feat: Support also 1d-measurements in GX2F #2440
Merged
ci-bridge / CI Bridge / linux_physmon
succeeded
Sep 19, 2023 in 25m 44s
GitLab CI: SUCCESS
This check triggered job acts/ci-bridge/32574580
in pipeline acts/ci-bridge/11436
Status: SUCCESS
Created at: 2023-09-19T22:00:16.697+02:00
Started at: 2023-09-19T23:07:13.632+02:00
Finished at: 2023-09-19T23:32:57.304+02:00
Details
Showing last 1226 out of 14936 total lines
✅ Chi2Test 1.0 > 0.01
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/29 bins, cf. 5.385164807134504
✅ ResidualCheck pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 19939.0+-141.20552397126679 vs.
19937.0+-141.19844191774922: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────────── res_d0_vs_eta (TH2F) ─────────────────────────────
✅ Chi2Test pX 1.0 > 0.01
✅ Chi2Test pY 1.0 > 0.01
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pX
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/29 bins, cf. 5.385164807134504
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19939.0+-141.20552397126679 vs.
19937.0+-141.19844191774922: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────────── res_d0_vs_pT (TH2F) ──────────────────────────────
✅ Chi2Test pX 0.9999992919616598 > 0.01
✅ Chi2Test pY 1.0 > 0.01
✅ KolmogorovTest pX 1.0 > 0.68
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/29 bins, cf. 5.385164807134504
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19939.0+-141.20552397126679 vs.
19937.0+-141.19844191774922: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
──────────────────────────────── res_phi (TH1F) ────────────────────────────────
✅ Chi2Test 1.0 > 0.01
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/38 bins, cf. 6.164414002968976
✅ ResidualCheck pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
──────────────────────────── res_phi_vs_eta (TH2F) ─────────────────────────────
✅ Chi2Test pX 1.0 > 0.01
✅ Chi2Test pY 1.0 > 0.01
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pX
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/38 bins, cf. 6.164414002968976
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────────── res_phi_vs_pT (TH2F) ─────────────────────────────
✅ Chi2Test pX 0.9999992919616598 > 0.01
✅ Chi2Test pY 1.0 > 0.01
✅ KolmogorovTest pX 1.0 > 0.68
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/38 bins, cf. 6.164414002968976
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
──────────────────────────────── res_qop (TH1F) ────────────────────────────────
✅ Chi2Test 1.0 > 0.01
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/43 bins, cf. 6.557438524302
✅ ResidualCheck pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
──────────────────────────── res_qop_vs_eta (TH2F) ─────────────────────────────
✅ Chi2Test pX 1.0 > 0.01
✅ Chi2Test pY 1.0 > 0.01
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pX
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/43 bins, cf. 6.557438524302
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────────── res_qop_vs_pT (TH2F) ─────────────────────────────
✅ Chi2Test pX 0.9999992919616598 > 0.01
✅ Chi2Test pY 1.0 > 0.01
✅ KolmogorovTest pX 1.0 > 0.68
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/43 bins, cf. 6.557438524302
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────────────── res_t (TH1F) ─────────────────────────────────
✅ Chi2Test 0.9999999999999613 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/7 bins, cf. 2.6457513110645907
✅ ResidualCheck pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────────── res_t_vs_eta (TH2F) ──────────────────────────────
✅ Chi2Test pX 1.0 > 0.01
✅ Chi2Test pY 0.9999999999999613 > 0.01
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pX
✅ KolmogorovTest pY 1.0 > 0.68
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/7 bins, cf. 2.6457513110645907
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
────────────────────────────── res_t_vs_pT (TH2F) ──────────────────────────────
✅ Chi2Test pX 0.9999992919616598 > 0.01
✅ Chi2Test pY 0.9999999999999613 > 0.01
✅ KolmogorovTest pX 1.0 > 0.68
✅ KolmogorovTest pY 1.0 > 0.68
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/7 bins, cf. 2.6457513110645907
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
─────────────────────────────── res_theta (TH1F) ───────────────────────────────
✅ Chi2Test 1.0 > 0.01
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/60 bins, cf. 7.745966692414834
✅ ResidualCheck pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 19938.0+-141.20198298890847 vs.
19936.0+-141.19490075778234: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
─────────────────────────── res_theta_vs_eta (TH2F) ────────────────────────────
✅ Chi2Test pX 1.0 > 0.01
✅ Chi2Test pY 1.0 > 0.01
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pX
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/60 bins, cf. 7.745966692414834
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19938.0+-141.20198298890847 vs.
