Bugfix 2.0.x (#16)

* 🐛 Fix Artillery Ruby (startup code, build flags) (MarlinFirmware#23446) * 🎨 Misc. cleanup, comments * 📺 Tune ULTI_CONTROLLER encoder, enable PCA9632 (MarlinFirmware#23461) * 🌐 Localize E3V2 Enhanced UI (MarlinFirmware#23424) * 📌 LCD_FOR_MELZI for BTT E3 RRF (MarlinFirmware#23453) * [cron] Bump distribution date (2022-01-07) * [cron] Bump distribution date (2022-01-08) * 🚸 Do G34 "Z Backoff" at full current * [cron] Bump distribution date (2022-01-09) * 🔨 Get FIRMWARE_BIN from env * ✨ Firmware Upload via Binary Transfer (MarlinFirmware#23462) * 🩹 Reset DWIN CrealityUI print progress on start (MarlinFirmware#23481) * 🐛 Fix EEPROM_INIT_NOW build hash test (MarlinFirmware#23479) * 🚸 BLTouch HS menu item for DWIN Enhanced UI (MarlinFirmware#23480) * 🔨 Rename (not copy) with board_build.rename * 📌 Improve Longer3D fan PWM (MarlinFirmware#23477) * 🌐 Update Slovak language (MarlinFirmware#23475) * 🚑️ Fix preheat target bug Fixes Jyers#1651 * 🌐 Update auto home axis strings * [cron] Bump distribution date (2022-01-10) * 🚸 Include extra axes in position report (MarlinFirmware#23490) * 🧑‍💻 Fewer string macros * 🎨 Followup to MarlinFirmware#23462 * 🩹 Fix some logical axis usage * 🚸 Wait for cooldown in MarlinUI power-off (MarlinFirmware#23476) * [cron] Bump distribution date (2022-01-11) * 📝 kHz => KHz * 🧑‍💻 Adjust FastIO AVR timer enums, macros * 🎨 Misc. spindle/laser adjustments * [cron] Bump distribution date (2022-01-12) * 💡 Misc. cleanup, comments * 🧑‍💻 Move PB0 init for MKS_ROBIN_NANO * 🐛 Fix Arduino build issues (MarlinFirmware#23510) * 🚑️ Fix M105 regression (MarlinFirmware#23505) Fixes MarlinFirmware#23504 * 🐛 Fix SHOW_REMAINING_TIME compile (MarlinFirmware#23503) * 🚸 Fix E3V2 Enhanced UI time labels (MarlinFirmware#23502) * 📝 KHz => kHz (MarlinFirmware#23512) * 🐛 Fix, improve PWM on AVR (MarlinFirmware#23463) * [cron] Bump distribution date (2022-01-13) * [cron] Bump distribution date (2022-01-14) * 🧑‍💻 Misc. updates for extra axes (MarlinFirmware#23521) * 🩹 Followup to extra axes * 🔨 Set upload_command for CHEETAH v20 (MarlinFirmware#23515) * 🔧 Skip unused axis names * [cron] Bump distribution date (2022-01-15) * [cron] Bump distribution date (2022-01-16) * 🐛 Fix, improve PWM on AVR (MarlinFirmware#23520) * ⚡️ SPI+DMA+interrupt method (STM32 / MKS UI) (MarlinFirmware#23464) * ✨ Z Offset Wizard for TFT_LVGL_UI (English) (MarlinFirmware#23489) * 🩹 Fan speed followup * 💄 MarlinUI+DOGM leveled bed bitmaps (MarlinFirmware#23539) * 🐛 Fix PLR for E3V2 Enhanced UI (MarlinFirmware#23543) * 🐛 Fix Ultimain 2 E-autofan pin mapping (MarlinFirmware#23466) * 🐛 Finish and organize temp sensors (MarlinFirmware#23519) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2022-01-17) * 🚸 Suppressible pin warnings (MarlinFirmware#23530) Co-authored-by: Scott Lahteine <[email protected]> * 💄 Improve Ender3 v2 DWIN MarlinUI (MarlinFirmware#23369) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2022-01-18) * ✨ Long filename open/create/write (MarlinFirmware#23526) Co-authored-by: Scott Lahteine <[email protected]> * 🔨 Suppressible CONFIGURATION_EMBEDDING warning (MarlinFirmware#23545) * 💥 Generalize extra debugging * 🐛 Fix Octopus v1.x probe pin (MarlinFirmware#23548) * 🐛 Fix RAMPS 1.4 Plus EXP headers (MarlinFirmware#23523) * 📌 RAMPS AUX 1-2 headers (MarlinFirmware#23544) * [cron] Bump distribution date (2022-01-19) * 🐛 Fix conditional M81 suicide (MarlinFirmware#23549) * 🎨 Misc. style and cleanup * 🎨 LCD_SCREEN_ROT_* => LCD_SCREEN_ROTATE * 📝 Tweak G26 Q description * 🩹 Fix Robin Nano BOARD_INIT * 🧑‍💻 Add chmod to mfprep * [cron] Bump distribution date (2022-01-20) * 🩹 BOARD_INIT followup * 🩹 Fix power.h compile (MarlinFirmware#23573) * [cron] Bump distribution date (2022-01-21) * ♻️ Adjust LCD init, contrast default, settings load * 🐛 Fix LCD contrast/brightness init (MarlinFirmware#23567) Co-authored-by: Scott Lahteine <[email protected]> * 🧑‍💻 Fix up some AUX / EXP pins (MarlinFirmware#23577) * [cron] Bump distribution date (2022-01-22) * 🔨 Creality RCT6 (256K) variants (MarlinFirmware#23599) Co-authored-by: Scott Lahteine <[email protected]> * 🩹 Fix DWIN float debugging (MarlinFirmware#23601) * 🐛 Fix Creality DWIN LCD with SKR Mini E3 V3 (MarlinFirmware#23593) * 🐛 Fix DGUS_Reloaded G-code execution (MarlinFirmware#23592) * ⚡️ Tuned Thermistor 66 (T-D500) (MarlinFirmware#23585) * [cron] Bump distribution date (2022-01-25) * 🧑‍💻 HAS_MARLINUI_MENU, HAS_MANUAL_MOVE_MENU * ✏️ Fix MKS enum * ✅ FYSETC TFT81050 CI Test (MarlinFirmware#23604) * ✨ BOARD_CREALITY_V24S1_301 (MarlinFirmware#23620) Co-Authored-By: Miguel Risco-Castillo <[email protected]> * [cron] Bump distribution date (2022-01-26) * 🚸 Better "Bed Tramming Done" dialog (MarlinFirmware#23616) Co-authored-by: Scott Lahteine <[email protected]> * 📝 Update Creality 4.2.2 driver warning * 🐛 Fix SPI DMA and default mode (MarlinFirmware#23627) Followup to MarlinFirmware#23464 * [cron] Bump distribution date (2022-01-27) * 🧑‍💻 Simplify Fast PWM timer macros * [cron] Bump distribution date (2022-01-28) * 🐛 Fix EZBoard V2 timer conflict (MarlinFirmware#23648) * 🐛 Fix AVR 644/1284 Timer / PWM conflicts (MarlinFirmware#23629) * 🐛 Fix FYSETC S6, S6 V2 Serial RX pins (MarlinFirmware#23642) * [cron] Bump distribution date (2022-01-30) * 🐛 Fix EZBoard V2 Environment for OpenBLT (MarlinFirmware#23659) * [cron] Bump distribution date (2022-02-01) * 🐛 Fix M852 report (MarlinFirmware#23660) * 🔧 Board temp sensor check * 🚸 Case Light, LED menus for E3V2 DWIN Enhanced UI (MarlinFirmware#23590) * [cron] Bump distribution date (2022-02-02) * 🐛 Creality v4 cleanup, pin correction (MarlinFirmware#23666) * 🔧 Sanity-check AVR D9 Fan PWM / SPEAKER Timer2 (MarlinFirmware#23672) * [cron] Bump distribution date (2022-02-04) * 💡 Comment variant timers * 🍻 STM32 set_pwm_duty "on/off" for digital pins (MarlinFirmware#23665) * 🐛 Fix RUMBA + MKS Mini12864 Neopixel pin (MarlinFirmware#23646) * 🧑‍💻 Relocate a variant * ✨ Add ZRIB v53, patch G35 Z drop, related issues (MarlinFirmware#23636) * 📌 Distinct BOARD_CREALITY_V422 (MarlinFirmware#23674) * [cron] Bump distribution date (2022-02-05) * ✨ SAMD51 Bricolemon / Bricolemon Lite boards (MarlinFirmware#23658) * 🐛 Fix Index Mobo Rev03 upload (MarlinFirmware#23676) * 🩹 Init brightness/contrast later (MarlinFirmware#23645) * 🚨 Deprecate Maple build (MarlinFirmware#23661) * 🩹 Prevent Z error with UBL + Park unscaled E move (MarlinFirmware#23568) * 🐛 Fix dual MAX31865 initialization issues (MarlinFirmware#23496) * 🔨 Clean up upload.py (MarlinFirmware#23679) * 🚸 Enhanced UI => Professional UI - with updates (MarlinFirmware#23624) * 🐛 Fix missing u8g_esp32_spi (MarlinFirmware#23562) * [cron] Bump distribution date (2022-02-06) * 🐛 Fix init of delta safe height (for G29, G33, etc.) (MarlinFirmware#23622) * [cron] Bump distribution date (2022-02-07) * 🧑‍💻 Generic Maple STM32F103RC envs for devs (MarlinFirmware#23686) * 🚨 Cleaner errors for renamed envs (MarlinFirmware#23690) * 🩹 Fix Maple HAL compile errors (MarlinFirmware#23685) * PLR accessors for Ext UI (MarlinFirmware#23687) * [cron] Bump distribution date (2022-02-08) * 🔧 Update MIXING_EXTRUDER sanity checks Fixing MarlinFirmware#23693 * ✨ Optional HOST_STATUS_NOTIFICATIONS (MarlinFirmware#22833) * 🧑‍💻 Drop hostui.flag * [cron] Bump distribution date (2022-02-09) * 🚸 Restore active tool after ABL G29 (MarlinFirmware#23692) Co-authored-by: Scott Lahteine <[email protected]> * 🚸 Fix, Improve Power-Loss Recovery (MarlinFirmware#22828) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2022-02-10) * 🐛 Fix XYZEval::set(XY, Z) and (XY, Z, E) (MarlinFirmware#23704) Fix regression in MarlinFirmware#21953 Co-authored-by: Scott Lahteine <[email protected]> * 🩹 Simplify quick homing feedrate (MarlinFirmware#23714) Co-authored-by: Scott Lahteine <[email protected]> * 🧑‍💻 Wrap MMU1 pins * ✨ Pxmalion Core i3 (MarlinFirmware#23711) * 🎨 Misc. DGUS cleanup * [cron] Bump distribution date (2022-02-11) * 💥 Change 'M42 M' to 'M42 T' * 🚸 Align MKS UI heated bed status with HAS_MULTI_HOTEND (MarlinFirmware#23718) * ✏️ Fix E3V2 display with BTT SKR Mini E3 v3 (MarlinFirmware#23719) * ✨ More Nozzle Park move options (MarlinFirmware#23158) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2022-02-12) * 🔧 HAS_LCDPRINT conditional * 📝 Update