Unstable packetdrill tests #26
Comments
|
the numbers in the "script packet" are not realistic, while the actual packet contains meaningful numbers. I suspect that the parser of DSS option has something bad in the packetdrill code (see dcaratti/packetdrill#12) |
|
(just to track the frequency, not to push, not to bring new info, I post here the error from yesterday's build) |
|
(just to track the frequency, not to push, not to bring new info, I post here the error from yesterday's build) |
|
@matttbe: while adding support for ADD_ADDR_V1, @malsbat found and fixed a bug that probably has something to do with the reported problem. With commit dcaratti/packetdrill@b3ef5ef , I fixed usage of |
|
I just got the same error: Can we add your fix in https://github.com/multipath-tcp/packetdrill ? :) |
|
(just to track the frequency, not to push, not to bring new info, I post here the error from yesterday's build) |
added , but I still see the problem. I fear that the time has come to check dcaratti/packetdrill#12 :) |
|
we are probably seeing a combination of bugs: |
|
@dcaratti : the CI reported this error during the WE: So you were right, there is another issue :-) |
|
(just to track the frequency, maybe some details (numbers) but not to push, not really to bring new info, I post here the error from today's build) |
|
(just to track the frequency, maybe some details (numbers) but not to push, not really to bring new info, I post here the error from today's build) |
|
I don't see it anymore after merge of @malsbat PR#6 . Since the problem is in MP_CAPABLE with data, it could be reconducted to commit: I'm not seeing the problem anymore after merge. @matttbe , can you please verify again? |
|
I did a few tests in my VM (100 iterations) and on my CI (10 iterations) and everything is OK! |
jenkins-tessares
pushed a commit
that referenced
this issue
Aug 3, 2020
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
Signed-off-by: Philippe Duplessis-Guindon <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Link: https://lore.kernel.org/linux-trace-devel/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Sep 7, 2020
Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d9950-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by: Rob Sherwood <[email protected]> Fixes: c0c050c ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Jun 19, 2021
[BUG] When running btrfs/027 with "-o compress" mount option, it always crashes with the following call trace: BTRFS critical (device dm-4): mapping failed logical 298901504 bio len 12288 len 8192 ------------[ cut here ]------------ kernel BUG at fs/btrfs/volumes.c:6651! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 31089 Comm: kworker/u24:10 Tainted: G OE 5.13.0-rc2-custom+ #26 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-delalloc btrfs_work_helper [btrfs] RIP: 0010:btrfs_map_bio.cold+0x58/0x5a [btrfs] Call Trace: btrfs_submit_compressed_write+0x2d7/0x470 [btrfs] submit_compressed_extents+0x3b0/0x470 [btrfs] ? mark_held_locks+0x49/0x70 btrfs_work_helper+0x131/0x3e0 [btrfs] process_one_work+0x28f/0x5d0 worker_thread+0x55/0x3c0 ? process_one_work+0x5d0/0x5d0 kthread+0x141/0x160 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 ---[ end trace 63113a3a91f34e68 ]--- [CAUSE] The critical message before the crash means we have a bio at logical bytenr 298901504 length 12288, but only 8192 bytes can fit into one stripe, the remaining 4096 bytes go to another stripe. In btrfs, all bios are properly split to avoid cross stripe boundary, but commit 764c7c9 ("btrfs: zoned: fix parallel compressed writes") changed the behavior for compressed writes. Previously if we find our new page can't be fitted into current stripe, ie. "submit == 1" case, we submit current bio without adding current page. submit = btrfs_bio_fits_in_stripe(page, PAGE_SIZE, bio, 0); page->mapping = NULL; if (submit || bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) { But after the modification, we will add the page no matter if it crosses stripe boundary, leading to the above crash. submit = btrfs_bio_fits_in_stripe(page, PAGE_SIZE, bio, 0); if (pg_index == 0 && use_append) len = bio_add_zone_append_page(bio, page, PAGE_SIZE, 0); else len = bio_add_page(bio, page, PAGE_SIZE, 0); page->mapping = NULL; if (submit || len < PAGE_SIZE) { [FIX] It's no longer possible to revert to the original code style as we have two different bio_add_*_page() calls now. The new fix is to skip the bio_add_*_page() call if @submit is true. Also to avoid @len to be uninitialized, always initialize it to zero. If @submit is true, @len will not be checked. If @submit is not true, @len will be the return value of bio_add_*_page() call. Either way, the behavior is still the same as the old code. Reported-by: Josef Bacik <[email protected]> Fixes: 764c7c9 ("btrfs: zoned: fix parallel compressed writes") Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Jul 24, 2021
To quote Alexey[1]:
I was adding custom tracepoint to the kernel, grabbed full F34 kernel
.config, disabled modules and booted whole shebang as VM kernel.
