[PR #104/feb89c9e backport][stable-1] Set export on Config to verbose

[patchback]

This is a backport of PR #104 as merged into main (feb89c9).

SUMMARY

In the configuration export session i think that using /export verbose is better than just /export, because with export only some configurations sections are going to be missed like BGP configuration, as proposed in ansible/ansible#67868

ISSUE TYPE

Minor Change Request
COMPONENT NAME
routeros_facts.py

ADDITIONAL INFORMATION

extract of the output with /export verbose

# software id = 
#
#
#
/interface ethernet
set [ find default-name=ether1 ] advertise=\
    10M-half,10M-full,100M-half,100M-full,1000M-full arp=enabled arp-timeout=\
    auto auto-negotiation=yes cable-settings=default disable-running-check=\
    yes disabled=no full-duplex=yes loop-protect=default \
    loop-protect-disable-time=5m loop-protect-send-interval=5s mac-address=\
    50:00:00:02:00:00 mtu=1500 name=ether1 orig-mac-address=50:00:00:02:00:00 \
    rx-flow-control=off speed=1Gbps tx-flow-control=off
set [ find default-name=ether2 ] advertise=\
    10M-half,10M-full,100M-half,100M-full,1000M-full arp=enabled arp-timeout=\
    auto auto-negotiation=yes cable-settings=default disable-running-check=\
    yes disabled=no full-duplex=yes loop-protect=default \
    loop-protect-disable-time=5m loop-protect-send-interval=5s mac-address=\
    50:00:00:02:00:01 mtu=1500 name=ether2 orig-mac-address=50:00:00:02:00:01 \
    rx-flow-control=off speed=1Gbps tx-flow-control=off
set [ find default-name=ether3 ] advertise=\ 
.....
.....

Extract of Output with only /export:

# software id = 
#
#
#
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
<END>