Keyboard: Add support for bpiphany's HID Liberation Device

keyboards/hid_liber/config.h

@@ -0,0 +1,170 @@
+/* Copyright 2012 Jun Wako <[email protected]>: Original Configuration
+ * Copyright 2018 bakageta <[email protected]>
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xB919
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    "bpiphany"
+#define USBSTR_MANUFACTURER 'b', '\x00', 'p', '\x00', 'i', '\x00', 'p', '\x00', 'h', '\x00', 'a', '\x00', 'n', '\x00', 'y', '\x00'
+#define PRODUCT         "HIDLiberation"
+#define USBSTR_PRODUCT 'H', '\x00', 'I', '\x00', 'D', '\x00', ' ', '\x00', 'L', '\x00', 'i', '\x00', 'b', '\x00', 'e', '\x00', 'r', '\x00', 'a', '\x00', 't', '\x00', 'i', '\x00', 'o', '\x00', 'n', '\x00'
+#define DESCRIPTION     "HID Liberation powered by QMK"
+
+/* key matrix size */
+#define MATRIX_ROWS 18
+#define MATRIX_COLS 8
+
+// HID Liberation Device uses custom matrix code to accomodate a 74HC238 3 to 8 decoder on pins B1, B2 and B3.
+#define DIODE_DIRECTION CUSTOM_MATRIX
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif

keyboards/hid_liber/hid_liber.c

@@ -0,0 +1,57 @@
+/* Copyright 2012 Jun Wako <[email protected]>: LED init
+ * Copyright 2017 Mathias Andersson <[email protected]>: Phantom config
+ * Copyright 2018 bakageta <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "hid_liber.h"
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    led_init_ports();
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+
+    return process_record_user(keycode, record);
+}
+
+void led_init_ports(void) {
+    DDRB |= (1<<5) | (1<<6); // OUT
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
+        PORTB &= ~(1<<5);
+    else
+        PORTB |= (1<<5);
+
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+        PORTB &= ~(1<<6);
+    else
+        PORTB |= (1<<6);
+
+    led_set_user(usb_led);
+}

