Update freeradius to v3.0.17 and fix module builds #131

coyhile · 2018-08-05T19:51:42Z

Update freeradius to freeradius-3.0.17
Fix builds of various modules that were failing.

These modules ended up pulling in a phantom LDAP dependency on SmartOS because configure would find the system LDAP headers, then try to build the LDAP module in addition to the particular module in question. An explicit --without-rlm_ldap in each relevant Makefile allows the builds to do what we expect.

Release 2.2.6 Sun August 12 2018 Bug fixes: #170 #206 Avoid doing arithmetic with NULL pointers in XML_GetBuffer #204 #205 Fix 2.2.5 regression with suspend-resume while parsing a document like '<root/>' Other changes: #165 #168 Autotools: Fix docbook-related configure syntax error #166 Autotools: Avoid grep option `-q` for Solaris #167 Autotools: Support ./configure DOCBOOK_TO_MAN="xmlto man --skip-validation" #159 #167 Autotools: Support DOCBOOK_TO_MAN command which produces xmlwf.1 rather than XMLWF.1; also covers case insensitive file systems #181 Autotools: Drop -rpath option passed to libtool #188 Autotools: Detect and deny SGML docbook2man as ours is XML #188 Autotools/CMake: Support command db2x_docbook2man as well #174 CMake: Introduce option WARNINGS_AS_ERRORS, defaults to OFF #184 #185 CMake: Introduce option MSVC_USE_STATIC_CRT, defaults to OFF #207 #208 CMake: Introduce option XML_UNICODE and XML_UNICODE_WCHAR_T, both defaulting to OFF #175 CMake: Prefer check_symbol_exists over check_function_exists #176 CMake: Create the same pkg-config file as with GNU Autotools #178 #179 CMake: Use GNUInstallDirs module to set proper defaults for install directories #208 CMake: Utilize expat_config.h.cmake for XML_DEV_URANDOM #180 Windows: Fix compilation of test suite for Visual Studio 2008 #131 #173 #202 Address compiler warnings #187 #190 #200 Fix miscellaneous typos Version info bumped from 7:7:6 to 7:8:6 Release 2.2.5 Tue October 31 2017 Bug fixes: #8 If the parser runs out of memory, make sure its internal state reflects the memory it actually has, not the memory it wanted to have. #11 The default handler wasn't being called when it should for a SYSTEM or PUBLIC doctype if an entity declaration handler was registered. #137 #138 Fix a case of mistakenly reported parsing success where XML_StopParser was called from an element handler #162 Function XML_ErrorString was returning NULL rather than a message for code XML_ERROR_INVALID_ARGUMENT introduced with release 2.2.1 Other changes: #106 xmlwf: Add argument -N adding notation declarations #75 #106 Test suite: Resolve expected failure cases where xmlwf output was incomplete #127 Windows: Fix test suite compilation #126 #127 Windows: Fix compilation for Visual Studio 2012 Windows: Upgrade shipped project files to Visual Studio 2017 #33 #132 tests: Mass-fix compilation for XML_UNICODE_WCHAR_T #129 examples: Fix compilation for XML_UNICODE_WCHAR_T #130 benchmark: Fix compilation for XML_UNICODE_WCHAR_T #144 xmlwf: Fix compilation for XML_UNICODE_WCHAR_T; still needs Windows or MinGW for 2-byte wchar_t #9 Address two Clang Static Analyzer false positives #59 Resolve troublesome macros hiding parser struct membership and dereferencing that pointer #6 Resolve superfluous internal malloc/realloc switch #153 #155 Improve docbook2x-man detection #160 Undefine NDEBUG in the test suite (rather than rejecting it) #161 Address compiler warnings Version info bumped from 7:6:6 to 7:7:6

pkgsrc changes: - Update MASTER_SITES - Remove unused USE_LIBTOOL (libtool was not and is not used) - Only pod2man is needed as a tool, avoid to include perl bl3 Changes: 3.20160805.1 - Fix release tool problem. cflags.sh was missing from the previous two releases. `make test-package-build` now works correctly on OSX 10.11 and Fedora 23. 3.20160804.2 - Fix some bugs in the Makefile especially for OS X / macOS Sierra (Misty De Meo) 3.20160804.1 - Fix compilation problems on OSX 10.12 aka macOS Sierra. (#138; Jordan Sissel and Misty De Meo) - Fix memory leaks in window search and charcode map lookups (Markus Roth) - xdotool selectwindow (xdo_select_window_with_click) now only selects the window if mouse button 1 is pressed. Any other buttons will cause this selection to be aborted. (#136, #137; Jordan Sissel and Yuri D'Elia) - Fix bug where `xdotool click` with --clearmodifiers can sometimes leave stuck keys or mouse buttons. (#102, Aurelien Lourot) - windowmove now supports coordinates as a percentage of screen size. For example, a move to 50% 50% would move the window such that the top-left corner of the window is in the center of the screen. (#92, #27; Collin Guarino) - Typing commands (key and type) will now try to use XTEST instead of XSendEvent in a special circumstance. If the window id given (by window stack or the --window flag) is the currenly-focused window, key sequences will be sent using XTEST. (#85, mpnolan) - getmouselocation, getwindowgeometry, and search commands: now supports --shell and --prefix for having stdout be consumable by bash or similar shells. (#80, yatsek) - xdotool scripts such as running via `xdotool -` will now execute commands as lines of input are read. The previous behavior waited until stdin closed before executing anything. (#131, abensj) 3.20150503 - Lots of changes over the past 4 years, but with many folks telling me to do another release tarball, here it is. We can backfill the changelog later.

Provided by Coy Hile in TritonDataCenter#131. Fixes an issue where the module builds would fail if they found a system LDAP. Fix print-PLIST while here. FreeRADIUS 3.0.17 Tue 17 Apr 2018 14:00:00 EDT urgency=low Feature improvements * Add CURLOPT_CAINFO. Patch from Nicolas C. #2167 * "stats home server" now supports "src IPADDR", to specify home server also by source IP. Fixes #2169. * Add Dockerfiles for a selection of common systems. * Increase number of permitted file descriptors, for systems with many home servers. * Add TLS-Client-Cert-X509v3-Extended-Key-Usage-OIDs. Patch from Isaac Boukris. Fixes #2205. * Update main READMEs. Patches from Matthew Newton. * Added dictionary.mimosa Bug fixes * Don't call post-proxy twice when proxying to a virtual server. Matthew Newton, #2161. * Use "raw" string value for shared secrets and dynamic clients. It now parses strings with backslashes and "special characters" correctly. Fixes #2168. * Fix RuntimeDirectory for RedHat, from Alan Buxey. * Relax checks in 'if' parser from Isaac Bourkis * Minor cleanups for %{debug_attr:&request} from Isaac Boukris. * Be more aggressive about cleaning up cached certificate attributes, due to deficiencies in OpenSSL. Reported by Nicolas Reich. * Be more accepting when parsing IPv6 addresses. Bug noted by Klara Mall. * Fix double free in rlm_sql. Fixes #2180. * rlm_detail now writes empty Access-Accept packets. * rlm_python can now create tagged attributes. * Don't crash on duplicate realm + authhost / accthost. Bug found by Richard Palmer. * Allow partial certificate chain to trusted CA. Fixes #2162 * Treat SSL_read() returning zero as error. Fixes #2164. * detail writer now checks if the file was renamed or deleted. * Add User-Name to Access-Accept if EAP-Message exists, not Stripped-User-Name. * RedHat Systemd updates. Fixes #2184 * Use correct API for State variable in rlm_securid. * Remove broken radclient option "-i". * Fix "users" file (and hints, etc). So that it does not get confused about entry ordering with multiple $INCLUDEs. * Fix rlm_sql to expand the un-escaped string, not the raw string. * Link default and inner-tunnel only if they exist. Fixes #2206. * Don't use both IP_PKTINFO and IP_SENDSRCADDR. * Always install signal handler for SIGINT (needed by Docker). * Fix intermediate CA flow for OCSP. Fixes #2160. Intermediate certs which are not self-signed will now be checked. * sqlippool now returns "fail" if it fails IP allocation. * Fix rlm_yubikey to look for correct attribute in replay attack check.

coyhile · 2018-10-05T19:52:53Z

@jperkin It looks like some of these still didn't build automated for 2018Q3. Can you point me at the logs in manta, and I'll see if I can figure out what's up.

jperkin · 2018-10-08T12:22:19Z

Yeh they're here: http://us-east.manta.joyent.com/pkgsrc/public/reports/2018Q3/x86_64/20181005.1544/meta/report.html

I'm testing the obvious fix now..

jperkin · 2018-10-09T08:13:13Z

I fixed this in trunk with NetBSD@4bd5142 and back-ported to 2018Q3, these are now available.

Changes since b130: Beta #132 - 29.01.2019 - Fixed a bug where the sampling position line in smp. ed. could be drawn wrongly for a split second when switching between samples you're jamming. (samples, not instruments). - Code cleanup Beta #131 - 26.01.2019 - The linear interpolation routine in the audio channel mixer has been replaced with quadratic interpolation. This shouldn't cut off as much treble in the sound as linear interpolation. Though it comes with a price: The audio channel mixer requires slightly more CPU power, but it's still a relatively fast mixer. If you listen closely to songs with a lot of treble, you'll (hopefully) hear that they feel more life-like than before. Please note that this makes a minor difference, don't expect a lot! - Fixed a bug where the mouse cursor could be stuck in busy mode (thus blocking the program) when certain errors happened during loading/saving. - Saving an instrument now uses half the amount of RAM as before.

Changes since 1.5.2: Disable EGL on macOS Fix build on macOS [#176, Emmanuele Bassi] Add macOS tests Fix build with uClibc [#181, Emmanuele Bassi] Fix GLES3 symbol lookup [Adam Jackson] Fix conditional compilation [#184, Zhao Zhili] Require Meson 0.47 Fix Autotools build with EGL-X11 support [#188, Emmanuele Bassi] Changes since 1.5.1: Fix the detection of the -z,relro linker flag Query the EGL context version when bootstrapping on GLES [Adam Jackson] Avoid inadvertedly loading libraries when probing for them [Adam Jackson] Issue #169: Fix build on FreeBSD [Ting-Wei Lan] Consistently use abort() instead of exit() for internal state checks Issue #171: Fix a performance regression in the global function pointer trampolines introduced by using -Bsymbolic-functions Improve performance when using GL function pointers like glAlphaFunc [Adam Jackson] Changes since 1.5.0: Do no add pkg-config dependencies on gl on systems that do not use pkg-config, like macOS and Windows [Tom Schoonjans, #156] Generalise checks for dlvsym [Ross Burton, #158] Add an option for disabling building the test suite [Ross Burton] Typo fixes in the comments and documentation [luz.paz, #159] Simplify the Meson configuration logic for EGL and GLX [Eric Engestrom, #162] Use assert when no context is found [Adam Jackson, #166] Remove a test superceded by GLVND [#165] Avoid Meson warnings when testing for linker arguments Changes from Epoxy 1.4.3 Bump the Meson dependency to 0.44.1 Include Xlib.h in the tests that use X11 API Update the GL registry to OpenGL 4.6 Add gl and egl private dependencies in the pkg-config file Allow building Epoxy without X11 support Rename the Meson configuration options to be more idiomatic New API: epoxy_set_resolver_failure_handler() epoxy_glsl_version() epoxy_extension_in_string() Issues fixed #128 - Fix macOS linker flags [Tom Schoonjans] #129 - Use GLVND if available [Adam Jackson] #134 - Add fallback definition for EGL_CAST [Daniel Stone] #133 - Try even harder to not load GLX [Adam Jackson] #138 - Fix the libOpenGL soname [Adam Jackson] #137 - Update differences with GLEW [Nigel Stewart] #131 - Add epoxy_set_resolver_failure_handler() [Adam Jackson] #140 - Fix pointer mismatch on Windows 10 [danem] #141 - Define visibility flags for static builds [Dylan Baker] #136 - Expose epoxy_extension_in_string() [Lyude Paul] #151 - Use correct guard for Android builds [Robert Bragg] #154 - Fix dlwrap for glvnd [Adam Jackson] #155 - Respect DLOPEN_LIBS [Michał Górny] #143 - Fix printf family usage [Ikey Doherty] #152 - Do not use OPENGL_LIB on Android #145 - Add epoxy_glsl_version()

