Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Probe pin in sensor connector is the same of BLTOUCH #23548

Merged
merged 4 commits into from
Jan 18, 2022
Merged

Probe pin in sensor connector is the same of BLTOUCH #23548

merged 4 commits into from
Jan 18, 2022

Conversation

salva00
Copy link
Contributor

@salva00 salva00 commented Jan 17, 2022

I've notice, while I've been trying to add an induction probe to my btt octopus, that on board' pinout the sensor probe signal pin is PB7 instead of PC5
sensorPin

@thisiskeithb
Copy link
Member

The pins file was setup this way due to the Octopus design/intended use.

You’re expected to use PC5 when using an NPN/PNP sensor and PB7 when using a BLTouch.

@salva00
Copy link
Contributor Author

salva00 commented Jan 17, 2022 •
edited
Loading

PC5 is referred as a pin in btt octopus Pro board. In the v1 version it is not mentioned in user manual and, as you can see, neither in J40 (in the first image). On Pro board pinout there is PC5 instead of PB7:
ProSensorPin
:

@thisiskeithb
Copy link
Member

PC5 is referred as a pin in btt octopus Pro board.

The old pins block should be moved instead of deleted since this PR is for the common pins file.

@salva00
Copy link
Contributor Author

salva00 commented Jan 18, 2022

So I should move the PB7 pin to octopus v1/v1.1 header?

@thinkyhead
Copy link
Member

Please clarify. From comments above it sounds like it should be:

  • Octopus V1.0 ………… BLTouch: PB7, else: PC5 (proximity)
  • Octopus V1.1 ………… Always PB7
  • Octopus Pro V1.0 …… Always PC5

@salva00
Copy link
Contributor Author

salva00 commented Jan 18, 2022

As user manual describes :

  • Octopus V1.0 ..... Always: PB7
  • Octopus V1.1 ..... Always: PB7
  • Octopus Pro V1.0 ..... BLTouch: PB7 , other probes: PC5

@thinkyhead thinkyhead merged commit df69d72 into MarlinFirmware:bugfix-2.0.x Jan 18, 2022
just-trey added a commit to just-trey/Marlin that referenced this pull request Mar 22, 2022
@just-trey @gzhuli
@thinkyhead @ansonl @lefterisgar @jdegenstein @ClockeNessMnstr @GHGiampy @mriscoc @tpruvot @rmoravcik @DragRedSim @DerAndere1 @mistic100 @ellensp @jwrw @thisiskeithb @descipher @GerogeFu @solawc @protektwar @The-EG @zerkix @zeleps @salva00 @fduraibi @DejitaruJin @LMoesman @nefelim4ag @Maeyanie @Bob-the-Kuhn @SidSkiba @brunohenriquy @kelroy1990 @sphawes @InsanityAutomation @moham96 @Baekalfen @espr14 @TomW1605 @HoverClub @Giuseppe499 @sobil @jefflessard @tombrazier @minteyay @francknos @kisslorand @Ludy87 @atsju @jackwilsdon @bigtreetech @SwiftNick @mwinters-stuff @Mrnt @steljwagh @markniu @Na1w
Bugfix 2.0.x (#16)
5d38f8b 
* 🐛 Fix Artillery Ruby (startup code, build flags) (MarlinFirmware#23446)

* 🎨 Misc. cleanup, comments

* 📺 Tune ULTI_CONTROLLER encoder, enable PCA9632 (MarlinFirmware#23461)

* 🌐 Localize E3V2 Enhanced UI (MarlinFirmware#23424)

* 📌 LCD_FOR_MELZI for BTT E3 RRF (MarlinFirmware#23453)

* [cron] Bump distribution date (2022-01-07)

* [cron] Bump distribution date (2022-01-08)

* 🚸 Do G34 "Z Backoff" at full current

* [cron] Bump distribution date (2022-01-09)

* 🔨 Get FIRMWARE_BIN from env

* ✨ Firmware Upload via Binary Transfer (MarlinFirmware#23462)

* 🩹 Reset DWIN CrealityUI print progress on start (MarlinFirmware#23481)

* 🐛 Fix EEPROM_INIT_NOW build hash test (MarlinFirmware#23479)

* 🚸 BLTouch HS menu item for DWIN Enhanced UI (MarlinFirmware#23480)

* 🔨 Rename (not copy) with board_build.rename

* 📌 Improve Longer3D fan PWM (MarlinFirmware#23477)

* 🌐 Update Slovak language (MarlinFirmware#23475)

* 🚑️ Fix preheat target bug

Fixes Jyers#1651

* 🌐 Update auto home axis strings

* [cron] Bump distribution date (2022-01-10)

* 🚸 Include extra axes in position report (MarlinFirmware#23490)

* 🧑‍💻 Fewer string macros

* 🎨 Followup to MarlinFirmware#23462

* 🩹 Fix some logical axis usage

* 🚸 Wait for cooldown in MarlinUI power-off (MarlinFirmware#23476)

* [cron] Bump distribution date (2022-01-11)

* 📝 kHz => KHz

* 🧑‍💻 Adjust FastIO AVR timer enums, macros

* 🎨 Misc. spindle/laser adjustments

* [cron] Bump distribution date (2022-01-12)

* 💡 Misc. cleanup, comments

* 🧑‍💻 Move PB0 init for MKS_ROBIN_NANO

* 🐛 Fix Arduino build issues (MarlinFirmware#23510)

* 🚑️ Fix M105 regression (MarlinFirmware#23505)

Fixes MarlinFirmware#23504

* 🐛 Fix SHOW_REMAINING_TIME compile (MarlinFirmware#23503)

* 🚸 Fix E3V2 Enhanced UI time labels (MarlinFirmware#23502)

* 📝 KHz => kHz (MarlinFirmware#23512)

* 🐛 Fix, improve PWM on AVR (MarlinFirmware#23463)

* [cron] Bump distribution date (2022-01-13)

* [cron] Bump distribution date (2022-01-14)

* 🧑‍💻 Misc. updates for extra axes (MarlinFirmware#23521)

* 🩹 Followup to extra axes

* 🔨 Set upload_command for CHEETAH v20 (MarlinFirmware#23515)

* 🔧 Skip unused axis names

* [cron] Bump distribution date (2022-01-15)

* [cron] Bump distribution date (2022-01-16)

* 🐛 Fix, improve PWM on AVR (MarlinFirmware#23520)

* ⚡️ SPI+DMA+interrupt method (STM32 / MKS UI) (MarlinFirmware#23464)

* ✨ Z Offset Wizard for TFT_LVGL_UI (English) (MarlinFirmware#23489)

* 🩹 Fan speed followup

* 💄 MarlinUI+DOGM leveled bed bitmaps (MarlinFirmware#23539)

* 🐛 Fix PLR for E3V2 Enhanced UI (MarlinFirmware#23543)

* 🐛 Fix Ultimain 2 E-autofan pin mapping (MarlinFirmware#23466)

* 🐛 Finish and organize temp sensors (MarlinFirmware#23519)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2022-01-17)

* 🚸 Suppressible pin warnings (MarlinFirmware#23530)

Co-authored-by: Scott Lahteine <[email protected]>

* 💄 Improve Ender3 v2 DWIN MarlinUI (MarlinFirmware#23369)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2022-01-18)

* ✨ Long filename open/create/write (MarlinFirmware#23526)

Co-authored-by: Scott Lahteine <[email protected]>

* 🔨 Suppressible CONFIGURATION_EMBEDDING warning (MarlinFirmware#23545)

* 💥 Generalize extra debugging

* 🐛 Fix Octopus v1.x probe pin (MarlinFirmware#23548)

* 🐛 Fix RAMPS 1.4 Plus EXP headers (MarlinFirmware#23523)

* 📌 RAMPS AUX 1-2 headers (MarlinFirmware#23544)

* [cron] Bump distribution date (2022-01-19)

* 🐛 Fix conditional M81 suicide (MarlinFirmware#23549)

* 🎨 Misc. style and cleanup

* 🎨 LCD_SCREEN_ROT_* => LCD_SCREEN_ROTATE

* 📝 Tweak G26 Q description

* 🩹 Fix Robin Nano BOARD_INIT

* 🧑‍💻 Add chmod to mfprep

* [cron] Bump distribution date (2022-01-20)

* 🩹 BOARD_INIT followup

* 🩹 Fix power.h compile (MarlinFirmware#23573)

* [cron] Bump distribution date (2022-01-21)

* ♻️ Adjust LCD init, contrast default, settings load

* 🐛 Fix LCD contrast/brightness init (MarlinFirmware#23567)

Co-authored-by: Scott Lahteine <[email protected]>

* 🧑‍💻 Fix up some AUX / EXP pins (MarlinFirmware#23577)

* [cron] Bump distribution date (2022-01-22)

* 🔨 Creality RCT6 (256K) variants (MarlinFirmware#23599)

Co-authored-by: Scott Lahteine <[email protected]>

* 🩹 Fix DWIN float debugging (MarlinFirmware#23601)

* 🐛 Fix Creality DWIN LCD with SKR Mini E3 V3 (MarlinFirmware#23593)

* 🐛 Fix DGUS_Reloaded G-code execution (MarlinFirmware#23592)

* ⚡️ Tuned Thermistor 66 (T-D500) (MarlinFirmware#23585)

* [cron] Bump distribution date (2022-01-25)

* 🧑‍💻 HAS_MARLINUI_MENU, HAS_MANUAL_MOVE_MENU

* ✏️ Fix MKS enum

* ✅ FYSETC TFT81050 CI Test (MarlinFirmware#23604)

* ✨ BOARD_CREALITY_V24S1_301 (MarlinFirmware#23620)

Co-Authored-By: Miguel Risco-Castillo <[email protected]>

* [cron] Bump distribution date (2022-01-26)

* 🚸 Better "Bed Tramming Done" dialog (MarlinFirmware#23616)

Co-authored-by: Scott Lahteine <[email protected]>

* 📝 Update Creality 4.2.2 driver warning

* 🐛 Fix SPI DMA and default mode (MarlinFirmware#23627)

Followup to MarlinFirmware#23464

* [cron] Bump distribution date (2022-01-27)

* 🧑‍💻 Simplify Fast PWM timer macros

* [cron] Bump distribution date (2022-01-28)

* 🐛 Fix EZBoard V2 timer conflict (MarlinFirmware#23648)

* 🐛 Fix AVR 644/1284 Timer / PWM conflicts (MarlinFirmware#23629)

* 🐛 Fix FYSETC S6, S6 V2 Serial RX pins (MarlinFirmware#23642)

* [cron] Bump distribution date (2022-01-30)

* 🐛 Fix EZBoard V2 Environment for OpenBLT (MarlinFirmware#23659)

* [cron] Bump distribution date (2022-02-01)

* 🐛 Fix M852 report (MarlinFirmware#23660)

* 🔧 Board temp sensor check

* 🚸 Case Light, LED menus for E3V2 DWIN Enhanced UI (MarlinFirmware#23590)

* [cron] Bump distribution date (2022-02-02)

* 🐛 Creality v4 cleanup, pin correction (MarlinFirmware#23666)

* 🔧 Sanity-check AVR D9 Fan PWM / SPEAKER Timer2 (MarlinFirmware#23672)

* [cron] Bump distribution date (2022-02-04)

* 💡 Comment variant timers

* 🍻 STM32 set_pwm_duty "on/off" for digital pins (MarlinFirmware#23665)

* 🐛 Fix RUMBA + MKS Mini12864 Neopixel pin (MarlinFirmware#23646)

* 🧑‍💻 Relocate a variant

* ✨ Add ZRIB v53, patch G35 Z drop, related issues (MarlinFirmware#23636)

* 📌 Distinct BOARD_CREALITY_V422 (MarlinFirmware#23674)

* [cron] Bump distribution date (2022-02-05)

* ✨ SAMD51 Bricolemon / Bricolemon Lite boards (MarlinFirmware#23658)

* 🐛 Fix Index Mobo Rev03 upload (MarlinFirmware#23676)

* 🩹 Init brightness/contrast later (MarlinFirmware#23645)

* 🚨 Deprecate Maple build (MarlinFirmware#23661)

* 🩹 Prevent Z error with UBL + Park unscaled E move (MarlinFirmware#23568)

* 🐛 Fix dual MAX31865 initialization issues (MarlinFirmware#23496)

* 🔨 Clean up upload.py (MarlinFirmware#23679)

* 🚸 Enhanced UI => Professional UI - with updates (MarlinFirmware#23624)

* 🐛 Fix missing u8g_esp32_spi (MarlinFirmware#23562)

* [cron] Bump distribution date (2022-02-06)

* 🐛 Fix init of delta safe height (for G29, G33, etc.) (MarlinFirmware#23622)

* [cron] Bump distribution date (2022-02-07)

