Releases: ShikOfTheRa/scarab-osd
R2.0.0.1
We are pleased to announce the R2.0 release of MWOSD
Note: This release requires a minimum GUI version of 2.0.0.0
Note: This release will default settings for versions prior to 2.0.0.0 - back up in existing version GUI before upgrading.
The latest GUI is available here for download here:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
2.0.0.1 Summary of changes :
- OSD - Additional Ardupilot flight modes
- OSD - ADSB AGL/ASL reference choice for coexisting with different FC operation
- OSD - Support to display airspeed in knots
- OSD - Improve speed accuracy with mavlink
- FIX - Bugfix for loss of OSD elements from rare UBLOX GPS error message handling
2.0.0.0 Summary of changes :
- OSD - Antenna tracking support - Sentinel AAT support
- OSD - Display element for battery % remaining
- OSD - Display element for embedded VTX
- OSD - Display element for average cell voltage
- OSD - Display element for PID
- OSD - ESC Telemetry OSD target
- OSD - Support for full screen layout in PAL
- OSD - PAL/NTSC autocam option without PAL position manipulation
- OSD - Improved serial performance - especially mavlink
- OSD - Improved VSYNC performance
- OSD - VSYNC - automatically use if supporting hardware detected
- OSD - Support for APM take off mode. TKOF (fixed wing)
- OSD - co-ordinates in DDMMSS (config.h option)
- OSD - Support for Mavlink alternative altitude source (config.h option)
- OSD - Support for KISS GPS RTH (1.3RC44) - xavier
- OSD - Support for KISS Turtle mode (1.3RC44) - xavier
- OSD - Support for KISS Messaging (1.3RC44) - xavier
- OSD - Support for KISS screen swithc from channel 8-10 - xavier
- OSD - Support for KISS FC RSSI (CRSF/GHOST) - xavier
- OSD - Support for Ardupilot ADSB - real aircraft proximity awareness
- OSD - Support for Ardupilot Buddyflight
- OSD - Kiss VTX Power / Channel display
- OSD - Dual timer support
- OSD - Support for average battery cell display
- OSD - Support for Steele PDB
- OSD - Low memory warning added
- OSD - Setting 0 disables all alarm flashing - except voltage
- OSD - filter disabled by default - faster sensor updates are more popular
- OSD - support for canvasOSD - OSD runs purely from OSD
- OSD - LTM2ADSB protocol converter for buddyflight
- OSD - UBLOX2ADSB protocol converter for buddyflight
- OSD - Support for KISS GPS
- OSD - Support for KISS PID menu support
- OSD - Support for KISS Filter menu
- OSD - Support for KISS VTX menu
- OSD - Support for ARDUSUB
- OSD - Support for MAVLINK dual GPS / Baro altitude display
- OSD - Support for MAVLINK high resolution altitude
- OSD - Significantly improved Mavlink messages. Full length and human readable
- OSD - Different indicator icons for GPS, Baro and high resolution altitude values
- OSD - Developer debug memory display functioning for newer compiler versions
- OSD - Support for up to 12s main battery
- OSD - Support for APM VTOL
- OSD - Support for NMEA 9600 baud option pre-compiled
- OSD - Support for SBUS
- OSD - Cleaned up code compiler errors.
- OSD - FlightOne support for 16 channels added
- OSD - FightOne support added. https://flightone.com/
- OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
- OSD - Added a target for display / screen testing
- OSD - Page re-added for iNAV - how to access all FC settings from within OSD
- OSD - Added support for remaining flight time
- GUI - support for all OSD changes
- GUI - 1.9 > 2.0 settings import
- GUI - Faster and more reliable GUI-OSD read / write operations
- GUI - copy layouts
- GUI - move within character editor
- GUI - extend calibration range to 2601 for non std mavlink RSSI
- GUI - DJI Naza available to flash from GUI
- GUI - support for additional OSD enhancements
- GUI - added log player for testing of mavlink / gpsosd etc.
- GUI - minor cosmetic bugfixes
- GUI - improvements for more reliable connect. Work around of bug with OS drivers
- FIX - RSSI for CH8 in KISS
- FIX - font upload corruptions
- FIX - reduced serial data corruption
- FIX - Correct Alt display in high resolution mode (default < 10m)
- FIX - flickering on top line when using VSYNC
- FIX - Bugfix for iNav airspeed display
- FIX - Bugfix for altitude display. GPS can be displayed independently of Baro altitude
- FIX - Bugfix for when selected reversed ahi pitch
- FIX - Bugfix for mavlink auto configure always being enabled
- FIX - bugfix - added resolution for Betaflight sending non valid date
- FIX - bugfix - added default support for mavlink FC that do not send throttle value when armed
- FIX - bugfix for users running iNAV and no GPS - disable low sats text display
- FIX - bugfix for "lat" displayed instead on "lon"
- FIX - bugfix for altitude. Always reported in meters
- FIX - bugfix for max altitude recorded. In some circumstances will not report correctly
- FIX - LTM O frame support removed for FC that do not use it.
- FIX - LTM home set improved
Sentinel Antenna tracker:
https://www.virtualpilot.co.uk/index.php?route=product/product&path=63&product_id=59
Summary of changes in earlier releases:
https://github.com/ShikOfTheRa/scarab-osd/wiki/Features
R2.0.0.0
!!BETA TEST RELEASE!!
We are pleased to announce the R2.0 release of MWOSD
Note: This release requires a minimum GUI version of 2.0.0.0
Note: This release will default settings for versions prior to 2.0.0.0 - back up in existing version GUI before upgrading.
The latest GUI is available here for download here:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
2.0.0.0 Summary of changes :
- OSD - Antenna tracking support - Sentinel AAT support
- OSD - Display element for battery % remaining
- OSD - Display element for embedded VTX
- OSD - Display element for average cell voltage
- OSD - Display element for PID
- OSD - ESC Telemetry OSD target
- OSD - Support for full screen layout in PAL
- OSD - PAL/NTSC autocam option without PAL position manipulation
- OSD - Improved serial performance - especially mavlink
- OSD - Improved VSYNC performance
- OSD - VSYNC - automatically use if supporting hardware detected
- OSD - Support for APM take off mode. TKOF (fixed wing)
- OSD - co-ordinates in DDMMSS (config.h option)
- OSD - Support for Mavlink alternative altitude source (config.h option)
- GUI - support for all OSD changes
- GUI - 1.9 > 2.0 settings import
- GUI - Faster and more reliable GUI-OSD read / write operations
- GUI - copy layouts
- GUI - move within character editor
- GUI - extend calibration range to 2601 for non std mavlink RSSI
- FIX - RSSI for CH8 in KISS
- FIX - font upload corruptions
- FIX - reduced serial data corruption
- FIX - Correct Alt display in high resolution mode (default < 10m)
- FIX - flickering on top line when using VSYNC
interim changes :
- OSD - Support for KISS GPS RTH (1.3RC44) - xavier
- OSD - Support for KISS Turtle mode (1.3RC44) - xavier
- OSD - Support for KISS Messaging (1.3RC44) - xavier
- OSD - Support for KISS screen swithc from channel 8-10 - xavier
- OSD - Support for KISS FC RSSI (CRSF/GHOST) - xavier
- OSD - Support for Ardupilot ADSB - real aircraft proximity awareness
- OSD - Support for Ardupilot Buddyflight
- OSD - Kiss VTX Power / Channel display
- OSD - Dual timer support
- OSD - Support for average battery cell display
- OSD - Support for Steele PDB
- OSD - Low memory warning added
- OSD - Setting 0 disables all alarm flashing - except voltage
- OSD - filter disabled by default - faster sensor updates are more popular
- OSD - support for canvasOSD - OSD runs purely from OSD
- OSD - LTM2ADSB protocol converter for buddyflight
- OSD - UBLOX2ADSB protocol converter for buddyflight
- OSD - Support for KISS GPS
- OSD - Support for KISS PID menu support
- OSD - Support for KISS Filter menu
- OSD - Support for KISS VTX menu
- OSD - Support for ARDUSUB
- OSD - Support for MAVLINK dual GPS / Baro altitude display
- OSD - Support for MAVLINK high resolution altitude
- OSD - Significantly improved Mavlink messages. Full length and human readable
- OSD - Different indicator icons for GPS, Baro and high resolution altitude values
- OSD - Developer debug memory display functioning for newer compiler versions
- OSD - Support for up to 12s main battery
- OSD - Support for APM VTOL
- OSD - Support for NMEA 9600 baud option pre-compiled
- OSD - Support for SBUS
- OSD - Cleaned up code compiler errors.
- OSD - FlightOne support for 16 channels added
- OSD - FightOne support added. https://flightone.com/
- OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
- OSD - Added a target for display / screen testing
- OSD - Page re-added for iNAV - how to access all FC settings from within OSD
- OSD - Added support for remaining flight time
- GUI - DJI Naza available to flash from GUI
- GUI - support for additional OSD enhancements
- GUI - added log player for testing of mavlink / gpsosd etc.
- GUI - minor cosmetic bugfixes
- GUI - improvements for more reliable connect. Work around of bug with OS drivers
- FIX - Bugfix for iNav airspeed display
- FIX - Bugfix for altitude display. GPS can be displayed independently of Baro altitude
- FIX - Bugfix for when selected reversed ahi pitch
- FIX - Bugfix for mavlink auto configure always being enabled
- FIX - bugfix - added resolution for Betaflight sending non valid date
- FIX - bugfix - added default support for mavlink FC that do not send throttle value when armed
- FIX - bugfix for users running iNAV and no GPS - disable low sats text display
- FIX - bugfix for "lat" displayed instead on "lon"
- FIX - bugfix for altitude. Always reported in meters
- FIX - bugfix for max altitude recorded. In some circumstances will not report correctly
- FIX - LTM O frame support removed for FC that do not use it.
- FIX - LTM home set improved
Sentinel Antenna tracker:
https://www.virtualpilot.co.uk/index.php?route=product/product&path=63&product_id=59
Summary of changes in earlier releases:
https://github.com/ShikOfTheRa/scarab-osd/wiki/Features
R1.9.2.0
Note: This release requires a minimum GUI version of 1.9.1.0
Note: This release will default settings for versions prior to 1.9.1.0 - back up first if required.
Latest GUI is available here for download:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
1.9.2.0 Summary of changes :
OSD - Support for KISS GPS RTH (1.3RC44) - xavier
OSD - Support for KISS Turtle mode (1.3RC44) - xavier
OSD - Support for KISS Messaging (1.3RC44) - xavier
OSD - Support for KISS screen swithc from channel 8-10 - xavier
OSD - Support for Ardupilot ADSB - real aircraft proximity awareness
OSD - Support for Ardupilot Buddyflight
OSD - Kiss VTX Power / Channel display
OSD - Dual timer support
OSD - Support for average battery cell display
OSD - Support for Steele PDB
OSD - Low memory warning added
OSD - Setting 0 disables all alarm flashing - except voltage
OSD - filter disabled by default - faster sensor updates are more popular
OSD - support for canvasOSD - OSD runs purely from OSD
OSD - LTM2ADSB protocol converter for buddyflight
OSD - UBLOX2ADSB protocol converter for buddyflight
BUG - LTM O frame support removed for FC that do not use it.
BUG - LTM home set improved
GUI - DJI Naza available to flash from GUI
1.9.1.5 Summary of changes :
OSD - Support for KISS GPS
OSD - Support for KISS PID menu support
OSD - Support for KISS Filter menu
OSD - Support for KISS VTX menu
OSD - Support for ARDUSUB
OSD - Support for MAVLINK dual GPS / Baro altitude display
OSD - Support for MAVLINK high resolution altitude
OSD - Significantly improved Mavlink messages. Full length and human readable
OSD - Different indicator icons for GPS, Baro and high resolution altitude values
OSD - Bugfix for iNav airspeed display
OSD - Bugfix for altitude display. GPS can be displayed independently of Baro altitude
OSD - Developer debug memory display functioning for newer compiler versions
1.9.1.4 Summary of changes :
OSD - Support for up to 12s main battery
OSD - Support for APM VTOL
OSD - Support for NMEA 9600 baud option pre-compiled
OSD - Support for SBUS
OSD - Bugfix for when selected reversed ahi pitch
OSD - Bugfix for mavlink auto configure always being enabled
OSD - Cleaned up code compiler errors.