******************************************************************************* Version 1.8.4 ******************************************************************************* 2017-11-17 Marcelo Jimenez <mroberto(at)users.sourceforge.net> GitHub #57 - 1.8.3 broke ABI without changing SONAME Opened by jcowgill This change in 1.8.3 broke the ABI and therefore the SONAME should have been changed (ie: age reset to 0): EXPORT_SPEC int UpnpAddVirtualDir( /*! [in] The name of the new directory mapping to add. */ - const char *dirName); + const char *dirName, + /*! [in] The cookie to associated with this virtual directory */ + const void *cookie, + /*! [out] The cookie previously associated, if mapping is already present */ + const void **oldcookie); If only the cookie argument was added, you could probably get away with this because all that would happen is that a garbage value is passed around without being used. With the addition of oldcookie, any old programs will not initialise this value and will probably segfault when libupnp tries to write to it. ******************************************************************************* Version 1.8.3 ******************************************************************************* 2017-09-07 Dave Overton <david(at)insomniavisions.com> Add userdata/cookie to virtualDir callbacks As with the main Device APIs (UpnpRegisterRootDevice etc), it is useful to have a userdata/cookie pointer returned with each callback. This patch allows one cookie per registered path which enables a variety of functionality in client apps. 2017-09-03 Uwe Kleine-König <[email protected]> Fix large file system support libupnp uses large file support (if available). If a program linking to libupnp does not however it creates mismatches in callframes. See Issue #51 for the results. This simplifies LFS support by using AC_SYS_LARGEFILE_SENSITIVE instead of manually defining _LARGE_FILE_SOURCE and _FILE_OFFSET_BITS (which is useless on architectures where the size of off_t is fixed). Furthermore additional logic is introduced to catch a library user without 64 bit wide off_t on such a platform. upnp.h also makes use of off_t, but as this file includes FileInfo.h, the latter is the single right place for this check. This fixes #52 which is a generalized variant of #51. 2017-08-19 Uwe Kleine-König <[email protected]> configure.ac: Drop copying of include files The comment suggests this is for windows compilation. It should be easily possible to add the source directory as an include path to the windows compiler, too, so drop this. (Otherwise this should better be done using AC_CONFIG_COMMANDS.) 2017-09-03 Uwe Kleine-König <[email protected]> Let source code use autoconfig.h not the public upnpconfig.h The former is the one supposed to be used for internal code. upnpconfig.h is only for public stuff. 2017-08-19 Uwe Kleine-König <[email protected]> configure.ac: Fix typo s/optionnal/optional/ 2017-08-08 Marcelo Jimenez <mroberto(at)users.sourceforge.net> Fix broken samples when configured with --disable-ipv6. ******************************************************************************* Version 1.8.2 ******************************************************************************* 2017-07-24 Michael Osipov Initialize in_addr and in6_addr to avoid garbage output if never written If any of the address families isn't available in UpnpGetIfInfo(), especially IPv6, always init both structs with zero to avoid garbage output with inet_ntop() to gIF_IPV4 and gIF_IPV6. See v00d00/gerbera#112 (https://github.com/v00d00/gerbera/issues/112) for consequences: bind for IPv6 will fail. 2013-10-28 Vladimir Fedoseev <va-dos(at)users.sourceforge.net> Attached patch allows to register multiple clients from single app. 2014-11-14 Philippe <philippe44ca(at)users.sourceforge.net> Hi - I recently compiled libupnp on C++ Builder XE7 and had to do a few changes to make it work. In thase this helps, I've generated a small patch file. 2015-04-30 Hugo Beauzée-Luyssen <chouquette(at)users.sourceforge.net> When building using a strict mode (-std=c++11 instead of -std=gnu++11, for instance), the WIN32 macro isn't defined. The attached patch fixes it by using _WIN32 instead. 2015-02-06 Jean-Francois Dockes <[email protected]> Queue events on their subscription object instead of adding them to the thread pool immediately. Events destined for a non-responding control point would flood the thread pool and prevent correct dispatching to other clients, sometimes to the point of disabling the device. Events are now queued without allocating thread resources and properly discarded when a client is not accepting them. 2015-02-03 Jean-Francois Dockes <[email protected]> genaInitNotify()/genaInitNotifyExt() and genaNotifyAll()/genaNotifyAllExt() are relatively complicated methods which only differ by the format of an input parameter. This update extracts the common code for easier maintenance, esp. relating to the queueing modifications to follow. ******************************************************************************* Version 1.8.1 ******************************************************************************* 2017-04-26 Marcelo Jimenez <mroberto(at)users.sourceforge.net> Fix some compiler warning messages on md5.c 2017-03-07 Fabrice Fontaine <fontaine.fabrice(at)gmail.com> Enable IPv6 by default 2017-03-07 Fabrice Fontaine <fontaine.fabrice(at)gmail.com> Move threadutil source code to libupnp With this patch, threadutil library is removed as the only public header that has been kept in 1.8.x is ithread.h which is mainly a wrapper to pthread with inline functions. threadutil source code will now be a part of libupnp library. ******************************************************************************* Version 1.8.0 ******************************************************************************* 2014-01-15 Peng <howtofly(at)gmail.com> Fix memory leaks. 2013-04-27 Thijs Schreijer <thijs(at)thijsschreijer.nl> Renamed SCRIPTSUPPORT to IXML_HAVE_SCRIPTSUPPORT for consistency. Also updated autoconfig and automake files, so it also works on non-windows. Option is enabled by default, because it adds an element to the node structure. Not using an available field is better than accidentally using an unavailable field. 2012-07-11 Thijs Schreijer <thijs(at)thijsschreijer.nl> Changed param to const UpnpAcceptSubscriptionExt() for consistency 2012-06-07 Thijs Schreijer <thijs(at)thijsschreijer.nl> updated ixmlDocument_createAttributeEx() and ixmlDocument_createAttribute() to use parameter DOMString instead of char * (same but now consistent) 2012-05-06 Thijs Schreijer <thijs(at)thijsschreijer.nl> Added script support (directive SCRIPTSUPPORT) for better support of garbage collected script languages. The node element gets a custom tag through ixmlNode_setCTag() and ixmlNode_getCTag(). And a callback upon releasing the node resources can be set using ixmlSetBeforeFree() See updated readme for usage. 2012-03-24 Fabrice Fontaine <fabrice.fontaine(at)orange.com> SF Bug Tracker id 3510595 - UpnpDownloadXmlDoc : can't get the file Submitted: Marco Virgulti ( mvirg83 ) - 2012-03-23 10:08:08 PDT There is a problem, perhaps, during downloading a document by UpnpDownloadXmlDoc. During debugging i've found that in an not exported api (unfortunately i forgot the code line...) where it is setted a local variable "int timeout" to -1 then passed directly to another function for sending data through tcp socket. I patched this setting it to 0 (there is an IF section that exits if timeout < 0). It is normal behavior or it is a bug? 2012-03-08 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com> Check for NULL pointer in TemplateSource.h calloc can return NULL so check for NULL pointer in CLASS##_new and CLASS##_dup. 2012-03-08 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com> Replace strcpy with strncpy in get_hoststr Replace strcpy with strncpy to avoid buffer overflow. 2012-03-08 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com> Memory leak fix in handle_query_variable variable was never freed. 2011-02-07 Chandra Penke <chandrapenke(at)mcntech.com> Add HTTPS support using OpenSSL. HTTPS support is optional and can be enabled by passing the --enable-open-ssl argument to the configure script. The following methods are introduced to the public API: UpnpInitOpenSslContext When enabled, HTTPS can be used by using "https://" instead of "http://" when passing URLs to the HTTP Client API. 2011-02-07 Chandra Penke <chandrapenke(at)mcntech.com> Refactor HTTP Client API to be more generic. The following features are added: - Support for persistent HTTP connections (reusing HTTP connections). Tthis is still a work in progress and relies on applications to interpret the 'Connection' header appropriately. - Support for specifying request headers when making requests. Useful for interacting with web services that require custom headers. - Support for retrieving response headers (this is a API only change, some more work needs to be done to implement the actual functionality. Specifically copy_msg_headers in httpreadwrite.c needs to be implemented) - Common API for all HTTP methods. - Support for PUT, and DELETE methods. The following methods are introduced to the public HTTP Client API UpnpOpenHttpConnection, UpnpCloseHttpConnection, UpnpMakeHttpRequest, UpnpWriteHttpRequest, UpnpEndHttpRequest, UpnpGetHttpResponse, UpnpReadHttpResponse. Removed a lot of duplicate code in httpreadwrite.c 2011-01-17 Chandra Penke <chandrapenke(at)mcntech.com> Include upnpconfig.h in FileInfo.h to automatically include large file macros 2011-01-17 Chandra Penke <chandrapenke(at)mcntech.com> Fix for warnings Apple systems related to macros defined in list.h. In list.h, in apple systems, undefine the macros prior to defining them. 2011-01-16 Marcelo Jimenez <mroberto(at)users.sourceforge.net> Fix for UpnpFileInfo_get_LastModified() in http_MakeMessage(). UpnpFileInfo_get_LastModified() returns time_t, and http_MakeMessage() takes a "time_t *". Thanks to Chandra Penke for pointing the bug. 2010-11-22 Marcelo Jimenez <mroberto(at)users.sourceforge.net> Template object for ssdp_ResultData. 2010-11-10 Fabrice Fontaine <fabrice.fontaine(at)orange-ftgroup.com> Support for "polling" select in sock_read_write. Currently, in sock_read_write function, if the timeout is 0, pupnp realizes a "blocking" select (with an infinite timeout). With this patch, if timeout is set to 0, pupnp will realize a "polling" select and returns immediately if it can not read or write on the socket. This is very useful for GENA notifications when pupnp is trying to send events to a disconnected Control Point. "Blocking" select can now be done by putting a negative timeout value. 2010-09-18 Chandra Penke <chandrapenke(at)mcntech.com> This is a minor build fix. The new Template*.h files added in the latest code need to be exported. Patch against the latest sources is attached. 2010-08-22 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * upnp/src/api/Discovery.c: Fix a serious bug and memory leak in UpnpDiscovery_strcpy_DeviceType(). Thanks to David Blanchet for the patch. 2010-04-25 Marcelo Jimenez <mroberto(at)users.sourceforge.net> Separation of the ClientSubscription object. 2010-04-24 Marcelo Jimenez <mroberto(at)users.sourceforge.net> Protect the object destructors agains null pointers on deletion, which should be something valid. 2010-03-27 Marcelo Jimenez <mroberto(at)users.sourceforge.net> SF Patch Tracker [ 2987390 ] upnp_debug vs. ixml_debug Thanks for the load of updates, I'm still assimilating them ! Could I make a suggestion though? The addition of printNodes(IXML_Node) to upnpdebug a dds a new dependency on ixml.h for anything using upnpdebug.h. I'm making quite a bit of use of upnpdebug in porting things to version 1.8.0, and I'd prefer it if printNodes could be added to ixmldebug.h instead. I'm attach ing a patch, what do you think ? Nick 2010-03-27 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Forward port of svn revision 505: SF Patch Tracker [ 2836704 ] Patch for Solaris10 compilation and usage. Submitted By: zephyrus ( zephyrus00jp ) 2010-03-20 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * SF Patch Tracker [ 2969188 ] 1.8.0: patch for FreeBSD compilation Submitted By: Nick Leverton (leveret) Fix the order of header inclusion for FreeBSD. 2010-03-20 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Forward port of svn revision 502: SF Patch Tracker [ 2836704 ] Search for nested serviceList (not stopping at the first lis Submitted By: zephyrus ( zephyrus00jp ) Internet Gateway Device description contains nested serviceList (rootdevice -> servicelist, subdevice and subdevice has the lower-level serviceList, etc..) Unfrotunately, the sample code sample_util.c used by tv_device sample, etc. has a code that looks for only the first top-level serviceList. This results in the failure to read all the services of an IGD xml description. Attached patch modifies this behavior and looks for the service by visiting all the serviceList in xml document in turn. With the modified patch (ad additional modification), I could simulate an IGD device and created a modified control program for that. Patch against 1.6.6 TIA. 2010-03-20 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * SF Patch Tracker [ 2973319 ] Problem in commit 499 Submitted By: Nick Leverton (leveret) Afraid that this doesn't compile, it seems retval should be retVal in two places. 2010-03-16 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Fix for the ithread_mutex_unlock() logic in UpnpInit(). Thanks for Nicholas Kraft. 2010-03-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * SF Patch Tracker [ 2962606 ] Autorenewal errors: invalid SID, too-short renewal interval Submitted By: Nick Leverton (leveret) Auto-renewals send an invalid SID due to a missing UpnpString_get_String call. They also send a renewal interval of 0 instead of copying it from the original subscription. 2010-03-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * SF Patch Tracker [ 2964685 ] patch for avoiding inet_ntoa (1.8.0) Submitted By: Nick Leverton (leveret) Seems like SF's tracker won't let me add a patch to someone else's issue ?! This refers to https://sourceforge.net/support/tracker.php?aid=2724578 The calls to inet_ntoa are in getlocalhostname(), which is called from UpnpInit when it is returning the bound IP address. UpnpInit/getlocalhostname hasn't been updated to IPv6, I presume this is deliberate so that it doesn't start returning IPv6 addresses and overwriting the caller's IPv4-sized allocation. The attached patch just updates getlocalhostname to use inet_ntop instead of inet_ntoa, and also documents the fact that UpnpInit is IPv4 only whilst UpnpInnit2 is both IPv4 and IPv6. A fuller solution might be to change UpnpInit to use some variant on UpnpGetIfInfo. UpnpInit could still be left as IPv4 only if desired - perhaps UpnpGetIfInfo could take an option for the desired address family. getlocalhostname and its own copy of the interface scanning code would then be redundant. I don't have IPv6 capability here though so I'm reluctant to change the IPv6 code, as I have no way to test it. 2010-03-15 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * SF Patch Tracker [ 2724578 ] patch for avoiding memory leaks when add devices each time a device been added, UpnpInit() is called, on exit, UpnpFinish() is called, but the memories allocated by ThreadPoolInit() may lost because there's no code to call ThreadPoolShutdown() to release the memories. And inet_ntoa() is not thread safe, so in my patch, I substitute inet_ntoa() with inet_ntop(). 2010-03-14 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * SF Patch Tracker [ 2964687 ] Add new string based accessors to upnp object API As per email to pupnp-devel, this is the patch to add the _strget_ accessors for string-like objects in the interface. Will add a further patch shortly to udpate the sample programs. 2008-06-27 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Nicholas Kraft's patch to fix some IPv6 copy/paste issues. He reported to be getting infinite loops with the svn code. 2008-06-13 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * SF Bug Tracker [ 1984541 ] ixmlDocumenttoString does not render the namespace tag. Submitted By: Beliveau - belivo Undoing the patch that fixed this problem. In fact, there was no problem and the patch was wrong. 2008-06-11 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Ingo Hofmann's patch for "Content-Type in Subscription responses". Adds charset="utf-8" attribute to the CONTENT-TYPE header line. Hi, I have found an inconsistency regarding the text/xml content-type returned by libupnp. It looks like only subscription responses send "text/xml" where all other messages contain "text/xml; charset="utf-8"". Since I'm working on an DLNA device the latter behaviour is mandatory. I changed the according lines in gena_device.c (see attached patch). I'm not sure if it would be ok for other device to have the charset field but it would help me a lot :) Best regards, Ingo 2008-06-04 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * SF Bug Tracker [ 1984541 ] ixmlDocumenttoString does not render the namespace tag. Submitted By: Beliveau - belivo The problem occurs when converting a xml document using ixmlDocumenttoString containing a namespace tag created with ixmlDocument_createElementNS. The namespace tag doesn't get rendered. example: The following code fragment prints: <?xml version="1.0"?> <root></root> instead of: <?xml version="1.0"?> <root xmlns="urn:schemas-upnp-org:device-1-0"></root> Code: #include <stdlib.h> #include <upnp/ixml.h> int main() { IXML_Document* wDoc = ixmlDocument_createDocument(); IXML_Element* wRoot = ixmlDocument_createElementNS(wDoc, "urn:schemas-upnp-org:device-1-0", "root"); ixmlNode_appendChild((IXML_Node *)wDoc,(IXML_Node *)wRoot); DOMString wString = ixmlDocumenttoString(wDoc); printf(wString); free(wString); ixmlDocument_free(wDoc); return 0; } The problem was in the printing routine, not in the library data structure. 2008-05-31 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Charles Nepveu's suggestion of not allocating a thread for MiniServer when it is not compiled. 2008-05-24 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Ported Peter Hartley's patch to compile with mingw. 2008-05-24 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Added some debug capability to ixml. 2008-05-02 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Merged Charles Nepveu's IPv6 work. libupnp now is IPv6 enabled. 2008-02-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Breaking API so that we now hide internal data structures. 2008-02-06 Marcelo Jimenez <mroberto(at)users.sourceforge.net> * Rewrote Peter Hartley's patch to include a new extra header field in FileInfo. ******************************************************************************* Version 1.6.22 ******************************************************************************* 2017-07-07 James Cowgill <james410(at)cowgill.org.uk> Replace MD5 impmplementation with public-domain version Currently the RSA MD5 implementation is used. Unfortunately the license has some potential issues: * The license does not explicitly allow distributing derivative works. This was the original argument used in [Debian #459516](https://bugs.debian.org/459516). * The license contains an advertising clause similar to the BSD 4-clause license. This is incompatible with the GPL and if it were enforced, would require RSA to be mentioned by pretty much everyone who uses pupnp. The simple solution is to replace it with a public domain implementation. I've taken OpenBSDs implementation and tweaked it slightly for use by pupnp by: - Adjusting the includes. - Removing the __bounded__ attributes which are specific to OpenBSD. - Using the standard integer types from stdint.h. - Using memset instead of explicit_bzero. 2016-12-16 Peter Pramberger <peterpramb(at)users.sf.net> ixml/test/test_document.c is missing the string.h include, therefore the compiler complains about an implicit declaration. ******************************************************************************* Version 1.6.21 ******************************************************************************* 2016-12-16 Gabriel Burca <gburca(at)github> If the error or info log files can not be created, use stderr and stdout instead. 2016-12-08 Uwe Kleine-König <uwe(at)kleine-koenig.org> Fix out-of-bound access in create_url_list() (CVE-2016-8863) If there is an invalid URL in URLS->buf after a valid one, uri_parse is called with out pointing after the allocated memory. As uri_parse writes to *out before returning an error the loop in create_url_list must be stopped early to prevent an out-of-bound access Bug: https://sourceforge.net/p/pupnp/bugs/133/ Bug-CVE: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2016-8863 Bug-Debian: https://bugs.debian.org/842093 Bug-Redhat: https://bugzilla.redhat.com/show_bug.cgi?id=1388771 2016-11-30 Uwe Kleine-König <uwe(at)kleine-koenig.org> miniserver: fix binding to ipv6 link-local addresses Linux requires to have sin6_scope_id hold the interface id when binding to link-local addresses. This is already in use in other parts of upnp, so portability shouldn't be in the way here. Without this bind(2) fails with errno=EINVAL (although ipv6(7) from manpages 4.08 specifies ENODEV in this case). Fixes: https://bugs.debian.org/813249 2016-09-15 Mathew Garret <(at)mjg59 (twitter)> SF Bug Tracker #132 CVE-2016-6255: write files via POST Submitted by: Balint Reczey in 2016-08-02 From Debian's BTS https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=831857 : From: Salvatore Bonaccorso [email protected] To: Debian Bug Tracking System [email protected] Subject: libupnp: write files via POST Date: Wed, 20 Jul 2016 11:03:34 +0200 Source: libupnp Version: 1:1.6.17-1 Severity: grave Tags: security upstream Justification: user security hole Hi See http://www.openwall.com/lists/oss-security/2016/07/18/13 and https://twitter.com/mjg59/status/755062278513319936 . Proposed fix: mjg59/pupnp-code@be0a01b Regards, Salvatore From Mathew Garret's commit: Don't allow unhandled POSTs to write to the filesystem by default ******************************************************************************* Version 1.6.20 ******************************************************************************* 2016-02-22 Jean-Francois Dockes <medoc(at)users.sf.net> SF Bugs #131, Creator: Jean-Francois Dockes I know it sounds crazy that nobody ever saw this, but the CONTENT-LENGTH value in GENA NOTIFY messages is too small by one. It appears that most current control points don't notice the extra character (an LF, which is validly there but not included in Content-Length), probably because their protocol handler is reasonably lenient, and because the missing body LF does not prevent parsing the XML. But there is a least one anal CP (Linn Kazoo) which barfs, because it reads all data until connection close and the size mismatch triggers a bug. "Proof": In gena_device.c:217 (notify_send_and_recv()) ret_code = http_SendMessage(&info, &timeout, "bbb", start_msg.buf, start_msg.length, propertySet, strlen(propertySet), CRLF, strlen(CRLF)); start_msg has all the headers, including the empty line. Content-length should be strlen(propertySet) + strlen(CRLF) (2) In gena_device.c:433 (AllocGenaHeaders()) rc = snprintf(headers, headers_size, "%s%s%"PRIzu"%s%s%s", HEADER_LINE_1, HEADER_LINE_2A, strlen(propertySet) + 1, HEADER_LINE_2B, HEADER_LINE_3, HEADER_LINE_4); HEADER_LINE_2A is "CONTENT-LENGTH: ". The following value should be strlen(propertySet) + 2 2016-01-07 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net> Fix for a reported integer overflow 2016-01-07 Jean-Francois Dockes <medoc(at)users.sf.net> 2016-01-07 Nick Leverton <nick(at)leverton.org> SF Patches #60, Creator: Jean-Francois Dockes When libupnp is configured with --enable-ipv6 but ipv6 is not available on the system (for example because the ipv6 code is not loaded in a Linux kernel as is the case by default on Raspbian), the ipv6 socket creation call will fail in miniserver.c and the library init will fail, even if the ipv4 initialisation would have succeeded. Let a library configured with --enable-ipv6 initialize in ipv4-only mode if ipv6 is not available instead of failing. This can happen if no ipv6 code is configured or loaded in the kernel. Don't fail if IPv6 is unavailable. We might be an IPv6 enabled distro build running on an IPv4-only custom kernel. 2016-01-07 Nick Leverton <nick(at)leverton.org> SF Bug Tracker #128, Creator: Nick Leverton redefining strndup causes "error: expected identifier or '(' before '__extension__'" Fix redefinition of strnlen and strndup These are available when HAVE_STRNDUP and HAVE_STRNLEN are defined, but libupnp provides an extern prototype anyway. Recent versions of glibc define this prototype differently, causing the following compile error: src/api/UpnpString.c:47:15: error: expected identifier or '(' before '__extension__' extern char *strndup(__const char *__string, size_t __n); 2016-01-07 Nick Leverton <nick(at)leverton.org> SF Bug Tracker #129, Creator: Nick Leverton shutdown() on UDP sockets logs ENOTCONN message. https://sourceforge.net/p/pupnp/bugs/129/ Fix ENOTCONN "Error in shutdown: Transport endpoint is not connected" When logging is enabled, ssdpserver logs bursts of "Error in shutdown: Transport endpoint is not connected" This is because shutdown() is not supported for UDP sockets and under recent UNIX specifications it returns ENOTCONN if used. 2016-01-07 Nick Leverton <nick(at)leverton.org> SF Bug Tracker #127, Creator: Klaus Fischer Miniserver uses INADDR_ANY instead of HostIP https://sourceforge.net/p/pupnp/bugs/127/ The internal miniserver.c uses INADDR_ANY instead of the HostIP/IfName provided when initializing libupnp. But, this HostIP/IfName gets used for the UDP socket when multicasting SSDP messages. Because of this, miniserver may end up sending from different IP address than ssdpserver. This patch causes miniserver to use the already known interface address. 2016-01-07 Marcelo Roberto Jimenez <mroberto(at)users.sourceforge.net> SF Bug Tracker #130, Creator: Shaddy Baddah infinite loop in UpnpGetIfInfo() under WIN32 Original code makes no sense. This patch should fix it. 2015-02-04 Shaun Marko <[email protected]> Bug tracker #124 Build fails with --enable-debug Build environment Fedora 21 X86-64 * gcc 4.9.2 How to repeat $ ./configure --enable debug $ make libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../upnp/inc -I./inc -I../threadutil/inc -I../ixml/inc -I./src/inc -pthread -g -O2 -Wall -MT src/api/libupnp_la-UpnpString.lo -MD -MP -MF src/api/.deps/libupnp_la-UpnpString.Tpo -c src/api/UpnpString.c -fPIC -DPIC -o src/api .libs/libupnp_la-UpnpString.o src/api/UpnpString.c:47:16: error: expected identifier or '(' before 'extension' extern char *strndup(const char *string, size_t __n); ^ Makefile:1016: recipe for target 'src/api/libupnp_la-UpnpString.lo' failed Reason for failure Build enables -O2 optimization flags which causes the inclusion of a macro implementation of strndup from include/bits/string2.h. Workarounds Disable optimization when configuring or making: $ configure CFLAGS='-g -pthread -O0' --enable-debug $ make or $ configure --enable-debug $ make CFLAGS='-g -pthread -O0' Define NO_STRING_INLINES $ export CFLAGS="-DNO_STRING_INLINES -O2" $ ./configure --enagble-debug $ make Fix * Don't declare strndup in src/api/UpnpString.c if it exists 2015-02-01 Jean-Francois Dockes <[email protected]> Out-of-tree builds seem to be currently broken, because ixml and threadutil files need an include path to include UpnpGlobal.h, and configure tries to copy files into a directory which it does not create. The patch fixes both issues. 2014-01-03 Peng <howtofly(at)gmail.com> rewrite soap_device.c 1) separate HTTP handling from SOAP handling 2) remove repeated validity check, each check is performed exactly once 3) fix HTTP status code per UPnP spec, SOAP spec and RFC 2774

v7: compton now requires uthash to build. xcb-xinerama is now mandatory. Improved build experience on FreeBSD. compton now detects what driver it is using. glFinish is used automatically when not using NVIDIA driver. This should reduce input lag. Window shadow parameter is tweaked so it won't get cut off at the edges. The experimental glx backend now uses OpenGL 3.3 core profile. New blur configuration syntax v6: Experimental new backends are integrated into compton vsync is now a boolean value, indicates whether vsync should be enabled. #130 xcb-xinerama is mandatory now. Build option xinerama is removed. New glx backend is feature complete. New xrender backend is feature complete. Better handling of X visuals and GLX FBConfigs #104 cf9125c Failure to parse config file is now a hard error. Fading, window state tracking is refactored. Deprecations --sw-opti is deprecated. Users who want to limit the paint rate should always just use --vsync. --glx-use-gpushader4 is deprecated --vsync-aggressive is deprecated Support for Composite < 0.2 dropped New glx backend won't support OpenGL < 3.0 --glx-swap-method is deprecated in favor of the easier to understand option --use-damage #131 --glx-copy-from-front and --glx-use-copysubbuffermesa are removed since they are deprecated 3 major releases ago.

pkgsrc changes: - Remove patch-filter_pdf.cxx (was a backport from upstream) and patch-Makefile.in (now `-r' option of `ln' is checked in configure phase) Changes: 1.25.11 ------- - cups-browsed: Really accept entries without printer name reported on a job status request (Issue #163). - cups-browsed: Strip IPP atrribute values reported by the printer on a get-printer-attributes request from white space (Pull request #166). 1.25.10 ------- - libcupsfilters: Added NULL checks when handling page size names as some of the page sizes in CUPS' PWG media list have a NULL PPD name (Ubuntu bug #1847488). 1.25.9 ------ - cups-browsed: Fix leaks in get_printer_attributes() function. - cups-browsed: Avoid infinite recursion on IPP 1.1 fallback. 1.25.8 ------ - cups-browsed: On a job status request accept also entries without the printer name being reported (Issue #163). - cups-browsed: Fall back to IPP 1.1 if a get-printer-attributes IPP request with IPP 2.x fails (Issue #124, Issue #163). - gstoraster: Use ".setfilladjust2" instead of the undocumented ".setfilladjust" PostScript command for Center-of-Pixel method to fill paths (Issue #164). 1.25.7 ------ - implicitclass, libcupsfilters: Fixes to solve an assertion error and printing to an Apple Raster printer (Issue #162, Ubuntu bug #1845286, Ubuntu bug #1845548). - cups-browsed: Do not try to resolve the network interface name on Avahi messages which are not interface-related (like "All for now"or "Cache exhausted", Issue #163). - Build system: The helper script ln-srf to build on systems with old ln was not included in the release tarballs (Issue #161). - pdftoraster: Fixed some bugs in output bitmap generation ( writePageImage() function): Segfault on output of up-side-down pages (back side when printing duplex on some printers), margin offsets not taken into account on monochrome jobs, CUPS_CSPACE_W color space not recognized as monochrome (Ubuntu bug #1845286). 1.25.6 ------ - implicitclass: Make sure the destination printer gets always set and do not pass on the cups-browsed-dest-printer when sending the job to the final destination (Issue #152, Pull request #159). - Build system: Support old ln versions without the -r option (Pull request #154, #157). - texttotext: Link with libiconv if needed (Pull request #155, #158). - foomatic-rip: Fix argument representation for raw queue debug mesaage (Pull request #153). 1.25.5 ------ - bannertopdf: Added missing "#include <cstring>" to pdf.cxx so that bannertopdf correctly builds with QPDF 9.0.0 (Issue #134, Issue #151, Gentoo bug #693498). - rastertopdf: Let the getIPPColorProfileName() function not return a pointer to a local variable (clang warning, Issue #150). - cups-browsed: If a locally generated queue (usually with "implicitclass://..." URI) left over from a previous (crashed) session is picked up on startup, do not set the URI as the remote printer's URI and do not cause a fatal error on a failed get-printer-attributes IPP request (Issue #148, Debian bug #939316). - pdftopdf: Do not preserve encryption, since the output already goes into the printer (Issue #146, Pull request #147). 1.25.4 ------ - imagetoraster: Do not call imagetops and pstoraster for classifications and page labels as these filters are not included any more with cups-filters. Classifications and page labels are currently not supported for direct image printing, only for PDF or PostScript input (which goes through pdftopdf). - imagetoraster, imagetopdf: Fixed auto-rotation of images to fit output page best (Issue #145). - pdftoraster: If the PPD contains several equally-sized page size entries which match the size of the input page and one is the size selected by the user via the "PageSize" or "media" option (or the default selection in the PPD) then prefer this one instead of simply the first matching one. - pdftoraster: If the input page size cannot be matched with one of the PPD's page sizes it is considered a custom size, fill the page size name field of the CUPS Raster header with "Custom.XXXxYYY" then. - pdftoraster: Match the input page size with a page size in the PPD only if the differences of the dimensions are less than 1%, also match the input page size against the imageable area of the PPD's page sizes if no match with the full page size is found (Issue #138). 1.25.3 ------ - Sample PPDs: In HP-Color_LaserJet_CM3530_MFP-PDF.ppd renamed "custom" choice of the option "stapleoption" to "customsize" as from CUPS 2.2.12 on "custom" is not accepted any more as a choice name in a PPD file. - cups-browsed: Fixed check whether the remote printer understands PWG Raster (Issue #141). 1.25.2 ------ - foomatic-rip: Fixed segmentation fault when running foomatic-rip by hand and the PRINTER environment variable is not set (Pull request #139). - cups-browsed: Added note to cups-browsed.conf and man page about IP-based URIs depending on the network interface used. - cups-browsed: For each DNS-SD-discovered printer register each DNS-SD discovery instance with network interface, family, and IPP type. When DNS-SD messages of instances disappearing show up, only unregister this instance and remove the printer only if no instance is left. This prevents a local queue of a still available printer being removed when Wi-Fi (= one interface) is turned off (Issue #136). - cups-browsed: If a remote printer is served from the local machine, prefer the "localhost"/loopback interface URI. - cups-browsed: If a remote printer is discovered more than once, use the new instance only if it has no downgrades and at least one upgrade compared to the old one. Features currently compared are IPP/IPPS, loopback interface or not, and discovery via CUPS legacy/LDAP/DNS-SD. - cups-browsed: If an Avahi-discovered entry comes through the "lo" interface, always use the host name "localhost". Use IP addresses instead of host names only if explicitly requested. - cups-browsed: Consider remote printer entries also as from the same printer if one has the local machine's network name and the other "localhost" as host name (Issue #136). 1.25.1 ------ - imagetopdf: Fixed crash when no PPD file was supplied (Pull request #133). - pdftoraster: Fixed offset issues leading to segmentation faults (Issue #131, Pull request #132). - pdftoraster: Added anti-aliasing for better raster image quality (Pull request #129). - pdftoraster: Added graceful handling of zero-page input (Issue #117, Pull request #127). 1.25.0 ------ - pdftoijs, pdftoopvp: Removed these deprecated filters completely as there is no demand for them any more. They also used unstable, undocumented APIs of Poppler. - pdftoraster: Changed from using unstable, undocumented APIs of Poppler to stable, documented ones, to improve maintainability of this filter, and with it of the cups-filters package. Thanks to Tanmay Anand for contributing this as his Google Summer of Code 2019 project. - libcupsfilters: Added support for color spaces CMY and RGBW when using filters without PPD file (mainly for development and debugging, option "print-color-mode" with values "cmy-XX" and "rgbw-XX" with XX being the number of bits per color). 1.24.0 ------ - cups-browsed: Integration of Deepak Patankar's Google Summer of Code 2018 project with the main goal of clustering different printers and automatically selecting the destination printers by job content and option/attribute settings. All changes of this release are done by Deepak as parts of his project. - cups-browsed, implicitclass: Support for mixed clusters of remote CUPS queues and IPP network printers. For this PPD files of remote CUPS queues are generated by cups-browsed based on IPP queries, as for native IPP printers, the number of jobs for load balancing is polled in a way that it works also with native IPP printers, the implicitclass backend sends jobs directky to the printer instead of re-queueing them via CUPS. - cups-browsed: Merge IPP attributes of several printers to combined attributes for the cluster to generate the cluster's PPD file, including PPD constraints for option combinations not fulfillable by any of the member printers, and finding reasonable, non-conflicting default settings, - cups-browsed: Selection algorithm for the destination printer for a job sent to the cluster. Based on the job settings requested such as page size, media type, print quality, ... the best most suitable printer in the cluster for the job will be selected. - cups-browsed, implicitclass: Filter jobs to clusters already locally. Due to the fact that a cluster's member printers are not exclusively non-raw CUPS queues with the complete filtering framework on the remote server, but also native IPP printers, we need to support generic driverless printers as destination. So we cannot pass on the input data unfiltered but need to filter locally. We let the cluster's PPD file emulate a PDF printer, letting the local CUPS queue of the cluster run pdftopdf and any pre-filters to turn the input into PDF and we let the implicitclass backend turn PDF into a format understood by the destination printer, supporting the 4 formats of driverless IPP printing: PDF, PWG Raster, Apple Raster, PCLm.

