Update setup instructions for OpenIndiana Hipster to use gpg2 instead of gpg #237
Assignees
Comments
jperkin
pushed a commit
that referenced
this issue
Jan 3, 2020
Version 3.1.1.1 * Fix for GHCJS. #431 Version 3.1.1.0 * A new API: gracefulClose. #417 * touchSocket, unsafeFdSocket: Allow direct access to a socket's file descriptor while providing tools to prevent it from being garbage collected. This also deprecated fdSocket in favor of unsafeFdSocket and withFdSocket. #423 * socketToFd: Duplicates a socket as a file desriptor and closes the source socket. #424 Version 3.1.0.1 * getAddrInfo: raise exception if no AddrInfo returned. #410 * Avoid catching SomeException. #411 Version 3.1.0.0 * Making GC of socket safer. #399 * Deprecating fdSocket. Use withFdSocket instead to ensure that sockets are GCed in proper time. #399 Version 3.0.1.1 * Fix blocking if_nametoindex errors on Windows #391 Version 3.0.1.0 * Added getSocketType :: Socket -> IO SocketType. #372 * Correcting manual and brushing up test cases #375 * Fixed longstanded bug in getContents on mac #375 * Fixing regression: set correct sockaddr length for abstract addresses for Linux. #374 Version 3.0.0.1 * Fixed a bug in connect where exceptions were not thrown #368 Version 3.0.0.0 * Breaking change: the Network and Network.BSD are removed. Network.BSD is provided a new package: network-bsd. * Breaking change: the signatures are changed: old fdSocket :: Socket -> CInt new fdSocket :: Socket -> IO CInt old mkSocket :: CInt -> Family -> SocketType -> ProtocolNumber -> SocketStatus -> IO Socket new mkSocket :: CInt -> IO Socket * Breaking change: the deprecated APIs are removed: send, sendTo, recv, recvFrom, recvLen, htonl, ntohl, inet_addr, int_ntoa, bindSocket, sClose, SocketStatus, isConnected, isBound, isListening, isReadable, isWritable, sIsConnected, sIsBound, sIsListening, sIsReadable, sIsWritable, aNY_PORT, iNADDR_ANY, iN6ADDR_ANY, sOMAXCONN, sOL_SOCKET, sCM_RIGHTS, packSocketType, getPeerCred. * Breaking change: SockAddrCan is removed from SockAddr. * Socket addresses are extendable with Network.Socket.Address. * "socket" is now asynchronous-exception-safe. #336 * "recvFrom" returns (0, addr) instead of throwing an error on EOF. #360 * All APIs are available on any platforms. * Build system is simplified. * Bug fixes. Version 2.8.0.1 * Eensuring that accept returns a correct sockaddr for unix domain. #400 * Avoid out of bounds writes in pokeSockAddr. #400 Version 2.8.0.0 * Breaking change: PortNumber originally contained Word16 in network byte order and used "deriving Ord". This results in strange behavior on the Ord instance. Now PortNumber holds Word16 in host byte order. #347 * Breaking change: stopping the export of the PortNum constructor in PortNumber. * Use bytestring == 0.10.* only. * Use base >= 4.7 && < 5. Version 2.7.0.2 * Removing withMVar to avoid the deadlock between "accept" and "close" #330 * "close" does not throw exceptions. A new API: "close'" throws exceptions when necessary. #337 * Fixing the hang of lazy sendAll. #340 * Installing NetDef.h (#334) #334 Version 2.7.0.1 * A new API: socketPortSafe. #319 * Fixing a drain bug of sendAll. #320 * Porting the new CALLCONV convention from master. #313 * Withdrawing the deprecations of packFamily and unpackFamily. #324 Version 2.7.0.0 * Obsoleting the Network module. * Obsoleting the Network.BSD module. * Obsoleting APIs: MkSocket, htonl, ntohl, getPeerCred, getPeerEid, send, sendTo, recv, recvFrom, recvLen, inet_addr, inet_ntoa, isConnected, isBound, isListening, isReadable, isWritable, aNY_PORT, iNADDR_ANY, iN6ADDR_ANY, sOMAXCONN, sOL_SOCKET, sCM_RIGHTS, packFamily, unpackFamily, packSocketType * Breaking change: do not closeFd within sendFd. #271 * Exporting ifNameToIndex and ifIndexToName from Network.Socket. * New APIs: setCloseOnExecIfNeeded, getCloseOnExec and getNonBlock * New APIs: isUnixDomainSocketAvailable and getPeerCredential * socketPair, sendFd and recvFd are exported even on Windows. Version 2.6.3.5 * Reverting "Do not closeFd within sendFd" #271 Version 2.6.3.4 * Don't touch IPv6Only when running on OpenBSD #227 * Do not closeFd within sendFd #271 * Updating examples and docs. Version 2.6.3.3 * Adds a function to show the defaultHints without reading their undefined fields #291 * Improve exception error messages for getAddrInfo and getNameInfo #289 Version 2.6.3.2 * Zero memory of sockaddr_un if abstract socket #220 * Improving error messages #232 * Allow non-blocking file descriptors via setNonBlockIfNeeded #242 * Update config.{guess,sub} to latest version #244 * Rename my_inet_ntoa to avoid symbol conflicts #228 * Test infrastructure improvements #219 #217 #218 * House keeping and cleanup #238 #237 Version 2.6.3.1 * Reverse breaking exception change in Network.Socket.ByteString.recv #215 Version 2.6.3.0 * New maintainers: Evan Borden (@eborden) and Kazu Yamamoto (@kazu-yamamoto). The maintainer for a long period, Johan Tibell (@tibbe) stepped down. Thank you, Johan, for your hard work for a long time. * New APIs: ntohl, htonl,hostAddressToTuple{,6} and tupleToHostAddress{,6}. #210 * Added a Read instance for PortNumber. #145 * We only set the IPV6_V6ONLY flag to 0 for stream and datagram socket types, as opposed to all of them. This makes it possible to use ICMPv6. #180 #181 * Work around GHC bug #12020. Socket errors no longer cause segfaults or hangs on Windows. #192 * Various documentation improvements and the deprecated pragmas. #186 #201 #205 #206 #211 * Various internal improvements. #193 #200 Version 2.6.2.1 * Regenerate configure and HsNetworkConfig.h.in. * Better detection of CAN sockets. Version 2.6.2.0 * Add support for TCP_USER_TIMEOUT. * Don't conditionally export the SockAddr constructors. * Add isSupportSockAddr to allow checking for supported address types at runtime.
jperkin
pushed a commit
that referenced
this issue
Jan 3, 2020
1.1.11 * runResourceTChecked, which checks if any of the cleanup actions threw exceptions and, if so, rethrows them. NOTE This is probably a much better choice of function than runResourceT, and in the next major version release, will become the new behavior of runResourceT. 1.1.10 * Added MonadUnliftIO instances and UnliftIO.Resource 1.1.9 * Add generalized version of resourceForkIO 1.1.8.1 * Allocation actions should be masked 1.1.8 * Add instance MonadFix ResourceT #281 1.1.7.5 * Inline the tutorial from SoH 1.1.7.4 * Make test suite slightly more robust 1.1.7.3 * Doc tweak 1.1.7.2 * Remove upper bound on transformers #249 1.1.7.1 * transformers-compat 0.5 1.1.7 * Canonicalise Monad instances #237 1.1.6 * Safe/Trustworthy for resourcet #220 1.1.5 * Add pass-through instances for Alternative and MonadPlus #214 1.1.4.1 * Allow older exceptions version again 1.1.4 * Add MonadResource ExceptT instance #198 1.1.3.2 * monad-control-1.0 support #191
jperkin
pushed a commit
that referenced
this issue
Mar 11, 2020
Version 2.48.0 - The following is a summary of changes between 2.46.x and 2.48.0. For full details, please see the 2.47.x release notes below. - This release requires at least Rust 1.39. - #379 - New API, rsvg_handle_set_stylesheet(), to set a CSS stylesheet independent of the SVG document. - #510 - support opacity in patterns. - Librsvg's XML parser now supports namespaces (xmlns), and is stricter than before about it. Files may fail to parse if there are attributes or elements with namespace prefixes (e.g. foo:bar instead of plain bar), but without a corresponding namespace declaration (e.g. xmlns:foo="http://example.com/foo"). This may happen especially with incorrectly-written SVGs that use xlink:href or xi:include attributes without the corresponding namespace declarations. If you run into this, just add the following to your toplevel SVG element: <svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xi="http://www.w3.org/2001/XInclude"> ^^^^^^^^^ these ones - Librsvg no longer depends on libcroco, and now does all CSS processing using Rust crates from Mozilla Servo. As a result, librsvg can now handle much more complex CSS selectors than before. - Link-time optimization (LTO) is disabled by default on release builds, as this increased build time too much. Downstream distributors may want to turn it back on in the toplevel Cargo.toml. - #515 (CVE-2019-20446) - Librsvg now has limits on the number of loaded XML elements, and the number of referenced elements within an SVG document. This is to mitigate malicious SVGs which try to consume all memory, and those which try to consume an exponential amount of CPU time. - Many bugfixes; please see the 2.47.x release notes below. Version 2.47.4 - (#240) - Fix rsvg-convert's multipage PDF output when the zoom option is used (Sven Neumann). - (#547) - Do not stop rendering if an <image> element references a nonexistent file. This fixes a number of Open Clipart cases. - (#558) - Compute the font-size cascade correctly when there are "em" #and "ex" units involved. - Updated the man page for rsvg-convert (Sven Neumann). Version 2.47.3 - #379 - New API, rsvg_handle_set_stylesheet(), to set a CSS stylesheet independent of the SVG document. - #510 - support opacity in patterns (Sven Neumann). - Move away from the Cairo transform type to our own (Paolo Borelli). - Update the gtk-rs version. Version 2.47.2 - Handling of the "result", "in", "in2" attributes in filter primitives is slightly stricter now, and spec compliant. Their arguments must be of type CSS custom-ident, so "default", "inherit", "initial", and "unset" are disallowed. Most SVGs should still work fine. - #542 - Fix infinite loop when processing CSS sibling combinators. - #408 - feImage filters no longer clip their output to integer coordinates. - #504 - Documentation for the Rust crate (available at https://gnome.pages.gitlab.gnome.org/librsvg/doc/librsvg/) now has API usage examples. - Debug logs from RSVG_LOG=1 should now be more legible and contain better information on invalid CSS. - Remove link-time workarounds for Rust pre-1.35 (Kleis Auke Wolthuizen). - Unify internal error types to share the CSS code with gnome-shell. - Made handling of XML namespaces more spec-compliant. - Lots of refactoring to start moving away from Cairo internals (Paolo Borelli). Version 2.47.1 - Librsvg no longer depends on libcroco! It now does all CSS processing using Rust crates from Mozilla Servo; these are also the crates that are in use in recent versions of Firefox. As a result, librsvg can now handle much more complex CSS selectors than before. Fixes #79, #167, #237, #283, #336, #428, #441, #466, #525, #525 (Paolo Borelli, Federico Mena). Thanks to Evgeniy Reizner for fixing servo/servo#22972, which made it possible to use Servo's selectors crate. - #524 - Panic when reading an invalid stylesheet URL in an XML processing instruction (Paolo Borelli) - Lots of little improvements to the documentation. - Link-time optimization (LTO) is disabled by default on release builds, as this increased build time too much. Downstream distributors may want to turn it back on in the toplevel Cargo.toml. - We now have the start of documentation on the library's internals at https://gnome.pages.gitlab.gnome.org/librsvg/doc/rsvg_internals/index.html This should be interest of newcomers to librsvg's source code. Version 2.47.0 - Librsvg's XML parser now supports namespaces (xmlns), and is stricter than before about it. Files may fail to parse if there are attributes or elements with namespace prefixes (e.g. foo:bar instead of plain bar), but without a corresponding namespace declaration (e.g. xmlns:foo="http://example.com/foo"). This may happen especially with incorrectly-written SVGs that use xlink:href or xi:include attributes without the corresponding namespace declarations. If you run into this, just add the following to your toplevel SVG element: <svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xi="http://www.w3.org/2001/XInclude"> ^^^^^^^^^ these ones - Patterns and gradients reused across more than one element will only get resolved once now; this should make things marginally faster for patterns or gradients with fallbacks. - #515 (CVE-2019-20446) - Librsvg now has limits on the number of loaded XML elements, and the number of referenced elements within an SVG document. This is to mitigate malicious SVGs which try to consume all memory, and those which try to consume an exponential amount of CPU time. - #521 - Compute geometries correctly if there is a viewBox attribute. - #308 - Fix stack exhaustion with circular references in <use> elements. - Consistently use the LGPL 2.1 wherever it is mentioned. - Patterns and gradients reused across more than one element will only get resolved once now; this should make things marginally faster for patterns or gradients with fallbacks. - #506 - Fix empty patterns which reference a fallback pattern with children.
