Get Navi10 card working on FreeBSD #12
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
It seems that a delay of 20 milliseconds is too quick for a NAVI10 graphics card. This increases the delay 10-fold, which is probably too much and can probably be turned down, but this at least gets the firmare loaded.
There are a couple of calls to floating point types as the DCN 20 research pool is constructed and initializated. These operations need to be wrapped by a calls signaling to the kernel to enter an FPU context. These two locations is a balance between entering on each FPU line versus locking at a higher level. The dcn20_validate_bandwidth() function calls many additional functions that also use the FPU. While we could wrap each of those, it seems cleaner and less resource intensive to just wrap at the top level of the function. With this change my AMD Raedeon RX 5700 XT is recognized and attached.
|
LGTM but could you wrap the changes around some #ifdef FreeBSD please ? |
I also was able to get shave the wait time down a little.
|
Added the #ifdefs and was able to bring down the wait time since I had to reboot to test it. Let me know if I should do the ifdefs a different way. |
evadot
pushed a commit
that referenced
this pull request
Mar 29, 2022
Prior to sanitizing the GGTT, the only operations allowed in intel_display_init_nogem() are those to reserve the preallocated (and active) regions in the GGTT leftover from the BIOS. Trying to allocate a GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset) may then conflict with other preallocated regions that have not yet been protected. Move the initial modesetting from the end of init_nogem to the beginning of init so that any vma pinning (either framebuffers or DSB, for example), is after the GGTT is ready to handle it. This will prevent the DSB object from being destroyed too early: [ 53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345 [ 53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G W 5.10.0-rc5+ #12 [ 53.449409] Call Trace: [ 53.449418] dump_stack+0x9a/0xcc [ 53.449558] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449565] print_address_description.constprop.0+0x3e/0x60 [ 53.449577] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 53.449718] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449849] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449857] kasan_report.cold+0x1f/0x37 [ 53.449993] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450130] i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450273] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] [ 53.450281] ? static_obj+0x69/0x80 [ 53.450289] ? lockdep_init_map_waits+0xa9/0x310 [ 53.450431] ? intel_wopcm_init+0x96/0x3d0 [i915] [ 53.450581] ? i915_gem_init+0x75/0x2d0 [i915] [ 53.450720] i915_gem_init+0x75/0x2d0 [i915] [ 53.450852] i915_driver_probe+0x8c2/0x1210 [i915] [ 53.450993] ? i915_pm_prepare+0x630/0x630 [i915] [ 53.451006] ? check_chain_key+0x1e7/0x2e0 [ 53.451025] ? __pm_runtime_resume+0x58/0xb0 [ 53.451157] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.451285] ? i915_pci_remove+0x40/0x40 [i915] [ 53.451295] ? lockdep_hardirqs_on_prepare+0x124/0x230 [ 53.451302] ? _raw_spin_unlock_irqrestore+0x42/0x50 [ 53.451309] ? lockdep_hardirqs_on+0xbf/0x130 [ 53.451315] ? preempt_count_sub+0xf/0xb0 [ 53.451321] ? _raw_spin_unlock_irqrestore+0x2f/0x50 [ 53.451335] pci_device_probe+0xf9/0x190 [ 53.451350] really_probe+0x17f/0x5b0 [ 53.451365] driver_probe_device+0x13a/0x1c0 [ 53.451376] device_driver_attach+0x82/0x90 [ 53.451386] ? device_driver_attach+0x90/0x90 [ 53.451391] __driver_attach+0xab/0x190 [ 53.451401] ? device_driver_attach+0x90/0x90 [ 53.451407] bus_for_each_dev+0xe4/0x140 [ 53.451414] ? subsys_dev_iter_exit+0x10/0x10 [ 53.451423] ? __list_add_valid+0x2b/0xa0 [ 53.451440] bus_add_driver+0x227/0x2e0 [ 53.451454] driver_register+0xd3/0x150 [ 53.451585] i915_init+0x92/0xac [i915] [ 53.451592] ? 