-by: Geert Uytterhoeven <[email protected]>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdX3N0szUvt1VTbroa2zrT1Nye_VzPb5qqCZ7z5gSm7HGw@mail.gmail.com/
Fixes: a51c766 ("drm/fb-helper: Consolidate CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM")
Tested-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: <[email protected]> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
popcornmix pushed a commit that referenced this issue Jul 8, 2024
@gregkh
drm/fbdev-dma: Only set smem_start is enable per module option
f29fcfb 
commit d92a758 upstream.

Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().

Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.

[    3.536043] ------------[ cut here ]------------
[    3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[    3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[    3.565455] Modules linked in:
[    3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[    3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[    3.582452] Workqueue: events_unbound deferred_probe_work_func
[    3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.595233] pc : __virt_to_phys+0x68/0x98
[    3.599246] lr : __virt_to_phys+0x68/0x98
[    3.603276] sp : ffff800083603990
[    3.677939] Call trace:
[    3.680393]  __virt_to_phys+0x68/0x98
[    3.684067]  drm_fbdev_dma_helper_fb_probe+0x138/0x238
[    3.689214]  __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[    3.695385]  drm_fb_helper_initial_config+0x4c/0x68
[    3.700264]  drm_fbdev_dma_client_hotplug+0x8c/0xe0
[    3.705161]  drm_client_register+0x60/0xb0
[    3.709269]  drm_fbdev_dma_setup+0x94/0x148

Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().

Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reported-by: Peng Fan (OSS) <[email protected]>
Closes: https://lore.kernel.org/dri-devel/[email protected]/
Reported-by: Geert Uytterhoeven <[email protected]>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdX3N0szUvt1VTbroa2zrT1Nye_VzPb5qqCZ7z5gSm7HGw@mail.gmail.com/
Fixes: a51c766 ("drm/fb-helper: Consolidate CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM")
Tested-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: <[email protected]> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Jul 8, 2024
@gregkh
drm/fbdev-dma: Only set smem_start is enable per module option
00702cf 
commit d92a758 upstream.

Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().

Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.

[    3.536043] ------------[ cut here ]------------
[    3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[    3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[    3.565455] Modules linked in:
[    3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[    3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[    3.582452] Workqueue: events_unbound deferred_probe_work_func
[    3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.595233] pc : __virt_to_phys+0x68/0x98
[    3.599246] lr : __virt_to_phys+0x68/0x98
[    3.603276] sp : ffff800083603990
[    3.677939] Call trace:
[    3.680393]  __virt_to_phys+0x68/0x98
[    3.684067]  drm_fbdev_dma_helper_fb_probe+0x138/0x238
[    3.689214]  __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[    3.695385]  drm_fb_helper_initial_config+0x4c/0x68
[    3.700264]  drm_fbdev_dma_client_hotplug+0x8c/0xe0
[    3.705161]  drm_client_register+0x60/0xb0
[    3.709269]  drm_fbdev_dma_setup+0x94/0x148

Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().

Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reported-by: Peng Fan (OSS) <[email protected]>
Closes: https://lore.kernel.org/dri-devel/[email protected]/
Reported-by: Geert Uytterhoeven <[email protected]>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdX3N0szUvt1VTbroa2zrT1Nye_VzPb5qqCZ7z5gSm7HGw@mail.gmail.com/
Fixes: a51c766 ("drm/fb-helper: Consolidate CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM")
Tested-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: <[email protected]> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@DirtyJerz @popcornmix @jmdebruin