|
Fixed in TritonDataCenter/pkgsrc.smartos.org@ef33e10, thanks! |
Yw! |
|
Hi guys, there is a similar issue with OmniOS bloody where neither gpg2 nor gpg exists. Could this be? |
|
As the instructions say, this requires that gpg is installed on the host. This will differ depending on the illumos distribution you are using. |
|
@liv3010m Google "OmniOS gpg" to find the correct package for your OS. Then run the installation command with it, then then replace the |
|
Sorry I was to quick to post this. I'm already installing gpg! ;) |
No worries. Once you do that, everything should work. |
|
Yup, everything up right now. thanks! |
Yw! |
|
SmartOS uses gpg. It looks like this fix broke the instructions for SmartOS and SmartOS GZ. I'm running SmartOS 20200422. |
|
SmartOS does indeed ship with /usr/bin/gpg, but it is a very broken version, I'm surprised you even managed to make it work. As these instructions are more likely to apply to users coming from other distributions then, given we need to pick one, I'd rather pick the one more likely to be used. Anyone who is able to work around SmartOS's /usr/bin/gpg not being able to, for example, recv-keys, is probably able to account for the gpg2 vs gpg difference ;) |
|
I removed the "2" after searching and finding this github issue and it worked. So perhaps it is no longer as bad as you thought? I don't think you are being terribly objective here. Given that the "SmartOS/Illumos" page claims it has instructions for SmartOS and even a specific set of instructions for the "64-bit tools (SmartOS GZ)", I'm not sure that "they are smart enough to figure out that we misled them" is really a great place to leave this, especially on a Joyent page of all places. Is there some reason the page needs to shared? If so, can it not have two versions of the relevant lines documented instead of picking one? Can the explicit SmartOS GZ instructions not be correct? Maybe three tabs - one for Other Illumos, one for SmartOS Zones, and one for SmartOS Global Zone tools? |
As with nearly all open source projects, manpower is an issue. Maybe all that's needed is a note or table on which |
|
Ok, given that the GZ instructions are specific to that environment and unlikely to be used elsewhere I've switched just those back to Regarding Hopefully that's to everyone's satisfaction. |
|
OK. Thanks @jdrch and @jperkin |
jperkin
pushed a commit
that referenced
this issue
Sep 18, 2020
0.60: Asciidoc: * Introduce "compat" option to parse like asciidoc or asciidoctor. Text (and Markdown): * Fix the support of nested lists (GitHub's #131). Other: * Remove the experimental C extension that was never built, distributed, tested nor modified since 2007. XML: * Provide a meaningful message when the translators butcher the <placeholder> attributes instead of truncating the file. (GitHub's #254) 0.59.1: po4a tool: * Really fix --srcdir and --destdir handling (Debian's #960892 again). Even with the previous fix, the aptitude package was still broken. Documentation: * Clarify the syntax of -o parameters (GitHub's #233). Sgml: * Sort the attributes. Without this, msgids are randomly fuzzied. (Debian's #725931 and Debian's #810988) 0.59: po4a tool: * Fix --srcdir handling (GitHub's #237 and Debian's #960892). This bug was breaking the build of several packages, including dpkg. Addendum: * New mode 'eof' to easily add at the end of the file (Debian's #960949). Documentation: * Fix many typos and glitches * Start a section about external projects using po4a Tests: * po4a: Add a test for the [po_directory] feature Overall: * Improve the displayed messages, don't translate debug messages. 0.58.1: Documentation: * Document an option of the XML parser (GitHub's #223). * Small glitches found during the translations. Tests: * Also ignore 'Project-Id-Version' when diffing PO files (GitHub's #224) * asciidoc: reactivate tablecells tests AsciiDoc: * Fix management of images in tables (Github's #226) * Tolerate underline length variations in two lines titles (Github's #212) 0.58: AsciiDoc: * Accept numbered list items beginning with any number of dots (GitHub's #210) Markdown: * Avoid translating Markdown fenced code block info string (GitHub's #194) * List Markdown fenced code block info string as text type (GitHub's #195) * Support YAML Front Matter (GitHub's #196). This requires YAML::Tiny. * Introduce options yfm_keys and yfm_skip_array to respectively specify which YAML keys should be translated, and that the array content should not be translated. * Work around a bug in YAML::Tiny that quotes numbers (GitHub's #217) * Add gettext flag "markdown-text" for relevant entries (GitHub's #208) Text: * Honor the (existing) --neverwrap option to handle every content verbatim. Texinfo: * Add the comments starting with 'TRANSLATORS:' to the po file (GitHub's #162) XHTML: * Don't fail nor warn when a closing tag is missing, that's legit in HTML. (GitHub's #179) XML and DocBook: * Allow attributes with no value (GitHub's #178). * Processing Instructions are handled as inline tags by default, but you can change them back to breaking with '-o break-pi' (GitHub's #170) Yaml: * Introduce option to skip array values. (GitHub's #187) po4a tool: * Cleanups and fixups about options' parsing (now tested and documented) _ / \ You may need to upgrage your po4a.conf if you were using /_!_\ "unwanted features" (ie, bugs) of the previous implementation. * Do not touch source dir when --destdir is provided (Debian #602387) * Pass --add-location=file to msgmerge when receiving option porefs. (requires gettext >= 0.19 -- June 2014) * Option --master-charset sets the charset of the generated POT file. * Option --master-language sets the language of the generated POT file. * Add support for addendum path in po4a_paths (Debian #823189) * Stop pretending that --porefs can control the wrapping of reference comments, as the gettext tools used internally always rewrap them. Scripts: * Rename po4aman-display-po to po4a-display-man * Rename po4apod-display-po to po4a-display-pod Core: * Use UTF-8 by default (the 20th century is over -- Debian #862460) po4a used to prefer ascii unless it proved impossible. But the underlying detection would fail, possibly for document containing UTF-8 chars composed on printable ascii chars only. * Add a --wrap-po option to control how the po file is wrapped, and chose between either nicely wrapped files that tend to produce git conflicts, or ugly files that are easy to automatically deal with. Tests: * Completely refactor most tests. They are now more reliable and the error messages are much more useful to understand the issues. * Many bugs to po4a and the core were ironed out in the process. * PO files content are now tested too (GitHub's #67) Documentation: * Various cleanups by Golubev Alexander (GitHub's #190 & #191)
jperkin
pushed a commit
that referenced
this issue
Sep 21, 2020
2.0.3 (2020-08-22) ~~~~~~~~~~~~~~~~~~ - Fix issues when building re2c as a CMake subproject (`#302 <https://github.com/skvadrik/re2c/pull/302>`_: - Final corrections in the SIMPA article "RE2C: A lexer generator based on lookahead-TDFA", https://doi.org/10.1016/j.simpa.2020.100027 2.0.2 (2020-08-08) ~~~~~~~~~~~~~~~~~~ - Enable re2go building by default. - Package CMake files into release tarball. 2.0.1 (2020-07-29) ~~~~~~~~~~~~~~~~~~ - Updated version for CMake build system (forgotten in release 2.0). - Added a short article about re2c for the Software Impacts journal. 2.0 (2020-07-20) ~~~~~~~~~~~~~~~~ - Added new code generation backend for Go and a new ``re2go`` program (`#272 <https://github.com/skvadrik/re2c/issues/272>`_: Go support). Added option ``--lang <c | go>``. - Added CMake build system as an alternative to Autotools (`#275 <https://github.com/skvadrik/re2c/pull/275>`_: Add a CMake build system (thanks to ligfx), `#244 <https://github.com/skvadrik/re2c/issues/244>`_: Switching to CMake). - Changes in generic API: + Removed primitives ``YYSTAGPD`` and ``YYMTAGPD``. + Added primitives ``YYSHIFT``, ``YYSHIFTSTAG``, ``YYSHIFTMTAG`` that allow to express fixed tags in terms of generic API. + Added configurations ``re2c:api:style`` and ``re2c:api:sigil``. + Added named placeholders in interpolated configuration strings. - Changes in reuse mode (``-r, --reuse`` option): + Do not reset API-related configurations in each `use:re2c` block (`#291 <https://github.com/skvadrik/re2c/issues/291>`_: Defines in rules block are not propagated to use blocks). + Use block-local options instead of last block options. + Do not accumulate options from rules/reuse blocks in whole-program options. + Generate non-overlapping YYFILL labels for reuse blocks. + Generate start label for each reuse block in storable state mode. - Changes in start-conditions mode (``-c, --start-conditions`` option): + Allow to use normal (non-conditional) blocks in `-c` mode (`#263 <https://github.com/skvadrik/re2c/issues/263>`_: allow mixing conditional and non-conditional blocks with -c, `#296 <https://github.com/skvadrik/re2c/issues/296>`_: Conditions required for all lexers when using '-c' option). + Generate condition switch in every re2c block (`#295 <https://github.com/skvadrik/re2c/issues/295>`_: Condition switch generated for only one lexer per file). - Changes in the generated labels: + Use ``yyeof`` label prefix instead of ``yyeofrule``. + Use ``yyfill`` label prefix instead of ``yyFillLabel``. + Decouple start label and initial label (affects label numbering). - Removed undocumented configuration ``re2c:flags:o``, ``re2c:flags:output``. - Changes in ``re2c:flags:t``, ``re2c:flags:type-header`` configuration: filename is now relative to the output file directory. - Added option ``--case-ranges`` and configuration ``re2c:flags:case-ranges``. - Extended fixed tags