Add realtek rts5912 soc

soc/realtek/ec/CMakeLists.txt

@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+add_subdirectory(${SOC_SERIES})
+add_subdirectory(common)

soc/realtek/ec/Kconfig

@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+if SOC_FAMILY_REALTEK_EC
+
+menuconfig REALTEK_RTS5912_BOOTROM_HEADER
+	bool "Create BOOTROM header for RTS5912"
+	help
+	  The RTS5912 BOOTROM needs the information about boot up progress.
+	  Invoke the 'rts5912_imgtool' to generates the RTS5912 bootrom header.
+
+if REALTEK_RTS5912_BOOTROM_HEADER
+
+config REALTEK_HEADER_CHIP
+	string
+	default "RTS5912" if SOC_RTS5912
+
+DT_CHOSEN_Z_FLASH := zephyr,flash
+FLASH_BASE := $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_FLASH))
+
+config REALTEK_RTS5912_BOOTROM_HEADER_LOAD_ADDRESS
+	string "Set the address for BOOTROM"
+	default "$(FLASH_BASE) - 0x20"
+	help
+	  This address will be used by the RTS5912 BOOTROM to decide where firmware image start.
+
+endif # REALTEK_RTS5912_BOOTROM_HEADER
+
+# Select SoC Part No. and configuration options
+rsource "*/Kconfig"
+
+endif # SOC_FAMILY_REALTEK_EC

soc/realtek/ec/Kconfig.defconfig

@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+if SOC_FAMILY_REALTEK_EC
+
+rsource "*/Kconfig.defconfig.series"
+
+endif # SOC_FAMILY_REALTEK_EC

soc/realtek/ec/Kconfig.soc

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+config SOC_FAMILY_REALTEK_EC
+	bool
+
+config SOC_FAMILY
+	string
+	default "realtek_ec" if SOC_FAMILY_REALTEK_EC
+
+rsource "*/Kconfig.soc"

soc/realtek/ec/common/CMakeLists.txt

@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+zephyr_include_directories(.)
+
+if (DEFINED CONFIG_REALTEK_RTS5912_BOOTROM_HEADER)
+  math(EXPR adjustment "${CONFIG_REALTEK_RTS5912_BOOTROM_HEADER_LOAD_ADDRESS}" OUTPUT_FORMAT DECIMAL)
+  set(RTS5912_BIN_NAME ${CONFIG_KERNEL_BIN_NAME}.rts5912.bin)
+  set_property(GLOBAL APPEND PROPERTY extra_post_build_commands
+    COMMAND ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/soc/realtek/ec/common/rts5912_imgtool/img_gen.py
+    -L ${adjustment}
+    -I ${KERNEL_BIN_NAME}
+    -O ${RTS5912_BIN_NAME}
+    -V
+  )
+endif()

soc/realtek/ec/common/rts5912_imgtool/img_gen.py

@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+# Author: Dylan Hsieh <[email protected]>
+
+"""
+The RTS5912 specific image header shows the bootROM how to
+load the image from flash to internal SRAM, this script obtains
+the header to original BIN and output a new BIN file.
+"""
+
+import argparse
+import os
+import struct
+
+IMAGE_MAGIC = 0x524C544B  # ASCII 'RLTK'
+IMAGE_HDR_SIZE = 32
+RAM_LOAD = 0x0000020
+FREQ_50M = 0
+FREQ_25M = 1
+FREQ_12P5M = 2
+FREQ_6P25M = 3
+NORMAL_read = "0x03"
+DUAL_read = "0x3B"
+QUAD_read = "0x6B"
+
+
+def parse_args():
+    """
+    Parsing the arguments
+    """
+    parser = argparse.ArgumentParser(allow_abbrev=False)
+
+    parser.add_argument(
+        "-L",
+        "--load-addr",
+        type=int,
+        dest="load_addr",
+        help="Load address for image when it should run from RAM.",
+    )
+
+    parser.add_argument(
+        "-I",
+        "--input",
+        type=str,
+        dest="original_bin",
+        default="zephyr.bin",
+        help="Input bin file path",
+    )
+
+    parser.add_argument(
+        "-O",
+        "--output",
+        type=str,
+        dest="signed_bin",
+        default="zephyr.rts5912.bin",
+        help="Output bin file path",
+    )
+
+    parser.add_argument(
+        "-F",
+        "--spi-freq",
+        type=int,
+        dest="spi_freq",
+        choices=[FREQ_50M, FREQ_25M, FREQ_12P5M, FREQ_6P25M],
+        default=FREQ_6P25M,
+        help="Specify the frequency of SPI I/F.",
+    )
+
+    parser.add_argument(
+        "-R",
+        "--spi-rdcmd",
+        type=str,
+        dest="spi_rdcmd",
+        choices=[NORMAL_read, DUAL_read, QUAD_read],
+        default=NORMAL_read,
+        help="Specify the command for flash read.",
+    )
+
+    parser.add_argument("-V", "--verbose", action="count", default=0, help="Verbose Output")
+
+    ret_args = parser.parse_args()
+    return ret_args
+
+
+def img_gen(load_addr, spi_freq, spi_rdcmd, original_bin, signed_bin):
+    """
+    To obtain the RTS5912 image header and output a new BIN file
+    """
+    img_size = os.path.getsize(original_bin)
+    payload = bytearray(0)
+    img_size = os.path.getsize(original_bin)
+
+    fmt = (
+        "<"
+        +
+        # type ImageHdr struct {
+        "I"  # Magic    uint32
+        + "I"  # LoadAddr uint32
+        + "H"  # HdrSz    uint16
+        + "H"  # reserved uint16
+        + "I"  # ImgSz    uint32
+        + "I"  # Flags    uint32
+        + "I"  # reserved uint32
+        + "I"  # reserved uint32
+        + "B"  # SpiFmt   uint8
+        + "B"  # SpiRdCmd uint8
+        + "H"  # reserved uint16
+    )  # }
+
+    header = struct.pack(
+        fmt,
+        IMAGE_MAGIC,
+        load_addr,
+        IMAGE_HDR_SIZE,
+        0,
+        img_size,
+        RAM_LOAD,
+        0,
+        0,
+        0 + (int(spi_freq) << 2),
+        int(spi_rdcmd, 0),
+        0,
+    )
+
+    payload[: len(header)] = header
+
+    with open(signed_bin, "wb") as signed:
+        signed.write(payload)
+        signed.flush()
+        signed.close()
+
+    with open(signed_bin, "ab") as signed, open(original_bin, "rb") as original:
+        signed.write(original.read())
+        signed.flush()
+        signed.close()
+        original.close()
+
+
+def main():
+    """
+    Image generateor tool entry point
+    """
+    args = parse_args()
+    if args.verbose:
+        print(f"  Input = {args.original_bin}")
+        print(f"  Output = {args.signed_bin}")
+        print(f"  Load Address = {hex(args.load_addr)}")
+        print(f"  SPI Frequency = {args.spi_freq}")
+        print(f"  SPI Read Command = {args.spi_rdcmd}")
+    img_gen(
+        args.load_addr,
+        args.spi_freq,
+        args.spi_rdcmd,
+        args.original_bin,
+        args.signed_bin,
+    )
+
+
+if __name__ == "__main__":
+    main()

soc/realtek/ec/rts5912/CMakeLists.txt

@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+zephyr_include_directories(${ZEPHYR_BASE}/drivers)
+zephyr_sources(soc.c)
+zephyr_include_directories(.)
+
+zephyr_sources_ifdef(CONFIG_PM
+  device_power.c
+  power.c
+  )
+
+set(SOC_LINKER_SCRIPT ${ZEPHYR_BASE}/include/zephyr/arch/arm/cortex_m/scripts/linker.ld CACHE INTERNAL "")

soc/realtek/ec/rts5912/Kconfig

@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+config SOC_SERIES_RTS5912
+	select ARM
+	select CPU_CORTEX_M33
+	select SYS_CLOCK_EXISTS
+	select DYNAMIC_INTERRUPTS
+
+if SOC_SERIES_RTS5912
+
+config RTS5912_ON_ENTER_CPU_IDLE_HOOK
+	bool "CPU idle hook enable"
+	default y
+	imply ARM_ON_ENTER_CPU_IDLE_HOOK
+	help
+	  Enables a hook (z_arm_on_enter_cpu_idle()) that is called when
+	  the CPU is made idle (by k_cpu_idle() or k_cpu_atomic_idle()).
+	  If needed, this hook can be used to prevent the CPU from actually
+	  entering sleep by skipping the WFE/WFI instruction.
+
+endif # SOC_SERIES_RTS5912

soc/realtek/ec/rts5912/Kconfig.defconfig.rts5912

@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+if SOC_RTS5912
+
+config REALTEK_RTS5912_RTMR
+	default y
+
+if REALTEK_RTS5912_RTMR
+
+config PM
+	default y
+
+config SYS_CLOCK_HW_CYCLES_PER_SEC
+	default 32768
+
+config SYS_CLOCK_TICKS_PER_SEC
+	default 32768
+
+config ARCH_HAS_CUSTOM_BUSY_WAIT
+	default y
+
+endif # REALTEK_RTS5912_RTMR
+
+endif # SOC_RTS5912

soc/realtek/ec/rts5912/Kconfig.defconfig.series

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+if SOC_SERIES_RTS5912
+
+config NUM_IRQS
+	default 240
+
+rsource "Kconfig.defconfig.rts5912"
+
+endif # SOC_SERIES_RTS5912

soc/realtek/ec/rts5912/Kconfig.soc

@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+#
+
+config SOC_SERIES_RTS5912
+	bool
+	select SOC_FAMILY_REALTEK_EC
+	help
+	  Enable support for REALTEK EC MCU series
+
+config SOC_SERIES
+	default "rts5912" if SOC_SERIES_RTS5912
+
+config SOC_RTS5912
+	bool
+	select SOC_SERIES_RTS5912
+
+config SOC
+	default "rts5912" if SOC_RTS5912

soc/realtek/ec/rts5912/device_power.c

@@ -0,0 +1,26 @@
+/*
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+ * Author: Lin Yu-Cheng <[email protected]>
+ */
+
+#include <zephyr/logging/log.h>
+#include <zephyr/kernel.h>
+#include <zephyr/pm/pm.h>
+
+#include <reg/reg_system.h>
+#include "device_power.h"
+
+void before_rts5912_sleep(void)
+{
+	__disable_irq();
+	__set_BASEPRI(0);
+	__ISB();
+}
+
+void after_rts5912_sleep(void)
+{
+	__enable_irq();
+	__ISB();
+}

soc/realtek/ec/rts5912/device_power.h

@@ -0,0 +1,14 @@
+/*
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Copyright (c) 2024 Realtek Semiconductor Corporation, SIBG-SD7
+ * Author: Lin Yu-Cheng <[email protected]>
+ */
+
+#ifndef __DEVICE_POWER_H
+#define __DEVICE_POWER_H
+
+void before_rts5912_sleep(void);
+void after_rts5912_sleep(void);
+
+#endif