Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Adjustable delta_diagonal_rod_trim #18423

Merged
merged 6 commits into from
Jun 28, 2020
Merged

Adjustable delta_diagonal_rod_trim #18423

merged 6 commits into from
Jun 28, 2020

Conversation

Fabi0San
Copy link
Contributor

Description

This chage adds DELTA_DIAGONAL_ROD_TRIM_TOWER parameters to M665 (and configs M500, M503 etc)

Benefits

Delta diagonal rods are never the same size though we pretend they are.
There are now awesome new tools that can perform a very precise iterative calibration of the individual diagonal rod length sizes.
But for the iteration cycle to be reasonably short it should not involve #define and rebuild, so I'm adding these geometry parameters already existent in Marlin to the M665 delta config commands.

Related Issues

Fabi0San/DuCalibrator#6

@thinkyhead thinkyhead changed the title Adds DELTA_DIAGONAL_ROD_TRIM_TOWER to M665 Adjustable DELTA_DIAGONAL_ROD_TRIM_TOWER Jun 28, 2020
@thinkyhead thinkyhead changed the title Adjustable DELTA_DIAGONAL_ROD_TRIM_TOWER Adjustable delta_diagonal_rod_trim Jun 28, 2020
@thinkyhead thinkyhead merged commit 29753ba into MarlinFirmware:bugfix-2.0.x Jun 28, 2020
@Fabi0San
Copy link
Contributor Author

Thank you very much Scott!

@Fabi0San Fabi0San mentioned this pull request Jun 28, 2020
Merged
Fabi0San added a commit to Fabi0San/DuCalibrator that referenced this pull request Jun 28, 2020
@Fabi0San
Merge pull request #11 from Fabi0San/devel
56a9eb2 
* Moving away from Bootstrap 2 collapsible controls as they are buggy, Fixes #10
* Leveraging Marlin's [newly introduced](MarlinFirmware/Marlin#18423) ability to configure DIAGONAL_ROD_TRIM via M665. Fixes #6
* Instructs Marling to not raise the probe on every probe point, especially helpful to manually deployed probes. Fixes #3
* Improves instructions, mentions useful Marlin configs.
* Discontinue use of deprecated THREE.js API issuing warning on console.
Speaka added a commit to Speaka/Marlin that referenced this pull request Jul 9, 2020
@Speaka @sjasonsmith
@thinkyhead @MoellerDi @ellensp @RudolphRiedel @o-nix @Fabi0San @p3p @rhapsodyv @pmjdebruijn @GMagician @thisiskeithb @JohnnyTheOne @lucasoshiro @InsanityAutomation @jpflouret @Serhiy-K @GerogeFu @robbycandra @cbteeple @notabucketofspam @jan-gerard @oliver-eifler @ManuelMcLure @GhostlyCrowd @longlh @xC0000005 @shuttercat @espr14 @ccccmagicboy @mrseeker
Bugfix 2.0.x update (#1)
49fa99c 
* TMCStepper 0.7.0 followup (MarlinFirmware#18388)

* Improve U8G+SPI delay override (MarlinFirmware#18386)

Co-authored-by: Scott Lahteine <[email protected]>

* Better STM32 Tone timer int priority (MarlinFirmware#18385)

* Fix 3-point middle point (MarlinFirmware#18383)

* Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380)

* Fix ExtUI automatic font scaling (MarlinFirmware#18377)

* [cron] Bump distribution date (2020-06-23)

* No 'probing failed' with retry (MarlinFirmware#18379)

* Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367)

* Move tests up one level

* Use libraries from the registry

* Graphical LCD note

* Update LPC176x platform version (MarlinFirmware#18392)

* Add maintenance actions

* [cron] Bump distribution date (2020-06-24)

* General cleanup

* Run close-stale once per day

* Board-based ST7920 delays

* TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410)

* Display PID Autotune status (MarlinFirmware#18408)

* [cron] Bump distribution date (2020-06-25)

* Use Preheat 1 as M303 default (MarlinFirmware#18407)

* Fix issues with no hotend / bed / fan (MarlinFirmware#18395)

* Fix material preset type

* NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN)

* Fix material preset editing

* Clean up preheat edit items

* [cron] Bump distribution date (2020-06-26)

* Minor LCD cleanup, improvement

* Fix typo in DWIN, preheat array

* Update Italian language (MarlinFirmware#18414)

* [samd51] Manifest assigned timers priority (MarlinFirmware#18402)

* Update MKS Robin Nano auto-build env (MarlinFirmware#18417)

* SAMD51 cleanup (MarlinFirmware#18419)

* BTT SKR Pro runout pins (MarlinFirmware#18416)

* Update Brazilian Portuguese language (MarlinFirmware#18411)

* Fix Fan Speed menu items (MarlinFirmware#18400)

* Patch some DGUS warnings

* Allow larger ADC debounce

Reference MarlinFirmware#17205

* [cron] Bump distribution date (2020-06-27)

* [cron] Bump distribution date (2020-06-28)

* Update language fonts

* Tool Change Migration fixes and debugging (MarlinFirmware#18448)

* ExtUI additions (MarlinFirmware#18447)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Romanian language (MarlinFirmware#18455)

Co-authored-by: cristyanul <[email protected]>

* Fix "probing failed" false positives (MarlinFirmware#18435)

* Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)

* Russian, Ukranian for wide LCD (MarlinFirmware#18433)

* Tweak pins formatting

* Suppress unused var warning

* ClosedLoop as singleton

* [cron] Bump distribution date (2020-06-29)

* MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466)

* Use "reset reason" defines (MarlinFirmware#18462)

* [cron] Bump distribution date (2020-06-30)

* [cron] Bump distribution date (2020-07-01)

* Fix missing parenthesis (MarlinFirmware#18473)

* Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474)

Include this board with other Cheetah stepper reset.

* Hide menu item with no fan (MarlinFirmware#18470)

* Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481)

* Add TFT_LVGL_UI support (MarlinFirmware#18438)

* Per-Hotend Default PIDs (MarlinFirmware#18483)

* Enforce sensor range for temperature target (MarlinFirmware#18465)

* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range

* [cron] Bump distribution date (2020-07-02)

* Tweak stepper shutdown test

* Extend thermistor 1047 to 500°C

* [cron] Bump distribution date (2020-07-03)

* Keep filament runout pin for Creality Melzi (MarlinFirmware#18504)

* Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485)

* Option to set manual Babystepping distance in mm (MarlinFirmware#18503)

Co-authored-by: Scott Lahteine <[email protected]>

* Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373)

* FYSETC OLED followup (MarlinFirmware#18519)

* Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495)

* Fix axis name in serial output (MarlinFirmware#18522)

* Fix env:mks_robin_nano35 (MarlinFirmware#18516)

* FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502)

* M150 I to set Neopixel by index (MarlinFirmware#18490)

* [cron] Bump distribution date (2020-07-04)

* PID Accelerated Edit (MarlinFirmware#18532)

* [cron] Bump distribution date (2020-07-05)

* Fix "'ubl' not declared" error (MarlinFirmware#18541)

* Fix thermistors exist-for-reading tests (MarlinFirmware#18533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix "Probing mesh point" message

Closes MarlinFirmware#17770

Co-Authored-By: Jan-Gerard van der Toorn <[email protected]>

* Probing points followup (MarlinFirmware#18552)

* Update actions on bugfix branch

* Add CI for pushed commits (MarlinFirmware#18549)

* Fix Neopixel set_color (MarlinFirmware#18544)

* Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554)

* Minor pins cleanup

* Add comment to M412

* Reduce string duplication

* STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539)

Co-authored-by: Scott Lahteine <[email protected]>

* Filament Runout Inverting => State (MarlinFirmware#18537)

Co-authored-by: Scott Lahteine <[email protected]>

* Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE

* [cron] Bump distribution date (2020-07-06)

* Filament state followup

* Get SAMD51 CXX flags from script

* Use Material Preset 1 for PID autotune (MarlinFirmware#18446)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Lerdge S,X,K (MarlinFirmware#18302)

* Fix TMC homing phase coils alignment (MarlinFirmware#18528)

Co-authored-by: Fabio Santos <[email protected]>

* Scale runout distance setting for editable range (MarlinFirmware#18567)

* 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564)

* Reduce 'first loop' temperature residency time (MarlinFirmware#18421)

Co-authored-by: Scott Lahteine <[email protected]>

* Update and fix POWER_MONITOR (MarlinFirmware#18561)

* [cron] Bump distribution date (2020-07-07)

* Temp Residency followup

* Combine command macros

* Whitespace cleanup

* Fix typo in Configuration_adv.h (MarlinFirmware#18570)

* [cron] Bump distribution date (2020-07-08)

* SKR 1.4 alert for unsupported LCD

* Tweak PLR debug

* Fix warning with PIO

* Update Chinese (zh_CN) language (MarlinFirmware#18580)

* Show fixed V in Power Display with no V sensor (MarlinFirmware#18579)

* Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590)

* Add `Cap:RUNOUT`

Co-Authored-By: Julius ter Pelkwijk <[email protected]>

* Fix some comments

* [cron] Bump distribution date (2020-07-09)

* Fix missing controller fan include

* Consolidate probe clearance, add section debug (MarlinFirmware#18576)

* Better section / function log
* Add do_z_clearance motion function

* Remove outdated comment (MarlinFirmware#18597)

* Clean up some MMU comments

* MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488)

- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <[email protected]>

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: MoellerDi <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: RudolphRiedel <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Kirill Vergun <[email protected]>
Co-authored-by: Fabio Santos <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: Victor <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Johnny Eshak <[email protected]>
Co-authored-by: Lucas Seiki Oshiro <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: cristyanul <[email protected]>
Co-authored-by: JP Flouret <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: cbteeple <[email protected]>
Co-authored-by: notabucketofspam <[email protected]>
Co-authored-by: Jan-Gerard van der Toorn <[email protected]>
Co-authored-by: Oliver Jean Eifler <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: GhostlyCrowd <[email protected]>
Co-authored-by: Luc Hoang Long <[email protected]>
Co-authored-by: J.C. Nelson <[email protected]>
Co-authored-by: shuttercat <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: cccc <[email protected]>
Co-authored-by: Julius ter Pelkwijk <[email protected]>
Speaka added a commit to Speaka/Marlin that referenced this pull request Jul 20, 2020
@Speaka @sjasonsmith
@thinkyhead @MoellerDi @ellensp @RudolphRiedel @o-nix @Fabi0San @p3p @rhapsodyv @pmjdebruijn @GMagician @thisiskeithb @JohnnyTheOne @lucasoshiro @InsanityAutomation @jpflouret @Serhiy-K @GerogeFu @robbycandra @cbteeple @notabucketofspam @jan-gerard @oliver-eifler @ManuelMcLure @GhostlyCrowd @longlh @xC0000005 @shuttercat @espr14 @ccccmagicboy @mrseeker
Bugfix 2.0.x update (#1)
9fb50f4 
* TMCStepper 0.7.0 followup (MarlinFirmware#18388)

* Improve U8G+SPI delay override (MarlinFirmware#18386)

Co-authored-by: Scott Lahteine <[email protected]>

* Better STM32 Tone timer int priority (MarlinFirmware#18385)

* Fix 3-point middle point (MarlinFirmware#18383)

* Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380)

* Fix ExtUI automatic font scaling (MarlinFirmware#18377)

* [cron] Bump distribution date (2020-06-23)

* No 'probing failed' with retry (MarlinFirmware#18379)

* Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367)

* Move tests up one level

* Use libraries from the registry

* Graphical LCD note

* Update LPC176x platform version (MarlinFirmware#18392)

* Add maintenance actions

* [cron] Bump distribution date (2020-06-24)

* General cleanup

* Run close-stale once per day

* Board-based ST7920 delays

* TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410)

* Display PID Autotune status (MarlinFirmware#18408)

* [cron] Bump distribution date (2020-06-25)

* Use Preheat 1 as M303 default (MarlinFirmware#18407)

* Fix issues with no hotend / bed / fan (MarlinFirmware#18395)

* Fix material preset type

* NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN)

* Fix material preset editing

* Clean up preheat edit items

* [cron] Bump distribution date (2020-06-26)

* Minor LCD cleanup, improvement

* Fix typo in DWIN, preheat array

* Update Italian language (MarlinFirmware#18414)

* [samd51] Manifest assigned timers priority (MarlinFirmware#18402)

* Update MKS Robin Nano auto-build env (MarlinFirmware#18417)

* SAMD51 cleanup (MarlinFirmware#18419)

* BTT SKR Pro runout pins (MarlinFirmware#18416)

* Update Brazilian Portuguese language (MarlinFirmware#18411)

* Fix Fan Speed menu items (MarlinFirmware#18400)

* Patch some DGUS warnings

* Allow larger ADC debounce

Reference MarlinFirmware#17205

* [cron] Bump distribution date (2020-06-27)

* [cron] Bump distribution date (2020-06-28)

* Update language fonts

* Tool Change Migration fixes and debugging (MarlinFirmware#18448)

* ExtUI additions (MarlinFirmware#18447)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Romanian language (MarlinFirmware#18455)

Co-authored-by: cristyanul <[email protected]>

* Fix "probing failed" false positives (MarlinFirmware#18435)

* Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)

* Russian, Ukranian for wide LCD (MarlinFirmware#18433)

* Tweak pins formatting

* Suppress unused var warning

* ClosedLoop as singleton

* [cron] Bump distribution date (2020-06-29)

* MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466)

* Use "reset reason" defines (MarlinFirmware#18462)

* [cron] Bump distribution date (2020-06-30)

* [cron] Bump distribution date (2020-07-01)

* Fix missing parenthesis (MarlinFirmware#18473)

* Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474)

Include this board with other Cheetah stepper reset.

* Hide menu item with no fan (MarlinFirmware#18470)

* Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481)

* Add TFT_LVGL_UI support (MarlinFirmware#18438)

* Per-Hotend Default PIDs (MarlinFirmware#18483)

* Enforce sensor range for temperature target (MarlinFirmware#18465)

* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range

* [cron] Bump distribution date (2020-07-02)

* Tweak stepper shutdown test

* Extend thermistor 1047 to 500°C

* [cron] Bump distribution date (2020-07-03)

* Keep filament runout pin for Creality Melzi (MarlinFirmware#18504)

* Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485)

* Option to set manual Babystepping distance in mm (MarlinFirmware#18503)

Co-authored-by: Scott Lahteine <[email protected]>

* Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373)

* FYSETC OLED followup (MarlinFirmware#18519)

* Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495)

* Fix axis name in serial output (MarlinFirmware#18522)

* Fix env:mks_robin_nano35 (MarlinFirmware#18516)

* FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502)

* M150 I to set Neopixel by index (MarlinFirmware#18490)

* [cron] Bump distribution date (2020-07-04)

* PID Accelerated Edit (MarlinFirmware#18532)

* [cron] Bump distribution date (2020-07-05)

* Fix "'ubl' not declared" error (MarlinFirmware#18541)

* Fix thermistors exist-for-reading tests (MarlinFirmware#18533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix "Probing mesh point" message

Closes MarlinFirmware#17770

Co-Authored-By: Jan-Gerard van der Toorn <[email protected]>

* Probing points followup (MarlinFirmware#18552)

* Update actions on bugfix branch

* Add CI for pushed commits (MarlinFirmware#18549)

* Fix Neopixel set_color (MarlinFirmware#18544)

* Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554)

* Minor pins cleanup

* Add comment to M412

* Reduce string duplication

* STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539)

Co-authored-by: Scott Lahteine <[email protected]>

* Filament Runout Inverting => State (MarlinFirmware#18537)

Co-authored-by: Scott Lahteine <[email protected]>

* Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE

* [cron] Bump distribution date (2020-07-06)

* Filament state followup

* Get SAMD51 CXX flags from script

* Use Material Preset 1 for PID autotune (MarlinFirmware#18446)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Lerdge S,X,K (MarlinFirmware#18302)

* Fix TMC homing phase coils alignment (MarlinFirmware#18528)

Co-authored-by: Fabio Santos <[email protected]>

* Scale runout distance setting for editable range (MarlinFirmware#18567)

* 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564)

* Reduce 'first loop' temperature residency time (MarlinFirmware#18421)

Co-authored-by: Scott Lahteine <[email protected]>

* Update and fix POWER_MONITOR (MarlinFirmware#18561)

* [cron] Bump distribution date (2020-07-07)

* Temp Residency followup

* Combine command macros

* Whitespace cleanup

* Fix typo in Configuration_adv.h (MarlinFirmware#18570)

* [cron] Bump distribution date (2020-07-08)

* SKR 1.4 alert for unsupported LCD

* Tweak PLR debug

* Fix warning with PIO

* Update Chinese (zh_CN) language (MarlinFirmware#18580)

* Show fixed V in Power Display with no V sensor (MarlinFirmware#18579)

* Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590)

* Add `Cap:RUNOUT`

Co-Authored-By: Julius ter Pelkwijk <[email protected]>

* Fix some comments

* [cron] Bump distribution date (2020-07-09)

* Fix missing controller fan include

* Consolidate probe clearance, add section debug (MarlinFirmware#18576)

* Better section / function log
* Add do_z_clearance motion function

* Remove outdated comment (MarlinFirmware#18597)

* Clean up some MMU comments

* MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488)

- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <[email protected]>

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: MoellerDi <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: RudolphRiedel <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Kirill Vergun <[email protected]>
Co-authored-by: Fabio Santos <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: Victor <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Johnny Eshak <[email protected]>
Co-authored-by: Lucas Seiki Oshiro <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: cristyanul <[email protected]>
Co-authored-by: JP Flouret <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: cbteeple <[email protected]>
Co-authored-by: notabucketofspam <[email protected]>
Co-authored-by: Jan-Gerard van der Toorn <[email protected]>
Co-authored-by: Oliver Jean Eifler <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: GhostlyCrowd <[email protected]>
Co-authored-by: Luc Hoang Long <[email protected]>
Co-authored-by: J.C. Nelson <[email protected]>
Co-authored-by: shuttercat <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: cccc <[email protected]>
Co-authored-by: Julius ter Pelkwijk <[email protected]>
Speaka added a commit to Speaka/Marlin that referenced this pull request Jul 20, 2020
@Speaka @sjasonsmith
@thinkyhead @MoellerDi @ellensp @RudolphRiedel @o-nix @Fabi0San @p3p @rhapsodyv @pmjdebruijn @GMagician @thisiskeithb @JohnnyTheOne @lucasoshiro @InsanityAutomation @jpflouret @Serhiy-K @GerogeFu @robbycandra @cbteeple @notabucketofspam @jan-gerard @oliver-eifler @ManuelMcLure @GhostlyCrowd @longlh @xC0000005 @shuttercat @espr14 @ccccmagicboy @mrseeker
Bugfix 2.0.x update (#1)
45c0a04 
* TMCStepper 0.7.0 followup (MarlinFirmware#18388)

* Improve U8G+SPI delay override (MarlinFirmware#18386)

Co-authored-by: Scott Lahteine <[email protected]>

* Better STM32 Tone timer int priority (MarlinFirmware#18385)

* Fix 3-point middle point (MarlinFirmware#18383)

* Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380)

* Fix ExtUI automatic font scaling (MarlinFirmware#18377)

* [cron] Bump distribution date (2020-06-23)

* No 'probing failed' with retry (MarlinFirmware#18379)

* Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367)

* Move tests up one level

* Use libraries from the registry

* Graphical LCD note

* Update LPC176x platform version (MarlinFirmware#18392)

* Add maintenance actions

* [cron] Bump distribution date (2020-06-24)

* General cleanup

* Run close-stale once per day

* Board-based ST7920 delays

* TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410)

* Display PID Autotune status (MarlinFirmware#18408)

* [cron] Bump distribution date (2020-06-25)

* Use Preheat 1 as M303 default (MarlinFirmware#18407)

* Fix issues with no hotend / bed / fan (MarlinFirmware#18395)

* Fix material preset type

* NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN)

* Fix material preset editing

* Clean up preheat edit items

* [cron] Bump distribution date (2020-06-26)

* Minor LCD cleanup, improvement

* Fix typo in DWIN, preheat array

* Update Italian language (MarlinFirmware#18414)

* [samd51] Manifest assigned timers priority (MarlinFirmware#18402)

* Update MKS Robin Nano auto-build env (MarlinFirmware#18417)

* SAMD51 cleanup (MarlinFirmware#18419)

* BTT SKR Pro runout pins (MarlinFirmware#18416)

* Update Brazilian Portuguese language (MarlinFirmware#18411)

* Fix Fan Speed menu items (MarlinFirmware#18400)

* Patch some DGUS warnings

* Allow larger ADC debounce

Reference MarlinFirmware#17205

* [cron] Bump distribution date (2020-06-27)

* [cron] Bump distribution date (2020-06-28)

* Update language fonts

* Tool Change Migration fixes and debugging (MarlinFirmware#18448)

* ExtUI additions (MarlinFirmware#18447)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Romanian language (MarlinFirmware#18455)

Co-authored-by: cristyanul <[email protected]>

* Fix "probing failed" false positives (MarlinFirmware#18435)

* Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)

* Russian, Ukranian for wide LCD (MarlinFirmware#18433)

* Tweak pins formatting

* Suppress unused var warning

* ClosedLoop as singleton

* [cron] Bump distribution date (2020-06-29)

* MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466)

* Use "reset reason" defines (MarlinFirmware#18462)

* [cron] Bump distribution date (2020-06-30)

* [cron] Bump distribution date (2020-07-01)

* Fix missing parenthesis (MarlinFirmware#18473)

* Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474)

Include this board with other Cheetah stepper reset.

* Hide menu item with no fan (MarlinFirmware#18470)

* Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481)

* Add TFT_LVGL_UI support (MarlinFirmware#18438)

* Per-Hotend Default PIDs (MarlinFirmware#18483)

* Enforce sensor range for temperature target (MarlinFirmware#18465)

* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range

* [cron] Bump distribution date (2020-07-02)

* Tweak stepper shutdown test

* Extend thermistor 1047 to 500°C

* [cron] Bump distribution date (2020-07-03)

* Keep filament runout pin for Creality Melzi (MarlinFirmware#18504)

* Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485)

* Option to set manual Babystepping distance in mm (MarlinFirmware#18503)

Co-authored-by: Scott Lahteine <[email protected]>

* Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373)

* FYSETC OLED followup (MarlinFirmware#18519)

* Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495)

* Fix axis name in serial output (MarlinFirmware#18522)

* Fix env:mks_robin_nano35 (MarlinFirmware#18516)

* FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502)

* M150 I to set Neopixel by index (MarlinFirmware#18490)

* [cron] Bump distribution date (2020-07-04)

* PID Accelerated Edit (MarlinFirmware#18532)

* [cron] Bump distribution date (2020-07-05)

* Fix "'ubl' not declared" error (MarlinFirmware#18541)

* Fix thermistors exist-for-reading tests (MarlinFirmware#18533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix "Probing mesh point" message

Closes MarlinFirmware#17770

Co-Authored-By: Jan-Gerard van der Toorn <[email protected]>

* Probing points followup (MarlinFirmware#18552)

* Update actions on bugfix branch

* Add CI for pushed commits (MarlinFirmware#18549)

* Fix Neopixel set_color (MarlinFirmware#18544)

* Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554)

* Minor pins cleanup

* Add comment to M412

* Reduce string duplication

* STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539)

Co-authored-by: Scott Lahteine <[email protected]>

* Filament Runout Inverting => State (MarlinFirmware#18537)

Co-authored-by: Scott Lahteine <[email protected]>

* Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE

* [cron] Bump distribution date (2020-07-06)

* Filament state followup

* Get SAMD51 CXX flags from script

* Use Material Preset 1 for PID autotune (MarlinFirmware#18446)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Lerdge S,X,K (MarlinFirmware#18302)

* Fix TMC homing phase coils alignment (MarlinFirmware#18528)

Co-authored-by: Fabio Santos <[email protected]>

* Scale runout distance setting for editable range (MarlinFirmware#18567)

* 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564)

* Reduce 'first loop' temperature residency time (MarlinFirmware#18421)

Co-authored-by: Scott Lahteine <[email protected]>

* Update and fix POWER_MONITOR (MarlinFirmware#18561)

* [cron] Bump distribution date (2020-07-07)

* Temp Residency followup

* Combine command macros

* Whitespace cleanup

* Fix typo in Configuration_adv.h (MarlinFirmware#18570)

* [cron] Bump distribution date (2020-07-08)

* SKR 1.4 alert for unsupported LCD

* Tweak PLR debug

* Fix warning with PIO

* Update Chinese (zh_CN) language (MarlinFirmware#18580)

* Show fixed V in Power Display with no V sensor (MarlinFirmware#18579)

* Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590)

* Add `Cap:RUNOUT`

Co-Authored-By: Julius ter Pelkwijk <[email protected]>

* Fix some comments

* [cron] Bump distribution date (2020-07-09)

* Fix missing controller fan include

* Consolidate probe clearance, add section debug (MarlinFirmware#18576)

* Better section / function log
* Add do_z_clearance motion function

* Remove outdated comment (MarlinFirmware#18597)

* Clean up some MMU comments

* MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488)

- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <[email protected]>

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: MoellerDi <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: RudolphRiedel <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Kirill Vergun <[email protected]>
Co-authored-by: Fabio Santos <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: Victor <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Johnny Eshak <[email protected]>
Co-authored-by: Lucas Seiki Oshiro <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: cristyanul <[email protected]>
Co-authored-by: JP Flouret <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: cbteeple <[email protected]>
Co-authored-by: notabucketofspam <[email protected]>
Co-authored-by: Jan-Gerard van der Toorn <[email protected]>
Co-authored-by: Oliver Jean Eifler <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: GhostlyCrowd <[email protected]>
Co-authored-by: Luc Hoang Long <[email protected]>
Co-authored-by: J.C. Nelson <[email protected]>
Co-authored-by: shuttercat <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: cccc <[email protected]>
Co-authored-by: Julius ter Pelkwijk <[email protected]>
Speaka added a commit to Speaka/Marlin that referenced this pull request Jul 21, 2020
@Speaka @sjasonsmith
@thinkyhead @MoellerDi @ellensp @RudolphRiedel @o-nix @Fabi0San @p3p @rhapsodyv @pmjdebruijn @GMagician @thisiskeithb @JohnnyTheOne @lucasoshiro @InsanityAutomation @jpflouret @Serhiy-K @GerogeFu @robbycandra @cbteeple @notabucketofspam @jan-gerard @oliver-eifler @ManuelMcLure @GhostlyCrowd @longlh @xC0000005 @shuttercat @espr14 @ccccmagicboy @mrseeker
Bugfix 2.0.x update (#1)
10cce0c 
* TMCStepper 0.7.0 followup (MarlinFirmware#18388)

* Improve U8G+SPI delay override (MarlinFirmware#18386)

Co-authored-by: Scott Lahteine <[email protected]>

* Better STM32 Tone timer int priority (MarlinFirmware#18385)

* Fix 3-point middle point (MarlinFirmware#18383)

* Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380)

* Fix ExtUI automatic font scaling (MarlinFirmware#18377)

* [cron] Bump distribution date (2020-06-23)

* No 'probing failed' with retry (MarlinFirmware#18379)

* Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367)

* Move tests up one level

* Use libraries from the registry

* Graphical LCD note

* Update LPC176x platform version (MarlinFirmware#18392)

* Add maintenance actions

* [cron] Bump distribution date (2020-06-24)

* General cleanup

* Run close-stale once per day

* Board-based ST7920 delays

* TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410)

* Display PID Autotune status (MarlinFirmware#18408)

* [cron] Bump distribution date (2020-06-25)

* Use Preheat 1 as M303 default (MarlinFirmware#18407)

* Fix issues with no hotend / bed / fan (MarlinFirmware#18395)

* Fix material preset type

* NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN)

* Fix material preset editing

* Clean up preheat edit items

* [cron] Bump distribution date (2020-06-26)

* Minor LCD cleanup, improvement

* Fix typo in DWIN, preheat array

* Update Italian language (MarlinFirmware#18414)

* [samd51] Manifest assigned timers priority (MarlinFirmware#18402)

* Update MKS Robin Nano auto-build env (MarlinFirmware#18417)

* SAMD51 cleanup (MarlinFirmware#18419)

* BTT SKR Pro runout pins (MarlinFirmware#18416)

* Update Brazilian Portuguese language (MarlinFirmware#18411)

* Fix Fan Speed menu items (MarlinFirmware#18400)

* Patch some DGUS warnings

* Allow larger ADC debounce

Reference MarlinFirmware#17205

* [cron] Bump distribution date (2020-06-27)

* [cron] Bump distribution date (2020-06-28)

* Update language fonts

* Tool Change Migration fixes and debugging (MarlinFirmware#18448)

* ExtUI additions (MarlinFirmware#18447)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Romanian language (MarlinFirmware#18455)

Co-authored-by: cristyanul <[email protected]>

* Fix "probing failed" false positives (MarlinFirmware#18435)

* Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)

* Russian, Ukranian for wide LCD (MarlinFirmware#18433)

* Tweak pins formatting

* Suppress unused var warning

* ClosedLoop as singleton

* [cron] Bump distribution date (2020-06-29)

* MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466)

* Use "reset reason" defines (MarlinFirmware#18462)

* [cron] Bump distribution date (2020-06-30)

* [cron] Bump distribution date (2020-07-01)

* Fix missing parenthesis (MarlinFirmware#18473)

* Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474)

Include this board with other Cheetah stepper reset.

