Skip to content

wolfBoot is a portable, OS-agnostic, secure bootloader for microcontrollers, supporting firmware authentication and firmware update mechanisms.

License

Notifications You must be signed in to change notification settings

wolfSSL/wolfBoot

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

wolfBoot

wolfSSL Secure Bootloader (Home page)

wolfBoot is a portable, OS-agnostic, secure bootloader solution for 32-bit microcontrollers, relying on wolfCrypt for firmware authentication, providing firmware update mechanisms.

Due to the minimalist design of the bootloader and the tiny HAL API, wolfBoot is completely independent from any OS or bare-metal application, and can be easily ported and integrated in existing embedded software projects to provide a secure firmware update mechanism.

Design based on RFC 9019 - A Firmware Update Architecture for Internet of Things.

Features

  • Multi-slot partitioning of the flash device
  • Integrity verification of the firmware image(s)
  • Authenticity verification of the firmware image(s) using wolfCrypt's Digital Signature Algorithms (DSA)
  • Minimalist hardware abstraction layer (HAL) interface to facilitate portability across different vendors/MCUs
  • Copy/swap images from secondary slots into the primary slots to consent firmware update operations
  • In-place chain-loading of the firmware image in the primary slot
  • Support of Trusted Platform Module(TPM)
  • Measured boot support, storing of the firmware image hash into a TPM Platform Configuration Register(PCR)

Components

This repository contains the following components:

wolfBoot bootloader

wolfBoot is a memory-safe standalone bare-metal application, designed to run on a generic microcontroller, with no dynamic memory allocation mechanism or linkage to any standard C library besides wolfCrypt.

The bootloader consists of the following components:

  • wolfCrypt, which is used to verify the signature of the images
  • A minimalist Hardware Abstraction Layer, with an implementation provided for the supported target, which is in charge for IAP flash access and clock setting on the specific MCU
  • The core bootloader
  • A small application library used by the application to interact with the bootloader src/libwolfboot.c

Integrating wolfBoot in an existing project

Required steps

Examples provided

Additional examples available on our GitHub wolfBoot-examples repository here.

The following steps are automated in the default Makefile target, using the baremetal test application as an example to create the factory image. By running make, the build system will:

  • Create a Ed25519 Key-pair using the ed25519_keygen tool
  • Compile the bootloader. The public key generated in the step above is included in the build
  • Compile the firmware image from the test application in test_app
  • Re-link the firmware to change the entry-point to the start address of the primary partition
  • Sign the firmware image using the ed25519_sign tool
  • Create a factory image by concatenating the bootloader and the firmware image

The factory image can be flashed to the target device. It contains the bootloader and the signed initial firmware at the specified address on the flash.

The sign.py tool transforms a bootable firmware image to comply with the firmware image format required by the bootloader.

For detailed information about the firmware image format, see Firmware image

For detailed information about the configuration options for the target system, see Compiling wolfBoot

Upgrading the firmware

  • Compile the new firmware image, and link it so that its entry point is at the start address of the primary partition
  • Sign the firmware using the sign.py tool and the private key generated for the factory image
  • Transfer the image using a secure connection, and store it to the secondary firmware slot
  • Trigger the image swap using libwolfboot wolfBoot_update_trigger() function. See wolfBoot library API for a description of the operation
  • Reboot to let the bootloader begin the image swap
  • Confirm the success of the update using libwolfboot wolfBoot_success() function. See wolfBoot library API for a description of the operation

For more detailed information about firmware update implementation, see Firmware Update

Additional features

Building

Makefile

To build using the Makefile, create a .config file with your build specifications in the wolfBoot root directory. You can find a number of examples that you can use inside config/examples. Then run make keytools to generate the signing and key generation tools. If you have wolfCrypt-py installed and would like to use it, you can skip this step.

Documentation for the flash configuration options used in .config can be found in docs/compile.md.

For example, to build using our provided stm32h7.config:

cp config/examples/stm32h7.config .config
make keytools
make

CMake

To build using CMake, create a build directory and run cmake with the target platform as well as values for the partition size and address variables. To build the test-apps, run with -DBUILD_TEST_APPS=yes. To use the wolfCrypt-py keytools, run with -DPYTHON_KEYTOOLS=yes.