Then did
perf record -a -e ...
It crashed:
general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:t_show+0x22/0xd0
Then reproducer was narrowed to
# cat /sys/kernel/tracing/printk_formats
Original F34 kernel with modules didn't crash.
So I started to disable options and after disabling AFS everything
started working again.
The root cause is that AFS was placing char arrays content into a
section full of _pointers_ to strings with predictable consequences.
Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
CM_NAME macro.
Steps to reproduce:
CONFIG_AFS=y
CONFIG_TRACING=y
# cat /sys/kernel/tracing/printk_formats
Fix this by the following means:
(1) Add enum->string translation tables in the event header with the AFS
and YFS cache/callback manager operations listed by RPC operation ID.
(2) Modify the afs_cb_call tracepoint to print the string from the
translation table rather than using the string at the afs_call name
pointer.
(3) Switch translation table depending on the service we're being accessed
as (AFS or YFS) in the tracepoint print clause. Will this cause
problems to userspace utilities?
Note that the symbolic representation of the YFS service ID isn't
available to this header, so I've put it in as a number. I'm not sure
if this is the best way to do this.
(4) Remove the name wrangling (CM_NAME) macro and put the names directly
into the afs_call_type structs in cmservice.c.
Fixes: 8e8d7f1 ("afs: Add some tracepoints")
Reported-by: Alexey Dobriyan (SK hynix) <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Reviewed-by: Marc Dionne <[email protected]>
cc: Andrew Morton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]/
Link: https://lore.kernel.org/r/162430903582.2896199.6098150063997983353.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/ # v1 (repost)
Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/ # v2
matttbe
pushed a commit
that referenced
this issue
Aug 2, 2021
The memory reserved by console/PALcode or non-volatile memory is not added to memblock.memory. Since commit fa3354e (mm: free_area_init: use maximal zone PFNs rather than zone sizes) the initialization of the memory map relies on the accuracy of memblock.memory to properly calculate zone sizes. The holes in memblock.memory caused by absent regions reserved by the firmware cause incorrect initialization of struct pages which leads to BUG() during the initial page freeing: BUG: Bad page state in process swapper pfn:2ffc53 page:fffffc000ecf14c0 refcount:0 mapcount:1 mapping:0000000000000000 index:0x0 flags: 0x0() raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-03841-gfa3354e4ea39-dirty #26 fffffc0001b5bd68 fffffc0001b5be80 fffffc00011cd148 fffffc000ecf14c0 fffffc00019803df fffffc0001b5be80 fffffc00011ce340 fffffc000ecf14c0 0000000000000000 fffffc0001b5be80 fffffc0001b482c0 fffffc00027d6618 fffffc00027da7d0 00000000002ff97a 0000000000000000 fffffc0001b5be80 fffffc00011d1abc fffffc000ecf14c0 fffffc0002d00000 fffffc0001b5be80 fffffc0001b2350c 0000000000300000 fffffc0001b48298 fffffc0001b482c0 Trace: [<fffffc00011cd148>] bad_page+0x168/0x1b0 [<fffffc00011ce340>] free_pcp_prepare+0x1e0/0x290 [<fffffc00011d1abc>] free_unref_page+0x2c/0xa0 [<fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30 [<fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30 [<fffffc000101001c>] _stext+0x1c/0x20 Fix this by registering the reserved ranges in memblock.memory. Link: https://lore.kernel.org/lkml/20210726192311.uffqnanxw3ac5wwi@ivybridge Fixes: fa3354e ("mm: free_area_init: use maximal zone PFNs rather than zone sizes") Reported-by: Matt Turner <[email protected]> Cc: <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Matt Turner <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Nov 2, 2021
The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
jenkins-tessares
pushed a commit
that referenced
this issue
Jan 28, 2022
