Add support for one-way FPGA advertisement pin

apollo_fpga/__init__.py

@@ -4,6 +4,8 @@
 # Copyright (c) 2020 Great Scott Gadgets <[email protected]>
 # SPDX-License-Identifier: BSD-3-Clause
 
+import os
+import time
 import usb.core
 
 from .jtag  import JTAGChain
@@ -32,13 +34,18 @@ def create_ila_frontend(ila, *, use_cs_multiplexing=False):
 class ApolloDebugger:
     """ Class representing a link to an Apollo Debug Module. """
 
-    # This VID/PID pair is unique to development LUNA boards.
-    # TODO: potentially change this to an OpenMoko VID, like other LUNA boards.
-    USB_IDS  = [(0x1d50, 0x615c), (0x16d0, 0x05a5)]
+    # VID/PID pairs for Apollo and gateware.
+    APOLLO_USB_IDS = [(0x1d50, 0x615c)]
+    LUNA_USB_IDS   = [(0x1d50, 0x615b)]
+
+    # If we have a LUNA_USB_IDS variable, we can use it to find the LUNA device.
+    if os.getenv("LUNA_USB_IDS"):
+        LUNA_USB_IDS += [tuple([int(x, 16) for x in os.getenv("LUNA_USB_IDS").split(":")])]
 
     REQUEST_SET_LED_PATTERN    = 0xa1
     REQUEST_RECONFIGURE        = 0xc0
     REQUEST_FORCE_FPGA_OFFLINE = 0xc1
+    REQUEST_HONOR_FPGA_ADV     = 0xc2
 
     LED_PATTERN_IDLE = 500
     LED_PATTERN_UPLOAD = 50
@@ -69,11 +76,35 @@ def __init__(self):
         """ Sets up a connection to the debugger. """
 
         # Try to create a connection to our Apollo debug firmware.
-        for vid, pid in self.USB_IDS:
+        for vid, pid in self.APOLLO_USB_IDS:
             device = usb.core.find(idVendor=vid, idProduct=pid)
             if device is not None:
                 break
 
+        # If no Apollo VID/PID is found but a gateware VID/PID is, we request the gateware
+        # to liberate the USB port. In devices with a shared port, this effectively hands off 
+        # the USB port to Apollo.
+        find_again = False
+        if device is None:
+            for vid, pid in self.LUNA_USB_IDS:
+                fpga_device = usb.core.find(idVendor=vid, idProduct=pid)
+                if fpga_device is None:
+                    continue
+                for cfg in fpga_device:
+                    intf = usb.util.find_descriptor(cfg, bInterfaceClass=0xFF, bInterfaceSubClass=0x00)
+                    if intf is None:
+                        continue
+                    find_again = self._request_handoff_to_apollo(fpga_device, intf.bInterfaceNumber)
+                    break
+
+        # If we requested a handoff, retry the connection to Apollo debug firmware
+        if find_again:
+            time.sleep(2)  # wait for Apollo enumeration
+            for vid, pid in self.APOLLO_USB_IDS:
+                device = usb.core.find(idVendor=vid, idProduct=pid)
+                if device is not None:
+                    break
+
         # If we couldn't find an Apollo device, bail out.
         if device is None:
             raise DebuggerNotFound()
@@ -93,6 +124,17 @@ def __init__(self):
             self.registers = self.spi
 
 
+    @staticmethod
+    def _request_handoff_to_apollo(device, intf_number):
+        """ Requests the gateware to liberate the USB port. """
+        REQUEST_APOLLO_ADV_STOP = 0xF0
+        request_type = usb.ENDPOINT_OUT | usb.RECIP_INTERFACE | usb.TYPE_VENDOR
+        try:
+            device.ctrl_transfer(request_type, REQUEST_APOLLO_ADV_STOP, wIndex=intf_number, timeout=5000)
+        except usb.USBError:
+            return False
+        return True
+
 
     def detect_connected_version(self):
         """ Attempts to determine the revision of the connected hardware.
@@ -235,6 +277,10 @@ def force_fpga_offline(self):
         """ Resets the target (FPGA/etc) connected to the debug controller. """
         self.out_request(self.REQUEST_FORCE_FPGA_OFFLINE)
 