0xffffffffa0a20000 [ 53.451598] do_one_initcall+0xb6/0x3b0 [ 53.451606] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 53.451614] ? __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.451627] ? kmem_cache_alloc_trace+0x4a4/0x8e0 [ 53.451634] ? kasan_unpoison_shadow+0x33/0x40 [ 53.451649] do_init_module+0xf8/0x350 [ 53.451662] load_module+0x43de/0x47f0 [ 53.451716] ? module_frob_arch_sections+0x20/0x20 [ 53.451731] ? rw_verify_area+0x5f/0x130 [ 53.451780] ? __do_sys_finit_module+0x10d/0x1a0 [ 53.451785] __do_sys_finit_module+0x10d/0x1a0 [ 53.451792] ? __ia32_sys_init_module+0x40/0x40 [ 53.451800] ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0 [ 53.451829] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 53.451835] ? mark_held_locks+0x24/0x90 [ 53.451856] do_syscall_64+0x33/0x80 [ 53.451863] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.451868] RIP: 0033:0x7fde09b4470d [ 53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48 [ 53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d [ 53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f [ 53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded [ 53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150 [ 53.451957] Allocated by task 345: [ 53.451995] kasan_save_stack+0x1b/0x40 [ 53.452001] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.452006] kmem_cache_alloc+0x1cd/0x8d0 [ 53.452146] i915_vma_instance+0x126/0xb70 [i915] [ 53.452304] i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915] [ 53.452446] intel_dsb_prepare+0x14f/0x230 [i915] [ 53.452588] intel_atomic_commit+0x183/0x690 [i915] [ 53.452730] intel_initial_commit+0x2bc/0x2f0 [i915] [ 53.452871] intel_modeset_init_nogem+0xa02/0x2af0 [i915] [ 53.452995] i915_driver_probe+0x8af/0x1210 [i915] [ 53.453120] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.453125] pci_device_probe+0xf9/0x190 [ 53.453131] really_probe+0x17f/0x5b0 [ 53.453136] driver_probe_device+0x13a/0x1c0 [ 53.453142] device_driver_attach+0x82/0x90 [ 53.453148] __driver_attach+0xab/0x190 [ 53.453153] bus_for_each_dev+0xe4/0x140 [ 53.453158] bus_add_driver+0x227/0x2e0 [ 53.453164] driver_register+0xd3/0x150 [ 53.453286] i915_init+0x92/0xac [i915] [ 53.453292] do_one_initcall+0xb6/0x3b0 [ 53.453297] do_init_module+0xf8/0x350 [ 53.453302] load_module+0x43de/0x47f0 [ 53.453307] __do_sys_finit_module+0x10d/0x1a0 [ 53.453312] do_syscall_64+0x33/0x80 [ 53.453318] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.453345] Freed by task 82: [ 53.453379] kasan_save_stack+0x1b/0x40 [ 53.453384] kasan_set_track+0x1c/0x30 [ 53.453389] kasan_set_free_info+0x1b/0x30 [ 53.453394] __kasan_slab_free+0x112/0x160 [ 53.453399] kmem_cache_free+0xb2/0x3f0 [ 53.453536] i915_gem_flush_free_objects+0x31a/0x3b0 [i915] [ 53.453542] process_one_work+0x519/0x9f0 [ 53.453547] worker_thread+0x75/0x5c0 [ 53.453552] kthread+0x1da/0x230 [ 53.453557] ret_from_fork+0x22/0x30 [ 53.453584] The buggy address belongs to the object at ffff88811b1e8040 which belongs to the cache i915_vma of size 968 [ 53.453692] The buggy address is located 48 bytes inside of 968-byte region [ffff88811b1e8040, ffff88811b1e8408) [ 53.453792] The buggy address belongs to the page: [ 53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8 [ 53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0 [ 53.453853] flags: 0x8000000000010200(slab|head) [ 53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340 [ 53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000 [ 53.453870] page dumped because: kasan: bad access detected [ 53.453895] Memory state around the buggy address: [ 53.453944] ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454011] ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb [ 53.454146] ^ [ 53.454211] ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454279] ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454347] ================================================================== [ 53.454414] Disabling lock debugging due to kernel taint [ 53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G B W 5.10.0-rc5+ #12 [ 53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915] [ 53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8 [ 53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286 [ 53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f [ 53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160 [ 53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000 [ 53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0 [ 53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160 [ 53.454664] FS: 00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000 [ 53.454672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0 [ 53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.454700] Call Trace: [ 53.454833] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] Reported-by: Matthew Auld <[email protected]> Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer") Signed-off-by: Chris Wilson <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Lucas De Marchi <[email protected]> Tested-by: Matthew Auld <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit b3bf99daaee96a141536ce5c60a0d6dba6ec1d23) Signed-off-by: Rodrigo Vivi <[email protected]>
evadot
pushed a commit
that referenced
this pull request
Mar 29, 2022
Prior to sanitizing the GGTT, the only operations allowed in intel_display_init_nogem() are those to reserve the preallocated (and active) regions in the GGTT leftover from the BIOS. Trying to allocate a GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset) may then conflict with other preallocated regions that have not yet been protected. Move the initial modesetting from the end of init_nogem to the beginning of init so that any vma pinning (either framebuffers or DSB, for example), is after the GGTT is ready to handle it. This will prevent the DSB object from being destroyed too early: [ 53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345 [ 53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G W 5.10.0-rc5+ #12 [ 53.449409] Call Trace: [ 53.449418] dump_stack+0x9a/0xcc [ 53.449558] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449565] print_address_description.constprop.0+0x3e/0x60 [ 53.449577] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 53.449718] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449849] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449857] kasan_report.cold+0x1f/0x37 [ 53.449993] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450130] i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450273] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] [ 53.450281] ? static_obj+0x69/0x80 [ 53.450289] ? lockdep_init_map_waits+0xa9/0x310 [ 53.450431] ? intel_wopcm_init+0x96/0x3d0 [i915] [ 53.450581] ? i915_gem_init+0x75/0x2d0 [i915] [ 53.450720] i915_gem_init+0x75/0x2d0 [i915] [ 53.450852] i915_driver_probe+0x8c2/0x1210 [i915] [ 53.450993] ? i915_pm_prepare+0x630/0x630 [i915] [ 53.451006] ? check_chain_key+0x1e7/0x2e0 [ 53.451025] ? __pm_runtime_resume+0x58/0xb0 [ 53.451157] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.451285] ? i915_pci_remove+0x40/0x40 [i915] [ 53.451295] ? lockdep_hardirqs_on_prepare+0x124/0x230 [ 53.451302] ? _raw_spin_unlock_irqrestore+0x42/0x50 [ 53.451309] ? lockdep_hardirqs_on+0xbf/0x130 [ 53.451315] ? preempt_count_sub+0xf/0xb0 [ 53.451321] ? _raw_spin_unlock_irqrestore+0x2f/0x50 [ 53.451335] pci_device_probe+0xf9/0x190 [ 53.451350] really_probe+0x17f/0x5b0 [ 53.451365] driver_probe_device+0x13a/0x1c0 [ 53.451376] device_driver_attach+0x82/0x90 [ 53.451386] ? device_driver_attach+0x90/0x90 [ 53.451391] __driver_attach+0xab/0x190 [ 53.451401] ? device_driver_attach+0x90/0x90 [ 53.451407] bus_for_each_dev+0xe4/0x140 [ 53.451414] ? subsys_dev_iter_exit+0x10/0x10 [ 53.451423] ? __list_add_valid+0x2b/0xa0 [ 53.451440] bus_add_driver+0x227/0x2e0 [ 53.451454] driver_register+0xd3/0x150 [ 53.451585] i915_init+0x92/0xac [i915] [ 53.451592] ? 