optimization for the case of fixed-counter repetition. - Fixed bugs related to EOF rule: + `#276 <https://github.com/skvadrik/re2c/issues/276>`_: Example 01_fill.re in docs is broken + `#280 <https://github.com/skvadrik/re2c/issues/280>`_: EOF rules with multiple blocks + `#284 <https://github.com/skvadrik/re2c/issues/284>`_: mismatched YYBACKUP and YYRESTORE (Add missing fallback states with EOF rule) - Fixed miscellaneous bugs: + `#286 <https://github.com/skvadrik/re2c/issues/286>`_: Incorrect submatch values with fixed-length trailing context. + `#297 <https://github.com/skvadrik/re2c/issues/297>`_: configure error on ubuntu 18.04 / cmake 3.10 - Changed bootstrap process (require explicit configuration flags and a path to re2c executable to regenerate the lexers). - Added internal options ``--posix-prectable <naive | complex>``. - Added debug option ``--dump-dfa-tree``. - Major revision of the paper "Efficient POSIX submatch extraction on NFA". ---- 1.3x ---- 1.3 (2019-12-14) ~~~~~~~~~~~~~~~~ - Added option: ``--stadfa``. - Added warning: ``-Wsentinel-in-midrule``. - Added generic API primitives: + ``YYSTAGPD`` + ``YYMTAGPD`` - Added configurations: + ``re2c:sentinel = 0;`` + ``re2c:define:YYSTAGPD = "YYSTAGPD";`` + ``re2c:define:YYMTAGPD = "YYMTAGPD";`` - Worked on reproducible builds (`#258 <https://github.com/skvadrik/re2c/pull/258>`_: Make the build reproducible). ---- 1.2x ---- 1.2.1 (2019-08-11) ~~~~~~~~~~~~~~~~~~ - Fixed bug `#253 <https://github.com/skvadrik/re2c/issues/253>`_: re2c should install unicode_categories.re somewhere. - Fixed bug `#254 <https://github.com/skvadrik/re2c/issues/254>`_: Turn off re2c:eof = 0. 1.2 (2019-08-02) ~~~~~~~~~~~~~~~~ - Added EOF rule ``$`` and configuration ``re2c:eof``. - Added ``/*!include:re2c ... */`` directive and ``-I`` option. - Added ``/*!header:re2c:on*/`` and ``/*!header:re2c:off*/`` directives. - Added ``--input-encoding <ascii | utf8>`` option. + `#237 <https://github.com/skvadrik/re2c/issues/237>`_: Handle non-ASCII encoded characters in regular expressions + `#250 <https://github.com/skvadrik/re2c/issues/250>`_ UTF8 enoding - Added include file with a list of definitions for Unicode character classes. + `#235 <https://github.com/skvadrik/re2c/issues/235>`_: Unicode character classes - Added ``--location-format <gnu | msvc>`` option. + `#195 <https://github.com/skvadrik/re2c/issues/195>`_: Please consider using Gnu format for error messages - Added ``--verbose`` option that prints "success" message if re2c exits without errors. - Added configurations for options: + ``-o --output`` (specify output file) + ``-t --type-header`` (specify header file) - Removed configurations for internal/debug options. - Extended ``-r`` option: allow to mix multiple ``/*!rules:re2c*/``, ``/*!use:re2c*/`` and ``/*!re2c*/`` blocks. + `#55 <https://github.com/skvadrik/re2c/issues/55>`_: allow standard re2c blocks in reuse mode - Fixed ``-F --flex-support`` option: parsing and operator precedence. + `#229 <https://github.com/skvadrik/re2c/issues/229>`_: re2c option -F (flex syntax) broken + `#242 <https://github.com/skvadrik/re2c/issues/242>`_: Operator precedence with --flex-syntax is broken - Changed difference operator ``/`` to apply before encoding expansion of operands. + `#236 <https://github.com/skvadrik/re2c/issues/236>`_: Support range difference with variable-length encodings - Changed output generation of output file to be atomic. + `#245 <https://github.com/skvadrik/re2c/issues/245>`_: re2c output is not atomic - Authored research paper "Efficient POSIX Submatch Extraction on NFA" together with Dr Angelo Borsotti. - Added experimental libre2c library (``--enable-libs`` configure option) with the following algorithms: + TDFA with leftmost-greedy disambiguation + TDFA with POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with leftmost-greedy disambiguation + TNFA with POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with lazy POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with POSIX disambiguation (Kuklewicz algorithm) + TNFA with POSIX disambiguation (Cox algorithm) - Added debug subsystem (``--enable-debug`` configure option) and new debug options: + ``-dump-cfg`` (dump control flow graph of tag variables) + ``-dump-interf`` (dump interference table of tag variables) + ``-dump-closure-stats`` (dump epsilon-closure statistics) - Added internal options: + ``--posix-closure <gor1 | gtop>`` (switch between shortest-path algorithms used for the construction of POSIX closure) - Fixed a number of crashes found by American Fuzzy Lop fuzzer: + `#226 <https://github.com/skvadrik/re2c/issues/226>`_, `#227 <https://github.com/skvadrik/re2c/issues/227>`_, `#228 <https://github.com/skvadrik/re2c/issues/228>`_, `#231 <https://github.com/skvadrik/re2c/issues/231>`_, `#232 <https://github.com/skvadrik/re2c/issues/232>`_, `#233 <https://github.com/skvadrik/re2c/issues/233>`_, `#234 <https://github.com/skvadrik/re2c/issues/234>`_, `#238 <https://github.com/skvadrik/re2c/issues/238>`_ - Fixed handling of newlines: + correctly parse multi-character newlines CR LF in ``#line`` directives + consistently convert all newlines in the generated file to Unix-style LF - Changed default tarball format from .gz to .xz. + `#221 <https://github.com/skvadrik/re2c/issues/221>`_: big source tarball - Fixed a number of other bugs and resolved issues: + `#2 <https://github.com/skvadrik/re2c/issues/2>`_: abort + `#6 <https://github.com/skvadrik/re2c/issues/6>`_: segfault + `#10 <https://github.com/skvadrik/re2c/issues/10>`_: lessons/002_upn_calculator/calc_002 doesn't produce a useful example program + `#44 <https://github.com/skvadrik/re2c/issues/44>`_: Access violation when translating the attached file + `#49 <https://github.com/skvadrik/re2c/issues/49>`_: wildcard state \000 rules makes lexer behave weard + `#98 <https://github.com/skvadrik/re2c/issues/98>`_: Transparent handling of #line directives in input files + `#104 <https://github.com/skvadrik/re2c/issues/104>`_: Improve const-correctness + `#105 <https://github.com/skvadrik/re2c/issues/105>`_: Conversion of pointer parameters into references + `#114 <https://github.com/skvadrik/re2c/issues/114>`_: Possibility of fixing bug 2535084 + `#120 <https://github.com/skvadrik/re2c/issues/120>`_: condition consisting of default rule only is ignored + `#167 <https://github.com/skvadrik/re2c/issues/167>`_: Add word boundary support + `#168 <https://github.com/skvadrik/re2c/issues/168>`_: Wikipedia's article on re2c + `#180 <https://github.com/skvadrik/re2c/issues/180>`_: Comment syntax? + `#182 <https://github.com/skvadrik/re2c/issues/182>`_: yych being set by YYPEEK () and then not used + `#196 <https://github.com/skvadrik/re2c/issues/196>`_: Implicit type conversion warnings + `#198 <https://github.com/skvadrik/re2c/issues/198>`_: no match for ‘operator!=’ in ‘i != std::vector<_Tp, _Alloc>::rend() [with _Tp = re2c::bitmap_t, _Alloc = std::allocator<re2c::bitmap_t>]()’ + `#210 <https://github.com/skvadrik/re2c/issues/210>`_: How to build re2c in windows? + `#215 <https://github.com/skvadrik/re2c/issues/215>`_: A memory read overrun issue in s_to_n32_unsafe.cc + `#220 <https://github.com/skvadrik/re2c/issues/220>`_: src/dfa/dfa.h: simplify constructor to avoid g++-3.4 bug + `#223 <https://github.com/skvadrik/re2c/issues/223>`_: Fix typo + `#224 <https://github.com/skvadrik/re2c/issues/224>`_: src/dfa/closure_posix.cc: pack() tweaks + `#225 <https://github.com/skvadrik/re2c/issues/225>`_: Documentation link is broken in libre2c/README + `#230 <https://github.com/skvadrik/re2c/issues/230>`_: Changes for upcoming Travis' infra migration + `#239 <https://github.com/skvadrik/re2c/issues/239>`_: Push model example has wrong re2c invocation, breaks guide + `#241 <https://github.com/skvadrik/re2c/issues/241>`_: Guidance on how to use re2c for full-duplex command & response protocol + `#243 <https://github.com/skvadrik/re2c/issues/243>`_: A code generated for period (.) requires 4 bytes + `#246 <https://github.com/skvadrik/re2c/issues/246>`_: Please add a license to this repo + `#247 <https://github.com/skvadrik/re2c/issues/247>`_: Build failure on current Cygwin, probably caused by force-fed c++98 mode + `#248 <https://github.com/skvadrik/re2c/issues/248>`_: distcheck still looks for README + `#251 <https://github.com/skvadrik/re2c/issues/251>`_: Including what you use is find, but not without inclusion guards - Updated documentation and website.
jperkin
pushed a commit
that referenced
this issue
Oct 19, 2020
This notably fixes a security issue, CVE-2020-27197. Version 1.1.118: * #247 [CVE-2020-27197] Avoid SSRF on parsing XML (@orsinium) Version 1.1.117: * #244 SSL Verify Server not working correctly (@motok) (@nschwane) * #245 Unicode lxml.etree.SerialisationError on lxml 4.5.0+ (@advptr) Version 1.1.116: * #240 PY3 Compatibility changes for HTTP Response Body (@nschwane) Version 1.1.115: * #239 Convert the HTTP response body to a string type (PY3 this will be bytes) (@sddj) Version 1.1.114: * #237 Support converting dicts to content bindings (@danielsamuels) * #238 Provide XMLParser copies instead of reusing the cached instance. Prevents future messages to lose namespace Version 1.1.113: * #234 Add ability to load a configuration file when executing a script * #232 Fix TLS handshake failure when a server requires SNI (@marcelslotema) Version 1.1.112: * #227 Fixes to poll_client script (Python3 compatibility) * #226 Clean-up documentation warnings * #228 Fix 'HTTPMessage' has no attribute 'getheader' (Python3 compatibility) * #225 Fix checks that involve xpath (lxml) to prevent FutureWarning message * #230 Fix parsing status message round-trip (@danielsamuels) Thanks leot@ and pkgsrc's security team for the heads up! Pull-up to be requested.
