Migrate configurable file references (#274)

Signed-off-by: methylDragon <[email protected]>

CMakeLists.txt

@@ -54,11 +54,11 @@ install(DIRECTORY tools/
 
 #--------------------------------------
 # Create configuration and installation variables
-set(gz_config_input  "${CMAKE_CURRENT_SOURCE_DIR}/config/ignition-cmake-config.cmake.in")
+set(gz_config_input  "${CMAKE_CURRENT_SOURCE_DIR}/config/gz-cmake-config.cmake.in")
 set(gz_config_output "${PROJECT_NAME_LOWER}-config.cmake")
 set(gz_version_output "${PROJECT_NAME_LOWER}-config-version.cmake")
 set(gz_config_install_dir "${CMAKE_INSTALL_DATAROOTDIR}/cmake/${PROJECT_NAME_LOWER}")
-set(ign_pkgconfig_input "${CMAKE_CURRENT_SOURCE_DIR}/config/ignition-cmake.pc.in")
+set(ign_pkgconfig_input "${CMAKE_CURRENT_SOURCE_DIR}/config/gz-cmake.pc.in")
 set(ign_pkgconfig_output "${CMAKE_BINARY_DIR}/${PROJECT_NAME}.pc")
 set(ign_pkgconfig_install_dir "${IGN_LIB_INSTALL_DIR}/pkgconfig")
 set(ign_utilities_target ${PROJECT_EXPORT_NAME}-utilities)

cmake/GzPackaging.cmake

@@ -178,8 +178,8 @@ endmacro()
 #       gz_add_component(~), so users of gz-cmake should not call this
 #       function.
 #
-# NOTE: For gz-cmake developers, the variables needed by ignition.pc.in or
-#       ignition-component.pc.in MUST be set before calling this function.
+# NOTE: For gz-cmake developers, the variables needed by gz.pc.in or
+#       gz-component.pc.in MUST be set before calling this function.
 #
 # Create a pkgconfig file for your target, and install it.
 function(_gz_create_pkgconfig)
@@ -197,10 +197,10 @@ function(_gz_create_pkgconfig)
   #------------------------------------
   # Choose which input file to use
   if(_gz_create_pkgconfig_COMPONENT)
-    set(pkgconfig_input "${IGNITION_CMAKE_DIR}/pkgconfig/ignition-component.pc.in")
+    set(pkgconfig_input "${IGNITION_CMAKE_DIR}/pkgconfig/gz-component.pc.in")
     set(target_name ${PROJECT_LIBRARY_TARGET_NAME}-${_gz_create_pkgconfig_COMPONENT})
   else()
-    set(pkgconfig_input "${IGNITION_CMAKE_DIR}/pkgconfig/ignition.pc.in")
+    set(pkgconfig_input "${IGNITION_CMAKE_DIR}/pkgconfig/gz.pc.in")
     set(target_name ${PROJECT_LIBRARY_TARGET_NAME})
   endif()
 
@@ -239,7 +239,7 @@ endfunction()
 #       function.
 #
 # NOTE: For gz-cmake developers, some of the variables needed by
-#       ignition-config.cmake.in or ignition-component-config.cmake.in MUST be
+#       gz-config.cmake.in or gz-component-config.cmake.in MUST be
 #       set before calling this function. The following variables are set
 #       automatically by this function:
 #       - import_target_name
@@ -270,20 +270,20 @@ function(_gz_create_cmake_package)
 
     set(component ${_gz_create_cmake_package_COMPONENT})
     set(target_name ${PROJECT_LIBRARY_TARGET_NAME}-${component})
-    set(gz_config_input "${IGNITION_CMAKE_DIR}/ignition-component-config.cmake.in")
+    set(gz_config_input "${IGNITION_CMAKE_DIR}/gz-component-config.cmake.in")
     set(simple_import_name ${component})
 
   elseif(_gz_create_cmake_package_ALL)
 