For example, to build for the stm32h7 platform:

$ mkdir build
$ cd build
$ cmake -DWOLFBOOT_TARGET=stm32h7 -DBUILD_TEST_APPS=yes -DWOLFBOOT_PARTITION_BOOT_ADDRESS=0x8020000 -DWOLFBOOT_SECTOR_SIZE=0x20000 -DWOLFBOOT_PARTITION_SIZE=0xD0000 -DWOLFBOOT_PARTITION_UPDATE_ADDRESS=0x80F0000 -DWOLFBOOT_PARTITION_SWAP_ADDRESS=0x81C0000 ..
$ make

The output should look something like:

Scanning dependencies of target keystore
[  2%] Building signing tool
[  4%] Building keygen tool
[  7%] Generating keystore.c and signing private key
Keytype: ECC256
Gen /home/user/wolfBoot/build/wolfboot_signing_private_key.der
Generating key (type: ECC256)
Associated key file:   /home/user/wolfBoot/build/wolfboot_signing_private_key.der
Key type   :           ECC256
Public key slot:       0
Done.
[  7%] Built target keystore
Scanning dependencies of target public_key
[  9%] Building C object CMakeFiles/public_key.dir/keystore.c.o
[ 11%] Linking C static library libpublic_key.a
[ 14%] Built target public_key
Scanning dependencies of target wolfboothal
[ 16%] Building C object CMakeFiles/wolfboothal.dir/hal/stm32h7.c.o
[ 19%] Linking C static library libwolfboothal.a
[ 19%] Built target wolfboothal
Scanning dependencies of target wolfcrypt
[ 21%] Building C object lib/CMakeFiles/wolfcrypt.dir/wolfssl/wolfcrypt/src/integer.c.o
[ 23%] Building C object lib/CMakeFiles/wolfcrypt.dir/wolfssl/wolfcrypt/src/tfm.c.o
[ 26%] Building C object lib/CMakeFiles/wolfcrypt.dir/wolfssl/wolfcrypt/src/ecc.c.o
[ 28%] Building C object lib/CMakeFiles/wolfcrypt.dir/wolfssl/wolfcrypt/src/memory.c.o
[ 30%] Building C object lib/CMakeFiles/wolfcrypt.dir/wolfssl/wolfcrypt/src/wc_port.c.o
[ 33%] Building C object lib/CMakeFiles/wolfcrypt.dir/wolfssl/wolfcrypt/src/wolfmath.c.o
[ 35%] Building C object lib/CMakeFiles/wolfcrypt.dir/wolfssl/wolfcrypt/src/hash.c.o
[ 38%] Building C object lib/CMakeFiles/wolfcrypt.dir/wolfssl/wolfcrypt/src/sha256.c.o
[ 40%] Linking C static library libwolfcrypt.a
[ 40%] Built target wolfcrypt
Scanning dependencies of target wolfboot
[ 42%] Building C object CMakeFiles/wolfboot.dir/src/libwolfboot.c.o
[ 45%] Linking C static library libwolfboot.a
[ 45%] Built target wolfboot
Scanning dependencies of target image
[ 47%] Building C object test-app/CMakeFiles/image.dir/app_stm32h7.c.o
[ 50%] Building C object test-app/CMakeFiles/image.dir/led.c.o
[ 52%] Building C object test-app/CMakeFiles/image.dir/system.c.o
[ 54%] Building C object test-app/CMakeFiles/image.dir/timer.c.o
[ 57%] Building C object test-app/CMakeFiles/image.dir/startup_arm.c.o
[ 59%] Linking C executable image
[ 59%] Built target image
Scanning dependencies of target image_signed
[ 61%] Generating image.bin
[ 64%] Signing  image
wolfBoot KeyTools (Compiled C version)
wolfBoot version 10C0000
Update type:          Firmware
Input image:          /home/user/wolfBoot/build/test-app/image.bin
Selected cipher:      ECC256
Selected hash  :      SHA256
Public key:           /home/user/wolfBoot/build/wolfboot_signing_private_key.der
Output  image:        /home/user/wolfBoot/build/test-app/image_v1_signed.bin
Target partition id : 1
Calculating SHA256 digest...
Signing the digest...
Output image(s) successfully created.
[ 64%] Built target image_signed
Scanning dependencies of target image_outputs
[ 66%] Generating image.size
   text	   data	    bss	    dec	    hex	filename
   5284	    108	     44	   5436	   153c	/home/user/wolfBoot/build/test-app/image
[ 69%] Built target image_outputs
Scanning dependencies of target wolfboot_stm32h7
[ 71%] Building C object test-app/CMakeFiles/wolfboot_stm32h7.dir/__/src/string.c.o
[ 73%] Building C object test-app/CMakeFiles/wolfboot_stm32h7.dir/__/src/image.c.o
[ 76%] Building C object test-app/CMakeFiles/wolfboot_stm32h7.dir/__/src/loader.c.o
[ 78%] Building C object test-app/CMakeFiles/wolfboot_stm32h7.dir/__/src/boot_arm.c.o
[ 80%] Building C object test-app/CMakeFiles/wolfboot_stm32h7.dir/__/src/update_flash.c.o
[ 83%] Linking C executable wolfboot_stm32h7
[ 83%] Built target wolfboot_stm32h7
Scanning dependencies of target binAssemble
[ 85%] Generating bin-assemble tool
[ 85%] Built target binAssemble
Scanning dependencies of target image_boot
[ 88%] Generating wolfboot_stm32h7.bin
[ 90%] Signing  image
wolfBoot KeyTools (Compiled C version)
wolfBoot version 10C0000
Update type:          Firmware
Input image:          /home/user/wolfBoot/build/test-app/image.bin
Selected cipher:      ECC256
Selected hash  :      SHA256
Public key:           /home/user/wolfBoot/build/wolfboot_signing_private_key.der
Output  image:        /home/user/wolfBoot/build/test-app/image_v1_signed.bin
Target partition id : 1
Calculating SHA256 digest...
Signing the digest...
Output image(s) successfully created.
[ 92%] Assembling image factory image
[ 95%] Built target image_boot
Scanning dependencies of target wolfboot_stm32h7_outputs
[ 97%] Generating wolfboot_stm32h7.size
   text	   data	    bss	    dec	    hex	filename
  42172	      0	     76	  42248	   a508	/home/user/wolfBoot/build/test-app/wolfboot_stm32h7
[100%] Built target wolfboot_stm32h7_outputs