keyboards/hid_liber/hid_liber.h

@@ -0,0 +1,75 @@
+/* Copyright 2011 Jun Wako <[email protected]>: Original TMK layout
+ * Copyright 2018 bakageta <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef HID_LIBER_H
+#define HID_LIBER_H
+
+#include "quantum.h"
+
+#define  ___ KC_NO
+
+/* Tenkeyless keyboard default layout, ISO & ANSI (ISO is between Left Shift
+ * and Z, and the ANSI \ key above Return/Enter is used for the additional ISO
+ * switch in the ASD row next to enter.  Use NUBS as keycode for the first and
+ * NUHS as the keycode for the second.
+ *
+ * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+ * `---'   `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------.
+ * |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |Ins|Hom|PgU|
+ * |-----------------------------------------------------------| |-----------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD|
+ * |-----------------------------------------------------------| `-----------'
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |              
+ * |-----------------------------------------------------------|     ,---.    
+ * |Shft|ISO|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |     |Up |    
+ * |-----------------------------------------------------------| ,-----------.
+ * |Ctl|Gui|Alt|          Space                |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
+ * `-----------------------------------------------------------' `-----------'
+ */
+#define LAYOUT( \
+    KG1,      KH7, KJ7, KJ6, KJ1, KO5, KL1, KA6, KA7, KD7, KD5, KD1, KD2,      KB5, KB3, KO3, \
+    KG7, KG5, KH5, KJ5, KI5, KI7, KK7, KK5, KL5, KA5, KC5, KC7, KL7, KD6,      KQ7, KN7, KM7, \
+    KG6, KG3, KH3, KJ3, KI3, KI6, KK6, KK3, KL3, KA3, KC3, KC6, KL6, KD4,      KP7, KN5, KM5, \
+    KH6, KG4, KH4, KJ4, KI4, KI1, KK1, KK4, KL4, KA4, KC4, KC1,      KD0,                     \
+    KF6, KH1, KG0, KH0, KJ0, KI0, KI2, KK2, KK0, KL0, KA0, KC2,      KF4,           KN1,      \
+    KO7, KE6, KB1,           KP1,                     KB2, KR4, KA2, KO0,      KN2, KP2, KQ2  \
+) { \
+/*           0     1     2     3     4     5     6     7  */ \
+/* A */   { KA0 , ___ , KA2 , KA3 , KA4 , KA5 , KA6 , KA7 }, \
+/* B */   { ___ , KB1 , KB2 , KB3 , ___ , KB5 , ___ , ___ }, \
+/* C */   { ___ , KC1 , KC2 , KC3 , KC4 , KC5 , KC6 , KC7 }, \
+/* D */   { KD0 , KD1 , KD2 , ___ , KD4 , KD5 , KD6 , KD7 }, \
+/* E */   { ___ , ___ , ___ , ___ , ___ , ___ , KE6 , ___ }, \
+/* F */   { ___ , ___ , ___ , ___ , KF4 , ___ , KF6 , ___ }, \
+/* G */   { KG0 , KG1 , ___ , KG3 , KG4 , KG5 , KG6 , KG7 }, \
+/* H */   { KH0 , KH1 , ___ , KH3 , KH4 , KH5 , KH6 , KH7 }, \
+/* I */   { KI0 , KI1 , KI2 , KI3 , KI4 , KI5 , KI6 , KI7 }, \
+/* J */   { KJ0 , KJ1 , ___ , KJ3 , KJ4 , KJ5 , KJ6 , KJ7 }, \
+/* K */   { KK0 , KK1 , KK2 , KK3 , KK4 , KK5 , KK6 , KK7 }, \
+/* L */   { KL0 , KL1 , ___ , KL3 , KL4 , KL5 , KL6 , KL7 }, \
+/* M */   { ___ , ___ , ___ , ___ , ___ , KM5 , ___ , KM7 }, \
+/* N */   { ___ , KN1 , KN2 , ___ , ___ , KN5 , ___ , KN7 }, \
+/* O */   { KO0 , ___ , ___ , KO3 , ___ , KO5 , ___ , KO7 }, \
+/* P */   { ___ , KP1 , KP2 , ___ , ___ , ___ , ___ , KP7 }, \
+/* Q */   { ___ , ___ , KQ2 , ___ , ___ , ___ , ___ , KQ7 }, \
+/* R */   { ___ , ___ , ___ , ___ , KR4 , ___ , ___ , ___ }  \
+}
+
+
+
+#endif

keyboards/hid_liber/keymaps/bakageta/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define PERMISSIVE_HOLD

keyboards/hid_liber/keymaps/bakageta/keymap.c

@@ -0,0 +1,89 @@
+/* Copyright 2017 Mathias Andersson <[email protected]>: Phantom Layout
+ * Copyright 2018 bakageta <[email protected]>: HID Liberation layouts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "hid_liber.h"
+
+// Helpful defines
+#define _______ KC_TRNS
+#define FN_CAPS LT(_FL, KC_CAPSLOCK)
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _BL 0 // Base Layer
+#define _GL 1 // Gaming Layer
+#define _FL 2 // Function Layer
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BL] = LAYOUT( \
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,       KC_PSCR, KC_SLCK, KC_BRK,  \
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,      KC_INS,  KC_HOME, KC_PGUP, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_DEL,  KC_END,  KC_PGDN, \
+        FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,                                  \
+        KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,               KC_UP,            \
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, TT(_FL), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT  \
+    ),
+    [_GL] = LAYOUT( \
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______, _______, _______, \
+        KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,                                 \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,               _______,          \
+        _______, KC_NO,   _______,                            _______,                            _______, _______, _______, _______,      _______, _______, _______  \
+    ),
+    [_FL] = LAYOUT( \
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______, _______, _______, \
+        _______, TO(_BL), TO(_GL), _______, _______, _______, _______, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______,      KC_VOLD, KC_MSTP, KC_VOLU, \
+        _______, _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PPLS, _______, _______, _______,      KC_MNXT, KC_MPLY, KC_MNXT, \
+        _______, _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, _______,          _______,                                 \
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PENT,          _______,               _______,          \
+        _______, _______, _______,                            KC_P0,                              KC_PDOT, KC_PENT, _______, _______,      _______, _______, _______  \
+    ),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+    switch(id) {
+        case 0:
+            if (record->event.pressed) {
+                register_code(KC_RSFT);
+            } else {
+                unregister_code(KC_RSFT);
+            }
+            break;
+    }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}