Contact: Ruibang Luo, Zhenxian Zheng
Email: [email protected], [email protected]
ClairS is a somatic variant caller designed for paired samples and primarily ONT long-read. It uses Clair3 to eliminate germline variants. It ensembles the pileup and full-alignment models in Clair3, trusts them equally, and decides on the result using a set of rules and post-processing filters. With 50-fold HCC1395 (tumor) and 25-fold HCC1395BL (normal) of ONT R10.4.1 data, benchmarking against the truth SNVs (Fang et al., 2021), ClairS achieved 86.86%/93.01% recall/precision rate for SNVs when targeting VAF ≥0.05. For variants with VAF ≥0.2, the numbers go up to 94.65%/96.63%. Detailed performance figures are shown below.
ClairS means Clair-Somatic, or the masculine plural of "Clair" in french (thus, 's' is silent).
The logo of ClairS was generated using DALL-E 2 with prompt "A DNA sequence with genetic variant that looks like a letter 'S'".
A preprint describing ClairS's algorithms and results is at bioRxiv.
For germline variant calling, please try Clair3.
For somatic variant calling using tumor only sample, please try ClairS-TO.
The latest performance figures as of Oct 10th, 2024 (ClairS v0.4.0) is available in this technical note.
Performance comparison between “ClairS v0.4.0 with the SS model”, “ClairS v0.4.0 with the SS+RS model”, and “DeepSomatic v1.7.0”, at (a) different coverages, and (b) at different AF ranges for SNV and Indel, respectively.
- HCC1395/HCC1395BL tumor/normal of PacBio Revio data, using SMRTbell prep kit 3.0
- Truth:High confidence (HighConf) and medium confidence (MedConf) SNV from the SEQC2 HCC1395/BL truths (Fang et al., 2021), the TVAF (tumor variant allele frequency) of which is ≥0.05 in the above dataset
The performance of ClairS at multiple VAF ranges and multiple tumor coverages with the normal coverage fixed at 25x
The performance of ClairS at multiple VAF ranges and multiple normal coverages with the tumor coverage fixed at 50x
- HCC1395/HCC1395BL tumor/normal of of Illumina NovaSeq 6000 and HiSeq 4000 data
- Truth:High confidence (HighConf) and medium confidence (MedConf) SNV from the SEQC2 HCC1395/BL truths (Fang et al., 2021), the TVAF (tumor variant allele frequency) of which is ≥0.05 in the above dataset
The precision-recall curve of different tumor/normal purity combinations with tumor coverage fixed at 50x and normal coverage fixed at 25x
v0.4.0 (Oct 11) : This version is a major update. The new features and benchmarks are explained in a technical note titled “Improving the performance of ClairS and ClairS-TO with new real cancer cell-line datasets and PoN”. A summary of changes: 1. Starting from this version, ClairS will provide two model types. ssrs is a model trained initially with synthetic samples and then real samples augmented (e.g., ont_r10_dorado_sup_5khz_ssrs), ss is a model trained from synthetic samples (e.g., ont_r10_dorado_sup_5khz_ss). The ssrs model provides better performance and fits most usage scenarios. ss model can be used when missing a cancer-type in model training is a concern. In v0.4.0, four real cancer cell-line datasets (HCC1937/BL, HCC1954/BL, H1437/BL, and H2009/BL) covering two cancer types (breast cancer, lung cancer) published by Park et al. were used for ssrs model training. 2. Added BQ jittering in model training to address the BQ distribution difference between the training and calling datasets that leads to performance drop. 3. Added the --indel_min_af option and adjusted the default minimum allelic fraction requirement to 0.1 for Indels in ONT platform.