19936.0+-141.19490075778234: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
──────────────────────────── res_theta_vs_pT (TH2F) ────────────────────────────
✅ Chi2Test pX 0.9999992919616598 > 0.01
✅ Chi2Test pY 1.0 > 0.01
✅ KolmogorovTest pX 1.0 > 0.68
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/60 bins, cf. 7.745966692414834
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19938.0+-141.20198298890847 vs.
19936.0+-141.19490075778234: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
──────────────────────────────── res_z0 (TH1F) ─────────────────────────────────
✅ Chi2Test 1.0 > 0.01
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/94 bins, cf. 9.695359714832659
✅ ResidualCheck pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 19897.0+-141.05672617780408 vs.
19895.0+-141.0496366532009: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────────── res_z0_vs_eta (TH2F) ─────────────────────────────
✅ Chi2Test pX 1.0 > 0.01
✅ Chi2Test pY 1.0 > 0.01
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pX
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/94 bins, cf. 9.695359714832659
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19897.0+-141.05672617780408 vs.
19895.0+-141.0496366532009: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────────── res_z0_vs_pT (TH2F) ──────────────────────────────
✅ Chi2Test pX 0.9999992919616598 > 0.01
✅ Chi2Test pY 1.0 > 0.01
✅ KolmogorovTest pX 1.0 > 0.68
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest pY
✅ RatioCheck pX (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ RatioCheck pY (a/b - 1) / sigma(a/b) > 3 for 0/94 bins, cf. 9.695359714832659
✅ ResidualCheck pX pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ ResidualCheck pY pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest pX Intregal: 19940.0+-141.20906486483082 vs.
19938.0+-141.20198298890847: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
✅ IntegralTest pY Intregal: 19897.0+-141.05672617780408 vs.
19895.0+-141.0496366532009: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
─────────────────────────── resmean_d0_vs_eta (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -0.014960544518544339+-0.006485877375008567 vs.
-0.014957980121835135+-0.0064859137602338406: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 4
─────────────────────────── resmean_d0_vs_pT (TH1F) ────────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -0.0031267147278413177+-0.0006547733768475651 vs.
-0.003125438350252807+-0.0006548053918140374: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
────────────────────────── resmean_phi_vs_eta (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -0.00019125511263951012+-0.00018250068140618396 vs.
-0.00019111141906336115+-0.00018250111087758132: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
─────────────────────────── resmean_phi_vs_pT (TH1F) ───────────────────────────
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -1.3634216657010256e-05+-1.4659866481204378e-05 vs.
-1.360501516955992e-05+-1.4660542975279564e-05: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
────────────────────────── resmean_qop_vs_eta (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -0.0016543684870384823+-0.0004397739475768486 vs.
-0.0016533122912960607+-0.0004397794582748838: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
─────────────────────────── resmean_qop_vs_pT (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -0.0004879251919192029+-7.657993936045399e-05 vs.
-0.0004876785878877854+-7.658263818787668e-05: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
─────────────────────────── resmean_t_vs_eta (TH1F) ────────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -4.140369907443528+-2.6790279915128474 vs.
-4.1511667822051095+-2.6790548728950587: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
──────────────────────────── resmean_t_vs_pT (TH1F) ────────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -0.4501464515924454+-0.38463814278471464 vs.
-0.453210785984993+-0.38465377110719723: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.01 < 3
───────────────────────── resmean_theta_vs_eta (TH1F) ──────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.00042198004769034014+-0.0002479047353158447 vs.
0.0004219676800403249+-0.0002479050964438476: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
────────────────────────── resmean_theta_vs_pT (TH1F) ──────────────────────────
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 7.93207391325268e-07+-1.0818899731188384e-05 vs.
7.914209163573105e-07+-1.0819441517030551e-05: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
─────────────────────────── resmean_z0_vs_eta (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: -0.061577636897709453+-0.035687191858816886 vs.
-0.0615977084125916+-0.0356871902158865: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────── resmean_z0_vs_pT (TH1F) ────────────────────────────
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.0005121232970850542+-0.0006733253892581729 vs.
0.0005050515319453552+-0.0006733258643285435: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.01 < 3
────────────────────────── reswidth_d0_vs_eta (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.5094144474714994+-0.0057117619724004216 vs.
0.5094269085675478+-0.005711762353754521: (int_a - int_b) / sqrt(sigma(int_a)^2
+ sigma(int_b)^2) = 0.00 < 4
─────────────────────────── reswidth_d0_vs_pT (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.08739513251930475+-0.0004976241971875338 vs.