+    def honor_fpga_adv(self):
+        """ Tell Apollo to honor requests from FPGA_ADV again. Useful after reconfiguration. """
+        self.out_request(self.REQUEST_HONOR_FPGA_ADV)
+
     def close(self):
         """ Closes the USB device so it can be reused, possibly by another ApolloDebugger """
 

apollo_fpga/commands/cli.py

@@ -130,6 +130,9 @@ def configure_fpga(device, args):
 
         programmer.configure(bitstream)
 
+    # Let the LUNA gateware take over in devices with shared USB port
+    device.honor_fpga_adv()
+
 
 def ensure_unconfigured(device):
     with device.jtag as jtag:
@@ -210,6 +213,9 @@ def reconfigure_fpga(device, args):
     """ Command that requests the attached ECP5 reconfigure itself from its SPI flash. """
     device.soft_reset()
 
+    # Let the LUNA gateware take over in devices with shared USB port
+    device.honor_fpga_adv()
+
 
 def force_fpga_offline(device, args):
     """ Command that requests the attached ECP5 be held unconfigured. """

apollo_fpga/gateware/__init__.py

@@ -0,0 +1 @@
+from .advertiser import ApolloAdvertiser

apollo_fpga/gateware/advertiser.py

@@ -0,0 +1,101 @@
+#
+# This file is part of LUNA.
+#
+# Copyright (c) 2023 Great Scott Gadgets <[email protected]>
+# SPDX-License-Identifier: BSD-3-Clause
+
+""" Controllers for communicating with Apollo through the FPGA_ADV pin """
+
+from amaranth                       import Elaboratable, Module, Signal, Mux
+from amaranth_stdio.serial          import AsyncSerialTX
+
+from luna.gateware.usb.usb2.request import USBRequestHandler
+from usb_protocol.types             import USBRequestType, USBRequestRecipient
+
+
+class ApolloAdvertiser(Elaboratable):
+    """ Gateware that implements a periodic announcement to Apollo using the FPGA_ADV pin.
+
+    Currently it is used to tell Apollo that the gateware wants to use the CONTROL port.
+    Apollo will keep the port switch connected to the FPGA after a reset as long as this 
+    message is received periodically.
+    Once the port is lost, Apollo will ignore further messages until a specific vendor 
+    request is called.
+
+    I/O ports:
+        I: stop -- Advertisement messages are stopped if this line is asserted.
+    """
+    def __init__(self):
+        self.stop = Signal()
+
+    def default_request_handler(self, if_number):
+        return ApolloAdvertiserRequestHandler(if_number, self.stop)
+
+    def elaborate(self, platform):
+        m = Module()
+
+        clk_freq = platform.DEFAULT_CLOCK_FREQUENCIES_MHZ["sync"] * 1e6
+
+        # Communication is done with a serial transmitter (unidirectional)
+        baudrate = 9600
+        divisor  = int(clk_freq // baudrate)
+        fpga_adv = AsyncSerialTX(divisor=divisor, data_bits=8, parity="even")
+        m.submodules += fpga_adv
+
+        # Counter with 50ms period
+        period    = int(clk_freq * 50e-3)
+        timer     = Signal(range(period))
+        m.d.sync += timer.eq(Mux(timer == period-1, 0, timer+1))
+
+        # Trigger announcement when the counter overflows
+        m.d.comb += [
+            fpga_adv.data .eq(ord('A')),
+            fpga_adv.ack  .eq((timer == 0) & ~self.stop),
+        ]
+
+        # Drive the FPGA_ADV pin with the serial transmitter
+        m.d.comb += platform.request("int").o.eq(fpga_adv.o)
+
+        return m
+
+
+class ApolloAdvertiserRequestHandler(USBRequestHandler):
+    """ Request handler for ApolloAdvertiser. 
+
+    Implements default vendor requests related to ApolloAdvertiser.
+    """
+    REQUEST_APOLLO_ADV_STOP = 0xF0
+
+    def __init__(self, if_number, stop_pin):
+        super().__init__()
+        self.if_number = if_number
+        self.stop_pin  = stop_pin
+
+    def elaborate(self, platform):
+        m = Module()
+
+        interface         = self.interface
+        setup             = self.interface.setup
+
+        #
+        # Vendor request handlers.
+
+        with m.If((setup.type == USBRequestType.VENDOR) & \
+                  (setup.recipient == USBRequestRecipient.INTERFACE) & \
+                  (setup.index == self.if_number)):
+
+            with m.If(setup.request == self.REQUEST_APOLLO_ADV_STOP):
+
+                # Notify that we want to manage this request
+                m.d.comb += interface.claim.eq(1)
+
+                # Once the receive is complete, respond with an ACK.
+                with m.If(interface.rx_ready_for_response):
+                    m.d.comb += interface.handshakes_out.ack.eq(1)
+
+                # If we reach the status stage, send a ZLP.
+                with m.If(interface.status_requested):
+                    m.d.comb += self.send_zlp()
+                    m.d.usb += self.stop_pin.eq(1)
+
+        return m