* 🧑‍💻 Generic Maple STM32F103RC envs for devs (MarlinFirmware#23686)

* 🚨 Cleaner errors for renamed envs (MarlinFirmware#23690)

* 🩹 Fix Maple HAL compile errors (MarlinFirmware#23685)

* PLR accessors for Ext UI (MarlinFirmware#23687)

* [cron] Bump distribution date (2022-02-08)

* 🔧 Update MIXING_EXTRUDER sanity checks

Fixing MarlinFirmware#23693

* ✨ Optional HOST_STATUS_NOTIFICATIONS (MarlinFirmware#22833)

* 🧑‍💻 Drop hostui.flag

* [cron] Bump distribution date (2022-02-09)

* 🚸 Restore active tool after ABL G29 (MarlinFirmware#23692)

Co-authored-by: Scott Lahteine <[email protected]>

* 🚸 Fix, Improve Power-Loss Recovery (MarlinFirmware#22828)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2022-02-10)

* 🐛 Fix XYZEval::set(XY, Z) and (XY, Z, E) (MarlinFirmware#23704)

Fix regression in MarlinFirmware#21953

Co-authored-by: Scott Lahteine <[email protected]>

* 🩹 Simplify quick homing feedrate (MarlinFirmware#23714)

Co-authored-by: Scott Lahteine <[email protected]>

* 🧑‍💻 Wrap MMU1 pins

* ✨ Pxmalion Core i3 (MarlinFirmware#23711)

* 🎨 Misc. DGUS cleanup

* [cron] Bump distribution date (2022-02-11)

* 💥 Change 'M42 M' to 'M42 T'

* 🚸 Align MKS UI heated bed status with HAS_MULTI_HOTEND (MarlinFirmware#23718)

* ✏️ Fix E3V2 display with BTT SKR Mini E3 v3 (MarlinFirmware#23719)

* ✨ More Nozzle Park move options (MarlinFirmware#23158)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2022-02-12)

* 🔧 HAS_LCDPRINT conditional

* 📝 Update conditionals descriptions

* ♻️ No ui.reinit_lcd on any ExtUI (MarlinFirmware#23722)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2022-02-14)

* 🐛 Fix XATC divide-by-zero (MarlinFirmware#23743)

* ♻️ Rename XATC z_values => z_offset

* [cron] Bump distribution date (2022-02-16)

* 🧑‍💻 Update MightyBoard FET pins (MarlinFirmware#23728)

* [cron] Bump distribution date (2022-02-17)

* 🐛 Patch Creality RAMPS FET / FAN pins

Improvement for multi-hotend setup by TH3D.

* [cron] Bump distribution date (2022-02-18)

* 🐛 Fix HAS_TMC26X feature path (MarlinFirmware#23757)

* 🚨 Fix TEMP_SENSOR_BOARD warnings (MarlinFirmware#23754)

* ✏️ Fix getLFNName parameter (MarlinFirmware#23752)

* ♻️ Refactor HAL as singleton (MarlinFirmware#23357)

* [cron] Bump distribution date (2022-02-19)

* 📌 Creality RAMPS optional SD_DETECT_PIN (MarlinFirmware#23740)

Co-authored-by: Scott Lahteine <[email protected]>

* ⚡️ Apply PTC on all probing (MarlinFirmware#23764)

Co-authored-by: Scott Lahteine <[email protected]>

* 📝 Update Toolchange FS comments

* ✨ Dyze Design PT100 Amplifier Board (MarlinFirmware#23760)

* 🔧 Warning for MK3_FAN_PINS (MarlinFirmware#23727)

* 🔨 Workspace file with recommendation

* 🐛 Fix TMC26X CS pins init (MarlinFirmware#23778)

* 🐛 Ibid.

* [cron] Bump distribution date (2022-02-22)

* 🔨 More renamed.ini envs (MarlinFirmware#23786)

* [cron] Bump distribution date (2022-02-23)

* 🎨  Move PROPORTIONAL_FONT_RATIO

* [cron] Bump distribution date (2022-02-25)

* 🐛 Fix steps-to-mm with backlash (MarlinFirmware#23814)

Co-authored-by: Scott Lahteine <[email protected]>

* 🐛 ESP32 _delay_ms, fix u8g_esp32_spi.cpp (MarlinFirmware#23810)

* ✨ MKS Robin Nano 3.1 (MarlinFirmware#23795)

* 📺 BTT SKR Mini E3 with Fysetc V2.1 / MKS V3 / BTT V1 Mini 12864 (MarlinFirmware#23793)

* 🔧 SHOW_CUSTOM_BOOTSCREEN sanity-check (MarlinFirmware#23807)

* ✨ LCD Backlight Timer (MarlinFirmware#23768)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2022-02-27)

* ✨ M21 P / S / U - Select Volume (MarlinFirmware#23780)

Co-authored-by: Scott Lahteine <[email protected]>

* [cron] Bump distribution date (2022-02-28)

* 🌐 Update German language (MarlinFirmware#23832)

* 🔨 Fix 'renamed' env (platform = ststm32) (MarlinFirmware#23831)

* 🐛 Fix backlash applied steps when config changes (MarlinFirmware#23826)

Followup to MarlinFirmware#23814

* 🚨 Fix BLTouch 5V pin tolerance checks (MarlinFirmware#23823)

* ⚡️ E3V2 blank bg for S1 compatibility (MarlinFirmware#23822)

* ✨ Weedo 62A Tina2 / Monoprice Cadet (MarlinFirmware#23817)

* [cron] Bump distribution date (2022-03-02)

* 🐛 Fix M_State_grbl when G29 calls G28

* 🚸 Universal X_AXIS_TWIST_COMPENSATION (MarlinFirmware#23828)

* 🚸 Use Z_STEPPER_ALIGN_STEPPER_XY to enable

* ⚡️ Use seen_test in `M422`

* [cron] Bump distribution date (2022-03-03)

* 🚸 12345.6 num-to-string

* 🩹 Improve and apply XATC reset() (MarlinFirmware#23840)

* 🐛 Emergency Parser with STM32 Mass Storage (MarlinFirmware#23827)

* 🔧 Mark Thermal Variance Monitor EXPERIMENTAL

* ✏️ num-to-string followup

* [cron] Bump distribution date (2022-03-05)

* 🚸 TH3D EZBoard V2 TMC slave addresses (MarlinFirmware#23857)

* 🚸 Improve M422 error messages

* 🩹 Fix 'hdsl' warning

* [cron] Bump distribution date (2022-03-11)

* 🔧 DWIN_CREALITY_LCD_ENHANCED => DWIN_LCD_PROUI

Followup to MarlinFirmware#23624

* 📝 Update laser/spindle docs link (MarlinFirmware#23886)

* 🐛 Fix UI include

Followup to ~2

* fix g29 (MarlinFirmware#23887)

* 🚸 Update Ender3 V2/S1 Pro UI (MarlinFirmware#23878)

* 🐛 Restore STM32 / STM32F1 12-bit ADC (MarlinFirmware#23871)

* 🚸 Fix, extend X Axis Twist Compensation (MarlinFirmware#23745)

Co-authored-by: Scott Lahteine <[email protected]>

* 📌 Fix, extend Index Rev03 Mobo (MarlinFirmware#23851)

Co-authored-by: Scott Lahteine <[email protected]>

* 🚸 M401 H - Report BLTouch HS State (MarlinFirmware#23724)

* 🧑‍💻 STM32G0Bx : Use PLLQ for USB clock (MarlinFirmware#23870)

* [cron] Bump distribution date (2022-03-12)

* 🧑‍💻 Add ExtUI::onLevelingDone, match DWIN to ExtUI

* 🐛 Fix UBL 'G29 Q1' bug

* 🌐 Fix, add some menu labels (MarlinFirmware#23895)

* 🧑‍💻  Add standard BUZZ types

* 🩹 Fix FSTR / PSTR usage

* 🐛 Fix Chiron new TFT SD print after reset (MarlinFirmware#23855)

* 🔨 Drop extraneous build flag (MarlinFirmware#23862)

* [cron] Bump distribution date (2022-03-13)

* ⚡️ G12 - Only require used axes to be homed (MarlinFirmware#23422)

Co-authored-by: Scott Lahteine <[email protected]>

* 🚸 Test LIN_ADVANCE in a pins file

* 📝 Fix DEFAULT_DUAL_X_CARRIAGE_MODE comment

* 📝 Fix X2_MAX_POS comment (MarlinFirmware#23873)

* 🩹 Fix ExtUI build with Host Keepalive disabled (MarlinFirmware#23898)

* 🐛 Fix STM32F1 HAL build (MarlinFirmware#23897)

Followup to MarlinFirmware#23357

* 🧑‍💻 Allow DIGIPOT Rsx / Vrefmax override (MarlinFirmware#23885)

* 🩹 Fix DWIN E3V2 display issues by allowing re-init (MarlinFirmware#23879)

* [cron] Bump distribution date (2022-03-14)

* 🐛 MKS TinyBee - 2.5V ADC Vref (MarlinFirmware#23903)

* [cron] Bump distribution date (2022-03-18)

* 🩹 Fix redundant var declaration (MarlinFirmware#23913)

* ⚡️ Fix noisy ADC - 16x oversampling with 12-bit ADC (MarlinFirmware#23867)

* 🩹 Fix xatc EEPROM debug (MarlinFirmware#23911)

* ✨ ESP32 - Hardware PWM for fan, cutter, servos (MarlinFirmware#23802)

* 📌 PandaPi V2.9 – Standalone mode (MarlinFirmware#23908)

* [cron] Bump distribution date (2022-03-19)

* ✏️ Misc. cleanup

* ✨ Encoder button noise filter (MarlinFirmware#23925)

* [cron] Bump distribution date (2022-03-21)

Co-authored-by: Kyle Hu <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: Anson Liu <[email protected]>
Co-authored-by: Lefteris Garyfalakis <[email protected]>
Co-authored-by: jdegenstein <[email protected]>
Co-authored-by: ClockeNessMnstr <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: GHGiampy <[email protected]>
Co-authored-by: Miguel Risco-Castillo <[email protected]>
Co-authored-by: Tanguy Pruvot <[email protected]>
Co-authored-by: Roman Moravčík <[email protected]>
Co-authored-by: David Ross Smith <[email protected]>
Co-authored-by: DerAndere <[email protected]>
Co-authored-by: mistic100 <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: Jim Watson <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Mike La Spina <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Sola <[email protected]>
Co-authored-by: A. Herlas <[email protected]>
Co-authored-by: Taylor Talkington <[email protected]>
Co-authored-by: zerkix <[email protected]>
Co-authored-by: John Lagonikas <[email protected]>
Co-authored-by: Salvatore Bramante <[email protected]>
Co-authored-by: Fahad Alduraibi <[email protected]>
Co-authored-by: DejitaruJin <[email protected]>
Co-authored-by: Lars <[email protected]>
Co-authored-by: Timofey Titovets <[email protected]>
Co-authored-by: Timothy Hoogland <[email protected]>
Co-authored-by: Maeyanie <[email protected]>
Co-authored-by: Bob Kuhn <[email protected]>
Co-authored-by: Bones <[email protected]>
Co-authored-by: Bruno Henrique de Paula <[email protected]>
Co-authored-by: Kelroy <[email protected]>
Co-authored-by: Stephen Hawes <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: MOHAMMAD RASIM <[email protected]>
Co-authored-by: Mads Ynddal <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: Thomas White <[email protected]>
Co-authored-by: John Robertson <[email protected]>
Co-authored-by: Giuseppe499 <[email protected]>
Co-authored-by: Simon Pilepich <[email protected]>
Co-authored-by: jefflessard <[email protected]>
Co-authored-by: tombrazier <[email protected]>
Co-authored-by: sam <[email protected]>
Co-authored-by: M. FURIC Franck <[email protected]>
Co-authored-by: kisslorand <[email protected]>
Co-authored-by: Ludy <[email protected]>
Co-authored-by: Julien Staub <[email protected]>
Co-authored-by: Jack Wilsdon <[email protected]>
Co-authored-by: GatCode <[email protected]>
Co-authored-by: BIGTREETECH <[email protected]>
Co-authored-by: Nick <[email protected]>
Co-authored-by: Mathew Winters <[email protected]>
Co-authored-by: Mrnt <[email protected]>
Co-authored-by: Jelmer van der Stel <[email protected]>
Co-authored-by: Mark <[email protected]>
Co-authored-by: Fredrik Andersson <[email protected]>
thinkyhead pushed a commit that referenced this pull request May 7, 2022
@salva00 @thinkyhead
🐛 Fix Octopus v1.x probe pin (#23548)
4e72df9
mh-dm pushed a commit to mh-dm/Marlin that referenced this pull request May 15, 2022
@salva00 @mh-dm
🐛 Fix Octopus v1.x probe pin (MarlinFirmware#23548)
67513b7
PhilomathJ pushed a commit to PhilomathJ/Marlin-Firmware that referenced this pull request Jul 18, 2022
@salva00
🐛 Fix Octopus v1.x probe pin (MarlinFirmware#23548)
fe860eb
tomek2k1 pushed a commit to tomek2k1/Marlin that referenced this pull request Jan 13, 2023
@salva00 @tomek2k1
🐛 Fix Octopus v1.x probe pin (MarlinFirmware#23548)
eedc74d
RaphDaMan added a commit to RaphDaMan/Marlin that referenced this pull request Jun 1, 2023
@RaphDaMan
Squashed commit of the following:
9bdd603 
commit 800a936caae83f4e5ca5dd2c2660518bd6fc43b2
Author: Scott Lahteine <[email protected]>
Date:   Thu May 26 18:18:41 2022 -0500

    🎨 Combine serial echos

commit ccf39b1c42fa787f645fbf0ac075cc47b72b18d3
Author: ellensp <[email protected]>
Date:   Fri May 27 12:02:42 2022 +1200

    🔨 Add src_filter for I2C_AMMETER (#24242)

commit d19179ce281cec58865fcbc99185abeb48a611b9
Author: Keith Bennett <[email protected]>
Date:   Thu May 26 16:07:10 2022 -0700

    ✏️ Fix some motherboard checks (#24238)

commit 4a6ae1b64df5fa8824e20688399683bf11b840e2
Author: ellensp <[email protected]>
Date:   Wed May 25 08:31:29 2022 +1200

    🎨 Remove MKS custom pins, TinyBee cleanup (#24186)

commit 0daaef589c956d152c846760dfc157fdd1b7975b
Author: ellensp <[email protected]>
Date:   Wed May 25 07:49:57 2022 +1200

    📌 Use MarlinSimUI/bugfix-2.0.x (#24232)

commit 4831cbebd80d6e2c6bcf504446cf6d0f2441c285
Author: Scott Lahteine <[email protected]>
Date:   Mon May 23 02:37:28 2022 -0500

    🎨 Add EXP1/2 headers, adjust TFT pins (#24230)

commit e0deb75764938995e32bc589d646ec397c4a3019
Author: tombrazier <[email protected]>
Date:   Thu May 19 22:15:15 2022 +0100

    🐛 Fix Leveling apply/unapply (#24188)

    Co-authored-by: Scott Lahteine <[email protected]>

commit a0fe4f48956299cb298e6e48255ea72ba93dad79
Author: Scott Lahteine <[email protected]>
Date:   Sat May 14 15:31:51 2022 -0500

    🎨 Minor HAL cleanup

commit 4d65d7f142882bcd77072fc7dc5c01ca937a2e81
Author: Keith Bennett <[email protected]>
Date:   Sun May 22 19:32:28 2022 -0700

    📝 Add logo, helpful links to README (#24226)

commit 1b879f0ee4e5539c237edf235b6ca38b5b2beb43
Author: Scott Lahteine <[email protected]>
Date:   Sun May 22 18:42:25 2022 -0500

    🔨 Fix mfprep string test

commit b6abc760cef73a1dfc0e186f40687d0a45c8a769
Author: Scott Lahteine <[email protected]>
Date:   Sat May 14 01:45:14 2022 -0500

    🔨 Move, tweak maple envs

commit 0ae061713c631d44cd12ad266ca9c7fdd856d72c
Author: Keith Bennett <[email protected]>
Date:   Fri May 20 09:48:34 2022 -0700

    👔 Move GitHub templates, update README (#24199)

commit 1d12e72bf697f7e3cb63995a20ba9e98fbce3eb9
Author: Scott Lahteine <[email protected]>
Date:   Sun May 22 16:53:12 2022 -0500

    🐛 Fix SEGMENT_LEVELED_MOVES with UBL

commit c97cf10956ee33c80e557fb09e4cc75d30a0db82
Author: Scott Lahteine <[email protected]>
Date:   Sat May 21 19:29:59 2022 -0500

    🩹 Fix const warning

commit b72f9277e9e89a7dcdc12c8f11273f7c76a064d4
Author: Scott Lahteine <[email protected]>
Date:   Thu May 19 06:05:52 2022 -0500

    ♻️ Common Bed Leveling object name, accessors (#24214)

commit 06c4a9acdb3f08a2052ea55d00fa350e9249bcb4
Author: Keith Bennett <[email protected]>
Date:   Sat May 21 16:13:00 2022 -0700

    🐛 Fix FLSUN Hispeed FIL_RUNOUT_PIN, MKS Robin Mini TFT pins (#24204)

commit 8a301196e11d87d7e9db065d0d802910a664c5be
Author: Arthur Masson <[email protected]>
Date:   Sat May 21 21:45:30 2022 +0200

    🐛 Fix Polargraph G92 command (#24223)

commit 1e7219f4a643f8cbdbcd9685ebb5a76d02c89601
Author: Marcio T <[email protected]>
Date:   Thu May 19 09:45:48 2022 -0600

    🐛 Fix FTDI_EVE_TOUCH_UI reboot loop (#24195)

commit 02c267f542223ed0d8b098da4bec6f09710d6bc8
Author: ellensp <[email protected]>
Date:   Fri May 20 02:15:57 2022 +1200

    🔨 Require PIO >= 6.0.1 (#24205)

commit fe77fc66c0004ba9a4459dd5a12c978dd0308bb1
Author: Ivan Kravets <[email protected]>
Date:   Wed May 18 00:47:11 2022 +0300

    🔨 Use PlatformIO Core 6.0 Dev for CI (#24194)

commit 268a16b1ef1c5cd462e81aef08e4e9f7d2c65658
Author: Scott Lahteine <[email protected]>
Date:   Tue May 17 15:05:25 2022 -0500

    🚸 ProUI APRIL2022 updates (#24084)

commit 8351b1431f8bad178f2f8a3ec70b32a1d4d7ca2c
Author: ellensp <[email protected]>
Date:   Tue May 17 20:01:32 2022 +1200

    🩹 Fix MarlinUI allow-cold-extrude (#24176)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 718806761f1e9d903d61408e2039357bfe46fff8
Author: Oliver Jean Eifler <[email protected]>
Date:   Tue May 17 06:23:03 2022 +0200

    🩹 Suppress ZERO() warning (#24178)

commit 78c7fedcea34f0c630f8e9fd46bc5d3244de04c5
Author: Marcio T <[email protected]>
Date:   Mon May 16 20:45:47 2022 -0600

    🐛 Fix Due cli/sei (#24182)

    Followup to #23357

commit c4b8339b842958faae2567c339bcf9b44434a2ce
Author: Scott Lahteine <[email protected]>
Date:   Fri May 13 23:49:29 2022 -0500

    🎨 HAL_MinSerial.* => MinSerial.*

commit 94ed67e36ef84cb4ecd8f3f1470041d4d72f7088
Author: Keith Bennett <[email protected]>
Date:   Fri May 13 17:50:42 2022 -0700

    🩹 Run TMC test last in setup (#24160)

commit 03b819bdb235c6eb2cd0a02b832bb8f108cc5962
Author: Miguel Risco-Castillo <[email protected]>
Date:   Fri May 13 19:34:30 2022 -0500

    🚸 DWIN/DACAI for Creality 4.2.3 (#24132)

commit 2204f05dcaabf0e639f1e1722ffd293d4b415fe3
Author: Scott Lahteine <[email protected]>
Date:   Fri May 13 19:31:07 2022 -0500

    🧑‍💻 Clarify MSerialUSB, drop HardwareSerial workaround

commit a13cceaad16dd2caedbf3b05ae0854b1200cb51e
Author: Keith Bennett <[email protected]>
Date:   Fri May 13 17:27:13 2022 -0700

    🚸 Improve MKS SGEN_L V2, Robin Nano V3 pins (#24147)

commit 5c25ed60c80d7b06cb91e91f98b1aca6bc648d79
Author: Dominic <[email protected]>
Date:   Sat May 14 02:18:04 2022 +0200

    🐛 Fix AIR_ASSIST (#24162)

commit 1c516bdd5e71fc3da05fb52da692c9c5ccb0c0d7
Author: Keith Bennett <[email protected]>
Date:   Fri May 13 17:17:19 2022 -0700

    🔧 Allow board & probe dummy thermistors (#24165)

commit 425684e2ffecf85dccab1eb4242772bc97992eb8
Author: grauerfuchs <[email protected]>
Date:   Fri May 13 20:08:50 2022 -0400

    🐛 Fix Mightyboard LED pin, fan override (#24168)

commit 63aecad7eef034d8cb2b3e81f8a22db8a148b90b
Author: Roxy-3D <[email protected]>
Date:   Fri May 13 17:29:50 2022 -0500

    🔨 BTT Octopus ST-Link programming/debugging

commit dcd769b4a18bd40f9664262d081d553994d8eb78
Author: Scott Lahteine <[email protected]>
Date:   Wed May 4 15:14:31 2022 -0500

    🎨 Nextion cleanup

commit f9b7f00d1e1c1004e0c2a9c35e23c1c67dc47172
Author: Scott Lahteine <[email protected]>
Date:   Wed May 4 19:10:14 2022 -0500

    🚚 Move speed_lookuptable.h

commit a6ff63d5060c0ef68c2ae9f6ccf3bcada2ec6b6e
Author: Keith Bennett <[email protected]>
Date:   Thu May 12 22:41:38 2022 -0700

    🎨 Clean up warnings / extra check (#24163)

commit 7d37ae2b2b1ea6613dbc8be0ec5fa30dbd6a87de
Author: ellensp <[email protected]>
Date:   Fri May 13 16:07:27 2022 +1200

    🔧 AVR/DUE Serial Port pin conflict checks (#24148)

    Co-authored-by: Scott Lahteine <[email protected]>

commit a7d40ec654a3eca783a19e93e7bb6f394f2e6d29
Author: Scott Lahteine <[email protected]>
Date:   Thu May 12 20:09:25 2022 -0500

    ✨ Add BOARD_CREALITY_V24S1_301F4

    Co-Authored-By: Miguel Risco-Castillo <[email protected]>

commit 7ed339cfa0a2d8298e0293cf465daaf4ac74c0f9
Author: InsanityAutomation <[email protected]>
Date:   Thu May 12 06:38:05 2022 -0400

    ✨ Creality CR-10 SmartPro (#24151)

    Co-authored-by: Scott Lahteine <[email protected]>

commit cb4ad020af2f56dc060ecafdfd58b0639a8f0199
Author: Scott Lahteine <[email protected]>
Date:   Thu May 12 20:13:59 2022 -0500

    🧑‍💻 Misc. LCD cleanup

commit 0805f9bf3f631d914bb6ff4817d65a9ab237fe6c
Author: Scott Lahteine <[email protected]>
Date:   Thu May 12 20:23:32 2022 -0500

    🩹 Fix ProUI leveling start message

commit d235bc9e1c5eeb210275a4abcf89a757d0259cc0
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 3 16:14:02 2022 -0500

    🧑‍💻 General and Axis-based bitfield flags (#23989)

commit d5f472a6cf4456bf715ee3b3a85132f3fbe7e15f
Author: Scott Lahteine <[email protected]>
Date:   Thu May 12 00:07:22 2022 -0500

    🔨 Fix g++ locator for CI

commit d67fa98cf601a8ef2642641a8aefbcdab1d5bcc2
Author: Scott Lahteine <[email protected]>
Date:   Thu May 12 04:16:31 2022 -0500

    🩹 Fix accel dividend

commit d3fe0caa7f83b8e971e8503b5344e20811d6c812
Author: Scott Lahteine <[email protected]>
Date:   Mon May 9 18:50:14 2022 -0500

    🧑‍💻 Clarify acceleration factor

commit bd09f8acff3c40fe9294cfc6b6a9220ec5b766fc
Author: Scott Lahteine <[email protected]>
Date:   Mon May 9 17:35:32 2022 -0500

    📌 Define RAMPS_SMART EXP headers, AZSMZ_12864

    See #23501

commit a9aca5f5e8c5c1ce40e09ce5cf80a875ec009aa0
Author: Scott Lahteine <[email protected]>
Date:   Mon May 9 16:47:04 2022 -0500

    ✏️ Fix spurious UTF

commit 13d1eb7241b8621267520e57811f8069b2e466e9
Author: Scott Lahteine <[email protected]>
Date:   Sat May 7 23:51:38 2022 -0500

    🔨 OpenOCD Debug for VSCode

commit 238ab1dd061145a525edd27bb8203ae216380894
Author: Mike La Spina <[email protected]>
Date:   Mon May 9 17:18:47 2022 -0500

    🩹 Fix Fan Tail Speed Init (#24076)

    Co-authored-by: Scott Lahteine <[email protected]>

commit a7e4061d1221531340e9f82bc6f1560e5d6feab8
Author: Keith Bennett <[email protected]>
Date:   Sat May 7 19:58:57 2022 -0700

    🔧 Fix Neo RGB sanity check (#24146)

commit 31c87adba80d50a90ae3c85b08cd01c5545c78b4
Author: ellensp <[email protected]>
Date:   Sun May 8 14:57:13 2022 +1200

    📌 Use ESP3DLib master branch (#24140)

commit 727e7e7fd71fb0404e0f5bf7f36dc10419d155c4
Author: ellensp <[email protected]>
Date:   Sun May 8 14:56:09 2022 +1200

    ✏️Fix Markforged endstops/G38 (#24141)

commit 975b90c0b7e6b836f67f3603c80f818dc095ffa5
Author: Scott Lahteine <[email protected]>
Date:   Sat Apr 23 06:18:56 2022 -0500

    🎨 Tweak NEOPIXEL_LED format (#24110)

commit 8f0180802ad327a0be47be9405a9a2764b5937db
Author: Scott Lahteine <[email protected]>
Date:   Thu May 5 11:47:08 2022 -0500

    🔧 Move LASER_COOLANT_FLOW_METER to LASER_FEATURE

commit aa4c9917552df8a383816a0af516b86e1237ff48
Author: Giuliano Zaro <[email protected]>
Date:   Fri Apr 1 04:22:26 2022 +0200

    📝 Obsolete freeze comment (#23964)

    Followup to #23944

commit 9ab1a57d729cfa207adfe3ee6d24d40de3bb159c
Author: Scott Lahteine <[email protected]>
Date:   Sat Apr 23 05:00:46 2022 -0500

    ♻️ Consolidate DGUSScreenHandler class (#24067)

commit 044bf8ab7ef7045583c9da175b8ebddd2b750f84
Author: Robby Candra <[email protected]>
Date:   Sun Apr 10 07:44:31 2022 +0700

    ⚰️ Clean up dead option (#24006)

commit 4bdec5e99330a35387c09adc27be94c5082b4405
Author: Scott Lahteine <[email protected]>
Date:   Fri Apr 22 01:12:43 2022 -0500

    🚸 More ExtUI events for ABL / UBL

commit 7444933d5d4fc93c6278e091be5af7e4f61b1d9c
Author: Scott Lahteine <[email protected]>
Date:   Thu Apr 21 02:26:17 2022 -0500

    🩹 Fix ESP32 servos, SD_IGNORE_AT_STARTUP

    Fixes #24007
    Followup to aaf5bf02

commit f35404f853ba185814bd17a4742ef34688ceba98
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 17 21:18:39 2022 -0500

    🧑‍💻 Handle PLR in manage_media

commit 7fa2dceddafcfeea4b2599fa2b9fe3542abd4c1f
Author: Keith Bennett <[email protected]>
Date:   Tue Apr 19 17:16:26 2022 -0700

    🐛 Fix ProUI / JyersUI leveling preheat (#24060, #24064)

    Co-Authored-By: Scott Lahteine <[email protected]>

commit 4c84769a814ab6534a1edebc66529b568c9d6d7e
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 10 06:31:39 2022 -0500

    🩹 Fix ADVANCED_PAUSE_RESUME_PRIME check

    Fixes #23824

commit 8fb3074901f83034cc240834a2fc75aad0ed43ad
Author: Robby Candra <[email protected]>
Date:   Fri Apr 15 11:21:12 2022 +0700

    🩹 Fix DEBUG_CARDREADER (#24023)

commit 230db90b70f1cafdea6fe3a8c28499e92004be53
Author: ellensp <[email protected]>
Date:   Fri Apr 22 23:02:47 2022 +1200

    🩹 Fix DGUS_PREHEAT_UI enable with DGUS_LCD_CLASSIC (#24066)

commit 28d2bc353ebbddc0ce0b96a634108392eb1089b4
Author: Scott Lahteine <[email protected]>
Date:   Sat Jan 1 16:48:24 2022 -0600

    🎨 Use LEDColor default C-CTOR

commit 7b5e2cd78619ba4334c0fe94b3f8293ed8d6e1ee
Author: Scott Lahteine <[email protected]>
Date:   Wed Apr 20 00:52:05 2022 -0500

    🐛  Update M913, M914 report

    Followup to #11248, #11249, #23400

commit 4b456078ddc1099c081e1e7149aba612c8f41008
Author: Giuliano Zaro <[email protected]>
Date:   Mon Apr 11 02:23:53 2022 +0200

    🌐 Update Italian language (#24019)

commit 8d3c84a6d969bf9fa576a17b0054d5b98324622d
Author: Keith Bennett <[email protected]>
Date:   Sat Apr 9 17:21:42 2022 -0700

    ✏️ Fix FYSETC Mini Panel neopixel type (#24011, #24111)

commit cbc6f23a8af0c864e3607dc24764582149c0d1f3
Author: Giuliano Zaro <[email protected]>
Date:   Mon Apr 4 01:49:51 2022 +0200

    🔧 Sanity-check SWITCHING_TOOLHEAD_X_POS (#23985)

commit bed8abe5b6df751d7dafc6f0f8d8dff7338625ce
Author: Giuliano Zaro <[email protected]>
Date:   Sun Apr 3 01:27:05 2022 +0200

    🐛 Fix PID edit menu for Bed, Chamber (#23987)

commit 74565890f335f26fa7012d0164eb2964c0f2918d
Author: tombrazier <[email protected]>
Date:   Fri Apr 1 03:13:16 2022 +0100

    ♻️ Refactor and fix ABL Bilinear (#23868, #24009, #24107)

commit 4ec9af42b8e24cf6ce9f238c9342bc1c11120429
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 29 03:38:25 2022 -0500

    💥 Rename ExtUI settings methods

commit b0d621d8b96fffda485efa45e61a68126613a766
Author: John Robertson <[email protected]>
Date:   Mon Apr 4 00:47:55 2022 +0100

    🧑‍💻 Define isr_float_t to assert a non-FPU float (#23969)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 995221e68e15693697fc7f10dfc31273ea188157
Author: Stephen Hawes <[email protected]>
Date:   Thu May 5 03:37:47 2022 -0400

    ✨ Add M3426 A<addr> parameter (#24130)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 54e543872be13439523cecb6b670b7b4bf818164
Author: LPRtypeCN <[email protected]>
Date:   Sun Apr 10 19:19:12 2022 +0800

    🌐 Update Chinese language (#23865)

commit 7b39604d6f58b46de18a41eb4a7de5058d9c4b35
Author: ellensp <[email protected]>
Date:   Mon Apr 4 11:46:05 2022 +1200

    🌐 Update Russian language (#23978)

commit 01c9c2666123f0959b02b757d2acd6adc18f4284
Author: Keith Bennett <[email protected]>
Date:   Mon Apr 18 03:46:58 2022 -0700

    🧑‍💻 Preheat menu improvements (#24017)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 27b148442826780c8fc4f7ab8c21608de21f0587
Author: ellensp <[email protected]>
Date:   Tue Apr 19 15:03:42 2022 +1200

    🐛 Fix Manual Move cold extrude override (#24045)

    Followup to #19606

    Co-authored-by: Scott Lahteine <[email protected]>

commit 7f1c5ad7aa6dc437d3a76abf8a36cb971e1f424e
Author: InsanityAutomation <[email protected]>
Date:   Sat Apr 9 20:19:14 2022 -0400

    🩹 Fix and clean up E3V2 draw (#23979, #24013)

commit 4fd7d1b056bfab9f31c272ae6d8f256ed2ed202d
Author: ellensp <[email protected]>
Date:   Thu Apr 21 21:06:22 2022 +1200

    🐛 Fix STM32 Pins Debugging (#22896)

commit 7ffe4de021254d34762d2a7ecd239ded0eca949d
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 10 07:39:50 2022 -0500

    🩹 Use LCD_CONTRAST_INIT in pins files

commit eada17ed69ede29d83f7c3897d64e2872faaae18
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 10 01:49:59 2022 -0500

    🩹 Apply 100% leveling correction below the bed

    See #24002

commit cd5c5ea60eb20d643ab2447bc3550b3eb5874a39
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 10 03:44:45 2022 -0500

    🔨 Fix LPC176x debug build

    See #23635

commit e9ea82e78d0c95ef1cee599093b4c91a6f97d709
Author: stream2me <[email protected]>
Date:   Sun Apr 10 02:46:29 2022 +0200

    🐛 Prefer os.replace, fix TFT_LVGL_UI build (#24001)

commit 18b17fc97d8474b2fe5c5cd7afcfdce05ba7d5cc
Author: ellensp <[email protected]>
Date:   Sat Apr 23 22:02:13 2022 +1200

    🐛 Fix MKS_MINI_12864 build for ESP32 (#24071)

commit 89d5ed0c9e5570e4a025719a9ad183e505c8ed8a
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 29 04:22:04 2022 -0500

    🎨  Combine common LPC1768 I2C code

commit a56bf9045d3e68101c42ced30884fa34675279c5
Author: Scott Lahteine <[email protected]>
Date:   Fri Apr 15 02:05:02 2022 -0500

    🧑‍💻 Simplify BIGTREE_SKR_2_F429 env

commit c23d0351495a7fc1c396d157642db49db2754135
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 10 08:43:11 2022 -0500

    🧑‍💻 Strip #errors in Configurations deployment

commit 7ff4b706947e63d708cef90c936b936305947e58
Author: Scott Lahteine <[email protected]>
Date:   Thu Apr 21 07:07:04 2022 -0500

    🚸 Prevent accidental button press

commit 421c38ff2e0de3a8d5cd913232aa3448dbfbc487
Author: Scott Lahteine <[email protected]>
Date:   Thu Apr 21 08:57:41 2022 -0500

    🐛  Home Z to Max after Z_SAFE_HOMING

commit ec447dba04409c2b60d61b9bacab54c101bd9f3a
Author: Scott Lahteine <[email protected]>
Date:   Thu Apr 21 09:05:12 2022 -0500

    🚸  Home Y before X on belt printers

commit be6535e5f7a39529bd081ed38a1bf76fa645488f
Author: Christian Piper <[email protected]>
Date:   Thu Apr 21 03:15:07 2022 -0400

    🩹 Fix PRINTCOUNTER with EXTRUDERS 0 (#24063)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 99252cf0cd5a8a01228c715a505cb1eaf6b853e5
Author: Scott Lahteine <[email protected]>
Date:   Thu Apr 21 08:58:45 2022 -0500

    🐛  Prevent BABYSTEP freeze

    See #22830, #13300

commit f6f31434b8c0e21f98fef460e0c8492fd4c240d5
Author: Scott Lahteine <[email protected]>
Date:   Thu Apr 21 07:16:52 2022 -0500

    🧑‍💻 IS_ULTRA_LCD => HAS_WIRED_LCD

commit 2f3960904e1a7b830c686fa793b122de49f3d674
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 10 03:45:28 2022 -0500

    🎨  Misc. USB flash code cleanup

commit 2dc4c642e78bb4fa99ca41f3ae3c92335248ffd4
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 3 16:50:39 2022 -0500

    🎨  Misc. adjustments, spacing

commit 70ea0e7c3450680e1062088243d2cf139eadc02a
Author: Scott Lahteine <[email protected]>
Date:   Mon Apr 18 16:41:16 2022 -0500

    ✏️ Remove extra G29 line

    Followup to 85a62bbf

commit a81fd009f081eca3685e42cffac7f35e75428fea
Author: Scott Lahteine <[email protected]>
Date:   Thu Apr 21 07:08:26 2022 -0500

    🎨  misc. cleanup

commit e667d4e6e43b407cedce6bbf543ea1d815e8d520
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 3 16:53:39 2022 -0500

    🌐  Rename "LCD Timeout" string

commit 2d0af75d37c9ea8ab44c889ef4e489b3b533eb30
Author: Scott Lahteine <[email protected]>
Date:   Sun Apr 3 18:07:40 2022 -0500

    ✏️ No such pin

commit 5e68a86968d63f97f0febb8378b2a508e909ec90
Author: ellensp <[email protected]>
Date:   Sun Apr 10 12:37:24 2022 +1200

    🔨 Preflight check old abl files (#24010)

commit 8bd1547c3bb16cdce37412624161fab5b9d5ead6
Author: Moritz Wirger <[email protected]>
Date:   Fri Apr 15 04:43:21 2022 +0200

    ✨ enwi ESPNP board support (#24029)

commit a5e083603f1435a4a0e2e9fa7449c9133aa73225
Author: Scott Lahteine <[email protected]>
Date:   Sat Apr 23 06:11:03 2022 -0500

    📝 Fix 'M150 S' comment

commit c5f7547e8cf0d744fb1392b3651078d3985cecb1
Author: Giuliano Zaro <[email protected]>
Date:   Tue Apr 26 05:03:16 2022 +0200

    🩹 Fix "elapsed" text on DOGLCD (#24087)

commit 5c5b380fda9f541ee182e614966fc39a72ac6a18
Author: InsanityAutomation <[email protected]>
Date:   Tue Mar 29 05:41:33 2022 -0400

    🐛 Fix MarlinUI on Ender 3 S1 (#23949)

commit bb0e0cf7f35cf3b89aac4f395185d55f3aa62979
Author: aegelsky <[email protected]>
Date:   Fri Apr 1 05:21:10 2022 +0300

    🐛 Fix MKS Gen. L - EEB (#23965)

commit 5ee99dfc49eaa8e81f5beb66eb1c160ac2d217fb
Author: Jon <[email protected]>
Date:   Thu Mar 31 22:18:32 2022 -0400

    🩹 SKR2 Pins DIAG flag (#23968)

    Followup to #23050

commit a083b1280ec80a525766c0a9487865b76de64c81
Author: Keith Bennett <[email protected]>
Date:   Thu Mar 31 19:16:11 2022 -0700

    📌 SKR Mini V1.1 TMC UART Pins (#23970)

commit b7b5cee88baadfb10822b6bb13b6e7d3b0acaff8
Author: grauerfuchs <[email protected]>
Date:   Thu Mar 31 22:15:06 2022 -0400

    🐛 Fix MightyBoard Rev. E EX2, extra MOSFETs (#23976)

commit 7456fd68a41b12592f3ac3f47308f7037ca22b86
Author: Keith Bennett <[email protected]>
Date:   Sun Apr 3 14:13:29 2022 -0700

    ✏️ Fix NOZZLE_PARK_Y_ONLY sanity-check (#23990)

commit 20154718b5a41c1522a313ada06ef5c35ce2023d
Author: Scott Lahteine <[email protected]>
Date:   Wed May 4 17:03:25 2022 -0500

    🌐 Clean up languages

commit a6794c1862c663b387637597dba5f258a3e0e1e2
Author: Manianac <[email protected]>
Date:   Thu Mar 31 17:23:52 2022 -0700

    🐛 Use ADC_VREF for Filament Width ADC Vref (#23977)

commit bd5c6bf23c1478dcab31cc1c2edcd0fa546eb6ea
Author: John Lagonikas <[email protected]>
Date:   Tue Mar 29 11:13:45 2022 +0300

    ✏️ Fix parking extruder compile (#23961)

    Followup to d3e3e6a491

commit 68ee64283a7aab95c2f70eaf734e24b9d909dfa7
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 29 03:48:37 2022 -0500

    🎨  INI cleanup

commit dd29394bbe17ab6458817cce65b94f106252092f
Author: Scott Lahteine <[email protected]>
Date:   Sat May 7 14:58:39 2022 -0500

    🔨 Improved mfprep script

commit ceb99e89a081d2230479e9bb7b63c23d14bf0b98
Author: Scott Lahteine <[email protected]>
Date:   Thu May 5 18:55:43 2022 -0500

    🔨 Prevent build attribute define conflicts

commit 6112277f9b2d24a7c9effeb5966dadef279a261c
Author: Scott Lahteine <[email protected]>
Date:   Thu May 5 19:11:59 2022 -0500

    🔨 Use first g++ in path for 'native' targets

commit 81f403025c3ddb479ccf363fb091ac0fcf8e667b
Author: Keith Bennett <[email protected]>
Date:   Thu May 5 00:38:48 2022 -0700

    🐛 Some EEPROM size fixes (#24113)

    Co-authored-by: Scott Lahteine <[email protected]>

commit eeda8b451acb2a0ae96656876f6a7682d43aca1d
Author: Scott Lahteine <[email protected]>
Date:   Wed May 4 12:47:15 2022 -0500

    📝 Replace KB with K in pins

commit c7e8ba78576af230278a5662103acf421dc59bfd
Author: Keith Bennett <[email protected]>
Date:   Mon May 2 16:29:25 2022 -0700

    📝 Fix extraneous URL args (#24125)

commit 071e5c336a157ca39b75081b8cb4436a72af965e
Author: Ludy <[email protected]>
Date:   Mon Mar 28 03:20:54 2022 +0200

    🐛 Fix MMU2 buzz (#23950)

    Followup to #23943

commit be08d4c4f01e2c297365664bd3e0f7dc2b051fde
Author: David Forrest <[email protected]>
Date:   Sun Mar 27 21:19:02 2022 -0400

    🔨 Fix Makefile GCC warning (#23957)

commit e99104a0040f58477809c9e2b9506fe2bcd94331
Author: ellensp <[email protected]>
Date:   Sat Mar 26 16:44:22 2022 +1300

    ✨ Configurable FREEZE pin state (#23944, #23948)

    Co-Authored-By: Scott Lahteine <[email protected]>

commit edc4089121bcd96645b7be6bbd3dafa88c510ede
Author: Scott Lahteine <[email protected]>
Date:   Fri Mar 25 21:16:00 2022 -0500

    🐛 Fix pulldown sanity check

commit 3bce266ef7865a62b5e79c7c5c67a068bb5e4c20
Author: ellensp <[email protected]>
Date:   Sat Mar 26 14:03:43 2022 +1300

    🐛 Fix MMU2 buzz (#23943)

    Followup to 89a9c3a391

commit c89d0114acba957d63e894bc1a479ec10cb18a81
Author: Robby Candra <[email protected]>
Date:   Sat Mar 26 06:34:20 2022 +0700

    ✨ STATUS_MESSAGE_TIMEOUT_SEC (#23135)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 0e693854d0c86fa0998a5d497607d42d6798f6ab
Author: Scott Lahteine <[email protected]>
Date:   Fri Mar 25 17:35:00 2022 -0500

    🚸 Clear "heating/cooling" message on temp reached

commit 9324132a401cf0ab3781c9992d607bd4f88ba086
Author: Scott Lahteine <[email protected]>
Date:   Fri Mar 25 17:09:55 2022 -0500

    🎨 Format, use status macros

commit 5632ad65f59710ca64e4abca99afa64cb99d559e
Author: Scott Lahteine <[email protected]>
Date:   Fri Mar 25 17:09:26 2022 -0500

    🐛 Fix status_printf alert level

commit eccbfbcede60922b95971e90bf3a1d7983a5fe39
Author: Scott Lahteine <[email protected]>
Date:   Fri Mar 25 17:04:06 2022 -0500

    🩹 Print English to serial out

commit 5ef4fb378e345e20d1fa3bdbc5312598dc571276
Author: Scott Lahteine <[email protected]>
Date:   Thu Mar 24 20:29:50 2022 -0500

    ✏️ Encoder noise followup

    Followup to #23925

commit 21f0945d2cfada672756709bc420feb11768e687
Author: Oleg Belov <[email protected]>
Date:   Fri Mar 25 02:12:35 2022 +0300

    📌 Custom cable for Mini 12864 V1 + SKR Mini E3 V3.0 (#23936)

commit b2a318af9a0c8e91b1f66a5576226b50b1b49f1b
Author: Serhiy-K <[email protected]>
Date:   Fri Mar 25 01:07:58 2022 +0200

    🌐 Update Ukrainian language (#23935)

commit 1c89c0470f2778f8051ff8514831138e64a2d9ed
Author: ellensp <[email protected]>
Date:   Fri Mar 25 12:06:28 2022 +1300

    🩹 Wrap endstop_diag.cpp (#23931)

commit 2ee4a667e1999839e61fa4c7d4e31a88d6e301d6
Author: Scott Lahteine <[email protected]>
Date:   Wed Jan 12 09:47:22 2022 -0600

    💡 Misc. cleanup, comments

commit f8e177a43efa3e7a173e2799562d354ab95544ab
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 20:39:53 2022 -0500

    🧑‍💻 Improve STATUS_BED_X

commit 9ac1c73041cbf4015b48d9d7a70a59e840a1d442
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 20:34:00 2022 -0500

    🎨 General cleanup, comments

commit 4a8b99d505584d1fa5eb71d588da1bb60c3a2878
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 22:22:08 2022 -0500

    🧑‍💻 EXTRUDER_LOOP macro

commit b094a3fc0d647f7daff7c4d97db32f9d41e4c11d
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 20:31:36 2022 -0500

    🎨 Clean up tool change with tool sensor

commit 2d99a608fd993fd5cb75223b72deadfc969a13c1
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 20:11:58 2022 -0500

    🔨 Fix 'mftest -s'

commit fba8805c0cd87845c80d9cd7738b94332a35e27b
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 20:11:10 2022 -0500

    🩹 Fix ADC math overflow

commit 039a22649f4e0201d7580b63c1a414450353438a
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 19:56:07 2022 -0500

    🧑‍💻 PIO --silent in build_example

commit ced0ad8e094baecf6e3ee8eaa36c61baaa5743fc
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 19:17:12 2022 -0500

    🎨 Apply _TERN where possible

commit 10a0c9a9b3d4070326954c5c2354cfd8ba490f0c
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 19:20:19 2022 -0500

    🔨 Suppress MMU2 resume_position warning

commit abfb0411809568970221281a3614e30970f0dfc1
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 19:08:00 2022 -0500

    🧑‍💻 Add neo.set_background_color(rgbw)

commit 72f207f4895d5db34f697cb203876405b98d89c8
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 18:53:42 2022 -0500

    🔧 Sanity-checks for PULLDOWN, SINGLENOZZLE

commit 7186037f20a2a2c57624e31c1e99adc37759c5f6
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 18:31:54 2022 -0500

    🔧 No Switching Nozzle with MMU2

commit b0a400da72f6752619a82246fac55a07a4e67f3c
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 18:14:17 2022 -0500

    🩹 No PE_MAGNET_ON_STATE without PARKING_EXTRUDER

commit cc4c2c2f98a1742d6b462481f74dacf5b5b93961
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 18:11:01 2022 -0500

    🔨 Allow I2CPE_ENC_n_INVERT set to false

commit 5dae8a67344cfeda3de6d40fcd14498542004fe9
Author: Scott Lahteine <[email protected]>
Date:   Tue Mar 22 15:30:29 2022 -0500

    🚸 Allow one servo with cutter on RAMPS

commit 05dea4e30a1768913ec7d1f38c65b9423200a558
Author: Fredrik Andersson <[email protected]>
Date:   Mon Mar 21 02:14:45 2022 +0100

    ✨ Encoder button noise filter (#23925)

commit 7e88ee8c5cc87395e73c45bcd743f3ab0302773b
Author: Mark <[email protected]>
Date:   Fri Mar 18 12:49:47 2022 +0800

    📌 PandaPi V2.9 – Standalone mode (#23908)

commit cc8e485e1c55fb2fcdba7dc8f6b89041ed18e9ce
Author: John Robertson <[email protected]>
Date:   Fri Mar 18 03:21:53 2022 +0000

    ✨ ESP32 - Hardware PWM for fan, cutter, servos (#23802)

commit c7a2ecc31aa4def9e60668f5cfc648d87776be9b
Author: ellensp <[email protected]>
Date:   Fri Mar 18 16:17:41 2022 +1300

    🩹 Fix xatc EEPROM debug (#23911)

commit 260b40d1453a9310581c45d3e1327a3103b36a22
Author: tombrazier <[email protected]>
Date:   Fri Mar 18 03:15:26 2022 +0000

    ⚡️ Fix noisy ADC - 16x oversampling with 12-bit ADC (#23867)

commit c87eded8f6183c33bd9b9a74dd577fe6c77c32df
Author: Ludy <[email protected]>
Date:   Fri Mar 18 02:55:33 2022 +0100

    🩹 Fix redundant var declaration (#23913)

commit 2f2a999368f22f2c6b3105ab481987c2025bc50e
Author: John Robertson <[email protected]>
Date:   Thu Mar 17 19:35:33 2022 +0000

    🐛 MKS TinyBee - 2.5V ADC Vref (#23903)

commit 2558b323e85006c3c9f6a03bcaa82f61c95da0bb
Author: Jelmer van der Stel <[email protected]>
Date:   Sun Mar 13 23:20:30 2022 +0100

    🩹 Fix DWIN E3V2 display issues by allowing re-init (#23879)

commit 1db685593922214e49496d805dc9ea099e227f50
Author: Mrnt <[email protected]>
Date:   Sun Mar 13 15:17:35 2022 -0700

    🧑‍💻 Allow DIGIPOT Rsx / Vrefmax override (#23885)

commit 62f298aca39ff17bc7a51f49b9ff6b5b17a76c30
Author: Julien Staub <[email protected]>
Date:   Sun Mar 13 23:09:32 2022 +0100

    🩹 Fix ExtUI build with Host Keepalive disabled (#23898)

commit 8d20c5aadfff34a024665ea349c0b66834e4d305
Author: InsanityAutomation <[email protected]>
Date:   Sun Mar 13 18:00:35 2022 -0400

    📝 Fix X2_MAX_POS comment (#23873)

commit 61b470249c1cfa361f25060940cc8b7f8a8f64e9
Author: Scott Lahteine <[email protected]>
Date:   Sun Mar 13 16:59:43 2022 -0500

    📝 Fix DEFAULT_DUAL_X_CARRIAGE_MODE comment

commit 4ffa88f814f3ddcb7273b73c9bb68773bcf1fd51
Author: Scott Lahteine <[email protected]>
Date:   Sun Mar 13 16:46:08 2022 -0500

    🚸 Test LIN_ADVANCE in a pins file

commit 8257040fafe758ac1913e9bf633fa0c9930dd9cb
Author: Mathew Winters <[email protected]>
Date:   Sun Mar 13 14:13:41 2022 +1300

    ⚡️ G12 - Only require used axes to be homed (#23422)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 5d9ab7e71eed56f242d4fae32836f305bb1ff680
Author: Keith Bennett <[email protected]>
Date:   Sat Mar 12 16:23:29 2022 -0800

    🔨 Drop extraneous build flag (#23862)

commit 1a76d4d467ebb3d8ed1df39767efa99beb08e854
Author: Nick <[email protected]>
Date:   Sat Mar 12 23:47:47 2022 +0000

    🐛 Fix Chiron new TFT SD print after reset (#23855)

commit 4028c1cfc7bcaf78e49bb98b527353ec30a970de
Author: Scott Lahteine <[email protected]>
Date:   Sat Mar 12 17:12:21 2022 -0600

    🩹 Fix FSTR / PSTR usage

commit c49f26a7ae6499f4e19dc1f75bb4438cb0d549cf
Author: Scott Lahteine <[email protected]>
Date:   Sat Mar 12 16:34:58 2022 -0600

    🧑‍💻  Add standard BUZZ types

commit f82b13359520baf4da4e41aa85ed0fe3f8d31173
Author: Ludy <[email protected]>
Date:   Sun Mar 13 00:36:23 2022 +0100

    🌐 Fix, add some menu labels (#23895)

commit 2c3f2a14715665d7309e212bfd2a48240118e627
Author: Scott Lahteine <[email protected]>
Date:   Sat Mar 12 15:59:01 2022 -0600

    🐛 Fix UBL 'G29 Q1' bug

commit 4817efcf81d353032b2873dc958ec63bcb298d19
Author: Scott Lahteine <[email protected]>
Date:   Sat Mar 12 15:58:28 2022 -0600

    🧑‍💻 Add ExtUI::onLevelingDone, match DWIN to ExtUI

commit 16271377e2a00c2cd416ec21e5a21272e9f805ed
Author: BIGTREETECH <[email protected]>
Date:   Sat Mar 12 08:23:18 2022 +0800

    🧑‍💻 STM32G0Bx : Use PLLQ for USB clock (#23870)

commit 61fb3828688c377178031142ba9cfaa3512cb915
Author: kisslorand <[email protected]>
Date:   Sat Mar 12 02:21:08 2022 +0200

    🚸 M401 H - Report BLTouch HS State (#23724)

commit 7dae720de5c4fdea5fab657c09a2c8ba66f5a054
Author: GatCode <[email protected]>
Date:   Sat Mar 12 00:56:31 2022 +0100

    📌 Fix, extend Index Rev03 Mobo (#23851)

    Co-authored-by: Scott Lahteine <[email protected]>

commit c6f4b38877d6ff5973c5273bf28c0fa1b60226a3
Author: Giuseppe499 <[email protected]>
Date:   Sat Mar 12 00:12:03 2022 +0100

    🚸 Fix, extend X Axis Twist Compensation (#23745)

    Co-authored-by: Scott Lahteine <[email protected]>

commit eabeac29fd311dc09799ce8a0db742048b07a2a9
Author: Miguel Risco-Castillo <[email protected]>
Date:   Fri Mar 11 15:06:49 2022 -0500

    🚸 Update Ender3 V2/S1 Pro UI (#23878)

commit b045c91f266d222f5851d76fb9723552c1f00313
Author: ellensp <[email protected]>
Date:   Sat Mar 12 03:51:25 2022 +1300

    fix g29 (#23887)

commit 56955c179d1fb6991f6267a344e712b1caeae154
Author: Scott Lahteine <[email protected]>
Date:   Fri Mar 11 02:56:24 2022 -0600

    🐛 Fix UI include

    Followup to ~2

commit 4eb1326355aaa022e1a9d41625851876b20b5aa3
Author: ellensp <[email protected]>
Date:   Fri Mar 11 21:52:35 2022 +1300

    📝 Update laser/spindle docs link (#23886)

commit b669aa49cccf4ceb41b99dfdbb88dac5945bed01
Author: Scott Lahteine <[email protected]>
Date:   Thu Mar 10 22:07:47 2022 -0600

    🔧 DWIN_CREALITY_LCD_ENHANCED => DWIN_LCD_PROUI

    Followup to #23624

commit 152ec49b8b43e40a9cceaaa90f3ebf1c194dfe11
Author: Scott Lahteine <[email protected]>
Date:   Thu Mar 10 17:35:03 2022 -0600

    🩹 Fix 'hdsl' warning

commit e4ca822dcf62c5a38b30472bd51ab40212ee2eb5
Author: Scott Lahteine <[email protected]>
Date:   Thu Mar 10 17:25:09 2022 -0600

    🚸 Improve M422 error messages

commit 0fafcd20cddc0e76003454d7c292430f367f1106
Author: Scott Lahteine <[email protected]>
Date:   Fri Mar 4 16:07:38 2022 -0600

    🔧 Mark Thermal Variance Monitor EXPERIMENTAL

commit bd72df3bb6387af9421b1503ab74e29b8a1e705c
Author: Jack Wilsdon <[email protected]>
Date:   Fri Mar 4 21:59:38 2022 +0000

    🐛 Emergency Parser with STM32 Mass Storage (#23827)

commit fd582dc863785b53048834d0c9789f1d264603b2
Author: tombrazier <[email protected]>
Date:   Fri Mar 4 21:57:51 2022 +0000

    🩹 Improve and apply XATC reset() (#23840)

commit 2986bc3b768e047fb333d35633900d512dbff439
Author: Scott Lahteine <[email protected]>
Date:   Wed Mar 2 17:58:23 2022 -0600

    ⚡️ Use seen_test in `M422`

commit e082a141f63e7af1d301a994c0ee796946bcb3a8
Author: Scott Lahteine <[email protected]>
Date:   Wed Mar 2 17:50:55 2022 -0600

    🚸 Use Z_STEPPER_ALIGN_STEPPER_XY to enable

commit 575c3150f96a7d43d93d092c9f0dd7f395ef6a78
Author: tombrazier <[email protected]>
Date:   Wed Mar 2 22:13:46 2022 +0000

    🚸 Universal X_AXIS_TWIST_COMPENSATION (#23828)

commit 43d4e306680d0a006f431b4ab29246450c6ee5e2
Author: Scott Lahteine <[email protected]>
Date:   Wed Mar 2 16:04:17 2022 -0600

    🐛 Fix M_State_grbl when G29 calls G28

commit 9b17699b9b371a88d7e5d79b60721e652c56c173
Author: Julien Staub <[email protected]>
Date:   Tue Mar 1 23:42:20 2022 +0100

    ✨ Weedo 62A Tina2 / Monoprice Cadet (#23817)

commit 0337602bbe289b72167a8ee49e996f799b281edc
Author: InsanityAutomation <[email protected]>
Date:   Tue Mar 1 17:25:30 2022 -0500

    ⚡️ E3V2 blank bg for S1 compatibility (#23822)

commit fbfe0642b6411d12340d6d53338af0cd386b4ab8
Author: ellensp <[email protected]>
Date:   Wed Mar 2 11:22:36 2022 +1300

    🚨 Fix BLTouch 5V pin tolerance checks (#23823)

commit 41a51e952792653059019e9e6064f6cd7a0beadb
Author: tombrazier <[email protected]>
Date:   Tue Mar 1 22:14:52 2022 +0000

    🐛 Fix backlash applied steps when config changes (#23826)

    Followup to #23814

commit 2d648e4dd94fd93ed0df9390dafe3e23335b5c29
Author: ellensp <[email protected]>
Date:   Wed Mar 2 11:11:26 2022 +1300

    🔨 Fix 'renamed' env (platform = ststm32) (#23831)

commit 35d11070b493a03e0011f96ec5af0ba72662dbe7
Author: Ludy <[email protected]>
Date:   Tue Mar 1 23:09:11 2022 +0100

    🌐 Update German language (#23832)

commit feafb7d49af67dd11172baf883d307eaea1e1b26
Author: kisslorand <[email protected]>
Date:   Mon Feb 28 04:38:11 2022 +0200

    ✨ M21 P / S / U - Select Volume (#23780)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 39001bd8d22f8a6f3b36b4b923b3ace359416c0a
Author: M. FURIC Franck <[email protected]>
Date:   Sat Feb 26 23:54:04 2022 +0100

    ✨ LCD Backlight Timer (#23768)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 3db2fecaa443634f80203b0762d503b7c706951e
Author: ellensp <[email protected]>
Date:   Sun Feb 27 11:50:17 2022 +1300

    🔧 SHOW_CUSTOM_BOOTSCREEN sanity-check (#23807)

commit c0288590b3319dd0a7afffbd52587b6071596cbb
Author: sam <[email protected]>
Date:   Sun Feb 27 00:48:59 2022 +0200

    📺 BTT SKR Mini E3 with Fysetc V2.1 / MKS V3 / BTT V1 Mini 12864 (#23793)

commit d2cd3f2e6830f10846871e6ce83342593c6cd67e
Author: ellensp <[email protected]>
Date:   Sun Feb 27 11:45:33 2022 +1300

    ✨ MKS Robin Nano 3.1 (#23795)

commit 893c6624384d68f7c6da7a383380fa13ccfc1ad0
Author: ellensp <[email protected]>
Date:   Sun Feb 27 09:34:44 2022 +1300

    🐛 ESP32 _delay_ms, fix u8g_esp32_spi.cpp (#23810)

commit b0fdbede9c98e8b807dd4a7a291b1b668c1a8e15
Author: tombrazier <[email protected]>
Date:   Sat Feb 26 20:30:33 2022 +0000

    🐛 Fix steps-to-mm with backlash (#23814)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 8e11a2bb8393c84a43a8c19a2f8ab499123cccb4
Author: Scott Lahteine <[email protected]>
Date:   Thu Feb 24 18:47:57 2022 -0600

    🎨  Move PROPORTIONAL_FONT_RATIO

commit 9588f21d2e8b91ab9061efdbb2d43df9c81e239e
Author: ellensp <[email protected]>
Date:   Thu Feb 24 05:36:39 2022 +1300

    🔨 More renamed.ini envs (#23786)

commit 80e569015bcd97cb9da43e4cecf20f0d0a8bd5f6
Author: ellensp <[email protected]>
Date:   Tue Feb 22 16:16:57 2022 +1300

    🐛 Fix TMC26X CS pins init (#23778)

commit be703522036250c4753d5ae1100c78bf01e8a124
Author: Keith Bennett <[email protected]>
Date:   Mon Feb 21 18:47:53 2022 -0800

    🔧 Warning for MK3_FAN_PINS (#23727)

commit 980c009fc7ff8ec07d37a1d936cf5711cb50cbdd
Author: Scott Lahteine <[email protected]>
Date:   Mon Feb 21 19:55:19 2022 -0600

    ✨ Dyze Design PT100 Amplifier Board (#23760)

commit 8a02646f5244a67cfdae32ba6a8b4dd68467f149
Author: Scott Lahteine <[email protected]>
Date:   Mon Feb 21 19:54:03 2022 -0600

    📝 Update Toolchange FS comments

commit 7ec2167a73d630e1408911bc172ede11189da27f
Author: tombrazier <[email protected]>
Date:   Tue Feb 22 01:15:52 2022 +0000

    ⚡️ Apply PTC on all probing (#23764)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 56cec9690a3717ce9ed2803b7c8f6486d532eae9
Author: Scott Lahteine <[email protected]>
Date:   Thu Feb 17 18:50:31 2022 -0600

    ♻️ Refactor HAL as singleton (#23357, #23871, #23897)

commit 428b67db316ceb11e41152270a97844c897feb39
Author: John Robertson <[email protected]>
Date:   Fri Feb 11 21:04:47 2022 +0000

    ✨ More Nozzle Park move options (#23158)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 1b2715ccf2722182ef787fa4639619b282647b1b
Author: Scott Lahteine <[email protected]>
Date:   Sat Feb 5 10:30:17 2022 -0600

    🚸 Enhanced UI => Professional UI - with updates (#23624)

commit ac76ed7eceee1063c53ce88c4d3471552c0aa279
Author: GHGiampy <[email protected]>
Date:   Wed Feb 2 00:35:38 2022 +0100

    🚸 Case Light, LED menus for E3V2 DWIN Enhanced UI (#23590)

commit 4ba4ab1c75bbf87c33b94bbb18b6cae4897fc226
Author: ellensp <[email protected]>
Date:   Tue Feb 22 13:31:44 2022 +1300

    📌 Creality RAMPS optional SD_DETECT_PIN (#23740)

    Co-authored-by: Scott Lahteine <[email protected]>

commit c0f6d2f78ca50852587d58cb3931d117baf0f5cc
Author: GHGiampy <[email protected]>
Date:   Fri Feb 18 01:45:42 2022 +0100

    ✏️ Fix getLFNName parameter (#23752)

commit 0b4f5298f5022666fedcb873b2d6e9a573ae42ef
Author: jefflessard <[email protected]>
Date:   Thu Feb 17 19:44:41 2022 -0500

    🚨 Fix TEMP_SENSOR_BOARD warnings (#23754)

commit 195383bc33e708e533ee7d7199184351d8f6e55b
Author: Simon Pilepich <[email protected]>
Date:   Wed Feb 16 13:46:09 2022 +1100

    🧑‍💻 Update MightyBoard FET pins (#23728)

commit 4199191e999667e66cbaa4ff7844c520774304ed
Author: Scott Lahteine <[email protected]>
Date:   Tue Feb 15 15:09:09 2022 -0600

    ♻️ Rename XATC z_values => z_offset

commit 7da28768f7bd60c936b66edc85c5d830dd86811a
Author: InsanityAutomation <[email protected]>
Date:   Sun Feb 13 14:44:24 2022 -0500

    ♻️ No ui.reinit_lcd on any ExtUI (#23722)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 172cd2eefb803a2a171c66b2b2bb453944bd5e61
Author: Scott Lahteine <[email protected]>
Date:   Sun Feb 13 13:12:38 2022 -0600

    📝 Update conditionals descriptions

commit 341113bcfb5e20d6587ebe44a746780b3b293867
Author: Scott Lahteine <[email protected]>
Date:   Sun Feb 13 12:55:00 2022 -0600

    🔧 HAS_LCDPRINT conditional

commit 5f0e1a15dfe63f250513e052b0de186a1ad805a1
Author: ellensp <[email protected]>
Date:   Sat Feb 12 08:50:07 2022 +1300

    ✏️ Fix E3V2 display with BTT SKR Mini E3 v3 (#23719)

commit 3abf4de4ae696f3c234b0be6d7cce5efa60d111e
Author: ellensp <[email protected]>
Date:   Sat Feb 12 08:39:34 2022 +1300

    🚸 Align MKS UI heated bed status with HAS_MULTI_HOTEND (#23718)

commit cc1a48ad2d86c8e53684a066c17e033cb20615ad
Author: Scott Lahteine <[email protected]>
Date:   Fri Feb 11 09:36:52 2022 -0600

    💥 Change 'M42 M' to 'M42 T'

commit 2a584cea96c885df2f6b2c7700d71dfcafe08551
Author: Scott Lahteine <[email protected]>
Date:   Thu Feb 10 16:03:48 2022 -0600

    🎨 Misc. DGUS cleanup

commit 9f57f6f36f464b412314144d2c72ff0dc8b4be9b
Author: Thomas White <[email protected]>
Date:   Fri Feb 11 04:02:45 2022 +0800

    ✨ Pxmalion Core i3 (#23711)

commit 59548410b8e76c5a2f18565c9f37338e4f2a4be6
Author: Scott Lahteine <[email protected]>
Date:   Thu Feb 10 13:58:50 2022 -0600

    🧑‍💻 Wrap MMU1 pins

commit 65c4f14a9e943451ae7379de9c40decd143caae9
Author: espr14 <[email protected]>
Date:   Thu Feb 10 20:28:38 2022 +0100

    🩹 Simplify quick homing feedrate (#23714)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 3e18cf2b6ac354ec679f028d3b3616e4cc51e72c
Author: MOHAMMAD RASIM <[email protected]>
Date:   Wed Feb 9 21:29:34 2022 +0300

    🚸 Fix, Improve Power-Loss Recovery (#22828)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 11071c747272d3546ee02e16c1a2a2ffe4893f61
Author: ellensp <[email protected]>
Date:   Thu Feb 10 05:46:53 2022 +1300

    🚸 Restore active tool after ABL G29 (#23692)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 38484c6eb6b0f1c8a49f46efaef707165dc539f6
Author: Scott Lahteine <[email protected]>
Date:   Tue Feb 8 18:02:28 2022 -0600

    🧑‍💻 Drop hostui.flag

commit b964d2fff00a138d59d46cf3213956067df930b3
Author: Taylor Talkington <[email protected]>
Date:   Tue Feb 8 18:36:06 2022 -0500

    ✨ Optional HOST_STATUS_NOTIFICATIONS (#22833)

commit 973366e6aafd2eca76105c4948c310e750e65cc2
Author: Scott Lahteine <[email protected]>
Date:   Tue Feb 8 17:03:38 2022 -0600

    🔧 Update MIXING_EXTRUDER sanity checks

    Fixing #23693

commit e255e4a69fa07c194b44e242cd3d20e2dacffa9b
Author: InsanityAutomation <[email protected]>
Date:   Mon Feb 7 17:24:18 2022 -0500

    PLR accessors for Ext UI (#23687)

commit 942f08852241a4584e82581967d6d01b375a5474
Author: InsanityAutomation <[email protected]>
Date:   Mon Feb 7 17:22:18 2022 -0500

    🩹 Fix Maple HAL compile errors (#23685)

commit c4341a4e351978a228272e583dd72f999eca643c
Author: ellensp <[email protected]>
Date:   Tue Feb 8 09:49:26 2022 +1300

    🚨 Cleaner errors for renamed envs (#23690)

commit 6e23ffd12c459908a5c9f8f02c02cd4841cf691f
Author: InsanityAutomation <[email protected]>
Date:   Mon Feb 7 15:40:14 2022 -0500

    🧑‍💻 Generic Maple STM32F103RC envs for devs (#23686)

commit 58239c65cbe0563d8f3a223b3ca2091dbbd1ee14
Author: Bob Kuhn <[email protected]>
Date:   Sun Feb 6 08:35:18 2022 -0600

    🐛 Fix init of delta safe height (for G29, G33, etc.) (#23622)

commit 82ae3646cb709537574869e469c242b406087827
Author: ellensp <[email protected]>
Date:   Sun Feb 6 05:52:18 2022 +1300

    🐛 Fix missing u8g_esp32_spi (#23562)

commit 8799837d75744c697f7dee994b327632c27cbfe4
Author: GHGiampy <[email protected]>
Date:   Sat Feb 5 17:23:44 2022 +0100

    🔨 Clean up upload.py (#23679)

commit cdcf31453b605fb133f10ddd1d1f952fc5a594c4
Author: John Lagonikas <[email protected]>
Date:   Sat Feb 5 03:10:59 2022 +0200

    🐛 Fix dual MAX31865 initialization issues (#23496)

commit a23ecf0d2f96d9c7547b8c545fb39e9396d271dd
Author: Bob Kuhn <[email protected]>
Date:   Fri Feb 4 19:00:35 2022 -0600

    🩹 Prevent Z error with UBL + Park unscaled E move (#23568)

commit f5046a41cd306cf107f8b7bc61bedb81f22ace78
Author: ellensp <[email protected]>
Date:   Sat Feb 5 13:51:00 2022 +1300

    🚨 Deprecate Maple build (#23661)

    Update Warnings.cpp

commit 0d07c49c1d91483c59294fce2e58577a4bf23bb9
Author: GHGiampy <[email protected]>
Date:   Sat Feb 5 01:44:21 2022 +0100

    🩹 Init brightness/contrast later (#23645)

commit f193729f546600eae327c688e1da46b1cc105586
Author: Stephen Hawes <[email protected]>
Date:   Fri Feb 4 19:42:15 2022 -0500

    🐛 Fix Index Mobo Rev03 upload (#23676)

commit 22db62d95a81ce67ea6157a3eb1957045de2b63a
Author: Kelroy <[email protected]>
Date:   Sat Feb 5 01:40:35 2022 +0100

    ✨ SAMD51 Bricolemon / Bricolemon Lite boards (#23658)

commit 50ffacfb90a672b6915ea407fce921c72be72a02
Author: Bruno Henrique de Paula <[email protected]>
Date:   Fri Feb 4 18:57:43 2022 -0300

    📌 Distinct BOARD_CREALITY_V422 (#23674)

commit 21935b41f076eb04bd851f35b31657e79db6584c
Author: Bones <[email protected]>
Date:   Fri Feb 4 14:52:57 2022 -0700

    ✨ Add ZRIB v53, patch G35 Z drop, related issues (#23636)

commit 15eabba11d3f0cc3c772e865719802d779a1f21e
Author: Scott Lahteine <[email protected]>
Date:   Fri Feb 4 15:49:39 2022 -0600

    🧑‍💻 Relocate a variant

commit b2d0f2fd8c1b5eea4be90163b71895651b93d851
Author: Bob Kuhn <[email protected]>
Date:   Fri Feb 4 13:34:48 2022 -0600

    🐛 Fix RUMBA + MKS Mini12864 Neopixel pin (#23646)

commit a07d7e4b8ab0cdc19ea6f88cc1fc8be4e8294fd7
Author: Mike La Spina <[email protected]>
Date:   Fri Feb 4 13:33:52 2022 -0600

    🍻 STM32 set_pwm_duty "on/off" for digital pins (#23665)

commit d4801461f504f1a2a68393b57d492b9bb9ac1ff5
Author: Scott Lahteine <[email protected]>
Date:   Fri Feb 4 12:39:30 2022 -0600

    💡 Comment variant timers

commit f42c1b4cae9549cdc260543aa17f220ee2dbaa53
Author: Mike La Spina <[email protected]>
Date:   Fri Feb 4 10:45:34 2022 -0600

    🔧 Sanity-check AVR D9 Fan PWM / SPEAKER Timer2 (#23672)

commit f8571fc18fc7a846e321581979a093d135c71999
Author: ellensp <[email protected]>
Date:   Sat Feb 5 05:24:38 2022 +1300

    🐛 Creality v4 cleanup, pin correction (#23666)

commit fbbf556e0886d8b2d69bf5b64540b123d37f4894
Author: Scott Lahteine <[email protected]>
Date:   Mon Feb 21 20:50:09 2022 -0600

    🔨 Workspace file with recommendation

commit 1cdaddaaf20fa359f4513e13baf08e4df0271fd9
Author: Scott Lahteine <[email protected]>
Date:   Tue Feb 1 17:28:29 2022 -0600

    🔧 Board temp sensor check

commit 4d8976bf6bbf8cd3f8ab25f48cfa163265da4469
Author: ellensp <[email protected]>
Date:   Mon Jan 31 00:34:03 2022 +1300

    🐛 Fix FYSETC S6, S6 V2 Serial RX pins (#23642)

commit c02bc3887aa23dfeb933a47c38bcf8ddfd6fe40c
Author: Mike La Spina <[email protected]>
Date:   Sun Jan 30 05:31:56 2022 -0600

    🐛 Fix AVR 644/1284 Timer / PWM conflicts (#23629)

commit 68dfc5056492f70c24b780564622d178346e240d
Author: Scott Lahteine <[email protected]>
Date:   Thu Jan 27 07:05:26 2022 -0600

    🧑‍💻 Simplify Fast PWM timer macros

commit c7b0626b02fba7ac37a918e6cc2b2f86556fd1e1
Author: Mike La Spina <[email protected]>
Date:   Wed Jan 26 14:01:22 2022 -0600

    🐛 Fix SPI DMA and default mode (#23627)

    Followup to #23464

commit 30d1f0ba81ffdb477fab7370584238e69f88cc8f
Author: Scott Lahteine <[email protected]>
Date:   Wed Jan 26 13:40:29 2022 -0600

    📝 Update Creality 4.2.2 driver warning

commit 758dc7af9d340dd5ece4c98374e60a213567a4ec
Author: Keith Bennett <[email protected]>
Date:   Wed Jan 26 10:33:10 2022 -0800

    🚸 Better "Bed Tramming Done" dialog (#23616)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 361dab93b387d3b1b5b62da016da0614d457db3d
Author: Scott Lahteine <[email protected]>
Date:   Tue Jan 25 18:33:30 2022 -0600

    ✨ BOARD_CREALITY_V24S1_301 (#23620)

    Co-Authored-By: Miguel Risco-Castillo <[email protected]>

commit f0f1d33980acef6ab2e202d7c4922453e6ad46dc
Author: ellensp <[email protected]>
Date:   Wed Jan 26 13:08:15 2022 +1300

    ✅ FYSETC TFT81050 CI Test (#23604)

commit 38e0e92e9d798fa8bb373e7b876b5f08b07fac0f
Author: Scott Lahteine <[email protected]>
Date:   Tue Jan 25 17:19:20 2022 -0600

    ✏️ Fix MKS enum

commit 2dcc3ddeedcbebf1bbd1b1cfc4bd8be17f14d020
Author: Scott Lahteine <[email protected]>
Date:   Tue Jan 25 15:33:03 2022 -0600

    🧑‍💻 HAS_MARLINUI_MENU, HAS_MANUAL_MOVE_MENU

commit 33c89547f041843c3bb8e247654ed861825b5f4a
Author: Timofey Titovets <[email protected]>
Date:   Tue Jan 25 12:36:09 2022 +0300

    ⚡️ Tuned Thermistor 66 (T-D500) (#23585)

commit a4ea8bc1e121301fe4dfaf304ae482709fae1754
Author: Lars <[email protected]>
Date:   Tue Jan 25 10:30:45 2022 +0100

    🐛 Fix DGUS_Reloaded G-code execution (#23592)

commit 9f06079549ffad265579e6933bb81491fc179892
Author: Keith Bennett <[email protected]>
Date:   Tue Jan 25 01:25:19 2022 -0800

    🐛 Fix Creality DWIN LCD with SKR Mini E3 V3 (#23593)

commit 2f48c30445281266adf19bc00232db66f885f516
Author: DejitaruJin <[email protected]>
Date:   Tue Jan 25 03:52:23 2022 -0500

    🩹 Fix DWIN float debugging (#23601)

commit 50906876824881a807917310e05f77b9d6f9b04b
Author: Keith Bennett <[email protected]>
Date:   Tue Jan 25 00:09:53 2022 -0800

    🔨 Creality RCT6 (256K) variants (#23599)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 2d032b734c7a2e92af597e44dcf111b551d4f6a6
Author: Scott Lahteine <[email protected]>
Date:   Sat Jan 22 10:19:26 2022 -0600

    🧑‍💻 Fix up some AUX / EXP pins (#23577)

commit 2142456a255d66aa8bda782d9950c024039e21f5
Author: Mike La Spina <[email protected]>
Date:   Sat Jan 22 10:16:41 2022 -0600

    🐛 Fix LCD contrast/brightness init (#23567)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 99f3b8b4a8238bf11ae6ee70c58e3e053abfcffc
Author: Scott Lahteine <[email protected]>
Date:   Sat Jan 22 10:14:47 2022 -0600

    ♻️ Adjust LCD init, contrast default, settings load

commit de0bc19230a0d253fd6d6f4a945a465abf67ab70
Author: Keith Bennett <[email protected]>
Date:   Thu Mar 10 15:20:13 2022 -0800

    🚸 TH3D EZBoard V2 TMC slave addresses (#23857)

commit 17099e797334abeb0cd92156e32af1e9e5d671ee
Author: John Lagonikas <[email protected]>
Date:   Thu Jan 20 13:58:36 2022 +0200

    🩹 Fix power.h compile (#23573)

commit 63f3e347d999767f98810955621847a989f642ac
Author: Scott Lahteine <[email protected]>
Date:   Wed Jan 19 18:33:19 2022 -0600

    🩹 BOARD_INIT followup

commit 32ff8c1489e658c2c29c8664ccee04d988c9f4ca
Author: Scott Lahteine <[email protected]>
Date:   Wed Jan 19 05:12:03 2022 -0600

    🧑‍💻 Add chmod to mfprep

commit 369ba99fdb95887371e3fcac3e88b8fb6e980b81
Author: Scott Lahteine <[email protected]>
Date:   Wed Jan 19 05:11:06 2022 -0600

    🩹 Fix Robin Nano BOARD_INIT

commit f33ec4aacfff4af61879d8cd2de66e03706e1b84
Author: Scott Lahteine <[email protected]>
Date:   Mon Feb 15 04:10:17 2021 -0600

    📝 Tweak G26 Q description

commit 1d0ca179b54efed64e6951fc93e974ee92df9a9e
Author: Scott Lahteine <[email protected]>
Date:   Wed Jan 19 03:27:10 2022 -0600

    🎨 LCD_SCREEN_ROT_* => LCD_SCREEN_ROTATE

commit 8ea172cafeed9d39afe5dbdda3aec6e876d9b513
Author: Scott Lahteine <[email protected]>
Date:   Wed Jan 19 02:20:32 2022 -0600

    🎨 Misc. style and cleanup

commit 7b4f5108ace3e4a8891613465e86602f0b2ce5c1
Author: John Lagonikas <[email protected]>
Date:   Wed Jan 19 10:13:47 2022 +0200

    🐛 Fix conditional M81 suicide (#23549)

commit 6f82d1befbb8061fab4730b4d0adf7a745257959
Author: Scott Lahteine <[email protected]>
Date:   Tue Jan 18 03:18:37 2022 -0600

    📌 RAMPS AUX 1-2 headers (#23544)

commit 5d5be55ef9fd9607d5c02380890472df99039cf0
Author: Fahad Alduraibi <[email protected]>
Date:   Tue Jan 18 12:16:39 2022 +0300

    🐛 Fix RAMPS 1.4 Plus EXP headers (#23523)

commit e704de9bb05ac57011ac80700f7bd97c9d45eaff
Author: GHGiampy <[email protected]>
Date:   Tue Jan 18 07:56:11 2022 +0100

    ✨ Long filename open/create/write (#23526)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 8695f462b757eb0762d9b108f2329ebc9f7e1678
Author: A. Herlas <[email protected]>
Date:   Sun Jan 16 06:08:31 2022 +0100

    ✨ Z Offset Wizard for TFT_LVGL_UI (English) (#23489)

commit d8c5e49281ccb20ca1d4c77342cbed1594b51831
Author: Ave6683 <[email protected]>
Date:   Mon Dec 27 22:28:27 2021 +0100

    ✨ MagLev V4 probe by MDD (#23192)

commit 4e72df9a28aeddd3a4e51fc031b602eda2bd0a4b
Author: Salvatore Bramante <[email protected]>
Date:   Tue Jan 18 10:09:06 2022 +0100

    🐛 Fix Octopus v1.x probe pin (#23548)

commit ac6c1a9e1266ff1b66715785d989e78f4133547b
Author: Scott Lahteine <[email protected]>
Date:   Tue Jan 18 03:01:09 2022 -0600

    💥 Generalize extra debugging

commit 3f4112aee41dccc32cd781a8b4cfeb7d0e5a1400
Author: Taylor Talkington <[email protected]>
Date:   Mon Jan 17 08:07:45 2022 -0500

    💄 Improve Ender3 v2 DWIN MarlinUI (#23369)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 31ec8f2449e28caaa064d0bf4885f26e45508c02
Author: Keith Bennett <[email protected]>
Date:   Tue Jan 18 00:30:52 2022 -0800

    🔨 Suppressible CONFIGURATION_EMBEDDING warning (#23545)

commit d18558bbd31f963014b759aee5a59b001b74365c
Author: John Lagonikas <[email protected]>
Date:   Mon Jan 17 14:56:25 2022 +0200

    🚸 Suppressible pin warnings (#23530)

    Co-authored-by: Scott Lahteine <[email protected]>

commit 70f03ad852ae0453afdd532e96775aecf51c6319
Author: zerkix <[email protected]>
Date:   Mon Jan 17 07:05:31 2022 +0100

    🐛 Finish and organize temp sensors (#23519)

    Co-authored-by: Scott Lahteine <[email protected]>

commit ab40c998931a8c0b5c0693c2a828bc239c70adb2
Author: Anson Liu <[email protected]>
Date:   Mon Jan 17 00:39:09 2022 -0500

    🐛 Fix Ultimain 2 E-autofan pin mapping (#23466)

commit 420f0749150a2cc280239a2ad2335a0f6d6b3560
Author: Miguel Risco-Castillo <[email protected]>
Date:   Mon Jan 17 00:36:03 2022 -0500

    🐛 Fix PLR for E3V2 Enhanced UI (#23543)

commit 4f2ed6732446f28cbab31c3b6e02cd7d550a271c
Author: Taylor Talkington <[email protected]>
Date:   Mon Jan 17 00:34:50 2022 -0500

    💄 MarlinUI+DOGM leveled bed bitmaps (#23539)

commit a80cafbcfcad382a88db4e0d2ac8657cf3a62c39
Author: Sola <[email protected]>
Date:   Sun Jan 16 13:07:37 2022 +0800

    ⚡️ SPI+DMA+interrupt method (STM32 / MKS UI) (#23464)

commit 01cb7c19f9bc959a18190d6c8b9efc7a121246ce
Author: Mike La Spina <[email protected]>
Date:   Sat Jan 15 23:05:53 2022 -0600

    🐛 Fix, improve PWM on AVR (#23520)

commit 44249b1380e8d0393c366b75d7b18b45318c6b94
Author: Scott Lahteine <[email protected]>
Date:   Fri Jan 14 06:16:14 2022 -0600

    🔧 Skip unused axis names

commit d7287e7db838d9027c86118a5089dd47591b2795
Author: George Fu <[email protected]>
Date:   Fri Jan 14 18:10:35 2022 +0800

    🔨 Set upload_command for CHEETAH v20 (#23515)

commit cf654bbba218c747d34a559b6555462bf65c46cb
Author: Scott Lahteine <[email protected]>
Date:   Fri Jan 14 03:43:14 2022 -0600

    🩹 Followup to extra axes

commit 5617edbb968650762dd02425856e2891bafefd80
Author: Scott Lahteine <[email protected]>
Date:   Fri Jan 14 03:14:13 2022 -0600

    🧑‍💻 Misc. updates for extra axes (#23521)

commit 39e4310c7bc108444fbcbaa09386b63c9910ab30
Author: Mike La Spina <[email protected]>
Date:   Wed Jan 12 17:28:53 2022 -0600

    🐛 Fix, improve PWM on AVR (#23463)

commit 0204547c090767beb6eaa470c8f98e7b0a5aede8
Author: Lefteris Garyfalakis <[email protected]>
Date:   Wed Jan 12 18:22:00 2022 +0200

    🚸 Fix E3V2 Enhanced UI time labels (#23502)

commit 7b79d53de0c416d6a4b8817dd35d6b945dbd1ab7
Author: Scott Lahteine <[email protected]>
Date:   Mon Jan 10 20:29:09 2022 -0600

    🎨 Misc. spindle/laser adjustments

commit c478ed08c886475735b7fc11769e4c504306dbb2
Author: Scott Lahteine <[email protected]>
Date:   Mon Jan 10 19:49:54 2022 -0600

    🧑‍💻 Adjust FastIO AVR timer enums, macros

commit 67e5298a340d927115f983ce10aa16624302d91c
Author: GHGiampy <[email protected]>
Date:   Sun Jan 9 08:14:03 2022 +0100

    ✨ Firmware Upload via Binary Transfer (#23462)

commit 2ca1d844d7d6b7309216b87eea740bd05d75c9ef
Author: John Lagonikas <[email protected]>
Date:   Sun Jan 2 02:18:07 2022 +0200

    ✨ Temperature variance monitor (#23373)

commit b435487da7656e8fecf7add9f88f6be779389b04
Author: mistic100 <[email protected]>
Date:   Sat Jan 8 10:51:21 2022 +0100

    🚸 Wait for cooldown in MarlinUI power-off (#23476)

commit d7b7b570c77d2725877124661167224dcf72be5d
Author: Scott Lahteine <[email protected]>
Date:   Thu Jan 6 05:07:47 2022 -0600

    🎨 Misc. cleanup, comments

commit 2690bb1bc29df31a297976be29922147b76d69d3
Author: John Lagonikas <[email protected]>
Date:   Mon Jan 3 18:11:39 2022 +0200

    ✨ M81 D / S - Power-off Delay (#23396, #23455)

commit b6c37960e8840c5d777cfc683d34bd1e206ae03a
Author: Scott Lahteine <[email protected]>
Date:   Mon Jan 10 19:49:03 2022 -0600

    📝 KHz => kHz (#23512)
ogdhekne pushed a commit to ogdhekne/Marlin that referenced this pull request Mar 25, 2024
@salva00
🐛 Fix Octopus v1.x probe pin (MarlinFirmware#23548)
59062fe
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
A: STM32 C: Boards/Pins PR: Bug Fix
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
3 participants
@salva00 @thisiskeithb @thinkyhead