0xffffffffa0a20000 [ 53.451598] do_one_initcall+0xb6/0x3b0 [ 53.451606] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 53.451614] ? __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.451627] ? kmem_cache_alloc_trace+0x4a4/0x8e0 [ 53.451634] ? kasan_unpoison_shadow+0x33/0x40 [ 53.451649] do_init_module+0xf8/0x350 [ 53.451662] load_module+0x43de/0x47f0 [ 53.451716] ? module_frob_arch_sections+0x20/0x20 [ 53.451731] ? rw_verify_area+0x5f/0x130 [ 53.451780] ? __do_sys_finit_module+0x10d/0x1a0 [ 53.451785] __do_sys_finit_module+0x10d/0x1a0 [ 53.451792] ? __ia32_sys_init_module+0x40/0x40 [ 53.451800] ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0 [ 53.451829] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 53.451835] ? mark_held_locks+0x24/0x90 [ 53.451856] do_syscall_64+0x33/0x80 [ 53.451863] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.451868] RIP: 0033:0x7fde09b4470d [ 53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48 [ 53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d [ 53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f [ 53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded [ 53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150 [ 53.451957] Allocated by task 345: [ 53.451995] kasan_save_stack+0x1b/0x40 [ 53.452001] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.452006] kmem_cache_alloc+0x1cd/0x8d0 [ 53.452146] i915_vma_instance+0x126/0xb70 [i915] [ 53.452304] i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915] [ 53.452446] intel_dsb_prepare+0x14f/0x230 [i915] [ 53.452588] intel_atomic_commit+0x183/0x690 [i915] [ 53.452730] intel_initial_commit+0x2bc/0x2f0 [i915] [ 53.452871] intel_modeset_init_nogem+0xa02/0x2af0 [i915] [ 53.452995] i915_driver_probe+0x8af/0x1210 [i915] [ 53.453120] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.453125] pci_device_probe+0xf9/0x190 [ 53.453131] really_probe+0x17f/0x5b0 [ 53.453136] driver_probe_device+0x13a/0x1c0 [ 53.453142] device_driver_attach+0x82/0x90 [ 53.453148] __driver_attach+0xab/0x190 [ 53.453153] bus_for_each_dev+0xe4/0x140 [ 53.453158] bus_add_driver+0x227/0x2e0 [ 53.453164] driver_register+0xd3/0x150 [ 53.453286] i915_init+0x92/0xac [i915] [ 53.453292] do_one_initcall+0xb6/0x3b0 [ 53.453297] do_init_module+0xf8/0x350 [ 53.453302] load_module+0x43de/0x47f0 [ 53.453307] __do_sys_finit_module+0x10d/0x1a0 [ 53.453312] do_syscall_64+0x33/0x80 [ 53.453318] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.453345] Freed by task 82: [ 53.453379] kasan_save_stack+0x1b/0x40 [ 53.453384] kasan_set_track+0x1c/0x30 [ 53.453389] kasan_set_free_info+0x1b/0x30 [ 53.453394] __kasan_slab_free+0x112/0x160 [ 53.453399] kmem_cache_free+0xb2/0x3f0 [ 53.453536] i915_gem_flush_free_objects+0x31a/0x3b0 [i915] [ 53.453542] process_one_work+0x519/0x9f0 [ 53.453547] worker_thread+0x75/0x5c0 [ 53.453552] kthread+0x1da/0x230 [ 53.453557] ret_from_fork+0x22/0x30 [ 53.453584] The buggy address belongs to the object at ffff88811b1e8040 which belongs to the cache i915_vma of size 968 [ 53.453692] The buggy address is located 48 bytes inside of 968-byte region [ffff88811b1e8040, ffff88811b1e8408) [ 53.453792] The buggy address belongs to the page: [ 53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8 [ 53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0 [ 53.453853] flags: 0x8000000000010200(slab|head) [ 53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340 [ 