conditionals descriptions * ♻️ No ui.reinit_lcd on any ExtUI (MarlinFirmware#23722) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2022-02-14) * 🐛 Fix XATC divide-by-zero (MarlinFirmware#23743) * ♻️ Rename XATC z_values => z_offset * [cron] Bump distribution date (2022-02-16) * 🧑‍💻 Update MightyBoard FET pins (MarlinFirmware#23728) * [cron] Bump distribution date (2022-02-17) * 🐛 Patch Creality RAMPS FET / FAN pins Improvement for multi-hotend setup by TH3D. * [cron] Bump distribution date (2022-02-18) * 🐛 Fix HAS_TMC26X feature path (MarlinFirmware#23757) * 🚨 Fix TEMP_SENSOR_BOARD warnings (MarlinFirmware#23754) * ✏️ Fix getLFNName parameter (MarlinFirmware#23752) * ♻️ Refactor HAL as singleton (MarlinFirmware#23357) * [cron] Bump distribution date (2022-02-19) * 📌 Creality RAMPS optional SD_DETECT_PIN (MarlinFirmware#23740) Co-authored-by: Scott Lahteine <[email protected]> * ⚡️ Apply PTC on all probing (MarlinFirmware#23764) Co-authored-by: Scott Lahteine <[email protected]> * 📝 Update Toolchange FS comments * ✨ Dyze Design PT100 Amplifier Board (MarlinFirmware#23760) * 🔧 Warning for MK3_FAN_PINS (MarlinFirmware#23727) * 🔨 Workspace file with recommendation * 🐛 Fix TMC26X CS pins init (MarlinFirmware#23778) * 🐛 Ibid. * [cron] Bump distribution date (2022-02-22) * 🔨 More renamed.ini envs (MarlinFirmware#23786) * [cron] Bump distribution date (2022-02-23) * 🎨 Move PROPORTIONAL_FONT_RATIO * [cron] Bump distribution date (2022-02-25) * 🐛 Fix steps-to-mm with backlash (MarlinFirmware#23814) Co-authored-by: Scott Lahteine <[email protected]> * 🐛 ESP32 _delay_ms, fix u8g_esp32_spi.cpp (MarlinFirmware#23810) * ✨ MKS Robin Nano 3.1 (MarlinFirmware#23795) * 📺 BTT SKR Mini E3 with Fysetc V2.1 / MKS V3 / BTT V1 Mini 12864 (MarlinFirmware#23793) * 🔧 SHOW_CUSTOM_BOOTSCREEN sanity-check (MarlinFirmware#23807) * ✨ LCD Backlight Timer (MarlinFirmware#23768) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2022-02-27) * ✨ M21 P / S / U - Select Volume (MarlinFirmware#23780) Co-authored-by: Scott Lahteine <[email protected]> * [cron] Bump distribution date (2022-02-28) * 🌐 Update German language (MarlinFirmware#23832) * 🔨 Fix 'renamed' env (platform = ststm32) (MarlinFirmware#23831) * 🐛 Fix backlash applied steps when config changes (MarlinFirmware#23826) Followup to MarlinFirmware#23814 * 🚨 Fix BLTouch 5V pin tolerance checks (MarlinFirmware#23823) * ⚡️ E3V2 blank bg for S1 compatibility (MarlinFirmware#23822) * ✨ Weedo 62A Tina2 / Monoprice Cadet (MarlinFirmware#23817) * [cron] Bump distribution date (2022-03-02) * 🐛 Fix M_State_grbl when G29 calls G28 * 🚸 Universal X_AXIS_TWIST_COMPENSATION (MarlinFirmware#23828) * 🚸 Use Z_STEPPER_ALIGN_STEPPER_XY to enable * ⚡️ Use seen_test in `M422` * [cron] Bump distribution date (2022-03-03) * 🚸 12345.6 num-to-string * 🩹 Improve and apply XATC reset() (MarlinFirmware#23840) * 🐛 Emergency Parser with STM32 Mass Storage (MarlinFirmware#23827) * 🔧 Mark Thermal Variance Monitor EXPERIMENTAL * ✏️ num-to-string followup * [cron] Bump distribution date (2022-03-05) * 🚸 TH3D EZBoard V2 TMC slave addresses (MarlinFirmware#23857) * 🚸 Improve M422 error messages * 🩹 Fix 'hdsl' warning * [cron] Bump distribution date (2022-03-11) * 🔧 DWIN_CREALITY_LCD_ENHANCED => DWIN_LCD_PROUI Followup to MarlinFirmware#23624 * 📝 Update laser/spindle docs link (MarlinFirmware#23886) * 🐛 Fix UI include Followup to ~2 * fix g29 (MarlinFirmware#23887) * 🚸 Update Ender3 V2/S1 Pro UI (MarlinFirmware#23878) * 🐛 Restore STM32 / STM32F1 12-bit ADC (MarlinFirmware#23871) * 🚸 Fix, extend X Axis Twist Compensation (MarlinFirmware#23745) Co-authored-by: Scott Lahteine <[email protected]> * 📌 Fix, extend Index Rev03 Mobo (MarlinFirmware#23851) Co-authored-by: Scott Lahteine <[email protected]> * 🚸 M401 H - Report BLTouch HS State (MarlinFirmware#23724) * 🧑‍💻 STM32G0Bx : Use PLLQ for USB clock (MarlinFirmware#23870) * [cron] Bump distribution date (2022-03-12) * 🧑‍💻 Add ExtUI::onLevelingDone, match DWIN to ExtUI * 🐛 Fix UBL 'G29 Q1' bug * 🌐 Fix, add some menu labels (MarlinFirmware#23895) * 🧑‍💻 Add standard BUZZ types * 🩹 Fix FSTR / PSTR usage * 🐛 Fix Chiron new TFT SD print after reset (MarlinFirmware#23855) * 🔨 Drop extraneous build flag (MarlinFirmware#23862) * [cron] Bump distribution date (2022-03-13) * ⚡️ G12 - Only require used axes to be homed (MarlinFirmware#23422) Co-authored-by: Scott Lahteine <[email protected]> * 🚸 Test LIN_ADVANCE in a pins file * 📝 Fix DEFAULT_DUAL_X_CARRIAGE_MODE comment * 📝 Fix X2_MAX_POS comment (MarlinFirmware#23873) * 🩹 Fix ExtUI build with Host Keepalive disabled (MarlinFirmware#23898) * 🐛 Fix STM32F1 HAL build (MarlinFirmware#23897) Followup to MarlinFirmware#23357 * 🧑‍💻 Allow DIGIPOT Rsx / Vrefmax override (MarlinFirmware#23885) * 🩹 Fix DWIN E3V2 display issues by allowing re-init (MarlinFirmware#23879) * [cron] Bump distribution date (2022-03-14) * 🐛 MKS TinyBee - 2.5V ADC Vref (MarlinFirmware#23903) * [cron] Bump distribution date (2022-03-18) * 🩹 Fix redundant var declaration (MarlinFirmware#23913) * ⚡️ Fix noisy ADC - 16x oversampling with 12-bit ADC (MarlinFirmware#23867) * 🩹 Fix xatc EEPROM debug (MarlinFirmware#23911) * ✨ ESP32 - Hardware PWM for fan, cutter, servos (MarlinFirmware#23802) * 📌 PandaPi V2.9 – Standalone mode (MarlinFirmware#23908) * [cron] Bump distribution date (2022-03-19) * ✏️ Misc. cleanup * ✨ Encoder button noise filter (MarlinFirmware#23925) * [cron] Bump distribution date (2022-03-21) Co-authored-by: Kyle Hu <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Anson