event LEDs mode, pragma once, PID knob_led interaction, preheatdone sound, small fixes and cleanup

.github/pull_request_template.md

@@ -1,3 +1,6 @@
+### Please read the styleguide before posting!
+ ----> See styleguide.md in the root of this project
+
 ### Requirements
 
 * Filling out this template is required. Pull Requests without a clear description may be closed at the maintainers' discretion.

Copy to SD Card root directory to update - Unified Menu Material theme/Language Packs/language_am.ini

@@ -0,0 +1,284 @@
+#### Language Code:AM
+## Language Version:20201115
+## Maximum byte per keyword is 250 Bytes.
+## Escape characters are not supported except newline '\n'
+
+label_language:Հայերեն
+label_heat:Ջերմություն
+label_move:Շարժել
+label_home:Սկզբնական
+label_disable_steppers:Disarm All
+label_print:Տպել
+label_extrude:Հալել
+label_fan:Հովացնել
+label_settings:Կարգավորումներ
+label_screen_settings:Screen
+label_machine_settings:Machine
+label_feature_settings:Feature
+label_sound:Sound
+label_touch_sound:Touch sounds
+label_toast_sound:Toast Notifications
+label_alert_sound:Popups and Alerts
+label_preheatdone_sound:Preheat done notification
+label_shut_down:Shut Down
+label_rgb_settings:LED Color
+label_rgb_off:LED Off
+label_terminal:Terminal
+label_custom:Custom
+label_leveling:Leveling
+label_point_1:Point 1
+label_point_2:Point 2
+label_point_3:Point 3
+label_point_4:Point 4
+label_point_5:Point 5
+label_bed_leveling:Bed Level
+label_bl_complete:Bed Leveling Complete
+label_bl_smart_fill:Missing probe points\nhave been smart filled.\n \nNote: remember to save!
+label_bl_enable:BL: on
+label_bl_disable:BL: off
+label_abl:ABL
+label_bbl:BBL
+label_ubl:UBL
+label_mbl:MBL
+label_mbl_settings:Mesh Bed Leveling
+label_abl_settings:Auto Bed Leveling
+label_abl_settings_bbl:Bilinear Bed Leveling
+label_abl_settings_ubl:Unified Bed Leveling
+label_abl_settings_ubl_save:Save to slot
+label_abl_settings_ubl_load:Load from slot
+label_abl_slot0:Slot 0
+label_abl_slot1:Slot 1
+label_abl_slot2:Slot 2
+label_abl_slot3:Slot 3
+label_abl_slot_eeprom:Remember slot for next\nreboot? (Save EEPROM)
+label_abl_z:Z Fade
+label_bltouch:BLTouch
+label_bltouch_test:Test
+label_bltouch_deploy:Deploy
+label_bltouch_stow:Stow
+label_bltouch_repeat:Repeat
+label_z_offset:Z Offset
+label_probe_offset:Probe Offset
+label_home_offset:Home Offset
+label_confirmation:Are you sure?
+label_down:Down
+label_up:Up
+label_save:Save
+label_restore:Restore
+label_reset:Reset
+label_default:Default
+label_clear:Clear
+label_next:Next
+label_distance:Distance
+label_invalid_value:Invalid value(s)
+label_timeout_reached:Timeout reached!
+label_process_running:Process already running!
+label_process_completed:Process completed!
+label_process_aborted:Process aborted!
+label_inc:Ավելացնել
+label_dec:Նվազեցնել
+label_nozzle:Գլխիկ
+label_bed:Տախտակ
+label_chamber:Chamber
+label_start:Start
+label_stop:Դադարեցնել
+label_back:Հետ
+label_page_up:Վերեւ
+label_page_down:Ներքեւ
+label_pause:Կանգնեցնել
+label_resume:Շարունակել
+label_load:Load
+label_unload:Unload
+label_slow_speed:Դանդաղ
+label_normal_speed:Նորմալ
+label_fast_speed:Արագ
+label_fan_full_speed:Ամբողջը
+label_fan_half_speed:Կիսատ
+label_rotate_ui:Rotate UI
+label_touchscreen_adjust:TSC Adjust
+label_more:More
+label_screen_info:Info
+label_status:Status
+label_simulator_bg_color:Marlin simulator background color
+label_simulator_font_color:Marlin simulator font color
+label_white:White
+label_black:Black
+label_blue:Blue
+label_red:Red
+label_green:Green
+label_cyan:Cyan
+label_yellow:Yellow
+label_brown:Brown
+label_gray:Gray
+label_orange:Orange
+label_indigo:Indigo
+label_violet:Violet
+label_magenta:Magenta
+label_purple:Purple
+label_lime:Lime
+label_darkblue:DarkBlue
+label_darkgreen:DarkGreen
+label_darkgray:DarkGray
+label_disconnect:Անջատել
+label_baudrate:BaudRate
+label_percentage:Percentage
+label_babystep:Դանդաղ
+label_percentage_speed:Արագություն
+label_percentage_flow:Flow
+label_value_zero:Zero
+label_1_degree:1℃
+label_5_degree:5℃
+label_10_degree:10℃
+label_x_inc:X+
+label_y_inc:Y+
+label_z_inc:Z+
+label_x_dec:X-
+label_y_dec:Y-
+label_z_dec:Z-
+label_x:X
+label_y:Y
+label_z:Z
+label_001_mm:0.01mm
+label_01_mm:0.1mm
+label_1_mm:1mm
+label_5_mm:5mm
+label_10_mm:10mm
+label_100_mm:100mm
+label_200_mm:200mm
+label_1_percent:1%
+label_5_percent:5%
+label_10_percent:10%
+label_percent_value:%d%%
+label_ready:Պատրաստ
+label_busy:Ծանրաբեռնված է
+label_unconnected:Տպիչը կցված չէ
+label_disconnect_info:Now you can control the printer by your computer!
+label_loading:Բեռնում է...
+label_power_failed:Տպելը չի ավարտվել, շարունակե՞լ
+label_continue:Շարունակել
+label_cancel:Չեղարկել
+label_adjust_title:Էկրանի կարգավորում
+label_adjust_info:Please click on the red dot
+label_adjust_ok:Adjustment Success
+label_adjust_failed:Adjustment failed, Please Try Again
+label_warning:Warning
+label_stop_print:Stop printing?
+label_confirm:Confirm
+label_tftsd:TFT SD
+label_read_tftsd_error:TFTSD հիշողության սարքը չկա
+label_tftsd_inserted:Card inserted!
+label_tftsd_removed:Card removed!
+label_u_disk:U Disk
+label_read_u_disk_error:Read U Disk error!
+label_u_disk_inserted:U Disk inserted!
+label_u_disk_removed:U Disk removed!
+label_onboardsd:OnboardSD
+label_read_onboardsd_error:OnboardSD հիշողության սարքը չկա
+label_filament_sensor:Filament sensor
+label_filament_runout:Filament runout!
+label_preheat:Preheat
+label_preheat_both:Both
+label_is_pause:Unable to extrude when\nprinting.\nPause printing?
+label_auto_shut_down:Auto Power
+label_unifiedmove:Movement
+label_unifiedheat:Heat&Fan
+label_cooldown:Cool Down
+label_emergencystop:EM. STOP
+label_touch_to_exit:Touch anywhere to exit
+label_mainmenu:Menu
+label_wait_temp_shut_down:Wait for the temperature\nof hotend to be\nlower than %d℃
+label_force_shut_down:Force
+label_shutting_down:Shutting down...
+label_parameter_setting:Պարամետր
+label_on:ON
+label_off:OFF
+label_smart:SMART
+label_terminal_ack:Show ACK in Terminal
+label_invert_xaxis:Invert X Axis
+label_invert_yaxis:Invert Y Axis
+label_invert_zaxis:Invert Z Axis
+label_move_speed:Move speed(X Y Z)
+label_knob_led:Rotary Knob LED
+label_knob_led_idle:Rotary Knob LED idle
+label_m0_pause:Paused by M0 command
+label_send_start_gcode:Start Gcode before print
+label_send_end_gcode:End Gcode after print
+label_send_cancel_gcode:Cancel Gcode
+label_persistent_status_info:Persistent Status Info
+label_file_listmode:Files viewer List Mode
+label_current_setting:Driver Current (mA)
+label_steps_setting:Steps per mm
+label_maxfeedrate:Max Feed Rate
+label_maxacceleration:Max Acceleration
+label_acceleration:Acceleration
+label_print_acceleration:Print Acceleration
+label_retract_acceleration:Retract Acceleration
+label_travel_acceleration:Travel Acceleration
+label_jerk:Jerk
+label_junction_deviation:Junction Deviation
+label_bump_sensitivity:TMC bump sensitivity
+label_fwretract:FW Retraction
+label_fwrecover:FW Retraction Recover
+label_lin_advance:Linear Advance
+label_reset_settings_info:Reset all settings to\ndefault values?
+label_reset_settings_done:Reset all settings\nsuccessful.\nplease restart the device.
+label_info:Info
+label_lcd_brightness:LCD Brightness
+label_lcd_brightness_dim:LCD Brightness dim
+label_lcd_dim_idle_timer:LCD dim idle timer
+label_5_seconds:5 Sec.
+label_10_seconds:10 Sec.
+label_30_seconds:30 Sec.
+label_60_seconds:1 Min.
+label_120_seconds:2 Min.
+label_300_seconds:5 Min.
+label_custom_seconds:Custom
+label_event_led_mode:Event led mode
+label_st7920_fullscreen:Marlin mode in fullscreen
+label_plr_en:Power loss recovery
+label_setting_save:Save settings
+label_setting_reset:Reset default settings
+label_setting_restore:load settings
+label_eeprom_settings:EEPROM
+label_eeprom_save_info:Save printer settings\nto EEPROM?
+label_eeprom_restore_info:Reload settings from\nEEPROM?
+label_eeprom_reset_info:Reset EEPROM to stock printer settings?
+label_retract_feedrate:Retract feedrate
+label_retract_length:Retract length
+label_retract_swap_length:Retract swap length
+label_retract_z_lift:Z lift on retraction
+label_retract_auto:Auto Firmware Retract
+label_recover_feedrate:Recover feedrate
+label_swap_recover_feedrate:Swap recover feedrate
+label_recover_length:Extra recover length
+label_swap_recover_length:Extra recover swap length
+label_start_print:Start Printing:\n %s?
+label_ack_notification:ACK notification style
+label_leveling_edge_distance:Bed edge distance
+label_xy_unlock:Disarm XY
+label_tuning:Tuning
+label_pid:PID
+label_pid_title:PID autotune
+label_pid_start_info:PID autotune may take\nsome time to complete.\nContinue?
+label_pid_start_info_2:PID autotune in progress!
+label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
+label_tune_extruder:Tune steps
+label_tune_ext_extrude_100:Ext. 100mm
+label_tune_ext_temp:Extruder tuning | Heat
+label_tune_ext_templow:Desired temperature too low!\nMinimum temperature: %d C
+label_tune_ext_desiredval:Temperature is not yet at the desired value
+label_tune_ext_mark120mm:Mark 120 mm on your fillament\nPress '%s' when ready\nMeasure remaining length\nafter extruding
+label_tune_ext_heatoff:Turn the heater off?
+label_tune_ext_adj_esteps:Adjust E-Steps
+label_tune_ext_esteps_saved:New E-steps saved!\nDon't forget to\nsave it in EEPROM\nNew value: %0.2f
+label_tune_ext_measured:Length remaining:
+label_tune_ext_old_estep:Old e-steps: %0.2f
+label_tune_ext_new_estep:New e-steps: %0.2f
+label_connection_settings:Connection
+label_offset_tool:Offset 2nd Nozzle
+label_hybrid_threshold:TMC HybridThreshold
+label_notifications:Notifications
+label_mesh_editor:Mesh edit
+label_mesh_tuner:Mesh tuner
+label_case_light:Case light
+