Add giabalanai keyboard

keyboards/giabalanai/config.h

@@ -0,0 +1,229 @@
+/*
+Copyright 2020 3araht
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0xF4B0
+#define DEVICE_VER   0x0001
+#define MANUFACTURER 3araht
+#define PRODUCT      giabalanai
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B5, B4, E6, D7, C6, D4 }
+#define MATRIX_COL_PINS { B1, F7, F6, F5, F4, B3, B2, B6, D0, D1 }
+#define MATRIX_ROW_PINS_RIGHT { D1, D0, D4, C6, D7, E6 }
+#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, C7, B7, F1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
+
+// Right side has to be the master since 1, LED data is output from right side, and 2, Audio pin is prepared on right side as a reserve.
+#define MASTER_RIGHT
+
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#ifdef RGBLIGHT_ENABLE
+
+#    define RGBLED_NUM 123
+// Do not define "RGBLED_SPLIT" since somehow it doesn't work well yet.
+// Even thhough "#define RGBLED_SPLIT { 60, 63 }" was set, LEDs on the sub keyboad side didn't turn on.
+// Not sure but rgblight_sethsv_at() might not support RGBLED_SPLIT yet.
+// Instead, LED data is tranferred from right side to the left via TRRS cable.
+
+#    define RGBLIGHT_LIMIT_VAL 100
+// #define RGBLIGHT_LAYERS
+
+#    ifndef HSV_BLACK
+#        define HSV_BLACK 0, 0, 0  // Define 'black' color, more like 'LED off' (H, S, V)
+#    endif
+
+// By default, LEDs of the buttons which are pressed turn on.
+// #    define RGBLIGHT_EFFECT_TWINKLE
+// #    define RGBLIGHT_EFFECT_KNIGHT
+
+
+// RGBLIGHT LED MAP
+//     Right 1st row (12 LEDs)
+//     ENCODER
+//     Right 2nd .. 5th row(13, 12, 13, 12 LEDs)
+//     Left 1st .. 5th row (12 LEDs x 5 rows)
+
+#define RGBLIGHT_LED_MAP { \
+   60,  61,  62,  63,  64,  65,  66,  67,  68,  69,  70,  71, \
+   97, \
+   84,  83,  82,  81,  80,  79,  78,  77,  76,  75,  74,  73,  72, \
+   85,  86,  87,  88,  89,  90,  91,  92,  93,  94,  95,  96, \
+   110, 109, 108, 107, 106, 105, 104, 103, 102, 101, 100, 99,  98, \
+   111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, \
+   \
+   11,  10,  9,   8,   7,   6,   5,   4,   3,   2,   1,   0,  \
+   12,  13,  14,  15,  16,  17,  18,  19,  20,  21,  22,  23, \
+   35,  34,  33,  32,  31,  30,  29,  28,  27,  26,  25,  24, \
+   36,  37,  38,  39,  40,  41,  42,  43,  44,  45,  46,  47, \
+   59,  58,  57,  56,  55,  54,  53,  52,  51,  50,  49,  48  \
+   }
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+// /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+// /* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
+
+/* Audio */
+#ifdef AUDIO_ENABLE
+#    define B5_AUDIO  // use EX1 = PB5 = PIN9 as Audio output
+// #define DAC_SAMPLE_MAX 32768U
+#    define DAC_SAMPLE_MAX 65535U
+// #define AUDIO_CLICKY
+#    define NO_MUSIC_MODE
+// #define STARTUP_SONG SONG(FANTASIE_IMPROMPTU)
+// #define STARTUP_SONG SONG(NOCTURNE_OP_9_NO_1)
+// #define STARTUP_SONG SONG(USSR_ANTHEM)
+// #define STARTUP_SONG SONG(CAMPANELLA)
+#endif
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+#ifdef MIDI_ENABLE
+#    define MIDI_ADVANCED
+#    define MIDI_TONE_KEYCODE_OCTAVES 5
+#endif  //  MIDI_ENABLE
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * Encoder options
+ */
+#ifdef ENCODER_ENABLE
+#    define ENCODERS_PAD_A { C7 }  // dummy
+#    define ENCODERS_PAD_B { B7 }  // dummy
+#    define ENCODERS_PAD_A_RIGHT { B4 }
+#    define ENCODERS_PAD_B_RIGHT { B6 }
+#    define ENCODER_RESOLUTION 4
+#    define TAP_CODE_DELAY 10
+#endif  // ENCODER_ENABLE

keyboards/giabalanai/giabalanai.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 3araht
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "giabalanai.h"

keyboards/giabalanai/giabalanai.h

@@ -0,0 +1,53 @@
+/* Copyright 2020 3araht
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    l00, l01, l02, l03, l04, l05, l06, l07, l08, l09, l0a, l0b, \
+    l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l1a, l1b, \
+    l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l2a, l2b, \
+    l30, l31, l32, l33, l34, l35, l36, l37, l38, l39, l3a, l3b, \
+    l40, l41, l42, l43, l44, l45, l46, l47, l48, l49, l4a, l4b, \
+    \
+    r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, r0a, r0b, renc, \
+    r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, r1a, r1b, r1c,  \
+    r20, r21, r22, r23, r24, r25, r26, r27, r28, r29, r2a, r2b, r2c   \
+) { \
+    { l00,   l10,  l20, l30, l40, l0b, l1b, l2b,   l3b,   l4b }, \
+    { l01,   l11,  l21, l31, l41, l0a, l1a, l2a,   l3a,   l4a }, \
+    { l02,   l12,  l22, l32, l42, l09, l19, l29,   l39,   l49 }, \
+    { l03,   l13,  l23, l33, l43, l08, l18, l28,   l38,   l48 }, \
+    { l04,   l14,  l24, l34, l44, l07, l17, l27,   l37,   l47 }, \
+    { l05,   l15,  l25, l35, l45, l06, l16, l26,   l36,   l46 }, \
+    \
+    { r00,   r01,  r02, r03, r04, r05, r06, KC_NO, KC_NO, KC_NO }, \
+    { r10,   r11,  r12, r13, r14, r15, r16, KC_NO, KC_NO, KC_NO }, \
+    { r20,   r21,  r22, r23, r24, r25, r26, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, renc, r0b, r0a, r09, r08, r07, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, r1c,  r1b, r1a, r19, r18, r17, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, r2c,  r2b, r2a, r29, r28, r27, KC_NO, KC_NO, KC_NO }  \
+}