Signing and hashing algorithms can be specified with -DSIGN=<alg> and -DHASH=<alg>. To view additional options to configuring wolfBoot, add -LAH to your cmake command, along with the partition specifications.

$ cmake -DWOLFBOOT_TARGET=stm32h7 -DWOLFBOOT_PARTITION_BOOT_ADDRESS=0x8020000 -DWOLFBOOT_SECTOR_SIZE=0x20000 -DWOLFBOOT_PARTITION_SIZE=0xD0000 -DWOLFBOOT_PARTITION_UPDATE_ADDRESS=0x80F0000 -DWOLFBOOT_PARTITION_SWAP_ADDRESS=0x81C0000 -LAH ..
stm32f4
$ cmake -DWOLFBOOT_TARGET=stm32f4 -DWOLFBOOT_PARTITION_SIZE=0x20000 -DWOLFBOOT_SECTOR_SIZE=0x20000 -DWOLFBOOT_PARTITION_BOOT_ADDRESS=0x08020000 -DWOLFBOOT_PARTITION_UPDATE_ADDRESS=0x08040000 -DWOLFBOOT_PARTITION_SWAP_ADDRESS=0x08060000 ..
stm32u5
$ cmake -DWOLFBOOT_TARGET=stm32u5 -DBUILD_TEST_APPS=yes -DWOLFBOOT_PARTITION_BOOT_ADDRESS=0x08100000 -DWOLFBOOT_SECTOR_SIZE=0x2000 -DWOLFBOOT_PARTITION_SIZE=0x20000 -DWOLFBOOT_PARTITION_UPDATE_ADDRESS=0x817F000 -DWOLFBOOT_PARTITION_SWAP_ADDRESS=0x81FE000 -DNO_MPU=yes ..
stm32l0
$ cmake -DWOLFBOOT_TARGET=stm32l0 -DWOLFBOOT_PARTITION_BOOT_ADDRESS=0x8000 -DWOLFBOOT_SECTOR_SIZE=0x1000 -DWOLFBOOT_PARTITION_SIZE=0x10000 -DWOLFBOOT_PARTITION_UPDATE_ADDRESS=0x18000 -DWOLFBOOT_PARTITION_SWAP_ADDRESS=0x28000 -DNVM_FLASH_WRITEONCE=yes ..