0.08739882428199053+-0.0004976192578748204: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.01 < 3
────────────────────────── reswidth_phi_vs_eta (TH1F) ──────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.011841283849207684+-0.00016732565428999438 vs.
0.011841485975310206+-0.00016732605746296237: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
────────────────────────── reswidth_phi_vs_pT (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.0018743406399153173+-1.2380539104880998e-05 vs.
0.0018744124681688845+-1.2380777410462468e-05: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
────────────────────────── reswidth_qop_vs_eta (TH1F) ──────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.04174697771668434+-0.00046471873577395135 vs.
0.041748495190404356+-0.00046473049262926096: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
────────────────────────── reswidth_qop_vs_pT (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.009308657725341618+-7.544165316924865e-05 vs.
0.009309037239290774+-7.5442061097982e-05: (int_a - int_b) / sqrt(sigma(int_a)^2
+ sigma(int_b)^2) = 0.00 < 3
─────────────────────────── reswidth_t_vs_eta (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
✅ Chi2Test 1.0 > 0.01
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 260.21321392059326+-2.0560609918499844 vs.
260.2154121398926+-2.0560855514421466: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────── reswidth_t_vs_pT (TH1F) ────────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
✅ Chi2Test 0.9999999999996865 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 51.25510120391846+-0.28545444022681193 vs.
51.255722999572754+-0.28546751899006984: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
───────────────────────── reswidth_theta_vs_eta (TH1F) ─────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.007348738086875528+-0.0004964067696757059 vs.
0.00734881465905346+-0.0004964070459149169: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
───────────────────────── reswidth_theta_vs_pT (TH1F) ──────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.0014090055919950828+-1.0171474566116311e-05 vs.
0.0014090461627347395+-1.0172469616814647e-05: (int_a - int_b) /
sqrt(sigma(int_a)^2 + sigma(int_b)^2) = 0.00 < 3
────────────────────────── reswidth_z0_vs_eta (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1F::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.856500044465065+-0.06469066486856731 vs.
0.8564825691282749+-0.06469066385878425: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────── reswidth_z0_vs_pT (TH1F) ───────────────────────────
TH1F::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 0.08724300749599934+-0.000633281224768783 vs.
0.0872394535690546+-0.0006333117144885686: (int_a - int_b) / sqrt(sigma(int_a)^2
+ sigma(int_b)^2) = 0.00 < 3
──────────────────────── trackeff_vs_eta (TEfficiency) ─────────────────────────
TH1D::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
variable
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/20 bins, cf. 4.47213595499958
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 20.0+-2.1794757570313275 vs.
19.99897552452594+-2.1794759491814: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
───────────────────────── trackeff_vs_pT (TEfficiency) ─────────────────────────
TH1D::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
✅ KolmogorovTest 1.0 > 0.68
variable
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/4 bins, cf. 2.0
✅ ResidualCheck pull < 3 in 40/40 bins, cf. 6.324555320336759
✅ IntegralTest Intregal: 4.0+-2.9580399248112075 vs.
3.9997076450811284+-2.9580399356888942: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
──────────────────────── trackeff_vs_phi (TEfficiency) ─────────────────────────
TH1D::Chi2TestX:0: RuntimeWarning: Both histograms are not unweighted and option UU has been requested
🟡 Chi2Test
Error in <TH1D::KolmogorovTest>: Histograms are not consistent: they have different bin edges
🟡 KolmogorovTest
variable
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/100 bins, cf. 10.0
✅ ResidualCheck pull < 3 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 99.0+-0.04611557551973867 vs.