Liu <[email protected]> Co-authored-by: Lefteris Garyfalakis <[email protected]> Co-authored-by: jdegenstein <[email protected]> Co-authored-by: ClockeNessMnstr <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: GHGiampy <[email protected]> Co-authored-by: Miguel Risco-Castillo <[email protected]> Co-authored-by: Tanguy Pruvot <[email protected]> Co-authored-by: Roman Moravčík <[email protected]> Co-authored-by: David Ross Smith <[email protected]> Co-authored-by: DerAndere <[email protected]> Co-authored-by: mistic100 <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: Jim Watson <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Mike La Spina <[email protected]> Co-authored-by: George Fu <[email protected]> Co-authored-by: Sola <[email protected]> Co-authored-by: A. Herlas <[email protected]> Co-authored-by: Taylor Talkington <[email protected]> Co-authored-by: zerkix <[email protected]> Co-authored-by: John Lagonikas <[email protected]> Co-authored-by: Salvatore Bramante <[email protected]> Co-authored-by: Fahad Alduraibi <[email protected]> Co-authored-by: DejitaruJin <[email protected]> Co-authored-by: Lars <[email protected]> Co-authored-by: Timofey Titovets <[email protected]> Co-authored-by: Timothy Hoogland <[email protected]> Co-authored-by: Maeyanie <[email protected]> Co-authored-by: Bob Kuhn <[email protected]> Co-authored-by: Bones <[email protected]> Co-authored-by: Bruno Henrique de Paula <[email protected]> Co-authored-by: Kelroy <[email protected]> Co-authored-by: Stephen Hawes <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: MOHAMMAD RASIM <[email protected]> Co-authored-by: Mads Ynddal <[email protected]> Co-authored-by: espr14 <[email protected]> Co-authored-by: Thomas White <[email protected]> Co-authored-by: John Robertson <[email protected]> Co-authored-by: Giuseppe499 <[email protected]> Co-authored-by: Simon Pilepich <[email protected]> Co-authored-by: jefflessard <[email protected]> Co-authored-by: tombrazier <[email protected]> Co-authored-by: sam <[email protected]> Co-authored-by: M. FURIC Franck <[email protected]> Co-authored-by: kisslorand <[email protected]> Co-authored-by: Ludy <[email protected]> Co-authored-by: Julien Staub <[email protected]> Co-authored-by: Jack Wilsdon <[email protected]> Co-authored-by: GatCode <[email protected]> Co-authored-by: BIGTREETECH <[email protected]> Co-authored-by: Nick <[email protected]> Co-authored-by: Mathew Winters <[email protected]> Co-authored-by: Mrnt <[email protected]> Co-authored-by: Jelmer van der Stel <[email protected]> Co-authored-by: Mark <[email protected]> Co-authored-by: Fredrik Andersson <[email protected]>
just-trey · Mar 22, 2022 · 5d38f8b · 5d38f8b
1 parent 4a840e1
commit 5d38f8b
Show file tree