Switch from qt4 to qt5. Remove the qt4 option. CHANGELOG ========= BibleTime 2.11.2 The BibleTime team is proud to announce the immediate availability of BibleTime version 2.11.2 which is the second bugfix release in the stable 2.11 series of BibleTime. All users of BibleTime are encouraged to upgrade, especially users still using BibleTime version 2.10 or earlier. Notable changes since 2.11.1: Updated translations. Improved compatibility with Qt 5.11 (including bug #140) Fixed crash when clicking on "full syntax" (bug #134) Fixed Mag not always working with Hebrew / Strongs (bug #132) Fixed BibleTime startup on some versions of Windows (bug #119) Fixed Bookshelf Wizard buttons not being translated (bug #131) Fixed application icon directory to match the FreeDesktop standard Fixed bug which prevented installing of works (bug #124) BibleTime 2.11.1 The BibleTime team is proud to announce the immediate availability of BibleTime version 2.11.1 which is the first bugfix release in the stable 2.11 series of BibleTime. All users of BibleTime are encouraged to upgrade, especially users still using BibleTime version 2.10 or earlier. Notable changes since 2.11.0: Enhanced packaging for Windows. Enhanced some error messages. Updated translations. Thanks to all translators!. Improved build-time detection of Qt WebEngine. Fixed crash with Qt 5.9 (workaround for QTBUG-61213). Fixed apocryphal books not being properly displayed (#12). Fixed paragraphs being displayed incorrectly (#37). Fixed some greek dictionary modules not working in mag (#52). Fixed windows not starting on some Windows 7 computers (#90). Fixed a bug which hindered changing to second tab in Tabbed view (#91) Fixed Qt "More Info..." tab being blank (#92) Fixed crash when closing module display window with Qt 5.8 (#94) Fixed images not being displayed (#95). Fixed reloading of "All Text Windows" shortcuts not working (#102). Fixed problem with Save - Yes/No dialog and editing a Personal commentary (#105). BibleTime 2.11.0 Thanks to the great mercy of our Savior and Lord, king Jesus Christ, the BibleTime team is yet again pleased to announce the immediate availability of BibleTime version 2.11.0, which is the first full release in the the stable 2.11 series of BibleTime. All users of BibleTime are encouraged to upgrade, including users of the BibleTime version 2.10 series. Notable changes since the 2.10 series: Redesigned bookshelf manager Many bugfixes and optimizations Build requirements changes: A C++11 compiler is now required Qt 5 or later is now required xml-po is no longer required BibleTime 2.11 RC 2 The BibleTime team is proud to announce the immediate availability of BibleTime version 2.11 RC 2, which is the second release candidate in the stable 2.11 series of BibleTime, with a number of bugs fixed since RC 1. Notable changes since the 2.10 series: Many bugfixes and optimizations Redesigned bookshelf manager Build requirements changes: A C++11 compiler is now required Qt 5 or later is now required xml-po is no longer required BibleTime 2.11 RC 1 The BibleTime team is proud to announce the immediate availability of BibleTime version 2.11_rc1, which is the first release candidate in the stable 2.11 series of BibleTime. Notable changes since the 2.10 series: Many bug fixes and optimizations Redesigned bookshelf manager Build requirements changes: A C++11 compiler is now required Qt 5 or later is now required xml-po is no longer required BibleTime 2.11 beta 1 The BibleTime team is proud to announce the immediate availability of BibleTime version 2.11_beta1, which is the first (and only) beta release in the stable 2.11 series of BibleTime. Notable changes since the 2.10 series: Many bug fixes and optimizations Redesigned bookshelf manager Build requirements changes: A C++11 compiler is now required Qt 5 or later is now required xml-po is no longer required

Motivated by wanting to build under more recent systems with newer OpenSSL. Many changes since 1.99.15 [v2.5][] - 2018-09-30 --------------------- ### Changes - macOS changes by Jo Rhett: - Add linking with `-lresolv` - Use Homebrew's CA trust store - Update REDAME with install help - Add support for selfhost.de DDNS ### Fixes - Fix #211: Only show DDNS server response on successful transaction - Fix #211: Improved error handling in OpenSSL back-end - Fix #214: Add `nochg` to list of good responses for custom providers - Fixes by Erich Sauvageau: - Fix #216: Add DNS lookup exception for `all.dnsomatic.com` - Fix #219: Add DNS lookup exception for `[email protected]` [v2.4][] - 2018-08-18 --------------------- ### Changes - Add support for Dynu DDNS provider ### Fixes - Add missing defines for `LLONG_MAX` and `LLONG_MIN` on some platforms - Fix #209: Update FreeDNS plugin to use v2 of their API to fetch update key - Fix #210: Use `~/.cache/inadyn` or `~/.inadyn` when running unprivileged [v2.3.1][] - 2018-02-12 ----------------------- This minor bug fix release holds Debian packaging fixes by André Colomb. ### Changes - Make .deb files an official part of releases ### Fixes - Fix installation of `inadyn` in `/usr/sbin` and symlink in `/usr/bin` - Rename debian/inadyn.links to be standards-compliant - Update deprecated build dependency for dh-systemd - Fix lintian warning about unsafe symlinks for build scripts - Version numbers containing a dash are inappropriate for 'native' packages, bump revision instead [v2.3][] - 2018-01-05 --------------------- ### Changes - Distribute `CONTRIBUTING.md` in release tarballs, by André Colomb - Clean up debug messages for HTTPS connections, by André Colomb - New build-depends, `libgnutls28-dev` for Debian/Ubuntu users and GnuTLS >= 3.0 for others, by André Colomb - Issue #192: Add `examples/*.conf` to source distribution, by André Colomb ### Fixes - TCP, not UDP, for `getaddrinfo()` hints + numeric lookups, by André Colomb - Disable SSL for checkip connections to SPDYN service, by André Colomb - Issue #186: Allow IPv6 for HTTP(S) connections, by André Colomb - Issue #189: Ignore premature session termination in GnuTLS, by André Colomb - Issue #193: Fix broken internal links in README.md, by André Colomb [v2.2.1][] - 2017-10-06 ----------------------- ### Fixes - Issue #174: `gnutls.c` missing `stdint.h`, fix for ArchLinux - Issue #179: Update easyDNS plugin to new API, by Nicholas Alipaz [v2.2][] - 2017-08-09 --------------------- ### Changes - Use HTTP by default for DYN.com checkip server, used by many DDNS providers that do not have their own. This change is far more user friendly since you no longer have to explicitly set `checkip-ssl = false` for the most common use-case. - Some DDNS providers have multiple IP addresses registered for the same service, as of this release Inadyn immediately tries to connect to the next listed addresses on connection problems. - Issue #153: Support for custom HTTP User Agent. Useful with providers that require using a specific brower. Set to, e.g. "Mozilla/4.0", or rely on the default "inadyn/VERSION" user agent. - Support for the `%%` format specifier in custom server URL's, as mentioned in issue #152. - Add support for a `.conf` syntax checker: `inadyn --check-config` - Add support for logging to `stderr` when running in foreground or without syslog enabled - Simplified provider name lookup in `.conf` file. Now substring match is used, resulting in support for `provider Dyn { ... }`. - Remove libite dependency by importing all its used files into inadyn. This should ease adoption by distributions and end users. All code is under free licenses: BSD, ISC. - Import Timur's Debian packaging, adding debconf support ### Fixes - Issue #152: Do not attempt to create PID file in oneshot mode (`-1`) - Issue #152: Must URL encode custom server URL's - Issue #170: Use configured `--prefix` not hard coded `/etc/inadyn.conf` - Issue #172: Use separate variable for `--iface` command line option and `.conf` file option [v2.1][] - 2016-12-04 --------------------- ### Changes - Use HTTPS instead of HTTP by default - Support for disabling HTTPS for `checkip-server`, per provider. Idea from Valery Frolov - Add `-I,--ident=NAME` option for syslog+pidfile name - Deprecate `--pidfile=NAME` option in favor of `--ident=NAME` ### Fixes - Issue #150: Custom update URL parser fixes - Issue #151: Support for detecting OpenSSL v1.1 - Issue #144: Clarify use of public vs private IP. It is possible to register private IP addresses in a public DNS - Clarify `--foreground` option in man page - Document minimum required versions of libite and libConfuse - Portability fixes, replace `__progname` with a small function, replace `%m` with `%s` and `strerror(errno)`. [v2.0][] - 2016-09-12 --------------------- New configuration file format, changed command line options, improved HTTPS support using GnuTLS and Open/LibreSSL. Inadyn now comes with certificate validation enabled by default. ### Changes - New configuration file format using [libConfuse][] - Radically simplified command line, a .conf file is now required - Reorganized SSL code, split `ssl.c` into `openssl.c` and `gnutls.c` - Strict HTTPS certificate validation is now default. To disable this use `strict-ssl = false` in the .conf file. - Certificate validation uses trusted CA certificates from the system with fall-backs to certain known locations. To override this default handling a `ca-trust-file = FILE` setting in `inadyn.conf` can be used to provide the path to another CA cert bundle, in PEM format. - Massive overhaul of `inadyn(8)` and `inadyn.conf(5)` man pages - Support for reading address from interface, including IPv6 addresses - Support for calling an external script to get the IP address - Support for multiple users @ same provider, idea from Valery Frolov: provider [email protected]:1 { username = ian password = secret alias = flemming.no-ip.com } provider [email protected]:2 { username = james password = bond alias = spectre.no-ip.com } - Support for ddnss.de and dynv6.com, contributed by Sven Hoefer - Support for spdyn.de, on request from Frank Röhm - Support for strato.com, contributed by Duncan Overbruck - Support for disabling IP address validation: `verify-address = false` - Refactored memory handling and privilige separation to simplify code - Refactored logging and backgrounding to simplify code - Removed old compatibility symlinks and other required GNU specific files, we now distribute and install README.md and ChangeLog.md ### Fixes - Fix issue #61: Add HTTPS certificate validation for OpenSSL/LibreSSL - Fix issue #67: Use GnuTLS native API for HTTPS - Fix DuckDNS: now requires 'www.' prefix in server URL. By Frank Aurich - Fix issue #110: Poodle `SSL_MODE_SEND_FALLBACK_SCSV` not needed - Fix issue #101: Remove support for custom pidfile - Fix issue #102: Relocate cache files `/var/run/inadyn` to `/var/cache/inadyn` - Fix issue #113: `--drop-privs` does not work - Add actual permissions check to `os_check_perms()` - Fix issue #121: Support for fully customizable update URL - Fix issue #122: Only use HTTPS connection for DNS update, not checkip - Fix issue #131: Use FreeDNS' own checkip server instead of DYN.com's - Fix issue #134: Support wildcard cert with GnuTLS backend

(pkgsrc changes) - Add (some) TEST_DEPENDS, but 'make test' not completed yet, some not yet R-packages are required (upstream changes) # callr 3.4.0 * All callr functions and background processes properly clean up temporary files now (#104). * callr now uses a more principled setup for the library path, and restores the related environment variables in the child process. This is a **breaking change** if you relied on having the library set in a `system()` subprocess of the callr subprocess (#114). * Better printing of `rlang_error`s that happened in the subprocess. * The stacking of error objects is slightly different now, as we keep the unmodified error from the subprocess in `$parent$error`. * callr now loads `.Rprofile` files from the current working directory by default. This works better with packrat, renv, and other software that relies on a local profile for initialization (#131). # callr 3.3.2 No user visible changes in this version.

Changes (from https://github.com/Parchive/par2cmdline/releases/tag/v0.8.1): BlackEagle (3): Add .DELETE_ON_ERROR to avoid corrupt files in workdir split release scripts a bit because win stuff is not build on the same machine as *nix stuff anymore bump 0.8.1 Ike Devolder (3): Merge pull request #131 from mdnahas/master Merge pull request #132 from mdnahas/library_dev Merge pull request #134 from mdnahas/long_read_write Michael Nahas (70): BUG FIX: ^= operator was returning wrong value for powers of 1 .gitignore now ignores emacs backup files FIX: typos, comments, indentation Added unit tests for 5 classes Changed all output to use parameters, rather than global variables. Set chunksize to zero, in unspecified case all commandline errors are first in par2creator::Process moved reference to commandline to top of parXrepairer removed largest file and total file size from commandline class Removed ExtraFile::FileSize method --- this slows things slightly. Convered ExtraFile to just a string. grouped commandline options by operation Added my name to list of authors added the most common usage as an example move num-of-threads setting code out of commandline added links to websites explaining CRC operations Moved NoiseLevel out of CommandLine remove duplicate code in par2cmdline.cpp Moved par1repairer into a function call Moved par2repairer into a function call Moved par2creator into a function call Moved filethreads out of commandline.h/cpp removed ExtraFile from commandline.h/cpp removed ExtraFileIterator from commandline.h/cpp Split up CommandLine::Parse soo I can move stuff in Reordered checks in commandline.cpp to match order of variable declarations Moved computation of blocksize into commandline.cpp BUG FIX: when changed nthreads, forgot to add OPENMP #ifdef around it Moved redundnacy calculation out of par2creator into commandline FEATURE: On Linux, adjusts buffer sizes to half the memory of the system commandline now treats argv aas const char * const *, for easier testing. unit tests for CommandLine.Parse(), plus bug fixes to it. Changed code to support a par2lib static library DANGEROUS: Moved ifdefs from par2cmdline.h into par2lib.h FEATURE: Created libpar2, a static library for par2. Added unit tests for diskfile BUG FIX: DiskFile::Delete() now sets 'exists' to false BUG FIX: getting physical memory now works for OSX DANGEROUS: Changed WIN32 to _WIN32 or _MSC_VER merged code for ComputeRecoveryFileCount into libpar2 Added output to tests, to see they had done something. BUG FIX - SQUASH - did not ifdef OPEN_MP around thread code TEST FIX: newline were expanding into two chars on Windows Added test for DiskFile::Create when file already exists BUG FIX: DiskFile::Create now returns error when file already exists BUG FIX: Should now implement Par2 standard for filenames Test scripts now use .exe and wine, if exe exists TEST FIX: Some tests did not return 1 on error. DANGEROUS, BUG FIX: Fixed most things found by cppcheck BUG FIX: fixed memory leak by FindFiles using std::unique_ptr FEATURE: Modified test scripts to support valgrind Changes made so that it compiles on OSX High Sierra Uncommented line for AM_PROG_AR in configure.ac; needed for Windows g++ is now forced to use C++ version 2011 Added ar-lib to .gitignore Unit tests are now run in WINE and with Valgrind BUILD FIX: Added tests/unit_tests to Makefile.am dist Added sorting to CriticalPackets, for consistent output Updated copyright information with my name Added notes on Cppcheck, Valgrind, MinGW, and WINE to ROADMAP Added information on WINEPATH variable to ROADMAP file Made all unit tests look similar and say FAILED/SUCCESS fixed typo in test BUG FIX: Version was compared against opNone. New Visual C++ project file, thanks to Anime Tosho BUG FIX: had introduced bug handling Unicode. Reverted change. Changed types to size_t to satisfy Microsoft compiler Support file I/O on blocksize greater than 4GB Merge pull request #135 from rwtodd/master Merge pull request #136 from rwtodd/master Richard Todd (4): Used _stati64() for WIN32 DiskFile::FileExists() Added par2cmdline.h to par2cmdline.cpp for DEBUG_NEW fixed 'need signed i for openmp' errors on Windows Renamed par2cmdline.h to libpar2internal.h.

@pblesi

Update ruby-airbrussh to 1.4.0. 1.4.0 (2019-10-13) New Features * Allow ConsoleFormatter context to be configurable (#131) @pblesi 1.3.4 (2019-09-15) Housekeeping * Add issues, source code URLs to gemspec metadata (#129) @mattbrictson * Add changelog_uri to metadata to easily link from rubygems.org (#128) @nickhammond 1.3.3 (2019-08-18) Bug Fixes * Fix LoadError when airbrussh is used without rake installed (#127) @mattbrictson Housekeeping * Migrate to new GitHub Actions config format (#125) @mattbrictson * Remove chandler from rake release process (#124) @mattbrictson * Set up release-drafter (#123) @mattbrictson * Eliminate double CI builds on PRs (#122) @mattbrictson 1.3.2 (2019-06-15) * #121: Gracefully handle SSH output that has invalid UTF-8 encoding instead of raising an exception - @mattbrictson

2.64.1 - March 27, 2020 ======================= - Warn when server-identity property is missing (#130) - Fix crashes in debug logs (#131) - Fix write loop in OpenSSL backend (!117)

v0.17.0: 2020-08-13 - Do not modify (clean up) search query to find more matches (4583efd) - Remove special search handling for phone numbers (a570a85) - Remove extra pruning from email, phone and postaddress subcommand (3f315f9, 1b9ce98, c704ce1) - Add query syntax for search terms (#131) - Add newline at the end of "show --format=pretty" (#256) - Add -H to select header from which add-email should read (#258) - Expand environment variables in paths in the config file (#269) - Deprecate --strict-search (the new query syntax can be used instead)

[v3.3][] - 2020-06-25 --------------------- ### Changes * Support building static library on Windows * Support for `fmemopen()` in Windows UWP applications * Support for `cfg_getopt(cfg, "sub=name|option")`, i.e., get an option from a sub-section, by Peter Rosin * Support for `CFGF_MODIFIED` flag, to detect changes to settings in memory after parsing, by Peter Rosin * Support for filtering out settings when printing, by Peter Rosin * Support for dynamic key=value sections with no pre-runtime knowledge of setting names, useful for environment variables and similar * Updated German translation, by Chris Leick ### Fixes * Fix loop-forever bug found by Christian Reitter; a .conf file containing only "=", will cause even the simplest parser to loop forever in internal function `cfg_getopt_secidx()` * Issue #113: Fail to build `strdup()` replacement * Issue #118: Fix build on Windows, missing `fmemopen()` replacement * Issue #120: Handle shell and C++ comments with no space separator * Issue #125: Drop developer debug msg `QSTR: ...` * Issue #131: Fix `CFG_PTR_CB()` regression, segfaults when, e.g., `cfg_free()` is called. Found and fixed by Peter Rosin * Issue #135: Revert `CFGF_RESET` flag if `cfg_setmulti()` family fail * Issue #137: Memory leak in `cfg_setopt()` for PTR options

4.23 2020-09-05 (rurban) - Fixup t/54_stringify change for JSON 2.09 (really use PR #169 madsen) 4.22 2020-09-04 (rurban) - Fix t/54_stringify needs JSON 2.09 for allow_unknown (PR #169 madsen) - Fix t/118_type.t for 5.6 - Fix t/96_interop.t for missing JSON::XS (GH #83 ribasushi) - Possible fix for s390x with long double, untested (GH #83) 4.21 2020-08-13 (rurban) - Fix not enough HEK memory allocation for the new canonical tied hashes feature. (GH #168) - TODO broken JSON::PP::Boolean versions 2.9x - 4.0 with threads::shared in 125_shared_boolean.t 4.20 2020-08-12 (rurban) - New feature: sort tied hashes with canonical. (GH #167) - Fix encode of threads::shared boolean (#166 Sam Bingner). This was broken with 4.00. - Fix some stringify overload cases via convert_blessed (GH #105) - Fix a compat case with JSON::XS, when convert_blessed is set, but allow_blessed not. (GH #105) - Improve blessed and stringify tests - Work on better inf/nan detection on AIX (#165 Peter Heuchert) - Fix documentation for booleans and their types (#162 by Karen Etheridge) 4.19 2020-02-06 (rurban) - Fix typed decode memory leak (#160 by Pali). 4.18 2019-12-13 (rurban) - Add new method ->type_all_string (#156 by Pali). When type_all_string is set then encode method produce stable deterministic string types in result JSON. This can be an alternative to Cpanel::JSON::XS::Type when having deterministic output is required but string JSON types are enough for any output. - Move SvGETMAGIC() from encode_av() and encode_hv() to encode_sv() (#156 by Pali) - Add Math::BigInt and Math::BigFloat as recommended dependences (#157 by Pali and Grinnz) 4.17 2019-11-04 (rurban) - Add Changes tests and fixups (see #155) 4.16 2019-11-04 (rurban) - Use Perl_strtod instead of self-made atof (via pow), to minimize differences from core string-to-float conversions. (#154). Fixes float representation regressions (in the 1e-6 to 1e-16 range) since 5.22. 4.15 2019-10-21 (rurban) - Fix more tests for nvtype long double 4.14 2019-10-15 (rurban) - Fix tests for nvtype long double (#153) - Fix PREREQ's. E.g. CentOS 7 has not Test::More anymore. (#152 by Pali) 4.13 2019-10-14 (rurban) - For JSON_TYPE_INT and JSON_TYPE_FLOAT allow to encode numeric values above 2^64 in PV slot via Math::BigInt/Float (#145, #148, #149 by Pali) - For JSON_TYPE_INT and JSON_TYPE_FLOAT encoder allow to pass Math::BigInt and Math::BigFloat objects with allow_bignum. (#147 by Pali) - Fix encoding floating point values above 2^64 in PV slot to JSON_TYPE_INT (#148, #150 by Pali) - Do not allow serializing objects when convert_blessed is not enabled. (#146 by Pali) 4.12 2019-06-11 (rurban) - Make encoder independent on Math::BigInt version (#140 by Pali) - Rethrow error from eval_sv and eval_pv() (#138, #139 by Pali), e.g. when Math::BigInt/BigFloat fails. - Fix encoding Inf and NaN from PV and NV slots to JSON_TYPE_INT (#137 by Pali) - Fix memory corruption in sv_to_ivuv() function (#136 by Pali) - Add new method ->require_types (#135 by Pali) - Fix typed json encoder conversion from scalar's PV and NV slot to JSON_TYPE_INT (#133, #134 by Pali) - Fix inconsistency with warnings in typed json encoder (#131 by Pali) - Fix Perl 5.8.0 support (#130 by Pali) - Fixed minor pod typo (#129 by sheeit) - Document invalid recursive callbacks or overloads (#128) 4.11 2019-03-26 (rurban) - Fix unicode strings with BOM corrupt ->utf8 state (#125) The BOM encoding effects only its very own decode call, not its object. 4.10 2019-03-18 (rurban) - Fix incr_text refcounts (#123) - Add incr_rest testcase (#123) - Fix encode_stringify string-overload refcnt problem (#124) "Attempt to free unreferenced scalar" with convert_blessed and overload. 4.09 2019-02-15 (rurban) - Add seperate allow_dupkeys property, in relaxed (#122) - Fixed allow_dupkeys for the XS slow path - Silence 2 -Wunused-value warnings - Fix ->unblessed_bool to produce modifiable perl structures (PR #121 by Pali)

0.60: Asciidoc: * Introduce "compat" option to parse like asciidoc or asciidoctor. Text (and Markdown): * Fix the support of nested lists (GitHub's #131). Other: * Remove the experimental C extension that was never built, distributed, tested nor modified since 2007. XML: * Provide a meaningful message when the translators butcher the <placeholder> attributes instead of truncating the file. (GitHub's #254) 0.59.1: po4a tool: * Really fix --srcdir and --destdir handling (Debian's #960892 again). Even with the previous fix, the aptitude package was still broken. Documentation: * Clarify the syntax of -o parameters (GitHub's #233). Sgml: * Sort the attributes. Without this, msgids are randomly fuzzied. (Debian's #725931 and Debian's #810988) 0.59: po4a tool: * Fix --srcdir handling (GitHub's #237 and Debian's #960892). This bug was breaking the build of several packages, including dpkg. Addendum: * New mode 'eof' to easily add at the end of the file (Debian's #960949). Documentation: * Fix many typos and glitches * Start a section about external projects using po4a Tests: * po4a: Add a test for the [po_directory] feature Overall: * Improve the displayed messages, don't translate debug messages. 0.58.1: Documentation: * Document an option of the XML parser (GitHub's #223). * Small glitches found during the translations. Tests: * Also ignore 'Project-Id-Version' when diffing PO files (GitHub's #224) * asciidoc: reactivate tablecells tests AsciiDoc: * Fix management of images in tables (Github's #226) * Tolerate underline length variations in two lines titles (Github's #212) 0.58: AsciiDoc: * Accept numbered list items beginning with any number of dots (GitHub's #210) Markdown: * Avoid translating Markdown fenced code block info string (GitHub's #194) * List Markdown fenced code block info string as text type (GitHub's #195) * Support YAML Front Matter (GitHub's #196). This requires YAML::Tiny. * Introduce options yfm_keys and yfm_skip_array to respectively specify which YAML keys should be translated, and that the array content should not be translated. * Work around a bug in YAML::Tiny that quotes numbers (GitHub's #217) * Add gettext flag "markdown-text" for relevant entries (GitHub's #208) Text: * Honor the (existing) --neverwrap option to handle every content verbatim. Texinfo: * Add the comments starting with 'TRANSLATORS:' to the po file (GitHub's #162) XHTML: * Don't fail nor warn when a closing tag is missing, that's legit in HTML. (GitHub's #179) XML and DocBook: * Allow attributes with no value (GitHub's #178). * Processing Instructions are handled as inline tags by default, but you can change them back to breaking with '-o break-pi' (GitHub's #170) Yaml: * Introduce option to skip array values. (GitHub's #187) po4a tool: * Cleanups and fixups about options' parsing (now tested and documented) _ / \ You may need to upgrage your po4a.conf if you were using /_!_\ "unwanted features" (ie, bugs) of the previous implementation. * Do not touch source dir when --destdir is provided (Debian #602387) * Pass --add-location=file to msgmerge when receiving option porefs. (requires gettext >= 0.19 -- June 2014) * Option --master-charset sets the charset of the generated POT file. * Option --master-language sets the language of the generated POT file. * Add support for addendum path in po4a_paths (Debian #823189) * Stop pretending that --porefs can control the wrapping of reference comments, as the gettext tools used internally always rewrap them. Scripts: * Rename po4aman-display-po to po4a-display-man * Rename po4apod-display-po to po4a-display-pod Core: * Use UTF-8 by default (the 20th century is over -- Debian #862460) po4a used to prefer ascii unless it proved impossible. But the underlying detection would fail, possibly for document containing UTF-8 chars composed on printable ascii chars only. * Add a --wrap-po option to control how the po file is wrapped, and chose between either nicely wrapped files that tend to produce git conflicts, or ugly files that are easy to automatically deal with. Tests: * Completely refactor most tests. They are now more reliable and the error messages are much more useful to understand the issues. * Many bugs to po4a and the core were ironed out in the process. * PO files content are now tested too (GitHub's #67) Documentation: * Various cleanups by Golubev Alexander (GitHub's #190 & #191)