98.99117772521038+-0.04677875239098219: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.13 < 3
Comparing... ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100% 0:00:00
╭──────────────────────────────────────────────────────────────────────────────╮
│ ✅ SUCCESS │
│ 97 checked items valid │
╰──────────────────────────────────────────────────────────────────────────────╯
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
variable
Making plots ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100% 0:00:45
::endgroup::
Found HistConfig vx|vy|vz for vx : nbins=100 min=-0.1 max=0.1 label=None
Found HistConfig vx|vy|vz for vy : nbins=100 min=-0.1 max=0.1 label=None
Found HistConfig vx|vy|vz for vz : nbins=100 min=-0.1 max=0.1 label=None
Found HistConfig vz for vz : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig vt for vt : nbins=100 min=-4.0 max=4.0 label=None
Found HistConfig p|pt for px : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for px : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig p|pt for py : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for py : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig p|pt for pz : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for pz : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig m for m : nbins=100 min=0.0 max=0.15 label=None
Found HistConfig q for q : nbins=100 min=-2.0 max=2.0 label=None
Found HistConfig eta for eta : nbins=100 min=-3.0 max=3.0 label=None
Found HistConfig p|pt for phi : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig phi for phi : nbins=100 min=-4.0 max=4.0 label=None
Found HistConfig p|pt for pt : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig p|pt for p : nbins=100 min=0.0 max=200.0 label=None
::group::Comparing physmon/particles_initial_fatras_hist.root vs. CI/physmon/reference/particles_initial_fatras_hist.root
╭────────────────────────────── Comparing files: ──────────────────────────────╮
│ Monitored: physmon/particles_initial_fatras_hist.root │
│ Reference: CI/physmon/reference/particles_initial_fatras_hist.root │
╰──────────────────────────────────────────────────────────────────────────────╯
╭─────────────────────────────── Configuration ────────────────────────────────╮
│ Config( │
│ checks={ │
│ '*': { │
│ 'Chi2Test': {'threshold': 0.01}, │
│ 'KolmogorovTest': {'threshold': 0.68}, │
│ 'RatioCheck': {'threshold': 3}, │
│ 'ResidualCheck': {'threshold': 1}, │
│ 'IntegralCheck': {'threshold': 3} │
│ } │
│ } │
│ ) │
╰──────────────────────────────────────────────────────────────────────────────╯
────────────────────────────────── eta (TH1D) ──────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/98 bins, cf. 9.899494936611665
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────────────── m (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/3 bins, cf. 1.7320508075688772
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────────────── p (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/100 bins, cf. 10.0
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 2866.0+-53.53503525729669 vs.
2866.0+-53.53503525729669: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── phi (TH1D) ──────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/80 bins, cf. 8.94427190999916
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── pt (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/50 bins, cf. 7.0710678118654755
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── px (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/50 bins, cf. 7.0710678118654755
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── py (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/50 bins, cf. 7.0710678118654755
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── pz (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/98 bins, cf. 9.899494936611665
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 2949.0+-54.30469592954186 vs.
2949.0+-54.30469592954186: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────────────── q (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/2 bins, cf. 1.4142135623730951
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── vt (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/79 bins, cf. 8.888194417315589
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── vx (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/35 bins, cf. 5.916079783099616
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── vy (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/36 bins, cf. 6.0
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── vz (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/77 bins, cf. 8.774964387392123
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
Comparing... ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100% 0:00:00
╭──────────────────────────────────────────────────────────────────────────────╮
│ ✅ SUCCESS │
│ 13 checked items valid │
╰──────────────────────────────────────────────────────────────────────────────╯
Making plots ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100% 0:00:05
::endgroup::
Found HistConfig vx|vy for vx : nbins=100 min=-2000.0 max=2000.0 label=None
Found HistConfig vx|vy for vy : nbins=100 min=-2000.0 max=2000.0 label=None
Found HistConfig vz for vz : nbins=100 min=-5000.0 max=5000.0 label=None
Found HistConfig vt for vt : nbins=100 min=-30.0 max=30.0 label=None
Found HistConfig p|pt for px : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for px : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig p|pt for py : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for py : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig p|pt for pz : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for pz : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig m for m : nbins=100 min=0.0 max=0.15 label=None
Found HistConfig q for q : nbins=100 min=-2.0 max=2.0 label=None
Found HistConfig eta for eta : nbins=100 min=-3.0 max=3.0 label=None
Found HistConfig p|pt for phi : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig phi for phi : nbins=100 min=-4.0 max=4.0 label=None
Found HistConfig p|pt for pt : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig p|pt for p : nbins=100 min=0.0 max=200.0 label=None
::group::Comparing physmon/particles_final_fatras_hist.root vs. CI/physmon/reference/particles_final_fatras_hist.root
╭────────────────────────────── Comparing files: ──────────────────────────────╮
│ Monitored: physmon/particles_final_fatras_hist.root │
│ Reference: CI/physmon/reference/particles_final_fatras_hist.root │
╰──────────────────────────────────────────────────────────────────────────────╯
╭─────────────────────────────── Configuration ────────────────────────────────╮
│ Config( │
│ checks={ │
│ '*': { │
│ 'Chi2Test': {'threshold': 0.01}, │
│ 'KolmogorovTest': {'threshold': 0.68}, │
│ 'RatioCheck': {'threshold': 3}, │
│ 'ResidualCheck': {'threshold': 1}, │
│ 'IntegralCheck': {'threshold': 3} │
│ } │
│ } │
│ ) │
╰──────────────────────────────────────────────────────────────────────────────╯
────────────────────────────────── eta (TH1D) ──────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/97 bins, cf. 9.848857801796104
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────────────── m (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/3 bins, cf. 1.7320508075688772
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────────────── p (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/100 bins, cf. 10.0
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 2896.0+-53.81449618829484 vs.