Hide file tree

Showing 892 changed files with 27,182 additions and 11,753 deletions.
diff --git a/.github/workflows/test-builds.yml b/.github/workflows/test-builds.yml
@@ -66,7 +66,7 @@ jobs:
         - mks_robin_lite_maple
         - mks_robin_pro_maple
         #- mks_robin_nano35_maple
-        #- STM32F103RET6_creality_maple
+        #- STM32F103RE_creality_maple
         - STM32F103VE_ZM3E4V2_USB_maple
 
         # STM32 (ST) Environments
@@ -75,7 +75,7 @@ jobs:
         #- STM32F103RC_btt_USB
         - STM32F103RE_btt
         - STM32F103RE_btt_USB
-        - STM32F103RET6_creality
+        - STM32F103RE_creality
         - STM32F103VE_longer
         - STM32F407VE_black
         - STM32F401VE_STEVAL

diff --git a/.gitignore b/.gitignore
@@ -22,6 +22,10 @@
 # Generated files
 _Version.h
 bdf2u8g
+marlin_config.json
+mczip.h
+*.gen
+*.sublime-workspace
 
 #
 # OS
@@ -37,7 +41,6 @@ applet/
 *.rej
 *.bak
 *.idea
-*.s
 *.i
 *.ii
 *.swp
@@ -137,20 +140,19 @@ __vm/
 vc-fileutils.settings
 
 # Visual Studio Code
-.vscode
-.vscode/.browse.c_cpp.db*
-.vscode/c_cpp_properties.json
-.vscode/launch.json
-.vscode/*.db
+.vscode/*
+!.vscode/extensions.json
 
 #Simulation
 imgui.ini
 eeprom.dat
+spi_flash.bin
 
 #cmake
 CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt
+build/
 
 # CLion
 cmake-build-*

diff --git a/.vscode/extensions.json b/.vscode/extensions.json
@@ -0,0 +1,11 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "marlinfirmware.auto-build",
+        "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -94,6 +94,11 @@
 
 // @section machine
 
+// Choose the name from boards.h that matches your setup
+#ifndef MOTHERBOARD
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
+#endif
+
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -137,11 +142,6 @@
 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// Choose the name from boards.h that matches your setup
-#ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_14_EFB
-#endif
-
 // Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
@@ -371,8 +371,12 @@
   //#define PS_OFF_SOUND            // Beep 1s when power off
   #define PSU_ACTIVE_STATE LOW      // Set 'LOW' for ATX, 'HIGH' for X-Box
 
-  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
-  //#define PSU_POWERUP_DELAY 250   // (ms) Delay for the PSU to warm up to full power
+  //#define PSU_DEFAULT_OFF               // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY      250    // (ms) Delay for the PSU to warm up to full power
+  //#define LED_POWEROFF_TIMEOUT 10000    // (ms) Turn off LEDs after power-off, with this amount of delay
+
+  //#define POWER_OFF_TIMER               // Enable M81 D<seconds> to power off after a delay
+  //#define POWER_OFF_WAIT_FOR_COOLDOWN   // Enable M81 S to power off only after cooldown
 
   //#define PSU_POWERUP_GCODE  "M355 S1"  // G-code to run after power-on (e.g., case light on)
   //#define PSU_POWEROFF_GCODE "M355 S0"  // G-code to run before power-off (e.g., case light off)
@@ -384,12 +388,14 @@
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN
     #define AUTO_POWER_COOLER_FAN
-    //#define AUTO_POWER_E_TEMP        50 // (°C) Turn on PSU if any extruder is over this temperature
-    //#define AUTO_POWER_CHAMBER_TEMP  30 // (°C) Turn on PSU if the chamber is over this temperature
-    //#define AUTO_POWER_COOLER_TEMP   26 // (°C) Turn on PSU if the cooler is over this temperature
     #define POWER_TIMEOUT              30 // (s) Turn off power if the machine is idle for this duration
     //#define POWER_OFF_DELAY          60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
   #endif
+  #if EITHER(AUTO_POWER_CONTROL, POWER_OFF_WAIT_FOR_COOLDOWN)
+    //#define AUTO_POWER_E_TEMP        50 // (°C) PSU on if any extruder is over this temperature
+    //#define AUTO_POWER_CHAMBER_TEMP  30 // (°C) PSU on if the chamber is over this temperature
+    //#define AUTO_POWER_COOLER_TEMP   26 // (°C) PSU on if the cooler is over this temperature
+  #endif
 #endif
 
