docs: error in mec15xxevb assy6853 in set up manual

Error in that manual. Header JP39 should have connected jumpers 1-2, 3-4. In docs I wrote that is to make sure JP39 does not have any jumper. Signed-off-by: Maksim Masalski <[email protected]>
zephyrproject-rtos · Jan 17, 2020 · 12e7295 · 12e7295
1 parent 74f9c23
commit 12e7295
Showing 1 changed file with 1 addition and 1 deletion.
diff --git a/boards/arm/mec15xxevb_assy6853/doc/index.rst b/boards/arm/mec15xxevb_assy6853/doc/index.rst
@@ -183,7 +183,7 @@ PVT SPI, SHD SPI and LED0-2 respectively.
 |          |          |        | 17-18     | 20-21    |         |
 +----------+----------+--------+-----------+----------+---------+
 
-.. note:: An additional setting for UART2 is to make sure JP39 does not have any jumper.
+.. note:: For UART2 make sure JP39 have jumpers connected 1-2, 3-4.
 
 To receive UART2 serial output, please refer to the picture below
 to make sure that JP9 configured for UART2 output.