Adding new macro board called tapedeck

keyboards/tapedeck/config.h

@@ -0,0 +1,23 @@
+/*
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* SLIDER */
+#define POT_ENABLE
+
+/* RGB Default */
+# define RGB_MATRIX_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD
+

keyboards/tapedeck/info.json

@@ -0,0 +1,68 @@
+{
+    "manufacturer": "Gowla",
+    "keyboard_name": "Tapedeck",
+    "maintainer": "Gowla",
+    "development_board": "promicro",
+    "diode_direction": "ROW2COL",
+    "encoder": {
+        "rotary": [
+            {
+                "pin_a": "F4",
+                "pin_b": "F5"
+            },
+            {
+                "pin_a": "F6",
+                "pin_b": "F7"
+            }
+        ]
+    },
+    "features": {
+        "bootmagic": true,
+        "encoder": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "rgblight": true,
+    },
+    "matrix_pins": {
+        "cols": ["B5", "B4", "E6", "D7", "C6"],
+        "rows": ["B2", "B3", "B1"]
+    },
+    "rgblight": {
+        "led_count": 3,
+        "max_brightness": 225,
+        "pin": "B6",
+		"animations": {
+            "knight": true,
+            "rainbow_swirl": true,
+			"rainbow_mood": true,
+			"rgb_test": true
+        }
+    },
+    "url": "https://github.com/SamGowland/Gowla-Macro-Boards",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x0000",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "k00", "matrix": [0, 0], "x": 0, "y": 0 },
+                { "label": "k01", "matrix": [0, 1], "x": 1, "y": 0 },
+                { "label": "k02", "matrix": [0, 2], "x": 2, "y": 0 },
+                { "label": "k03", "matrix": [0, 3], "x": 3, "y": 0 },
+                { "label": "k04", "matrix": [0, 4], "x": 5, "y": 0.5 },
+                { "label": "k10", "matrix": [1, 0], "x": 0, "y": 1 },
+                { "label": "k11", "matrix": [1, 1], "x": 1, "y": 1 },
+                { "label": "k12", "matrix": [1, 2], "x": 2, "y": 1 },
+                { "label": "k13", "matrix": [1, 3], "x": 3, "y": 1 },
+                { "label": "k14", "matrix": [1, 4], "x": 5, "y": 1.75 },
+                { "label": "k20", "matrix": [2, 0], "x": 0, "y": 2 },
+                { "label": "k21", "matrix": [2, 1], "x": 1, "y": 2 },
+                { "label": "k22", "matrix": [2, 2], "x": 2, "y": 2 },
+                { "label": "k23", "matrix": [2, 3], "x": 3, "y": 2 }
+            ]
+        }
+    }
+}

keyboards/tapedeck/keymaps/default/keymap.c

@@ -0,0 +1,33 @@
+/* Copyright 2023 Gowla
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include QMK_KEYBOARD_H
+
+#define BASE 0 
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [BASE] = LAYOUT(
+        KC_ESC,            KC_MNXT,           KC_MPLY,     KC_MNXT, KC_MPLY,
+        RGB_MODE_RAINBOW,  RGB_MODE_RGBTEST,  RGB_M_K,     RGB_TOG, KC_MPLY,
+        KC_F1,             KC_F2,             KC_F3,       KC_F14
+    )
+};
+
+#ifdef ENCODER_MAP_ENABLE
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+    [BASE] = { ENCODER_CCW_CW(KC_WH_D, KC_WH_U), ENCODER_CCW_CW(KC_BRID, KC_BRIU) }
+};
+#endif

keyboards/tapedeck/keymaps/rules.mk

@@ -0,0 +1,4 @@
+# Build Options
+#   change yes to no to disable
+#
+ENCODER_MAP_ENABLE = yes

keyboards/tapedeck/readme.md

@@ -0,0 +1,33 @@
+# Gowla Tapedeck
+
+![Image of Tapedeck](https://i.ibb.co/R3JVMjM/tapedeck.jpg)
+
+4x4 12 Key Macro Board with 60MM Slider, RGB and 2 X Rotary Encoders. For use with QMK, designed and sold by Gowla.
+
+* Keyboard Maintainer: [Gowla](https://github.com/SamGowland/)
+* Hardware Supported: Pro Micro ATmega32U4, Cherry MX Switches, Alps 60MM Slider
+* Hardware Availability: [Repo](https://github.com/SamGowland/Gowla-Macro-Boards)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tapedeck:default
+
+Flashing example for this keyboard:
+
+    make tapedeck:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the top-left key (underneath the Pro Micro) and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving.
+* **Physical reset**: Remove the back plate and short the `RST` and `GND` pins on the Pro Micro.
+* **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-created keymaps, but you may assign this key in any keymaps you create.
+
+As a Pro Micro-compatible board, the Gowla Tapedeck uses `caterina` as its bootloader by default. Many popular Pro Micro alternatives like the Elite-C, Bit-C, Sea-Micro, Puchi-C etc should be flashed with a different bootloader such as `atmel-dfu`.
+
+If the incorrect bootloader is specified, bootmagic reset and the `QK_BOOT` keycode will not work.
+
+To avoid this problem, set the correct bootloader in your custom keymap's `rules.mk` file before compiling, or flash using an appropriate target (e.g. `make tapedeck:default:dfu`). See [flashing instructions and bootloader information](https://docs.qmk.fm/#/flashing) for more details.

keyboards/tapedeck/rules.mk

@@ -0,0 +1,4 @@
+# Build Options
+#   change yes to no to disable
+#
+QUANTUM_LIB_SRC += analog.c

keyboards/tapedeck/tapedeck.c

@@ -0,0 +1,86 @@
+/* Copyright 2023 Gowla
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+
+#ifdef POT_ENABLE
+  #include "analog.h"
+#endif
+
+int16_t pot_val = 0;
+int16_t prev_val = 0;
+int16_t val = 0;
+
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) {
+        return false;
+    }
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_WH_U);
+        } else {
+            tap_code(KC_WH_D);
+        }
+    } else if (index == 1) { /* Second encoder */
+        if (clockwise) {
+            tap_code(KC_BRIU);
+        } else {
+            tap_code(KC_BRID);
+        }
+    }
+    return true;
+}
+
+void keyboard_post_init_kb(void) {
+#ifdef POT_ENABLE
+    analogReference(ADC_REF_POWER);
+#endif
+    keyboard_post_init_user();
+}
+
+uint8_t divisor = 0;
+
+long map(long x, long in_min, long in_max, long out_min, long out_max)
+{
+  return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+}
+
+void slider(void) {
+    if (divisor++) { // only run the slider function 1/256 times it's called
+        return;
+    }
+
+    pot_val = analogReadPin(D4);
+	val = map(pot_val, 0, 1023, 1, 50);
+
+	if (( val > (prev_val + 1)) && val != prev_val){
+		int i;
+		for (i = prev_val; i < val; i++ )
+				{tap_code(KC_VOLU);}
+	}
+	if ((val  < (prev_val - 1)) && val != prev_val){
+		int i;
+		for (i = val; i < prev_val; i++ )
+				{tap_code(KC_VOLD);}
+	}
+	prev_val = val;
+}
+
+void housekeeping_task_kb(void) {
+#ifdef POT_ENABLE
+    slider();
+#endif
+}