53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000 [ 53.453870] page dumped because: kasan: bad access detected [ 53.453895] Memory state around the buggy address: [ 53.453944] ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454011] ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb [ 53.454146] ^ [ 53.454211] ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454279] ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454347] ================================================================== [ 53.454414] Disabling lock debugging due to kernel taint [ 53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G B W 5.10.0-rc5+ #12 [ 53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915] [ 53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8 [ 53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286 [ 53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f [ 53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160 [ 53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000 [ 53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0 [ 53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160 [ 53.454664] FS: 00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000 [ 53.454672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0 [ 53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.454700] Call Trace: [ 53.454833] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] Reported-by: Matthew Auld <[email protected]> Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer") Signed-off-by: Chris Wilson <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Lucas De Marchi <[email protected]> Tested-by: Matthew Auld <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit b3bf99daaee96a141536ce5c60a0d6dba6ec1d23) Signed-off-by: Rodrigo Vivi <[email protected]>
dumbbell
pushed a commit
to dumbbell/drm-kmod
that referenced
this pull request
Jan 14, 2023
When an amdgpu device fails to init, it makes another VGA device cause kernel splat: kernel: amdgpu 0000:08:00.0: amdgpu: amdgpu_device_ip_init failed kernel: amdgpu 0000:08:00.0: amdgpu: Fatal error during GPU init kernel: amdgpu: probe of 0000:08:00.0 failed with error -110 ... kernel: amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none kernel: BUG: kernel NULL pointer dereference, address: 0000000000000018 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0000 [freebsd#1] SMP NOPTI kernel: CPU: 6 PID: 1080 Comm: Xorg Tainted: G W 5.12.0-rc8+ freebsd#12 kernel: Hardware name: HP HP EliteDesk 805 G6/872B, BIOS S09 Ver. 02.02.00 12/30/2020 kernel: RIP: 0010:amdgpu_device_vga_set_decode+0x13/0x30 [amdgpu] kernel: Code: 06 31 c0 c3 b8 ea ff ff ff 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 8b 87 90 06 00 00 48 89 e5 53 89 f3 <48> 8b 40 18 40 0f b6 f6 e8 40 58 39 fd 80 fb 01 5b 5d 19 c0 83 e0 kernel: RSP: 0018:ffffae3c0246bd68 EFLAGS: 00010002 kernel: RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 kernel: RDX: ffff8dd1af5a8560 RSI: 0000000000000000 RDI: ffff8dce8c160000 kernel: RBP: ffffae3c0246bd70 R08: ffff8dd1af5985c0 R09: ffffae3c0246ba38 kernel: R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000246 kernel: R13: 0000000000000000 R14: 0000000000000003 R15: ffff8dce81490000 kernel: FS: 00007f9303d8fa40(0000) GS:ffff8dd1af580000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000018 CR3: 0000000103cfa000 CR4: 0000000000350ee0 kernel: Call Trace: kernel: vga_arbiter_notify_clients.part.0+0x4a/0x80 kernel: vga_get+0x17f/0x1c0 kernel: vga_arb_write+0x121/0x6a0 kernel: ? apparmor_file_permission+0x1c/0x20 kernel: ? security_file_permission+0x30/0x180 kernel: vfs_write+0xca/0x280 kernel: ksys_write+0x67/0xe0 kernel: __x64_sys_write+0x1a/0x20 kernel: do_syscall_64+0x38/0x90 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f93041e02f7 kernel: Code: 75 05 48 83 c4 58 c3 