struct rpmsg_ctrldev contains a struct cdev. The current code frees the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_ctrldev could be freed before the cdev is entirely released, as in the backtrace below. [ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c [ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0 [ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v [ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26 [ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 93.730055] Workqueue: events kobject_delayed_cleanup [ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO) [ 93.740216] pc : debug_print_object+0x13c/0x1b0 [ 93.744890] lr : debug_print_object+0x13c/0x1b0 [ 93.749555] sp : ffffffacf5bc7940 [ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000 [ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000 [ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000 [ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0 [ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0 [ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0 [ 93.785814] x17: 0000000000000000 x16: dfffffd000000000 [ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c [ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000 [ 93.802244] x11: 0000000000000001 x10: 0000000000000000 [ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900 [ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000 [ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000 [ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001 [ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061 [ 93.835104] Call trace: [ 93.837644] debug_print_object+0x13c/0x1b0 [ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0 [ 93.846987] debug_check_no_obj_freed+0x18/0x20 [ 93.851669] slab_free_freelist_hook+0xbc/0x1e4 [ 93.856346] kfree+0xfc/0x2f4 [ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8 [ 93.864445] device_release+0x84/0x168 [ 93.868310] kobject_cleanup+0x12c/0x298 [ 93.872356] kobject_delayed_cleanup+0x10/0x18 [ 93.876948] process_one_work+0x578/0x92c [ 93.881086] worker_thread+0x804/0xcf8 [ 93.884963] kthread+0x2a8/0x314 [ 93.888303] ret_from_fork+0x10/0x18 The cdev_device_add/del() API was created to address this issue (see commit '233ed09d7fda ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19 ("rpmsg: Driver for user space endpoint interface") Signed-off-by: Sujit Kautkar <[email protected]> Signed-off-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/20220110104706.v6.1.Iaac908f3e3149a89190ce006ba166e2d3fd247a3@changeid
jenkins-tessares
pushed a commit
that referenced
this issue
Feb 25, 2022
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.
[ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called
[ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called
...
[ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
crash> bt
...
PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd"
...
#9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
[exception RIP: dma_pool_alloc+0x1ab]
RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046
RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090
RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00
R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0
R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
#11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
#12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
#13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
#14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
#15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
#16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
#17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
#18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
#19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
#20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
#21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
#22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
#23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
#24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
#25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
#26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92
crash> net_device.state ffff89443b0c0000
state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER)
To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: suresh kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Mar 23, 2022