* Hide menu item with no fan (MarlinFirmware#18470)

* Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481)

* Add TFT_LVGL_UI support (MarlinFirmware#18438)

* Per-Hotend Default PIDs (MarlinFirmware#18483)

* Enforce sensor range for temperature target (MarlinFirmware#18465)

* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range

* [cron] Bump distribution date (2020-07-02)

* Tweak stepper shutdown test

* Extend thermistor 1047 to 500°C

* [cron] Bump distribution date (2020-07-03)

* Keep filament runout pin for Creality Melzi (MarlinFirmware#18504)

* Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485)

* Option to set manual Babystepping distance in mm (MarlinFirmware#18503)

Co-authored-by: Scott Lahteine <[email protected]>

* Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373)

* FYSETC OLED followup (MarlinFirmware#18519)

* Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495)

* Fix axis name in serial output (MarlinFirmware#18522)

* Fix env:mks_robin_nano35 (MarlinFirmware#18516)

* FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502)

* M150 I to set Neopixel by index (MarlinFirmware#18490)

* [cron] Bump distribution date (2020-07-04)

* PID Accelerated Edit (MarlinFirmware#18532)

* [cron] Bump distribution date (2020-07-05)

* Fix "'ubl' not declared" error (MarlinFirmware#18541)

* Fix thermistors exist-for-reading tests (MarlinFirmware#18533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix "Probing mesh point" message

Closes MarlinFirmware#17770

Co-Authored-By: Jan-Gerard van der Toorn <[email protected]>

* Probing points followup (MarlinFirmware#18552)

* Update actions on bugfix branch

* Add CI for pushed commits (MarlinFirmware#18549)

* Fix Neopixel set_color (MarlinFirmware#18544)

* Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554)

* Minor pins cleanup

* Add comment to M412

* Reduce string duplication

* STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539)

Co-authored-by: Scott Lahteine <[email protected]>

* Filament Runout Inverting => State (MarlinFirmware#18537)

Co-authored-by: Scott Lahteine <[email protected]>

* Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE

* [cron] Bump distribution date (2020-07-06)

* Filament state followup

* Get SAMD51 CXX flags from script

* Use Material Preset 1 for PID autotune (MarlinFirmware#18446)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Lerdge S,X,K (MarlinFirmware#18302)

* Fix TMC homing phase coils alignment (MarlinFirmware#18528)

Co-authored-by: Fabio Santos <[email protected]>

* Scale runout distance setting for editable range (MarlinFirmware#18567)

* 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564)

* Reduce 'first loop' temperature residency time (MarlinFirmware#18421)

Co-authored-by: Scott Lahteine <[email protected]>

* Update and fix POWER_MONITOR (MarlinFirmware#18561)

* [cron] Bump distribution date (2020-07-07)

* Temp Residency followup

* Combine command macros

* Whitespace cleanup

* Fix typo in Configuration_adv.h (MarlinFirmware#18570)

* [cron] Bump distribution date (2020-07-08)

* SKR 1.4 alert for unsupported LCD

* Tweak PLR debug

* Fix warning with PIO

* Update Chinese (zh_CN) language (MarlinFirmware#18580)

* Show fixed V in Power Display with no V sensor (MarlinFirmware#18579)

* Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590)

* Add `Cap:RUNOUT`

Co-Authored-By: Julius ter Pelkwijk <[email protected]>

* Fix some comments

* [cron] Bump distribution date (2020-07-09)

* Fix missing controller fan include

* Consolidate probe clearance, add section debug (MarlinFirmware#18576)

* Better section / function log
* Add do_z_clearance motion function

* Remove outdated comment (MarlinFirmware#18597)

* Clean up some MMU comments

* MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488)

- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <[email protected]>

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: MoellerDi <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: RudolphRiedel <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Kirill Vergun <[email protected]>
Co-authored-by: Fabio Santos <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: Victor <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Johnny Eshak <[email protected]>
Co-authored-by: Lucas Seiki Oshiro <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: cristyanul <[email protected]>
Co-authored-by: JP Flouret <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: cbteeple <[email protected]>
Co-authored-by: notabucketofspam <[email protected]>
Co-authored-by: Jan-Gerard van der Toorn <[email protected]>
Co-authored-by: Oliver Jean Eifler <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: GhostlyCrowd <[email protected]>
Co-authored-by: Luc Hoang Long <[email protected]>
Co-authored-by: J.C. Nelson <[email protected]>
Co-authored-by: shuttercat <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: cccc <[email protected]>
Co-authored-by: Julius ter Pelkwijk <[email protected]>
jmp0x0000 pushed a commit to jmp0x0000/Marlin that referenced this pull request Aug 7, 2020
@Fabi0San
Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)
7bd3877
Speaka added a commit to Speaka/Marlin that referenced this pull request Aug 13, 2020
@Speaka @sjasonsmith
@thinkyhead @MoellerDi @ellensp @RudolphRiedel @o-nix @Fabi0San @p3p @rhapsodyv @pmjdebruijn @GMagician @thisiskeithb @JohnnyTheOne @lucasoshiro @InsanityAutomation @jpflouret @Serhiy-K @GerogeFu @robbycandra @cbteeple @notabucketofspam @jan-gerard @oliver-eifler @ManuelMcLure @GhostlyCrowd @longlh @xC0000005 @shuttercat @espr14 @ccccmagicboy @mrseeker
Bugfix 2.0.x update (#1)
abea31a 
* TMCStepper 0.7.0 followup (MarlinFirmware#18388)

* Improve U8G+SPI delay override (MarlinFirmware#18386)

Co-authored-by: Scott Lahteine <[email protected]>

* Better STM32 Tone timer int priority (MarlinFirmware#18385)

* Fix 3-point middle point (MarlinFirmware#18383)

* Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380)

* Fix ExtUI automatic font scaling (MarlinFirmware#18377)

* [cron] Bump distribution date (2020-06-23)

* No 'probing failed' with retry (MarlinFirmware#18379)

* Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367)

* Move tests up one level

* Use libraries from the registry

* Graphical LCD note

* Update LPC176x platform version (MarlinFirmware#18392)

* Add maintenance actions

* [cron] Bump distribution date (2020-06-24)

* General cleanup

* Run close-stale once per day

* Board-based ST7920 delays

* TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410)

* Display PID Autotune status (MarlinFirmware#18408)

* [cron] Bump distribution date (2020-06-25)

* Use Preheat 1 as M303 default (MarlinFirmware#18407)

* Fix issues with no hotend / bed / fan (MarlinFirmware#18395)

* Fix material preset type

* NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN)

* Fix material preset editing

* Clean up preheat edit items

* [cron] Bump distribution date (2020-06-26)

* Minor LCD cleanup, improvement

* Fix typo in DWIN, preheat array

* Update Italian language (MarlinFirmware#18414)

* [samd51] Manifest assigned timers priority (MarlinFirmware#18402)

* Update MKS Robin Nano auto-build env (MarlinFirmware#18417)

* SAMD51 cleanup (MarlinFirmware#18419)

* BTT SKR Pro runout pins (MarlinFirmware#18416)

* Update Brazilian Portuguese language (MarlinFirmware#18411)

* Fix Fan Speed menu items (MarlinFirmware#18400)

* Patch some DGUS warnings

* Allow larger ADC debounce

Reference MarlinFirmware#17205

* [cron] Bump distribution date (2020-06-27)

* [cron] Bump distribution date (2020-06-28)

* Update language fonts

* Tool Change Migration fixes and debugging (MarlinFirmware#18448)

* ExtUI additions (MarlinFirmware#18447)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Romanian language (MarlinFirmware#18455)

Co-authored-by: cristyanul <[email protected]>

* Fix "probing failed" false positives (MarlinFirmware#18435)

* Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)

* Russian, Ukranian for wide LCD (MarlinFirmware#18433)

* Tweak pins formatting

* Suppress unused var warning

* ClosedLoop as singleton

* [cron] Bump distribution date (2020-06-29)

* MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466)

* Use "reset reason" defines (MarlinFirmware#18462)

* [cron] Bump distribution date (2020-06-30)

* [cron] Bump distribution date (2020-07-01)

* Fix missing parenthesis (MarlinFirmware#18473)

* Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474)

Include this board with other Cheetah stepper reset.