e8 f7 33 ff ff 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 kernel: RSP: 002b:00007fff60e49b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 kernel: RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f93041e02f7 kernel: RDX: 000000000000000b RSI: 00007fff60e49b40 RDI: 000000000000000f kernel: RBP: 00007fff60e49b40 R08: 00000000ffffffff R09: 00007fff60e499d0 kernel: R10: 00007f93049350b5 R11: 0000000000000246 R12: 000056111d45e808 kernel: R13: 0000000000000000 R14: 000056111d45e7f8 R15: 000056111d46c980 kernel: Modules linked in: nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_seq input_leds snd_seq_device snd_timer snd soundcore joydev kvm_amd serio_raw k10temp mac_hid hp_wmi ccp kvm sparse_keymap wmi_bmof ucsi_acpi efi_pstore typec_ucsi rapl typec video wmi sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid amdgpu drm_ttm_helper ttm iommu_v2 gpu_sched i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crct10dif_pclmul sysimgblt crc32_pclmul fb_sys_fops ghash_clmulni_intel cec rc_core aesni_intel crypto_simd psmouse cryptd r8169 i2c_piix4 drm ahci xhci_pci realtek libahci xhci_pci_renesas gpio_amdpt gpio_generic kernel: CR2: 0000000000000018 kernel: ---[ end trace 76d04313d4214c51 ]--- Commit 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") makes amdgpu_driver_unload_kms() skips amdgpu_device_fini(), so the VGA clients remain registered. So when vga_arbiter_notify_clients() iterates over registered clients, it causes NULL pointer dereference. Since there's no reason to register VGA clients that early, so solve the issue by putting them after all the goto cleanups. v2: - Remove redundant vga_switcheroo cleanup in failed: label. Fixes: 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
dumbbell
pushed a commit
to dumbbell/drm-kmod
that referenced
this pull request
Jan 16, 2023
When an amdgpu device fails to init, it makes another VGA device cause kernel splat: kernel: amdgpu 0000:08:00.0: amdgpu: amdgpu_device_ip_init failed kernel: amdgpu 0000:08:00.0: amdgpu: Fatal error during GPU init kernel: amdgpu: probe of 0000:08:00.0 failed with error -110 ... kernel: amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none kernel: BUG: kernel NULL pointer dereference, address: 0000000000000018 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0000 [freebsd#1] SMP NOPTI kernel: CPU: 6 PID: 1080 Comm: Xorg Tainted: G W 5.12.0-rc8+ freebsd#12 kernel: Hardware name: HP HP EliteDesk 805 G6/872B, BIOS S09 Ver. 02.02.00 12/30/2020 kernel: RIP: 0010:amdgpu_device_vga_set_decode+0x13/0x30 [amdgpu] kernel: Code: 06 31 c0 c3 b8 ea ff ff ff 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 8b 87 90 06 00 00 48 89 e5 53 89 f3 <48> 8b 40 18 40 0f b6 f6 e8 40 58 39 fd 80 fb 01 5b 5d 19 c0 83 e0 kernel: RSP: 0018:ffffae3c0246bd68 EFLAGS: 00010002 kernel: RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 kernel: RDX: ffff8dd1af5a8560 RSI: 0000000000000000 RDI: ffff8dce8c160000 kernel: RBP: ffffae3c0246bd70 R08: ffff8dd1af5985c0 R09: ffffae3c0246ba38 kernel: R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000246 kernel: R13: 0000000000000000 R14: 0000000000000003 R15: ffff8dce81490000 kernel: FS: 00007f9303d8fa40(0000) GS:ffff8dd1af580000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000018 CR3: 0000000103cfa000 CR4: 0000000000350ee0 kernel: Call Trace: kernel: vga_arbiter_notify_clients.part.0+0x4a/0x80 kernel: vga_get+0x17f/0x1c0 kernel: vga_arb_write+0x121/0x6a0 kernel: ? apparmor_file_permission+0x1c/0x20 kernel: ? security_file_permission+0x30/0x180 kernel: vfs_write+0xca/0x280 kernel: ksys_write+0x67/0xe0 kernel: __x64_sys_write+0x1a/0x20 kernel: do_syscall_64+0x38/0x90 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f93041e02f7 kernel: Code: 75 05 48 83 c4 58 c3 e8 f7 33 ff ff 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 