Add test for percpu btf_type_tag. Similar to the "user" tag, we test the following cases: 1. __percpu struct field. 2. __percpu as function parameter. 3. per_cpu_ptr() accepts dynamically allocated __percpu memory. Because the test for "user" and the test for "percpu" are very similar, a little bit of refactoring has been done in btf_tag.c. Basically, both tests share the same function for loading vmlinux and module btf. Example output from log: > ./test_progs -v -t btf_tag libbpf: prog 'test_percpu1': BPF program load failed: Permission denied libbpf: prog 'test_percpu1': -- BEGIN PROG LOAD LOG -- ... ; g = arg->a; 1: (61) r1 = *(u32 *)(r1 +0) R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0 ... test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec #26/6 btf_tag/btf_type_tag_percpu_mod1:OK libbpf: prog 'test_percpu2': BPF program load failed: Permission denied libbpf: prog 'test_percpu2': -- BEGIN PROG LOAD LOG -- ... ; g = arg->p->a; 2: (61) r1 = *(u32 *)(r1 +0) R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0 ... test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec #26/7 btf_tag/btf_type_tag_percpu_mod2:OK libbpf: prog 'test_percpu_load': BPF program load failed: Permission denied libbpf: prog 'test_percpu_load': -- BEGIN PROG LOAD LOG -- ... ; g = (__u64)cgrp->rstat_cpu->updated_children; 2: (79) r1 = *(u64 *)(r1 +48) R1 is ptr_cgroup_rstat_cpu access percpu memory: off=48 ... test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_load 0 nsec #26/8 btf_tag/btf_type_tag_percpu_vmlinux_load:OK load_btfs:PASS:could not load vmlinux BTF 0 nsec test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu 0 nsec test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_helper 0 nsec #26/9 btf_tag/btf_type_tag_percpu_vmlinux_helper:OK Signed-off-by: Hao Luo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
matttbe
pushed a commit
that referenced
this issue
Nov 14, 2022
The following panic is observed when bringing up (veth_open) a veth device that has an XDP program attached. [ 61.519185] kernel BUG at net/core/dev.c:6442! [ 61.519456] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 61.519752] CPU: 0 PID: 408 Comm: ip Tainted: G W 6.1.0-rc2-185930-gd9095f92950b-dirty #26 [ 61.520288] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 61.520806] RIP: 0010:napi_enable+0x3d/0x40 [ 61.521077] Code: f6 f6 80 61 08 00 00 02 74 0d 48 83 bf 88 01 00 00 00 74 03 80 cd 01 48 89 d0 f0 48 0f b1 4f 10 48 39 c2 75 c8 c3 cc cc cc cc <0f> 0b 90 48 8b 87 b0 00 00 00 48 81 c7 b0 00 00 00 45 31 c0 48 39 [ 61.522226] RSP: 0018:ffffbc9800cc36f8 EFLAGS: 00010246 [ 61.522557] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000001 [ 61.523004] RDX: 0000000000000010 RSI: ffffffff8b0de852 RDI: ffff9f03848e5000 [ 61.523452] RBP: 0000000000000000 R08: 0000000000000800 R09: 0000000000000000 [ 61.523899] R10: ffff9f0384a96800 R11: ffffffffffa48061 R12: ffff9f03849c3000 [ 61.524345] R13: 0000000000000300 R14: ffff9f03848e5000 R15: 0000001000000100 [ 61.524792] FS: 00007f58cb64d2c0(0000) GS:ffff9f03bbc00000(0000) knlGS:0000000000000000 [ 61.525301] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 61.525673] CR2: 00007f6cc629b498 CR3: 000000010498c000 CR4: 00000000000006f0 [ 61.526121] Call Trace: [ 61.526284] <TASK> [ 61.526425] __veth_napi_enable_range+0xd6/0x230 [ 61.526723] veth_enable_xdp+0xd0/0x160 [ 61.526969] veth_open+0x2e/0xc0 [ 61.527180] __dev_open+0xe2/0x1b0 [ 61.527405] __dev_change_flags+0x1a1/0x210 [ 61.527673] dev_change_flags+0x1c/0x60 This happens because we are calling veth_napi_enable() on already enabled queues. The root cause is in commit 2e0de63 changed the control logic dropping this case, if (priv->_xdp_prog) { err = veth_enable_xdp(dev); if (err) return err; - } else if (veth_gro_requested(dev)) { + /* refer to the logic in veth_xdp_set() */ + if (!rtnl_dereference(peer_rq->napi)) { + err = veth_napi_enable(peer); + if (err) + return err; + } so that now veth_napi_enable is called if the peer has not yet initialiazed its peer_rq->napi. The issue is this will happen even if the NIC is not up. Then in veth_enable_xdp just above we have similar path, veth_enable_xdp napi_already_on = (dev->flags & IFF_UP) && rcu_access_pointer(rq->napi) err = veth_enable_xdp_range(dev, 0, dev->real_num_rx_queues, napi_already_on); The trouble is an xdp prog is assigned before bringing the device up each of the veth_open path will enable the peers xdp napi structs. But then when we bring the peer up it will similar try to enable again because from veth_open the IFF_UP flag is not set until after the op in __dev_open so we believe napi_alread_on = false. To fix this just drop the IFF_UP test and rely on checking if the napi struct is enabled. This also matches the peer check in veth_xdp for disabling. To reproduce run ./test_xdp_meta.sh I found adding Cilium/Tetragon tests for XDP. Fixes: 2e0de63 ("veth: Avoid drop packets when xdp_redirect performs") Signed-off-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Jan 29, 2023
Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer. Fixes: f9d690b ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
May 26, 2023
The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Sep 5, 2023
Commit bf5c25d ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags. Fixes: bf5c25d ("skbuff: in skb_segment, call zerocopy functions once per nskb") Signed-off-by: Mohamed Khalfella <[email protected]> Reported-by: Amit Goyal <[email protected]> Cc: [email protected] Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Sep 18, 2023
The KASAN stack instrumentation when CONFIG_KASAN_STACK is true poisons the stack of a function when it is entered and unpoisons it when leaving. However, in the case of bpf_throw, we will never return as we switch our stack frame to the BPF exception callback. Later, this discrepancy will lead to confusing KASAN splats when kernel resumes execution on return from the BPF program. Fix this by unpoisoning everything below the stack pointer of the BPF program, which should cover the range that would not be unpoisoned. An example splat is below: BUG: KASAN: stack-out-of-bounds in stack_trace_consume_entry+0x14e/0x170 Write of size 8 at addr ffffc900013af958 by task test_progs/227 CPU: 0 PID: 227 Comm: test_progs Not tainted 6.5.0-rc2-g43f1c6c9052a-dirty #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-2.fc39 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x670 ? arch_stack_walk+0x79/0x100 kasan_report+0xda/0x110 ? stack_trace_consume_entry+0x14e/0x170 ? stack_trace_consume_entry+0x14e/0x170 ? __pfx_stack_trace_consume_entry+0x10/0x10 stack_trace_consume_entry+0x14e/0x170 ? __sys_bpf+0xf2e/0x41b0 arch_stack_walk+0x8b/0x100 ? __sys_bpf+0xf2e/0x41b0 ? bpf_prog_test_run_skb+0x341/0x1c70 ? bpf_prog_test_run_skb+0x341/0x1c70 stack_trace_save+0x9b/0xd0 ? __pfx_stack_trace_save+0x10/0x10 ? __kasan_slab_free+0x109/0x180 ? bpf_prog_test_run_skb+0x341/0x1c70 ? __sys_bpf+0xf2e/0x41b0 ? __x64_sys_bpf+0x78/0xc0 ? do_syscall_64+0x3c/0x90 ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 kasan_save_stack+0x33/0x60 ? kasan_save_stack+0x33/0x60 ? kasan_set_track+0x25/0x30 ? kasan_save_free_info+0x2b/0x50 ? __kasan_slab_free+0x109/0x180 ? kmem_cache_free+0x191/0x460 ? bpf_prog_test_run_skb+0x341/0x1c70 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x50 __kasan_slab_free+0x109/0x180 kmem_cache_free+0x191/0x460 bpf_prog_test_run_skb+0x341/0x1c70 ? __pfx_bpf_prog_test_run_skb+0x10/0x10 ? __fget_light+0x51/0x220 __sys_bpf+0xf2e/0x41b0 ? __might_fault+0xa2/0x170 ? __pfx___sys_bpf+0x10/0x10 ? lock_release+0x1de/0x620 ? __might_fault+0xcd/0x170 ? __pfx_lock_release+0x10/0x10 ? __pfx_blkcg_maybe_throttle_current+0x10/0x10 __x64_sys_bpf+0x78/0xc0 ? syscall_enter_from_user_mode+0x20/0x50 do_syscall_64+0x3c/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f0fbb38880d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f3 45 12 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe13907de8 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 00007ffe13908708 RCX: 00007f0fbb38880d RDX: 0000000000000050 RSI: 00007ffe13907e20 RDI: 000000000000000a RBP: 00007ffe13907e00 R08: 0000000000000000 R09: 00007ffe13907e20 R10: 0000000000000064 R11: 0000000000000206 R12: 0000000000000003 R13: 0000000000000000 R14: 00007f0fbb532000 R15: 0000000000cfbd90 </TASK> The buggy address belongs to stack of task test_progs/227 KASAN internal error: frame info validation failed; invalid marker: 0 The buggy address belongs to the virtual mapping at [ffffc900013a8000, ffffc900013b1000) created by: kernel_clone+0xcd/0x600 The buggy address belongs to the physical page: page:00000000b70f4332 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11418f flags: 0x2fffe0000000000(node=0|zone=2|lastcpupid=0x7fff) page_type: 0xffffffff() raw: 02fffe0000000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900013af800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffc900013af880: 00 00 00 f1 f1 f1 f1 00 00 00 f3 f3 f3 f3 f3 00 >ffffc900013af900: 00 00 00 00 00 00 00 00 00 00 00 f1 00 00 00 00 ^ ffffc900013af980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffc900013afa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Disabling lock debugging due to kernel taint Cc: Andrey Ryabinin <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Andrey Konovalov <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Vincenzo Frascino <[email protected]> Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Acked-by: Andrey Konovalov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