v0.3.1 (Aug 16) : 1. Added four options i. --use_heterozygous_snp_in_tumor_sample_and_normal_bam_for_intermediate_phasing, ii. --use_heterozygous_snp_in_normal_sample_and_normal_bam_for_intermediate_phasing, iii. --use_heterozygous_snp_in_tumor_sample_and_tumor_bam_for_intermediate_phasing, and iv. --use_heterozygous_snp_in_normal_sample_and_tumor_bam_for_intermediate_phasing. iii is equivalent to --use_heterozygous_snp_in_tumor_sample_for_intermediate_phasing added in v0.2.0. iv is equivalent to --use_heterozygous_snp_in_normal_sample_for_intermediate_phasing added in v0.2.0. Use normal bam for intermediate phasing was a request from @Sergey Aganezov. When the coverage of normal and tumor are similar, using normal bam for intermediate phasing has negligible difference from using tumor bam in our experiments using HCC1395/BL. 2. Added --haplotagged_tumor_bam_provided_so_skip_intermediate_phasing_and_haplotagging to use the haplotype information provided in the tumor bam directly and skip intermediate phasing and haplotagging. This option is useful when using ClairS in a pipeline in which the phasing of the tumor bam is done before running ClairS. BAM haplotagged by WhatsHap and LongPhase are accepted. 3. Bumped up Clair3 dependency to version 1.0.10, LongPhase to version 1.7.3.
v0.3.0 (Jul 5) : 1. Added a module called “verdict” (Option --enable_verdict) to statistically classify a called variant into either a germline, somatic, or subclonal somatic variant based on the CNV profile and tumor purity estimation. Please find out more technical details about the Verdict module here. 2. Improved model training speed, reduced model training time cost by about three times.
v0.2.0 (Apr 29) : 1. Added --use_heterozygous_snp_in_normal_sample_for_intermediate_phasing/--use_heterozygous_snp_in_tumor_sample_for_intermediate_phasing option to support using either heterozygous SNPs in the normal sample or tumor sample for intermediate phasing. The previous versions used in_tumor_sample for phasing. In this new version, when testing with ONT 4kkz HCC1395/BL and using in_normal_sample for intermediate phasing, the SNV precision improved ~2%, while recall remained unchanged. in_normal_sample becomes the default from this version. However, if the coverage of normal sample is low, please consider switching back to using in_tumor_sample (#22, idea contributed by the longphase team @sloth-eat-pudding). 2. Added --use_heterozygous_indel_for_intermediate_phasing to include high quality heterozygous Indels for intermediate phasing. With this new option, the haplotagged tumor reads increased by ~3% in ONT 4khz HCC1395/BL, the option becomes default from this version. 3. Added a model that might provide a slightly better performance for liquid tumor. In this release, only ONT Dorado 5khz HAC for liquid tumor (-p ont_r10_dorado_hac_5khz_liquid) is provided. The model was trained with slightly higher normal contamination. We are testing out the new model with collaborator. 4. Added --use_longphase_for_intermediate_haplotagging option to replace WhatsHap haplotagging by LongPhase haplotagging to speed up read haplotagging process, the option becomes default from this version. 5. Bumped up Clair3 dependency to version 1.0.7, LongPhase to version 1.7.
v0.1.7 (Jan 25, 2024) : 1. Added ONT Dorado 5khz HAC (-p ont_r10_dorado_hac_5khz) and Dorado 4khz HAC (-p ont_r10_dorado_hac_4khz) model, renamed all ONT Dorado SUP model, check here for more details. 2. Enabled somatic variant calling in sex chromosomes. 3. Added FAU, FCU, FGU, FTU, RAU, RCU, RGU, and RTU tags.
v0.1.6 (Sep 18) : 1. Fixed an output bug that caused no VCF output if no Indel candidate was found (contributor @Khi Pin). 2. Fixed showing incorrect reference allele depth at a deletion region. 3. Added PacBio HiFi quick demo.