firmware/src/boards/cynthion_d11/fpga_adv.c

@@ -0,0 +1,153 @@
+/**
+ * FPGA advertisement pin handling code.
+ *
+ * This file is part of Apollo.
+ *
+ * Copyright (c) 2023 Great Scott Gadgets <[email protected]>
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "fpga_adv.h"
+#include "usb_switch.h"
+#include "apollo_board.h"
+#include <hal/include/hal_gpio.h>
+
+#include <bsp/board_api.h>
+#include <hpl/pm/hpl_pm_base.h>
+#include <hpl/gclk/hpl_gclk_base.h>
+#include <peripheral_clk_config.h>
+
+#ifdef BOARD_HAS_USB_SWITCH
+
+// Store the timestamp of the last physical port advertisement
+#define TIMEOUT 100UL
+static uint32_t last_phy_adv = 0;
+
+// Create a reference to our SERCOM object.
+typedef Sercom sercom_t;
+static sercom_t *sercom = SERCOM1;
+
+static void fpga_adv_byte_received_cb(uint8_t byte, int parity_error);
+
+#endif
+
+/**
+ * Initialize FPGA_ADV receive-only serial port
+ */
+void fpga_adv_init(void)
+{
+#ifdef BOARD_HAS_USB_SWITCH
+	gpio_set_pin_direction(FPGA_ADV, GPIO_DIRECTION_IN);
+	gpio_set_pin_pull_mode(FPGA_ADV, GPIO_PULL_UP);
+
+	// Disable the SERCOM before configuring it, to 1) ensure we're not transacting
+	// during configuration; and 2) as many of the registers are R/O when the SERCOM is enabled.
+	while(sercom->USART.SYNCBUSY.bit.ENABLE);
+	sercom->USART.CTRLA.bit.ENABLE = 0;
+
+	// Software reset the SERCOM to restore initial values.
+	while(sercom->USART.SYNCBUSY.bit.SWRST);
+	sercom->USART.CTRLA.bit.SWRST = 1;
+
+	// The SWRST bit becomes accessible again once the software reset is
+	// complete -- we'll use this to wait for the reset to be finshed.
+	while(sercom->USART.SYNCBUSY.bit.SWRST);
+
+	// Ensure we can work with the full SERCOM.
+	while(sercom->USART.SYNCBUSY.bit.SWRST || sercom->USART.SYNCBUSY.bit.ENABLE);
+
+	// Pinmux the relevant pins to be used for the SERCOM.
+	gpio_set_pin_function(PIN_PA09, MUX_PA09C_SERCOM1_PAD3);
+
+	// Set up clocking for the SERCOM peripheral.
+	_pm_enable_bus_clock(PM_BUS_APBC, SERCOM1);
+	_gclk_enable_channel(SERCOM1_GCLK_ID_CORE, GCLK_CLKCTRL_GEN_GCLK0_Val);
+
+	// Configure the SERCOM for UART mode.
+	sercom->USART.CTRLA.reg =
+		SERCOM_USART_CTRLA_DORD     |          // LSB first
