[mbed-os-5.15] Bring in MIMXRT1050_EVK changes from feature-wisun branch #14326
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
1. No need to copy RAM functions, this is done in the startup file 2. Update memory config for the FLASH section 3. Configure the PMIC_STDBY pin 4. Update UART clock setting Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
1. Add defines to copy ram & no-cache functions 2. Add deep sleep latency definition Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
The SDK header provides separate arrays for high and low GPIO interrupts in place of the previous combined array Signed-off-by: Mahesh Mahadevan <[email protected]>
1. Run in doze mode 2. Add implementation for free function Signed-off-by: Mahesh Mahadevan <[email protected]>
The PIT module should be initialized only once Signed-off-by: Mahesh Mahadevan <[email protected]>
The UART first instance is 1 and not 0. Update the code logic to account for this. Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
These functions are used to READ/WRITE to the Flexspi NOR Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Reserve 4MB for mbed-os. The rest is used by storage driver Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
Signed-off-by: Mahesh Mahadevan <[email protected]>
1. Do not disable and enable osillators during deep sleep entry and exit 2. Increase the deep sleep to pass tests Signed-off-by: Mahesh Mahadevan <[email protected]>
NXP MIMXRT1050 EVK can support Hyper Flash or QSPI Flash with small hardware reworks. Modify the XIP file to support boot from the two kinds of Flash device. The Hyper Flash should be the default device and defined in tartgets.json with the macro "HYPERFLASH_BOOT". To select the QSPI Flash, just remove the macro with the below line in any overriding json file. "target.macros_remove" : ["HYPERFLASH_BOOT"] Signed-off-by: Gavin Liu <[email protected]>
The flash access may fail when implementing flash initialization. So there is risk for interrupt handler which linked in flash space. Add the critical section to avoid the risk. Signed-off-by: Gavin Liu <[email protected]>
The memset function from c library will be linked in flash space, it's risk for FLASHIAP. So I wrote flexspi_memset to replace the memset for IMX FLASHIAP, and put the function into targets/.../TARGET_IMX/flash_api.c file. All IMX Soc platforms can declare it as extern and use in their Soc flexspi driver files. Signed-off-by: Gavin Liu <[email protected]>
Update the flash driver to support both Hyper Flash and QSPI Flash. In addition, the static function cannot be linked to SRAM even defined by AT_QUICKACCESS_SECTION_CODE macro. So remove all "static" modifier for the FLASHIAP functions. Signed-off-by: Gavin Liu <[email protected]>
For the application(firmware) booted by bootloader(OTA), the image doesn't need the "flash_config" and "ivt" header. So update the link file to support both kinds of application (firmware) booted by bootROM and bootloader. In default, the compilation will get the image with "flash_config" and "ivt" header, for example the bootloader compiling. When compiling the OTA application image, please add the line as below in the mbed_app.json file. "target.macros_add" : ["MBED_APP_COMPILE"] This will remove the "flash_config" and "ivt" header in the final image. Signed-off-by: Gavin Liu <[email protected]>
JarkkoPaso
approved these changes
Feb 23, 2021
|
@artokin, thank you for your changes. |
mikaleppanen
approved these changes
Feb 25, 2021
mikter
approved these changes
Feb 25, 2021
|
This pull request has automatically been marked as stale because it has had no recent activity. @ARMmbed/mbed-os-maintainers, please start CI to get the PR merged. |
|
CI started |
Test run: SUCCESSSummary: 10 of 10 test jobs passed |
juhhei01
approved these changes
Mar 2, 2021
0xc0170
approved these changes
Mar 2, 2021
|
CI restarted |
Test run: SUCCESSSummary: 10 of 10 test jobs passed |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Summary of changes
Bring in MIMXRT1050_EVK related changes from the following pull requests made to feature-wisun branch:
PR #12562 (25 commits)
PR #12774 (6 commits)
PR #13063 (2 commits)
PR #13391 (2 commits)
PR #13526
PR #13569
PR #13927
These same changes are available in the Mbed OS master via PR: #14323
This PR ensures that target MIMXRT1050_EVK can be used with Pelion device management. Verified manually that pelion_border-router application (MIMXRT1050_EVK) connects to Pelion DM and other Wi-SUN nodes can connect to the Wi-SUN network.
Impact of changes
Migration actions required
Documentation
Pull request type
Test results
Reviewers