Add support for Waveshare ESP32-S3-Touch-LCD-4.3

[adampr1]

Add support for Waveshare ESP32-S3-Touch-LCD-4.3 from #602

[fvanroie]

Thanks

[manoranjan2050]

many thanks add this display to https://nightly.openhasp.com

[manoranjan2050]

any one please share pre compile bin

[adampr1]

1. Extract ZIP file end you get two bin file inside - "ws_esp32_s3_touch_lcd_4p3_full_8MB_v0.7.0-rc12_bbd96b2.bin" and "ws_esp32_s3_touch_lcd_4p3_ota_v0.7.0-rc12_bbd96b2.bin". "full" is to flash for the first time when no openhasp is installed.
2. Open web Tasmota flasher : https://tasmota.github.io/install/ in CHROME or EDGE browser.
3. Select "UPLOAD factory.bin"
4. Select file "ws_esp32_s3_touch_lcd_4p3_full_8MB_v0.7.0-rc12_bbd96b2.bin" form your PC
5. Click "connect" and select serial port where you have connected you display in BOOT mode (USB-C UART)
6. Select your device in pop-up window and then check ERASE DEVICE and then NEXT
7. Wait until finish then re-plug your usb cable and search on WiFi (with your tablet other mobile) new openHASP device and log in.

Those both file are compiled with support for modified hardware for BackLight (GPIO6) and 1000Hz for BackLight to prevent inductor noise.
Hope its help to start with our display
BR. Adam

ws_esp32_s3_touch_lcd_4p3_v0.7.0-rc12.zip

[fvanroie]

The latest build zip files can always be downloaded from the Actions Tab.

@adampr1 Did you make modifications to the ini file that is currently in this repository? If so, can you please share your updates.