1.9.1.3 Summary of changes :
OSD - bugfix - added resolution for Betaflight sending non valid date
OSD - FlightOne support for 16 channels added
1.9.1.1 Summary of changes :
OSD - bugfix - added default support for mavlink FC that do not send throttle value when armed
1.9.1.0 Summary of changes :
OSD - FightOne support added. https://flightone.com/
OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
OSD - Added a target for display / screen testing
OSD - Page re-added for iNAV - how to access all FC settings from within OSD
OSD - Added support for remaining flight time
OSD - bugfix for users running iNAV and no GPS - disable low sats text display
OSD - bugfix for "lat" displayed instead on "lon"
OSD - bugfix for altitude. Always reported in meters
OSD - bugfix for max altitude recorded. In some circumstances will not report correctly
GUI - support for additional OSD enhancements
GUI - added log player for testing of mavlink / gpsosd etc.
GUI - minor cosmetic bugfixes
GUI - improvements for more reliable connect. Work around of bug with OS drivers
R1.9.1.6 Test release
Note: This release requires a minimum GUI version of 1.9.1.0
Note: This release will default settings for versions prior to 1.9.1.0 - back up first if required.
Latest GUI is available here for download:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
1.9.1.6 Summary of changes :
OSD - Support for Ardupilot ADSB - real aircraft proximity awareness
OSD - Support for Ardupilot Buddyflight
OSD - Kiss VTX Power / Channel display
OSD - Dual timer support
OSD - Support for average battery cell display
OSD - Support for Steele PDB
OSD - Low memory warning added
GUI - DJI Naza available to flash from GUI
1.9.1.5 Summary of changes :
OSD - Support for KISS GPS
OSD - Support for KISS PID menu support
OSD - Support for KISS Filter menu
OSD - Support for KISS VTX menu
OSD - Support for ARDUSUB
OSD - Support for MAVLINK dual GPS / Baro altitude display
OSD - Support for MAVLINK high resolution altitude
OSD - Significantly improved Mavlink messages. Full length and human readable
OSD - Different indicator icons for GPS, Baro and high resolution altitude values
OSD - Bugfix for iNav airspeed display
OSD - Bugfix for altitude display. GPS can be displayed independently of Baro altitude
OSD - Developer debug memory display functioning for newer compiler versions
1.9.1.4 Summary of changes :
OSD - Support for up to 12s main battery
OSD - Support for APM VTOL
OSD - Support for NMEA 9600 baud option pre-compiled
OSD - Support for SBUS
OSD - Bugfix for when selected reversed ahi pitch
OSD - Bugfix for mavlink auto configure always being enabled
OSD - Cleaned up code compiler errors.
1.9.1.3 Summary of changes :
OSD - bugfix - added resolution for Betaflight sending non valid date
OSD - FlightOne support for 16 channels added
1.9.1.1 Summary of changes :
OSD - bugfix - added default support for mavlink FC that do not send throttle value when armed
1.9.1.0 Summary of changes :
OSD - FightOne support added. https://flightone.com/
OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
OSD - Added a target for display / screen testing
OSD - Page re-added for iNAV - how to access all FC settings from within OSD
OSD - Added support for remaining flight time
OSD - bugfix for users running iNAV and no GPS - disable low sats text display
OSD - bugfix for "lat" displayed instead on "lon"
OSD - bugfix for altitude. Always reported in meters
OSD - bugfix for max altitude recorded. In some circumstances will not report correctly
GUI - support for additional OSD enhancements
GUI - added log player for testing of mavlink / gpsosd etc.
GUI - minor cosmetic bugfixes
GUI - improvements for more reliable connect. Work around of bug with OS drivers
R1.9.1.5
Note: This release requires a minimum GUI version of 1.9.1.0
Note: This release will default settings for versions prior to 1.9.1.0 - back up first if required.
