Hardware Buttons

Opening the PandwaRF enclosure

You can access the buttons after opening the PandwaRF enclosure. Use a coin or similar tool as shown in the picture below.

Button positions on PandwaRF V3

Buttons	Short press	Long press (>2s)
SW1		Shutdown PandwaRF
SW2		Whitelist bypass mode
SW3		Factory reset + Whitelist clear procedure
SW4
SW5	Reset

Button positions on PandwaRF V4

Buttons	Short press	Long press (>2s)
Button 1		Whitelist bypass mode
Button 2
Button 3		Shutdown PandwaRF
Button 4		Factory reset + Whitelist clear procedure
ON/OFF	Reset

Whitelist bypass mode

Temporarily turn off usage of the whitelist until next connection. Pressing SW2 for 2s allows to connect to a phone which is not in whitelist. This is valid for a single connection. To be granted access to PandwaRF permanently, this phone must then bond.

Reset to default settings (factory reset)

To reset PandwaRF HW settings to factory values:

• Press SW3 for 2s or
• Press SW3 and press/release SW5 reset at the same time

Factory reset will:

• Delete all bonding information. This allows any phone to connect to PandwaRF.
• Disable Auto power off
• Stop autonomous action (brute force, etc...) (Rogue Pro/Rogue Gov only)
• Clear Alternative Advertizing Device name (Rogue Gov only)