Change since 1.3.1 from RELEASE_NOTES 1.4.0 2018/06/?? Add ARC support. Extensive work contributed by ValiMail. Add "DomainWhitelist" and "DomainWhitelistFile" config options. Extract client IP address for ARC reports when provided via Authentication-Results. Update SQL schema to support new reporting functionality for DKIM selectors and ARC local policy overrides (refer to the example schema.mysql file). Add experimental support for reporting of ARC local policy overrides. Add support for recording and reporting of DKIM selectors. Override a DMARC "fail" if an ARC "pass" is recorded in conjunction with an ARC policy pass. Fix bug #137: Handle base64 inside AR tokens that are values. Problem reported by Joseph Coffland. LIBOPENDMARC: Fix bug #203: Reject DMARC records that have duplicate tags in them. Reported by Dirk Stoecker. REPORTS: Feature request #146: Add option to pull input from a file. REPORTS: Fix bug #153: Suppress duplicate results from the same domain. Patch from Tomki Camp. 1.3.2 2017/03/04 Feature request #86: Change meaning of "RequiredHeaders" such that header validity is always checked, but messages are only rejected on that basis when the flag is set. Based on a patch from Andreas Schulze. Feature request #127: Log SPF results when rejecting. Requested by Patrick Wagner; patch from Andreas Schulze, follow-up patch from Juri Haberland. Feature request #138: Inculde policy and disposition information in an Authentication-Results comment. Based on a patch from Juri Haberland. Feature request #139: Include the client host name if known in failure reports. Suggested by Roland Turner; patch by Andreas Schulze. Fix bug #95: Assume IPv6 for SPF operations. Patch from Juri Haberland. Fix bug #120: Fix control logic around the SPF result. Reported by Christophe Wolfhugel; patch from Andreas Schulze. Fix bug #122: Don't skip the HELO milter phase when SPF is enabled. Reported by Christophe Wolfhugel. Fix bug #157: Fix logging of implicit authserv-ids. Reported by Andreas Schulze; patch from Juri Haberland. Fix bug #158: Log ignored connections. Patch from Andreas Schulze. Fix bug #160: Fix "SyslogFacility" handling. Patch from Juri Haberland. Fix bug #163: Use a larger buffer for the raw MAIL FROM value. Based on a patch from Andreas Schulze. Fix bug #174: Trim "!" suffixes from reporting addresses. Problem noted by Juri Haberland. Fix bug #186: When reloading the configuration file, the public suffix list was read in with the wrong comment indicator. Patch from Federico Omoto. Fix bug #194: Fix inappropriate DMARC status when "p=none" is discovered. Patch from Juri Haberland. Fix bug #195: When parsing Received-SPF, use the correct constants in the history file entries. Patch from Juri Haberland. LIBOPENDMARC: Fix bug #115: Fix type mismatch. Patch from Sebastian A. Siewior via Scott Kitterman. LIBOPENDMARC: Fix bug #121: Fix IPv6 CIDR matching in SPF code. Patch from Christophe Wolfhugel. LIBOPENDMARC: Fix bug #125: Compile time IPv6 fix. Reported by Christophe Wolfhugel. LIBOPENDMARC: Fix bug #131: Fix alignment bug. Patch from Andreas Schulze. LIBOPENDMARC: Fix bug #147: Fix stripping of whitespace from DMARC DNS records. Based on a patch from Job Noorman. LIBOPENDMARC: Fix bug #149: Apply "sp" setting, if present and applicable. Patch from Petr Novak. LIBOPENDMARC: Fix bug #154: Fix "rf" and "fo" processing logic. LIBOPENDMARC: Fix bug #156: Fix variable name. Patch by Andreas Schulze. LIBOPENDMARC: Fix bug #165: Fix logic in checking which SPF identifier was used. Patches from Marco Favero and Juri Haberland. LIBOPENDMARC: Fix bug #167: Don't return "fail" when we should return "none". Patch from Marco Favero. REPORTS: Fix bug #134: Handle SMTP errors correctly. Patch from Andreas Schulze. REPORTS: Fix bug #141: Set the HELO parameter correctly. Reported by Alan Smith; patch from Andreas Schulze. REPORTS: Fix bug #143: Fix logic in table truncation. Reported by Wayne Andersen; patch from Juri Haberland. REPORTS: Fix bug #162: Always report "sp" in aggregate reports. Patch from Juri Haberland. REPORTS: Fix bug #166: Fix report start/end time logic. Patch from Juri Haberland. REPORTS: Fix bug #188: Don't delete inputs too early in opendmarc-reports. Patch from Juri Haberland. TOOLS: Fix bug #161: "Forensic" reports were renamed "Failure" reports. Patch from Andreas Schulze. TOOLS: Fix bug #164: Handle IPv6 test addresses. Reported by Andreas Schulze; patch from Juri Haberland. DOCS: Patch #189: Replace the DMARC RFC with an HTML page referencing the relevant specs, since Debian doesn't consider RFCs to be "free". Patch from Scott Kitterman via Juri Haberland.

@tzakharko

# cli 2.2.0 * New `style_hyperlink()` function to add hyperlinks, on terminals that support them. * `cli_format_method()` now works properly in knitr, and other environments that catch message conditions (#159). * ANSI strings created by `col_*`, `bg_*` and `style_*` now also add the `character` class to the result. This fixes issues with code that expect `character` objects. * New functions to manipulate ANSI strings: `ansi_aling()`, `ansi_has_any()`, `ansi_nchar()`, `ansi_regex()`, `ansi_strip()`, `ansi_strsplit()`, `ansi_substr()`, `ansi_substring()`. # cli 2.1.0 * New `cli_vec()` function to allow easier formatting of collapsed vectors. It is now also possible to use styling to set the collapsing parameters (#129). * New `pluralize()` function to perform pluralization without generating cli output (#155). * `console_width()` works better now in RStudio, and also in terminals. * Styling of verbatim text work properly now (#147, @tzakharko). * Messages (ie. `message` conditions) coming from cli now have the `cliMessage` class, so you can easily suppress them without suppressing other messages (#156). * cli prints the output to `stderr()` now, if there is an output or message sink. This is to make interactive and non-interactive sessions consistent (#153). * Pluralization works corrently now if the last alternative is the empty string (#158). * cli now caches the result of the dark background detection in iTerm on macOS. Reload cli to delete the cache (#131). * The `is_dynamic_tty()`, `is_ansi_tty()` and `ansi_hide_cursor()` and releted functions now default to the `"auto"` stream, which is automatically selected to be either `stdout()` or `stderr()`. See the manual for details (#144). * The default theme now quotes file names, paths, email addresses if they don't start or end with an alphanumeric character or a slash. This is to make it easier to spot names that start or end with a space (#167). * `make_spinner()` clears the line properly now (@tzakharko, #164). * Semantic cli functions now automatically replace Unicode non-breaking space characters (`\u00a0`) with regular space characters, right before output. They are still used to calculate the line breaks, but not outputted (#161). * Progress bars now respect `is_dynamic_tty()` and do not output `\r` when this is false (@jimhester, #177)

Changelog: 1.75.0 New Libraries * JSON: JSON parsing, serialization, and DOM in C++11, from Vinnie Falco and Krystian Stasiowski. + Fast compilation requiring only C++11 + Easy and safe modern API with allocator support + Compile without Boost, define BOOST_JSON_STANDALONE + Optional header-only, without linking to a library * LEAF: A lightweight error-handling library for C++11, from Emil Dotchevski. + Small single-header format, no dependencies. + Designed for maximum efficiency ("happy" path and "sad" path). + No dynamic memory allocations, even with heavy payloads. + O(1) transport of arbitrary error types (independent of call stack depth). + Can be used with or without exception handling. * PFR: Basic reflection without macro or boilerplate code for user defined types, from Antony Polukhin. Updated Libraries * Asio: + Enabled support for UNIX domain sockets on Windows. + Added executor-converting construction and assignment to ip:: basic_resolver. + Added compatibility between polymorphic executors and the (deprecated) handler invocation hook. + Added the experimental::as_single completion token adapter. + Added support for MSG_NOSIGNAL on more platforms by using _POSIX_VERSION to detect whether it is supported. + Added the ability to compile using libpthread on Windows. + Added workarounds for the Intel C++ compiler. + Added more support for detecting and optimising for handlers that have no custom executor. + Reduced lock contention for timer cancellation on Windows. + Reinstated a previously removed null-pointer check, as it had a measurable impact on performance. + Fixed the executor concept to test for a const-qualified execute(). + Fixed any_executor support for builds without RTTI support. + Fixed the thread_pool unit test to work without RTTI support. + Fixed C++20 coroutines compatibility with clang on Windows. + Fixed some compatibility issues with Windows Runtime. + Fixed shadow name warnings caused by addition of asio::query. + Fixed a "logical ‘or’ of equal expressions" warning on linux. + Fixed a benign switch fallthrough warning. + Added missing push/pop_options.hpp includes. + Suppressed zero-as-null-pointer-constant warnings. + Fixed a comma-operator warning. + Updated the documentation to clarify when the select reactor is used on Windows. + Fixed potential ambiguity caused by any_executor comparisons and conversion. + Added detection of non-experimental C++20 coroutines on MSVC 19.8. + Fixed compatibility with uClibc. + Fixed strand<> adaptation of Networking TS executors when targeting older C++ versions or less conformant compilers. + Consult the Revision History for further details. * Atomic: + Implemented SSE2 and SSE4.1 versions of address lookup algorithm, which is used in the internal lock pool implementation. This may improve performance of waiting and notifying operations in heavily contended cases. + Fixed a possible compilation error on AArch64 targets caused by incorrect instructions generated for bitwise (logical) operations with immediate constants. (#41) * Beast: + This update brings bug fixes and support for the BOOST_ASIO_ENBALE_HANDLER_TRACKING compile flag from Boost.Asio: + We'd love to know how you or your company use Beast, consider adding an entry to the Companies and Individuals Using Beast list. + See the full Release Notes for a complete list of changes. * Container: + New devector container. + Fixed bugs/issues: o #152 Tree-based containers have troubles with move-only types. o #156 Compile error with vector. o PR#157 Add missing include. o #159: pmr::monotonic_buffer_resource crashes on large single allocations. o #160: Usage of uses_allocator needs a remove_cvref_t. o #162: small_vector on MSVC x86 call-by-value crash. o #161: polymorphic_allocator(memory_resource*) non-standard extension causes headache. o PR#163: container_rebind for small_vector with options. o #165: Link error with shared library and memory_resource inline members. o PR#166: Fix encoding error in copyright headers. o PR#167: error: the address of 'msg' will always evaluate as 'true' warning with GCC 4.4. o #169: flood of warnings building dlmalloc_ext_2_8_6.c on clang11. * Endian: + endian_arithmetic no longer inherits from endian_buffer + When BOOST_ENDIAN_NO_CTORS is defined, the unaligned endian_buffer and endian_arithmetic are C++03 PODs, to enable use of __attribute__(( packed)) * Filesystem: + New: Added creation_time operation, which allows to obtain file creation time. (Inspired by PR#134) + The returned value of last_write_time(p, ec) operation in case of failure has been changed to a minimal value representable by std:: time_t instead of -1. + The returned value of hard_link_count(p, ec) operation in case of failure has been changed to static_cast<uintmax_t>(-1) instead of 0. + On POSIX systems, file_size will now indicate error code errc:: function_not_supported if the path resolves to a non-regular file. Previously, errc::operation_not_permitted was reported. + On Linux, many operations now use statx system call internally, when possible, which allows to reduce the amount of information queried from the filesystem and potentially improve performance. The statx system call was introduced in Linux kernel 4.11. + Removed const-qualification from return types of some path methods. This could prevent move construction and move assignment at the call site in some cases. (#160) + On OpenBSD 4.4 and newer, use statvfs system call to obtain filesystem space information. (Inspired by PR#162) + On Windows, space now returns with an error if the provided path does not idendify an existing file. (#167) * GIL: + BREAKING: In next release, we are going to drop support for GCC 5. We may also change the required minimum C++ version from C++11 to C++14. * Histogram: + This update brings o Bug-fixes for corner-cases o Small documentation improvements o Fixes for new warnings from latest compilers and when compiling against the C++20 standard + See the full Release Notes for a complete list of changes. * Interprocess: + Fixed bugs: o #127: static assertion failure with boost interprocess 1.74 and basic_managed_shared_memory. * Intrusive: + Fixed bugs: o PR#48: MSVC "assignment within conditional" warning fix. o PR#49: Fix empty control statement warnings. o #52: Invalid casting in BOOST_INTRUSIVE_BSR_INTRINSIC. * Log: + Bug fixes: o Corrected the file counter that would be used in text_file_backend when generating the target file name (based on the pattern set by set_target_file_name_pattern method) when the log file is rotated. (#125) o Replaced a volatile version counter in basic_sink_frontend with an atomic. (#128) o In the asynchronous_sink frontend, resolved a possible conflict between flush and run methods, if run is called from a user's thread instead of the internal dedicated thread spawned by the frontend. (#131) + See changelog for more details. * Move: + Fixed bugs: o #30: (void) C-cast is a non-portable way of suppressing compiler warnings. * Mp11: + Added mp_pairwise_fold (suggested by Barry Revzin) + Removed mp_invoke (use mp_invoke_q) * Optional: + boost::none is constexpr-declared. + Fixed issue #78. * Outcome: + Announcements: o After a year and three major Boost releases announcing this upcoming change, this is the FINAL RELEASE of the v2.1 branch. From Boost 1.76 onwards, the v2.2 branch becomes the default. This branch has a number of major breaking changes to Outcome v2.1, see the documentation for details. + Enhancements: o The ADL discovered event hooks have been replaced with policy-specified event hooks instead. This is due to brittleness (where hooks would quietly self-disable if somebody changed something), compiler bugs (a difference in compiler settings causes the wrong hooks, or some but not all hooks, to get discovered), and end user difficulty in using them at all. The policy-specified event hooks can be told to default to ADL discovered hooks for backwards compatibility: set OUTCOME_ENABLE_LEGACY_SUPPORT_FOR to less than 220 to enable emulation. o Improve configuring OUTCOME_GCC6_CONCEPT_BOOL. Older GCCs had boolean based concepts syntax, whereas newer GCCs are standards conforming. However the precise logic of when to use legacy and conforming syntax was not well understood, which caused Outcome to fail to compile depending on what options you pass to GCC. The new logic always uses the legacy syntax if on GCC 8 or older, otherwise we use conforming syntax if and only if GCC is in C++ 20 mode or later. This hopefully will resolve the corner case build failures on GCC. + Bug fixes: o Boost.Outcome should now compile with BOOST_NO_EXCEPTIONS defined. Thanks to Emil, maintainer of Boost.Exception, making a change for me, Boost.Outcome should now compile with C++ exceptions globally disabled. You won't be able to use boost::exception_ptr as it can't be included if C++ exceptions are globally disabled. o #236 In the Coroutine support the final_suspend() was not noexcept, despite being required to be so in the C++ 20 standard. This has been fixed, but only if your compiler implements noop_coroutine. Additionally, if noop_coroutine is available, we use the much more efficient coroutine handle returning variant of await_suspend() which should significantly improve codegen and context switching performance. * Polygon: + C++20 fixes for event_comparison_type, vertex_equality_predicate_type, and voronoi_predicates. (Glen Fernandes) * Preprocessor: + When variadic data is empty in C++20 mode with __VA_OPT__ support the variadic size has been corrected to be 0. This also means that in this C++20 mode it is now valid to convert to and from empty arrays and lists and variadic data. The end-user can read the "C++20 Support For Variadic Macros" part of the "variadic macros" topic for more information about empty variadic data in the library. + The macro BOOST_PP_IS_STANDARD() has been added for identifying if the currently used preprocessor is a C++ standard conforming preprocessor. A number of preprocessors which generally work correctly with the library but need various internal workarounds, including the currently default VC++ preprocessor, are not considered C++ standard conforming preprocessors. However most preprocessors, including among others gcc, clang, and the new but currently non-default VC++ preprocessor in VS2019, are C++ standard conforming preprocessors. + For C++ standard conforming preprocessors a number of the limits defined in the config/limits.hpp can now be changed to higher amounts for a TU. The end-user should read the "limitations" topic to understand how and which limits can be changed. + For C++ standard conforming preprocessors, in order to allow the maximum number of FOR and WHILE iterations, the beginning 'r' and 'd' iteration numbers in the user-defined macros start at 1 and not 2, as it did in previous releases. This could be a breaking change if these iteration numbers are used in the user-defined macros ( they probably would not be ), but the change was necessary to fix some arcane bugs when dealing with numerical/logical operations with maximum numbers as well to allow the user-defined macros to be called the correct possible maximum number of times. For non-C++ conforming preprocessors, this change was not made because those non-conforming C++ preprocessors generally have limitations which disallow the maximum number of looping constructs to be run, and it was felt not to introduce a possible breaking change to those more fragile preprocessors would be better. It was also felt that besides fixing some arcane preprocessor bugs and providing the possible maximum number of user-defined macro invocations, this change could be made because it has never been documented what the starting 'r' and 'd' iteration numbers actually are but only that these numbers are incremented for each iteration. + The library has been upgraded to assume variadic macro support for any compiler working with the library. Ostensibly this means that the library is now a C++11 on up library, yet most of the major compilers, including gcc, clang, and VC++, also support variadic macros in C++98/ C++03 mode as long as strict compliance to C++98/C++03 is not turned on when using one of those compilers. * Rational: + Fix Rational operators to not break under new C++20 operator== rewriting rules. (Glen Fernandes) * Signals2: + Correct C++ allocator model support to fix compilation in C++20 standards mode. (Glen Fernandes) * System: + The platform-specific headers windows_error.hpp, linux_error.hpp, and cygwin_error.hpp emit deprecation messages and are slated for removal. + The old names for generic_category() and system_category() emit deprecation messages and are slated for removal. + error_condition::failed is deprecated and is slated for removal. operator bool() for error_condition has been reverted to its old meaning of value() != 0. This is done for compatibility with std:: error_condition as the next release is expected to improve interoperability with <system_error> even further. Note that this does not affect error_code::failed, which is still alive and well. + The overload of error_condition::message that takes a buffer is deprecated and is slated for removal, for the same reasons. Note that this does not affect error_code::message. * uBLAS: + Correct C++ allocator model support to fix compilation in C++20 standards mode. (Glen Fernandes and Conrad Poelman) * VMD: + The VMD number parsing has been upgraded to support the ability for the end-user to change the number limits in the Preprocessor library. + The macro BOOST_VMD_IS_GENERAL_IDENTIFIER has been added to support the parsing of input that represents a preprocessor token which matches the VMD identifier syntax, without having to register the identifier as a specific identifier. * Wave: + Added new C++20 tokens, including the spaceship operator <=> + Fixed bugs: o #94: fix incorrect behavior of __LINE__ and __FILE__ under rescanning 1.74.0 New Libraries * STLInterfaces: A library of CRTP bases to ease the writing of STL views, iterators, and sequence containers, from Zach Laine. Updated Libraries * Asio: + Added an implementation of the proposed standard executors (P0443r13, P1348r0, and P1393r0). + Added support for the proposed standard executors to Asio's I/O facilities. o The supplied executors now meet the requirements for the proposed standard executors. These classes also continue to meet the existing requirements for the Networking TS model of executors. o All I/O objects, asynchronous operations, and utilities will interoperate with both new proposed standard executors, and with existing Networking TS executors. o The any_io_executor type alias has been introduced as the default runtime-polymorphic executor for all I/O objects. This defaults to the execution::any_executor<> template. If required for backward compatibility, BOOST_ASIO_USE_TS_EXECUTOR_AS_DEFAULT can be defined to use the old asio::executor polymorphic wrapper instead. o Support for the existing Networking TS model of executors can be disabled by defining BOOST_ASIO_NO_TS_EXECUTORS. + Added converting move construction and assignment to basic_waitable_timer. + Enabled C++20 coroutine support when using gcc 10. + Added overloads of co_spawn that launch an awaitable. + Added a new constructor overload to use_awaitable_t's default executor adapter, to enable conversion between executor types. + Added support for using detached_t as a default completion token, by adding members as_default_on() and as_default_on_t<>. + Added a move constructor to ssl::stream<>. + Changed ssl::stream<> write operations to linearise gather-write buffer sequences. + Added compile-time detection of the deprecated asio_handler_invoke, asio_handler_allocate, and asio_handler_deallocate hooks, when BOOST_ASIO_NO_DEPRECATED is defined. + Implemented a number of performance optimisations. + Added source location support to handler tracking. + Implemented various improvements to the handlerviz.pl tool. + Added the handlerlive.pl tool, which processes handler tracking output to produce a list of "live" handlers. + Added the handlertree.pl tool, which filters handler tracking output to include only those events in the tree that produced the nominated handlers. + Added changes for clang-based Embarcadero C++ compilers. + Fixed a deadlock that can occur when multiple threads concurrently initialise the Windows I/O completion port backend. + Fixed async_compose to work with copyable handlers when passed by lvalue. + Fixed completion signature deduction in co_spawn. + Removed a spurious Executor base class from the executor_binder implementation. + Various fixes and improvements in the documentation and examples. + Consult the Revision History for further details. * Atomic: + Added missing const qualifiers to some operations in atomic_ref. + Added support for yield instruction on ARMv8-A. The instruction is used internally in spin loops to reduce CPU power consumption. + Added support for C++20 waiting and notifying operations. The implementation includes generic backend that involves the internal lock pool, as well as specialized backends for Windows, Linux, FreeBSD, DragonFly BSD and NetBSD. Atomic types provide a new method has_native_wait_notify, a static boolean constant always_has_native_wait_notify and a set of capability macros that allow to detect if the implementation supports native waiting and notifying operations for a given type. + Changed internal representation of atomic_flag to use 32-bit storage. This allows for more efficient waiting and notifying operations on atomic_flag on some platforms. + Added support for build-time configuration of the internal lock pool size. The user can define the BOOST_ATOMIC_LOCK_POOL_SIZE_LOG2 macro to specify binary logarithm of the size of the lock pool. The default value is 8, meaning that the size of the lock pool is 256, up from 64 used in the previous release. + Added support for a new set of atomic types dedicated for inter-process communication: ipc_atomic_flag, ipc_atomic and ipc_atomic_ref. Users are recommended to port their code using non-IPC types for inter-process communication to the new types. The new types provide the same set of operations as their non-IPC counterparts, with the following differences: o Most operations have an added precondition that is_lock_free returns true for the given atomic object. The library will issue a compile time error if this precondition is known to be not satisfied at compile time. o All provided operations are address-free, meaning that the atomic object (in case of ipc_atomic_ref - the referenced object) may be located in process-shared memory or mapped into the same process at multiple different addresses. o The new has_native_wait_notify operation and always_has_native_wait_notify constant indicate support for native inter-process waiting and notifying operations. When that support is not present, the operations are implemented with a busy loop, which is less efficient, but still is address-free. A separate set of capability macros is also provided to indicate this support. + Added new atomic_unsigned_lock_free and atomic_signed_lock_free types introduced in C++20. The types indicate the atomic object type for an unsigned or signed integer, respectively, that is lock-free and preferably has native support for waiting and notifying operations. + Added new gcc assembler backends for ARMv8-A (for both AArch32 and AArch64). The new backends are used to implement operations not supported by compiler intrinsics (including 128-bit operations on AArch64) and can also be used when compiler intrinsics are not available. Both little and big endian targets are supported. AArch64 backend supports extensions defined in ARMv8.1 and ARMv8.3. + Added support for big endian targets in the legacy ARM backend based on gcc assembler blocks (this backend is used on ARMv7 and older targets). Previously, the backend assumed little endian memory layout, which is significant for 64-bit operations. + Improved performance of seq_cst stores and thread fences on x86 by using lock-prefixed instructions instead of mfence. This means that the operations no longer affect non-temporal stores, which was also not guaranteed before. Use specialized instructions and intrinsics to order non-temporal memory accesses. + Fixed capability macros for 80-bit long double on x86 targets not indicating lock-free operations even if 128-bit atomic operations were available. + Fixed compilation of gcc asm blocks on Alpha targets. + In the gcc __sync* intrinsics backend, fixed that store and load operations of large objects (larger than a pointer size) could be non-atomic. The implementation currently assumes that small objects can be stored with a single instruction atomically on all modern architectures. * Beast: + This update brings bug fixes and support for the following changes changes in Boost.Asio: + Beast supports BOOST_ASIO_NO_DEPRECATED. Define this to help identify areas of your Beast and Asio code which use deprecated Asio interfaces. + Beast also supports BOOST_ASIO_NO_TS_EXECUTORS. Define this to identify uses of executors from the now potentially outdated Networking TS + Asio will use the Standard Executors model by default. You can prevent this behaviour by defining BOOST_ASIO_USE_TS_EXECUTOR_AS_DEFAULT in which the Networking TS model will be used by default. Setting this flag does not prevent a program from using executors from the Standard Executors model explicitly. + We'd love to know how you or your company use Beast, consider adding an entry to the Companies and Individuals Using Beast list. + See the full Release Notes for a complete list of changes. * Bimap: + Correct allocator usage (fixes C++20 compilation). (Glen Fernandes) * Config: + Implement BOOST_NO_CXX11_OVERRIDE and BOOST_OVERRIDE. (Glen Fernandes) * Core: + Implemented the allocator access utilities which provide a replacement for allocator_traits with individual traits and functions for each facility. They support the C++11 allocator model when possible and provide a fallback for C++98 compatibility. These are now used in Circular_Buffer, Wave, Lockfree, Heap, Smart_Ptr, Dynamic_Bitset, Format, Bimap and more. (Glen Fernandes) * DLL: + Multiple fixes for the library_info work on empty shared objects. + Compilation fixes for C++98 and C++11 modes (#28). + Fixes for smart_library manglings (thanks to XiaLiChao82 #37). * Endian: + Enabled scoped enumeration types in endian_reverse. + Enabled bool, enum, float, double in endian_reverse_inplace. + Added an overload of endian_reverse_inplace for arrays. * Filesystem: + Removed compile-time checks for support for symlinks and hardlink on Windows. Instead, a runtime check is used. (PR#142) + Fixed handling of reparse points in canonical and read_symlink on Windows. This also affects other algorithms that involve canonical and read_symlink in their implementation. (PR#100, #85, #99, #123, #125) + Fixed that read_symlink on Windows could potentially fail or cause failures elsewhere with a sharing violation error, if the same symlink was opened concurrently. (#138) + Fixed that is_symlink(directory_entry) would always return false, even if the directory entry actually referred to a symlink. (PR#148) + Added missing status inspection operation overloads for directory_entry and error_code (e.g. is_directory(directory_entry, error_code&)). Removed incorrect noexcept specifications for the overloads not taking the error_code arguments. + copy_file implementation has been updated to perform checks on the source and target files, as required by C++20 ([fs.op.copy.file]/4.1). In particular, the operation will fail if the source or target file is not a regular file or the source and target paths identify the same file. + copy_file on POSIX systems will now also copy the source file permissions to the target file, if the target file is overwritten. + New: Added copy_file implementations based on sendfile and copy_file_range system calls on Linux, which may improve file copying performance, especially on network filesystems. + Deprecated: The copy_option enumeration that is used with the copy_file operation is deprecated. As a replacement, the new enum copy_options (note the trailing 's') has been added. The new enum contains values similar to the copy_options enum from C++20. The old enum values are mapped onto the new enum. The old enum will be removed in a future release. + New: Added copy_options::skip_existing option, which allows copy_file operation to succeed without overwriting the target file, if it exists. + New: Added copy_options::update_existing option, which allows copy_file operation to conditionally overwrite the target file, if it exists, if its last write time is older than that of the replacement file. + New: copy_file now returns bool, which indicates whether the file was copied. + New, breaking change: copy operation has been extended and reworked to implement behavior specified in C++20 [fs.op.copy]. This includes support for copy_options::recursive, copy_options::copy_symlinks, copy_options::skip_symlinks, copy_options::directories_only, copy_options::create_symlinks and copy_options::create_hard_links options. The operation performs additional checks based on the specified options. Applying copy to a directory with default copy_options will now also copy files residing in that directory (but not nested directories or files in those directories). + New: Added create_directory overload taking two paths. The second path is a path to an existing directory, which is used as a source of permission attributes to use in the directory to create. + Deprecated: copy_directory operation has been deprecated in favor of the new create_directory overload. Note that the two operations have reversed order of the path arguments. + equivalent on POSIX systems now returns the actual error code from the OS if one of the paths does not resolve to a file. Previously the function would return an error code of 1. (#141) + equivalent no longer considers file size and last modification time in order to test whether the two paths refer to the same file. These checks could result in a false negative if the file was modified during the equivalent call. + New: Added absolute overloads taking error_code argument. + Operations that have current_path() as the default value of their arguments and also have an error_code argument will use the current_path(error_code& ec) overload to obtain the current path, so that its failure is reported via the error_code argument instead of an exception. + space now initializes the space_info structure members to -1 values on error, as required by C++20 ([fs.op.space]/1). + space on Windows now accepts paths referring to arbitrary files, not only directories. This is similar to POSIX systems and corresponds to the operation description in C++20. (#73) + New: Added implementation of temp_directory_path for Windows CE. (PR#25 ) + New: Improved compatibility with WASI platform. (PR#144) + New: Improved support for Embarcadero compilers. (PR#130) + New: Added implementations of unique_path operation based on getrandom (Linux), arc4random_buf (OpenBSD/FreeBSD/CloudABI) and BCrypt (Windows) system APIs. + Deprecated: Auto-linking against system libraries on Windows with MSVC-compatible compilers is deprecated and will be removed in a future release. This affects users linking against static library of Boost.Filesystem. Users are advised to update their project build systems to either use a shared library of Boost.Filesystem, or explicitly specify the dependencies of Boost.Filesystem in the linker command line. Users of shared library of Boost.Filesystem are not affected. * Flyweight: + Maintenance work. * Format: + Correct allocator usage (fixes C++20 compilation). (Glen Fernandes) * Geometry: + Improvements o PR#720 Additional R-tree constructors (thanks to Caian Benedicto). o Various improvements in buffer, set and relational operations. + Solved issues o #709 memcpy called for object with no trivial copy-assignment. o #721 Compilation error in bgi::detail::rtree::visitors::insert. o #727 MSVC warning: conditional expression is constant. + Bugfixes o PR#700 Missing cases for default strategies in distance algorithm. o PR#738 Longitudes out of range in direct geodesic formulas. * GIL: + Added o Added new constructor initializing any_image from r-value reference to any image (PR#486). o Implemented mechanism to reverse kernel_2d (PR#489). + Changed o BREAKING: Replace Boost.Variant with Boost.Variant2 (PR#474) which completes removal on uses of Boost.MPL (missing from Boost 1.72.0 change added PR#274). o Use perfect forwarding from apply_operation to visit (PR#491). + Removed o BREAKING: Removed dependency on Boost.Variant + Fixed o Fixed invalid conversion from RGB8 to CMYK32 due to overflow (PR# 470). o Fixed image constructor from other image (PR#477). o Fixed error plane_view_t is not a class or namespace name (PR#481). o Fixed interleaved_view factory using point<std::ptrdiff_t> for dimension (PR#487). o Fixed documentation replacing uses MPL with MP11 in tutorial (PR# 494). o Fixed missing header in numeric/kernel.hpp to make it self-contained (PR#502). + Acknowledgements o Samuel Debionne, Pranam Lashkari, Mateusz Loskot, Debabrata Mandal * Heap: + Correct destruction of top node in skew_heap. (Glen Fernandes) + Correct and simplify allocator use. (Glen Fernandes) * Integer: + Fixed compilation of gcd in C++20 mode with clang 10. + Improved support for Embarcadero compilers. (PR#21) * Iterator: + boost/function_output_iterator.hpp header is now deprecated. Users should replace its inclusion with boost/iterator/ function_output_iterator.hpp. (PR#51) + Improved support for Embarcadero compilers. (PR#55) * LexicalCast: + Fixed warnings on missing override (thanks to EugeneZelenko #35, #34). + Fixes for the the Embarcadero compilers (thanks to Edward Diener). * Log: + Bug fixes: o The syslog sink backend now verifies the IP version of the local and target addresses set by user. The addresses must have the same IP version as was specified in the ip_version named parameter on the sink backend construction (by default, IPv4 is assumed). When an address is obtained as a result of host name resolution, only addresses with matching IP version are considered. (#119) + New Features: o Move constructors and assignment operators of various components were marked noexcept. o Added a new range_manip stream manipulator that can be used for outputting elements of a range, optionally separated by a delimiter. o Added a new tuple_manip stream manipulator that can be used for outputting elements of a tuple or any other heterogeneous sequence, optionally separated by a delimiter. o Added a new optional_manip stream manipulator that can be used for outputting optionally present values. + See changelog for more details. * Mp11: + Improved compilation performance of mp_with_index<N> for large N. + Added tuple_transform (contributed by Hans Dembinski.) * Multi-index Containers: + Added node extraction and insertion following the analogous interface of associative containers as introduced in C++17. This feature has also been extended to non key-based indices, in contrast to C++ standard library sequence containers, which do not provide such functionality. + Clarified documentation on read/write key extractors (issue #32). + Maintenance work. * Nowide: + The library now requires a C++11-compliant compiler and stdlib + LFS: Add support for files > 2 GB where the underlying system supports it + Generic UTF conversion functions are now available in the boost::nowide ::utf namespace + Add support for stat with UTF-8 paths * Outcome: + Announcements: o The v2.1 branch is expected to be retired end of 2020, with the v2.2 branch becoming the default. You can use the future v2.2 branch now using better_optimisation. This branch has a number of major breaking changes to Outcome v2.1, see the front page for details. + Enhancements: o BREAKING CHANGE void results and outcomes no longer default construct types during explicit construction. Previously if you explicitly constructed a result<T> from a non-errored result<void>, it default constructed T. This was found to cause unhelpful surprise, so it has been disabled. o New macro OUTCOME_ENABLE_LEGACY_SUPPORT_FOR. The macro OUTCOME_ENABLE_LEGACY_SUPPORT_FOR can be used to enable aliasing of older naming and features to newer naming and features when using a newer version of Outcome. o Concepts now have snake case style naming instead of camel case style. When Outcome was first implemented, it was thought that C++ 20 concepts were going to have camel case style. This was changed before the C++ 20 release, and Outcome's concepts have been renamed similarly. This won't break any code in Outcome v2.1, as compatibility aliases are provided. However code compiled against Outcome v2.2 will need to be upgraded, unless OUTCOME_ENABLE_LEGACY_SUPPORT_FOR is set to 210 or lower. o Concepts now live in OUTCOME_V2_NAMESPACE::concepts namespace. Previously concepts lived in the convert namespace, now they live in their own namespace. o New concepts basic_result<T> and basic_outcome<T> added. End users were finding an unhelpful gap in between is_basic_result<T> and value_or_error<T> where they wanted a concept that matched types which were basic_result, but not exactly one of those. Concepts filling that gap were added. o Operation TRY works differently from Outcome v2.2 onwards. This is a severely code breaking change which change the syntax of how one uses OUTCOME_TRY(). A regular expression suitable for upgrading code can be found in the list of changes between Outcome v2.1 and v2.2. + Bug fixes: o #224 The clang Apple ships in Xcode 11.4 (currently the latest) has not been patched with the fixes to LLVM clang that fix noexcept(std ::is_constructible<T, void>) failing to compile which I originally submitted years ago. So give up waiting on Apple to fix their clang, add a workaround to Outcome. o Spare storage could not be used from within no-value policy classes. Due to an obvious brain fart when writing the code at the time, the spare storage APIs had the wrong prototype which prevented them working from within policy classes. Sorry. * PolyCollection: + Fixed internal ambiguity problem between boost::type_erasure::any and boost::any (issue #17). + Maintenance work. * SmartPtr: + Added owner_equals to shared_ptr, weak_ptr, local_shared_ptr. + Added owner_hash_value to shared_ptr, weak_ptr. + Added owner_equal_to, owner_hash. + Added std::hash specializations for shared_ptr, local_shared_ptr. + Added boost::hash support to, and std::hash, std::equal_to specializations for, weak_ptr. * Stacktrace: + Fixed a build error when compiled with -fno-exceptions (thanks to Jeremiah Rodriguez #91). * System: + operator bool() now returns failed() instead of value() != 0. * Type_Traits: + Implemented conjunction, disjunction, negation, is_trivially_copyable, is_scoped_enum, and is_unscoped_enum. (Glen Fernandes) * Variant: + Fixed warnings on missing override (thanks to EugeneZelenko #78). + Fixes for the the Embarcadero compilers (thanks to Edward Diener #79). + Updated header locations to avoid warnings about using deprecated headers (thanks to Andrey Semashev #80) * Variant2: + Added support for derived types in visit. + Improved compilation performance for many (hundreds of) alternatives. + Added support for visit<R>. * Wave: + Implement C++20 features for variadics, including __VA_OPT__ (PR#75) + Implement __has_include (PR#102) + Introduce new sample: check_macro_naming, useful with Boost itself (PR# 97) + Fix compilation issue caused by std::allocator member removal in C++20 (PR#72) + Repair Xpressive lexer and token_statistics sample (PR#79) + Repair lexertl lexer (PR#78) + Ensure hooks are run on predefined macros as well (PR#87) + Various minor bug fixes + C++98/03 support is now deprecated and will be removed in 1.77 * YAP: + Fixed compilation errors for placeholders; they now work in the general case, and in particular work with yap::print(). + constexpr all the YAP. + Fix printing of correct value category in yap::print(). + Doc clarification. Updated Tools * Boostbook: + Change encoding of generated documentation from US-ASCII to UTF-8. (Glen Fernandes)