Latest GUI is available here for download:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
1.9.1.5 Summary of changes :
OSD - Support for KISS GPS
OSD - Support for KISS PID menu support
OSD - Support for KISS Filter menu
OSD - Support for KISS VTX menu
OSD - Support for ARDUSUB
OSD - Support for MAVLINK dual GPS / Baro altitude display
OSD - Support for MAVLINK high resolution altitude
OSD - Significantly improved Mavlink messages. Full length and human readable
OSD - Different indicator icons for GPS, Baro and high resolution altitude values
OSD - Bugfix for iNav airspeed display
OSD - Bugfix for altitude display. GPS can be displayed independently of Baro altitude
OSD - Developer debug memory display functioning for newer compiler versions
1.9.1.4 Summary of changes :
OSD - Support for up to 12s main battery
OSD - Support for APM VTOL
OSD - Support for NMEA 9600 baud option pre-compiled
OSD - Support for SBUS
OSD - Bugfix for when selected reversed ahi pitch
OSD - Bugfix for mavlink auto configure always being enabled
OSD - Cleaned up code compiler errors.
1.9.1.3 Summary of changes :
OSD - bugfix - added resolution for Betaflight sending non valid date
OSD - FlightOne support for 16 channels added
1.9.1.1 Summary of changes :
OSD - bugfix - added default support for mavlink FC that do not send throttle value when armed
1.9.1.0 Summary of changes :
OSD - FightOne support added. https://flightone.com/
OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
OSD - Added a target for display / screen testing
OSD - Page re-added for iNAV - how to access all FC settings from within OSD
OSD - Added support for remaining flight time
OSD - bugfix for users running iNAV and no GPS - disable low sats text display
OSD - bugfix for "lat" displayed instead on "lon"
OSD - bugfix for altitude. Always reported in meters
OSD - bugfix for max altitude recorded. In some circumstances will not report correctly
GUI - support for additional OSD enhancements
GUI - added log player for testing of mavlink / gpsosd etc.
GUI - minor cosmetic bugfixes
GUI - improvements for more reliable connect. Work around of bug with OS drivers
R1.9.1.4
Note: This release requires a minimum GUI version of 1.9.1.0
Note: This release will default settings for versions prior to 1.9.1.0 - back up first if required.
Latest GUI is available here for download:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
1.9.1.4 Summary of changes :
OSD - Support for up to 12s main battery
OSD - Support for APM VTOL
OSD - Support for NMEA 9600 baud option pre-compiled
OSD - Support for SBUS
OSD - Bugfix for when selected reversed ahi pitch
OSD - Bugfix for mavlink auto configure always being enabled
OSD - Cleaned up code compiler errors.
1.9.1.3 Summary of changes :
OSD - bugfix - added resolution for Betaflight sending non valid date
OSD - FlightOne support for 16 channels added
1.9.1.1 Summary of changes :
OSD - bugfix - added default support for mavlink FC that do not send throttle value when armed
1.9.1.0 Summary of changes :
OSD - FightOne support added. https://flightone.com/
OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
OSD - Added a target for display / screen testing
OSD - Page re-added for iNAV - how to access all FC settings from within OSD
OSD - Added support for remaining flight time
OSD - bugfix for users running iNAV and no GPS - disable low sats text display
OSD - bugfix for "lat" displayed instead on "lon"
OSD - bugfix for altitude. Always reported in meters
OSD - bugfix for max altitude recorded. In some circumstances will not report correctly
GUI - support for additional OSD enhancements
GUI - added log player for testing of mavlink / gpsosd etc.
GUI - minor cosmetic bugfixes
GUI - improvements for more reliable connect. Work around of bug with OS drivers
R1.9.1.3
Note: This release requires a minimum GUI version of 1.9.1.0
Note: This release will default settings for versions prior to 1.9.1.0 - back up first if required.
Latest GUI is available here for download:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
1.9.1.3 Summary of changes :
OSD - bugfix - added resolution for Betaflight sending non valid date
OSD - FlightOne support for 16 channels added
1.9.1.1 Summary of changes :
OSD - bugfix - added default support for mavlink FC that do not send throttle value when armed
1.9.1.0 Summary of changes :
OSD - FightOne support added. https://flightone.com/
OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
OSD - Added a target for display / screen testing
OSD - Page re-added for iNAV - how to access all FC settings from within OSD
OSD - Added support for remaining flight time
OSD - bugfix for users running iNAV and no GPS - disable low sats text display
OSD - bugfix for "lat" displayed instead on "lon"
OSD - bugfix for altitude. Always reported in meters
OSD - bugfix for max altitude recorded. In some circumstances will not report correctly
GUI - support for additional OSD enhancements
GUI - added log player for testing of mavlink / gpsosd etc.
GUI - minor cosmetic bugfixes
GUI - improvements for more reliable connect. Work around of bug with OS drivers
R1.9.1.1
Note: This release requires a minimum GUI version of 1.9.1.0
Note: This release will default settings for versions prior to 1.9.1.0 - back up first if required.
Latest GUI is available here for download:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI
1.9.1.1 Summary of changes :
OSD - bugfix - added default support for mavlink FC that do not send throttle value when armed
1.9.1.0 Summary of changes :
OSD - FightOne support added. https://flightone.com/
OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
OSD - Added a target for display / screen testing
OSD - Page re-added for iNAV - how to access all FC settings from within OSD
OSD - Added support for remaining flight time
OSD - bugfix for users running iNAV and no GPS - disable low sats text display
OSD - bugfix for "lat" displayed instead on "lon"
OSD - bugfix for altitude. Always reported in meters
OSD - bugfix for max altitude recorded. In some circumstances will not report correctly
GUI - support for additional OSD enhancements
GUI - added log player for testing of mavlink / gpsosd etc.
GUI - minor cosmetic bugfixes
GUI - improvements for more reliable connect. Work around of bug with OS drivers
R1.9
MWOSD Release 1.9
IMPORTANT NOTE: New fonts will need to be installed from GUI app
IMPORTANT NOTE: 1.9 PC client GUI is required. Available here
NOTE: Previous 1.7 chrome GUI users will need to transition to PC client.
Summary of changes in test releases since last main / patch release:
R1.9:
- OSD - GUI supported display flight modes as icons or text. Excludes Ardupilot/ PX4 at present (text only)
- OSD - GPSTIME support – GUI supported display at arming for flight records. Alternatively display always or never.
- OSD - GPSTIME support – Ardupilot/PX4/iNAV/Betaflight
- OSD - Ardupilot/PX4 – GUI supported different tx channel ordering and reversing for menu access
- OSD - Ardupilot/PX4 – very intermittent home altitude bugfix
- OSD - Ardupilot/PX4 – mavlink throttle value used instead of RC channel by default
- OSD - Ardupilot/PX4 – configurable FC alarms level display. Display only alarms levels required
- OSD - MSPV2 – support for updated iNAv protocol
- OSD - iNAV – support for displaying airspeed from FC
- OSD - Support for GUI configurable higher resolution altitude display e.g. up to 100 meters display x.x m
- OSD - Support for Dual RSSI display – RSSI + LQ. For custom builds only
- OSD - Speed can be displayed in meters per second. For custom builds only
- OSD - Default MSP Serial Speed increased – 50% increase in screen element refresh
- OSD - Pilot Icon – GUI supported support for a customised pilot image icon to be displayed instead of callsign
- OSD - Alternative Efficiency display option via config.h - mah used per km/mile travelled.
- GUI - LM35 temperature calibration can now be completed from the GUI
- GUI - Screen character brightness can be set from the GUI
- GUI - GPSTIME support – home timezone can be set. Default is UTC. Note Summer time is not compensated for
- GUI - Ardupilot/PX4 – Mavlink component id can be amended for custom builds
- GUI - Ardupilot – Support for autoconfiguring of Mavlink if possible with significantly improved refresh speeds.
- GUI - Many improvements to make screen preview approximation closer to actual.
- BUG - Glideangle bugfix resolved
- BUG - Crosshair support for GPS/Non GPS standalone OSD
- FONT - Font files updated to support features
- FONT - Bold font file significantly updated to a more modern, digital and fresher look.
R1.8.1
Summary of changes in test releases since last main release:
- NEW - GPSTIME - iNAv. GUI support for timezone/dst savings will be in future. Some features can be tweaked / enabled in config.h
- NEW - PX4/Ardupilot support for swapping tx channels
NOTE: New fonts will need to be installed from GUI app if running version prior to 1.8
NOTE: 1.8 PC client GUI is required