* Hide menu item with no fan (MarlinFirmware#18470)

* Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481)

* Add TFT_LVGL_UI support (MarlinFirmware#18438)

* Per-Hotend Default PIDs (MarlinFirmware#18483)

* Enforce sensor range for temperature target (MarlinFirmware#18465)

* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range

* [cron] Bump distribution date (2020-07-02)

* Tweak stepper shutdown test

* Extend thermistor 1047 to 500°C

* [cron] Bump distribution date (2020-07-03)

* Keep filament runout pin for Creality Melzi (MarlinFirmware#18504)

* Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485)

* Option to set manual Babystepping distance in mm (MarlinFirmware#18503)

Co-authored-by: Scott Lahteine <[email protected]>

* Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373)

* FYSETC OLED followup (MarlinFirmware#18519)

* Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495)

* Fix axis name in serial output (MarlinFirmware#18522)

* Fix env:mks_robin_nano35 (MarlinFirmware#18516)

* FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502)

* M150 I to set Neopixel by index (MarlinFirmware#18490)

* [cron] Bump distribution date (2020-07-04)

* PID Accelerated Edit (MarlinFirmware#18532)

* [cron] Bump distribution date (2020-07-05)

* Fix "'ubl' not declared" error (MarlinFirmware#18541)

* Fix thermistors exist-for-reading tests (MarlinFirmware#18533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix "Probing mesh point" message

Closes MarlinFirmware#17770

Co-Authored-By: Jan-Gerard van der Toorn <[email protected]>

* Probing points followup (MarlinFirmware#18552)

* Update actions on bugfix branch

* Add CI for pushed commits (MarlinFirmware#18549)

* Fix Neopixel set_color (MarlinFirmware#18544)

* Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554)

* Minor pins cleanup

* Add comment to M412

* Reduce string duplication

* STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539)

Co-authored-by: Scott Lahteine <[email protected]>

* Filament Runout Inverting => State (MarlinFirmware#18537)

Co-authored-by: Scott Lahteine <[email protected]>

* Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE

* [cron] Bump distribution date (2020-07-06)

* Filament state followup

* Get SAMD51 CXX flags from script

* Use Material Preset 1 for PID autotune (MarlinFirmware#18446)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Lerdge S,X,K (MarlinFirmware#18302)

* Fix TMC homing phase coils alignment (MarlinFirmware#18528)

Co-authored-by: Fabio Santos <[email protected]>

* Scale runout distance setting for editable range (MarlinFirmware#18567)

* 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564)

* Reduce 'first loop' temperature residency time (MarlinFirmware#18421)

Co-authored-by: Scott Lahteine <[email protected]>

* Update and fix POWER_MONITOR (MarlinFirmware#18561)

* [cron] Bump distribution date (2020-07-07)

* Temp Residency followup

* Combine command macros

* Whitespace cleanup

* Fix typo in Configuration_adv.h (MarlinFirmware#18570)

* [cron] Bump distribution date (2020-07-08)

* SKR 1.4 alert for unsupported LCD

* Tweak PLR debug

* Fix warning with PIO

* Update Chinese (zh_CN) language (MarlinFirmware#18580)

* Show fixed V in Power Display with no V sensor (MarlinFirmware#18579)

* Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590)

* Add `Cap:RUNOUT`

Co-Authored-By: Julius ter Pelkwijk <[email protected]>

* Fix some comments

* [cron] Bump distribution date (2020-07-09)

* Fix missing controller fan include

* Consolidate probe clearance, add section debug (MarlinFirmware#18576)

* Better section / function log
* Add do_z_clearance motion function

* Remove outdated comment (MarlinFirmware#18597)

* Clean up some MMU comments

* MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488)

- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <[email protected]>

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: MoellerDi <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: RudolphRiedel <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Kirill Vergun <[email protected]>
Co-authored-by: Fabio Santos <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: Victor <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Johnny Eshak <[email protected]>
Co-authored-by: Lucas Seiki Oshiro <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: cristyanul <[email protected]>
Co-authored-by: JP Flouret <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: cbteeple <[email protected]>
Co-authored-by: notabucketofspam <[email protected]>
Co-authored-by: Jan-Gerard van der Toorn <[email protected]>
Co-authored-by: Oliver Jean Eifler <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: GhostlyCrowd <[email protected]>
Co-authored-by: Luc Hoang Long <[email protected]>
Co-authored-by: J.C. Nelson <[email protected]>
Co-authored-by: shuttercat <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: cccc <[email protected]>
Co-authored-by: Julius ter Pelkwijk <[email protected]>
Speaka added a commit to Speaka/Marlin that referenced this pull request Aug 13, 2020
@Speaka @sjasonsmith
@thinkyhead @MoellerDi @ellensp @RudolphRiedel @o-nix @Fabi0San @p3p @rhapsodyv @pmjdebruijn @GMagician @thisiskeithb @JohnnyTheOne @lucasoshiro @InsanityAutomation @jpflouret @Serhiy-K @GerogeFu @robbycandra @cbteeple @notabucketofspam @jan-gerard @oliver-eifler @ManuelMcLure @GhostlyCrowd @longlh @xC0000005 @shuttercat @espr14 @ccccmagicboy @mrseeker
Bugfix 2.0.x update (#1)
705b060 
* TMCStepper 0.7.0 followup (MarlinFirmware#18388)

* Improve U8G+SPI delay override (MarlinFirmware#18386)

Co-authored-by: Scott Lahteine <[email protected]>

* Better STM32 Tone timer int priority (MarlinFirmware#18385)

* Fix 3-point middle point (MarlinFirmware#18383)

* Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380)

* Fix ExtUI automatic font scaling (MarlinFirmware#18377)

* [cron] Bump distribution date (2020-06-23)

* No 'probing failed' with retry (MarlinFirmware#18379)

* Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367)

* Move tests up one level

* Use libraries from the registry

* Graphical LCD note

* Update LPC176x platform version (MarlinFirmware#18392)

* Add maintenance actions

* [cron] Bump distribution date (2020-06-24)

* General cleanup

* Run close-stale once per day

* Board-based ST7920 delays

* TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410)

* Display PID Autotune status (MarlinFirmware#18408)

* [cron] Bump distribution date (2020-06-25)

* Use Preheat 1 as M303 default (MarlinFirmware#18407)

* Fix issues with no hotend / bed / fan (MarlinFirmware#18395)

* Fix material preset type

* NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN)

* Fix material preset editing

* Clean up preheat edit items

* [cron] Bump distribution date (2020-06-26)

* Minor LCD cleanup, improvement

* Fix typo in DWIN, preheat array

* Update Italian language (MarlinFirmware#18414)

* [samd51] Manifest assigned timers priority (MarlinFirmware#18402)

* Update MKS Robin Nano auto-build env (MarlinFirmware#18417)

* SAMD51 cleanup (MarlinFirmware#18419)

* BTT SKR Pro runout pins (MarlinFirmware#18416)

* Update Brazilian Portuguese language (MarlinFirmware#18411)

* Fix Fan Speed menu items (MarlinFirmware#18400)

* Patch some DGUS warnings

* Allow larger ADC debounce

Reference MarlinFirmware#17205

* [cron] Bump distribution date (2020-06-27)

* [cron] Bump distribution date (2020-06-28)

* Update language fonts

* Tool Change Migration fixes and debugging (MarlinFirmware#18448)

* ExtUI additions (MarlinFirmware#18447)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Romanian language (MarlinFirmware#18455)

Co-authored-by: cristyanul <[email protected]>

* Fix "probing failed" false positives (MarlinFirmware#18435)

* Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)

* Russian, Ukranian for wide LCD (MarlinFirmware#18433)

* Tweak pins formatting

* Suppress unused var warning

* ClosedLoop as singleton

* [cron] Bump distribution date (2020-06-29)

* MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466)

* Use "reset reason" defines (MarlinFirmware#18462)

* [cron] Bump distribution date (2020-06-30)

* [cron] Bump distribution date (2020-07-01)

* Fix missing parenthesis (MarlinFirmware#18473)

* Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474)

Include this board with other Cheetah stepper reset.

* Hide menu item with no fan (MarlinFirmware#18470)

* Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481)

* Add TFT_LVGL_UI support (MarlinFirmware#18438)

* Per-Hotend Default PIDs (MarlinFirmware#18483)

* Enforce sensor range for temperature target (MarlinFirmware#18465)

* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range

* [cron] Bump distribution date (2020-07-02)

* Tweak stepper shutdown test

* Extend thermistor 1047 to 500°C

* [cron] Bump distribution date (2020-07-03)

* Keep filament runout pin for Creality Melzi (MarlinFirmware#18504)

* Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485)

* Option to set manual Babystepping distance in mm (MarlinFirmware#18503)

Co-authored-by: Scott Lahteine <[email protected]>

* Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373)

* FYSETC OLED followup (MarlinFirmware#18519)

* Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495)

* Fix axis name in serial output (MarlinFirmware#18522)

* Fix env:mks_robin_nano35 (MarlinFirmware#18516)

* FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502)

* M150 I to set Neopixel by index (MarlinFirmware#18490)

* [cron] Bump distribution date (2020-07-04)

* PID Accelerated Edit (MarlinFirmware#18532)

* [cron] Bump distribution date (2020-07-05)

* Fix "'ubl' not declared" error (MarlinFirmware#18541)

* Fix thermistors exist-for-reading tests (MarlinFirmware#18533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix "Probing mesh point" message

Closes MarlinFirmware#17770

Co-Authored-By: Jan-Gerard van der Toorn <[email protected]>

* Probing points followup (MarlinFirmware#18552)

* Update actions on bugfix branch

* Add CI for pushed commits (MarlinFirmware#18549)

* Fix Neopixel set_color (MarlinFirmware#18544)

* Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554)

* Minor pins cleanup

* Add comment to M412

* Reduce string duplication

* STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539)

Co-authored-by: Scott Lahteine <[email protected]>

* Filament Runout Inverting => State (MarlinFirmware#18537)

Co-authored-by: Scott Lahteine <[email protected]>

* Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE

* [cron] Bump distribution date (2020-07-06)

* Filament state followup

* Get SAMD51 CXX flags from script

* Use Material Preset 1 for PID autotune (MarlinFirmware#18446)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Lerdge S,X,K (MarlinFirmware#18302)

* Fix TMC homing phase coils alignment (MarlinFirmware#18528)

Co-authored-by: Fabio Santos <[email protected]>

* Scale runout distance setting for editable range (MarlinFirmware#18567)

* 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564)

* Reduce 'first loop' temperature residency time (MarlinFirmware#18421)

Co-authored-by: Scott Lahteine <[email protected]>

* Update and fix POWER_MONITOR (MarlinFirmware#18561)