jperkin
pushed a commit
that referenced
this issue
Nov 24, 2020
This release addresses the following:
New Features:
Add support for infostore in EnvIsSet Test case #240 (ThomasAdam)
Add variable/parameter which indicates the state of the FVWM3 logging #239 (NsCDE)
Support for setting default mouse cursor on all FvwmScript widgets #222 (NsCDE)
Add support for triangle indicator in/out sub options #221 (NsCDE)
Add WindowName option to FvwmButtons #219 (NsCDE)
Build problems:
compilation fails on openbsd-current due to safemalloc.h (va_list) #231
"version of go" misinterpreted by configure script? #202
Unable to build 1.0, bson.h not found [FreeBSD 12.1] #200
Bug-fixes:
_NET_WM_STATE was not updated for maximized windows #203
EwmhBaseStruts calculations don't use monitor's #241
DesktopConfiguration global inherits behaviour from per-monitor mode #236
FvwmEvent: missing monitor\_focus event #228
perllib: doesn't understand MX_MONITOR_* events #226
FvwmButtons subpanels not popped out on primary monitor when desk is > 0 #224
PositionPlacement Center: fix to use current screen #211
EwmhBaseStruts missing screen info from manpage #208
EwmhBaseStrut: fix calculations for per-monitor #242 (ThomasAdam)
Fix window locations in Global mode #237 (ThomasAdam)
jperkin
pushed a commit
that referenced
this issue
Jun 15, 2021
httpuv 1.6.1 ============ * The `timegm()` function is a non-standard GNU extension, so it has been replaced with an internal `timegm2()` function. (#300) httpuv 1.6.0 ============ * Remove BH dependency. httpuv now requires a compiler which supports C++11. (#297) httpuv 1.5.5 ============ * Fix SHA1 calculation, and thus WebSocket server handshakes, on big-endian systems. (#284) * Fixed #195: Responses required `headers` to be a named list. Now it can also be `NULL`, an empty unnamed list, or it can be unset. (#289) * Allow responses to omit `body` (or set it as `NULL`) to avoid sending a body or setting the `Content-Length` header. This is intended for use with HTTP 204/304 responses. (#288) httpuv 1.5.4 ============ * Fixed #275: Large HTTP request headers could get truncated if they spanned more than one TCP message. (#277) * Fixed build for Solaris. (#271) * Fixed a test that had incorrect logic. (#272) httpuv 1.5.3.1 ============== * Updated libuv to version 1.37.0. (#266) * Fixed #204: On UBSAN builds of R, there were warnings about unaligned memory access. (#246) * Avoid creating a new Rook error stream object for each request. This should improve performance. (#245) * Resolved #247: httpuv no longer returns a HTTP 400 code for static files when the "Content-Length" header is 0. This Content-Length header is inserted by some proxies even for messages without payloads. (#248) * Resolved #253: Setting the FRAMEWORK environment variable would break compilation. This change removes any dependency on that variable. (#254) httpuv 1.5.2 ============ * In the static file-serving code path, httpuv previously looked for a `Connection: upgrade` header; if it found this header, it would not try to serve a static file, and it would instead forward the HTTP request to the R code path. However, some proxies are configured to always set this header, even when the connection is not actually meant to be upgraded. Now, instead of looking for a `Connection: upgrade` header, httpuv looks for the presence of an `Upgrade` header (with any value), and should be more robust to incorrectly-configured proxies. (#215) * Fixed handling of messages without payloads: (#219) * Fixed #224: Static file serving on Windows did not work correctly if it was from a path that contained non-ASCII characters. (#227) * Resolved #194, #233: Added a `quiet` option to `startServer`, which suppresses startup error messages that are normally printed to console (and can't be intercepted with `capture.output()`). (#234) * Added a new function `randomPort()`, which returns a random available port for listening on. (#234) * Added a new (unexported) function `logLevel()`, for controlling debugging information that will be printed to the console. Previously, httpuv occasionally printed messages like `ERROR: [uv_write] broken pipe` and `ERROR: [uv_write] bad file descriptor` by default. This happened when the server tried to write to a pipe that was already closed, but the situation was not harmful, and was already being handled correctly. Now these messages are printed only if the log level is set to `INFO` or `DEBUG`. (#223) * If an application's `$call()` method is missing, it will now give a 404 response instead of a 500 response. (#237) * Disallowed backslash in static path, to prevent path traversal attacks. (#235) * Static file serving on Windows could fail if multiple requests accessed the same file simultaneously. (#239)
jperkin
pushed a commit
that referenced
this issue
Jul 1, 2021
Changes since v3.18: - Fixes a variable-font interpolation bug with Roman numeral eight. #382 - Fixes spacing of the latin epsilon glyph thanks to @hcsch. #377 - Adds new glyph U+25AA "blackSmallSquare" including calt mappings for case sensitivity. #373 - Removes U+20E3 "uni20E3" COMBINING ENCLOSING KEYCAP which triggers a bug in chromium, causing certain emoji to not render properly. #371 - Improvements to Roman numerals Changes since v3.17: - Adjusts vertical metrics metadata to that of v3.15 and older. This should fix any vertical alignment issues that might have occurred with v3.17. #361 - Fixes several issues with italics introduced by Glyphs 3 upgrade: - Fixes an issue with backslash in Italic masters. #362 - Fixes issues with afii10026 and uni0376 in italic masters - Fixes issue with italic q U+0071 by inlining the shape instead of using components. #360 - Fixes issue with U+035E COMBINING DOUBLE MACRON and U+20F0 COMBINING ASTERISK ABOVE in Thin Italic. #363 - Fixes positioning issue with U+0358 COMBINING DOT ABOVE RIGHT - Improvements to U+20DC COMBINING FOUR DOTS ABOVE and U+20DB COMBINING THREE DOTS ABOVE - Improvements to U+204E LOW ASTERISK - Improved positioning via mark anchors of combining glyphs U+20F0, U+035E and U+035F. #363 - Changes glyph shape of Latin upper-case iota. #359 - Improved glyph composition via ccmp for enclosed glyphs like U+0041,U+20DD. #335 Changes since v3.15: - Fixes issues with appearance in Microsoft Word. #352 (note that #156 is still unresolved although we have made some progress in v3.16 toward developing workarounds for certain printers.) - Fixes double grave interpolation issue. #317 - Fixes design issue with glyphs acutedblnosp, dblgravecmb, uni02F6 and uni02F5. #339 - Fixes missing or incorrect mark anchors in several turn* glyphs. #336 - Adds Baht currency glyph U+0E3F. #323 - Improvement to Latin iota (lower and upper case) glyphs. #340 - Improvement to some numerical fraction glyphs - Adds a dummy DSIG table to address issues with Microsoft Office 2003 and older - Improvements when using Inter with certain older Microsoft products by decomposing any nested components which some of that software has issues with - Addresses a major regression in v3.16 where several italic glyphs got messed up due to a Glyphs 3 version upgrade of the source file. This only affected users of v3.16 which was only released for about 12 hours before being replaced with this release v3.17. #360 Changes since v3.14: - Fixes an issue with the variable font, where some software would not list the various weights correctly. #308 - Fixes an issue with rendering on Windows with ClearType where some glyphs using advanced OpenType features (component transformations) would render incorrectly, with a slight vertical offset. #251 - Improvements to Elfdalian, improving the /yogonek and /eth glyphs #285 - Improvements to /eth U+00F0 glyph f7924a2#commitcomment-41610142 Changes since v3.13: - Fixes position of ring at bottom of /Aringbelow U+1E00. #266 - Fixes interpolation issues with /omegatitlocyrillic /omega and /pisymbolgreek. #272 - Fixes an issue with /dotmacroncomb.cn used by glyphs like /Adotmacron. #298 - Adds /bitcoin glyph U+20BF. #284 - Adds /insertionsymbol U+2380. #290 - Adds specialized glyphs /Aringogonek, /aringogonek, /Yogonek and /yogonek to fully support Elfdalian script. #285 - Adds U+EE01, a vertically-centered colon used by Android on the lock screen #212 - Improves kerning of /quotedblright,/quoteright and /period,/comma. #299 - Improves design of "Theta" U+03F4, U+0398 and "Fita" U+0472, U+0473. #263, #264 - Improves design of /yhook and use /ucyrillic in /Ukcyrillic /ukcyrillic. #273 - Improves design of /dzaltone and /dzcurl. #268 - Improves design of /percent, /perthousand and /pertenthousand glyphs. #237 - Improves variable-font metadata (STAT table). #265 - Improves (tunes) calt case substitutions, e.g. "x -X". #251 - Changes codepoint mapping of /q.sups from U+146B to private-area U+E163. #275 Changes since v3.12: - Improvements to Greek and Cyrillic glyphs #240 - New stylistic set ss04 which is almost identical to ss02 with the exception of no slashed zero #252 - Fixes interpolation issues with several diacritics in the light weights #257 - Removes codepoint mappings for some math-related enclosed glyphs that would be too large when using the circle-enclosed glyphs #250 - Various improvements and adjustments to glyph shapes, spacing and kerning - Improves OpenType feature name metadata Changes since v3.11: - This release includes major improvements Thin, Light and ExtraLight styles (including italic counterparts) incorporating months of work by @KatjaSchimmel
jperkin
pushed a commit
that referenced
this issue
Aug 25, 2021
# rvest 1.0.1 * `html_table()` correctly handles tables with cells that contain blank values for `rowspan` and/or `colspan`, so that e.g. `<td rowspan="">` is parsed as `<td rowspan=1>` (@epiben, #323). * Fix broken example # rvest 1.0.0 ## New features * New `html_text2()` provides a more natural rendering of HTML nodes into text, converting `<br>` into "\n", and removing non-significant whitespace (#175). By default, it also converts ` ` into regular spaces, which you can suppress with `preserve_nbsp = TRUE` (#284). * `html_table()` has been re-written from scratch to more closely mimic the algorithm that browsers use for parsing tables. This should mean that there are far fewer tables for which it fails to produce some output (#63, #204, #215). The `fill` argument has been deprecated since it is no longer needed. `html_table()` now returns a tibble rather than a data frame to be compatible with the rest of the tidyverse (#199). Its performance has been considerably improved (#237). It also gains a `na.strings` argument to control what values are converted to `NA` (#107), and a `convert` argument to control whether to run the conversion (#311). * New `html_form_submit()` allows you to submit a form directly, without needing to create a session (#300). * rvest is now licensed as MIT (#287). ## API changes Since this is the 1.0.0 release, I included a large number of API changes to make rvest more compatible with current tidyverse conventions. Older functions have been deprecated, so existing code will continue to work (albeit with a few new warnings). * rvest now imports xml2 rather than depending on it. This is cleaner because it avoids attaching all the xml2 functions that you're less likely to use. To reduce the change of breakages, rvest re-exports xml2 functions `read_html()` and `url_absolute()`, but your code may now need an explicit `library(xml2)`. * `html_form()` now returns an object with class `rvest_form` (instead of form). Fields within a form now have class `rvest_field`, instead of a variety of classes that were lacking the `rvest_` prefix. All functions for working with forms have a common `html_form_` prefix: `set_values()` became `html_form_set()`. `submit_form()` was renamed to `session_submit()` because it returns a session. * `html_node()` and `html_nodes()` have been superseded in favor of `html_element()` and `html_elements()` since they (almost) always return elements, not nodes (#298). * `html_session()` is now `session()` and returns an object of class `rvest_session` (instead of `session`). All functions that work with session objects now have a common `session_` prefix. * Long deprecated `html()`, `html_tag()`, `xml()` functions have been removed. * `minimal_html()` (which doesn't appear to be used by any other package) has had its arguments flipped to make it more intuitive. * `guess_encoding()` has been renamed to `html_encoding_guess()` to avoid a clash with `stringr::guess_encoding()` (#209). `repair_encoding()` has been deprecated because it doesn't appear to work. * `pluck()` is no longer exported to avoid a clash with `purrr::pluck()`; if you need it use `purrr::map_chr()` and friends instead (#209). * `xml_tag()`, `xml_node()`, and `xml_nodes()` have been formally deprecated in favor of their `html_` equivalents. ## Minor improvements and bug fixes * The "harvesting the web" vignette has been rewritten to focus more on basics rvest, eliminating the screenshots to keep the installed package as svelte as possible. It's also been renamed to `vignette("rvest")` since it's the vignette that you should read first. * The SelectorGadget vignette is now a web-only article, <https://rvest.tidyverse.org/articles/articles/selectorgadget.html>, so we can be more generous with screenshots since they're no longer bundled with every install of the package. Together with the rewrite of the other vignette, this means that rvest is now ~90 Kb instead of ~1.1 Mb. * All uses of IMDB have been eliminated since the site explicitly prohibits scraping (#195). * `session_submit()` errors if `form` doesn't have a `url` (#288). * New `session_forward()` function to complement `session_back()`. It now allows you to pick the submission button by position (#156). The `...` argument is deprecated; please use `config` instead. * `html_form_set()` can now accept character vectors allowing you to select multiple checkboxes in a set or select multiple values from a multi-`<select>` (#127, with help from @juba). It also uses dynamic dots so that you can use `!!!` if you have a list of values (#189). # rvest 0.3.6 * Remove failing example
jperkin
