[Keyboard] Add yandrstudio/nz67v2 keyboard.

keyboards/yandrstudio/nz64/readme.md

@@ -19,4 +19,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
 * **Physical reset pins**: Short circuit the `bt0` and `vcc` pins on the back of the PCB and plug in the keyboard
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.

keyboards/yandrstudio/nz67v2/board.h

@@ -0,0 +1,22 @@
+/* Copyright 2022 JasonRen(biu)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next "board.h"
+
+#undef STM32_HSECLK
+#define STM32_HSECLK 16000000

keyboards/yandrstudio/nz67v2/config.h

@@ -0,0 +1,109 @@
+/* Copyright 2022 JasonRen(biu)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_COL_PINS {  B9,  A3,  A4,  A5,  A6,  A7,  B0,  B2,  B10, B11, B12, B13, B14, B15, A8 }
+#define MATRIX_ROW_PINS {  B3,  B4,  B6,  B7,  B8 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define TAP_CODE_DELAY 15
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+#ifdef ENCODER_ENABLE
+
+#   define ENCODERS_PAD_A { A9 }
+#   define ENCODERS_PAD_B { A10 }
+
+#endif
+
+/* RGB Matrix */
+#ifdef RGB_MATRIX_ENABLE
+
+#    define RGB_DI_PIN B5
+#    define RGBLED_NUM 86
+#    define DRIVER_LED_TOTAL RGBLED_NUM
+
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180
+#    define RGBLIGHT_VAL_STEP 5
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED
+#    define RGB_MATRIX_CENTER { 112, 32 }
+#    define RGB_MATRIX_KEYPRESSES
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+
+#   define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#   define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#   define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#   define ENABLE_RGB_MATRIX_BREATHING
+#   define ENABLE_RGB_MATRIX_BAND_SAT
+#   define ENABLE_RGB_MATRIX_BAND_VAL
+#   define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#   define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#   define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#   define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#   define ENABLE_RGB_MATRIX_CYCLE_ALL
+#   define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#   define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#   define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#   define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#   define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#   define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#   define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#   define ENABLE_RGB_MATRIX_DUAL_BEACON
+#   define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#   define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#   define ENABLE_RGB_MATRIX_RAINDROPS
+#   define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#   define ENABLE_RGB_MATRIX_HUE_BREATHING
+#   define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#   define ENABLE_RGB_MATRIX_HUE_WAVE
+#   define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#   define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#   define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+/* enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined */
+#   define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#   define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+/* enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined */
+#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#   define ENABLE_RGB_MATRIX_SPLASH
+#   define ENABLE_RGB_MATRIX_MULTISPLASH
+#   define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#   define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+#    define WS2812_PWM_DRIVER PWMD3  // default: PWMD2
+#    define WS2812_PWM_CHANNEL 2  // default: 2
+#    define WS2812_DMA_STREAM STM32_DMA1_STREAM3  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_DMA_CHANNEL 3  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+
+#endif

keyboards/yandrstudio/nz67v2/halconf.h

@@ -0,0 +1,22 @@
+/* Copyright 2022 JasonRen(biu)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include_next <halconf.h>
+
+#undef HAL_USE_PWM
+#define HAL_USE_PWM TRUE
+