Troubleshooting

  1. Python errors when signing a key:
Traceback (most recent call last):
  File "tools/keytools/keygen.py", line 135, in <module>
    rsa = ciphers.RsaPrivate.make_key(2048)
AttributeError: type object 'RsaPrivate' has no attribute 'make_key'
Traceback (most recent call last):
  File "tools/keytools/sign.py", line 189, in <module>
    r, s = ecc.sign_raw(digest)
AttributeError: 'EccPrivate' object has no attribute 'sign_raw'

You need to install the latest wolfcrypt-py here: https://github.com/wolfSSL/wolfcrypt-py

Use pip3 install wolfcrypt.

Or to install based on a local wolfSSL installation use:

cd wolfssl
./configure --enable-keygen --enable-rsa --enable-ecc --enable-ed25519 --enable-des3 CFLAGS="-DFP_MAX_BITS=8192 -DWOLFSSL_PUBLIC_MP"
make
sudo make install

cd wolfcrypt-py
USE_LOCAL_WOLFSSL=/usr/local pip3 install .
  1. Key algorithm mismatch:

The error Key algorithm mismatch. Remove old keys via 'make keysclean' indicates the current .config SIGN algorithm does not match what is in the generated src/keystore.c file. Use make keysclean to delete keys and regenerate.

Release Notes

v1.0 (2018-12-04)

  • Initial release with fail-safe update, HAL support for STM32 and nRF52

V1.1 (2019-03-27)

  • Added support for ECC-256 DSA
  • Added support for external (e.g. SPI) flash for Update/swap
  • Anti-rollback protection via version number
  • Hardware support
    • Added compile options for Cortex-M0
    • new HAL: Atmel SamR21
    • new HAL: TI cc26x2
    • new HAL: NXP/Freescale Kinetis SDK
  • Improved sign/update tools compatibility (windows)

V1.2 (2019-07-30)

  • Added support for multiple architectures
  • key generation and signing tools rewritten in python for portability
  • Added compile-time option to move flash-writing functions to RAM
  • Introduced the possibility for the bootloader to update itself
  • Fixed compile issues on macOS and WSL
  • Hardware support
    • Added RV32 RISC-V architecture
    • Added hardware-assisted dual-bank support on STM32F76x/77x
    • new HAL: RV32 FE310 (SiFive HiFive-1)
    • new HAL: STM32L0
    • new HAL: STM32G0
    • new HAL: STM32F7

V1.3 (2019-11-13)

  • New configuration mechanism based on make config, helps creating and storing target-specific configurations
    • Configuration examples provided for a number of existing platforms
  • fix bug in self-update mechanism when SPI flash is in use
  • Introduced support for hardware-assisted signature verification, using public-key hardware accelerators
    • Added support for STM32 PKA (e.g. STM32WB55)
    • Added support for Kinetis/Freescale PKHA (e.g. Kinetis K82F)

V1.4 (2020-01-06)

  • TPM2.0 support
    • Integration with wolfTPM
    • Extended STM32 SPI driver to support dual TPM/FLASH communication
    • Tested on STM32 with Infineon 9670
  • RSA 2048 bit digital signature verification
  • Hardware support
    • New HAL: STM32H7

V1.5 (2020-04-28)

  • RSA 4096 bit digital signature verification
  • SHA3
  • Portable C key management tools
  • Improved integration with Microsoft Windows
    • Visual Studio solution for key management tools
  • Support to compile with IAR
    • Fixed incompatible code
    • added IAR example project
  • New architecture: ARMv8 (64-bit)
    • ARM Cortex-A boot code compatible with TrustZone
    • Linux staging and device tree support
  • External flash abstraction
    • remote update partition accessed via UART
  • Hardware support
    • New HAL: raspberry-pi
    • New HAL: Xilinx Zynq+
    • New HAL: NXP LPC54xx

V1.6 (2020-08-25)

  • Support for encryption of external partitions
  • Support for MPU on ARM Cortex-M platforms
  • Support for using an RSA signature that includes ASN.1 encoded header
  • Support for bootloader updates from external flash: SPI functions can run from RAM
  • Added TPM RSA verify support
  • Added option to use software SHA in combination with TPM
  • Fix logic in emergency updates
  • Fix loop logic in bootloader update
  • Fix manifest header boundary checks (prevents parser overflows)
  • Improve sanity checks for aligned fields in manifest header
  • Add unit tests against manifest header parser
  • Fix Ed25519 signing tool
  • Fix RSA keygen tool
  • wolfTPM integration: improvements and bugfixes
  • Fix configuration and documentation for STM32WB
  • Fix alignment of trailers in NVM_FLASH_WRITEONCE mode
  • Fix uint16_t index overflow on platforms with very small flash pages
  • Fix for building C key tools on windows (Cygwin/MinGW/Visual Studio)
  • Fix in LPC driver: correct page alignment in flash write
  • Hardware support
    • New HAL: Cypress psoc6
    • Support for psoc6 Hardware crypto accelerator
    • SPI driver: Nordic nRF52

V1.7.1 (2021-02-03)

  • Added support for measured boot via TPM
  • Support for TZEN on Cortex-m33
  • Added option to disable backup/fallback
  • Added option FLAGS_HOME to store UPDATE flags in the BOOT partition
  • Zynq: added support for eFuse
  • Zynq: improved debugging
  • Xilinx: support for BSP QSPI driver
  • Updated user documentation
  • Extend coverage of automatic non-regression tests running on Jenkins
  • Fix wolfTPM integration: use custom settings
  • Fix Fallback operations when encryption is enabled
  • Fix DUALBANK mode on STM32L5xx
  • Fix maximum image size check
  • Fix in STM32H7 driver: workaround for error correction in flash writing
  • Hardware support
    • New ARCH: ARMv8-m (Cortex-m33)
    • New HAL: STM32L5xx
    • New HAL: NXP iMX-RT1060
    • SPI driver: STM32L0x3
    • Uart driver: STM32L0x3

V1.8 (2021-07-19)

  • Use SP math for RSA4096
  • Updated RSA to use inline operation and disable OAEP padding
  • Memory model: removed dependency on XMALLOC/XFREE for ECC and RSA operations
  • Added option WOLFBOOT_SMALL_STACK with hardcoded compile-time buffers
  • Added option SIGN=NONE to disable secure boot at compile time
  • Fix self-update documentation
  • Added test cases for configuration option combinations
  • Hardware support
    • New ARCH: PowerPC
    • New ARCH: ARM Cortex-R
    • New HAL: NXP T2080
    • New HAL: TI TMS570LC435
    • STM32H7: Correct BANK2 offset

V1.9 (2021-11-09)

  • Delta/incremental updates
  • Fixes for key tools
  • Updates IAR IDE project
  • Documentation updates and fixes
    • API function names to match code
    • STM32L5 updates
  • Hardware support
    • New HAL: STM32L4
    • TMS570LC43xx: Use NVM_FLASH_WRITEONCE for update progress and fix stack pointer initialization

V1.10 (2022-01-10)

  • Delta updates: expanded documentation + bug fixes
  • Support Ed448 for signature verification
  • Hardware support:
    • Secure memory mode for STM32G0
    • Fix for STM32L5 in dual-bank mode
    • UEFI support: wolfBoot as EFI application on x86_64
    • Fixed self-update in Cortex-R5
    • Fixed HW support regressions in PSOC-6 build

V1.11 (2022-04-05)

  • Mitigation against fault-injections and glitching attacks (https://www.wolfssl.com/secure-boot-glitching-attacks/)
  • Support AES128 and AES256 for update encryption
  • Support ECC384 signature verification
  • Support SHA2-384 for image hash
  • Fixed alignment of delta update fields in manifest
  • Image size propagated to sign tools
  • Added test automation based on renode.io and github actions
  • Hardware support
    • New HAL: STM32U5
    • New HAL: NXP i.MX-RT1050
    • Fix risc-V 32bit port (missing include)
    • Fix STM32L4 (VTOR alignments; clock setting clash in libwolfboot)
    • STM32H7: improve HAL and documentation