Snowball 2.1.0 (2021-01-21) =========================== C/C++ ----- * Fix decoding of 4-byte UTF-8 sequences in `grouping` checks. This bug affected Unicode codepoints U+40000 to U+7FFFF and U+C0000 to U+FFFFF and doesn't affect any of the stemming algorithms we currently ship (#138, reported by Stephane Carrez). Python ------ * Fix snowballstemmer.algorithms() method (#132, reported by kkaiser). * Update code to generate trove language classifiers for PyPI. All the natural languages we previously had stemmers for have now been added to PyPI's list, but Armenian and Yiddish aren't on it. Patch from Dmitry Shachnev. Java ---- Code Quality Improvements ------------------------- * Suppress GCC warning in compiler code. * Use `const` pointers more in C runtime. * Only use spaces for indentation in javascript code. Change proposed by Emily Marigold Klassen in #123, and seems to be the modern Javascript norm. New Code Generators ------------------- * Add Ada generator from Stephane Carrez (#135). New Snowball Language Features ------------------------------ * `lenof` and `sizeof` can now be applied to a literal string, which can be useful if you want to do calculations on cursor values. This change actually simplifies the language a little, since you can now use a literal string in any read-only context which accepts a string variable. Code generation improvements ---------------------------- * General: + Fix bugs in the code generated to handle failure of `goto`, `gopast` or `try` inside `setlimit` or string-`$`. This affected all languages (though the issue with `try` wasn't present for C). These bugs don't affect any of the stemming algorithms we currently ship. Reported by Stefan Petkovic on snowball-discuss. + Change `hop` with a negative argument to work as documented. The manual says a negative argument to hop will raise signal f, but the implementation for all languages was actually to move the cursor in the opposite direction to `hop` with a positive argument. The implemented behaviour is problematic as it allows invalidating implicitly saved cursor values by modifying the string outside the current region, so we've decided it's best to fix the implementation to match the documentation. The only Snowball code we're aware of which relies on this was the original version of the new Yiddish stemming algorithm, which has been updated not to rely on this. The compiler now issues a warning for `hop` with a constant negative argument (internally now converted to `false`), and for `hop` with a constant zero argument (internally now converted to `true`). + Canonicalise `among` actions equivalent to `()` such as `(true)` which previously resulted in an extra case in the among, and for Python we'd generate invalid Python code (`if` or `elif` with an empty body). Bug revealed by Assaf Urieli's Yiddish stemmer in #137. + Eliminate variables whose values are never used - they no longer have corresponding member variables, etc, and no code is generated for any assignments to them. + Don't generate anything for an unused `grouping`. + Stop warning "grouping X defined but not used" for a `grouping` which is only used to define other another `grouping`. * C/C++: + Store booleans in same array as integers. This means each boolean is stored as an int instead of an unsigned char which means 4 bytes instead of 1, but we save a pointer (4 or 8 bytes) in struct SN_env which is a win for all the current stemmers. For an algorithm which uses both integers and booleans, we also save the overhead of allocating a block on the heap, and potentially improve data locality. + Eliminate duplicate generated C comment for sliceto. * Pascal: + Avoid generating unused variables. The Pascal code generated for the stemmers we ship is now warning free (tested with fpc 3.2.0). * Python: + End `if`-chain with `else` where possible, avoiding a redundant test of the variable being switched on. This optimisation kicks in for an `among` where all cases have commands. This change seems to speed up `make check_python_arabic` by a few percent. New stemming algorithms ----------------------- * Add Serbian stemmer from stef4np (#113). * Add Yiddish stemmer from Assaf Urieli (#137). * Add Armenian stemmer from Astghik Mkrtchyan. It's been on the website for over a decade, and included in Xapian for over 9 years without any negative feedback. Behavioural changes to existing algorithms ------------------------------------------ Optimisations to existing algorithms ------------------------------------ * kraaij_pohlmann: Use `$v = limit` instead of `do (tolimit setmark v)` since this generates simpler code, and also matches the code other algorithm implementations use. Probably for languages like C with optimising compilers the compiler will generate equivalent code anyway, but e.g. for Python this should be an improvement. Code clarity improvements to existing algorithms ------------------------------------------------ * hindi.sbl: Fix comment typo. Compiler -------- * Don't count `$x = x + 1` as initialising or using `x`, so it's now handled like `$x += 1` already is. * Comments are now only included in the generated code if command like option -comments is specified. The comments in the generated code are useful if you're trying to debug the compiler, and perhaps also if you are trying to debug your Snowball code, but for everyone else they just bloat the code which as the number of languages we support grows becomes more of an issue. * `-parentclassname` is not only for java and csharp so don't disable it if those backends are disabled. * `-syntax` now reports the value for each numeric literal. * Report location for excessive get nesting error. * Internally the compiler now represents negated literal numbers as a simple `c_number` rather than `c_neg` applied to a `c_number` with a positive value. This simplifies optimisations that want to check for a constant numeric expression. Build system ------------ * Link binaries with LDFLAGS if it's set, which is needed for some platform (e.g. OpenEmbedded). Patch from Andreas Müller (#120). * Add missing dependencies of algorithms.go rule. Testsuite --------- * C: Add stemtest for low-level regression tests. Documentation ------------- * Document a C99 compiler as a requirement for building the snowball compiler (but the C code it generates should still work with any ISO C compiler.) A few declarations mixed with code crept in some time ago (which nobody's complained about), so this is really just formally documenting a requirement which already existed. * README: Explain what Snowball is and what Stemming is (#131, reported by Sean Kelly). * CONTRIBUTING.rst: Expand section on adding a new generator. * For Python snowballstemmer module include global NEWS instead of Python-specific CHANGES.rst and use README.rst as the long description. Patch from Dmitry Shachnev (#119). * COPYING: Update and incorporate Python backend licensing information which was previously in a separate file.

* Fix #121: the -i flag produces an .info file even if the %expect pragma is violated * Fix #131: qualify uses of Prelude functions in generated code * Fix #161: drop fewer parse items when generating an .info file * Introduce the %shift directive to resolve shift/reduce conflicts explicitly, useful in conjunction with %expect 0 * Remove the deprecated build configuration flag 'small_base'

@haozhu233

htmltools 0.5.1.1 -------------------------------------------------------------------------------- * Added shiny as a suggested package. htmltools 0.5.1 -------------------------------------------------------------------------------- ## New Features & Improvements * Added a new `tagFunction()` for generating `tags` and/or `htmlDependency()`s conditional on the rendering context. For an example, see `?tagFunction`. (#180) * Closed #104: `save_html()`'s `file` argument now properly handles relative paths. (@haozhu233, #105, #192) * `save_html()` now has a `lang` parameter that can be used to set the lang attribute of `<html>`. (@ColinFay, #185) * Closed #101: `htmlDependency` & `renderDependencies` now allow the `script` argument to be given as a named list containing the elements: `src`, `integrity`, `crossorigin`. (@matthewstrasiotto, #188) * Closed #189: `validateCssUnit()` now accepts `fit-content`. (#190) * `htmlPreserve()` can now optionally use the Pandoc `raw_attribute` extension to enclose HTML. ## Breaking Changes * Closed #161: `parseCssColors(x)` now requires `x` to be a character vector (it no longer accepts a `list()` of strings) and an error is no longer thrown when `mustWork = FALSE` and `x` contains `NA` value(s). (#194) ## Bug fixes * `print(as.tags(x))` no longer results in error when `x` is a generic `list()` of tag-like objects. (#181) htmltools 0.5.0 -------------------------------------------------------------------------------- * `tags` is now generated by a script which collects all [HTML](https://developer.mozilla.org/en-US/docs/Web/HTML/Element) and [SVG](https://developer.mozilla.org/en-US/docs/Web/SVG/Element) element tags documented in [MDN Web Docs](https://developer.mozilla.org). This feature only appends to the existing set of `tags` (#159) * Removed the Rcpp depedency and the compiled code now uses C rather than C++ (#158) * BREAKING CHANGE: Fixed #57, #153: `htmlTemplate` output no longer inserts extra whitespace around {{...}} replacement values. (#154) * `HTML()` now takes `.noWS` argument, which can be used to suppress surrounding whitespace (similar to the new argument for tags in htmltools 0.4.0). (#154) * `css()` now returns `NULL` instead of `""` when no non-empty properties are specified. (#145) * `save_html(tags$body(...))` no longer results in double <body> tags being written to the .html file. (Note that `save_html(tags$html(...))` is not supported at this time.) (#145) * Trailing commas now permited in `...` arguments to `css()`, `tagList()`, and the var-arg mutation functions: `tagAppendAttributes()`, `tagSetChildren()`, and `tagAppendChildren()`. (#145) * Added `capturePlot` and `plotTag` functions, for easily creating image files and HTML <img> tags (respectively) from plot expressions. (#150) * Added `parseCssColors` function, for normalizing the various CSS color formats into #RRGGBB(AA) strings. (#155) * Fixed #156: Now `extractPreserveChunks()` handles strings contain Emoji Unicode strings correctly on Windows. (#157) * The `.noWS` parameter for suppressing whitespace can now take an `"inside"` value (equivalent to `c("after-start", "before-end")`). (#163) htmltools 0.4.0 -------------------------------------------------------------------------------- * Fixed #128: Added support for trailing commas in tagLists and the predefined tags. (#135) * Added some HTML tag functions to `tags` that were missing. (#111) * Updated RcppExports for new version of Rcpp. (#93) * `as.character.shiny.tags()` will handle non-ASCII attributes correctly if they are not encoded in native encoding. * Fixed #99: `NA` attributes were sometimes rendered as `"NA"` in the HTML, instead of being blank. (#100) * The error message for trailing commas in tag functions now provides context and useful information. (#109) * Stopped using inline styles to set background color for `save_html`, as doing so makes it difficult to override using other CSS rules. (#123) * Added a `.noWS` argument to `tag()` and `tags` which can be used to suppress the automatically generated whitespace around a particular tag. (#131) * Added a shim for `system.file()` so that htmltools works with `htmlDependency` objects created by a package that was loaded with `devtools::load_all()`. (#129) * `validateCssUnit()` now accepts `ch`, `rem`, and `calc()`. (#134) * Fixed #125: `print.html` removes html dependencies. (#126) * Stopped extra carriage returns from being inserted by `save_html` on Windows. (#137)