pushed a commit
that referenced
this issue
Apr 19, 2022
# glue 1.6.2 * Modify a test for better forward compatibility with R. # glue 1.6.1 * Glue Now registers its custom knitr engines in a way that is more robust to namespace-loading edge cases that can arise during package installation (#254). # glue 1.6.0 * `glue()`, `glue_data()`, `glue_col()`, and `glue_data_col()` gain a new `.literal` argument, which controls how quotes and the comment character are treated when parsing the expression string (#235). This is mostly useful when using a custom transformer. * Trailing whitespace-only lines don't interfere with indentation (#247). # glue 1.5.1 * Jennifer Bryan is now the maintainer. * The existing custom language engines for knitr, `glue` and `glue_sql`, are documented in a new vignette (#71). *Detail added after release: glue now sets up registration of these engines in `.onLoad()`.* * `glue_col()` gives special treatment to styling functions from the crayon package, e.g. `glue_col("{blue foo}")` "just works" now, even if crayon is not attached (but is installed) (#241). * Unterminated backticks trigger the same error as unterminated single or double quotes (#237). * `glue_sql()` collapses zero-length `DBI::SQL` object into `DBI::SQL("NULL")` (#244 @shrektan). # glue 1.5.0 ## Breaking changes * Long deprecated function `collapse()` has been removed (#213) ## New functions and arguments * New `glue_sql_collapse()` function to collapse inputs and return a `DBI::SQL()` object (#103). * `glue()` gains a new `.comment` argument, to control the comment character (#193). * `glue()` gains a new `.null` argument, to control the value to replace `NULL` values with (#217, @echasnovski). ## Bugfixes and minor changes * `sql_quote_transformer()` is now allows whitespace after the trailing `*` (#218). * `compare_proxy.glue()` method defined so glue objects can be compared to strings in testthat 3e without errors (#212) * `print.glue()` no longer prints an empty newline for 0 length inputs (#214) * Unterminated comments in glue expression now throw an error (#227, @gaborcsardi) * Unterminated quotes in glue expressions now throw an error (#226, @gaborcsardi)
jperkin
pushed a commit
that referenced
this issue
May 1, 2022
# cpp11 0.4.2 * Romain François is now the maintainer. # cpp11 0.4.1 * Fix crash related to unwind protect optimization (#244) # cpp11 0.4.0 ## New Features * New opt-in message formatting with the {fmt} C++ library for `cpp11::messages()` `cpp11::stop()` and `cpp11::warning()`. Set the `CPP11_USE_FMT` macro to use this feature in your package. (@sbearrows, #169, #208) * New `as_double()` and `as_integer()` methods to coerce integers to doubles and doubles to integers to doubles (@sbearrows, #46) * `cpp11::matrix` iterators can now be used either row-wise or column-wise (the default) depending on the user's choice (@alyst, #229) ## Improvements and fixes * Read-only matrix accessors are now marked const (#234) * `writable::r_vector` default constructors now return a 0 length vector when converted to `SEXP` (#166) * Read-only `r_vector` constructors now disallow implicit construction with named arguments (#237) * Read-only `r_vector.attr()` methods now return const objects, so it is a compile time error to try to assign to them (#237) * Fixed `+` and `+=` operators of `r_vector::[const_]iterator` to conform the *iterators* concept: `+=` updates the iterator, and `+` returns the updated copy, while keeping the original unchanged (@alyst, #231) * Remove undefined behavior when constructing global `cpp11::sexp`s (#224) * Removed redundant `.Call calls` in cpp11.cpp file (@sbearrows, #170) * Error messages now output original file name rather than the temporary file name (@sbearrows, #194) * `cpp_register()` now includes `attribute_visible` in the init function, so packages compiled with `C_VISIBILITY` will find the init function. * Fixed bug when running `cpp_source()` on the same file more than once (@sbearrows, #202) * Allow cpp11 decorators of the form `cpp11::linking_to` (@sbearrows, #193) * Removed internal instances of `cpp11::stop()` and replaced with C++ exceptions (@sbearrows, #203) * Names of named lists are now resized along with the list elements (@sbearrows, #206)
gco
pushed a commit
to gco/pkgsrc
that referenced
this issue
Sep 11, 2022
pkgsrc change: remove one pkglint warning. 2.3.1 (2022-05-24) Bug Fixes - logging hangs on JRuby when the stdout appender is closed [PR TritonDataCenter#237] - initialize the Logging framework when a Filter is created [PR TritonDataCenter#238]
jperkin
pushed a commit
that referenced
this issue
Jan 12, 2023
ChangeLog: Version 1.45 - shows a rotating cursor in search dialog - update build scripts to autoconf 2.71 and automake 1.16.5 (for Ubuntu 22.04) - removed the intl directory and allow to build Xfe with external gettext - fixed problem of wrong panel sizes when switching from vertical to horizontal panels - beautified code using uncrustify - added a new root authentication mode using pkexec (to use it, the pkexec package must be installed on the system) and also added the associated policy file org.xfe.root.policy - fixed the problem of opening too many windows when selected items have different associations (bug #254) - added a timeout parameter for mount point not responding mechanism - fixed the mechanism that detects mount points that are not responding - added cifs to file system mounts that are checked for up / down state - fixed the problem that links to executable text file are executed when the "Don't execute text files" option is enabled (bug #264) - select image in XFileImage (xfi) file list when opening an image file (bug #262) - fixed the failing 'make check' (bug #257) - updated xferc.in with .json and .policy file types - fixed imprecise error message when attempting to create a folder and a file/folder with the same name already exists - added Dark color theme - added new menu item "Copy name(s)" (shortcut Ctrl-Shift-N) to allow copying file names (without path) to clipboard - removed deprecated register directive - updated brazilian portuguese translation (thanks to Vinicius <[email protected]>> - updated russian translation (thanks to Bogdan V. Kilin <[email protected]>) - updated czech translation (thanks to David Vachulka <[email protected]> - fixed a regression that broke the "Save as" operation in Xfw - try to show Xfe window later to avoid black transient window - disabled the hassubdir() function because it is too slow on network drives Version 1.44 (released 14/03/2021) - fixed segmentation fault when Xfe can't find the default xferc (bug #255) - removed CDE color theme and renamed GNOME2 and KDE3 color themes to GNOME and KDE - refreshed default, gnome, kde and xfce icon themes and removed old tango, windows, xfe and gnomeblue icon themes - switched arrange by row and arranged by columns in icon lists - enter target directory in root mode, when invoked from an error message - updated Gnome icons for LibreOffice / OpenOffice documents - fixed loss of data in full disk partition with xfw (bug #245) - fixed copy/paste between xfe windows requires source window to be open (bug #247) - fixed wrong position of the '(copy)' suffix when a folder name contains a dot - fixed root mode not working in FreeBSD (bug #237) - fixed unzip not working in FreeBSD (bug #236) - fixed window & icon title wrong when path contains hidden directory (bug #243) - updated Catalan translation (thanks to Pere Orga <[email protected]>) - updated Turkish translation (thanks to yaşar çiv <[email protected]>) - fixed a compilation warning with gcc 8 in Properties.cpp - set focus to main window when closing command window, help or search dialog - updated documentation to add instructions for HiDPI support - changed the hand cursor to a more modern shape - implemented HiDPI support and added the Edit / Preferences / Appearance / DPI option that allows to manually set the screen resolution. For a Ultra HD monitor (4K), a value of 200 - 240 dpi should be fine - renamed Edit / Preferences / Themes to Edit / Preferences / Appearance - vertically centered toolbar buttons in Xfe, Xfi, Xfp and Xfw - execution of text files (e.g. script shells) do not support startup notification - implemented custom sudo/su commands - fixed the wrong number of selected files/folders in file panels - added an option to prevent the execution of text files - it is now possible to open/view multiple files in single click mode - fixed the middle mouson button view command in single click mode - changed st terminal name to "Xfe" - upgraded st terminal to version 0.8.2
jperkin
pushed a commit
that referenced
this issue
Feb 21, 2023
pkgsrc change: avoid use empty in options.mk. What's new in Sudo 1.9.13 (2023-02-14) * Fixed a bug running relative commands via sudo when "log_subcmds" is enabled. GitHub issue #194. * Fixed a signal handling bug when running sudo commands in a shell script. Signals were not being forwarded to the command when the sudo process was not run in its own process group. * Fixed a bug in cvtsudoers' LDIF parsing when the file ends without a newline and a backslash is the last character of the file. * Fixed a potential use-after-free bug with cvtsudoers filtering. GitHub issue #198. * Added a reminder to the default lecture that the password will not echo. This line is only displayed when the pwfeedback option is disabled. GitHub issue #195. * Fixed potential memory leaks in error paths. GitHub issues #199, #202. * Fixed potential NULL dereferences on memory allocation failure. GitHub issues #204, #211. * Sudo now uses C23-style attributes in function prototypes instead of gcc-style attributes if supported. * Added a new "list" pseudo-command in sudoers to allow a user to list another user's privileges. Previously, only root or a user with the ability to run any command as either root or the target user on the current host could use the -U option. This also includes a fix to the log entry when a user lacks permission to run "sudo -U otheruser -l command". Previously, the logs would indicate that the user tried to run the actual command, now the log entry includes the list operation. * JSON logging now escapes control characters if they happen to appear in the command or environment. * New Albanian translation from translationproject.org. * Regular expressions in sudoers or logsrvd.conf may no longer contain consecutive repetition operators. This is implementation- specific behavior according to POSIX, but some implementations will allocate excessive amounts of memory. This mainly affects the fuzzers. * Sudo now builds AIX-style shared libraries and dynamic shared objects by default instead of svr4-style. This means that the default sudo plugins are now .a (archive) files that contain a .so shared object file instead of bare .so files. This was done to improve compatibility with the AIX Freeware ecosystem, specifically, the AIX Freeware build of OpenSSL. Sudo will still load svr4-style .so plugins and if a .so file is requested, either via sudo.conf or the sudoers file, and only the .a file is present, sudo will convert the path from plugin.so to plugin.a(plugin.so) when loading it. This ensures compatibility with existing configurations. To restore the old, pre-1.9.13 behavior, run configure using the --with-aix-soname=svr4 option. * Sudo no longer checks the ownership and mode of the plugins that it loads. Plugins are configured via either the sudo.conf or sudoers file which are trusted configuration files. These checks suffered from time-of-check vs. time-of-use race conditions and complicate loading plugins that are not simple paths. Ownership and mode checks are still performed when loading the sudo.conf and sudoers files, which do not suffer from race conditions. The sudo.conf "developer_mode" setting is no longer used. * Control characters in sudo log messages and "sudoreplay -l" output are now escaped in octal format. Space characters in the command path are also escaped. Command line arguments that contain spaces are surrounded by single quotes and any literal single quote or backslash characters are escaped with a backslash. This makes it possible to distinguish multiple command line arguments from a single argument that contains spaces. * Improved support for DragonFly BSD which uses a different struct procinfo than either FreeBSD or 4.4BSD. * Fixed a compilation error on Linux arm systems running older kernels that may not define EM_ARM in linux/elf-em.h. GitHub issue #232. * Fixed a compilation error when LDFLAGS contains -Wl,--no-undefined. Sudo will now link using -Wl,--no-undefined by default if possible. GitHub issue #234. * Fixed a bug executing a command with a very long argument vector when "log_subcmds" or "intercept" is enabled on a system where "intercept_type" is set to "trace". GitHub issue #194. * When sudo is configured to run a command in a pseudo-terminal but the standard input is not connected to a terminal, the command will now be run as a background process. This works around a problem running sudo commands in the background from a shell script where changing the terminal to raw mode could interfere with the interactive shell that ran the script. GitHub issue #237. * A missing include file in sudoers is no longer a fatal error unless the error_recovery plugin argument has been set to false. What's new in Sudo 1.9.13p1 (2023-02-17) * Fixed a typo in the configure script that resulted in a line like "]: command not found" in the output. GitHub issue #238. * Corrected the order of the C23 [[noreturn]] attribute in function prototypes. This fixes a build error with GCC 13. GitHub issue #239. * The "check" make target misbehaved when there was more than one version of the UTF-8 C locale in the output of "locale -a". GitHub issue #241. * Removed a dependency on the AC_SYS_YEAR2038 macro in configure.ac. This was added in autoconf 2.72 but sudo's configure.ac only required autoconf 2.70. * Relaxed the autoconf version requirement to version 2.69.