2896.0+-53.81449618829484: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── phi (TH1D) ──────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/80 bins, cf. 8.94427190999916
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── pt (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/50 bins, cf. 7.0710678118654755
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── px (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/50 bins, cf. 7.0710678118654755
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── py (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/50 bins, cf. 7.0710678118654755
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── pz (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/95 bins, cf. 9.746794344808963
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 2957.0+-54.378304497290095 vs.
2957.0+-54.378304497290095: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────────────── q (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/2 bins, cf. 1.4142135623730951
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── vt (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/27 bins, cf. 5.196152422706632
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── vx (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/62 bins, cf. 7.874007874011811
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── vy (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/62 bins, cf. 7.874007874011811
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── vz (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/82 bins, cf. 9.055385138137417
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
Comparing... ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100% 0:00:00
╭──────────────────────────────────────────────────────────────────────────────╮
│ ✅ SUCCESS │
│ 13 checked items valid │
╰──────────────────────────────────────────────────────────────────────────────╯
Making plots ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100% 0:00:04
::endgroup::
Found HistConfig vx|vy|vz for vx : nbins=100 min=-0.1 max=0.1 label=None
Found HistConfig vx|vy|vz for vy : nbins=100 min=-0.1 max=0.1 label=None
Found HistConfig vx|vy|vz for vz : nbins=100 min=-0.1 max=0.1 label=None
Found HistConfig vz for vz : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig vt for vt : nbins=100 min=-4.0 max=4.0 label=None
Found HistConfig p|pt for px : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for px : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig p|pt for py : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for py : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig p|pt for pz : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig px|py|pz for pz : nbins=100 min=-200.0 max=200.0 label=None
Found HistConfig m for m : nbins=100 min=0.0 max=0.15 label=None
Found HistConfig q for q : nbins=100 min=-2.0 max=2.0 label=None
Found HistConfig eta for eta : nbins=100 min=-3.0 max=3.0 label=None
Found HistConfig p|pt for phi : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig phi for phi : nbins=100 min=-4.0 max=4.0 label=None
Found HistConfig p|pt for pt : nbins=100 min=0.0 max=200.0 label=None
Found HistConfig p|pt for p : nbins=100 min=0.0 max=200.0 label=None
::group::Comparing physmon/particles_initial_geant4_hist.root vs. CI/physmon/reference/particles_initial_geant4_hist.root
╭────────────────────────────── Comparing files: ──────────────────────────────╮
│ Monitored: physmon/particles_initial_geant4_hist.root │
│ Reference: CI/physmon/reference/particles_initial_geant4_hist.root │
╰──────────────────────────────────────────────────────────────────────────────╯
╭─────────────────────────────── Configuration ────────────────────────────────╮
│ Config( │
│ checks={ │
│ '*': { │
│ 'Chi2Test': {'threshold': 0.01}, │
│ 'KolmogorovTest': {'threshold': 0.68}, │
│ 'RatioCheck': {'threshold': 3}, │
│ 'ResidualCheck': {'threshold': 1}, │
│ 'IntegralCheck': {'threshold': 3} │
│ } │
│ } │
│ ) │
╰──────────────────────────────────────────────────────────────────────────────╯
────────────────────────────────── eta (TH1D) ──────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/98 bins, cf. 9.899494936611665
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────────────── m (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/3 bins, cf. 1.7320508075688772
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
─────────────────────────────────── p (TH1D) ───────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/100 bins, cf. 10.0
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 2866.0+-53.53503525729669 vs.
2866.0+-53.53503525729669: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
────────────────────────────────── phi (TH1D) ──────────────────────────────────
✅ Chi2Test 1.0 > 0.01
✅ KolmogorovTest 1.0 > 0.68
✅ RatioCheck (a/b - 1) / sigma(a/b) > 3 for 0/80 bins, cf. 8.94427190999916
✅ ResidualCheck pull < 1 in 100/100 bins, cf. 10.0
✅ IntegralTest Intregal: 3000.0+-54.772255750516614 vs.
3000.0+-54.772255750516614: (int_a - int_b) / sqrt(sigma(int_a)^2 +
sigma(int_b)^2) = 0.00 < 3
──────────────────────────
Loading