Rpk v4.14 meltdown spectre mitigations #5

ardbiesheuvel · 2018-01-05T23:16:51Z

This is a backport to RPK/v4.14 of the KPTI patches that are queued for v4.16 in the arm64 tree, as well as the HYP branch predictor hardening patches that were sent to LAKML over the past week, including one for Falkor that is built on top of the new BP hardening framework.

Note that this makes KPTI dependent on a newly introduced ID register that defaults to 'affected' for all CPUs, including ones that are known not to be affected by the variant that KPTI addresses (Meltdown). This is in line with the upstream, and KPTI can still be disabled both at build time and at runtime.

In preparation for unmapping the kernel whilst running in userspace, make the kernel mappings non-global so we can avoid expensive TLB invalidation on kernel exit to userspace. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

We're about to rework the way ASIDs are allocated, switch_mm is implemented and low-level kernel entry/exit is handled, so keep the ARM64_SW_TTBR0_PAN code out of the way whilst we do the heavy lifting. It will be re-enabled in a subsequent patch. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

In preparation for mapping kernelspace and userspace with different ASIDs, move the ASID to TTBR1 and update switch_mm to context-switch TTBR0 via an invalid mapping (the zero page). Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

The pre_ttbr0_update_workaround hook is called prior to context-switching TTBR0 because Falkor erratum E1003 can cause TLB allocation with the wrong ASID if both the ASID and the base address of the TTBR are updated at the same time. With the ASID sitting safely in TTBR1, we no longer update things atomically, so we can remove the pre_ttbr0_update_workaround macro as it's no longer required. The erratum infrastructure and documentation is left around for #E1003, as it will be required by the entry trampoline code in a future patch. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

The post_ttbr0_update_workaround hook applies to any change to TTBRx_EL1. Since we're using TTBR1 for the ASID, rename the hook to make it clearer as to what it's doing. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

With the ASID now installed in TTBR1, we can re-enable ARM64_SW_TTBR0_PAN by ensuring that we switch to a reserved ASID of zero when disabling user access and restore the active user ASID on the uaccess enable path. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

In preparation for separate kernel/user ASIDs, allocate them in pairs for each mm_struct. The bottom bit distinguishes the two: if it is set, then the ASID will map only userspace. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

In order for code such as TLB invalidation to operate efficiently when the decision to map the kernel at EL0 is determined at runtime, this patch introduces a helper function, arm64_kernel_unmapped_at_el0, to determine whether or not the kernel is mapped whilst running in userspace. Currently, this just reports the value of CONFIG_UNMAP_KERNEL_AT_EL0, but will later be hooked up to a fake CPU capability using a static key. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Since an mm has both a kernel and a user ASID, we need to ensure that broadcast TLB maintenance targets both address spaces so that things like CoW continue to work with the uaccess primitives in the kernel. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

To allow unmapping of the kernel whilst running at EL0, we need to point the exception vectors at an entry trampoline that can map/unmap the kernel on entry/exit respectively. This patch adds the trampoline page, although it is not yet plugged into the vector table and is therefore unused. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

The exception entry trampoline needs to be mapped at the same virtual address in both the trampoline page table (which maps nothing else) and also the kernel page table, so that we can swizzle TTBR1_EL1 on exceptions from and return to EL0. This patch maps the trampoline at a fixed virtual address in the fixmap area of the kernel virtual address space, which allows the kernel proper to be randomized with respect to the trampoline when KASLR is enabled. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

We will need to treat exceptions from EL0 differently in kernel_ventry, so rework the macro to take the exception level as an argument and construct the branch target using that. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Hook up the entry trampoline to our exception vectors so that all exceptions from and returns to EL0 go via the trampoline, which swizzles the vector base register accordingly. Transitioning to and from the kernel clobbers x30, so we use tpidrro_el0 and far_el1 as scratch registers for native tasks. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

We rely on an atomic swizzling of TTBR1 when transitioning from the entry trampoline to the kernel proper on an exception. We can't rely on this atomicity in the face of Falkor erratum #E1003, so on affected cores we can issue a TLB invalidation to invalidate the walk cache prior to jumping into the kernel. There is still the possibility of a TLB conflict here due to conflicting walk cache entries prior to the invalidation, but this doesn't appear to be the case on these CPUs in practice. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

When unmapping the kernel at EL0, we use tpidrro_el0 as a scratch register during exception entry from native tasks and subsequently zero it in the kernel_ventry macro. We can therefore avoid zeroing tpidrro_el0 in the context-switch path for native tasks using the entry trampoline. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Allow explicit disabling of the entry trampoline on the kernel command line (kpti=off) by adding a fake CPU feature (ARM64_UNMAP_KERNEL_AT_EL0) that can be used to toggle the alternative sequences in our entry code and avoid use of the trampoline altogether if desired. This also allows us to make use of a static key in arm64_kernel_unmapped_at_el0(). Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Add a Kconfig entry to control use of the entry trampoline, which allows us to unmap the kernel whilst running in userspace and improve the robustness of KASLR. Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

There are now a handful of open-coded masks to extract the ASID from a TTBR value, so introduce a TTBR_ASID_MASK and use that instead. Suggested-by: Mark Rutland <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

The literal pool entry for identifying the vectors base is the only piece of information in the trampoline page that identifies the true location of the kernel. This patch moves it into a page-aligned region of the .rodata section and maps this adjacent to the trampoline text via an additional fixmap entry, which protects against any accidental leakage of the trampoline contents. Suggested-by: Ard Biesheuvel <[email protected]> Tested-by: Laura Abbott <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Speculation attacks against the entry trampoline can potentially resteer the speculative instruction stream through the indirect branch and into arbitrary gadgets within the kernel. This patch defends against these attacks by forcing a misprediction through the return stack: a dummy BL instruction loads an entry into the stack, so that the predicted program flow of the subsequent RET instruction is to a branch-to-self instruction which is finally resolved as a branch to the kernel vectors with speculation suppressed. Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Although CONFIG_UNMAP_KERNEL_AT_EL0 does make KASLR more robust, it's actually more useful as a mitigation against speculation attacks that can leak arbitrary kernel data to userspace through speculation. Reword the Kconfig help message to reflect this, and make the option depend on EXPERT so that it is on by default for the majority of users. Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

For non-KASLR kernels where the KPTI behaviour has not been overridden on the command line we can use ID_AA64PFR0_EL1.CSV3 to determine whether or not we should unmap the kernel whilst running at EL0. Reviewed-by: Suzuki K Poulose <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

In order to invoke the CPU capability ->matches callback from the ->enable callback for applying local-CPU workarounds, we need a handle on the capability structure. This patch passes a pointer to the capability structure to the ->enable callback. Reviewed-by: Suzuki K Poulose <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Entry into recent versions of ARM Trusted Firmware will invalidate the CPU branch predictor state in order to protect against aliasing attacks. This patch exposes the PSCI "VERSION" function via psci_ops, so that it can be invoked outside of the PSCI driver where necessary. Acked-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

We will soon need to invoke a CPU-specific function pointer after changing page tables, so move post_ttbr_update_workaround out into C code to make this possible. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

…ttacks Aliasing attacks against CPU branch predictors can allow an attacker to redirect speculative control flow on some CPUs and potentially divulge information from one context to another. This patch adds initial skeleton code behind a new Kconfig option to enable implementation-specific mitigations against these attacks for CPUs that are affected. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Now that we have per-CPU vectors, let's plug then in the KVM/arm64 code. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

For those CPUs that require PSCI to perform a BP invalidation, going all the way to the PSCI code for not much is a waste of precious cycles. Let's terminate that call as early as possible. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Hook up MIDR values for the Cortex-A72 and Cortex-A75 CPUs, since they will soon need MIDR matches for hardening the branch predictor. Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

Cortex-A57, A72, A73 and A75 are susceptible to branch predictor aliasing and can theoretically be attacked by malicious code. This patch implements a PSCI-based mitigation for these CPUs when available. The call into firmware will invalidate the branch predictor state, preventing any malicious entries from affecting other victim contexts. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> [ardb: fix incorrect stack offset in __psci_hyp_bp_inval_start()] Signed-off-by: Ard Biesheuvel <[email protected]>

ndechesne · 2018-01-08T20:30:05Z

hi @ardbiesheuvel , i would like to include an up-to-date patchset for this issue in our Dragonboard Linux release, and I have just noticed this PR from you. Our releases are also based on 4.14, do you think i should safely take all patches from this patch series and be done? is anyone at linaro planning to maintain a 'dev' branch with the backport (at least until it gets merged/backported in LTS)?

ardbiesheuvel · 2018-01-08T20:33:50Z

On 8 January 2018 at 20:30, Nicolas Dechesne ***@***.***> wrote: hi @ardbiesheuvel <https://github.com/ardbiesheuvel> , i would like to include an up-to-date patchset for this issue in our Dragonboard Linux release, and I have just noticed this PR from you. Our releases are also based on 4.14, do you think i should safely take all patches from this patch series and be done? is anyone at linaro planning to maintain a 'dev' branch with the backport (at least until it gets merged/backported in LTS)?

Please ignore that pull request for now. I am aligning with the arm64 maintainers to create a v4.14 backport that is also suitable for upstream v4.14 LTS, rather than something that is only suitable for RPK I am currently working on it, and should have something to share by tomorrow. Thanks, Ard.

ndechesne · 2018-01-08T20:36:42Z

ok, that seems even better!

ardbiesheuvel · 2018-01-09T18:59:55Z

On 8 January 2018 at 20:36, Nicolas Dechesne ***@***.***> wrote: ok, that seems even better!

There are some stability issues with the patches so we'll need to hold off for a bit.

It was reported by Sergey Senozhatsky that if THP (Transparent Huge Page) and frontswap (via zswap) are both enabled, when memory goes low so that swap is triggered, segfault and memory corruption will occur in random user space applications as follow, kernel: urxvt[338]: segfault at 20 ip 00007fc08889ae0d sp 00007ffc73a7fc40 error 6 in libc-2.26.so[7fc08881a000+1ae000] #0 0x00007fc08889ae0d _int_malloc (libc.so.6) #1 0x00007fc08889c2f3 malloc (libc.so.6) #2 0x0000560e6004bff7 _Z14rxvt_wcstoutf8PKwi (urxvt) #3 0x0000560e6005e75c n/a (urxvt) #4 0x0000560e6007d9f1 _ZN16rxvt_perl_interp6invokeEP9rxvt_term9hook_typez (urxvt) #5 0x0000560e6003d988 _ZN9rxvt_term9cmd_parseEv (urxvt) #6 0x0000560e60042804 _ZN9rxvt_term6pty_cbERN2ev2ioEi (urxvt) torvalds#7 0x0000560e6005c10f _Z17ev_invoke_pendingv (urxvt) torvalds#8 0x0000560e6005cb55 ev_run (urxvt) torvalds#9 0x0000560e6003b9b9 main (urxvt) torvalds#10 0x00007fc08883af4a __libc_start_main (libc.so.6) torvalds#11 0x0000560e6003f9da _start (urxvt) After bisection, it was found the first bad commit is bd4c82c ("mm, THP, swap: delay splitting THP after swapped out"). The root cause is as follows: When the pages are written to swap device during swapping out in swap_writepage(), zswap (fontswap) is tried to compress the pages to improve performance. But zswap (frontswap) will treat THP as a normal page, so only the head page is saved. After swapping in, tail pages will not be restored to their original contents, causing memory corruption in the applications. This is fixed by refusing to save page in the frontswap store functions if the page is a THP. So that the THP will be swapped out to swap device. Another choice is to split THP if frontswap is enabled. But it is found that the frontswap enabling isn't flexible. For example, if CONFIG_ZSWAP=y (cannot be module), frontswap will be enabled even if zswap itself isn't enabled. Frontswap has multiple backends, to make it easy for one backend to enable THP support, the THP checking is put in backend frontswap store functions instead of the general interfaces. Link: http://lkml.kernel.org/r/[email protected] Fixes: bd4c82c ("mm, THP, swap: delay splitting THP after swapped out") Signed-off-by: "Huang, Ying" <[email protected]> Reported-by: Sergey Senozhatsky <[email protected]> Tested-by: Sergey Senozhatsky <[email protected]> Suggested-by: Minchan Kim <[email protected]> [put THP checking in backend] Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: Dan Streetman <[email protected]> Cc: Seth Jennings <[email protected]> Cc: Tetsuo Handa <[email protected]> Cc: Shaohua Li <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: <[email protected]> [4.14] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Currently we can crash perf record when running in pipe mode, like: $ perf record ls | perf report # To display the perf.data header info, please use --header/--header-only options. # perf: Segmentation fault Error: The - file has no samples! The callstack of the crash is: 0x0000000000515242 in perf_event__synthesize_event_update_name 3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]); (gdb) bt #0 0x0000000000515242 in perf_event__synthesize_event_update_name #1 0x00000000005158a4 in perf_event__synthesize_extra_attr #2 0x0000000000443347 in record__synthesize #3 0x00000000004438e3 in __cmd_record #4 0x000000000044514e in cmd_record #5 0x00000000004cbc95 in run_builtin #6 0x00000000004cbf02 in handle_internal_command torvalds#7 0x00000000004cc054 in run_argv torvalds#8 0x00000000004cc422 in main The reason of the crash is that the evsel does not have ids array allocated and the pipe's synthesize code tries to access it. We don't force evsel ids allocation when we have single event, because it's not needed. However we need it when we are in pipe mode even for single event as a key for evsel update event. Fixing this by forcing evsel ids allocation event for single event, when we are in pipe mode. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

[ Upstream commit d754941 ] If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 torvalds#7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe torvalds#8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 torvalds#9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <[email protected]> Reviewed-by: Lee Duncan <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2c0aa08 ] Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 torvalds#7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 torvalds#8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] torvalds#9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 torvalds#10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 torvalds#11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] torvalds#7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] torvalds#8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Signed-off-by: Guanglei Li <[email protected]> Signed-off-by: Honglei Wang <[email protected]> Reviewed-by: Junxiao Bi <[email protected]> Reviewed-by: Yanjun Zhu <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Acked-by: Doug Ledford <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit af50e4b ] syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread torvalds#32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ torvalds#26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed8 ("nsh: add GSO support") Signed-off-by: Eric Dumazet <[email protected]> Cc: Jiri Benc <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit c171654 upstream. stub_probe() calls put_busid_priv() in an error path when device isn't found in the busid_table. Fix it by making put_busid_priv() safe to be called with null struct bus_id_priv pointer. This problem happens when "usbip bind" is run without loading usbip_host driver and then running modprobe. The first failed bind attempt unbinds the device from the original driver and when usbip_host is modprobed, stub_probe() runs and doesn't find the device in its busid table and calls put_busid_priv(0 with null bus_id_priv pointer. usbip-host 3-10.2: 3-10.2 is not in match_busid table... skip! [ 367.359679] ===================================== [ 367.359681] WARNING: bad unlock balance detected! [ 367.359683] 4.17.0-rc4+ #5 Not tainted [ 367.359685] ------------------------------------- [ 367.359688] modprobe/2768 is trying to release lock ( [ 367.359689] ================================================================== [ 367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110 [ 367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768 [ 367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5 Fixes: 2207655 ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit af50e4b ] syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread torvalds#32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 torvalds#47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] torvalds#47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ torvalds#26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed8 ("nsh: add GSO support") Signed-off-by: Eric Dumazet <[email protected]> Cc: Jiri Benc <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit c171654 upstream. stub_probe() calls put_busid_priv() in an error path when device isn't found in the busid_table. Fix it by making put_busid_priv() safe to be called with null struct bus_id_priv pointer. This problem happens when "usbip bind" is run without loading usbip_host driver and then running modprobe. The first failed bind attempt unbinds the device from the original driver and when usbip_host is modprobed, stub_probe() runs and doesn't find the device in its busid table and calls put_busid_priv(0 with null bus_id_priv pointer. usbip-host 3-10.2: 3-10.2 is not in match_busid table... skip! [ 367.359679] ===================================== [ 367.359681] WARNING: bad unlock balance detected! [ 367.359683] 4.17.0-rc4+ #5 Not tainted [ 367.359685] ------------------------------------- [ 367.359688] modprobe/2768 is trying to release lock ( [ 367.359689] ================================================================== [ 367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110 [ 367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768 [ 367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5 Fixes: 2207655 ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit fca3234 ] Executing command 'perf stat -T -- ls' dumps core on x86 and s390. Here is the call back chain (done on x86): # gdb ./perf .... (gdb) r stat -T -- ls ... Program received signal SIGSEGV, Segmentation fault. 0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6 (gdb) where #0 0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6 #1 0x00007ffff56ae484 in asprintf () from /lib64/libc.so.6 #2 0x00000000004f1982 in __parse_events_add_pmu (parse_state=0x7fffffffd580, list=0xbfb970, name=0xbf3ef0 "cpu", head_config=0xbfb930, auto_merge_stats=false) at util/parse-events.c:1233 #3 0x00000000004f1c8e in parse_events_add_pmu (parse_state=0x7fffffffd580, list=0xbfb970, name=0xbf3ef0 "cpu", head_config=0xbfb930) at util/parse-events.c:1288 #4 0x0000000000537ce3 in parse_events_parse (_parse_state=0x7fffffffd580, scanner=0xbf4210) at util/parse-events.y:234 #5 0x00000000004f2c7a in parse_events__scanner (str=0x6b66c0 "task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}", parse_state=0x7fffffffd580, start_token=258) at util/parse-events.c:1673 #6 0x00000000004f2e23 in parse_events (evlist=0xbe9990, str=0x6b66c0 "task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}", err=0x0) at util/parse-events.c:1713 torvalds#7 0x000000000044e137 in add_default_attributes () at builtin-stat.c:2281 torvalds#8 0x000000000044f7b5 in cmd_stat (argc=1, argv=0x7fffffffe3b0) at builtin-stat.c:2828 torvalds#9 0x00000000004c8b0f in run_builtin (p=0xab01a0 <commands+288>, argc=4, argv=0x7fffffffe3b0) at perf.c:297 torvalds#10 0x00000000004c8d7c in handle_internal_command (argc=4, argv=0x7fffffffe3b0) at perf.c:349 torvalds#11 0x00000000004c8ece in run_argv (argcp=0x7fffffffe20c, argv=0x7fffffffe200) at perf.c:393 torvalds#12 0x00000000004c929c in main (argc=4, argv=0x7fffffffe3b0) at perf.c:537 (gdb) It turns out that a NULL pointer is referenced. Here are the function calls: ... cmd_stat() +---> add_default_attributes() +---> parse_events(evsel_list, transaction_attrs, NULL); 3rd parameter set to NULL Function parse_events(xx, xx, struct parse_events_error *err) dives into a bison generated scanner and creates parser state information for it first: struct parse_events_state parse_state = { .list = LIST_HEAD_INIT(parse_state.list), .idx = evlist->nr_entries, .error = err, <--- NULL POINTER !!! .evlist = evlist, }; Now various functions inside the bison scanner are called to end up in __parse_events_add_pmu(struct parse_events_state *parse_state, ..) with first parameter being a pointer to above structure definition. Now the PMU event name is not found (because being executed in a VM) and this function tries to create an error message with asprintf(&parse_state->error.str, ....) which references a NULL pointer and dumps core. Fix this by providing a pointer to the necessary error information instead of NULL. Technically only the else part is needed to avoid the core dump, just lets be safe... Signed-off-by: Thomas Richter <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2bbea6e ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 torvalds#7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] torvalds#8 [ffff880078447da8] mount_bdev at ffffffff81202570 torvalds#9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] torvalds#10 [ffff880078447e28] mount_fs at ffffffff81202d09 torvalds#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f torvalds#12 [ffff880078447ea8] do_mount at ffffffff81220fee torvalds#13 [ffff880078447f28] sys_mount at ffffffff812218d6 torvalds#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de torvalds#7 [ffff880078417a40] flush_disk at ffffffff8123a94b torvalds#8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 torvalds#9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] torvalds#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] torvalds#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 torvalds#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 torvalds#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b torvalds#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 torvalds#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf torvalds#16 [ffff880078417d00] do_last at ffffffff8120d53d torvalds#17 [ffff880078417db0] path_openat at ffffffff8120e6b2 torvalds#18 [ffff880078417e48] do_filp_open at ffffffff8121082b torvalds#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 torvalds#20 [ffff880078417f70] sys_open at ffffffff811fde4e torvalds#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit b23220f upstream. The balloon.page field is used for two different purposes if batching is on or off. If batching is on, the field point to the page which is used to communicate with with the hypervisor. If it is off, balloon.page points to the page that is about to be (un)locked. Unfortunately, this dual-purpose of the field introduced a bug: when the balloon is popped (e.g., when the machine is reset or the balloon driver is explicitly removed), the balloon driver frees, unconditionally, the page that is held in balloon.page. As a result, if batching is disabled, this leads to double freeing the last page that is sent to the hypervisor. The following error occurs during rmmod when kernel checkers are on, and the balloon is not empty: [ 42.307653] ------------[ cut here ]------------ [ 42.307657] Kernel BUG at ffffffffba1e4b28 [verbose debug info unavailable] [ 42.307720] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 42.312512] Modules linked in: vmw_vsock_vmci_transport vsock ppdev joydev vmw_balloon(-) input_leds serio_raw vmw_vmci parport_pc shpchp parport i2c_piix4 nfit mac_hid autofs4 vmwgfx drm_kms_helper hid_generic syscopyarea sysfillrect usbhid sysimgblt fb_sys_fops hid ttm mptspi scsi_transport_spi ahci mptscsih drm psmouse vmxnet3 libahci mptbase pata_acpi [ 42.312766] CPU: 10 PID: 1527 Comm: rmmod Not tainted 4.12.0+ #5 [ 42.312803] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2016 [ 42.313042] task: ffff9bf9680f8000 task.stack: ffffbfefc1638000 [ 42.313290] RIP: 0010:__free_pages+0x38/0x40 [ 42.313510] RSP: 0018:ffffbfefc163be98 EFLAGS: 00010246 [ 42.313731] RAX: 000000000000003e RBX: ffffffffc02b9720 RCX: 0000000000000006 [ 42.313972] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9bf97e08e0a0 [ 42.314201] RBP: ffffbfefc163be98 R08: 0000000000000000 R09: 0000000000000000 [ 42.314435] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffc02b97e4 [ 42.314505] R13: ffffffffc02b9748 R14: ffffffffc02b9728 R15: 0000000000000200 [ 42.314550] FS: 00007f3af5fec700(0000) GS:ffff9bf97e080000(0000) knlGS:0000000000000000 [ 42.314599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.314635] CR2: 00007f44f6f4ab24 CR3: 00000003a7d12000 CR4: 00000000000006e0 [ 42.314864] Call Trace: [ 42.315774] vmballoon_pop+0x102/0x130 [vmw_balloon] [ 42.315816] vmballoon_exit+0x42/0xd64 [vmw_balloon] [ 42.315853] SyS_delete_module+0x1e2/0x250 [ 42.315891] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 42.315924] RIP: 0033:0x7f3af5b0e8e7 [ 42.315949] RSP: 002b:00007fffe6ce0148 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 42.315996] RAX: ffffffffffffffda RBX: 000055be676401e0 RCX: 00007f3af5b0e8e7 [ 42.316951] RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055be67640248 [ 42.317887] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [ 42.318845] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fffe6cdf130 [ 42.319755] R13: 0000000000000000 R14: 0000000000000000 R15: 000055be676401e0 [ 42.320606] Code: c0 74 1c f0 ff 4f 1c 74 02 5d c3 85 f6 74 07 e8 0f d8 ff ff 5d c3 31 f6 e8 c6 fb ff ff 5d c3 48 c7 c6 c8 0f c5 ba e8 58 be 02 00 <0f> 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 85 ff 75 01 c3 55 48 [ 42.323462] RIP: __free_pages+0x38/0x40 RSP: ffffbfefc163be98 [ 42.325735] ---[ end trace 872e008e33f81508 ]--- To solve the bug, we eliminate the dual purpose of balloon.page. Fixes: f220a80 ("VMware balloon: add batching to the vmw_balloon.") Cc: [email protected] Reported-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Gil Kupfer <[email protected]> Signed-off-by: Nadav Amit <[email protected]> Reviewed-by: Xavier Deguillard <[email protected]> Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…eadlock commit 0ee223b upstream. A long time ago the unfortunate decision was taken to add a self-deletion attribute to the sysfs SCSI device directory. That decision was unfortunate because self-deletion is really tricky. We can't drop that attribute because widely used user space software depends on it, namely the rescan-scsi-bus.sh script. Hence this patch that avoids that writing into that attribute triggers a deadlock. See also commit 7973cbd ("[PATCH] add sysfs attributes to scan and delete scsi_devices"). This patch avoids that self-removal triggers the following deadlock: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc2-dbg+ #5 Not tainted ------------------------------------------------------ modprobe/6539 is trying to acquire lock: 000000008323c4cd (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x45/0x90 but task is already holding lock: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&shost->scan_mutex){+.+.}: __mutex_lock+0xfe/0xc70 mutex_lock_nested+0x1b/0x20 scsi_remove_device+0x26/0x40 [scsi_mod] sdev_store_delete+0x27/0x30 [scsi_mod] dev_attr_store+0x3e/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x190/0x230 __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#202){++++}: lock_acquire+0xd2/0x260 __kernfs_remove+0x424/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x82/0xb0 device_del+0x251/0x580 __scsi_remove_device+0x19f/0x1d0 [scsi_mod] scsi_forget_host+0x37/0xb0 [scsi_mod] scsi_remove_host+0x9b/0x150 [scsi_mod] sdebug_driver_remove+0x4b/0x150 [scsi_debug] device_release_driver_internal+0x241/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1bc/0x290 device_del+0x259/0x580 device_unregister+0x1a/0x70 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug] scsi_debug_exit+0x76/0xe8 [scsi_debug] __x64_sys_delete_module+0x1c1/0x280 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&shost->scan_mutex); lock(kn->count#202); lock(&shost->scan_mutex); lock(kn->count#202); *** DEADLOCK *** 2 locks held by modprobe/6539: #0: 00000000efaf9298 (&dev->mutex){....}, at: device_release_driver_internal+0x68/0x360 #1: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod] stack backtrace: CPU: 10 PID: 6539 Comm: modprobe Not tainted 4.18.0-rc2-dbg+ #5 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_circular_bug.isra.34+0x213/0x221 __lock_acquire+0x1a7e/0x1b50 lock_acquire+0xd2/0x260 __kernfs_remove+0x424/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x82/0xb0 device_del+0x251/0x580 __scsi_remove_device+0x19f/0x1d0 [scsi_mod] scsi_forget_host+0x37/0xb0 [scsi_mod] scsi_remove_host+0x9b/0x150 [scsi_mod] sdebug_driver_remove+0x4b/0x150 [scsi_debug] device_release_driver_internal+0x241/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1bc/0x290 device_del+0x259/0x580 device_unregister+0x1a/0x70 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug] scsi_debug_exit+0x76/0xe8 [scsi_debug] __x64_sys_delete_module+0x1c1/0x280 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe See also https://www.mail-archive.com/[email protected]/msg54525.html. Fixes: ac0ece9 ("scsi: use device_remove_file_self() instead of device_schedule_callback()") Signed-off-by: Bart Van Assche <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Acked-by: Tejun Heo <[email protected]> Cc: Johannes Thumshirn <[email protected]> Cc: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e torvalds#7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c torvalds#8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 torvalds#9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 torvalds#10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c torvalds#11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b torvalds#12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 torvalds#13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b torvalds#14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a torvalds#15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 torvalds#16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 torvalds#17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a torvalds#18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 torvalds#19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d torvalds#20 [ffff88085c6dbeb0] kthread at ffffffff81096384 torvalds#21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 286e877 upstream. Commit efda1b5 ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") Introduced additional hardening for ambiguity in the ACPI spec for ars_status output sizing. However, it had a couple of cases mixed up. Where it should have been checking for (and returning) "out_field[1] - 4" it was using "out_field[1] - 8" and vice versa. This caused a four byte discrepancy in the buffer size passed on to the command handler, and in some cases, this caused memory corruption like: ./daxdev-errors.sh: line 76: 24104 Aborted (core dumped) ./daxdev-errors $busdev $region malloc(): memory corruption Program received signal SIGABRT, Aborted. [...] #5 0x00007ffff7865a2e in calloc () from /lib64/libc.so.6 #6 0x00007ffff7bc2970 in ndctl_bus_cmd_new_ars_status (ars_cap=ars_cap@entry=0x6153b0) at ars.c:136 torvalds#7 0x0000000000401644 in check_ars_status (check=0x7fffffffdeb0, bus=0x604c20) at daxdev-errors.c:144 torvalds#8 test_daxdev_clear_error (region_name=<optimized out>, bus_name=<optimized out>) at daxdev-errors.c:332 Cc: <[email protected]> Cc: Dave Jiang <[email protected]> Cc: Keith Busch <[email protected]> Cc: Lukasz Dorau <[email protected]> Cc: Dan Williams <[email protected]> Fixes: efda1b5 ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") Signed-off-by: Vishal Verma <[email protected]> Reviewed-by: Keith Busch <[email protected]> Signed-of-by: Dave Jiang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a1933c0 ] [ 155.018460] ====================================================== [ 155.021431] WARNING: possible circular locking dependency detected [ 155.024339] 4.18.0-rc3+ #5 Tainted: G OE [ 155.026879] ------------------------------------------------------ [ 155.029783] umount/2901 is trying to acquire lock: [ 155.032187] 00000000c4282f1f (kn->count#130){++++}, at: kernfs_remove+0x1f/0x30 [ 155.035439] [ 155.035439] but task is already holding lock: [ 155.038892] 0000000056e4307b (&type->s_umount_key#41){++++}, at: deactivate_super+0x33/0x50 [ 155.042602] [ 155.042602] which lock already depends on the new lock. [ 155.042602] [ 155.047465] [ 155.047465] the existing dependency chain (in reverse order) is: [ 155.051354] [ 155.051354] -> #1 (&type->s_umount_key#41){++++}: [ 155.054768] f2fs_sbi_store+0x61/0x460 [f2fs] [ 155.057083] kernfs_fop_write+0x113/0x1a0 [ 155.059277] __vfs_write+0x36/0x180 [ 155.061250] vfs_write+0xbe/0x1b0 [ 155.063179] ksys_write+0x55/0xc0 [ 155.065068] do_syscall_64+0x60/0x1b0 [ 155.067071] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 155.069529] [ 155.069529] -> #0 (kn->count#130){++++}: [ 155.072421] __kernfs_remove+0x26f/0x2e0 [ 155.074452] kernfs_remove+0x1f/0x30 [ 155.076342] kobject_del.part.5+0xe/0x40 [ 155.078354] f2fs_put_super+0x12d/0x290 [f2fs] [ 155.080500] generic_shutdown_super+0x6c/0x110 [ 155.082655] kill_block_super+0x21/0x50 [ 155.084634] kill_f2fs_super+0x9c/0xc0 [f2fs] [ 155.086726] deactivate_locked_super+0x3f/0x70 [ 155.088826] cleanup_mnt+0x3b/0x70 [ 155.090584] task_work_run+0x93/0xc0 [ 155.092367] exit_to_usermode_loop+0xf0/0x100 [ 155.094466] do_syscall_64+0x162/0x1b0 [ 155.096312] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 155.098603] [ 155.098603] other info that might help us debug this: [ 155.098603] [ 155.102418] Possible unsafe locking scenario: [ 155.102418] [ 155.105134] CPU0 CPU1 [ 155.107037] ---- ---- [ 155.108910] lock(&type->s_umount_key#41); [ 155.110674] lock(kn->count#130); [ 155.113010] lock(&type->s_umount_key#41); [ 155.115608] lock(kn->count#130); Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 46b3722 ] We occasionaly hit following assert failure in 'perf top', when processing the /proc info in multiple threads. perf: ...include/linux/refcount.h:109: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed. The gdb backtrace looks like this: [Switching to Thread 0x7ffff11ba700 (LWP 13749)] 0x00007ffff50839fb in raise () from /lib64/libc.so.6 (gdb) #0 0x00007ffff50839fb in raise () from /lib64/libc.so.6 #1 0x00007ffff5085800 in abort () from /lib64/libc.so.6 #2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6 #3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6 #4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0) at ...include/linux/refcount.h:109 #5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0) at util/comm.c:24 #6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:72 torvalds#7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:95 torvalds#8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2", timestamp=0, exec=false) at util/comm.c:111 torvalds#9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57 torvalds#10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38, threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457 torvalds#11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38, ... The failing assertion is this one: REFCOUNT_WARN(!refcount_inc_not_zero(r), ... The problem is that we keep global comm_str_root list, which is accessed by multiple threads during the 'perf top' startup and following 2 paths can race: thread 1: ... thread__new comm__new comm_str__findnew down_write(&comm_str_lock); __comm_str__findnew comm_str__get thread 2: ... comm__override or comm__free comm_str__put refcount_dec_and_test down_write(&comm_str_lock); rb_erase(&cs->rb_node, &comm_str_root); Because thread 2 first decrements the refcnt and only after then it removes the struct comm_str from the list, the thread 1 can find this object on the list with refcnt equls to 0 and hit the assert. This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects that already dropped the refcnt to 0. For the rest of the objects we take the refcnt before comparing its name and release it afterwards with comm_str__put, which can also release the object completely. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Kan Liang <[email protected]> Cc: Lukasz Odzioba <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 3e1a127 upstream. When we disable hotplugging on the GPU, we need to be able to synchronize with each connector's hotplug interrupt handler before the interrupt is finally disabled. This can be a problem however, since nouveau_connector_detect() currently grabs a runtime power reference when handling connector probing. This will deadlock the runtime suspend handler like so: [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds. [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.486332] kworker/0:2 D 0 61 2 0x80000000 [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau] [ 861.487737] Call Trace: [ 861.488394] __schedule+0x322/0xaf0 [ 861.489070] schedule+0x33/0x90 [ 861.489744] rpm_resume+0x19c/0x850 [ 861.490392] ? finish_wait+0x90/0x90 [ 861.491068] __pm_runtime_resume+0x4e/0x90 [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau] [ 861.492416] process_one_work+0x231/0x620 [ 861.493068] worker_thread+0x44/0x3a0 [ 861.493722] kthread+0x12b/0x150 [ 861.494342] ? wq_pool_ids_show+0x140/0x140 [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.495648] ret_from_fork+0x3a/0x50 [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds. [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.498341] kworker/6:2 D 0 320 2 0x80000080 [ 861.499045] Workqueue: pm pm_runtime_work [ 861.499739] Call Trace: [ 861.500428] __schedule+0x322/0xaf0 [ 861.501134] ? wait_for_completion+0x104/0x190 [ 861.501851] schedule+0x33/0x90 [ 861.502564] schedule_timeout+0x3a5/0x590 [ 861.503284] ? mark_held_locks+0x58/0x80 [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40 [ 861.504710] ? wait_for_completion+0x104/0x190 [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190 [ 861.506136] ? wait_for_completion+0x104/0x190 [ 861.506845] wait_for_completion+0x12c/0x190 [ 861.507555] ? wake_up_q+0x80/0x80 [ 861.508268] flush_work+0x1c9/0x280 [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau] [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau] [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau] [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau] [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau] [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180 [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.514897] __rpm_callback+0x7a/0x1d0 [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.516313] rpm_callback+0x24/0x80 [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.517741] rpm_suspend+0x142/0x6b0 [ 861.518449] pm_runtime_work+0x97/0xc0 [ 861.519144] process_one_work+0x231/0x620 [ 861.519831] worker_thread+0x44/0x3a0 [ 861.520522] kthread+0x12b/0x150 [ 861.521220] ? wq_pool_ids_show+0x140/0x140 [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.522622] ret_from_fork+0x3a/0x50 [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds. [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000 [ 861.526073] Workqueue: events nvif_notify_work [nouveau] [ 861.526751] Call Trace: [ 861.527411] __schedule+0x322/0xaf0 [ 861.528089] schedule+0x33/0x90 [ 861.528758] rpm_resume+0x19c/0x850 [ 861.529399] ? finish_wait+0x90/0x90 [ 861.530073] __pm_runtime_resume+0x4e/0x90 [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau] [ 861.531459] ? ww_mutex_lock+0x47/0x80 [ 861.532097] ? ww_mutex_lock+0x47/0x80 [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm] [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper] [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper] [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau] [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau] [ 861.536221] process_one_work+0x231/0x620 [ 861.536994] worker_thread+0x44/0x3a0 [ 861.537757] kthread+0x12b/0x150 [ 861.538463] ? wq_pool_ids_show+0x140/0x140 [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.539815] ret_from_fork+0x3a/0x50 [ 861.540521] Showing all locks held in the system: [ 861.541696] 2 locks held by kworker/0:2/61: [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543814] 1 lock held by khungtaskd/64: [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 861.545160] 3 locks held by kworker/6:2/320: [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau] [ 861.548146] 1 lock held by dmesg/983: [ 861.548889] 2 locks held by zsh/1250: [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 861.551122] 6 locks held by kworker/6:0/1329: [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.552765] #1: 00000000ddb499ad ((work_completion)(&notify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper] [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper] [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper] [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm] [ 861.557864] ============================================= [ 861.559507] NMI backtrace for cpu 2 [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 861.561948] Call Trace: [ 861.562757] dump_stack+0x8e/0xd3 [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42 [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20 [ 861.566558] watchdog+0x316/0x580 [ 861.567355] kthread+0x12b/0x150 [ 861.568114] ? reset_hung_task_detector+0x20/0x20 [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.569598] ret_from_fork+0x3a/0x50 [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7: [ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120 [ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120 [ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120 [ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120 [ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120 [ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120 [ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120 [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks So: fix this by making it so that normal hotplug handling /only/ happens so long as the GPU is currently awake without any pending runtime PM requests. In the event that a hotplug occurs while the device is suspending or resuming, we can simply defer our response until the GPU is fully runtime resumed again. Changes since v4: - Use a new trick I came up with using pm_runtime_get() instead of the hackish junk we had before Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Acked-by: Daniel Vetter <[email protected]> Cc: [email protected] Cc: Lukas Wunner <[email protected]> Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit c495144 upstream. We're getting a lockdep splat because we take the dio_sem under the log_mutex. What we really need is to protect fsync() from logging an extent map for an extent we never waited on higher up, so just guard the whole thing with dio_sem. ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 torvalds#411 Not tainted ------------------------------------------------------ aio-dio-invalid/30928 is trying to acquire lock: 0000000092621cfd (&mm->mmap_sem){++++}, at: get_user_pages_unlocked+0x5a/0x1e0 but task is already holding lock: 00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&ei->dio_sem){++++}: lock_acquire+0xbd/0x220 down_write+0x51/0xb0 btrfs_log_changed_extents+0x80/0xa40 btrfs_log_inode+0xbaf/0x1000 btrfs_log_inode_parent+0x26f/0xa80 btrfs_log_dentry_safe+0x50/0x70 btrfs_sync_file+0x357/0x540 do_fsync+0x38/0x60 __ia32_sys_fdatasync+0x12/0x20 do_fast_syscall_32+0x9a/0x2f0 entry_SYSENTER_compat+0x84/0x96 -> #4 (&ei->log_mutex){+.+.}: lock_acquire+0xbd/0x220 __mutex_lock+0x86/0xa10 btrfs_record_unlink_dir+0x2a/0xa0 btrfs_unlink+0x5a/0xc0 vfs_unlink+0xb1/0x1a0 do_unlinkat+0x264/0x2b0 do_fast_syscall_32+0x9a/0x2f0 entry_SYSENTER_compat+0x84/0x96 -> #3 (sb_internal#2){.+.+}: lock_acquire+0xbd/0x220 __sb_start_write+0x14d/0x230 start_transaction+0x3e6/0x590 btrfs_evict_inode+0x475/0x640 evict+0xbf/0x1b0 btrfs_run_delayed_iputs+0x6c/0x90 cleaner_kthread+0x124/0x1a0 kthread+0x106/0x140 ret_from_fork+0x3a/0x50 -> #2 (&fs_info->cleaner_delayed_iput_mutex){+.+.}: lock_acquire+0xbd/0x220 __mutex_lock+0x86/0xa10 btrfs_alloc_data_chunk_ondemand+0x197/0x530 btrfs_check_data_free_space+0x4c/0x90 btrfs_delalloc_reserve_space+0x20/0x60 btrfs_page_mkwrite+0x87/0x520 do_page_mkwrite+0x31/0xa0 __handle_mm_fault+0x799/0xb00 handle_mm_fault+0x7c/0xe0 __do_page_fault+0x1d3/0x4a0 async_page_fault+0x1e/0x30 -> #1 (sb_pagefaults){.+.+}: lock_acquire+0xbd/0x220 __sb_start_write+0x14d/0x230 btrfs_page_mkwrite+0x6a/0x520 do_page_mkwrite+0x31/0xa0 __handle_mm_fault+0x799/0xb00 handle_mm_fault+0x7c/0xe0 __do_page_fault+0x1d3/0x4a0 async_page_fault+0x1e/0x30 -> #0 (&mm->mmap_sem){++++}: __lock_acquire+0x42e/0x7a0 lock_acquire+0xbd/0x220 down_read+0x48/0xb0 get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_fast+0xa4/0x150 iov_iter_get_pages+0xc3/0x340 do_direct_IO+0xf93/0x1d70 __blockdev_direct_IO+0x32d/0x1c20 btrfs_direct_IO+0x227/0x400 generic_file_direct_write+0xcf/0x180 btrfs_file_write_iter+0x308/0x58c aio_write+0xf8/0x1d0 io_submit_one+0x3a9/0x620 __ia32_compat_sys_io_submit+0xb2/0x270 do_int80_syscall_32+0x5b/0x1a0 entry_INT80_compat+0x88/0xa0 other info that might help us debug this: Chain exists of: &mm->mmap_sem --> &ei->log_mutex --> &ei->dio_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->dio_sem); lock(&ei->log_mutex); lock(&ei->dio_sem); lock(&mm->mmap_sem); *** DEADLOCK *** 1 lock held by aio-dio-invalid/30928: #0: 00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400 stack backtrace: CPU: 0 PID: 30928 Comm: aio-dio-invalid Not tainted 4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 torvalds#411 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Call Trace: dump_stack+0x7c/0xbb print_circular_bug.isra.37+0x297/0x2a4 check_prev_add.constprop.45+0x781/0x7a0 ? __lock_acquire+0x42e/0x7a0 validate_chain.isra.41+0x7f0/0xb00 __lock_acquire+0x42e/0x7a0 lock_acquire+0xbd/0x220 ? get_user_pages_unlocked+0x5a/0x1e0 down_read+0x48/0xb0 ? get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_unlocked+0x5a/0x1e0 get_user_pages_fast+0xa4/0x150 iov_iter_get_pages+0xc3/0x340 do_direct_IO+0xf93/0x1d70 ? __alloc_workqueue_key+0x358/0x490 ? __blockdev_direct_IO+0x14b/0x1c20 __blockdev_direct_IO+0x32d/0x1c20 ? btrfs_run_delalloc_work+0x40/0x40 ? can_nocow_extent+0x490/0x490 ? kvm_clock_read+0x1f/0x30 ? can_nocow_extent+0x490/0x490 ? btrfs_run_delalloc_work+0x40/0x40 btrfs_direct_IO+0x227/0x400 ? btrfs_run_delalloc_work+0x40/0x40 generic_file_direct_write+0xcf/0x180 btrfs_file_write_iter+0x308/0x58c aio_write+0xf8/0x1d0 ? kvm_clock_read+0x1f/0x30 ? __might_fault+0x3e/0x90 io_submit_one+0x3a9/0x620 ? io_submit_one+0xe5/0x620 __ia32_compat_sys_io_submit+0xb2/0x270 do_int80_syscall_32+0x5b/0x1a0 entry_INT80_compat+0x88/0xa0 CC: [email protected] # 4.14+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit ebaf39e ] The *_frag_reasm() functions are susceptible to miscalculating the byte count of packet fragments in case the truesize of a head buffer changes. The truesize member may be changed by the call to skb_unclone(), leaving the fragment memory limit counter unbalanced even if all fragments are processed. This miscalculation goes unnoticed as long as the network namespace which holds the counter is not destroyed. Should an attempt be made to destroy a network namespace that holds an unbalanced fragment memory limit counter the cleanup of the namespace never finishes. The thread handling the cleanup gets stuck in inet_frags_exit_net() waiting for the percpu counter to reach zero. The thread is usually in running state with a stacktrace similar to: PID: 1073 TASK: ffff880626711440 CPU: 1 COMMAND: "kworker/u48:4" #5 [ffff880621563d48] _raw_spin_lock at ffffffff815f5480 #6 [ffff880621563d48] inet_evict_bucket at ffffffff8158020b torvalds#7 [ffff880621563d80] inet_frags_exit_net at ffffffff8158051c torvalds#8 [ffff880621563db0] ops_exit_list at ffffffff814f5856 torvalds#9 [ffff880621563dd8] cleanup_net at ffffffff814f67c0 torvalds#10 [ffff880621563e38] process_one_work at ffffffff81096f14 It is not possible to create new network namespaces, and processes that call unshare() end up being stuck in uninterruptible sleep state waiting to acquire the net_mutex. The bug was observed in the IPv6 netfilter code by Per Sundstrom. I thank him for his analysis of the problem. The parts of this patch that apply to IPv4 and IPv6 fragment reassembly are preemptive measures. Signed-off-by: Jiri Wiesner <[email protected]> Reported-by: Per Sundstrom <[email protected]> Acked-by: Peter Oskolkov <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c5a94f4 ] It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] torvalds#7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] torvalds#8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 torvalds#9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] torvalds#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 torvalds#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa torvalds#12 [ffff881ff43eff18] sys_read at ffffffff811fda62 torvalds#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 30522a9 ] Currently registering CvP managers works only for first probed CvP device, for all other devices it is refused due to duplicated chkcfg sysfs entry: fpga_manager fpga3: Altera CvP FPGA Manager @0000:0c:00.0 registered sysfs: cannot create duplicate filename '/bus/pci/drivers/altera-cvp/chkcfg' CPU: 0 PID: 3808 Comm: bash Tainted: G O 4.19.0-custom+ #5 Call Trace: dump_stack+0x46/0x5b sysfs_warn_dup+0x53/0x60 sysfs_add_file_mode_ns+0x16d/0x180 sysfs_create_file_ns+0x51/0x60 altera_cvp_probe+0x16f/0x2a0 [altera_cvp] local_pci_probe+0x3f/0xa0 ? pci_match_device+0xb1/0xf0 pci_device_probe+0x116/0x170 really_probe+0x21b/0x2c0 driver_probe_device+0x4b/0xe0 bind_store+0xcb/0x130 kernfs_fop_write+0xfd/0x180 __vfs_write+0x21/0x150 ? selinux_file_permission+0xdc/0x130 vfs_write+0xa8/0x1a0 ? find_vma+0xd/0x60 ksys_write+0x3d/0x90 do_syscall_64+0x44/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... altera-cvp 0000:0c:00.0: Can't create sysfs chkcfg file fpga_manager fpga3: fpga_mgr_unregister Altera CvP FPGA Manager @0000:0c:00.0 Move chkcfg creation to module init as suggested by Alan. Signed-off-by: Anatolij Gustschin <[email protected]> Acked-by: Alan Tull <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…ong enough [ Upstream commit ad66950 ] A session must only be released after all code that accesses the session structure has finished. Make sure that this is the case by introducing a new command counter per session that is only decremented after the .release_cmd() callback has finished. This patch fixes the following crash: BUG: KASAN: use-after-free in do_raw_spin_lock+0x1c/0x130 Read of size 4 at addr ffff8801534b16e4 by task rmdir/14805 CPU: 16 PID: 14805 Comm: rmdir Not tainted 4.18.0-rc2-dbg+ #5 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 do_raw_spin_lock+0x1c/0x130 _raw_spin_lock_irqsave+0x52/0x60 srpt_set_ch_state+0x27/0x70 [ib_srpt] srpt_disconnect_ch+0x1b/0xc0 [ib_srpt] srpt_close_session+0xa8/0x260 [ib_srpt] target_shutdown_sessions+0x170/0x180 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x200 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9c/0x110 [configfs] config_item_put+0x26/0x30 [configfs] configfs_rmdir+0x3b8/0x510 [configfs] vfs_rmdir+0xb3/0x1e0 do_rmdir+0x262/0x2c0 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Nicholas Bellinger <[email protected]> Cc: Mike Christie <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: David Disseldorp <[email protected]> Cc: Hannes Reinecke <[email protected]> Signed-off-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6347244 ] Since __sanitizer_cov_trace_const_cmp4 is marked as notrace, the function called from __sanitizer_cov_trace_const_cmp4 shouldn't be traceable either. ftrace_graph_caller() gets called every time func write_comp_data() gets called if it isn't marked 'notrace'. This is the backtrace from gdb: #0 ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:179 #1 0xffffff8010201920 in ftrace_caller () at ../arch/arm64/kernel/entry-ftrace.S:151 #2 0xffffff8010439714 in write_comp_data (type=5, arg1=0, arg2=0, ip=18446743524224276596) at ../kernel/kcov.c:116 #3 0xffffff8010439894 in __sanitizer_cov_trace_const_cmp4 (arg1=<optimized out>, arg2=<optimized out>) at ../kernel/kcov.c:188 #4 0xffffff8010201874 in prepare_ftrace_return (self_addr=18446743524226602768, parent=0xffffff801014b918, frame_pointer=18446743524223531344) at ./include/generated/atomic-instrumented.h:27 #5 0xffffff801020194c in ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:182 Rework so that write_comp_data() that are called from __sanitizer_cov_trace_*_cmp*() are marked as 'notrace'. Commit 903e8ff ("kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace") missed to mark write_comp_data() as 'notrace'. When that patch was created gcc-7 was used. In lib/Kconfig.debug config KCOV_ENABLE_COMPARISONS depends on $(cc-option,-fsanitize-coverage=trace-cmp) That code path isn't hit with gcc-7. However, it were that with gcc-8. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Anders Roxell <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Co-developed-by: Arnd Bergmann <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4ffcbfa ] KMSAN reported batadv_interface_tx() was possibly using a garbage value [1] batadv_get_vid() does have a pskb_may_pull() call but batadv_interface_tx() does not actually make sure this did not fail. [1] BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 __netdev_start_xmit include/linux/netdevice.h:4356 [inline] netdev_start_xmit include/linux/netdevice.h:4365 [inline] xmit_one net/core/dev.c:3257 [inline] dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273 __dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876 packet_snd net/packet/af_packet.c:2928 [inline] packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441889 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889 RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0 R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220 sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083 packet_alloc_skb net/packet/af_packet.c:2781 [inline] packet_snd net/packet/af_packet.c:2872 [inline] packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: c6c8fea ("net: Add batman-adv meshing protocol") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Cc: Marek Lindner <[email protected]> Cc: Simon Wunderlich <[email protected]> Cc: Antonio Quartulli <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

wildea01 and others added 30 commits January 5, 2018 22:47

arm64: KVM: Use per-CPU vector when BP hardening is enabled

d66d032

Now that we have per-CPU vectors, let's plug then in the KVM/arm64 code. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>

ardbiesheuvel closed this Jan 8, 2018

ardbiesheuvel deleted the rpk-v4.14-meltdown-spectre-mitigations branch January 8, 2018 20:23

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Rpk v4.14 meltdown spectre mitigations #5

Rpk v4.14 meltdown spectre mitigations #5

ardbiesheuvel commented Jan 5, 2018

ndechesne commented Jan 8, 2018

ardbiesheuvel commented Jan 8, 2018 via email

ndechesne commented Jan 8, 2018

ardbiesheuvel commented Jan 9, 2018 via email

Rpk v4.14 meltdown spectre mitigations #5

Rpk v4.14 meltdown spectre mitigations #5

Conversation

ardbiesheuvel commented Jan 5, 2018

ndechesne commented Jan 8, 2018

ardbiesheuvel commented Jan 8, 2018 via email

ndechesne commented Jan 8, 2018

ardbiesheuvel commented Jan 9, 2018 via email