 //===========================================================================
@@ -431,6 +437,9 @@
  *     5 : 100kΩ  ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
  *   501 : 100kΩ  Zonestar - Tronxy X3A
  *   502 : 100kΩ  Zonestar - used by hot bed in Zonestar Průša P802M
+ *   503 : 100kΩ  Zonestar (Z8XM2) Heated Bed thermistor
+ *   504 : 100kΩ  Zonestar P802QR2 (Part# QWG-104F-B3950) Hotend Thermistor
+ *   505 : 100kΩ  Zonestar P802QR2 (Part# QWG-104F-3950) Bed Thermistor
  *   512 : 100kΩ  RPW-Ultra hotend
  *     6 : 100kΩ  EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
  *     7 : 100kΩ  Honeywell 135-104LAG-J01
@@ -450,6 +459,7 @@
  *    61 : 100kΩ  Formbot/Vivedino 350°C Thermistor - beta 3950
  *    66 : 4.7MΩ  Dyze Design High Temperature Thermistor
  *    67 : 500kΩ  SliceEngineering 450°C Thermistor
+ *    68 : PT100 amplifier board from Dyze Design
  *    70 : 100kΩ  bq Hephestos 2
  *    75 : 100kΩ  Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
  *  2000 : 100kΩ  Ultimachine Rambo TDK NTCG104LH104KT1 NTC100K motherboard Thermistor
@@ -756,6 +766,7 @@
 //#define COREZX
 //#define COREZY
 //#define MARKFORGED_XY  // MarkForged. See https://reprap.org/forum/read.php?152,504042
+//#define MARKFORGED_YX
 
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER
@@ -1088,6 +1099,17 @@
  */
 //#define BLTOUCH
 
+/**
+ * MagLev V4 probe by MDD
+ *
+ * This probe is deployed and activated by powering a built-in electromagnet.
+ */
+//#define MAGLEV4
+#if ENABLED(MAGLEV4)
+  //#define MAGLEV_TRIGGER_PIN 11     // Set to the connected digital output
+  #define MAGLEV_TRIGGER_DELAY 15     // Changing this risks overheating the coil
+#endif
+
 /**
  * Touch-MI Probe by hotends.fr
  *
@@ -1836,6 +1858,7 @@
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
   //#define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
+  //#define EEPROM_INIT_NOW   // Init EEPROM on first boot after a new build.
 #endif
 
 //
@@ -1891,8 +1914,7 @@
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z_raise }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
-  //#define NOZZLE_PARK_X_ONLY          // X move only is required to park
-  //#define NOZZLE_PARK_Y_ONLY          // Y move only is required to park
+  #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
@@ -2458,6 +2480,11 @@
 //#define FYSETC_MINI_12864_2_1    // Type A/B. NeoPixel RGB Backlight
 //#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.
 
+//
+// BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight.
+//
+//#define BTT_MINI_12864_V1
+
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/32833148327.html
@@ -2780,7 +2807,7 @@
 // Ender-3 v2 OEM display. A DWIN display with Rotary Encoder.
 //
 //#define DWIN_CREALITY_LCD           // Creality UI
-//#define DWIN_CREALITY_LCD_ENHANCED  // Enhanced UI
+//#define DWIN_LCD_PROUI              // Pro UI by MRiscoC
 //#define DWIN_CREALITY_LCD_JYERSUI   // Jyers UI by Jacob Myers
 //#define DWIN_MARLINUI_PORTRAIT      // MarlinUI (portrait orientation)
 //#define DWIN_MARLINUI_LANDSCAPE     // MarlinUI (landscape orientation)
@@ -2793,7 +2820,7 @@
   #define BUTTON_DELAY_EDIT  50 // (ms) Button repeat delay for edit screens
   #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
 
-  //#define TOUCH_IDLE_SLEEP 300 // (secs) Turn off the TFT backlight if set (5mn)
+  //#define TOUCH_IDLE_SLEEP 300 // (s) Turn off the TFT backlight if set (5mn)
 
   #define TOUCH_SCREEN_CALIBRATION
 
@@ -2819,6 +2846,11 @@
 //#define REPRAPWORLD_KEYPAD
 //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
 
+//
+// EasyThreeD ET-4000+ with button input and status LED
+//
+//#define EASYTHREED_UI
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@@ -2829,9 +2861,6 @@
 // :[1,2,3,4,5,6,7,8]
 //#define NUM_M106_FANS 1
 
-// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
-//#define FAST_PWM_FAN
-
 // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
 // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
 // is too low, you should also increment SOFT_PWM_SCALE.