home-assistant · sairon · Dec 2, 2024 · Nov 25, 2024 · Dec 2, 2024 · Dec 2, 2024
diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml
@@ -144,7 +144,7 @@ jobs:
             username: ${{ github.repository_owner }}
             password: ${{ secrets.GITHUB_TOKEN }}
       - name: Build and Push
-        uses: docker/build-push-action@v6.9.0
+        uses: docker/build-push-action@v6.10.0
         id: build_haos_builder
         with:
           context: .

diff --git a/Documentation/kernel.md b/Documentation/kernel.md
@@ -3,22 +3,22 @@
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 6.6.62 |
+| Open Virtual Appliance | 6.6.63 |
 | Raspberry Pi | 6.6.51 |
 | Raspberry Pi 0-W | 6.6.51 |
 | Raspberry Pi 2 | 6.6.51 |
 | Raspberry Pi 3 | 6.6.51 |
 | Raspberry Pi 4 | 6.6.51 |
 | Raspberry Pi 5 | 6.6.51 |
 | Home Assistant Yellow | 6.6.51 |
-| Home Assistant Green | 6.6.62 |
-| Tinker Board | 6.6.62 |
-| ODROID-C2 | 6.6.62 |
-| ODROID-C4 | 6.6.62 |
-| ODROID-M1 | 6.6.62 |
-| ODROID-M1S | 6.6.62 |
-| ODROID-N2 | 6.6.62 |
-| ODROID-XU4 | 6.6.62 |
-| Generic aarch64 | 6.6.62 |
-| Generic x86-64 | 6.6.62 |
-| Khadas VIM3 | 6.6.62 |
+| Home Assistant Green | 6.6.63 |
+| Tinker Board | 6.6.63 |
+| ODROID-C2 | 6.6.63 |
+| ODROID-C4 | 6.6.63 |
+| ODROID-M1 | 6.6.63 |
+| ODROID-M1S | 6.6.63 |
+| ODROID-N2 | 6.6.63 |
+| ODROID-XU4 | 6.6.63 |
+| Generic aarch64 | 6.6.63 |
+| Generic x86-64 | 6.6.63 |
+| Khadas VIM3 | 6.6.63 |
diff --git a/...rypi/yellow/patches/linux/0018-ARM-dts-bcm2712-yellow-Disable-SD-SDIO-modes-on-eMMC.patch b/...rypi/yellow/patches/linux/0018-ARM-dts-bcm2712-yellow-Disable-SD-SDIO-modes-on-eMMC.patch
@@ -0,0 +1,44 @@
+From 9639a7a0f20cbd4a7b9968f6a3ede4727d96d297 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20=C4=8Cerm=C3=A1k?= <[email protected]>
+Date: Thu, 28 Nov 2024 18:05:55 +0100
+Subject: [PATCH] ARM: dts: bcm2712: yellow: Disable SD/SDIO modes on eMMC
+ interface
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+If the eMMC card is not initialized properly (probably a side-effect of its
+usage in U-Boot), every command sent to it takes over 10 seconds before
+timeout. With SD and SDIO modes not disabled in the device tree, it takes up
+over 130 seconds before the card is reset. Disabling these two modes reduces
+this by 100 seconds.
+
+While this is added as a partial workaround for the issue, disabling these mode
+should make no harm anyway.
+
+Signed-off-by: Jan Čermák <[email protected]>
+---
+ .../boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts    | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts
+index c85d608da2043..189c17fe2028e 100644
+--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts
+@@ -851,6 +851,16 @@ &rp1_usb1 {
+ 	status = "disabled";
+ };
+
++/*
++ * Yellow doesn't need to use eMMC interface as SD/SDIO, disable those
++ * modes to speed up boot. This is particularly handy to work around
++ * an issue with eMMC initialization but won't harm in general.
++ */
++&sdio1 {
++	no-sdio;
++	no-sd;
++};
++
+ &leds {
+ 	led_act: led-act {
+ 		label = "act";
diff --git a/...rypi/yellow/patches/linux/0019-ARM-dts-bcm2712-yellow-Disable-CQE-on-eMMC-interface.patch b/...rypi/yellow/patches/linux/0019-ARM-dts-bcm2712-yellow-Disable-CQE-on-eMMC-interface.patch
@@ -0,0 +1,50 @@
+From 0d9aed86fbaf650cf15ea0977e05cee2980ed054 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20=C4=8Cerm=C3=A1k?= <[email protected]>
+Date: Mon, 2 Dec 2024 16:07:00 +0100
+Subject: [PATCH] ARM: dts: bcm2712: yellow: Disable CQE on eMMC interface
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Testing shows that enabling CQE causes random hangs on I/O operations, often
+during the swap boostrapping on the first boot:
+
+[  242.826099]       Tainted: G         C         6.6.51-haos-raspi #54
+[  242.832463] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+[  242.840429] INFO: task jbd2/mmcblk0p7-:300 blocked for more than 120 seconds.
+[  242.847572]       Tainted: G         C         6.6.51-haos-raspi #54
+[  242.853928] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+[  242.861789] INFO: task jbd2/mmcblk0p8-:344 blocked for more than 120 seconds.
+[  242.868926]       Tainted: G         C         6.6.51-haos-raspi #54
+[  242.875277] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+[  242.883149] INFO: task systemd-timesyn:569 blocked for more than 120 seconds.
+[  242.890282]       Tainted: G         C         6.6.51-haos-raspi #54
+[  242.896628] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+[  242.904522] INFO: task dockerd:606 blocked for more than 120 seconds.
+[  242.910958]       Tainted: G         C         6.6.51-haos-raspi #54
+[  242.917304] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+[  242.925200] INFO: task runc:[2:INIT]:1504 blocked for more than 120 seconds.
+[  242.932249]       Tainted: G         C         6.6.51-haos-raspi #54
+[  242.938595] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+
+This is a known issue currently for some SD cards but it hasn't been
+acknowledged for eMMC yet. By removing the CQE capability, the issue seems to
+go away.
+
+Signed-off-by: Jan Čermák <[email protected]>
+---
+ arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts
+index 189c17fe2028e..469d0fdc971a8 100644
+--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5-ha-yellow.dts
+@@ -352,7 +352,6 @@ &sdio1 {
+ 	mmc-hs400-1_8v;
+ 	mmc-hs400-enhanced-strobe;
+ 	broken-cd;
+-	supports-cqe;
+ 	status = "okay";
+ };
+
diff --git a/buildroot-external/configs/generic_aarch64_defconfig b/buildroot-external/configs/generic_aarch64_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64 $(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y