v4.10.1 ======= * #361: Avoid potential REDoS in ``EntryPoint.pattern``. v4.10.0 ======= * #354: Removed ``Distribution._local`` factory. This functionality was created as a demonstration of the possible implementation. Now, the `pep517 <https://pypi.org/project/pep517>`_ package provides this functionality directly through `pep517.meta.load <https://github.com/pypa/pep517/blob/a942316305395f8f757f210e2b16f738af73f8b8/pep517/meta.py#L63-L73>`_. v4.9.0 ====== * Require Python 3.7 or later. v4.8.3 ====== * #357: Fixed requirement generation from egg-info when a URL requirement is given. v4.8.2 ====== v2.1.2 ====== * #353: Fixed discovery of distributions when path is empty. v4.8.1 ====== * #348: Restored support for ``EntryPoint`` access by item, deprecating support in the process. Users are advised to use direct member access instead of item-based access:: - ep[0] -> ep.name - ep[1] -> ep.value - ep[2] -> ep.group - ep[:] -> ep.name, ep.value, ep.group v4.8.0 ====== * #337: Rewrote ``EntryPoint`` as a simple class, still immutable and still with the attributes, but without any expectation for ``namedtuple`` functionality such as ``_asdict``. v4.7.1 ====== * #344: Fixed regression in ``packages_distributions`` when neither top-level.txt nor a files manifest is present. v4.7.0 ====== * #330: In ``packages_distributions``, now infer top-level names from ``.files()`` when a ``top-level.txt`` (Setuptools-specific metadata) is not present. v4.6.4 ====== * #334: Correct ``SimplePath`` protocol to match ``pathlib`` protocol for ``__truediv__``. v4.6.3 ====== * Moved workaround for #327 to ``_compat`` module. v4.6.2 ====== * bpo-44784: Avoid errors in test suite when DeprecationWarnings are treated as errors. v4.6.1 ====== * #327: Deprecation warnings now honor call stack variance on PyPy. v4.6.0 ====== * #326: Performance tests now rely on `pytest-perf <https://pypi.org/project/pytest-perf>`_. To disable these tests, which require network access and a git checkout, pass ``-p no:perf`` to pytest. v4.5.0 ====== * #319: Remove ``SelectableGroups`` deprecation exception for flake8. v4.4.0 ====== * #300: Restore compatibility in the result from ``Distribution.entry_points`` (``EntryPoints``) to honor expectations in older implementations and issuing deprecation warnings for these cases: - ``EntryPoints`` objects are once again mutable, allowing for ``sort()`` and other list-based mutation operations. Avoid deprecation warnings by casting to a mutable sequence (e.g. ``list(dist.entry_points).sort()``). - ``EntryPoints`` results once again allow for access by index. To avoid deprecation warnings, cast the result to a Sequence first (e.g. ``tuple(dist.entry_points)[0]``). v4.3.1 ====== * #320: Fix issue where normalized name for eggs was incorrectly solicited, leading to metadata being unavailable for eggs. v4.3.0 ====== * #317: De-duplication of distributions no longer requires loading the full metadata for ``PathDistribution`` objects, entry point loading performance by ~10x. v4.2.0 ====== * Prefer f-strings to ``.format`` calls. v4.1.0 ====== * #312: Add support for metadata 2.2 (``Dynamic`` field). * #315: Add ``SimplePath`` protocol for interface clarity in ``PathDistribution``. v4.0.1 ====== * #306: Clearer guidance about compatibility in readme. v4.0.0 ====== * #304: ``PackageMetadata`` as returned by ``metadata()`` and ``Distribution.metadata()`` now provides normalized metadata honoring PEP 566: - If a long description is provided in the payload of the RFC 822 value, it can be retrieved as the ``Description`` field. - Any multi-line values in the metadata will be returned as such. - For any multi-line values, line continuation characters are removed. This backward-incompatible change means that any projects relying on the RFC 822 line continuation characters being present must be tolerant to them having been removed. - Add a ``json`` property that provides the metadata converted to a JSON-compatible form per PEP 566. v3.10.1 ======= * Minor tweaks from CPython. v3.10.0 ======= * #295: Internal refactoring to unify section parsing logic. v3.9.1 ====== * #296: Exclude 'prepare' package. * #297: Fix ValueError when entry points contains comments. v3.9.0 ====== * Use of Mapping (dict) interfaces on ``SelectableGroups`` is now flagged as deprecated. Instead, users are advised to use the select interface for future compatibility. Suppress the warning with this filter: ``ignore:SelectableGroups dict interface``. Or with this invocation in the Python environment: ``warnings.filterwarnings('ignore', 'SelectableGroups dict interface')``. Preferably, switch to the ``select`` interface introduced in 3.7.0. See the `entry points documentation <https://importlib-metadata.readthedocs.io/en/latest/using.html#entry-points>`_ and changelog for the 3.6 release below for more detail. For some use-cases, especially those that rely on ``importlib.metadata`` in Python 3.8 and 3.9 or those relying on older ``importlib_metadata`` (especially on Python 3.5 and earlier), `backports.entry_points_selectable <https://pypi.org/project/backports.entry_points_selectable>`_ was created to ease the transition. Please have a look at that project if simply relying on importlib_metadata 3.6+ is not straightforward. Background in #298. * #283: Entry point parsing no longer relies on ConfigParser and instead uses a custom, one-pass parser to load the config, resulting in a ~20% performance improvement when loading entry points. v3.8.2 ====== * #293: Re-enabled lazy evaluation of path lookup through a FreezableDefaultDict. v3.8.1 ====== * #293: Workaround for error in distribution search. v3.8.0 ====== * #290: Add mtime-based caching for ``FastPath`` and its lookups, dramatically increasing performance for repeated distribution lookups. v3.7.3 ====== * Docs enhancements and cleanup following review in `GH-24782 <https://github.com/python/cpython/pull/24782>`_. v3.7.2 ====== * Cleaned up cruft in entry_points docstring. v3.7.1 ====== * Internal refactoring to facilitate ``entry_points() -> dict`` deprecation. v3.7.0 ====== * #131: Added ``packages_distributions`` to conveniently resolve a top-level package or module to its distribution(s). v3.6.0 ====== * #284: Introduces new ``EntryPoints`` object, a tuple of ``EntryPoint`` objects but with convenience properties for selecting and inspecting the results: - ``.select()`` accepts ``group`` or ``name`` keyword parameters and returns a new ``EntryPoints`` tuple with only those that match the selection. - ``.groups`` property presents all of the group names. - ``.names`` property presents the names of the entry points. - Item access (e.g. ``eps[name]``) retrieves a single entry point by name. ``entry_points`` now accepts "selection parameters", same as ``EntryPoint.select()``. ``entry_points()`` now provides a future-compatible ``SelectableGroups`` object that supplies the above interface (except item access) but remains a dict for compatibility. In the future, ``entry_points()`` will return an ``EntryPoints`` object for all entry points. If passing selection parameters to ``entry_points``, the future behavior is invoked and an ``EntryPoints`` is the result. * #284: Construction of entry points using ``dict([EntryPoint, ...])`` is now deprecated and raises an appropriate DeprecationWarning and will be removed in a future version. * #300: ``Distribution.entry_points`` now presents as an ``EntryPoints`` object and access by index is no longer allowed. If access by index is required, cast to a sequence first. v3.5.0 ====== * #280: ``entry_points`` now only returns entry points for unique distributions (by name). v3.4.0 ====== * #10: Project now declares itself as being typed. * #272: Additional performance enhancements to distribution discovery. * #111: For PyPA projects, add test ensuring that ``MetadataPathFinder._search_paths`` honors the needed interface. Method is still private. v3.3.0 ====== * #265: ``EntryPoint`` objects now expose a ``.dist`` object referencing the ``Distribution`` when constructed from a Distribution. v3.2.0 ====== * The object returned by ``metadata()`` now has a formally-defined protocol called ``PackageMetadata`` with declared support for the ``.get_all()`` method. Fixes #126. v3.1.1 ====== v2.1.1 ====== * #261: Restored compatibility for package discovery for metadata without version in the name and for legacy eggs. v3.1.0 ====== * Merge with 2.1.0. v2.1.0 ====== * #253: When querying for package metadata, the lookup now honors `package normalization rules <https://packaging.python.org/specifications/recording-installed-packages/>`_. v3.0.0 ====== * Require Python 3.6 or later.

@Agnishom

0.12.2 * Parser: handle context shift to external context, e.g., BashOneLine##Bash. Closes #139 (issue with Dockerfile). * Update xml files from upstream: bash, cmake, markdown, objectivecpp, php, sql-postgresql, sql, stan, zshr * Fix formatting in Color doc-comment (Janek Spaderna). * Add stan.xml (Brian Ward). 0.12.1 * Update syntax definitions: bash, cmake, dockerfile, gnuassembler, markdown, spdx-comments. * Support hex escapes using \x in regex char classes (#135). These occur in a number of syntax definitions and weren't correctly interpreted before. Thanks to @Agnishom. * Support regex property syntax, e.g. \p{Lu}. * Regex: support \B (non-word-boundary). 0.12 * Properly handle include elements in keyword lists (#124). A number of syntaxes (e.g. typescript, scala) include keyword lists from other syntaxe,s and previously we weren't able to handle this. * There are several pieces to this change. We need to store lists where other Syntaxes can look them up, so we add an sLists field to Syntax [API change], and modify the parser to fill this. We change lists so that their values are not just a Text, but a ListItem that can either be a textual value or an include directive, specifying a ListName (syntax name and list name). * The Keyword constructor for Matcher now takes, instead of a WordSet, Either a ListName or a WordSet (API change). * Skylighting.Parser now exports resolveKeywords (API change), which modifies all Keyword matchers in a syntax so that Left values with a ListName become Right values with resolved WordSets. The tokenizer applies this function automatically to the SyntaxMap given in Config. But it is more efficient to do this conversion just once, rather than every time tokenize is called. So we have loadSyntaxesFromDir call it on the SyntaxMap. With this optimization, there is not an appreciable performance cost to the changes described above. * Skylighting.Regex: Fix bug with regexes like a{10}b (#133). This requires exactly 10 a's; previously we interpreted it as "at least 10." * skylighting-extract: take a directory as argument rather than files. This allows us to use loadSyntaxesFromDir. * Update xml syntax definitions from upstream: julia, cmake, cpp, isocpp, markdown, python, toml. 0.11 * Skylighting.Regex: Support regex subroutines (#118). For example, (?1) is replaced by the regex in the first capturing group. So far we only support this simple, absolute form, not the relative form (?-1) supported by some engines (but not used, I think, in KDE's syntax highlighters). This change involves an API change: Regex in Skylighting.Regex has a new Subroutine constructor, and the Recurse constructor has been removed. Instead of Recurse we use Subroutine 0, which unifies the code. * Skylighting.Regex: handle e.g. [\1] and [\123] (without initial 0) as octal escapes (#118). These occur in the zsh.xml syntax definition. * Pull xml definitions for bash, cmake, python, zsh from upstream. * README: Add a note about pulling syntax definitions from upstream (#138). Update build instructions for recent cabal versions (#131). 0.10.5.2 * Added swift grammar definition (Igor Ranieri). * Simplify README.md instructions for two-step build. * Fix link to KDE documentation.

@Agnishom

0.12.2 * Parser: handle context shift to external context, e.g., BashOneLine##Bash. Closes #139 (issue with Dockerfile). * Update xml files from upstream: bash, cmake, markdown, objectivecpp, php, sql-postgresql, sql, stan, zshr * Fix formatting in Color doc-comment (Janek Spaderna). * Add stan.xml (Brian Ward). 0.12.1 * Update syntax definitions: bash, cmake, dockerfile, gnuassembler, markdown, spdx-comments. * Support hex escapes using \x in regex char classes (#135). These occur in a number of syntax definitions and weren't correctly interpreted before. Thanks to @Agnishom. * Support regex property syntax, e.g. \p{Lu}. * Regex: support \B (non-word-boundary). 0.12 * Properly handle include elements in keyword lists (#124). A number of syntaxes (e.g. typescript, scala) include keyword lists from other syntaxe,s and previously we weren't able to handle this. * There are several pieces to this change. We need to store lists where other Syntaxes can look them up, so we add an sLists field to Syntax [API change], and modify the parser to fill this. We change lists so that their values are not just a Text, but a ListItem that can either be a textual value or an include directive, specifying a ListName (syntax name and list name). * The Keyword constructor for Matcher now takes, instead of a WordSet, Either a ListName or a WordSet (API change). * Skylighting.Parser now exports resolveKeywords (API change), which modifies all Keyword matchers in a syntax so that Left values with a ListName become Right values with resolved WordSets. The tokenizer applies this function automatically to the SyntaxMap given in Config. But it is more efficient to do this conversion just once, rather than every time tokenize is called. So we have loadSyntaxesFromDir call it on the SyntaxMap. With this optimization, there is not an appreciable performance cost to the changes described above. * Skylighting.Regex: Fix bug with regexes like a{10}b (#133). This requires exactly 10 a's; previously we interpreted it as "at least 10." * skylighting-extract: take a directory as argument rather than files. This allows us to use loadSyntaxesFromDir. * Update xml syntax definitions from upstream: julia, cmake, cpp, isocpp, markdown, python, toml. 0.11 * Skylighting.Regex: Support regex subroutines (#118). For example, (?1) is replaced by the regex in the first capturing group. So far we only support this simple, absolute form, not the relative form (?-1) supported by some engines (but not used, I think, in KDE's syntax highlighters). This change involves an API change: Regex in Skylighting.Regex has a new Subroutine constructor, and the Recurse constructor has been removed. Instead of Recurse we use Subroutine 0, which unifies the code. * Skylighting.Regex: handle e.g. [\1] and [\123] (without initial 0) as octal escapes (#118). These occur in the zsh.xml syntax definition. * Pull xml definitions for bash, cmake, python, zsh from upstream. * README: Add a note about pulling syntax definitions from upstream (#138). Update build instructions for recent cabal versions (#131). 0.10.5.2 * Added swift grammar definition (Igor Ranieri). * Simplify README.md instructions for two-step build. * Fix link to KDE documentation.

0.0.29 ---------------------------------------------- - Do not treat `--trusted-host` as a requirement (#136) 0.0.28 ---------------------------------------------- - Expose whether a requirement is editable (#131)

Upstream changes: 1.57 2022-03-03 - The last release would die if Sub::Util was not available, but this should just be an optional requirement. Fixed by Paul Howarth. GH #131. - This is the second time I've introduced this bug, so now there's a test to make sure that DateTime can be loaded if Sub::Util is not installed. Hopefully this will prevent a third occurrence of this bug. 1.56 2022-03-02 - The DateTime->from_epoch constructor now accepts a single, non-hashref argument, and validates it as an epoch value. Requested by Neil Bowers. GH #119.

@brodieG

Upstream changes: 1.5.1 crayon now does not fail to install from source if the utils package is not loaded (#133). 1.5.0 You can use the new cli.default_num_colors option to set the default number of ANSI colors, only if ANSI support is otherwise detected. See the details in the manual of num_ansi_colors(). (From cli.) crayon now install cleanly on R 3.4.x and R 3.5.x on Windows (#131). 1.4.2 Better ANSI support detection if there is an active sink(). Support ANSI markup in RStudio jobs. 1.4.1 ANSI color support detection works correctly now in older RStudio (#112). ANSI color support detection works correctly now on older R versions (#109). 1.4.0 Overhauled and much improved detection of ANSI color support and number of ANSI colors. NO_COLOR environment variable disables color (#64) Now colors are turned on if ANSICON (https://github.com/adoxa/ansicon) is active. New hyperlink() function to add hyperlinks to terminal output. The new has_hyperlink() function tests if the current stdout() supports this. reset style now restores previous style for text following it (@brodieG, #35). Warnings are no longer generated when the INSIDE_EMACS environment variable is set but does not include a version number.

0.3.1 - 2022-05-09 Fixed -Local Ipv4 discovery fails on some platforms (#133, #142) 0.3.0 - 2022-05-08 Added -Added ability for icmp tracing to multiple targets simultaneously in Tui (#72) -Added ability to enable and disable the AS lookup from the Tui (#126) -Added ability to switch between hop address display modes (ip, hostname or both) in thr Tui (#124) -Added ability to expand and collapse the number of hosts displays per hop in the Tui (#124) -Added the -s (--tui-max-samples) flag to specify the number of samples to keep for analysis and display (#110) -Added ability to flush the DNS cache from the Tui (#71) Changed -Simplified Tracer by removing circular buffer (#106) -Added round end reason indicator to Tracer (#88) -SHow better error message for failed DNS resolution (#119) Fixed -Tracing with udp protocol not showing the target hop due to incorrect handling of DestinationUnreachable responses (#131) -Tui failing on shutdown on Windows due to DisableMouseCapture being invoked without a prior EnableMouseCapture call (#116) -Build failing on Windows due to incorrect conditional compilation configuration (#113) -Tracing not publishing all Probe in a round when the round ends without finding the target (#103) -Tracing with tcp protocol not working as the checksum was not set (#79) -Do not show FQDN for reverse DNS queries from non-system resolvers (#120)

2.2.0 (2022-02-28) Minor Enhancements * Support sass-embedded as alternative implementation (#124) Bug Fixes * Source map sources should to be relative to site.source (#119) * Sourcemaps should not be rendered by Liquid (#123) Development Fixes * Migrate from AppVeyor CI to GH Actions (#125) * Refactor specs to reduce repetition (#126) * Reduce overall class size (#132) * Use new sass-embedded api (#131) * Add workflow to release gem via GH Actions (#134) Documentation * Update CI status badge (#127) * Update sass-embedded info in README.md (#133)

1.12.0 (2022-09-16) * Improve exception message for missing value #131 * :rule_set_exceptions option added #132

0.9.1 (2022-10-24) * Fix Slim's error in AttributeMerger due to 0.9.0's :capture_generator (#137) * Use specified :capture_generator for nested captures (#112) * Fix Temple::ERB::Engine's <%= to not escape and <%== to escape expressions 0.9.0 (2022-10-24) * Require Ruby 2.5+ (#131) * Change default :capture_generator to self (#113) * Improve compatibility with Rails 7.1 (#135) * Support Rails 6.1's annotate_rendered_view_with_filenames with Temple::Filters::Ambles (#134) * Fix a crash in StringSplitter filter (#138) * Fix a warning by Object#=~ since Ruby 2.6 (#129) * Fix deprecated Tilt template mime type (#108) * Stop using deprecated EscapeUtils from Temple::Utils (#136)

What's Changed - Queue feature improvements in #130 - Add more navigation commands in #131 - Add various UI improvements by in #132 - Fix playback window's position when rendering the application's UI in #133 - Add sixel support in #134 - Add desktop notification support in #137

@francisbarton

# ps 1.7.5 # ps 1.7.4 * `ps::ps_get_cpu_affinity()` now works for other processes on Linux, not only the calling process. # ps 1.7.3 * The output of `ps_disk_usage()`, `ps_disk_partitions()` and `ps_shared_lib_users()` now do not include a spurious `stringsAsFactors` column. # ps 1.7.2 * `ps_system_memory()$percent` now returns a number scaled between 0 and 100 on Windows, rather than between 0 and 1 (#131, @francisbarton). # ps 1.7.1 * ps now returns data frames instead of tibbles. While data frames and tibbles are very similar, they are not completely compatible. To convert the output of ps to tibbles call the `tibble::as_tibble()` function on them. * `ps()` now does not fail if both `user` and `after` are specified (#129). # ps 1.7.0 * ps now compiles on platforms that enable OpenMP (#109). * New functions `ps_get_cpu_affinity()` and `ps_set_cpu_affinity()` to query and set CPU affinity (#123). * `ps_memory_info()` now does not mix up `rss` and `vms` on Linux. * `ps_memory_info()` now reports memory in bytes instead of pages on Linux (#115)

Wrappers 1.4.4 | Solver 1.4.2 | 15/07/2022 ------------------------------------------ - fix timing in shared data release procedure PR #149 - revert use of nullpointer introduced in #142 Its use is not necessary anymore in 3.11.0-beta.4 and used to cause issues on some platforms (see #144 ) PR #145 Wrappers 1.4.3 | Solver 1.4.1 | 13/06/2022 ------------------------------------------ - add support for Python 3.11 PR #142 - do not install tests PR #143 - fix packaging for latest setuptools PR #140 Wrappers 1.4.2 | Solver 1.4.1 | 28/03/2022 ------------------------------------------ - fix an issue with setuptools configuration PR #134 Wrappers 1.4.1 | Solver 1.4.1 | 27/03/2022 ------------------------------------------ - add missing include PR #129 - re-organize the Python binding sources to properly ship type hints PR #131 Wrappers 1.4.0 | Solver 1.4.0 | 14/03/2022 ------------------------------------------ - make installation PEP517 compliant PR #125 - add type hints PR #125 - add Constraint::violated() method PR #128 - make the the c++ part of the code c++20 compliant PR #120 - test with c++11 and c++20 PR #120

Features/Improvements ✨ - Append suffix to download filenames to avoid overwrites (#35) - Support uploading image attachments from clipboard (#36) - Support leaving rooms (#45) - Support hiding server part of username in message scrollback (#71) - Restore opened tabs and windows upon restart (#72) - Interpret newlines as line breaks when converting Markdown to HTML (#74) - Indicate when you're editing a message (#75) - Support configuring which program :open runs (#95) - Support sending and completing Emoji shortcodes in the message bar (#100) - Indicate number of members in room (#110) - Show errors fetching space hierarchy when list is empty (#113) - Show Git SHA information when printing version information (#120) - Reduce number of Tokio workers (#129) - Indicate when there are new messages below scrollback viewport (#131) Bug Fixes 🐞 - Tab completion panics for unrecognized commands (#81) - Fix error message for undefined download directory (#87) - Gracefully handle verification events that are unknown locally (#90) - Use terminal window focus to determine when a message has actually been seen (#94) - ChatStore::set_receipts locks up app for bad connections (#99) - Need fallback behaviour when dirs::download_dir returns None (#118) - Code blocks get rendered without line breaks (#122) - Remove trailing newlines in body (#125) - Profile session token should only be readable by the user (#130) - Handle sync failure after successful password entry (#133) Documentation/README Updates 📚 - Add manual pages (#88) - Mention Minimum Supported Rust Version in README (#115) - Link to AUR pkg in README (#121) Meta 👷‍♀️ - Update locked Cargo dependencies (#70) - Add Nix flake (#73) - Add FUNDING.yml to project (#77) - Upload artifacts built in GitHub Actions (#105) - Cache build directory in GitHub Actions (#107) - Replace GitHub actions using deprecated features (#114) - Fix Nix flake build on Darwin (#117)

@Sighery

cargo repository URL by @Sighery in #97 fix: escaped newline immediately after a char, resolves #100 by @ahlinc in #102 Fixed CRLF behavior for tests, run tests on all platforms in GitHub CI by @ahelwer in #106 Support for 'select' loops by @mjambon in #111 Add support for 'until' loops by @mjambon in #112 Handle words containing bare '#' by @oxalica in #109 adding zsh expansion flags by @ryaminal in #115 Update CI by @verhovsky in #131 Update Cargo.toml by @nokome in #117 Rename ansii_c_string and string_expansion by @verhovsky in #121 rust: enables highlights query by @Dav1dde in #132 Swift Package Manager by @lukepistrol in #124 Fix scanning of heredoc_body to allow empty bodies by @jaopaulolc in #137 [fix] Here-documents: parse a “real” shell word (or close enough) after << by @domq in #142 Parse Bash's tests by @verhovsky in #135 Fix CI by @verhovsky in #145 Support file descriptors for here docs/strings by @verhovsky in #156 Support optional opening paren in case by @verhovsky in #157 Highlight "select" and "until" as keywords by @verhovsky in #168 Undo misguided package.json changes by @verhovsky in #173 Restore prebuild dependencies by @verhovsky in #174 feat: rewrite the scanner in C by @amaanq in #179 fix: make helper functions static to avoid compilation conflicts with other parsers by @amaanq in #182 Fixes by @amaanq in #186 fix: negated variable assignments in if statements by @kelly-lin in #183 Fixes by @amaanq in #187

@gy-balint

Added Add Hungarian localization (#131) @gy-balint Revise Turkish localization (#139) @geekdinazor Translate "thousand" to "千" for zh_CN (#127) @dofine Changed Update docs link to https://humanize.readthedocs.io (#128) @hugovk Fixed Move logic to convert aware datetime to naive into function (#123) @ErikKalkoken Docs: fix formatting of return value (#137) @hugovk