jenkins-tessares
pushed a commit
that referenced
this issue
Sep 22, 2023
The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Nov 28, 2023
As of commit b92143d ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Dec 19, 2023
With previous patch, one of subtests in test_btf_id becomes flaky and may fail. The following is a failing example: Error: #26 btf Error: #26/174 btf/BTF ID Error: #26/174 btf/BTF ID btf_raw_create:PASS:check 0 nsec btf_raw_create:PASS:check 0 nsec test_btf_id:PASS:check 0 nsec ... test_btf_id:PASS:check 0 nsec test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1 The test tries to prove a btf_id not available after the map is closed. But btf_id is freed only after workqueue and a rcu grace period, compared to previous case just after a rcu grade period. Depending on system workload, workqueue could take quite some time to execute function bpf_map_free_deferred() which may cause the test failure. Instead of adding arbitrary delays, let us remove the logic to check btf_id availability after map is closed. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Nov 12, 2024
Syzkaller reported this warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x1c5/0x1e0 Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00 RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206 RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007 RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00 RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007 R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00 R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78 FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x88/0x130 ? inet_sock_destruct+0x1c5/0x1e0 ? report_bug+0x18e/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x1c5/0x1e0 __sk_destruct+0x2a/0x200 rcu_do_batch+0x1aa/0x530 ? rcu_do_batch+0x13b/0x530 rcu_core+0x159/0x2f0 handle_softirqs+0xd3/0x2b0 ? __pfx_smpboot_thread_fn+0x10/0x10 run_ksoftirqd+0x25/0x30 smpboot_thread_fn+0xdd/0x1d0 kthread+0xd3/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- Its possible that two threads call tcp_v6_do_rcv()/sk_forward_alloc_add() concurrently when sk->sk_state == TCP_LISTEN with sk->sk_lock unlocked, which triggers a data-race around sk->sk_forward_alloc: tcp_v6_rcv tcp_v6_do_rcv skb_clone_and_charge_r sk_rmem_schedule __sk_mem_schedule sk_forward_alloc_add() skb_set_owner_r sk_mem_charge sk_forward_alloc_add() __kfree_skb skb_release_all skb_release_head_state sock_rfree sk_mem_uncharge sk_forward_alloc_add() sk_mem_reclaim // set local var reclaimable __sk_mem_reclaim sk_forward_alloc_add() In this syzkaller testcase, two threads call tcp_v6_do_rcv() with skb->truesize=768, the sk_forward_alloc changes like this: (cpu 1) | (cpu 2) | sk_forward_alloc ... | ... | 0 __sk_mem_schedule() | | +4096 = 4096 | __sk_mem_schedule() | +4096 = 8192 sk_mem_charge() | | -768 = 7424 | sk_mem_charge() | -768 = 6656 ... | ... | sk_mem_uncharge() | | +768 = 7424 reclaimable=7424 | | | sk_mem_uncharge() | +768 = 8192 | reclaimable=8192 | __sk_mem_reclaim() | | -4096 = 4096 | __sk_mem_reclaim() | -8192 = -4096 != 0 The skb_clone_and_charge_r() should not be called in tcp_v6_do_rcv() when sk->sk_state is TCP_LISTEN, it happens later in tcp_v6_syn_recv_sock(). Fix the same issue in dccp_v6_do_rcv(). Suggested-by: Eric Dumazet <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Fixes: e994b2f ("tcp: do not lock listener to process SYN packets") Signed-off-by: Wang Liang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello,
I just noticed that in the recent builds from my CI, packetdrill tests were unstable: sometimes OK, sometimes not. Always the same error:
So far, I cannot reproduce it locally.
The text was updated successfully, but these errors were encountered: