Asterisk-integration

Asterisk integration for Home Assistant

This integration finds and adds all extensions to your Home Assistant and includes a card to call them from.

Roadmap

Things that are coming soon:

• GUI config
• More useful text
• Better styling
• Device triggers, conditions and actions
• More entities with information
• Support popup

Less priority:

• Channel entities
• PA/broadcast
• conference
• forward calls

I am open for suggestions!

Asterisk add-on

The upcoming Asterisk add-on will be fully supported by this integration.

Requirements

For this to work you will need the following:

• A sip/pbx server. (I use freepbx on a raspberry)
• Extension for every device.
• HACS on your Home Assistant.
• Create an AMI manager. For FreePBX look at https://github.com/TECH7Fox/Asterisk-integration/wiki/Setup-AMI-in-FreePBX.

Go to https://github.com/TECH7Fox/HA-SIP/wiki/Setup-FreePBX to see how to setup FreePBX for this card.

Installation

Download using HACS

1. Go to HACS
2. Click on the 3 points in the upper right corner and click on Custom repositories
3. Paste https://github.com/TECH7Fox/Asterisk-integration/ into Add custom repository URL and by category choose Integration
4. Click on add and check if the repository is there.
5. You should now see Asterisk integration. Click INSTALL
6. Restart Home Assistant.
7. Go to integrations and find Asterisk.
8. Fill in the fields and click add.
9. Check if the card loads succesfully.

Usage

Add the card by setting type to custom:sipjs-card.

type: custom:sipjs-card
server: 192.168.0.1
port: 8089
autoAnswer: true
video: true
ringtone: /local/asterisk/ringtone.mp3
backtone: /local/asterisk/backtone.mp3
entities:
  - entity: sensor.asterisk_extension_103
    person: person.someone
    secret: 1234
  - entity: sensor.asterisk_extension_104
    person: person.someone_else
    secret: 1234
dtmfs:
  - name: door
    signal: 1

• video: Enables remote video.
• server: Your Asterisk server.
• port: Sets the websocket port.
• autoAnswer: Answers any incoming call.
• ringtone: Path to ringtone. Used when being called. /local is your /www folder.
• backtone: Path to backtone. Used when calling. /local is your /www folder.
• dtmfs: Adds a button to send a ftmf signal in the current call.

Troubleshooting

Most problems is because your pbx server is not configured correct. To see how to configure FreePBX go to: https://github.com/TECH7Fox/HA-SIP/wiki/Setup-FreePBX

• For DTMF signalling to work, in FreePBX, change the dmtf signalling. For intercom purposes, "SIP-INFO DTMF-Relay" is needed.
• Android companion app 2022.2 required for speaker + audio permissions.
• Android companion app doesn't allow h264 video codec, make you disallow it on your softphone and/or Asterisk otherwise the call will fail with (remote busy error) If you want video in the companion app, use VP8 for instance

If you are still having problems you can make an issue, ask on the discord server or send me a email.

Contact

[email protected]