V1.12 (2022-07-26)

  • Encrypted delta updates
  • Support RSA3072 signature verification
  • Partition ID support to include custom additional images
  • New format to store multiple public keys, using keystore
  • Several fixes to keytools and IDE support
  • Added new test cases
  • Hardware support
    • New HAL: Simulated target for rapid tests

V1.13 (2022-11-08)

  • Fixed IAR sign script
  • Added support for encrypted self-update
  • Support for NAII 68PPC2 with NXP T2080 on DEOS
  • Fixed Xilinx QSPI support
  • Fixed API usage in external flash support for SPI/UART
  • Fixed bug in encrypted delta updates
  • Updated wolfCrypt to wolfSSL submodule v5.5.3

V1.14 (2022-12-30)

  • Added support for CMake build
  • STM32U5: Support for external flash
  • STM32H7: Support for QSPI flash
  • Support for NXP QoriQ P1021
  • Cleanups and improvements for DEOS support on t2080
  • Docker tests: refactoring
  • Github Actions: added build checks for most available configurations
  • Updated wolfTPM to v.2.7.0
  • Updated wolfCrypt to wolfSSL v.5.5.4

V1.15 (2023-04-13)

  • Refactor powerfail-safe update for NVMs without consecutive write operations
  • Support for SP math on AARCH64 targets
  • Fixed keygen.c exported public key size
  • Added more test cases and github actions
  • Updated wolfSSL to v.5.6.0
  • Hardware support:
    • OCTOSPI support (STM32)
    • Fixed STM32H7 UART, added UART debug
    • New HAL: Renesas RA6M4 (with IDE example projects)
    • New HAL: NXP i.MX-RT1064
    • Unified common code for NXP i.MX-RT10XX targets

V1.16 (2023-07-06)

  • New formats supported
    • Added ELF/ELF64 loader
  • Extended support for NXP P1021
    • eSPI support to access TPM
    • TPM root of trust
    • fixes to eLBC NAND driver
  • Improvements on PowerPC architecture
    • fixed PIC execution
    • support booting from RAM
    • refactor of update_ram.c logic
    • moved wolfBoot stack to DDR after DDR initialization
  • Rework of Renesas examples, adding HSM support
    • RA6M4 example project using SCE
    • RX72N example project using TSIP
    • Extended documentation
  • Bug fix: fix wrong partition selection with NVM_FLASH_WRITEONCE introduced in v.1.15
  • Testing: added test cases (delta + encrypt)
  • Documentation: fixed several spelling errors

V 2.0.0 - (2023-11-07)

  • New feature: post-quantum stateful hash-based signature schemes.
    • Support for LMS/HSS
    • Support for XMSS/XMSS^MT
  • New feature: PKCS11 engine in TrustZone-M secure mode
    • wolfBoot as secure-mode supervisor on ARMv8-M
  • New TPM features
    • TPM NV as root of trust
    • Password-based access to NV slots
    • Measured boot via PCR extensions
    • Sealing/unsealing NV based on externally signed PCR policy and/or password
  • New architecture: x86-64bit using FSP
    • Intel FSP support
    • Integration with TPM
    • Two-stages model with support for PCI enumeration, AHCI drivers, SATA lock mechanism
    • Multiboot2/ELF payload support
  • New hardware targets
    • Intel TigerLake in FSP mode
    • STM32C0
  • Bug fixing: core
    • Fixed several bugs in NVM_FLASH_WRITEONCE mode
    • Fixed bugs in delta updates
  • Improved support to existing targets
    • Fixed issues in TSIP project
    • Improved support for NXP QoriQ/p1021
    • Improved support for NXP T1084
    • Reworked SPI support for NXP RT1050
    • STM32L4: Fixed clock speed
    • ARMv7-m: improved assembly support for Cortex-M4
    • ARMv8-m: enabled assembly optimizations by default
  • Reworked keytools and build environment
    • Improved build experience for MacOS users
    • Fix for building in windows/minGW
    • Deprecated python keytools
    • Keytools: support multiple key formats, don't assume raw keys
    • Fixed bug in delta image generation
    • Keystore improvements: support multiple key format in the same keystore
  • Testing
    • Added new sets of power-failure automated tests on simulator target
    • Simulator: tests can now run on MacOS
    • Unit tests: improved coverage. Added gcov reports
    • Static analysis: added cppcheck tests, fixed all relevant warnings