jperkin
pushed a commit
that referenced
this issue
Jun 21, 2023
pkgsrc change: avoid use empty in options.mk. What's new in Sudo 1.9.13 (2023-02-14) * Fixed a bug running relative commands via sudo when "log_subcmds" is enabled. GitHub issue #194. * Fixed a signal handling bug when running sudo commands in a shell script. Signals were not being forwarded to the command when the sudo process was not run in its own process group. * Fixed a bug in cvtsudoers' LDIF parsing when the file ends without a newline and a backslash is the last character of the file. * Fixed a potential use-after-free bug with cvtsudoers filtering. GitHub issue #198. * Added a reminder to the default lecture that the password will not echo. This line is only displayed when the pwfeedback option is disabled. GitHub issue #195. * Fixed potential memory leaks in error paths. GitHub issues #199, #202. * Fixed potential NULL dereferences on memory allocation failure. GitHub issues #204, #211. * Sudo now uses C23-style attributes in function prototypes instead of gcc-style attributes if supported. * Added a new "list" pseudo-command in sudoers to allow a user to list another user's privileges. Previously, only root or a user with the ability to run any command as either root or the target user on the current host could use the -U option. This also includes a fix to the log entry when a user lacks permission to run "sudo -U otheruser -l command". Previously, the logs would indicate that the user tried to run the actual command, now the log entry includes the list operation. * JSON logging now escapes control characters if they happen to appear in the command or environment. * New Albanian translation from translationproject.org. * Regular expressions in sudoers or logsrvd.conf may no longer contain consecutive repetition operators. This is implementation- specific behavior according to POSIX, but some implementations will allocate excessive amounts of memory. This mainly affects the fuzzers. * Sudo now builds AIX-style shared libraries and dynamic shared objects by default instead of svr4-style. This means that the default sudo plugins are now .a (archive) files that contain a .so shared object file instead of bare .so files. This was done to improve compatibility with the AIX Freeware ecosystem, specifically, the AIX Freeware build of OpenSSL. Sudo will still load svr4-style .so plugins and if a .so file is requested, either via sudo.conf or the sudoers file, and only the .a file is present, sudo will convert the path from plugin.so to plugin.a(plugin.so) when loading it. This ensures compatibility with existing configurations. To restore the old, pre-1.9.13 behavior, run configure using the --with-aix-soname=svr4 option. * Sudo no longer checks the ownership and mode of the plugins that it loads. Plugins are configured via either the sudo.conf or sudoers file which are trusted configuration files. These checks suffered from time-of-check vs. time-of-use race conditions and complicate loading plugins that are not simple paths. Ownership and mode checks are still performed when loading the sudo.conf and sudoers files, which do not suffer from race conditions. The sudo.conf "developer_mode" setting is no longer used. * Control characters in sudo log messages and "sudoreplay -l" output are now escaped in octal format. Space characters in the command path are also escaped. Command line arguments that contain spaces are surrounded by single quotes and any literal single quote or backslash characters are escaped with a backslash. This makes it possible to distinguish multiple command line arguments from a single argument that contains spaces. * Improved support for DragonFly BSD which uses a different struct procinfo than either FreeBSD or 4.4BSD. * Fixed a compilation error on Linux arm systems running older kernels that may not define EM_ARM in linux/elf-em.h. GitHub issue #232. * Fixed a compilation error when LDFLAGS contains -Wl,--no-undefined. Sudo will now link using -Wl,--no-undefined by default if possible. GitHub issue #234. * Fixed a bug executing a command with a very long argument vector when "log_subcmds" or "intercept" is enabled on a system where "intercept_type" is set to "trace". GitHub issue #194. * When sudo is configured to run a command in a pseudo-terminal but the standard input is not connected to a terminal, the command will now be run as a background process. This works around a problem running sudo commands in the background from a shell script where changing the terminal to raw mode could interfere with the interactive shell that ran the script. GitHub issue #237. * A missing include file in sudoers is no longer a fatal error unless the error_recovery plugin argument has been set to false. What's new in Sudo 1.9.13p1 (2023-02-17) * Fixed a typo in the configure script that resulted in a line like "]: command not found" in the output. GitHub issue #238. * Corrected the order of the C23 [[noreturn]] attribute in function prototypes. This fixes a build error with GCC 13. GitHub issue #239. * The "check" make target misbehaved when there was more than one version of the UTF-8 C locale in the output of "locale -a". GitHub issue #241. * Removed a dependency on the AC_SYS_YEAR2038 macro in configure.ac. This was added in autoconf 2.72 but sudo's configure.ac only required autoconf 2.70. * Relaxed the autoconf version requirement to version 2.69.
jperkin
pushed a commit
that referenced
this issue
Aug 8, 2023
(also taking over maintainership after confirming with Patrick)
v.2.4.3
Add static hpdf_version.h header by @vszakats in #241
hpdf_version.h included again by hpdf.h #241 #246
File attachment issue resolved @hvanbrug #159
Renamed *_LIBZ defines to _*ZLIB, thanks to @karstenBriksoft #249, enables compression of PDF files again.
v.2.4.2
Reinstated hpdf_version.h #237 #240
v.2.4.1
Fixed library name #236 from @jschueller
Set correct version number #237 pointed out by @xantares
v.2.4.0
Add support for free-form triangle shading objects. by @allisonvacanti in #157
Fix config constant to match use in hpdf_mmgr.c by @bvirlet in #167
Improve small number writing in HPDF_FToA. by @allisonvacanti in #187
Fix missing /CapHeight key in font definition by @yabaud in #138
Change HPDF_Page_CreateXObjectFromImage zoom parameter type to HPDF… by @extensia in #114
Fix another case of png files with background mask save uncompressed by @igor-niv in #221
Avoid issue with libtiff duplicate symbols by @bvirlet in #168
Reajust bit_depth of png image after striping depth from 16 to 8. by @joelhecht in #125
Fixed typo in Japanese font name: Mincyo -> Mincho by @qtamaki in #80
Fix various typos by @luzpaz in #226
hpdf.h: add missing HPDF_Boolean typedef by @mathstuf in #189
Moved to a CMake only build environment.
Fix bad unicode in comment by @gix in #229
Fix various typos by @luzpaz in #230
jperkin
pushed a commit
that referenced
this issue
Oct 23, 2023
This is the biggest update ever, with 36 new features, 24 bug fixes,
and 3 performance improvements.
Thank you to every contributor for making Yazi better and better!