-    set(gz_config_input "${IGNITION_CMAKE_DIR}/ignition-all-config.cmake.in")
+    set(gz_config_input "${IGNITION_CMAKE_DIR}/gz-all-config.cmake.in")
     set(target_name ${PROJECT_LIBRARY_TARGET_NAME}-all)
     set(all_pkg_name ${PROJECT_LIBRARY_TARGET_NAME}-all)
     set(simple_import_name all)
 
   else()
 
     set(target_name ${PROJECT_LIBRARY_TARGET_NAME})
-    set(gz_config_input "${IGNITION_CMAKE_DIR}/ignition-config.cmake.in")
+    set(gz_config_input "${IGNITION_CMAKE_DIR}/gz-config.cmake.in")
     set(simple_import_name core)
 
   endif()
@@ -298,7 +298,7 @@ function(_gz_create_cmake_package)
 
   endif()
 
-  # This gets used by the ignition-*.config.cmake.in files
+  # This gets used by the gz-*.config.cmake.in files
   set(target_output_filename ${target_name}-targets.cmake)
   set(gz_config_output "${PROJECT_BINARY_DIR}/cmake/${target_name}-config.cmake")
   set(gz_version_output "${PROJECT_BINARY_DIR}/cmake/${target_name}-config-version.cmake")

cmake/GzUtils.cmake

@@ -699,7 +699,7 @@ endfunction()
 # ${IGN_DESIGNATION}.hh. This will only add them to the header, it will not
 # generate or install them.
 #
-# This will also run configure_file on ign_auto_headers.hh.in and config.hh.in
+# This will also run configure_file on gz_auto_headers.hh.in and config.hh.in
 # and install them. This will NOT install any other files or directories that
 # appear in the ${CMAKE_CURRENT_BINARY_DIR}.
 #
@@ -821,7 +821,7 @@ function(gz_install_all_headers)
     set(meta_header_install_dir ${IGN_INCLUDE_INSTALL_DIR_FULL}/${PROJECT_INCLUDE_DIR}/${component_name})
 
     # Define the input/output of the configuration for the component "master" header
-    set(master_header_in ${IGNITION_CMAKE_DIR}/ign_auto_headers.hh.in)
+    set(master_header_in ${IGNITION_CMAKE_DIR}/gz_auto_headers.hh.in)
     set(master_header_out ${CMAKE_CURRENT_BINARY_DIR}/${component_name}.hh)
 
   else()
@@ -830,7 +830,7 @@ function(gz_install_all_headers)
     set(meta_header_install_dir ${IGN_INCLUDE_INSTALL_DIR_FULL}/${PROJECT_INCLUDE_DIR})
 
     # Define the input/output of the configuration for the core "master" header
-    set(master_header_in ${IGNITION_CMAKE_DIR}/ign_auto_headers.hh.in)
+    set(master_header_in ${IGNITION_CMAKE_DIR}/gz_auto_headers.hh.in)
     set(master_header_out ${CMAKE_CURRENT_BINARY_DIR}/../${IGN_DESIGNATION}.hh)
 
   endif()
@@ -1377,7 +1377,7 @@ function(gz_add_component component_name)
   endif()
 
   #------------------------------------
-  # Set variables that are needed by cmake/ignition-component-config.cmake.in
+  # Set variables that are needed by cmake/gz-component-config.cmake.in
   set(component_pkg_name ${component_target_name})
   if(gz_add_component_INTERFACE)
     set(component_pkgconfig_lib)
@@ -1389,7 +1389,7 @@ function(gz_add_component component_name)
   # variable is used in config files
   set(component_name ${component_name})
 
-  # ... and by cmake/pkgconfig/ignition-component.pc.in
+  # ... and by cmake/pkgconfig/gz-component.pc.in
   set(component_pkgconfig_requires ${${component_name}_PKGCONFIG_REQUIRES})
   set(component_pkgconfig_requires_private ${${component_name}_PKGCONFIG_REQUIRES_PRIVATE})
   set(component_pkgconfig_lib_deps ${${component_name}_PKGCONFIG_LIBS})
@@ -1437,7 +1437,7 @@ endfunction()
 # Exports the `all` target. This function is private to gz-cmake.
 function(_gz_export_target_all)
 
-  # find_all_pkg_components is used as a variable in ignition-all-config.cmake.in
+  # find_all_pkg_components is used as a variable in gz-all-config.cmake.in
   set(find_all_pkg_components "")
   get_property(all_known_components TARGET ${PROJECT_LIBRARY_TARGET_NAME}-all
     PROPERTY INTERFACE_IGN_ALL_KNOWN_COMPONENTS)

cmake/gz_auto_headers.hh.in

@@ -17,7 +17,7 @@
 
 //                ****** Do not modify this file. ******
 // This file is automatically generated by CMake. Changes should instead be
-// made to cmake/ign_auto_headers.hh.in in gz-cmake
+// made to cmake/gz_auto_headers.hh.in in gz-cmake
 
 #include <@PROJECT_INCLUDE_DIR@/config.hh>
 ${ign_headers}

examples/find_ogre2/ogre-2.1/CMakeLists.txt

@@ -5,7 +5,7 @@ find_package(gz-cmake3 REQUIRED)
 
 message(STATUS "Finding OGRE 2.1")
 
-gz_find_package(IgnOGRE2 VERSION 2.1.0
+gz_find_package(GzOGRE2 VERSION 2.1.0
     COMPONENTS HlmsPbs HlmsUnlit Overlay)
 
 message(STATUS "OGRE2_FOUND: " ${OGRE2_FOUND})

examples/find_ogre2/ogre-2.2/CMakeLists.txt

@@ -5,7 +5,7 @@ find_package(gz-cmake3 REQUIRED)
 
 message(STATUS "Finding OGRE 2.2")
 
-gz_find_package(IgnOGRE2 VERSION 2.2.0
+gz_find_package(GzOGRE2 VERSION 2.2.0
     COMPONENTS HlmsPbs HlmsUnlit Overlay)
 
 message(STATUS "OGRE2_FOUND: " ${OGRE2_FOUND})

test/cmake_minimum_required.bash

@@ -3,18 +3,18 @@
 
 export CMAKE_FILES_TO_CHECK="
   $1/CMakeLists.txt
-  $1/cmake/ignition-all-config.cmake.in
-  $1/cmake/ignition-component-config.cmake.in
-  $1/cmake/ignition-config.cmake.in
-  $1/config/ignition-cmake-config.cmake.in"
+  $1/cmake/gz-all-config.cmake.in
+  $1/cmake/gz-component-config.cmake.in
+  $1/cmake/gz-config.cmake.in
+  $1/config/gz-cmake-config.cmake.in"
 unset TEST_CMAKE_MIN_REQUIRED_FAILED
 # first argument is root of gz-cmake repository
 if [[ ! -d "$1"  \
    || ! -a "$1/CMakeLists.txt" \
-   || ! -a "$1/cmake/ignition-all-config.cmake.in" \
-   || ! -a "$1/cmake/ignition-component-config.cmake.in" \
-   || ! -a "$1/cmake/ignition-config.cmake.in" \
-   || ! -a "$1/config/ignition-cmake-config.cmake.in" ]]; then
+   || ! -a "$1/cmake/gz-all-config.cmake.in" \
+   || ! -a "$1/cmake/gz-component-config.cmake.in" \
+   || ! -a "$1/cmake/gz-config.cmake.in" \
+   || ! -a "$1/config/gz-cmake-config.cmake.in" ]]; then
   echo the first argument must be the root of the gz-cmake repository
   export TEST_CMAKE_MIN_REQUIRED_FAILED=1
 else