V 2.0.2 - (2023-12-29)

  • Fixed bug in sign tool when using ECC keys
  • Improved documentation
  • Added customizable DCD for NXP targets

V 2.1.0 - (2024-04-16)

  • New features
    • Custom TLVs in manifest header for custom authenticated options
  • Bug fixes and improvements:
    • DUALBANK: fork bootloader only once
    • Improved NO_BACKUP mode, DISABLE BACKUP mode is now powerfail-safe
    • Fault-injection mitigation: added clobbers to assembly code
    • Post-quantum algorithms: fixed build issue with conflicting wolfCrypt version
  • New signature verification algorithm:
    • Added support for ECC521
  • New hardware targets:
    • Microchip ATSAM-E51, including DUALBANK support
    • Renesas RZN2L
    • NXP i.MX-RT1040
    • NXP MCXA-153
  • Improved support to existing targets:
    • Build fixes for TI-Hercules
    • Improved support for Integrity OS on NXP T1024
  • wolfTPM integration
    • Fixes in sealing/unsealing mechanism
  • Updated modules
    • wolfSSL v5.7.0
    • wolfPKCS11 v1.3.0
    • wolfTPM v3.2.0

V 2.2.0 - (2024-07-22)

  • New hardware targets
    • Add STM32H5 port with support for Dual-bank, OTP, TrustZone-M
    • Add native support for Renesas RX family, using gcc toolchain
  • Improvements to supported targets
    • NXP i.MX-RT:
      • New flash geometry configurations
      • Support for LPUART4
      • Add port for RT1061
      • Disable DCACHE upon flash access
      • Support for building with HAB
    • STM32:
      • Refactoring of TrustZone-M support
      • OTP driver for STM32H5/H7
      • Full firmware update demo on STM32H5
      • Add support for QSPI in STM32U5
    • Renesas RZ:
      • Add support for RSIP
    • x86-64 (FSP):
      • Improve x86-64 specific code, add features
      • Clean-up and re-arrange scripts for qemu demo
  • Post-quantum crypto
    • LMS and XMSS support now using native wolfCrypt implementation
  • Tools improvements
    • Keystore: now supports .der ECC key via --der
    • Add otp_primer firmware, to provision keystores in OTP
    • Add otp_gen tool to provide a pre-assembled keystore to flash into OTP
  • Bug fixes
    • Fix regression in x86-EFI builds
    • Fix setting VTOR_NS when staging a non-secure app/os from TrustZone
    • Fix delta updates: patches with invalid base versions were not discarded
    • Fix potential array bound overflow in NVM_FLASH_WRITEONCE mode
    • Fix dereferencing type-punned pointer in flash update

V 2.3.0 - (2024-10-31)

  • New hardware targets
    • New architecture: ARM Cortex-A 32 bit
    • Add support for Microchip ATSAMA5D3
    • Add support for Nordic nRF5340
    • Add support for Infineon AURIX TriCore TCxxx
    • Add support for 32-bit simulator target
  • Improvements to supported targets
    • Support for building HAB for i.MX-RT targets, fixed flash interaction, dcache invalidation
    • Fixes for Renesas RX: full flash erase, IRQ on boot, flash write
    • Raspberry Pi: add UART support
    • STM32: refactoring of the PKCS11 storage driver
    • Fixes for Xilinx Zynq+ build options
  • New features
    • Support for multiple key types in the same keystore
    • New algorithm: ML-DSA
    • Hybrid authentication (using one PQC in combination with ECC/RSA)
    • Full assembly optimizations for ARM targets, including SHA, AES, Chacha (ARMASM)
    • Benchmark scripts for performance testing
    • Unit test coverage drastically increased
  • Bug fixes
    • Fix multiple type-punned pointer dereferences
    • Fix for TPM to properly support more than one PCR
    • Fixed order of digests in the header: public key digest is now signed
  • Updated modules
    • wolfSSL v5.7.4
    • wolfTPM latest
    • wolfPKCS11 latest