+		SERCOM_USART_CTRLA_RXPO(3)  |          // RX on PA09 (PAD[3])
+		SERCOM_USART_CTRLA_SAMPR(0) |          // use 16x oversampling
+		SERCOM_USART_CTRLA_FORM(1)	|          // enable parity
+		SERCOM_USART_CTRLA_RUNSTDBY |          // don't autosuspend the clock
+		SERCOM_USART_CTRLA_MODE_USART_INT_CLK; // use internal clock
+
+	// Configure our baud divisor.
+	const uint32_t baudrate = 9600;
+	const uint32_t baud = (((uint64_t)CONF_CPU_FREQUENCY << 16) - ((uint64_t)baudrate << 20)) / CONF_CPU_FREQUENCY;
+	sercom->USART.BAUD.reg = baud;
+
+	// Configure TX/RX and framing.
+	sercom->USART.CTRLB.reg =
+			SERCOM_USART_CTRLB_CHSIZE(0) | // 8-bit words
+			SERCOM_USART_CTRLB_RXEN;       // Enable RX.
+
+	// Wait for our changes to apply.
+	while (sercom->USART.SYNCBUSY.bit.CTRLB);
+
+	// Enable our receive interrupt, as we want to asynchronously dump data into
+	// the UART console.
+	sercom->USART.INTENSET.reg = SERCOM_USART_INTENSET_RXC;
+
+	// Enable the UART IRQ.
+	NVIC_EnableIRQ(SERCOM1_IRQn);
+
+	// Finally, enable the SERCOM.
+	sercom->USART.CTRLA.bit.ENABLE = 1;
+	while(sercom->USART.SYNCBUSY.bit.ENABLE);
+
+	// Update timestamp
+	last_phy_adv = board_millis();
+#endif
+}
+
+/**
+ * Task for things related with the advertisement pin
+ */
+void fpga_adv_task(void)
+{
+#ifdef BOARD_HAS_USB_SWITCH
+	// Take over USB after timeout
+	if (board_millis() - last_phy_adv < TIMEOUT) return;
+	take_over_usb();
+#endif
+}
+
+/**
+ * Honor requests from FPGA_ADV again
+ */
+void honor_fpga_adv(void)
+{
+#ifdef BOARD_HAS_USB_SWITCH
+	if (board_millis() - last_phy_adv < TIMEOUT) {
+		hand_off_usb();
+	}
+#endif
+}
+
+
+#ifdef BOARD_HAS_USB_SWITCH
+/**
+ * FPGA_ADV interrupt handler.
+ */
+void SERCOM1_Handler(void)
+{
+	// If we've just received a character, handle it.
+	if (sercom->USART.INTFLAG.bit.RXC)
+	{
+		// Read the relevant character, which marks this interrupt as serviced.
+		uint16_t byte = sercom->USART.DATA.reg;
+		fpga_adv_byte_received_cb(byte, sercom->USART.STATUS.bit.PERR);
+	}
+}
+
+static void fpga_adv_byte_received_cb(uint8_t byte, int parity_error) {
+	if (parity_error) {
+		return;
+	}
+
+	if (byte == 'A') {
+		last_phy_adv = board_millis();
+	}
+}
+#endif