@sxyazi

This is the biggest update ever, with 36 new features, 24 bug fixes, and 3 performance improvements. Thank you to every contributor for making Yazi better and better! What's Changed feat: add Mintty (Git Bash) image preview support by @sxyazi in #103 refactor: use Url instead of PathBuf by @sxyazi in #107 fix: mime of javascript by @XYenon in #106 perf: load large folders in chunks by @sxyazi in #117 fix: set cursor block after closing input prompt from insert mode by @auvred in #109 fix: doesn't redirect the stderr of the clipboard command to null by @sxyazi in #119 feat: suspend process (Ctrl-Z) by @sxyazi in #120 fix: notification of file changes in linked directories by @sxyazi in #121 feat: file size sorting under the simplified file system by @sxyazi in #123 fix: show_hidden not properly applied to hovered folder by @sxyazi in #124 fix: recognize symlink directories as files by @sxyazi in #125 fix: respect symlink paths without canonicalizing them by @sxyazi in #126 feat: make Input streamable by @sxyazi in #127 perf: doesn't wait for the process of killing by @sxyazi in #128 feat: find by @sxyazi in #104 feat: tab-specific sorting by @sxyazi in #131 feat: new V, D, C keybinding for Input component by @sxyazi in #139 fix: swap description for search commands by @knutwalker in #141 fix: image position calculation by @sxyazi in #144 feat: support for image preview within tmux by @sxyazi in #147 feat: show keywords when in search mode by @sxyazi in #152 feat: fallback to built-in highlighting if jq is not installed by @ndtoan96 in #151 feat: make the glob expr case insensitive by default, and prepend \s to make it sensitive by @sxyazi in #156 fix: check relative path on expand_path by @sxyazi in #165 feat: support for FreeBSD permission type by @yggdr in #169 feat: multiple openers for a single rule by @Linus789 in #154 fix: leave upwards only if an IO error occurs in current by @sxyazi in #172 docs: add archlinuxcn installation guide by @Integral-Tech in #176 fix: image preview not working on Zellij by @Eric-Song-Nop in #181 feat: make trash optional by @sxyazi in #178 fix: inconsistent Shift key behavior on Unix and Windows by @ndtoan96 in #174 feat: new force option added for the remove command, which does not show the confirmation dialog on trashing/deleting by @sxyazi in #173 fix: typo of LICENSE file by @conradojordan in #201 feat: add flake.nix by @XYenon in #205 feat: include ignored files on search when hidden files are shown by @PhotonQuantum in #212 feat: new orphan option for opener rules, to keep the process running even when Yazi exited by @sxyazi in #216 feat: scroll half/full page with arrow percentage supported, and new Vi-like <C-u>, <C-d>, <C-b>, and <C-f> keybindings added by @TD-Sky in #213 feat: highlight matching words on finding by @PhotonQuantum in #211 feat: add BackTab support by @sxyazi in #209 fix: set stdio to null when orphan is true by @sxyazi in #229 feat: new force option for creating and renaming by @sxyazi in #208 feat: loop through to find by @ndtoan96 in #234 feat: backward/forward by @ndtoan96 in #230 perf: reimplement optimized natural sorting algorithm, speed up ~6 times for case-insensitive sorting by @sxyazi in #237 chore: changing the finding key to n/N to keep with Vim's conventions by @sxyazi in #238 feat: added new options to the `find' command for smart-case/ case-insensitive finds by @ndtoan96 in #240 feat: add new --no-cwd-file option to quit command for flexible cwd-file setting by @XOR-op in #245 fix: avoid adding non-regular paths to backstack by @ndtoan96 in #249 fix: support RGBA16 images by @sxyazi in #250 feat: support trash for NetBSD by @sxyazi in #251 feat: support environment variable in cd path by @ndtoan96 in #241 feat: new theme system by @sxyazi in #161 fix: cannot cd if there is whitespace in path by @ndtoan96 in #255 fix: add application/x-wine-extension-ini to text mime by @ndtoan96 in #259 fix: collect and fix all hard coded themes and color by @Eric-Song-Nop in #221 fix: some colors not readable in light mode by @sxyazi in #264 feat: better file hover state by @sxyazi in #269 refactor: split commands into separate files by @sxyazi in #272 feat: cancel selected items automatically on entering, leaving, copying, or cutting by @sxyazi in #273 feat: add a new Bar component, and make border styles customizable by @sxyazi in #278 fix: adapt another $TERM value of foot-extra for foot by @sxyazi in #277 refactor: simplify building conditions by @sxyazi in #280 chore: add git rev to nix pkg version by @XYenon in #206 feat: new Manager component for better style extensions by @sxyazi in #284 feat: cross-system opener rule support by @sxyazi in #289 fix: delegate the SIGINT signal of processes with orphan=true to their parent by @sxyazi in #290 feat: line mode by @sxyazi in #291 feat: shell completions & auto releasing by @TD-Sky in #282

1.10.14 (2023-11-26) Changelog: * PR #112: Put glue and pieces parameters to implode in correct order for PHP 7.4+ * PR #121: Fix PHP bug 81653: Typo in install-pear-nozlib.phar * PR #122: add %S EXPECTF capability * PR #124: Fix: Creation of dynamic property PEAR_Error::$callback is deprecated * PR #125: Fixed extension loaded check for pecl binaries * PR #126: Remove -n option from pecl.bat for shared extensions * PR #127: fix Using ${var} in strings is deprecated * PR #128: fix lingering license references to PHP license * PR #129: Exclude tests from composer classmap * PR #131: fix private lastError name

pkgsrc change: allow php82 and php83 4.2.4 (2023-10-02) * Fix Error using ssl array in options : Could not set option tlsauthtype (see gh issue #131) * Fix arginfo wargnings of the internal curl client user handler * Disable libidn support for v1.36-v1.38 due to broken locale detection

Changelog: Release version 12 Clean up some FreeBSD conditions (#98) (5a81837) Add ES256K support (#90) (e6a7ae7) Meson changes (#135) (c1569b7) Update CI (#8) (#129) (253549a) lib/openssl/rsaes.c: Fix issue where jose_hook_alg_find failed to find the … …existance of RSA_OAEP algorithm (58112df) Increase test program/scripts timeout values (#131) (45367dd) Fix test compilation warnings (#127) (aee1096) Adapt alg_comp test to different zlib (#142) (4878253) Use checkout v3 Github action to avoid warnings (#137) (6a639e2) Alternative fix for fedora:rawide (#138) (55b11f5) lib/openssl/hmac.c: rename hmac function to jhmac (#130) (33b9e0b) jose: build library only as shared (#119) (b72f8ca) meson: add option to disable building manpages (#118) (786b426) Add a more descriptive error when jwk gen fails (#105) (cdb1030) Use "command -v" instead of "which" (deprecated) (#125) (e1d66f1) Test for jq existing (used in jose-jwe-enc test) (#124) (ddc0d2a) Correct jose_jws.3 man page example (#122) (ad08d70) lib/hsh.c: rename hsh local variable (#111) (3d5b287) Avoid master word when possible (#120) (5bc6a92) Fix github action CI by setting appropriate centos (a091f56) Fix format of jose-jwe-enc man page (76924de) Meson Fixes (320336b) ci: make ubuntu:devel and fedora:rawhide not to fail the pipeline (1d15950) ci: retry when installing the deps in debian/ubuntu (bfdbb6e) ci: remove travis-ci (05d8e70)

4.12.0 (stable): Gtk: * AboutDialog: Deprecate ctor with use_header_bar. (Daniel Boles) Merge request !74 * Add SymbolicPaintable. * Add ScrollInfo and enum ListScrollFlags. * ColumnView, GridView, ListView, Viewport: Add scroll_to(). * ColumnViewRow, ListItem: Add set/get/property_accessible_description() and set/get/property_accessible_label(). * DropDown: Add set/get/property_header_factory() and set/get/property_search_match_mode(). * FileLauncher: Add set/get/property_always_ask(). * Window: Add is_suspended() and property_suspened(). (Kjell Ahlstedt) Documentation: * Remove README.SUN and other obsolete files (Kjell Ahlstedt) Issue #140 * Gtk::Widget: Describe managed and non-managed widgets (Kjell Ahlstedt) Issue #138 (Daniel Boles) Build: * recentinfo.hg: Fix Visual Studio build (Chun-wei Fan) Merge request !75 * Require gtk4 >= 4.12.0 (Kjell Ahlstedt) 4.11.3 (unstable): Gdk: * Pixbuf: Deprecate the create() method taking a Cairo::Surface. (Kjell Ahlstedt) Gtk: * Snapshot: Add some #includes. (Kjell Ahlstedt) Issue #137 (Daniel Boles) * Image: Deprecate the set() method taking a Pixbuf. * Notebook: Wrap the object returned from get_pages() in a SelectionListModelImpl (like Stack::get_pages()). * Picture: Deprecate set_pixbuf(). * ColumnView: Add set/get/property_header_factory(). * CssProvider: Deprecate load_from_data(). Add load_from_string() and load_from_bytes(). (Kjell Ahlstedt) Documentation: * Group some classes in the new ListView group and note that all classes in the TreeView group are deprecated. (Kjell Ahlstedt) Build: * Require gtk4 >= 4.11.3 (Kjell Ahlstedt) 4.11.2 (unstable): Gdk: * GLTexture: Deprecate create(). * Add GLTextureBuilder. (Kjell Ahlstedt) Gtk: * Box, BoxLayout: Add set/get/property_baseline_child(). * Button: Add set/get/property_can_shrink(). * CenterBox, CenterLayout: Add set/get/property_shrink_center_last(). * GLArea: Deprecate set/get/property_use_es(). Add set/get/property_allowed_apis(), get/property_api(). * Add ListHeader, SectionModel. * ListView: Add set/get/property_header_factory(). * MenuButton: Add set/get/property_can_shrink(). * SortListModel: Add set/get/property_section_sorter(). * Widget: Deprecate get_allocation(), get_allocated_width/height/baseline(). Add get_baseline(). (Kjell Ahlstedt) Build: * MSVC build: Mark GTKMM_API for the Entry class (Chun-wei Fan) Merge request !73 * Require gtk4 >= 4.11.2 (Kjell Ahlstedt) 4.11.1 (unstable): Gdk and Gtk: * Use callback functions with C linkage. (Kjell Ahlstedt) Issue glibmm#1 (Murray Cumming) Gdk: * Add Gdk::Graphene::Point, Rect and Size. They wrap the corresponding classes in the Graphene library. (Kjell Ahlstedt) * Add class DragSurfaceSize. * DragSurface: Add signal_compute_size(). * Surface: Add get/property_scale(). Deprecate create_similar_surface(). (Kjell Ahlstedt) Gtk: * Snapshot: Add push_repeat(), push_clip(), append_cairo(), append_texture(), append_color() with Gdk::Graphene::Rect. Deprecate other push_clip(), push_clip(), append_cairo(), append_texture(), append_color() overloads. Add translate(). * Widget: Add compute_bounds() and compute_point(). Deprecate translate_coordinates(). (Kjell Ahlstedt) * Add classes ColumnViewCell and ColumnViewRow. * ColumnView: Add set/get/property_tab_behavior() and set/get/property_row_factory(). * Add enum ListTabBehavior. * FlowBox and ListBox: Add remove_all(). * GridView and ListView: Add set/get/property_tab_behavior(). * ListItem: Add set/get/property_focusable(). (Kjell Ahlstedt) Build: * Require gtk4 >= 4.11.1 (Kjell Ahlstedt) 4.10.0 (stable): Gdk: * Add TextureDownloader * Add enum MemoryFormat, identical to MemoryTexture::Format * Texture: Add get_format() (Kjell Ahlstedt) Gtk: * VolumeButton: Deprecated * ProgressBar: Deprecate property_ellipsize() (Kjell Ahlstedt) * FileDialog: open_multiple_finish() and select_multiple_folders_finish() return std::vector<Glib::RefPtr<Gio::File>> instead of Glib::RefPtr<Gio::ListModel>. FileChooser: Deprecate get_files() and get_shortcut_folders(). Add get_files2() and get_shortcut_folders2(). (Kjell Ahlstedt) Issue #132 * FileDialog: Make open[_finish](), select_folder[_finish](), save[_finish](), open_multiple[_finish](), select_multiple_folders[_finish]() non-const. * FontDialog: Make choose_family[_finish]() and choose_face[_finish]() non-const. * Accessible: Add set_accessible_parent(), update_next_accessible_sibling() * MenuButton: Add set/get/property_active(). * ScaleButton: Add get/property_active(). * SearchEntry: Add set/get_placeholder_text(). (Kjell Ahlstedt) Tests: * Add filedialog test (Kjell Ahlstedt) Build: * Require gtk4 >= 4.10.0 (Kjell Ahlstedt) 4.9.3 (unstable): Gdk: * Display: Deprecate get_startup_notification_id(). * Monitor: Add get/property_description(). (Kjell Ahlstedt) Gtk: * Deprecated classes: Assistant, AssistantPage, LockButton, Statusbar * Gesture: Deprecate set_sequence_state(). * Accessible: Add enum Accessible::PlatformState. Add get_at_context(), get_platform_state(), get_accessible_parent(), get_bounds(), get_first_accessible_child(), get_next_accessible_sibling(). * Add ATContext and UriLauncher. (Kjell Ahlstedt) Documentation: * Gtk::Image, Picture, StringList, StringObject: Improve class descriptions (Kjell Ahlstedt) Build: * Require gtk4 >= 4.9.3 (Kjell Ahlstedt) 4.9.2 (unstable): Gdk: * Display: Deprecate notify_startup_complete() and put_event(). (Kjell Ahlstedt) Gtk: * Widget: Deprecate show() and hide(). (Use set_visible().) * Add FileLauncher. * CenterBox: Add property_[start|center|end]_widget(). * FileDialog: Rename get/set/property_current_filter() to get/set/property_default_filter(). Rename get/set/property_current_folder() to get/set/property_initial_folder(). Add get/set/property_initial_name(), get/set/property_initial_file(), get/set/property_accept_label(). Remove current_file parameter from open(), current_folder parameter from select_folder(). Delete get/set/property_shortcut_folders(). * GestureStylus: Add get/set/property_stylus_only(). * TreeExpander: Add get/set/property_indent_for_depth() and get/set/property_hide_expander(). * ToggleButton: Deprecate toggled(). (Kjell Ahlstedt) Build: * Require gtk4 >= 4.9.2 (Kjell Ahlstedt) * Meson build: Fix the evaluation of is_git_build on Windows (Kjell Ahlstedt) Issue #131 (William Roy) 4.9.1 (unstable): Gtk: * Deprecate about 50 classes: AppChooser, AppChooserButton, AppChooserDialog, AppChooserWidget, CellArea, CellAreaBox, CellAreaContext, CellLayout, CellRenderer, CellRendererAccel, CellRendererCombo, CellRendererPixbuf, CellRendererProgress, CellRendererSpin, CellRendererSpinner, CellRendererText, CellRendererToggle, CellView, ComboBox, ComboBoxText, EntryCompletion, IconView, ListStore, ListViewText, StyleContext, TreeDragDest, TreeDragSource, TreeIter and other classes in treeiter.hg, TreeModel, TreeModelFilter, TreeModelSort, TreePath, TreeRowReference, TreeSelection, TreeSortable, TreeStore, TreeView, TreeViewColumn, namespace CellRenderer_Generation, namespace TreeView_Private, ColorButton, ColorChooser, ColorChooserDialog, FileChooser, FileChooserDialog, FileChooserNative, FileChooserWidget, FontButton, FontChooser, FontChooserDialog, FontChooserWidget, MessageDialog, TreeModelColumn, TreeModelColumnRecord, InfoBar * Deprecate Window::signal_keys_changed() * Add ColumnViewColumn::set/get/property_id(), enum Collation, StringSorter::set/get/property_collation(), Widget::get_color, StyleProvider::add/remove_provider_for_display() * StringList::create(): Add default value (empty vector) to parameter * Add classes AlertDialog, ColorDialog, ColorDialogButton, ColumnViewSorter, FileDialog, FontDialog, FontDialogButton, enums DialogError, FontLevel (Kjell Ahlstedt) Demos: * Don't use deprecated API. Some demo programs have been renamed. (Kjell Ahlstedt) Build: * Meson build: Detect if we build from a git subtree (William Roy) Merge request !72 * Require gtk4 >= 4.9.1 (Kjell Ahlstedt) 4.8.0 (stable): Gtk: * TextView::get_tabs(): Fix a memory leak * Add enum ContentFit * Label: Add set/get/property_tabs() * Picture: Add set/get/property_content_fit() (Kjell Ahlstedt) Demos: * Dialog demo: Add a non-modal dialog (Kjell Ahlstedt) Issue #123 (PBS) Documentation: * Don't translate the preprocessor macro name GDK_MODIFIER_MASK (Kjell Ahlstedt) Issue #124 (PBS) Build: * Require gtk4 >= 4.7.2 (Kjell Ahlstedt) 4.7.1 (unstable): Gdk: * Add enum Gdk::GLApi, deprecate enum Gdk::GLAPI (Kjell Ahlstedt) Issue #113 (PBS) * Add enum ScrollUnit * Event: Add get_scroll_unit() (Kjell Ahlstedt) Gtk: * Allow managed Gtk::Window's (Kjell Ahlstedt) Issue #24 (Daniel Elstner) * Gtk::Object::_release_c_instance(): Unref orphan managed widgets (Kjell Ahlstedt) Issue #115 (PBS) * Entry: Add signal_activate() (Kjell Ahlstedt) Issue #100 (RedDocMD) * Don't derive gtkmm__GtkXxx GTypes from final types (Kjell Ahlstedt) Issue glib#2661 * Application: Only create window on first activate (Andrew Potter) Merge request !70 * CheckButton: Add set/unset/get/property_child() * EventControllerScroll: Add get_unit() * Picture: Deprecate set/get/property_keep_aspect_ratio() * SearchEntry: Add set/get/property_search_delay() * DirectoryList, FilterListModel, FlattenListModel, MultiFilter, MultiSelection, MultiSorter, NoSelection, SelectionFilterModel, ShortcutController, SingleSelection, SliceListModel, SortListModel, TreeListModel: Add property_item_type(), property_n_items() (Kjell Ahlstedt) * ApplicationWindow: Disambiguate activate_action() (Kjell Ahlstedt) Issue #122 (PBS) * Add class Inscription (Kjell Ahlstedt) * Widget: Add signal_destroy() (Baldvin Kovacs) Merge request !71 Documentation: * Gdk::Drag, Gdk::Drop, Gtk::Dialog, Gtk::Widget: Improve class descriptions (Kjell Ahlstedt) Build: * Meson build: Avoid configuration warnings (Kjell Ahlstedt) * Meson build: Fix builds with Vulkan-enabled GTK (Chun-wei Fan) Merge request !68 * Require gtk4 >= 4.7.1 (Kjell Ahlstedt) 4.6.1 (stable): Gdk: * Surface::signal_render(): Fix ref count of Cairo::Region (Baldvin Kovacs) Merge request !66 * enum GLAPI: Partially fix name clash with epoxy/gl.h A complete fix requires new API; will have to wait until gtkmm 4.8 (Kjell Ahlstedt) Issue #113 (PBS) Gtk: * Application::make_window_and_run(): Delay the deletion of Window (Kjell Ahlstedt) Issue #114 (PBS) Build with Meson: * Don't use deprecated execute(..., gui_app: ...) Require meson >= 0.56.0 (Kjell Ahlstedt) Issue #111 * Check if Perl is required for building documentation (Kjell Ahlstedt) 4.6.0 (stable): Gdk: * Deprecate Gdk::Cairo::draw_from_gl(). * Display: Add create_gl_context(). * Texture: Add create_from_filename(), create_from_bytes(), save_to_png_bytes(), save_to_tiff(), save_to_tiff_bytes(). * GLContext: Deprecate set_use_es() and unset_use_es(). Add set/get/property_allowed_apis() and get/property_api(). (Kjell Ahlstedt) Gtk: * DropDown: Add set/get/property_show_arrow(). * FlowBox: Add prepend(), append(). * Label: Add set/get/property_natural_wrap_mode(). * MenuButton: Add set/unset/get/property_child(). * Settings: Add property_gtk_hint_font_metrics(). * TextChildAnchor: Add create(replacement_character). * TextTag: Add properties line_height(), text_transform(), word(), sentence(), line_height_set(), text_transform_set(), word_set(), sentence_set(). * TreeExpander: Add set/get/property_indent_for_icon(). * Window: Add property_titlebar(). (Kjell Ahlstedt) Documentation: * Gtk::Object: Change deprecated `pack_start` to `append`. (LI Daobing) Merge request !65 Build: * MSVC build: Support Visual Studio 2022. NMake Makefiles: Fix header installation. (Chun-wei Fan) * Require pangomm-2.48 >= 2.50.0, gtk4 >= 4.6.0 (Kjell Ahlstedt) 4.4.0 (stable): Gdk: * PixbufAnimation: Add create_from_stream(), create_from_stream_async(), create_from_stream_finish(), create_from_resource(). (Kjell Ahlstedt) * ContentFormats: Add parse(). Display: Add prepare_gl(). GLContext: Deprecate get/property_shared_context(). Add is_shared(). (Kjell Ahlstedt) Gtk: * Add EventControllerLegacy. (BogDan Vatra) Merge request !64 * DropDown::get_selected_item(), ListItem::get_item(), SingleSelection::get_selected_item(), TreeExpander::get_item(), TreeListRow::get_item(): Don't try to dynamic_cast the return value to Glib::Object. It fails if the object has been constructed as an interface. (Kjell Ahlstedt) * Fixed the const versions of Assistant::get_page(), NoteBook::get_page() and Stack::get_page(). Fixed MediaControls::set_media_stream() and Video::set_media_stream(). (Kjell Ahlstedt) * Application, Window: Swap inclusions. Include window.h in application.h instead of application.h in window.h. === Note === This will affect compilation of code that uses Application without including gtkmm/application.h. (Kjell Ahlstedt) * DropTarget: Deprecate get/property_drop(). Add get/property_current_drop(). FileFilter: Add add_suffix(). MediaStream: Deprecate prepared(), unprepared() and ended(). Add stream_prepared(), stream_unprepared() and stream_ended(). MenuButton: Add set/get/property_always_show_arrow() and set/get/property_primary(). TextView: Add set/get_rtl_context() and set/get_ltr_context(). (Kjell Ahlstedt) Demos: * Images, SizeGroup, ListStore and TreeStore demos: Minor fixes. (Kjell Ahlstedt) * Add Add ColumnView demo. (Kjell Ahlstedt) Build: * Require gtk4 >= 4.4.0. (Kjell Ahlstedt)

Changes in 2.2.5 #117: Document that empty for Concurrently waits forever #120: Add ConcurrentlyE. #123: Fix failing concurrentlyE tests in older GHCs. #124: Allow hashable 1.4 #126: Semigroup and Monoid instances for ConcurrentlyE #120: Add ConcurrentlyE #138: expose internals as Control.Concurrent.Async.Internal #131: Fix typos in docs #132: waitAny(Catch): clarify non-empty input list requirement #142: Add cancelMany #135, #145, #150: Support for GHC 9.4, 9.6, 9.8 Document that empty for Concurrently waits forever.

v20.4.0 ======= Features -------- - Replace deprecated ssl.wrap_socket with SSLContext.wrap_socket and update examples in connection.py docs. (#216) v20.3.1 ======= No significant changes. v20.3.0 ======= Features -------- - Added support for SASL login. (#195) Bugfixes -------- - Better handling of escape sequences in message tags. (#205) v20.2.0 ======= Features -------- - Require Python 3.8 or later. v20.1.1 ======= * #213: Pinned against jaraco.text 3.10 due to change in interface. v20.1.0 ======= * #196: In irc.bot, avoid hanging idle when the first connection attempt fails. v20.0.0 ======= * ``SingleServerIRCBot`` no longer accepts ``reconnection_interval`` as a parameter. * Added server support for NOTICE commands. * Require Python 3.7 or later. v19.0.1 ======= * #176: Fix issues with version number reporting. Restored version version number reporting in bot and client. v19.0.0 ======= * ``irc.client`` no longer exposes a ``VERSION`` or ``VERSION_STRING``. To get the version, call ``importlib.metadata.version('irc')`` directly. v18.0.0 ======= * Require Python 3.6 or later. 17.1 ==== * Rely on `importlib_metadata <https://pypi.org/project/importlib_metadata/>`_ for loading version from metadata. Removes implicit dependency on setuptools and pkg_resources. * #158: The AsyncIO server now accepts a connection factory to enable features like SSL and IPv6 support. * #155: ``SimpleIRCClient`` now has a ``dcc`` method for initiating and associating a DCCConnection object with the client. ``DCCConnection.listen`` now accepts a ``address`` parameter. Deprecated ``SimpleIRCClient.dcc_listen`` and ``SimpleIRCClient.dcc_connect`` in favor of the better separation of concerns. Clients should replace:: client.dcc_connect(addr, port, type) client.dcc_listen(type) with:: client.dcc(type).connect(addr, port) client.dcc(type).listen() 17.0 ==== * Removed ``irc.buffer`` module, deprecated in 14.2. * #153: Drop support for Python 3.3 and 2.7. 16.4 ==== * Long Term Service release for Python 2.7. * #149: ``AioConnection.connect`` moved to coroutine, added disconnect handling for AsyncIO. 16.3 ==== * #140: Methods now use 'connection' and 'event' for parameter names. * #135 via #144: Added AsyncIO implementation. 16.2.1 ====== * Package refresh and cleanup. 16.2 ==== * #133: In ``irc.server``, add support for ISON. 16.1 ==== * #131: Add ``Connection.encode`` and ``Connection.transmit_encoding`` to enable encodings other than UTF-8 to be used when transmitting text. 16.0 ==== * Removed deprecated ``execute_*`` methods on ``Connection`` and ``Reactor`` as introduced in 15.0. * Fixed link in README. 15.1.1 ====== * New ``send_items`` method takes star args for simplicity in the syntax and usage. 15.1 ==== * Introduce ``ServerConnection.send_items``, consolidating common behavior across many methods previously calling ``send_raw``. 15.0.6 ====== * Now publish `documentation <https://python-irc.readthedocs.io/>`_ to Read The Docs. 15.0.5 ====== * #119: Handle broken pipe exception in IRCClient _send() (server.py). 15.0.4 ====== * #116: Correct invocation of execute_every. 15.0.3 ====== * #115: Fix AttributeError in ``execute_at`` in scheduling support. 15.0.2 ====== * #113: Use preferred scheduler in the bot implementation. 15.0.1 ====== * Deprecated calls to Connection.execute_* and Reactor.execute_*. Instead, call the equivalently-named methods on the reactor's scheduler. 15.0 ==== * The event scheduling functionality has been decoupled from the client.Reactor object. Now the reactor will construct a Scheduler from the scheduler_class property, which must be an instance of irc.schedule.IScheduler. The ``_on_schedule`` parameter is no longer accepted to the Reactor class. Implementations requiring a signal during scheduling should hook into the ``add`` method of the relevant scheduler class. * Moved the underlying scheduler implementation to `tempora <https://pypi.org/project/tempora>`_, allowing it to be re-used for other purposes. 14.2.2 ====== * Issue #98: Add an ugly hack to force ``build_sphinx`` command to have the requisite libraries to build module documentation. 14.2.1 ====== * Issue #97: Restore ``irc.buffer`` module for compatibility. * Issue #95: Update docs to remove missing or deprecated modules. * Issue #96: Declare Gitter support as a badge in the docs. 14.2 ==== * Moved buffer module to `jaraco.stream <https://pypi.python.org/pypi/jaraco.stream>`_ for use in other packages. 14.1 ==== * ``SingleServerIRCBot`` now accepts a ``recon`` parameter implementing a ReconnectStrategy. The new default strategy is ExponentialBackoff, implementing an exponential backoff with jitter. The ``reconnection_interval`` parameter is now deprecated but retained for compatibility. To customize the minimum time before reconnect, create a custom ExponentialBackoff instance or create another ReconnectStrategy object and pass that as the ``recon`` parameter. The ``reconnection_interval`` parameter will be removed in future versions. * Issue #82: The ``ExponentialBackoff`` implementation now protects from multiple scheduled reconnects, avoiding the issue where reconnect attempts accumulate exponentially when the bot is immediately disconnected by the server. 14.0 ==== * Dropped deprecated constructor ``connection.Factory.from_legacy_params``. Use the natural constructor instead. * Issue #83: ``connection.Factory`` no longer attempts to bind before connect unless a bind address is specified. 13.3.1 ====== * Now remove mode for owners, halfops, and admins when the user is removed from a channel. * Refactored the Channel class implementation for cleaner, less repetitive code. * Expanded tests coverage for Channel class. 13.3 ==== * Issue #75: In ``irc.bot``, add support for tracking admin status (mode 'a') in channels. Use ``channel.is_admin`` or ``channel.admins`` to identify admin users for a channel. * Removed deprecated irc.logging module. 13.2 ==== * Moved hosting to github. 13.1.1 ====== * Issue #67: Fix infinite recursion for ``irc.strings.IRCFoldedCase`` and ``irc.strings.lower``. 13.1 ==== * Issue #64: ISUPPORT PREFIX now retains the order of permissions for each prefix. 13.0 ==== * Updated ``schedule`` module to properly support timezone aware times and use them by default. Clients that rely on the timezone naïve datetimes may restore the old behavior by overriding the ``schedule.now`` and ``schedule.from_timestamp`` functions like so: schedule.from_timestamp = datetime.datetime.fromtimestamp schedule.now = datetime.datetime.now Clients that were previously patching ``schedule.DelayedCommand.now`` will need to instead patch the aforementioned module-global methods. The classmethod technique was a poor interface for effectively controlling timezone awareness, so was likely unused. Please file a ticket with the project for support with your client as needed. 12.4.2 ====== * Bump to jaraco.functools 1.5 to throttler failures in Python 2. 12.4 ==== * Moved ``Throttler`` class to `jaraco.functools <https://bitbucket.org/jaraco/jaraco.functools>`_ 1.4. 12.3 ==== * Pull Request #33: Fix apparent escaping issue with IRCv3 tags. 12.2 ==== * Pull Request #32: Add numeric for WHOX reply. * Issue #62 and Pull Request #34: Add support for tags in message processing and ``Event`` class. 12.1.2 ====== * Issue #59: Fixed broken references to irc.client members. * Issue #60: Fix broken initialization of ``irc.server.IRCClient`` on Python 2. 12.1.1 ====== * Issue #57: Better handling of Python 3 in testbot.py script. 12.1 ==== * Remove changelog from package metadata. 12.0 ==== * Remove dependency on jaraco.util. Instead depend on surgical packages. * Deprecated ``irc.logging`` in favor of ``jaraco.logging``. * Dropped support for Python 3.2.

0.4.3.5 #131 Add At and Ixed instance for HashSet.

2024-05-05 -- 0.9.8 >>>>>>>>>>>>> SECURITY >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> * Fixed: [CVE-2024-34402] Protect against integer overflow in ComposeQueryEngine (GitHub #183, GitHub #185) * Fixed: [CVE-2024-34403] Protect against integer overflow in ComposeQueryMallocExMm (GitHub #183, GitHub #186) >>>>>>>>>>>>> SECURITY >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> * Changed: Require CMake >=3.5.0 (GitHub #172) * Added: CMake option URIPARSER_SHARED_LIBS=(ON|OFF) to control, whether to produce a shared or static library for uriparser and that alone, falls back to standard BUILD_SHARED_LIBS if available, else defaults to "ON" (GitHub #169, GitHub #170) * Improved: Document that scheme-based normalization a la section 6.2.3 of RFC 3986 is a responsibility of the application using uriparser (GitHub #173, GitHub #174) * Improved: Document supported code points for functions uriEscape(Ex)W (GitHub #171, GitHub #175) * Infrastructure: Update Clang from 15 to 18 (GitHub #161, GitHub #187) * Infrastructure: Adapt to breaking changes in Clang packaging (GitHub #160) * Infrastructure: Get sanitizer CFLAGS and LDFLAGS back in sync (GitHub #161) * Infrastructure: Pin GitHub Actions to specific commits for security (GitHub #165) * Soname: 1:31:0 — see https://verbump.de/ for what these numbers do 2022-10-05 -- 0.9.7 * Fixed: Multiple issues with IPv6 and IPvFuture literal parsing (GitHub #146, GitHub #150) Thanks to Scallop Ye for the report and the pull request! * Fixed: Fix symbol visibility for -DBUILD_SHARED_LIBS=OFF (GitHub #139, GitHub #141); thanks to Mariusz Zaborski for the report! * Fixed: For MinGW, use size_t for inet_ntop declaration and fix macro checks for both MinGW and mingw-w64 (GitHub #131) * Fixed: Compiler warnings (GitHub #132, GitHub #152) * Improved: Use name UriConfig.h rather than generic config.h for the config header file to avoid name clashes and also include it through "UriConfig.h" with quotes rather than <UriConfig.h> so that it is found in quote path locations (GitHub #149) Thanks to Gaspard Petit for bringing this up! * Improved: Document need for UriConfig.h in UriMemory.c (GitHub #136) * Infrastructure: Add (support for) Visual Studio 17/2022 (GitHub #152) * Infrastructure: Drop (support for) Visual Studio <=14/2015 (GitHub #152) * Infrastructure: Update Clang from 13 to 15 (GitHub #143, GitHub #151) * Infrastructure: Make MinGW with 32bit Wine on Ubuntu 20.04 possible (GitHub #142, GitHub #144, GitHub #145) * Soname: 1:30:0 — see https://verbump.de/ for what these numbers do

@cmaritan

This package hasn't been updated in a long time. The following list of changes was therefore curated to focus on features or recent bugfixes. Changes in 1.7.2: * Bug #899 Guided Remediation: Parse paths in npmrc auth fields correctly. * Bug #908 Fix rust call analysis by explicitly disabling stripping of debug info. * Bug #914 Fix regression for go call analysis introduced in 1.7.0. Changes in 1.7.0: * Feature #352 Guided Remediation Introducing our new experimental guided remediation feature on osv-scanner fix subcommand. * Feature #805 Include CVSS MaxSevirity in JSON output. Changes in 1.6.2: * Feature #694 OSV-Scanner now has subcommands! The base command has been moved to scan (currently the only commands is scan). By default if you do not pass in a command, scan will be used, so CLI remains backwards compatible. * Feature #776 Add pdm lockfile support. Changes in 1.6.0 and 1.6.1: * Feature #694 Add support for NuGet lock files version 2. * Feature #655 Scan and report dependency groups (e.g. "dev dependencies") for vulnerabilities. * Feature #702 Created an option to skip/disable upload to code scanning. * Feature #732 Add option to not fail on vulnerability being found for GitHub Actions. * Feature #729 Verify the spdx licenses passed in to the license allowlist. Changes in 1.5.0: * Feature #501 Add experimental license scanning support! * Feature #642 Support scanning renv files for the R language ecosystem. * Feature #513 Stabilize call analysis for Go * Feature #676 Simplify return codes: Return 0 if there are no findings or errors. Return 1 if there are any findings (license violations or vulnerabilities). Return 128 if no packages are found. * Feature #651 CVSS v4.0 support. * Feature #60 Pre-commit hook support. Changes in 1.4.3: * Feature #621 Add support for scanning vendored C/C++ files. * Feature #581 Scan submodules commit hashes. Changes in 1.4.1: * Feature #534 New SARIF format that separates out individual vulnerabilities * Experimental Feature #57 Experimental Github Action Changes in 1.4.0: * Feature #183 Add (experimental) offline mode * Feature #452 Add (experimental) rust call analysis, detect whether vulnerable functions are actually called in your Rust project * Feature #505 OSV-Scanner support custom lockfile formats Changes in 1.3.5: * Feature #409 Adds an additional column to the table output which shows the severity if available. Changes in 1.3.0: * Feature #198 GoVulnCheck integration! Try it out when scanning go code by adding the --experimental-call-analysis flag. * Feature #260 Support -r flag in requirements.txt files. * Feature #300 Make IgnoredVulns also ignore aliases. * Feature #304 OSV-Scanner now runs faster when there's multiple vulnerabilities. Changes in 1.2.0: * Feature #168 Support for scanning debian package status file, usually located in /var/lib/dpkg/status. Thanks @cmaritan * Feature #94 Specify what parser should be used in --lockfile. * Feature #158 Specify output format to use with the --format flag. * Feature #165 Respect .gitignore files by default when scanning. * Feature #156 Support markdown table output format. Thanks @deftdawg * Feature #59 Support conan.lock lockfiles and ecosystem Thanks @SSE4 * Updated documentation! Check it out here: https://google.github.io/osv-scanner/ Changes in 1.1.0: * Feature #98: Support for NuGet ecosystem. * Feature #71: Now supports Pipfile.lock scanning. * Bug #85: Even better support for narrow terminals by shortening osv.dev URLs. * Bug #105: Fix rare cases of too many open file handles. * Bug #131: Fix table highlighting overflow. * Bug #101: Now supports 32 bit systems. Tested on NetBSD/amd64.

Changelog: ### GMime 3.2.15 * Fixed the g_mime_object_get_header API definition to note that it can return null * Fixed a memory leak in address_parse() (issue #159) * Added custom header folding logic for the Newsgroups: header (issue #162) * Fixed a configure issue regarding ac_cv_sys_file_offset_bits (issue #158) * Fixed an infinite loop in the Content-Type and Content-Disposition parameter serialization logic (issue #165) ### GMime 3.2.14 * Avoid clearing the header list of a GMimeMessage when adding addresses to an address header. (issue #129) * Added the internet_address_list_append_parse() prototype definition to internet-address.h. (issue #128) * Use gtk-doc ulink syntax in doc comments instead of `<a href=...>`. (issue #131) * Fixed rfc2047 token decoding logic for base64 encodings. (issue #133) * Properly handle GDateTime UTC offsets with non-zero seconds. (issue #134) * Improved introspection data for bindings such as Vala. * Improved address name quoting. * Added a GNotifyDestroy to the GMimeParserOptions callback. * Fixed the URL linkifier logic to properly handle links without a '/' before the query string. * Fixed the URL linkifier logic to handle domains that start with numbers. (issue #152) * Reverted base64 decoder optimizations from 3.2.10 and 3.2.11 to support chunked base64. (issue #150) ### GMime 3.2.13 * Optimized parsing of messages with lots of address headers. (issue #126) ### GMime 3.2.12 * Fixed a memory leak in g_mime_gpgme_get_decrypt_result(). * Updated vapigen.m4, introspection.m4, and gpgme.m4 to improve cross-platform builds. * Add and use ax_lib_socket_nsl.m4 so that systems that do not require linkage with libnsl are not forced to link with it unnecessesarily. * Changed the build system to no longer use dolt (which is obsolete). ### GMime 3.2.11 * Fixed a bug in the base64 decoder. D'oh! ### GMime 3.2.10 * Improved performance of base64 encoder by ~5%. * Improved performance of base64 decoder by ~25%. * Unref the autocrypt header after adding it to the list. (issue #118) * Work around a bug in g_time_zone_new_offset() by using identifiers instead. (issue #120) ### GMime 3.2.9 * g_mime_multipart_signed_verify() now allows type/subtype and type/x-subtype signature parts. (issue #115) * Fixed header folding logic to avoid folding the first line of a header value. (issue #112 and issue #113) * Fixed bugs discovered by static analysis. (issue #110) * Fixed GMimeStreamPipe to set errno to ESPIPE for seek/tell/length methods. * Fixed GMimeCertificates to prefer gpgme_user_id_t's address field over the email field. (issue #102) ### GMime 3.2.8 * Various fixes to Vala (and other?) language bindings. (issue #96 and issue #101) * Enabled build for PPC64LE architecture (issue #100) * Added g_mime_object_write_content_to_stream() (issue #97) * Fixed parameter list parsing logic to not report a warning when everything is valid. * Fixed the parser to handle MIME parts without headers -or- content of any kind.

Upstream changes: ## 2024 05 11 - The option --valign-signed-numbers, or -vsn is now the default. It was introduced in the previous release has been found to significantly improve the overall appearance of columns of signed and unsigned numbers. See the previous Change Log entry for an example. This will change the formatting in scripts with columns of vertically aligned signed and unsigned numbers. Use -nvsn to turn this option off and avoid this change. - Previously, a line break was made before a short concatenated terminal quoted string, such as "\n", if the previous line had a greater starting indentation. The break is now placed after the short quote. This keeps code a little more compact. For example: # old rule: break before "\n" here because '$name' has more indentation: my $html = $this->SUPER::genObject( $query, $bindNode, $field . ":$var", $name, "remove", "UNCHECKED" ) . "\n"; # new rule: break after a short terminal quote like "\n" for compactness; my $html = $this->SUPER::genObject( $query, $bindNode, $field . ":$var", $name, "remove", "UNCHECKED" ) . "\n"; - The option --delete-repeated-commas is now the default. It makes the following checks and changes: - Repeated commas like ',,' are removed with a warning - Repeated fat commas like '=> =>' are removed with a warning - The combination '=>,' produces a warning but is not changed These warnings are only output if --warning-output, or -w, is set. Use --nodelete-repeated-commas, or -ndrc, to retain repeated commas. - The operator ``**=`` now has spaces on both sides by default. Previously, there was no space on the left. This change makes its spacing the same as all other assignment operators. The previous behavior can be obtained with the parameter setting -nwls='**='. - The option --file-size-order, or -fso is now the default. When perltidy is given a list of multiple filenames to process, they are sorted by size and processed in order of increasing size. This can significantly reduce memory usage by Perl. This option has always been used in testing, where typically several jobs each operating on thousands of filenames are running at the same time and competing for system resources. If this option is not wanted for some reason, it can be deactivated with -nfso. - In the option --dump-block-summary, the number of sub arguments indicated for each sub now includes any leading object variable passed with an arrow-operator call. Previously the count would have been decreased by one in this case. This change is needed for compatibility with future updates. - Fix issue git #138 involving -xlp (--extended-line-up-parentheses). When multiple-line quotes and regexes have long secondary lines, these line lengths could influencing some spacing and indentation, but they should not have since perltidy has no control over their indentation. This has been fixed. This will mainly influence code which uses -xlp and has long multi-line quotes. - Add option --minimize-continuation-indentation, -mci (see git #137). This flag allows perltidy to remove continuation indentation in some special cases where it is not really unnecessary. For a simple example, the default formatting for the following snippet is: # perltidy -nmci $self->blurt( "Error: No INPUT definition for type '$type', typekind '" . $type->xstype . "' found" ); The second and third lines are one level deep in a container, and are also statement continuations, so they get indented by the sum of the -i value and the -ci value. If this flag is set, the indentation is reduced by -ci spaces, giving # perltidy -mci $self->blurt( "Error: No INPUT definition for type '$type', typekind '" . $type->xstype . "' found" ); This situation is relatively rare except in code which has long quoted strings and the -nolq flag is also set. This flag is currently off by default, but it could become the default in a future version. - Add options --dump-mismatched-args (or -dma) and --warn-mismatched-arg (or -wma). These options look for and report instances where the number of args expected by a sub appear to differ from the number passed to the sub. The -dump version writes the results for a single file to standard output and exits: perltidy -dma somefile.pl >results.txt The -warn version formats as normal but reports any issues as warnings in the error file: perltidy -wma somefile.pl The -warn version may be customized with the following additional parameters if necessary to avoid needless warnings: --warn-mismatched-arg-types=s (or -wmat=s), --warn-mismatched-arg-exclusion-list=s (or -wmaxl=s), and --warn-mismatched-arg-undercount-cutoff=n (or -wmauc=n). --warn-mismatched-arg-overcount-cutoff=n (or -wmaoc=n). These are explained in the manual. - Add option --valign-wide-equals, or -vwe, for issue git #135. Setting this parameter causes the following assignment operators = **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x= to be aligned vertically with the ending = all aligned. For example, here is the default formatting of a snippet of code: $str .= SPACE x $total_pad_count; $str_len += $total_pad_count; $total_pad_count = 0; $str .= $rfields->[$j]; $str_len += $rfield_lengths->[$j]; And here is the same code formatted with -vwe: # perltidy -vwe $str .= SPACE x $total_pad_count; $str_len += $total_pad_count; $total_pad_count = 0; $str .= $rfields->[$j]; $str_len += $rfield_lengths->[$j]; This option currently is off by default to avoid changing existing formatting. - Added control --delete-interbracket-arrows, or -dia, to delete optional hash ref and array ref arrows between brackets as in the following expression (see git #131) return $self->{'commandline'}->{'arg_list'}->[0]->[0]->{'hostgroups'}; # perltidy -dia gives: return $self->{'commandline'}{'arg_list'}[0][0]{'hostgroups'}; Added the opposite control --aia-interbracket-arrows, or -aia, to add arrows. So applied to the previous line the arrows are restored: # perltidy -aia return $self->{'commandline'}->{'arg_list'}->[0]->[0]->{'hostgroups'}; The manual describes additional controls for adding and deleting just selected interbracket arrows.

@olleolleolle

1.8.2 (2024-09-24) What's Changed * Drop commented-out line by @olleolleolle in #108 * Add Ruby 3.1 & 3.2 to CI matrix by @tricknotes in #109 * Fix/redos by @ooooooo-q in #114 * Raise HTTPStatus::BadRequest for requests with invalid/duplicate content-length headers by @jeremyevans in #120 * Bump actions/checkout from 3 to 4 by @dependabot in #121 * Improve CI by @hsbt in #123 * Fix WEBrick::TestFileHandler#test_short_filename test not working on mswin by @KJTsanaktsidis in #128 * Fix bug chunk extension detection by @jeremyevans in #125 * Fix CI. by @ioquatix in #131 * Merge multiple cookie headers, preserving semantic correctness. by @ioquatix in #130 * Test on macos-latest by @byroot in #132 * Require CRLF line endings in request line and headers by @jeremyevans in #138 * Prefer squigly heredocs. by @ioquatix in #143 * Only strip space and horizontal tab in headers by @jeremyevans in #141 * Treat missing CRLF separator after headers as an EOFError by @jeremyevans in #142 * Return 400 response for chunked requests with unexpected data after chunk by @jeremyevans in #136 * Fix reference to URI::REGEXP::PATTERN::HOST by @casperisfine in #144 * Prevent request smuggling by @jeremyevans in #146 New Contributors * @tricknotes made their first contribution in #109 * @ooooooo-q made their first contribution in #114 * @KJTsanaktsidis made their first contribution in #128 * @byroot made their first contribution in #132 * @casperisfine made their first contribution in #144

2.2 (2024-08-27) * WebUI: More correct filtering reports by disposition value * WebUI: add actual fail count to the report list (#96) * WebUI: implemented use of abbreviated form for numbers in the list of reports * WebUI: added a toolbar and column management to the report list. The default column set was changed * Implemented destroying user sessions if user_management is set to false * Added ignoring unknown tags in XML report files * Fixed undefined property usage in utils/reports_cleaner.php (#131) * Fixed an error occuring when adding a user without the level parameter via utils/users_admin.php * Improved error message when passing invalid time to Report dialog * Updated the "Utilities" section in README.md * Other minor changes and updates * Some code optimization and refactoring 2.2.1 (2024-08-28) * Fixed an error "Undefined array key" occurring when processing an incorrect report file (#132)

coyhile added 2 commits August 5, 2018 16:14

Update net/freeradius to v3.0.17

b446991

Fix module builds that needed explicit LDAP disable

b46b520

jperkin closed this Oct 9, 2018

jperkin pushed a commit that referenced this pull request Apr 3, 2020

glib-networking: update to 2.64.1.

3e57bb9

2.64.1 - March 27, 2020 ======================= - Warn when server-identity property is missing (#130) - Fix crashes in debug logs (#131) - Fix write loop in OpenSSL backend (!117)

jperkin pushed a commit that referenced this pull request Sep 17, 2022

www/ruby-css-parser: update to 1.12.0

eb39b4c

1.12.0 (2022-09-16) * Improve exception message for missing value #131 * :rule_set_exceptions option added #132

jperkin pushed a commit that referenced this pull request May 1, 2024

devel/hs-microlens-platform: Update to 0.4.3.5

4aec8c9

0.4.3.5 #131 Add At and Ixed instance for HashSet.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update freeradius to v3.0.17 and fix module builds #131

Update freeradius to v3.0.17 and fix module builds #131

coyhile commented Aug 5, 2018

coyhile commented Oct 5, 2018

jperkin commented Oct 8, 2018

jperkin commented Oct 9, 2018

Update freeradius to v3.0.17 and fix module builds #131

Update freeradius to v3.0.17 and fix module builds #131

Conversation

coyhile commented Aug 5, 2018

coyhile commented Oct 5, 2018

jperkin commented Oct 8, 2018

jperkin commented Oct 9, 2018