What's Changed
feat: add Mintty (Git Bash) image preview support by @sxyazi in #103
refactor: use Url instead of PathBuf by @sxyazi in #107
fix: mime of javascript by @XYenon in #106
perf: load large folders in chunks by @sxyazi in #117
fix: set cursor block after closing input prompt from insert mode
by @auvred in #109
fix: doesn't redirect the stderr of the clipboard command to null
by @sxyazi in #119
feat: suspend process (Ctrl-Z) by @sxyazi in #120
fix: notification of file changes in linked directories by @sxyazi in #121
feat: file size sorting under the simplified file system by @sxyazi in #123
fix: show_hidden not properly applied to hovered folder by @sxyazi in #124
fix: recognize symlink directories as files by @sxyazi in #125
fix: respect symlink paths without canonicalizing them by @sxyazi in #126
feat: make Input streamable by @sxyazi in #127
perf: doesn't wait for the process of killing by @sxyazi in #128
feat: find by @sxyazi in #104
feat: tab-specific sorting by @sxyazi in #131
feat: new V, D, C keybinding for Input component by @sxyazi in #139
fix: swap description for search commands by @knutwalker in #141
fix: image position calculation by @sxyazi in #144
feat: support for image preview within tmux by @sxyazi in #147
feat: show keywords when in search mode by @sxyazi in #152
feat: fallback to built-in highlighting if jq is not installed
by @ndtoan96 in #151
feat: make the glob expr case insensitive by default, and prepend \s to
make it sensitive by @sxyazi in #156
fix: check relative path on expand_path by @sxyazi in #165
feat: support for FreeBSD permission type by @yggdr in #169
feat: multiple openers for a single rule by @Linus789 in #154
fix: leave upwards only if an IO error occurs in current by @sxyazi in #172
docs: add archlinuxcn installation guide by @Integral-Tech in #176
fix: image preview not working on Zellij by @Eric-Song-Nop in #181
feat: make trash optional by @sxyazi in #178
fix: inconsistent Shift key behavior on Unix and Windows
by @ndtoan96 in #174
feat: new force option added for the remove command, which does not show
the confirmation dialog on trashing/deleting by @sxyazi in #173
fix: typo of LICENSE file by @conradojordan in #201
feat: add flake.nix by @XYenon in #205
feat: include ignored files on search when hidden files are shown
by @PhotonQuantum in #212
feat: new orphan option for opener rules, to keep the process running even
when Yazi exited by @sxyazi in #216
feat: scroll half/full page with arrow percentage supported, and new
Vi-like <C-u>, <C-d>, <C-b>, and <C-f> keybindings added by
@TD-Sky in #213
feat: highlight matching words on finding by @PhotonQuantum in #211
feat: add BackTab support by @sxyazi in #209
fix: set stdio to null when orphan is true by @sxyazi in #229
feat: new force option for creating and renaming by @sxyazi in #208
feat: loop through to find by @ndtoan96 in #234
feat: backward/forward by @ndtoan96 in #230
perf: reimplement optimized natural sorting algorithm, speed up ~6 times
for case-insensitive sorting by @sxyazi in #237
chore: changing the finding key to n/N to keep with Vim's conventions
by @sxyazi in #238
feat: added new options to the `find' command for smart-case/
case-insensitive finds by @ndtoan96 in #240
feat: add new --no-cwd-file option to quit command for flexible cwd-file
setting by @XOR-op in #245
fix: avoid adding non-regular paths to backstack by @ndtoan96 in #249
fix: support RGBA16 images by @sxyazi in #250
feat: support trash for NetBSD by @sxyazi in #251
feat: support environment variable in cd path by @ndtoan96 in #241
feat: new theme system by @sxyazi in #161
fix: cannot cd if there is whitespace in path by @ndtoan96 in #255
fix: add application/x-wine-extension-ini to text mime by @ndtoan96 in #259
fix: collect and fix all hard coded themes and color
by @Eric-Song-Nop in #221
fix: some colors not readable in light mode by @sxyazi in #264
feat: better file hover state by @sxyazi in #269
refactor: split commands into separate files by @sxyazi in #272
feat: cancel selected items automatically on entering, leaving, copying, or
cutting by @sxyazi in #273
feat: add a new Bar component, and make border styles customizable
by @sxyazi in #278
fix: adapt another $TERM value of foot-extra for foot by @sxyazi in #277
refactor: simplify building conditions by @sxyazi in #280
chore: add git rev to nix pkg version by @XYenon in #206
feat: new Manager component for better style extensions by @sxyazi in #284
feat: cross-system opener rule support by @sxyazi in #289
fix: delegate the SIGINT signal of processes with orphan=true to their
parent by @sxyazi in #290
feat: line mode by @sxyazi in #291
feat: shell completions & auto releasing by @TD-Sky in #282
jperkin
pushed a commit
that referenced
this issue
Nov 6, 2023
Overview of changes in gnome-calculator 45.0.1
* Retagging release
Overview of changes in gnome-calculator 45.0
* Search provider performance improvements !154, !155, !156 (Christian Hergert)
* Use numeric font instead of monospace #290 (Robert Roth)
* Fixed electron-volt unit abbreviation #347 (Robert Roth)
* Fixed erroneous Joule unit name #348 (Robert Roth)
* Fixed missing build dependency !157 (Jeremy Bicha)
Overview of changes in gnome-calculator 45.beta
* Fixed variable and function popover reverse typing #335, #320 (Robert Roth)
* Better left/right cursor key handling !153 (Seth Falco)
* Improved toolbar using Adwaita library !151 (Felipe Kinoshita)
* Flatpak build improvements (Robert Roth)
Overview of changes in gnome-calculator 45.alpha
* Remember window size #328 !146 (Leonard K, Alice Mikhaylenko)
* Allow opening Main Menu by pressing F10 !142 !149 (Automeris naranja)
* Extend bit-shifting limit #306 !143 (J Sory)
* Added new energy units !143 (J Sory)
* Added TWD support via Bank of Canada rates #27 !148 (Mário Adriano)
* Added legal section for exchange rate source attribution (Robert Roth)
* Added United Nations Treasury exchange rate datasource (Robert Roth)
* Added Jamaican Dollar currency #291 (Robert Roth)
* Added Ukrainian hryvnia currency #278 (Robert Roth)
* Added Nigerian Naira currency #142 (Robert Roth)
* Changed symbolic icon to C on the clear button #336 (Robert Roth)
* Dropped VEF currency support #78 (Robert Roth)
* Use new vala-nightly SDK extension for flatpak (Robert Roth)
Overview of changes in gnome-calculator 44.beta
* Improved factorization !141 (J. Sory)
* Number format selection documentation improvements #321 (Robert Roth)
* Made builtin function descriptions translatable #323 (Robert Roth)
* Fixed display showing 0 on startup #318 (Robert Roth)
* Improved button tooltips !132 (sunflowerskater)
* Added signed int support to programming mode !110 (Erik Wolf)
* i and e constants updated according to ISO 80000-2:2009 !137 (majjejjam)
* Help overlay updates !133 (Sabri Ünal)
* Added preferences shortcut !129 (Sabri Ünal)
* Destroy dialog after clicking cancel #310 (Jaycee Santos)
Overview of changes in gnome-calculator 43.0.1
* Fixed appdata versioning (Robert Roth)
Overview of changes in gnome-calculator 43.0
* Removed old issue tracker references !128 (Jake Dane)
Overview of changes in gnome-calculator 43.rc
* Fix crash when entering new function name !124 (Nathaniel Russel)
* Fix source view border !121 (Alexander Mikhaylenko)
* Flatpak build update !122 (Bartłomiej Piotrowski)
* Port about window to libadwaita !119 (Christopher Davis)
* Port to libsoup3 !120 (AppleME)
Overview of changes in gnome-calculator 43.alpha
* Fixed broken undo/redo #266 (Robert Roth)
* Make sure variable name definitions work with whitespace too (Robert Roth)
* Fix translatable strings !116 (Maximiliano)
* Fixed missing implicit multiplication with variable and root #279 (Robert Roth)
* meson warning fixes (Robert Roth)
Overview of changes in gnome-calculator 42.2
* Fixed incorrect history with bits toggling #281 (Robert Roth)
* Fixed crash when typing in variable popover #282 (Robert Roth)
* Fixed incorrect libxml usage #283 (Luca Bacci, Robert Roth)
Overview of changes in gnome-calculator 42.1
* Fixed broken undo/redo #266 (Robert Roth)
* Removed automatic closing brace addition #271 (Robert Roth)
* Fixed incorrect percentage symbol precedence handling #236, #275 (Robert Roth)
Overview of changes in gnome-calculator 42.rc
* Use new gnome post_install script !106 (Bobby Rong)
* gcalc build fixes (Daniel Espinoza Ortiz)
* Updated screenshots (Christopher Davis)
* Set default focus to entry (Robert Roth)
Overview of changes in gnome-calculator 42.beta
* Fixed build issues with GCI entry controller tests #250 (Robert Roth)
* Force LTR in history view #252 (Robert Roth)
* programing mode: Force bit digits to be always LTR #258 (Yosef Or Boczko)
* Use AdwApplication (Alexander Mikhaylenko)
* ui: Fix styles !105 (Alexander Mikhaylenko)
Overview of changes in gnome-calculator 42.alpha
* build: Support flatpak development builds (Óscar Fernández Díaz)
* build: migrated to GTK4 !98 (Cristopher Davis, Robert Roth)
* entry: Added currencies completion provider (Robert Roth)
* entry: Fixed percentage evaluation error #237 (Robert Roth)
* internal: Moved history view from MathDisplay to MathWindow (Robert Roth)
* window: set default width for basic and keyboard mode #240 (Robert Roth)
* buttons: removed destructive action class from clear button #242 (Robert Roth)
* converter: search support in unit selector, separate conversion category selector #108 (Robert Roth)
Overview of changes in gnome-calculator 41.0
* Use first translated symbol for conversion with button #219 (Robert Roth)
* Appdata includes hardware support information (Adrien Plazas)
Overview of changes in gnome-calculator 41.alpha
* Adaptive preferences window !85 (Adrien Plazas)
* Fixed currency conversion using convert button #216 (Robert Roth)
* User interface reworked, adaptive UI !81 (Adrien Plazas)
* Enlarged calculator icon in help !82 (Sabri Ünal)
* Code cleanup (Robert Roth)
* Fixed kilohertz shorthand !87 (scootergrisen)
* Fixed donation link !88 (René Genz)
* Added support using calculator without currency conversion for privacy !89 (Ray Strode)
* Added support for function description of custom functions using @ !90 (Martin Jirku)
Overview of changes in gnome-calculator 40.rc
* Resize window after switching mode !78 (joshas)
* Fixed compilation warnings (Robert Roth)
* Support offline currency conversion tests #208 (Robert Roth)
* Use official unit on conversion button click #207 (Robert Roth)
* Fixed temperature unit typos #211 (Robert Roth)
* Ellipsize conversion labels #17 (Robert Roth)
* Added Ctrl+Delete shortcut for clearing the current equation #187 (Robert Roth)
* Allow multiple decimal points #166. #5 (Robert Roth)
* Added Ctrl+O shortcut for degrees symbol (Robert Roth)
* Use gtk-sourceview 4.8 !80 (Robert Roth)
Overview of changes in gnome-calculator 40.beta
* Fixed CI build (Robert Roth)
* Fixed issues with initial loading of currencies (Robert Roth)
* Rework currency retrieval preparing for currency provider plugins (Robert Roth)
* Fixed commandline conversions #33 (Robert Roth)
* Added currency conversion tests (Robert Roth)
* Added support for frequencies conversion (Dave Hulst)
* Added support for converting to and from weeks (Dave Hulst)
* Added support for converting to and from centuries and decades (Dave Hulst)
* Increase buttons font size #201 (Robert Roth)
* Added % button to Advanced mode (Dave Hulst)
* Show 4 decimals in converter instead of only two #203 (Robert Roth)
* Added style classes to buttons !76 (Dave Hulst)
Overview of changes in gnome-calculator 40.alpha
* Use libhandy for window and headerbar !69 (Cristopher Davis)
