v1.10

What's Changed

• Fix comment in AnkerMake.ini by @JaredTamana in #15
• add ABL restore to the Cura machine start gcode by @imadcat in #16
• add M420 S1; to prusa slicer by @just-trey in #17
• update read me and file name by @just-trey in #18

New Contributors

• @JaredTamana made their first contribution in #15
• @imadcat made their first contribution in #16

Full Changelog: v1.9...v1.10

v1.9

Version 1.9

Cura Profile Changes

• Reset xy_offset_layer_0 to default to fix issue when using a brim
• Added max acceleration speed logic

Prusa Slicer Profile Changes

• Add a 0.6 nozzle profile

Other changes

• Fix typo in Cura readme.md

v1.8

• Cura Profile Changes
  • none
• Prusa Slicer Profile Changes
  • Disabled "Thick bridges" to improve the quality on shorter bridges
• Other changes
  • Migration from Google doc to GitHub repo for Prusa Slicer documentation and simplified install instructions and fixed nested directories in zip
  • Added required licenses
  • Added Repo Base Readme to point to both profile instructions
  • moved the changelog to its dedicated file
  • merged Prusa Slicer and Cura changelogs into one for ease of tracking

v1.7

This change only contains changes for the Cura Profile:

• Significant quality updates based on feedback from @Tenson_UK
  • For the normal profile, set the first layer height to match the rest of the print. (0.2)
  • Set "Initial Layer Horizontal Expansion" and "Hole Horizontal Expansion" to improve quality
  • Set "Top/Bottom Thickness" to improve quality
  • Changed infill logic to increase infill speeds.
    • NOTE: Part strength is slightly weaker, so adjust as needed.
  • Changed print temperature logic for more consistency
  • Changed "Top/Bottom Flow" and "Initial Layer Flow" to improve print quality
  • Set "Combing Mode" to "Within Infill" to reduce the number of retractions.
  • Complete rework of support settings that provides easy removal and good part support.
    • NOTE: Tree supports have no optimization at this time.
  • Adjusted the following experimental settings to improve print quality.
    • "Overhanging Wall Angle"
    • "Overhanging Wall Speed
    • "Small Hole Max Size"
    • "Small Feature Initial Layer Speed"
• Regrouping/ordering of overrides to match base setting order

Full Changelog: v1.5...v1.7

v1.5

add back in "extruder_nr": { "default_value": 0 }, to pass unit test and fix bug.

Full Changelog: v1.4...v1.5

v1.4

Update and migration of everything to GitHub.

Full Changelog: v4.1-alpha...v1.4