v0.1.5 (Aug 2) : 1. Updated SNV calling using ONT Dorado 4kHz data with a new model trained using multiple-sample pairs (HG003/4); 2. Updated SNV calling using ONT Dorado 5kHz data with a new model trained using multiple-sample pairs (HG001/HG002, HG003/4); 3. Support somatic indel calling using ONT Dorado 4kHz data. 4. Support somatic indel calling using ONT Dorado 5kHz data.
v0.1.4 (Jul 15) : 1. Added reference depth in AD tag. 2. Added HiFi Sequel II Indel model.
v0.1.3 (Jul 5) : Added ONT Dorado 4khz (-p ont_r10_dorado_4khz) and 5khz (-p ont_r10_dorado_5khz) models, check here for more details. Renamed platform options ont_r10 to ont_r10_guppy and ont_r9 to ont_r9_guppy.
v0.1.2 (May 17) : Added HiFi Revio model, renamed HiFi Sequel II model from hifi to hifi_sequel2.
v0.1.1 (Apr 30) : 1. Added the "command line used" to VCF header. 2. Added NAU, NCU, NGU, and NTU tags (#reads supporting the four bases in normal) to the output. 3. Hybrid calling mode now outputs three VCFs, ClairS somatic variant calls, Clair3 normal germline variant calls, and Clair3 tumor germline variant calls. 4. Added the --enable_clair3_germline_output option to also output Clair3 normal germline variant calls, and Clair3 tumor germline variant calls (even when hybrid calling more is not enabled). Running time will increase by ~40%.
v0.1.0 (Mar 24) : 1. Added support for Indel calling. ClairS Indel calling currently only supports ONT R10 data. To enable, use the --enable_indel_calling option. The Indel F1-score is ~73% with 50x/50x HCC1395/BL data. 2. Added an experimental --normal_vcf_fn to skip germline variant calling on normal BAM (#7, contributor @Xingyao). 3. Added --hybrid_mode_vcf_fn option to enable hybrid calling mode that combines de novo calling results and genotyping results without running the tool twice. Renamed the --vcf_fn to --genotyping_mode_vcf_fn for clarification. 4. Fixed a memory issue, memory consumption is now sub 100G for high coverage samples. 5. Fixed a conda environment issue in Singularity (#3). 6. Fixed zero division when no SNV was found (#2, #5). 7. Added AD tag in the output.
v0.0.1 (Jan 29, 2023): Initial release for early access.
- Oxford Nanopore (ONT) Q20+ data as input, see ONT Quick Demo.
- PacBio HiFi Revio data as input, see PacBio HiFi Quick Demo.
- Illumina NGS data as input, see Illumina Quick Demo.
After following installation, you can run ClairS with one command:
./run_clairs -T tumor.bam -N normal.bam -R ref.fa -o output -t 8 -p ont_r10_guppy
## Final output file: output/output.vcf.gzCheck Usage for more options.
ClairS trained both pileup and full-alignment models using GIAB samples, and carry on benchmarking on HCC1395-HCC1395BL pair dataset. All models were trained with chr20 excluded (including only chr1-19, 21, 22).
| Platform | Model name | Chemistry /Instruments | Basecaller | Option (-p/--platform) |
Reference | Aligner |
|---|---|---|---|---|---|---|
| ONT1 | r1041_e82_400bps_sup_v420 | R10.4.1, 5khz | Dorado SUP | ont_r10_dorado_sup_5khz_ssrs |
GRCh38_no_alt | Minimap2 |
| ONT1 | r1041_e82_400bps_sup_v420 | R10.4.1, 5khz | Dorado SUP | ont_r10_dorado_sup_5khz_ss |
GRCh38_no_alt | Minimap2 |
| ONT | r1041_e82_400bps_sup_v410 | R10.4.1, 4khz | Dorado SUP | ont_r10_dorado_sup_4khz |
GRCh38_no_alt | Minimap2 |
| ONT | r1041_e82_400bps_hac_v420 | R10.4.1, 5khz | Dorado HAC | ont_r10_dorado_hac_5khz |
GRCh38_no_alt | Minimap2 |
| ONT | r1041_e82_400bps_hac_v410 | R10.4.1, 4khz | Dorado HAC | ont_r10_dorado_hac_4khz |
GRCh38_no_alt | Minimap2 |
| ONT | r104_e81_sup_g5015 | R10.4/R10.4.1, 4khz | Guppy5 SUP | ont_r10_guppy |
GRCh38_no_alt | Minimap2 |
| ONT 2 | r941_prom_sup_g5014 | R9.4.1, 4khz | Guppy5 SUP | ont_r9_guppy |
GRCh38_no_alt | Minimap2 |
| Illumina | ilmn | NovaSeq/HiseqX | - | ilmn |
GRCh38 | BWA-MEM |
| PacBio HiFi 3 | hifi_sequel2 | Sequel II with Chemistry 2.0 | - | hifi_sequel2 |
GRCh38_no_alt | Minimap2 |
| PacBio HIFI | hifi_revio | Revio with SMRTbell prep kit 3.0 | - | hifi_revio |
GRCh38_no_alt | Minimap2 |
Caveats 1: Starting from v0.4.0 version, ClairS will provide two model types. ssrs is a model trained initially with synthetic samples and then real samples augmented (e.g., ont_r10_dorado_sup_5khz_ssrs), ss is a model trained from synthetic samples (e.g., ont_r10_dorado_sup_5khz_ss). The ssrs model provides better performance and fits most usage scenarios. ss model can be used when missing a cancer-type in model training is a concern. In v0.4.0, four real cancer cell-line datasets (HCC1937, HCC1954, H1437, and H2009) covering two cancer types (breast cancer, lung cancer) published by Park et al. were used for ssrs model training.
Caveats 2: Although the r9(r941_prom_sup_g5014) model was trained on synthetic samples with r9.4.1 real data, the minimal AF cutoff, minimal coverage, and post-calling filtering parameters for the r9 model are copied from the r10 model, and are not optimized due to lack of real r9 data on a cancer sample with known truths.
Caveats 3: The PacBio HiFi Sequel II model is experimental. It was trained but not tested with any real data with known truths. HG003 54x and HG004 52x were used, thus tumor depth coverage higher than 50x may suffer from lower recall rate. For testing, please downsample both tumor and normal to ~40x for the best performance of this experimental model.
A pre-built docker image is available at DockerHub.
Caution: Absolute path is needed for both INPUT_DIR and OUTPUT_DIR in docker.
docker run -it \
-v ${INPUT_DIR}:${INPUT_DIR} \
-v ${OUTPUT_DIR}:${OUTPUT_DIR} \
hkubal/clairs:latest \
/opt/bin/run_clairs \
--tumor_bam_fn ${INPUT_DIR}/tumor.bam \ ## use your tumor bam file name here
--normal_bam_fn ${INPUT_DIR}/normal.bam \ ## use your normal bam file name here
--ref_fn ${INPUT_DIR}/ref.fa \ ## use your reference file name here
--threads ${THREADS} \ ## maximum threads to be used
--platform ${PLATFORM} \ ## options: {ont_r10_dorado_sup_4khz, ont_r10_dorado_sup_5khz, ont_r10_guppy, ont_r9_guppy, ilmn, hifi_sequel2, hifi_revio, etc}
--output_dir ${OUTPUT_DIR} ## output path prefix Check Usage for more options.
Caution: Absolute path is needed for both INPUT_DIR and OUTPUT_DIR in singularity.
INPUT_DIR="[YOUR_INPUT_FOLDER]" # e.g. /home/user1/input (absolute path needed)
OUTPUT_DIR="[YOUR_OUTPUT_FOLDER]" # e.g. /home/user1/output (absolute path needed)
mkdir -p ${OUTPUT_DIR}
conda config --add channels defaults
conda create -n singularity-env -c conda-forge singularity -y
conda activate singularity-env
# singularity pull docker pre-built image
singularity pull docker://hkubal/clairs:latest
# run the sandbox like this afterward
singularity exec \
-B ${INPUT_DIR},${OUTPUT_DIR} \
clairs_latest.sif \
hkubal/clairs:latest \
/opt/bin/run_clairs \
--tumor_bam_fn ${INPUT_DIR}/tumor.bam \ ## use your tumor bam file name here
--normal_bam_fn ${INPUT_DIR}/normal.bam \ ## use your normal bam file name here
--ref_fn ${INPUT_DIR}/ref.fa \ ## use your reference file name here
--threads ${THREADS} \ ## maximum threads to be used
--platform ${PLATFORM} \ ## options: {ont_r10_dorado_sup_4khz, ont_r10_dorado_sup_5khz, ont_r10_guppy, ont_r9_guppy, ilmn, hifi_sequel2, hifi_revio, etc}
--output_dir ${OUTPUT_DIR} \ ## output path prefix
--conda_prefix /opt/conda/envs/clairsCheck here to install the tools step by step.
Anaconda install:
Please install anaconda using the official guide or using the commands below:
wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh
chmod +x ./Miniconda3-latest-Linux-x86_64.sh
./Miniconda3-latest-Linux-x86_64.shInstall ClairS using anaconda step by step:
# create and activate an environment named clairs
# install pypy and packages in the environemnt
conda create -n clairs -c bioconda -c pytorch -c conda-forge pytorch tqdm clair3-illumina python=3.9.0 -y
source activate clairs
git clone https://github.com/HKU-BAL/ClairS.git
cd ClairS
# make sure in conda environment
# download pre-trained models
echo ${CONDA_PREFIX}
mkdir -p ${CONDA_PREFIX}/bin/clairs_models
wget http://www.bio8.cs.hku.hk/clairs/models/clairs_models.tar.gz
tar -zxvf clairs_models.tar.gz -C ${CONDA_PREFIX}/bin/clairs_models/
./run_clairs --helpThis is the same as option 1 except that you are building a docker image yourself. Please refer to option 1 for usage.
git clone https://github.com/HKU-BAL/ClairS.git
cd ClairS
# build a docker image named hkubal/clairs:latest
# might require docker authentication to build docker image
docker build -f ./Dockerfile -t hkubal/clairs:latest .
# run the docker image like option 1
docker run -it hkubal/clairs:latest /opt/bin/run_clairs --help./run_clairs \
--tumor_bam_fn ${INPUT_DIR}/tumor.bam \ ## use your tumor bam file name here
--normal_bam_fn ${INPUT_DIR}/normal.bam \ ## use your bam file name here
--ref_fn ${INPUT_DIR}/ref.fa \ ## use your reference file name here
--threads ${THREADS} \ ## maximum threads to be used
--platform ${PLATFORM} \ ## options: {ont_r10_dorado_sup_4khz, ont_r10_dorado_sup_5khz, ont_r10_guppy, ont_r9_guppy, ilmn, hifi_sequel2, hifi_revio, etc}
--output_dir ${OUTPUT_DIR} ## output path prefix
## Final output file: ${OUTPUT_DIR}/output.vcf.gzRequired parameters:
-T, --tumor_bam_fn TUMOR_BAM_FN Tumor BAM file input. The input file must be samtools indexed.
-N, --normal_bam_fn NORMAL_BAM_FN Normal BAM file input. The input file must be samtools indexed.
-R, --ref_fn FASTA Reference file input. The input file must be samtools indexed.
-o, --output_dir OUTPUT_DIR VCF output directory.
-t, --threads THREADS Max #threads to be used.
-p, --platform PLATFORM Select the sequencing platform of the input. Possible options {ont_r10_dorado_sup_4khz, ont_r10_dorado_sup_5khz, ont_r10_dorado_hac_5khz, ont_r10_dorado_hac_4khz, ont_r10_guppy, ont_r9_guppy, ilmn, hifi_sequel2, hifi_revio}.Miscellaneous parameters:
-P PILEUP_MODEL_PATH, --pileup_model_path PILEUP_MODEL_PATH
Specify the path to your own somatic calling pileup model.
-F FULL_ALIGNMENT_MODEL_PATH, --full_alignment_model_path FULL_ALIGNMENT_MODEL_PATH
Specify the path to your own somatic calling full-alignment model.
-c CTG_NAME, --ctg_name CTG_NAME
The name of the contigs to be processed. Split by ',' for multiple contigs. Default: all contigs will be processed.
-r REGION, --region REGION
A region to be processed. Format: `ctg_name:start-end` (start is 1-based).
-b BED_FN, --bed_fn BED_FN
Path to a BED file. Call variants only in the provided BED regions.
-G GENOTYPING_MODE_VCF_FN, --genotyping_mode_vcf_fn GENOTYPING_MODE_VCF_FN
VCF file input containing candidate sites to be genotyped. Variants will only be called at the sites in the VCF file if provided.
-H HYBRID_MODE_VCF_FN, --hybrid_mode_vcf_fn HYBRID_MODE_VCF_FN
Enable hybrid calling mode that combines the de novo calling results and genotyping results at the positions in the VCF file given.
-q QUAL, --qual QUAL If set, variants with >QUAL will be marked as PASS, or LowQual otherwise.
--snv_min_af SNV_MIN_AF
Minimal SNV AF required for a variant to be called. Decrease SNV_MIN_AF might increase a bit of sensitivity, but in trade of precision, speed and accuracy. Default: 0.05.
--min_coverage MIN_COVERAGE
Minimal coverage required for a variant to be called. Default: 4.
--chunk_size CHUNK_SIZE
The size of each chuck for parallel processing. Default: 5000000.
-s SAMPLE_NAME, --sample_name SAMPLE_NAME
Define the sample name to be shown in the VCF file. Default: SAMPLE.
--output_prefix OUTPUT_PREFIX
Prefix for output VCF filename. Default: output.
--remove_intermediate_dir
Remove intermediate directory before finishing to save disk space.
--include_all_ctgs Call variants on all contigs, otherwise call in chr{1..22} and {1..22}.
--print_ref_calls Show reference calls (0/0) in VCF file.
--print_germline_calls
Show germline calls in VCF file.
-d, --dry_run Print the commands that will be ran.
--python PYTHON Absolute path of python, python3 >= 3.9 is required.
--pypy PYPY Absolute path of pypy3, pypy3 >= 3.6 is required.
--samtools SAMTOOLS Absolute path of samtools, samtools version >= 1.10 is required.
--parallel PARALLEL Absolute path of parallel, parallel >= 20191122 is required.
--disable_phasing EXPERIMENTAL: Disable phasing with longphase or whatshap. Usually leads to significant performance loss.
--haplotagged_tumor_bam_provided_so_skip_intermediate_phasing_and_haplotagging
EXPERIMENTAL: Use haplotagged tumor bam as input, If enabled, will skip intermediate phasing and haplotagging, and the haplotype information
will be acquired from haplotagged tumor BAM. Default: disabled.
--normal_vcf_fn NORMAL_VCF_FN
EXPERIMENTAL: Path to normal VCF file. Setting this will skip germline varaint calling on normal BAM file input.
--enable_indel_calling
EXPERIMENTAL: Enable Indel calling, 'ont_r9_guppy' and 'ilmn' platforms are not supported. The calling time would increase significantly. default: disabled.
--enable_clair3_germline_output
EXPERIMENTAL: Use Clair3 default calling settings than Clair3 fast calling setting for tumor and normal germline varaint calling. The calling time would increase ~40 percent, Default: disabled.
--enable_verdict EXPERIMENTAL: Use Verdict to tag the germline variant in CNV regions. We suggest using the parameter only for sample with tumor purity lower than 0.8, Default: disabled
--use_heterozygous_snp_in_normal_sample_and_tumor_bam_for_intermediate_phasing USE_HETEROZYGOUS_SNP_IN_NORMAL_SAMPLE_AND_TUMOR_BAM_FOR_INTERMEDIATE_PHASING
EXPERIMENTAL: Use the heterozygous SNPs in normal VCF called by Clair3 and the tumor BAM for intermediate phasing. Option: {True, False}.
Default: True.
--use_heterozygous_snp_in_tumor_sample_and_tumor_bam_for_intermediate_phasing USE_HETEROZYGOUS_SNP_IN_TUMOR_SAMPLE_AND_TUMOR_BAM_FOR_INTERMEDIATE_PHASING
EXPERIMENTAL: Use the heterozygous SNPs in tumor VCF called by Clair3 and the tumor BAM for intermediate phasing. Option: {True, False}.
Default: False.
--use_heterozygous_snp_in_normal_sample_and_normal_bam_for_intermediate_phasing USE_HETEROZYGOUS_SNP_IN_NORMAL_SAMPLE_AND_NORMAL_BAM_FOR_INTERMEDIATE_PHASING
EXPERIMENTAL: Use the heterozygous SNPs in normal VCF called by Clair3 and the normal BAM for intermediate phasing. Option: {True, False}.
Default: False.
--use_heterozygous_snp_in_tumor_sample_and_normal_bam_for_intermediate_phasing USE_HETEROZYGOUS_SNP_IN_TUMOR_SAMPLE_AND_NORMAL_BAM_FOR_INTERMEDIATE_PHASING
EXPERIMENTAL: Use the heterozygous SNPs in tumor VCF called by Clair3 and the normal BAM for intermediate phasing. Option: {True, False}.
Default: False.
--use_heterozygous_indel_for_intermediate_phasing USE_HETEROZYGOUS_INDEL_FOR_INTERMEDIATE_PHASING
EXPERIMENTAL: Use the heterozygous Indels in normal and tumor VCFs called by Clair3 for intermediate phasing. Option: {True, False}. Default: True.
--use_longphase_for_intermediate_haplotagging USE_LONGPHASE_FOR_INTERMEDIATE_HAPLOTAGGING
EXPERIMENTAL: Use the longphase instead of whatshap for intermediate haplotagging. Option: {True, False}. Default: True.
--indel_output_prefix INDEL_OUTPUT_PREFIX
Prefix for Indel output VCF filename. Default: indel.
--indel_pileup_model_path INDEL_PILEUP_MODEL_PATH
Specify the path to your own somatic calling indel pileup model.
--indel_full_alignment_model_path INDEL_FULL_ALIGNMENT_MODEL_PATH
Specify the path to your own somatic calling indel full-alignment model../run_clairs -T tumor.bam -N normal.bam -R ref.fa -o output -t 8 -p ont_r10_guppy -C chr21,chr22./run_clairs -T tumor.bam -N normal.bam -R ref.fa -o output -t 8 -p ont_r10_guppy -r chr20:1000000-2000000./run_clairs -T tumor.bam -N normal.bam -R ref.fa -o output -t 8 -p ont_r10_guppy -G input.vcfWe highly recommended using BED file to define multiple regions of interest like:
echo -e "${CTG1}\t${START_POS_1}\t${END_POS_1}" > input.bed
echo -e "${CTG2}\t${START_POS_2}\t${END_POS_2}" >> input.bed
...Then:
./run_clairs -T tumor.bam -N normal.bam -R ref.fa -o output -t 8 -p ont_r10_guppy -B input.bedNOTE: the content of this research code repository (i) is not intended to be a medical device; and (ii) is not intended for clinical use of any kind, including but not limited to diagnosis or prognosis.