* [cron] Bump distribution date (2020-07-07)

* Temp Residency followup

* Combine command macros

* Whitespace cleanup

* Fix typo in Configuration_adv.h (MarlinFirmware#18570)

* [cron] Bump distribution date (2020-07-08)

* SKR 1.4 alert for unsupported LCD

* Tweak PLR debug

* Fix warning with PIO

* Update Chinese (zh_CN) language (MarlinFirmware#18580)

* Show fixed V in Power Display with no V sensor (MarlinFirmware#18579)

* Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590)

* Add `Cap:RUNOUT`

Co-Authored-By: Julius ter Pelkwijk <[email protected]>

* Fix some comments

* [cron] Bump distribution date (2020-07-09)

* Fix missing controller fan include

* Consolidate probe clearance, add section debug (MarlinFirmware#18576)

* Better section / function log
* Add do_z_clearance motion function

* Remove outdated comment (MarlinFirmware#18597)

* Clean up some MMU comments

* MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488)

- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <[email protected]>

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: MoellerDi <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: RudolphRiedel <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Kirill Vergun <[email protected]>
Co-authored-by: Fabio Santos <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: Victor <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Johnny Eshak <[email protected]>
Co-authored-by: Lucas Seiki Oshiro <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: cristyanul <[email protected]>
Co-authored-by: JP Flouret <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: cbteeple <[email protected]>
Co-authored-by: notabucketofspam <[email protected]>
Co-authored-by: Jan-Gerard van der Toorn <[email protected]>
Co-authored-by: Oliver Jean Eifler <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: GhostlyCrowd <[email protected]>
Co-authored-by: Luc Hoang Long <[email protected]>
Co-authored-by: J.C. Nelson <[email protected]>
Co-authored-by: shuttercat <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: cccc <[email protected]>
Co-authored-by: Julius ter Pelkwijk <[email protected]>
Speaka added a commit to Speaka/Marlin that referenced this pull request Aug 13, 2020
@Speaka @sjasonsmith
@thinkyhead @MoellerDi @ellensp @RudolphRiedel @o-nix @Fabi0San @p3p @rhapsodyv @pmjdebruijn @GMagician @thisiskeithb @JohnnyTheOne @lucasoshiro @InsanityAutomation @jpflouret @Serhiy-K @GerogeFu @robbycandra @cbteeple @notabucketofspam @jan-gerard @oliver-eifler @ManuelMcLure @GhostlyCrowd @longlh @xC0000005 @shuttercat @espr14 @ccccmagicboy @mrseeker
Bugfix 2.0.x update (#1)
8f6fa36 
* TMCStepper 0.7.0 followup (MarlinFirmware#18388)

* Improve U8G+SPI delay override (MarlinFirmware#18386)

Co-authored-by: Scott Lahteine <[email protected]>

* Better STM32 Tone timer int priority (MarlinFirmware#18385)

* Fix 3-point middle point (MarlinFirmware#18383)

* Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380)

* Fix ExtUI automatic font scaling (MarlinFirmware#18377)

* [cron] Bump distribution date (2020-06-23)

* No 'probing failed' with retry (MarlinFirmware#18379)

* Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367)

* Move tests up one level

* Use libraries from the registry

* Graphical LCD note

* Update LPC176x platform version (MarlinFirmware#18392)

* Add maintenance actions

* [cron] Bump distribution date (2020-06-24)

* General cleanup

* Run close-stale once per day

* Board-based ST7920 delays

* TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410)

* Display PID Autotune status (MarlinFirmware#18408)

* [cron] Bump distribution date (2020-06-25)

* Use Preheat 1 as M303 default (MarlinFirmware#18407)

* Fix issues with no hotend / bed / fan (MarlinFirmware#18395)

* Fix material preset type

* NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN)

* Fix material preset editing

* Clean up preheat edit items

* [cron] Bump distribution date (2020-06-26)

* Minor LCD cleanup, improvement

* Fix typo in DWIN, preheat array

* Update Italian language (MarlinFirmware#18414)

* [samd51] Manifest assigned timers priority (MarlinFirmware#18402)

* Update MKS Robin Nano auto-build env (MarlinFirmware#18417)

* SAMD51 cleanup (MarlinFirmware#18419)

* BTT SKR Pro runout pins (MarlinFirmware#18416)

* Update Brazilian Portuguese language (MarlinFirmware#18411)

* Fix Fan Speed menu items (MarlinFirmware#18400)

* Patch some DGUS warnings

* Allow larger ADC debounce

Reference MarlinFirmware#17205

* [cron] Bump distribution date (2020-06-27)

* [cron] Bump distribution date (2020-06-28)

* Update language fonts

* Tool Change Migration fixes and debugging (MarlinFirmware#18448)

* ExtUI additions (MarlinFirmware#18447)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Romanian language (MarlinFirmware#18455)

Co-authored-by: cristyanul <[email protected]>

* Fix "probing failed" false positives (MarlinFirmware#18435)

* Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)

* Russian, Ukranian for wide LCD (MarlinFirmware#18433)

* Tweak pins formatting

* Suppress unused var warning

* ClosedLoop as singleton

* [cron] Bump distribution date (2020-06-29)

* MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466)

* Use "reset reason" defines (MarlinFirmware#18462)

* [cron] Bump distribution date (2020-06-30)

* [cron] Bump distribution date (2020-07-01)

* Fix missing parenthesis (MarlinFirmware#18473)

* Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474)

Include this board with other Cheetah stepper reset.

* Hide menu item with no fan (MarlinFirmware#18470)

* Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481)

* Add TFT_LVGL_UI support (MarlinFirmware#18438)

* Per-Hotend Default PIDs (MarlinFirmware#18483)

* Enforce sensor range for temperature target (MarlinFirmware#18465)

* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range

* [cron] Bump distribution date (2020-07-02)

* Tweak stepper shutdown test

* Extend thermistor 1047 to 500°C

* [cron] Bump distribution date (2020-07-03)

* Keep filament runout pin for Creality Melzi (MarlinFirmware#18504)

* Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485)

* Option to set manual Babystepping distance in mm (MarlinFirmware#18503)

Co-authored-by: Scott Lahteine <[email protected]>

* Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373)

* FYSETC OLED followup (MarlinFirmware#18519)

* Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495)

* Fix axis name in serial output (MarlinFirmware#18522)

* Fix env:mks_robin_nano35 (MarlinFirmware#18516)

* FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502)

* M150 I to set Neopixel by index (MarlinFirmware#18490)

* [cron] Bump distribution date (2020-07-04)

* PID Accelerated Edit (MarlinFirmware#18532)

* [cron] Bump distribution date (2020-07-05)

* Fix "'ubl' not declared" error (MarlinFirmware#18541)

* Fix thermistors exist-for-reading tests (MarlinFirmware#18533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix "Probing mesh point" message

Closes MarlinFirmware#17770

Co-Authored-By: Jan-Gerard van der Toorn <[email protected]>

* Probing points followup (MarlinFirmware#18552)

* Update actions on bugfix branch

* Add CI for pushed commits (MarlinFirmware#18549)

* Fix Neopixel set_color (MarlinFirmware#18544)

* Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554)

* Minor pins cleanup

* Add comment to M412

* Reduce string duplication

* STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539)

Co-authored-by: Scott Lahteine <[email protected]>

* Filament Runout Inverting => State (MarlinFirmware#18537)

Co-authored-by: Scott Lahteine <[email protected]>

* Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE

* [cron] Bump distribution date (2020-07-06)

* Filament state followup

* Get SAMD51 CXX flags from script

* Use Material Preset 1 for PID autotune (MarlinFirmware#18446)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Lerdge S,X,K (MarlinFirmware#18302)

* Fix TMC homing phase coils alignment (MarlinFirmware#18528)

Co-authored-by: Fabio Santos <[email protected]>

* Scale runout distance setting for editable range (MarlinFirmware#18567)

* 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564)

* Reduce 'first loop' temperature residency time (MarlinFirmware#18421)

Co-authored-by: Scott Lahteine <[email protected]>

* Update and fix POWER_MONITOR (MarlinFirmware#18561)

* [cron] Bump distribution date (2020-07-07)

* Temp Residency followup

* Combine command macros

* Whitespace cleanup

* Fix typo in Configuration_adv.h (MarlinFirmware#18570)

* [cron] Bump distribution date (2020-07-08)

* SKR 1.4 alert for unsupported LCD

* Tweak PLR debug

* Fix warning with PIO

* Update Chinese (zh_CN) language (MarlinFirmware#18580)

* Show fixed V in Power Display with no V sensor (MarlinFirmware#18579)

* Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590)

* Add `Cap:RUNOUT`

Co-Authored-By: Julius ter Pelkwijk <[email protected]>

* Fix some comments

* [cron] Bump distribution date (2020-07-09)

* Fix missing controller fan include

* Consolidate probe clearance, add section debug (MarlinFirmware#18576)

* Better section / function log
* Add do_z_clearance motion function

* Remove outdated comment (MarlinFirmware#18597)

* Clean up some MMU comments

* MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488)

- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <[email protected]>

Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: MoellerDi <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: RudolphRiedel <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Kirill Vergun <[email protected]>
Co-authored-by: Fabio Santos <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: Victor <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Johnny Eshak <[email protected]>
Co-authored-by: Lucas Seiki Oshiro <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: cristyanul <[email protected]>
Co-authored-by: JP Flouret <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: cbteeple <[email protected]>
Co-authored-by: notabucketofspam <[email protected]>
Co-authored-by: Jan-Gerard van der Toorn <[email protected]>
Co-authored-by: Oliver Jean Eifler <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: GhostlyCrowd <[email protected]>
Co-authored-by: Luc Hoang Long <[email protected]>
Co-authored-by: J.C. Nelson <[email protected]>
Co-authored-by: shuttercat <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: cccc <[email protected]>
Co-authored-by: Julius ter Pelkwijk <[email protected]>
dotdash32 added a commit to dotdash32/Marlin that referenced this pull request Aug 26, 2020
@dotdash32 @thinkyhead
@GMagician @thisiskeithb @JohnnyTheOne @lucasoshiro @sjasonsmith @InsanityAutomation @jpflouret @Fabi0San @Serhiy-K @ellensp @GerogeFu @robbycandra @rhapsodyv @cbteeple @notabucketofspam @jan-gerard @oliver-eifler @ManuelMcLure @GhostlyCrowd @longlh @xC0000005 @shuttercat @espr14 @ccccmagicboy @mrseeker @chepo92 @Speaka @p3p @Lord-Quake @Evg33 @Sergey1560 @hub-jba @mtowara @yufanyufan @TheNitek @pmjdebruijn @marknn3 @ivankravets @Diegovd @fleek @MKS-Sean @giryan @Palatis @MoellerDi @natemason @swissnorp @andrivet @FLYmaker @cbaugher @rmoravcik @jufimu12
Updating personal fork for 2.0.6 release. (#4)
e5efb7a 
* Fix material preset type

* Fix material preset editing

* NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN)

* Clean up preheat edit items

* [cron] Bump distribution date (2020-06-26)

* Minor LCD cleanup, improvement

* Fix typo in DWIN, preheat array

* Update Italian language (MarlinFirmware#18414)

* [samd51] Manifest assigned timers priority (MarlinFirmware#18402)

* Update MKS Robin Nano auto-build env (MarlinFirmware#18417)

* SAMD51 cleanup (MarlinFirmware#18419)

* BTT SKR Pro runout pins (MarlinFirmware#18416)

* Update Brazilian Portuguese language (MarlinFirmware#18411)

* Fix Fan Speed menu items (MarlinFirmware#18400)

* Patch some DGUS warnings

* Allow larger ADC debounce

Reference MarlinFirmware#17205

* [cron] Bump distribution date (2020-06-27)

* [cron] Bump distribution date (2020-06-28)

* Update language fonts

* Tool Change Migration fixes and debugging (MarlinFirmware#18448)

* ExtUI additions (MarlinFirmware#18447)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Romanian language (MarlinFirmware#18455)

Co-authored-by: cristyanul <[email protected]>

* Fix "probing failed" false positives (MarlinFirmware#18435)

* Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)

* Russian, Ukranian for wide LCD (MarlinFirmware#18433)

* Tweak pins formatting

* Suppress unused var warning

* ClosedLoop as singleton

* [cron] Bump distribution date (2020-06-29)

* MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466)

* Use "reset reason" defines (MarlinFirmware#18462)

* [cron] Bump distribution date (2020-06-30)

* [cron] Bump distribution date (2020-07-01)

* Fix missing parenthesis (MarlinFirmware#18473)

* Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474)

Include this board with other Cheetah stepper reset.

* Hide menu item with no fan (MarlinFirmware#18470)

* Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481)

* Add TFT_LVGL_UI support (MarlinFirmware#18438)

* Per-Hotend Default PIDs (MarlinFirmware#18483)

* Enforce sensor range for temperature target (MarlinFirmware#18465)

* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range

* [cron] Bump distribution date (2020-07-02)

* Tweak stepper shutdown test

* Extend thermistor 1047 to 500°C

* Updated lock / unlock actions

* [cron] Bump distribution date (2020-07-03)

* Keep filament runout pin for Creality Melzi (MarlinFirmware#18504)

* Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485)

* Option to set manual Babystepping distance in mm (MarlinFirmware#18503)

Co-authored-by: Scott Lahteine <[email protected]>

* Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373)

* FYSETC OLED followup (MarlinFirmware#18519)

* Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495)

* Fix axis name in serial output (MarlinFirmware#18522)

* Fix env:mks_robin_nano35 (MarlinFirmware#18516)

* FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502)

* M150 I to set Neopixel by index (MarlinFirmware#18490)

* [cron] Bump distribution date (2020-07-04)

* PID Accelerated Edit (MarlinFirmware#18532)

* Patch Bad PR action

* Two lock-closed per day

* [cron] Bump distribution date (2020-07-05)

* Fix "'ubl' not declared" error (MarlinFirmware#18541)

* Fix thermistors exist-for-reading tests (MarlinFirmware#18533)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix "Probing mesh point" message

Closes MarlinFirmware#17770

Co-Authored-By: Jan-Gerard van der Toorn <[email protected]>

* Limit actions to main

* Probing points followup (MarlinFirmware#18552)

* Update actions on bugfix branch

* Add CI for pushed commits

Co-Authored-By: thisiskeithb <[email protected]>

* Add CI for pushed commits (MarlinFirmware#18549)

* Fix Neopixel set_color (MarlinFirmware#18544)

* Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554)

* Minor pins cleanup

* Add comment to M412

* Reduce string duplication

* STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539)

Co-authored-by: Scott Lahteine <[email protected]>

* Filament Runout Inverting => State (MarlinFirmware#18537)

Co-authored-by: Scott Lahteine <[email protected]>

* Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE

* [cron] Bump distribution date (2020-07-06)

* Temporarily use patched lock-threads

* Filament state followup

* Get SAMD51 CXX flags from script

* Use Material Preset 1 for PID autotune (MarlinFirmware#18446)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557)

Co-authored-by: Scott Lahteine <[email protected]>

* Add Lerdge S,X,K (MarlinFirmware#18302)

* Fix TMC homing phase coils alignment (MarlinFirmware#18528)

Co-authored-by: Fabio Santos <[email protected]>

* Scale runout distance setting for editable range (MarlinFirmware#18567)

* 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564)

* Reduce 'first loop' temperature residency time (MarlinFirmware#18421)

Co-authored-by: Scott Lahteine <[email protected]>

* Update and fix POWER_MONITOR (MarlinFirmware#18561)

* [cron] Bump distribution date (2020-07-07)

* Temp Residency followup

* Whitespace cleanup

* Combine command macros

* Fix typo in Configuration_adv.h (MarlinFirmware#18570)

* [cron] Bump distribution date (2020-07-08)

* Tweak PLR debug

* Fix warning with PIO

* SKR 1.4 alert for unsupported LCD

* Update Chinese (zh_CN) language (MarlinFirmware#18580)

* Lock threads updated

* Show fixed V in Power Display with no V sensor (MarlinFirmware#18579)

* Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590)

* Fix some comments

* Add `Cap:RUNOUT`

Co-Authored-By: Julius ter Pelkwijk <[email protected]>

* [cron] Bump distribution date (2020-07-09)

* Fix missing controller fan include

* 2.0.5.4 : Use ststm32 < 6.2

* Consolidate probe clearance, add section debug (MarlinFirmware#18576)

* Better section / function log
* Add do_z_clearance motion function

* Remove outdated comment (MarlinFirmware#18597)

* Clean up some MMU comments

* MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488)

- Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`.
- Extend menu items to permit a string interpolation.
- Keep material names in a list and interpolate in menu items.
- Extend material presets to support up to 5 predefined materials.

Co-authored-by: Scott Lahteine <[email protected]>

* "M122 I" to reinitialize TMC (MarlinFirmware#18571)

* [cron] Bump distribution date (2020-07-10)

* Add current offset for POWER_MONITOR sensor (MarlinFirmware#18600)

* Fix CMSIS / USB-FD regression (MarlinFirmware#18602)

* Fix Chitu V6 with LVGL UI (MarlinFirmware#18608)

* Fix CHITU_F103 pio.board name (MarlinFirmware#18486)

* Capitalize "G-code"

* [cron] Bump distribution date (2020-07-11)

* Option to assist thermocouple debug (MarlinFirmware#18621)

* Fix pid_debug_flag

* Specify supported library versions

* [cron] Bump distribution date (2020-07-12)

* Clarify MICROSTEP_MODES

* Option for extra endstop check (MarlinFirmware#18424)

* Fix G35 output formatting (MarlinFirmware#18631)

* [cron] Bump distribution date (2020-07-13)

* [email protected] for LPC

* Creality V4 cleanup

* [cron] Bump distribution date (2020-07-14)

* Fix / improve menu items (MarlinFirmware#18644)

* LPC fix NeoPixel fork

* Fix leveling "Point n of 3" message (MarlinFirmware#18639)

* Increase STM32F1 Servo Timer Interrupt Priority (MarlinFirmware#18637)

* [cron] Bump distribution date (2020-07-15)

* Specify ststm32 @ 6.1.x

* Tool-change debug option

* Add REPORT_FAN_CHANGE as an option

* Clean up DWIN code

* General cleanup

* Fix some Power Loss Recovery behaviors (MarlinFirmware#18558)

* PLR followup

* Fix Hotend Idle Timeout trigger (MarlinFirmware#18657)

* [cron] Bump distribution date (2020-07-16)

* Fix SKR 1.4 LCD / ADC Keypad sanity-check (MarlinFirmware#18670)

* Broadcast host actions

Fixes MarlinFirmware#18565

* Sanity-check BABYSTEP_MULTIPLICATOR_*

* [cron] Bump distribution date (2020-07-17)

* Fix material_preset reference issue

* Chopper Timing Preset for 24V 0.9° (MarlinFirmware#18662)

* Fix passive Chamber Temp reading (MarlinFirmware#18674)

* Fix check_hotends with > 1 hotend

* Tweak and use SD_ORDER

* ExtUI for Anycubic I3 Mega (MarlinFirmware#18655)

* Support FT81050 with FYSETC F6 (MarlinFirmware#18678)

Co-authored-by: Scott Lahteine <[email protected]>

* Smaller SD EEPROM file on Ender 3 V2

* Use safe_delay for PSU_POWERUP_DELAY (MarlinFirmware#18680)

Co-authored-by: Scott Lahteine <[email protected]>

* Fix E3V2 M0/M1 and wait_for_user

* [cron] Bump distribution date (2020-07-18)

* Chitu V6 - Stepper Z2 pins (MarlinFirmware#18683)

* Fix DGUS write variable endianness (MarlinFirmware#18689)

* Trigorilla Pro board (MarlinFirmware#18692)

* Prettier BLTouch menu items (MarlinFirmware#18682)

* Return to Status on PID Autotune (MarlinFirmware#18695)

* Misc formatting, cleanup

* [cron] Bump distribution date (2020-07-19)

* More customizable DGUSDisplay (MarlinFirmware#18700)

* Fix encoder reverse, partial steps handling (MarlinFirmware#18694)

* Update Chinese (cn) language (MarlinFirmware#18705)

* Fix endian DGUS WriteVariable (MarlinFirmware#18703)

* Fix BLTouch PWM reliability in HAL/STM32 (MarlinFirmware#18702)

* [cron] Bump distribution date (2020-07-20)

* SAMD51: More reliable Servo/BLTouch PWM (MarlinFirmware#18710)

* Only download & compile required libraries (MarlinFirmware#18699)

* Reduce Step Smoothing ceiling to 50% CPU usage (MarlinFirmware#18719)

* Fix some LVGL warnings

* Patch auto-deps for Windows CXX (MarlinFirmware#18721)

* [cron] Bump distribution date (2020-07-21)

* Matching mat.bed_temp condition

* Ignore unused (but downloaded) libraries (MarlinFirmware#18728)

* Use development version of PlatformIO (MarlinFirmware#18724)

* Fix build for Windows path edge case

* Filter some unused Marlin/src subfolders (MarlinFirmware#18729)

* New DGUS UI var / definition syntax (MarlinFirmware#18718)

* Optimize LCD, Wifi, etc. libraries (MarlinFirmware#18730)

* Fix inline AnycubicSerial method

* Anycubic followup

* [cron] Bump distribution date (2020-07-22)

* Fix Spanish preheat strings (MarlinFirmware#18743)

* Explicit SdFat

* Custom Nozzle Wipe (MarlinFirmware#18736)

* [cron] Bump distribution date (2020-07-23)

* Linear Advance: Only change E DIR when needed (MarlinFirmware#18744)

* Fix links to secure sites (MarlinFirmware#18745)

* Fast Filament Change temperature check (MarlinFirmware#18738)

* General cleanup

* [cron] Bump distribution date (2020-07-24)

* Update FYSETC AIO II TMC UART pins (MarlinFirmware#18749)

* Update links, README, contributing, etc.

* Update links, README, contributing, etc.

* ibid.

* Add CONTROLLER_FAN_IGNORE_Z (MarlinFirmware#18735)

* Simplify encoder handling (MarlinFirmware#18754)

* Fix ESP3D_WIFISUPPORT ini typo

* Apply lib_ignore from [features] (MarlinFirmware#18762)

* Ender 3 V2 BL24C16 EEPROM support (MarlinFirmware#18758)

* Filament Runout pin for Creality v4.2.2 board (MarlinFirmware#18763)

* [cron] Bump distribution date (2020-07-25)

* Ender 3 V2: Inject 'G28 O' before G29 (MarlinFirmware#18767)

* Fix Lerdge variant script (MarlinFirmware#18771)

* G425/G35 menu items; G425 pre- and post- scripts (MarlinFirmware#18737)

* Robin nano V2, TFT LVGL UI parameters, and more (MarlinFirmware#18500)

* Clean up after changes

* Update (c)

* Fix ui.external_control compile error (MarlinFirmware#18778)

* [cron] Bump distribution date (2020-07-26)

* Fix search for best compiler (MarlinFirmware#18779)

* Close host's Filament Change dialog (MarlinFirmware#18785)

* More folders only compiled when their feature is Enabled (MarlinFirmware#18780)

Co-authored-by: Scott Lahteine <[email protected]>

* Randomize firmware.bin, fix unflag

* Fix MKS Robin Nano V2 build / upload (MarlinFirmware#18784)

* Fix compile-time PWM_PIN (MarlinFirmware#18793)

Co-authored-by: Scott Lahteine <[email protected]>

* Prevent ESP3D_WIFISUPPORT with non-ESP32 board (MarlinFirmware#18792)

* Add 0 to EXTRUDERS :[json] (MarlinFirmware#18786)

* [cron] Bump distribution date (2020-07-27)

* Config for Anycubic Mega TFT

* Marlin Release 2.0.6

* [cron] Bump distribution date (2020-07-28)

* Fix WiFi / ESP32 sanity check (MarlinFirmware#18808)

* Fix garbled print_xyz output (MarlinFirmware#18810)

* Fix DELTA + TMC sensorless homing + SPI endstops (MarlinFirmware#18811)

* DISABLE_DEBUG required to free Robin nano Z_DIR_PIN (MarlinFirmware#18832)

* Fix NEOPIXEL_LED compile w/out PRINTER_EVENT_LEDS (MarlinFirmware#18824)

* Add TEMP_PROBE_PIN for Einsy Rambo (MarlinFirmware#18823)

* Fix Cancel Objects index display (zero-based) (MarlinFirmware#18841)

* Fix UNKNOWN_Z_NO_RAISE in G28

Bug introduced in 73fc077

* In G28 Z is sort-of known

* Update include_tree

* Add monitor_flags

* Fix Duplicator i3 Plus pin diagram (MarlinFirmware#18862)

* Fix FLYF407ZG pins (MarlinFirmware#18865)

* Fix Spindle/Laser PWM DC (MarlinFirmware#18871)

* No mks_robin extra_scripts in Trigorilla build (MarlinFirmware#18872)

* Fix Z height after tool change (MarlinFirmware#18951)

* Move Cancel Object menu, fix canceled item index (MarlinFirmware#18930)

* Update Italian language (MarlinFirmware#18886)

* Update Slovak language (MarlinFirmware#18884)

* HW PWM sanity checks for SPINDLE_LASER_FREQUENCY (MarlinFirmware#18947)

* Fix IS_PROBE_PIN macro (MarlinFirmware#19024)

Co-authored-by: Scott Lahteine <[email protected]>
Co-authored-by: thinkyhead <[email protected]>
Co-authored-by: Giuliano Zaro <[email protected]>
Co-authored-by: Keith Bennett <[email protected]>
Co-authored-by: Johnny Eshak <[email protected]>
Co-authored-by: Lucas Seiki Oshiro <[email protected]>
Co-authored-by: Jason Smith <[email protected]>
Co-authored-by: InsanityAutomation <[email protected]>
Co-authored-by: cristyanul <[email protected]>
Co-authored-by: JP Flouret <[email protected]>
Co-authored-by: Fabio Santos <[email protected]>
Co-authored-by: Serhiy-K <[email protected]>
Co-authored-by: ellensp <[email protected]>
Co-authored-by: George Fu <[email protected]>
Co-authored-by: Robby Candra <[email protected]>
Co-authored-by: Victor Oliveira <[email protected]>
Co-authored-by: cbteeple <[email protected]>
Co-authored-by: notabucketofspam <[email protected]>
Co-authored-by: Jan-Gerard van der Toorn <[email protected]>
Co-authored-by: Oliver Jean Eifler <[email protected]>
Co-authored-by: ManuelMcLure <[email protected]>
Co-authored-by: GhostlyCrowd <[email protected]>
Co-authored-by: Luc Hoang Long <[email protected]>
Co-authored-by: J.C. Nelson <[email protected]>
Co-authored-by: shuttercat <[email protected]>
Co-authored-by: espr14 <[email protected]>
Co-authored-by: cccc <[email protected]>
Co-authored-by: Julius ter Pelkwijk <[email protected]>
Co-authored-by: Axel <[email protected]>
Co-authored-by: Speaka <[email protected]>
Co-authored-by: Chris Pepper <[email protected]>
Co-authored-by: Leo <[email protected]>
Co-authored-by: Evgeny Z <[email protected]>
Co-authored-by: Sergey1560 <[email protected]>
Co-authored-by: JBA <[email protected]>
Co-authored-by: Markus Towara <[email protected]>
Co-authored-by: yufanyufan <[email protected]>
Co-authored-by: Claus Näveke <[email protected]>
Co-authored-by: cr20-123 <[email protected]>
Co-authored-by: Pascal de Bruijn <[email protected]>
Co-authored-by: Mark Langezaal <[email protected]>
Co-authored-by: Ivan Kravets <[email protected]>
Co-authored-by: Diego von Deschwanden <[email protected]>
Co-authored-by: fleek <[email protected]>
Co-authored-by: MKS-Sean <[email protected]>
Co-authored-by: giryan <[email protected]>
Co-authored-by: Victor Tseng <[email protected]>
Co-authored-by: MoellerDi <[email protected]>
Co-authored-by: natemason <[email protected]>
Co-authored-by: swissnorp <[email protected]>
Co-authored-by: Sebastien Andrivet <[email protected]>
Co-authored-by: FLYmaker <[email protected]>
Co-authored-by: Claus Näveke <[email protected]>
Co-authored-by: cbaugher <[email protected]>
Co-authored-by: Roman Moravčík <[email protected]>
Co-authored-by: Julius Mumme <[email protected]>
HairingX pushed a commit to HairingX/Marlin that referenced this pull request Jun 16, 2021
@Fabi0San @HairingX
Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423)
b1d1fa9
@Fabi0San Fabi0San mentioned this pull request Mar 12, 2022
Closed
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
C: Configuration C: Hosts & Protocols K: Deltabot
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
2 participants
@Fabi0San @thinkyhead