diff --git a/buildroot-external/configs/generic_x86_64_defconfig b/buildroot-external/configs/generic_x86_64_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y

diff --git a/buildroot-external/configs/green_defconfig b/buildroot-external/configs/green_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/nabucasa/green $(BR2_EXTERNAL_HASSOS_PATH)/board/nabucasa/green/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/kernel-arm64-rockchip.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/nabucasa/green/kernel.config"

diff --git a/buildroot-external/configs/khadas_vim3_defconfig b/buildroot-external/configs/khadas_vim3_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/vim3 $(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/vim3/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/kernel-vim.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config"

diff --git a/buildroot-external/configs/odroid_c2_defconfig b/buildroot-external/configs/odroid_c2_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config"

diff --git a/buildroot-external/configs/odroid_c4_defconfig b/buildroot-external/configs/odroid_c4_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config"

diff --git a/buildroot-external/configs/odroid_m1_defconfig b/buildroot-external/configs/odroid_m1_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/kernel-arm64-rockchip.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1/kernel.config"

diff --git a/buildroot-external/configs/odroid_m1s_defconfig b/buildroot-external/configs/odroid_m1s_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1s $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1s/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/kernel-arm64-rockchip.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1s/kernel.config"

diff --git a/buildroot-external/configs/odroid_n2_defconfig b/buildroot-external/configs/odroid_n2_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/kernel.config"

diff --git a/buildroot-external/configs/odroid_xu4_defconfig b/buildroot-external/configs/odroid_xu4_defconfig
@@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y

diff --git a/buildroot-external/configs/ova_defconfig b/buildroot-external/configs/ova_defconfig
@@ -16,7 +16,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y

diff --git a/buildroot-external/configs/tinker_defconfig b/buildroot-external/configs/tinker_defconfig
@@ -18,7 +18,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker $(BR2_EXTERNAL_HASSOS_PATH)/board/asus/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.62"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.63"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.6.y/device-support-wireless.config"

diff --git a/buildroot-external/meta b/buildroot-external/meta
@@ -1,6 +1,6 @@
 VERSION_MAJOR="14"
 VERSION_MINOR="0"
-VERSION_SUFFIX="rc2"
+VERSION_SUFFIX="rc3"
 
 HASSOS_NAME="Home Assistant OS"
 HASSOS_ID="haos"