Skip to content

iterati/primer

Repository files navigation

Primer and Tekton

Primer is a Work In Progress firmware for the OSM Microlight ans Tekton is a GUI for configuring the light in real time.

  • Primer requires Arduino 1.6.4 or higher
  • Tekton requires Processing 3.0.1 or higher

Features

  • 62 patterns to chose from
  • 47 customizable (with Tekton) color palette (plus a blank) with 4 shading levels per color
  • Each pattern supports up to 16 colors each
  • 4 accelerometer triggers with 3 sensitivity settings
  • 16 mode slots with 2 variations (pattern + colors) per slot
  • 4 fully custimizable mode playlists (bundles) with 16 slots each
  • Toggle Conjuring Mode (single-press on/off) for any preset
  • Easy to use GUI customization
  • Easy to use on-chip customization
  • Save, load, and share your custom palettes, modes, and preset playlists
  • Upload yours or your friends' patterns to your lights or download your at-show customizations when you get home