kernel: RSP: 002b:00007fff60e49b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 kernel: RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f93041e02f7 kernel: RDX: 000000000000000b RSI: 00007fff60e49b40 RDI: 000000000000000f kernel: RBP: 00007fff60e49b40 R08: 00000000ffffffff R09: 00007fff60e499d0 kernel: R10: 00007f93049350b5 R11: 0000000000000246 R12: 000056111d45e808 kernel: R13: 0000000000000000 R14: 000056111d45e7f8 R15: 000056111d46c980 kernel: Modules linked in: nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_seq input_leds snd_seq_device snd_timer snd soundcore joydev kvm_amd serio_raw k10temp mac_hid hp_wmi ccp kvm sparse_keymap wmi_bmof ucsi_acpi efi_pstore typec_ucsi rapl typec video wmi sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid amdgpu drm_ttm_helper ttm iommu_v2 gpu_sched i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crct10dif_pclmul sysimgblt crc32_pclmul fb_sys_fops ghash_clmulni_intel cec rc_core aesni_intel crypto_simd psmouse cryptd r8169 i2c_piix4 drm ahci xhci_pci realtek libahci xhci_pci_renesas gpio_amdpt gpio_generic kernel: CR2: 0000000000000018 kernel: ---[ end trace 76d04313d4214c51 ]--- Commit 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") makes amdgpu_driver_unload_kms() skips amdgpu_device_fini(), so the VGA clients remain registered. So when vga_arbiter_notify_clients() iterates over registered clients, it causes NULL pointer dereference. Since there's no reason to register VGA clients that early, so solve the issue by putting them after all the goto cleanups. v2: - Remove redundant vga_switcheroo cleanup in failed: label. Fixes: 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
dumbbell
pushed a commit
to dumbbell/drm-kmod
that referenced
this pull request
Jan 27, 2023
When an amdgpu device fails to init, it makes another VGA device cause kernel splat: kernel: amdgpu 0000:08:00.0: amdgpu: amdgpu_device_ip_init failed kernel: amdgpu 0000:08:00.0: amdgpu: Fatal error during GPU init kernel: amdgpu: probe of 0000:08:00.0 failed with error -110 ... kernel: amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none kernel: BUG: kernel NULL pointer dereference, address: 0000000000000018 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0000 [freebsd#1] SMP NOPTI kernel: CPU: 6 PID: 1080 Comm: Xorg Tainted: G W 5.12.0-rc8+ freebsd#12 kernel: Hardware name: HP HP EliteDesk 805 G6/872B, BIOS S09 Ver. 02.02.00 12/30/2020 kernel: RIP: 0010:amdgpu_device_vga_set_decode+0x13/0x30 [amdgpu] kernel: Code: 06 31 c0 c3 b8 ea ff ff ff 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 8b 87 90 06 00 00 48 89 e5 53 89 f3 <48> 8b 40 18 40 0f b6 f6 e8 40 58 39 fd 80 fb 01 5b 5d 19 c0 83 e0 kernel: RSP: 0018:ffffae3c0246bd68 EFLAGS: 00010002 kernel: RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 kernel: RDX: ffff8dd1af5a8560 RSI: 0000000000000000 RDI: ffff8dce8c160000 kernel: RBP: ffffae3c0246bd70 R08: ffff8dd1af5985c0 R09: ffffae3c0246ba38 kernel: R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000246 kernel: R13: 0000000000000000 R14: 0000000000000003 R15: ffff8dce81490000 kernel: FS: 00007f9303d8fa40(0000) GS:ffff8dd1af580000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000018 CR3: 0000000103cfa000 CR4: 0000000000350ee0 kernel: Call Trace: kernel: vga_arbiter_notify_clients.part.0+0x4a/0x80 kernel: vga_get+0x17f/0x1c0 kernel: vga_arb_write+0x121/0x6a0 kernel: ? apparmor_file_permission+0x1c/0x20 kernel: ? security_file_permission+0x30/0x180 kernel: vfs_write+0xca/0x280 kernel: ksys_write+0x67/0xe0 kernel: __x64_sys_write+0x1a/0x20 kernel: do_syscall_64+0x38/0x90 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f93041e02f7 kernel: Code: 75 05 48 83 c4 58 c3 e8 f7 33 ff ff 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 kernel: RSP: 