* Use C instead of Clr in help !70 (scootergrisen)
* Fixed broken currency conversion on first start #199 (Robert Roth)
* Removed duplicate word from help #198 (Robert Roth)
* Added lbs shortcut for pounds conversion (Robert Roth)
* Fixed inconsistent word size (A. M. Roswell)
* Removed unused trunc button from programming mode #41 (Robert Roth)
* Fixed deprecation warnings
* Added Serbian Dinar with fixed rate #49 (Robert Roth)
* Added Bangladeshi Taka with fixed rate #191 (A. M. Roswell)
* Updated mailing list contact to Discourse (Robert Roth)
* Added basic help page for programming mode (A. M. Roswell)
* Added insert character code button (A. M. Roswell)
* Dim inapplicable bits on word size change #189 (A. M. Roswell)
* Make the conversion labels selectable (Robert Roth)
* Do not convert on swap #170 (Robert Roth)
* Word size changer in programming mode !58 (A. M. Roswell)
* Added metric cups conversion unit !53 (Lucy Coleclough)
* Fixed astronomical unit conversion !51 (Thomas Nilsson)
* Fixed feet-based units name, added mph and kph shortcuts #180 (Robert Roth)
* Use shell copy to clipboard action #178 (Robert Roth)
* Fixed preferences of angle units !56 (Delton Ding)
Overview of changes in gnome-calculator 3.38.0
Overview of changes in gnome-calculator 3.37.92
Overview of changes in gnome-calculator 3.37.90
* Add tooltips for bits in programming mode !46 (Olliver Schinagl)
* snap packaging updates (Ken VanDine)
* Added link to website in About #155 (Robert Roth)
* Added speed conversions !49 (Mathieu Heurtevin)
* History view follows preferences #105, #159, #168 (Robert Roth)
* Added month as time unit #158 (Robert Roth)
* Better help for variables example usage #154 (Robert Roth)
* Defined pi variable, added pi button in programming mode #153 (Robert Roth)
* CI build fixes (Robert Roth)
* Updated app icon !47 (Jakub Steiner)
* Fixed bug returning empty string as result #152 (Robert Roth)
* Support latex-style multiplication #164 (Robert Roth)
* Added support for tau constant #46 (Robert Roth)
* Unify constant handling (Robert Roth)
* Separate UI files from sources (Robert Roth)
* Moved number format selection to separate menu #24 (Robert Roth)
* Replaces mode selector shortcuts with Ctrl+Alt (Robert Roth)
* Clear answer if editing right before it #59, #161 (Robert Roth)
* Moved preferences dialog to UI file (Robert Roth)
* Refresh bits panel after calculation #38 (Robert Roth)
* Removed past author addresses #174 (Robert Roth)
Overview of changes in gnome-calculator 3.36.0
Overview of changes in gnome-calculator 3.35.92
* doc: Don't pass --fatal-warnings to valadoc (Rico Tzschichholz)
* Removed obsolete keyboard shortcut #148 (Robert Roth)
* help: Update icon for 3.36 (Andre Klapper)
Overview of changes in gnome-calculator 3.35.90
* Drop padding around the display !40 (Adrien Plazas)
* Updated Keyboard Shortcuts (Sabri Ünal)
* Handle Escape and Enter correctly with completion #144 (Robert Roth)
* Added F10 for primary menu shortcut #148 (Robert Roth)
* Updated app icon !43 (Tobias Bernard)
* Added Rack Units to the conversions !37 (Léo Gillot-Lamure)
* Fixed freeze on calculating atan(+/-i) #139 (Robert Roth)
* Fixed mode shortcuts by removing blocking mnemonics #138 (Robert Roth)
* Implemented result history browsing using alt left/right #129 (Robert Roth)
* Added translator comments for possible modes as command line arguments !38 (Rafael Fontenelle)
Overview of changes in gnome-calculator 3.35.3
* Help updates (Andre Klapper)
Overview of changes in gnome-calculator 3.35.2
* List possible modes in commandline help #112 (Robert Roth)
* Add square feet unit #132 (Robert Roth)
* Base conversion display selectable #123 (Robert Roth)
* Created nightly icon (Jakub Steiner)
* Snap build updates (Heather Ellsworth)
* GCalc library code fixes (Rico Tzschichholz, Daniel Espinoza Ortiz)
* Update required meson version (Diego Escalante Urrelo)
* Adapt code to changed gtk+-3.0 bindings (Rico Tzschichholz)
* Added GCi libary and tests for controllers for widgets (Daniel Espinoza Ortiz)
* Solve on = key if input isq not a variable name #22 (Alberto González Palomo)
Overview of changes in gnome-calculator 3.33.92
* README updates (Roger)
Overview of changes in gnome-calculator 3.33.90
* Flatpak build cleanup (Jordan Petridis)
* Debug messages cleanup (Daniel Espinosa Ortiz)
Overview of changes in gnome-calculator 3.33.3
* calculator library build fixes (Daniel Espinosa Ortiz)
* CI build fixes (Ken VanDine)
* Added mnemonics for primary menu items #113 (Robert Roth)
* Dropped leading zeros octal prefix #114, #109, #110 (Robert Roth)
Overview of changes in gnome-calculator 3.33.2
* Separated calculator library !19 (Daniel Espinosa Ortiz)
* Ensure icon is available for shell (Ken VanDine)
* Support entering left/right shift with keyboard #98 (Robert Roth)
* Fixed CFA conversion rate #102 (Robert Roth)
* Remove copy icon from search provider results #103 (Robert Roth)
* Do not assume octal base for binary numbers #101 (Robert Roth)
* Show thousands separator in unit converter #102 (Robert Roth)
* Use currency name instead of display name for conversion #106 (Robert Roth)
* Quit warns and closes all windows #51 (Robert Roth)
* Avoid normalizing the equation twice in search #104 (Pascal Nowack)
* Ignore keypresses while calculating results #47 (Robert Roth)
* Only allow one decimal point in numbers #5 (Robert Roth)
* Application icon updated in help (Andre Klapper)
jperkin
pushed a commit
that referenced
this issue
Dec 18, 2023
11.0.0 - 2022-05-18 Changed * Updated cucumber-gherkin and cucumber-messages 11.1.0 (2022-12-22) Changed * Update gherkin and messages dependencies Fixed * Restore support for matching a scenario by tag and step line numbers. (#237, #238, #239) 12.0.0 (2023-09-06) Changed * Update gherkin and messages minimum dependencies * Added in new rubocop sub-gems for testing, pinning versions where appropriate * Removed all redundant / incorrect rubocop config overrides (Placed in TODO file) * Began to refactor the repo by initially fixing up a bunch of rubocop auto-fix offenses (See PRs for details) (#257 #258) Removed * Remove support for ruby 2.4 and below. 2.5 or higher is required now 13.0.0 (2023-12-05) Changed * Now using a 2-tiered changelog to avoid any bugs when using polyglot-release * More refactoring of the repo by fixing up a bunch of manual rubocop offenses (See PR's for details) (#259 #262 #268 #274) * In all Summary and Result classes, changed the strict argument into a keyword argument See upgrading notes for 13.0.0.md (#261) * Permit usage of gherkin v27 Fixed * Restore support for matching a scenario by its Feature, Background, and Rule line numbers (#247) Removed * Remove legacy unindent gem (Now no longer required since Ruby 2.3 and Squiggly heredocs) (#278)
jperkin
pushed a commit
that referenced
this issue
Mar 20, 2024
Changelog:
2.13.c.5
Highlights
New features
New custom key commands (#256)
Support basic control chars (\n, \r, \b, \t) in text options (#238)
Added support for the XF86AudioMicMute media key (#273)
Added tab completion for Bash and Zsh (#230)
Perf improvements
Lazy-load slideshow images (#242)
Disable debug build by default; faster blurring (#251)
Changes by PR
fix --max and --fill not scaling image when the image has the same aspect ratio as the screen by @Rio6 in #228
Add link to new active port by @loralighte in #233
chore: rename variables for examples, remove unused variables by @graves501 in #229
fix(typo): fix wrong greeter_y_expr and typo error message in arguments parser. by @cmsxbc in #237
Tab completion (#204) by @JezerM in #230
Slideshow images loaded when needed (#241) by @JezerM in #242
feat(control char): add basic control char support by @cmsxbc in #238
build: disable debug and sanitizers by default by @alanswanson in #251
Shell command options for media keys by @jclds139 in #256
Support for XF86AudioMicMute by @kwesthaus in #273
Fix: Remove breaking space in zsh completion by @kwesthaus in #274
jperkin
pushed a commit
that referenced
this issue
May 17, 2024
Changes in CUPS v2.4.8 (2024-04-26) ----------------------------------- - Added warning if the device has to be asked for 'all,media-col-database' separately (Issue #829) - Added new value for 'lpstat' option '-W' - successfull - for getting successfully printed jobs (Issue #830) - Added support for PAM modules password-auth and system-auth (Issue #892) - Updated IPP Everywhere printer creation error reporting (Issue #347) - Updated and documented the MIME typing buffering limit (Issue #925) - Raised `cups_enum_dests()` timeout for listing available IPP printers (Issue #751) - Now report an error for temporary printer defaults with lpadmin (Issue #237) - Fixed mapping of PPD InputSlot, MediaType, and OutputBin values (Issue #238) - Fixed "document-unprintable-error" handling (Issue #391) - Fixed the web interface not showing an error for a non-existent printer (Issue #423) - Fixed printing of jobs with job name longer than 255 chars on older printers (Issue #644) - Really backported fix for Issue #742 - Fixed `cupsCopyDestInfo` device connection detection (Issue #586) - Fixed "Upgrade" header handling when there is no TLS support (Issue #775) - Fixed memory leak when unloading a job (Issue #813) - Fixed memory leak when creating color profiles (Issue #815) - Fixed a punch finishing bug in the IPP Everywhere support (Issue #821) - Fixed crash in `scan_ps()` if incoming argument is NULL (Issue #831) - Fixed setting job state reasons for successful jobs (Issue #832) - Fixed infinite loop in IPP backend if hostname is IP address with Kerberos (Issue #838) - Added additional check on socket if `revents` from `poll()` returns POLLHUP together with POLLIN or POLLOUT in `httpAddrConnect2()` (Issue #839) - Fixed crash in `ppdEmitString()` if `size` is NULL (Issue #850) - Fixed reporting `media-source-supported` when sharing printer which has numbers as strings instead of keywords as `InputSlot` values (Issue #859) - Fixed IPP backend to support the "print-scaling" option with IPP printers (Issue #862) - Fixed potential race condition for the creation of temporary queues (Issue #871) - Fixed `httpGets` timeout handling (Issue #879) - Fixed checking for required attributes during PPD generation (Issue #890) - Fixed encoding of IPv6 addresses in HTTP requests (Issue #903) - Fixed sending response headers to client (Issue #927) - Fixed CGI program initialization and validation of form checkbox and text fields. Changes in CUPS v2.4.7 (2023-09-20) ----------------------------------- - CVE-2023-4504 - Fixed Heap-based buffer overflow when reading Postscript in PPD files - Added OpenSSL support for cupsHashData (Issue #762) - Fixed delays in lpd backend (Issue #741) - Fixed extensive logging in scheduler (Issue #604) - Fixed hanging of `lpstat` on IBM AIX (Issue #773) - Fixed hanging of `lpstat` on Solaris (Issue #156) - Fixed printing to stderr if we can't open cups-files.conf (Issue #777) - Fixed purging job files via `cancel -x` (Issue #742) - Fixed RFC 1179 port reserving behavior in LPD backend (Issue #743) - Fixed a bug in the PPD command interpretation code (Issue #768) - Fixed Oki 407 freeze when printing larger jobs (Issue #877)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Following the Choose Your Illumos Package Set & Upgrades instructions on OpenIndiana Hipster can be problematic for new users, as attempting to use
gpgreturns-bash: gpg: command not found.Please update or add documentation to use
gpg2instead, as that works.The text was updated successfully, but these errors were encountered: