deps: update npm to 5.5.1

Closes: #16280

PR-URL: #16509
Fixes: #14161
Reviewed-By: Daijiro Wachi <[email protected]>
Reviewed-By: Anna Henningsen <[email protected]>
Reviewed-By: Michaël Zasso <[email protected]>

deps/npm/.mailmap

@@ -32,6 +32,7 @@ Jake Verbaten <[email protected]>
 James Sanders <[email protected]>
 James Treworgy <[email protected]>
 Jason Smith <[email protected]>
+Joshua Bennett <[email protected]>
 Jonas Weber <[email protected]>
 Julien Meddah <[email protected]>
 Kevin Lorenz <[email protected]>

deps/npm/.travis.yml

@@ -25,9 +25,6 @@ matrix:
       script:
        - "standard"
        - "node . run tap -- \"test/tap/*.js\" \"test/broken-under-nyc/*.js\""
-before_install:
-  # required by test/tap/registry.js
-  - "mkdir -p /var/run/couchdb"
 notifications:
     slack: npm-inc:kRqQjto7YbINqHPb1X6nS3g8
 cache:

deps/npm/AUTHORS

@@ -424,7 +424,7 @@ Daniel Paz-Soldan <[email protected]>
 Sakthipriyan Vairamani <[email protected]>
 Zach Renner <[email protected]>
 Christopher Hiller <[email protected]>
-legodude17 <[email protected]>
+Joshua Bennett <[email protected]>
 Andrew Meyer <[email protected]>
 Michael Jasper <[email protected]>
 Max <[email protected]>
@@ -503,3 +503,26 @@ Sanketh Katta <[email protected]>
 Tim Needham <[email protected]>
 leonardo rojas <[email protected]>
 Mark Peter Fejes <[email protected]>
+Ryan Florence <[email protected]>
+MichaelQQ <[email protected]>
+Anders D. Johnson <[email protected]>
+Benjamin Fernandes <[email protected]>
+Simon Kurtz <[email protected]>
+David Goss <[email protected]>
+Luis Gustavo Pereira <[email protected]>
+Amos Wenger <[email protected]>
+Samuel Marks <[email protected]>
+Victor Travieso <[email protected]>
+legodude17 <[email protected]>
+Joshua Chaitin-Pollak <[email protected]>
+Brendan Warkentin <[email protected]>
+Scott Santucci <[email protected]>
+Xavier Cambar <[email protected]>
+Vikram <[email protected]>
+Igor Nadj <[email protected]>
+Tong Li <[email protected]>
+tripu <[email protected]>
+Carsten Brandt <[email protected]>
+Marcin Szczepanski <[email protected]>
+Josh Clow <[email protected]>
+Jakub Holy <[email protected]>

deps/npm/Makefile

@@ -88,12 +88,16 @@ doc-clean:
     html/doc \
     man
 
+## build-time tools for the documentation
+build-doc-tools := node_modules/.bin/marked \
+                   node_modules/.bin/marked-man
+
 # use `npm install marked-man` for this to work.
-man/man1/npm-README.1: README.md scripts/doc-build.sh package.json
+man/man1/npm-README.1: README.md scripts/doc-build.sh package.json $(build-doc-tools)
 	@[ -d man/man1 ] || mkdir -p man/man1
 	scripts/doc-build.sh $< $@
 
-man/man1/%.1: doc/cli/%.md scripts/doc-build.sh package.json
+man/man1/%.1: doc/cli/%.md scripts/doc-build.sh package.json $(build-doc-tools)
 	@[ -d man/man1 ] || mkdir -p man/man1
 	scripts/doc-build.sh $< $@
 
@@ -106,26 +110,26 @@ man/man5/npm-json.5: man/man5/package.json.5
 man/man5/npm-global.5: man/man5/npm-folders.5
 	cp $< $@
 
-man/man5/%.5: doc/files/%.md scripts/doc-build.sh package.json
+man/man5/%.5: doc/files/%.md scripts/doc-build.sh package.json $(build-doc-tools)
 	@[ -d man/man5 ] || mkdir -p man/man5
 	scripts/doc-build.sh $< $@
 
-doc/misc/npm-index.md: scripts/index-build.js package.json
+doc/misc/npm-index.md: scripts/index-build.js package.json $(build-doc-tools)
 	node scripts/index-build.js > $@
 
-html/doc/index.html: doc/misc/npm-index.md $(html_docdeps)
+html/doc/index.html: doc/misc/npm-index.md $(html_docdeps) $(build-doc-tools)
 	@[ -d html/doc ] || mkdir -p html/doc
 	scripts/doc-build.sh $< $@
 
-man/man7/%.7: doc/misc/%.md scripts/doc-build.sh package.json
+man/man7/%.7: doc/misc/%.md scripts/doc-build.sh package.json $(build-doc-tools)
 	@[ -d man/man7 ] || mkdir -p man/man7
 	scripts/doc-build.sh $< $@
 
-html/doc/README.html: README.md $(html_docdeps)
+html/doc/README.html: README.md $(html_docdeps) $(build-doc-tools)
 	@[ -d html/doc ] || mkdir -p html/doc
 	scripts/doc-build.sh $< $@
 
-html/doc/cli/%.html: doc/cli/%.md $(html_docdeps)
+html/doc/cli/%.html: doc/cli/%.md $(html_docdeps) $(build-doc-tools)
 	@[ -d html/doc/cli ] || mkdir -p html/doc/cli
 	scripts/doc-build.sh $< $@
 
@@ -135,11 +139,11 @@ html/doc/files/npm-json.html: html/doc/files/package.json.html
 html/doc/files/npm-global.html: html/doc/files/npm-folders.html
 	cp $< $@
 
-html/doc/files/%.html: doc/files/%.md $(html_docdeps)
+html/doc/files/%.html: doc/files/%.md $(html_docdeps) $(build-doc-tools)
 	@[ -d html/doc/files ] || mkdir -p html/doc/files
 	scripts/doc-build.sh $< $@
 
-html/doc/misc/%.html: doc/misc/%.md $(html_docdeps)
+html/doc/misc/%.html: doc/misc/%.md $(html_docdeps) $(build-doc-tools)
 	@[ -d html/doc/misc ] || mkdir -p html/doc/misc
 	scripts/doc-build.sh $< $@
 

deps/npm/README.md

@@ -141,12 +141,12 @@ you have chosen.
 
 ## More Docs
 
-Check out the [docs](https://docs.npmjs.com/),
+Check out the [docs](https://docs.npmjs.com/).
 
 You can use the `npm help` command to read any of them.
 
 If you're a developer, and you want to use npm to publish your program,
-you should [read this](https://docs.npmjs.com/misc/developers)
+you should [read this](https://docs.npmjs.com/misc/developers).
 
 ## BUGS
 

deps/npm/doc/cli/npm-access.md

@@ -60,6 +60,9 @@ You must have privileges to set the access of a package:
 * You have been given read-write privileges for a package, either as a member
   of a team or directly as an owner.
 
+If you have two-factor authentication enabled then you'll have to pass in an
+otp with `--otp` when making access changes.
+
 If your account is not paid, then attempts to publish scoped packages will fail
 with an HTTP 402 status code (logically enough), unless you use
 `--access=public`.

deps/npm/doc/cli/npm-config.md

@@ -6,7 +6,7 @@ npm-config(1) -- Manage the npm configuration files
     npm config set <key> <value> [-g|--global]
     npm config get <key>
     npm config delete <key>
-    npm config list [-l]
+    npm config list [-l] [--json]
     npm config edit
     npm get <key>
     npm set <key> <value> [-g|--global]
@@ -48,7 +48,8 @@ Echo the config value to stdout.
 
     npm config list
 
-Show all the config settings. Use `-l` to also show defaults.
+Show all the config settings. Use `-l` to also show defaults. Use `--json`
+to show the settings in json format.
 
 ### delete
 

deps/npm/doc/cli/npm-dist-tag.md

@@ -15,7 +15,9 @@ Add, remove, and enumerate distribution tags on a package:
 
 * add:
   Tags the specified version of the package with the specified tag, or the
-  `--tag` config if not specified.
+  `--tag` config if not specified. The tag you're adding is `latest` and you
+  have two-factor authentication on auth-and-writes then you'll need to include
+  an otp on the command line with `--otp`.
 
 * rm:
   Clear a tag that is no longer in use from the package.

deps/npm/doc/cli/npm-owner.md

@@ -27,6 +27,10 @@ Note that there is only one level of access.  Either you can modify a package,
 or you can't.  Future versions may contain more fine-grained access levels, but
 that is not implemented at this time.
 
+If you have two-factor authentication enabled with `auth-and-writes` then
+you'll need to include an otp on the command line when changing ownership
+with `--otp`.
+
 ## SEE ALSO
 
 * npm-publish(1)

deps/npm/doc/cli/npm-ping.md

@@ -8,6 +8,14 @@ npm-ping(1) -- Ping npm registry
 ## DESCRIPTION
 
 Ping the configured or given npm registry and verify authentication.
+If it works it will output something like:
+```
+Ping success: {*Details about registry*}
+```
+otherwise you will get:
+```
+Ping error: {*Detail about error}
+```
 
 ## SEE ALSO
 

deps/npm/doc/cli/npm-profile.md

@@ -0,0 +1,74 @@
+npm-profile(1) -- Change settings on your registry profile
+==========================================================
+
+## SYNOPSIS
+
+    npm profile get [--json|--parseable] [<property>]
+    npm profile set [--json|--parseable] <property> <value>
+    npm profile set password
+    npm profile enable-2fa [auth-and-writes|auth-only]
+    npm profile disable-2fa
+
+## DESCRIPTION
+
+Change your profile information on the registry.  This not be available if
+you're using a non-npmjs registry.
+
+* `npm profile get [<property>]`:
+  Display all of the properties of your profile, or one or more specific
+  properties.  It looks like:
+
+```
++-----------------+---------------------------+
+| name            | example                   |
++-----------------+---------------------------+
+| email           | [email protected] (verified) |
++-----------------+---------------------------+
+| two factor auth | auth-and-writes           |
++-----------------+---------------------------+
+| fullname        | Example User              |
++-----------------+---------------------------+
+| homepage        |                           |
++-----------------+---------------------------+
+| freenode        |                           |
++-----------------+---------------------------+
+| twitter         |                           |
++-----------------+---------------------------+
+| github          |                           |
++-----------------+---------------------------+
+| created         | 2015-02-26T01:38:35.892Z  |
++-----------------+---------------------------+
+| updated         | 2017-10-02T21:29:45.922Z  |
++-----------------+---------------------------+
+```
+
+* `npm profile set <property> <value>`:
+  Set the value of a profile property. You can set the following properties this way:
+    email, fullname, homepage, freenode, twitter, github
+
+* `npm profile set password`:
+  Change your password.  This is interactive, you'll be prompted for your
+  current password and a new password.  You'll also be prompted for an OTP
+  if you have two-factor authentication enabled.
+
+* `npm profile enable-2fa [auth-and-writes|auth-only]`:
+  Enables two-factor authentication. Defaults to `auth-and-writes` mode. Modes are:
+  * `auth-only`: Require an OTP when logging in or making changes to your
+    account's authentication.  The OTP will be required on both the website
+    and the command line.
+  * `auth-and-writes`: Requires an OTP at all the times `auth-only` does, and also requires one when
+    publishing a module, setting the `latest` dist-tag, or changing access
+    via `npm access` and `npm owner`.
+
+* `npm profile disable-2fa`:
+  Disables two-factor authentication.
+
+## DETAILS
+
+All of the `npm profile` subcommands accept `--json` and `--parseable` and
+will tailor their output based on those.  Some of these commands may not be
+available on non npmjs.com registries.
+
+## SEE ALSO
+
+* npm-config(7)

deps/npm/doc/cli/npm-publish.md

@@ -4,7 +4,7 @@ npm-publish(1) -- Publish a package
 
 ## SYNOPSIS
 
-    npm publish [<tarball>|<folder>] [--tag <tag>] [--access <public|restricted>]
+    npm publish [<tarball>|<folder>] [--tag <tag>] [--access <public|restricted>] [--otp otpcode]
 
     Publishes '.' if no argument supplied
     Sets tag 'latest' if no --tag specified
@@ -41,6 +41,11 @@ specifying a different default registry or using a `npm-scope(7)` in the name
   If you don't have a paid account, you must publish with `--access public`
   to publish scoped packages.
 
+* `[--otp <otpcode>]`
+  If you have two-factor authentication enabled in `auth-and-writes` mode
+  then you can provide a code from your authenticator with this. If you
+  don't include this and you're running from a TTY then you'll be prompted.
+
 Fails if the package name and version combination already exists in
 the specified registry.
 
@@ -65,3 +70,4 @@ packs them into a tarball to be uploaded to the registry.
 * npm-deprecate(1)
 * npm-dist-tag(1)
 * npm-pack(1)
+* npm-profile(1)

deps/npm/doc/cli/npm-run-script.md

@@ -27,7 +27,7 @@ and not to any pre or post script.
 
 The `env` script is a special built-in command that can be used to list
 environment variables that will be available to the script at runtime. If an
-"env" command is defined in your package it will take precedence over the
+"env" command is defined in your package, it will take precedence over the
 built-in.
 
 In addition to the shell's pre-existing `PATH`, `npm run` adds
@@ -38,7 +38,17 @@ you should write:
 
     "scripts": {"test": "tap test/\*.js"}
 
-instead of `"scripts": {"test": "node_modules/.bin/tap test/\*.js"}` to run your tests.
+instead of
+
+	"scripts": {"test": "node_modules/.bin/tap test/\*.js"}
+
+to run your tests.
+
+Scripts are run from the root of the module, regardless of what your current
+working directory is when you call `npm run`. If you want your script to
+use different behavior based on what subdirectory you're in, you can use the
+`INIT_CWD` environment variable, which holds the full path you were in when
+you ran `npm run`.
 
 `npm run` sets the `NODE` environment variable to the `node` executable with
 which `npm` is executed. Also, if the `--scripts-prepend-node-path` is passed,