002b:00007fff60e49b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 kernel: RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f93041e02f7 kernel: RDX: 000000000000000b RSI: 00007fff60e49b40 RDI: 000000000000000f kernel: RBP: 00007fff60e49b40 R08: 00000000ffffffff R09: 00007fff60e499d0 kernel: R10: 00007f93049350b5 R11: 0000000000000246 R12: 000056111d45e808 kernel: R13: 0000000000000000 R14: 000056111d45e7f8 R15: 000056111d46c980 kernel: Modules linked in: nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_seq input_leds snd_seq_device snd_timer snd soundcore joydev kvm_amd serio_raw k10temp mac_hid hp_wmi ccp kvm sparse_keymap wmi_bmof ucsi_acpi efi_pstore typec_ucsi rapl typec video wmi sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid amdgpu drm_ttm_helper ttm iommu_v2 gpu_sched i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crct10dif_pclmul sysimgblt crc32_pclmul fb_sys_fops ghash_clmulni_intel cec rc_core aesni_intel crypto_simd psmouse cryptd r8169 i2c_piix4 drm ahci xhci_pci realtek libahci xhci_pci_renesas gpio_amdpt gpio_generic kernel: CR2: 0000000000000018 kernel: ---[ end trace 76d04313d4214c51 ]--- Commit 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") makes amdgpu_driver_unload_kms() skips amdgpu_device_fini(), so the VGA clients remain registered. So when vga_arbiter_notify_clients() iterates over registered clients, it causes NULL pointer dereference. Since there's no reason to register VGA clients that early, so solve the issue by putting them after all the goto cleanups. v2: - Remove redundant vga_switcheroo cleanup in failed: label. Fixes: 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
lutzbichler
pushed a commit
to lutzbichler/drm-kmod
that referenced
this pull request
Apr 16, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
evadot
pushed a commit
that referenced
this pull request
Jun 27, 2023
…date_bw [ Upstream commit 50e6cb3fd2cde554db646282ea10df7236e6493c ] [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
wulf7
pushed a commit
to wulf7/drm-kmod
that referenced
this pull request
Nov 6, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
wulf7
pushed a commit
to wulf7/drm-kmod
that referenced
this pull request
Nov 7, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
wulf7
pushed a commit
to wulf7/drm-kmod
that referenced
this pull request
Nov 7, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
wulf7
pushed a commit
to wulf7/drm-kmod
that referenced
this pull request
Nov 12, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
wulf7
pushed a commit
to wulf7/drm-kmod
that referenced
this pull request
Nov 28, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
lutzbichler
pushed a commit
to lutzbichler/drm-kmod
that referenced
this pull request
Dec 7, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
dumbbell
pushed a commit
to dumbbell/drm-kmod
that referenced
this pull request
Dec 9, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
dumbbell
pushed a commit
to dumbbell/drm-kmod
that referenced
this pull request
Dec 12, 2023
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [freebsd#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 freebsd#12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
These are the changes that are needed to get the drm driver working with a Navi10 card on FreeBSD. They consist of
kernel_fpu_begin/endpairs.I would say the first change probably needs consideration. I did not spend time to find out how much the mdelay should increase. The only error the
psp_wait_for()function can return is that it timed out. So, I just started with a large number and didn't look at reducing it. It might be better to get the the pull request in and the card working before looking at reducing this time afterwards.Anyway, with these changes and the mesa_devel package, X11 works. Haven't tried Wayland.